UPDATE: @enewman17 and @talkingmonkeys have created a working Samsung keyboard for TouchWiz 4.4.2 for SGS3. It is located here in its own thread.
For historical purposes, below is my original attempt.
-------------------------
I updated my phone to @saranhai and @DocHoliday77 's 4.4.2 ND8 port. I have been using @enewman17's Note2 keyboard on Dandroid 4.1.2 for months, so I preferred to keep the same layout.
I used his 4.3 version and modded it to work on 4.4.2. I am not as experienced in smali as others on the forum, but I was able to get the keyboard working with no FCs (so far, been a few hours of use). Unfortunately, I had to remove a few references to "EmojiParser", so I cannot guarantee how well emojis will work; I never use them so I was not worried. If you report bugs, I can try to fix them, but I cannot guarantee it. As usual, logcats will be the best method.
As usual, I cannot be held responsible if your device bricks or you make a nuclear weapon using this keyboard. Make a nandroid, flash, and probably wipe the dalvik cache to be safe.
Let me also reiterate, I am not the original developer, @enewman17 is. He's been a great help to our community and graciously agreed to let me put this up. I simply modded his keyboard.
If you can improve it, by all means. If you can host it elsewhere, by all means. (It's hosted on my personal Dropbox, so I cannot guarantee uptime.)
FLASHABLE DOWNLOAD: HERE
md5: 289ad7707b9a4fc76ec357e3ceba34f7
I will gladly help with anything that comes up with this as much as I can. Well done getting it working man thank you :good:
@MercilessLTD not having any luck with this the keyboard won't show up. I think you might be missing something here
Ok. I'll look into it
Sent from my Garnet Red SGS III
Working great! Thanks
StockMOD KitKat on I747M
talkingmonkeys said:
I will gladly help with anything that comes up with this as much as I can. Well done getting it working man thank you :good:
@MercilessLTD not having any luck with this the keyboard won't show up. I think you might be missing something here
Click to expand...
Click to collapse
I added the md5. Can you check yours?
MercilessLTD said:
I added the md5. Can you check yours?
Click to expand...
Click to collapse
It wasn't correct but even redownloading it I'm not having much luck. It still won't appear at all. Thinking its something on my end but if you don't mind double checking it and uploading another one I'll try it later today.
talkingmonkeys said:
It wasn't correct but even redownloading it I'm not having much luck. It still won't appear at all. Thinking its something on my end but if you don't mind double checking it and uploading another one I'll try it later today.
Click to expand...
Click to collapse
Can also confirm it is not working. Running StockMod Kitkat by saranhai.
I have been searching everywhere tried about about 20 different keyboards and couldn't get any to stick until this one thanks bro awesome work
Any way to make it like light grey??
Hmmm... two works, two does not. Can I get a logcat?
Sent from my Garnet Red SGS III
MercilessLTD said:
Hmmm... two works, two does not. Can I get a logcat?
Sent from my Garnet Red SGS III
Click to expand...
Click to collapse
Im on stockmod 4.4 and its working awesome
MercilessLTD said:
Hmmm... two works, two does not. Can I get a logcat?
Sent from my Garnet Red SGS III
Click to expand...
Click to collapse
I would but I don't think it'll even show up in one. It doesn't even appear. But I randomly got an update for note 3 keyboard today
Which ROM are you using? Might be a mod in the framework
Sent from my Garnet Red SGS III
MercilessLTD said:
Which ROM are you using? Might be a mod in the framework
Sent from my Garnet Red SGS III
Click to expand...
Click to collapse
Mine going to try it on likewise tomorrow then see if I can get it working in my next build. That's what I was thinking was its just something that I did to my rom
Sent from my SGH-I747 using XDA Premium 4 mobile app
talkingmonkeys said:
Mine going to try it on likewise tomorrow then see if I can get it working in my next build. That's what I was thinking was its just something that I did to my rom
Sent from my SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I got it working after a clean flash of StockMod Rom. So, it might be something that was modified. So, far I installed most my mods and it is still working.
MercilessLTD said:
I updated my phone to @saranhai and @DocHoliday77 's 4.4.2 ND8 port. I have been using @enewman17's Note2 keyboard on Dandroid 4.1.2 for months, so I preferred to keep the same layout.
I used his 4.3 version and modded it to work on 4.4.2. I am not as experienced in smali as others on the forum, but I was able to get the keyboard working with no FCs (so far, been a few hours of use). Unfortunately, I had to remove a few references to "EmojiParser", so I cannot guarantee how well emojis will work; I never use them so I was not worried. If you report bugs, I can try to fix them, but I cannot guarantee it. As usual, logcats will be the best method.
As usual, I cannot be held responsible if your device bricks or you make a nuclear weapon using this keyboard. Make a nandroid, flash, and probably wipe the dalvik cache to be safe.
Let me also reiterate, I am not the original developer, @enewman17 is. He's been a great help to our community and graciously agreed to let me put this up. I simply modded his keyboard.
If you can improve it, by all means. If you can host it elsewhere, by all means. (It's hosted on my personal Dropbox, so I cannot guarantee uptime.)
FLASHABLE DOWNLOAD: HERE
md5: 289ad7707b9a4fc76ec357e3ceba34f7
Click to expand...
Click to collapse
Any way u can make this keyboard in light grey or white???
Joehen873 said:
Any way u can make this keyboard in light grey or white???
Click to expand...
Click to collapse
I'm not a graphic designer. I do have the images available. If you or someone would like to modify them, I can make them available as a download, and can repack the keyboard with the new design.
Friend i could not put in my rom based stock 4.4.2.....you will know why
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
moyx said:
Friend i could not put in my rom based stock 4.4.2.....you will know why
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
No, I do not know why. Here is a fixed version.
Related
OK I was able to get a miui rom to work but it need a lot of fixes. this rom is from the AT&T Samsung Galaxy S II so it is basically the same. Yes It is flashable
FIX NEED:
-(Fix) All the capacitive buttons work(need to change button setting)
***Need to replace the usr file in the system folder***
-LED's Light Dont come on
***Need BLN Control-http://forum.xda-developers.com/showthread.php?t=823922
-No Sevice ( still set up as at&t(sim card) need to be cdma
-wifi need to be fix
-ext-sd mounting
-front camera
-Wifi tether
-Some headsets have volume issues
-Usb Disconnect After 20 sec and force reboot
-few other bugs..
Download Link
HTML:
http://www.multiupload.com/59NB4SE34F
Let's see if we can do it
Awsome, it all starts here!
I can fix wifi and other things but i dont have power right now soi cant work untill i do... also what kernel are you using for this? It has to have init.d support for themes to work and also the euro galaxy s2 version has the camera working last time i checked.
Sent from my SPH-D710 using XDA App
deano0714 said:
I can fix wifi and other things but i dont have power right now soi cant work untill i do... also what kernel are you using for this? It has to have init.d support for themes to work and also the euro galaxy s2 version has the camera working last time i checked.
Sent from my SPH-D710 using XDA App
Click to expand...
Click to collapse
I'd be curious to know what kernel as well. You try eri n apns for service? Wifi might be the same fix we've used for 2.3.5+ issues in the past as well since our kernel is technically built for 2.3.4.
barnacles10 said:
I'd be curious to know what kernel as well. You try eri n apns for service?
Click to expand...
Click to collapse
Im pretty sure data wont work ever without an aosp kernel... codeworkx has one for us on his gihub but every time i try to compile i get errors... it hasnt been tested tho because they dont have the phone yet from what i know.
Sent from my SPH-D710 using XDA App
deano0714 said:
Im pretty sure data wont work ever without an aosp kernel... codeworkx has one for us on his gihub but every time i try to compile i get errors... it hasnt been tested tho because they dont have the phone yet from what i know.
Sent from my SPH-D710 using XDA App
Click to expand...
Click to collapse
Interesting. I'll have to check that out as well. Thanks
nice. looking foward the see how this progresses
barnacles10 said:
Interesting. I'll have to check that out as well. Thanks
Click to expand...
Click to collapse
Thats what naerock(stiffspliff) said on the miui.us irc so i would assume he's right.
Sent from my SPH-D710 using XDA App
maybe someone can contact lithid-cm. last time i checked he was working on the aosp kernel, but it's been a while since we heard anything....
deano0714 said:
Thats what naerock(stiffspliff) said on the miui.us irc so i would assume he's right.
Sent from my SPH-D710 using XDA App
Click to expand...
Click to collapse
cool. i didnt realize naerok is stiffspliff.
Oh man, I loved MIUI when I had it on my NS4G. I hope to see real progress on it soon!
barnacles10 said:
I'd be curious to know what kernel as well. You try eri n apns for service? Wifi might be the same fix we've used for 2.3.5+ issues in the past as well since our kernel is technically built for 2.3.4.
Click to expand...
Click to collapse
hey barnacles,
if you grab the 'official' rom from miui.com or even the int'l sgs2 miui port from xda, all you need to do is swap the zimage with one of the epic 4g touch's (like LoStKernel) and it will boot up and function (maybe what the OP of this thread did, didn't download to see). Data and wifi were no go. If I remember, the cameras were working though unlike what this OP says. I've been working on this here and there but I definitely dont have as much free time as I'd like as I'm getting ready to move to the other side of the earth.
I'll be more than happy to answer questions and/or help development going as soon as I can put some time aside to work on this.
naerok said:
hey barnacles,
if you grab the 'official' rom from miui.com or even the int'l sgs2 miui port from xda, all you need to do is swap the zimage with one of the epic 4g touch's (like LoStKernel) and it will boot up and function (maybe what the OP of this thread did, didn't download to see). Data and wifi were no go. If I remember, the cameras were working though unlike what this OP says. I've been working on this here and there but I definitely dont have as much free time as I'd like as I'm getting ready to move to the other side of the earth.
I'll be more than happy to answer questions and/or help development going as soon as I can put some time aside to work on this.
Click to expand...
Click to collapse
do we need an aosp kernel to get data to work? generally speaking...
This is exciting ... fingers crossed
sent from my Samsung GalaxyS 2!
naerok said:
hey barnacles,
if you grab the 'official' rom from miui.com or even the int'l sgs2 miui port from xda, all you need to do is swap the zimage with one of the epic 4g touch's (like LoStKernel) and it will boot up and function (maybe what the OP of this thread did, didn't download to see). Data and wifi were no go. If I remember, the cameras were working though unlike what this OP says. I've been working on this here and there but I definitely dont have as much free time as I'd like as I'm getting ready to move to the other side of the earth.
I'll be more than happy to answer questions and/or help development going as soon as I can put some time aside to work on this.
Click to expand...
Click to collapse
Great thanks man ill definitely take a look.
Sent from my SPH-D710 using XDA App
naerok said:
I've been working on this here and there but I definitely dont have as much free time as I'd like as I'm getting ready to move to the other side of the earth.
I'll be more than happy to answer questions and/or help development going as soon as I can put some time aside to work on this.
Click to expand...
Click to collapse
You know they don't sleep over there, so get crackin'. LOL
Sent from my SPH-D710 using xda premium
AvatarOfFrost said:
do we need an aosp kernel to get data to work? generally speaking...
Click to expand...
Click to collapse
Not only way but it would make things x times easier and simplier
Sent from my SPH-D710 using xda premium
Rtistique said:
OK I was able to get a miui rom to work but it need a lot of fixes. this rom is from the AT&T Samsung Galaxy S II so it is basically the same. Yes It is flashable....
Click to expand...
Click to collapse
I'm not a fan of the MIUI ROM(its to iPhone-ish IMHO) but I still wanted to say thank you for this post. Although I know it wasn't its purpose, it did point me to the SkyRocket's Development, and Themes & Apps Section, and man do they have some goodies over there, which I never would've found had it not been for this post, so thanks again!
so you essentially made small tweaks and got aosp based rom from sgs2 int to boot? if so, nice. I wonder if this works with CM7 as well.
Omggggg we need to get this rolling. I thought someone was already working on a port for MIUI? What is this for? Excited nonetheless lol.
Sent from my Galaxy S II.
In the Samsung Galaxy S3 Stock ROM NFC does not work when screen is off or locked. With this mod NFC also works when screen is locked or off.
There are two versions. The first just enables NFC, when screen is on, but it also worked when it is locked. Also with a PIN or Password-Lock everything is fine. But it disables NFC when the SGS3 is in standby and the screen is off.
The second version let NFC active all the time, even when the SGS3 is in standby and the screen is off.
Nothing else is changed in the behaviour of the NFC.
There are also two zips to go back to stock NFC, one is odexed and one deodexed. Use them only with the right firmware version (for example UVALEM).
All ZIPs have to be flashed with CWM. You should wipe Dalvik cache after flashing.
This mod works for at least for the firmware UVALEM and UVALG1.
Please give me feedback, because I do not own this device and I cannot test the Mod on it! I just ported my MOD for the international S3 to the sgh-T999.
Disclaimer: As always, I hereby absolve myself of responsibility for any damage you cause to your phone by flashing this. There is inherent risk in modding your device, and by flashing anything in this thread you are taking that risk into your own hands. If something goes wrong, I will try and help. You should always make a Nandroid Backup before flashing.
To ROM Devs: You are more than welcome to use this in your ROMs! Just shoot me a little bit of credit in your release post!
Thank you: Geniusdog254 for the idea and the infos in your thread.
Here ist the link to the thread for the international S3 version:
http://forum.xda-developers.com/showthread.php?t=1712024
Confirmed working with UVALG1. Thanks a bunch, mayhemer!
Can someone with a sgh-T999 please install Check Fus and post or send me the "Product Code" and "HIDSWVER" of your device. It will be much easier for me with this information to download the newest firmware and provide you all with this mod for every new firmware. Thanks!
mayhemer said:
Can someone with a sgh-T999 please install Check Fus and post or send me the "Product Code" and "HIDSWVER" of your device. It will be much easier for me with this information to download the newest firmware and provide you all with this mod for every new firmware. Thanks!
Click to expand...
Click to collapse
I will... I am running uvlh3.. What is HIDSWVER??
Sent from my SGH-T999 or GT-P3113 using xda premium
Thank you! I wanted something like this for my s3. I like the one that works when screen is of. Can you also make one. Than when you say hi galaxy or something for it to wakeup or unlock for commands.
ktetreault14 said:
I will... I am running uvlh3.. What is HIDSWVER??
Sent from my SGH-T999 or GT-P3113 using xda premium
Click to expand...
Click to collapse
It's a combination of the Product Code, PDA, Phone and CSC. If you provide me with this information that would be great!
[tapatalk]Vom S3 mit Tapatalk[/tapatalk]
mayhemer said:
Can someone with a sgh-T999 please install Check Fus and post or send me the "Product Code" and "HIDSWVER" of your device. It will be much easier for me with this information to download the newest firmware and provide you all with this mod for every new firmware. Thanks!
Click to expand...
Click to collapse
Will the attached info work?
Edit: I updated to the latest baseband (T99UVLI1)
Awesome mod, great job!
Awesome job!
Fyi It works with uvli2
Sent from my SGH-T999 using xda premium
Isn't this option available on the jb roms already? I saw something in there about NFC polling while screen off and on.
Sent from my SGH-T999 using xda premium
mod works fine on my T999 with Free GS3 RC6.
installed the google wallet hack shortly after now the functionality is working intermittently. havent really figured out the pattern yet.
if i disable/re enable NFC from the settings everything seems to work. but sometimes with screen off it will not pick up the tag.
has anybody else had issued with running the google wallet hack with this mod?
i would love to have both functionalities.
Anyone try this on JB?
SiNJiN76 said:
Anyone try this on JB?
Click to expand...
Click to collapse
I did and just got constant vibrating non stop so it doesnt work on jb bud
Sent from my SGH-T999 using Tapatalk 2
Is there any way someone could do this for JB 4.1.1 (UVDALJA)??? Would really appreciate it.
se1000 said:
Is there any way someone could do this for JB 4.1.1 (UVDALJA)??? Would really appreciate it.
Click to expand...
Click to collapse
+1 I would love to see this as well
Sent from my SGH-T999 using Tapatalk 2
se1000 said:
Is there any way someone could do this for JB 4.1.1 (UVDALJA)??? Would really appreciate it.
Click to expand...
Click to collapse
FYI, here's the nfc.apk for UVDALJA from a stock de-odexed ROM that needs to be modified.
http://forum.xda-developers.com/attachment.php?attachmentid=1520995&d=1354184984
se1000 said:
Is there any way someone could do this for JB 4.1.1 (UVDALJA)??? Would really appreciate it.
Click to expand...
Click to collapse
bump
Will this work on a UVLH2?
I'm running CM10.0 (4.1.2).
I did this for lk3, but it might work for you guys. http://forum.xda-developers.com/showpost.php?p=37058230&postcount=47
No go...
loserskater said:
I did this for lk3, but it might work for you guys. http://forum.xda-developers.com/showpost.php?p=37058230&postcount=47
Click to expand...
Click to collapse
I gave it a try and sadly it doesn't work. Thanks for the try.
This guide is going to show you how to port ROMs to our Sprint GS3!
Before we begin, please download the programs 7zip and Notepad++ as we will need them. And get a Stock JB ROM for our Device(Preferably DeOdexed)
So lets get started!!!
1) Download the ROM you want to port
2) Open it using 7zip
3) Replace the kernel/boot.img with ours
4) Go to /system/lib/modules. Delete everything and replace with ours
5) then go to /system/lib/hw. Delete and replace everything with ours
6) For the Hard keys and soft keys to work go to /system/usr/keychars and delete and replace then go to /system/usr/keylayout and delete and replace with ours
7) Now go to /system/etc and delete the following and replace with ours:
- vold.fstab
- /wifi
- /ppp
Congrats! You have ported your first ROM! But please do the devs, and myself a favor and don't spam the Development Subforum with ports!
At the risk of sounding stupid.... is it really this easy???... LOL
Sent from my Wicked Sensations in the 3rd Galaxy!!!
Gonna try soon with the SlimBean Rom for the Verizon Galaxy s3.
steven1pc said:
Gonna try soon with the SlimBean Rom for the Verizon Galaxy s3.
Click to expand...
Click to collapse
You might want to check this
http://forum.xda-developers.com/showthread.php?p=33925957
Sent from my SPH-L710 using Tapatalk 2
Interesting. Might have to try this out.
jayton said:
At the risk of sounding stupid.... is it really this easy???... LOL
Sent from my Wicked Sensations in the 3rd Galaxy!!!
Click to expand...
Click to collapse
I'm thinking the same thing. If so, somebody should start a single thread (idk which section) that houses all of these types of ports. This just sounds too simple to work though.
I believe that there is a program that allows you to link a rom to port with a rom from your device.. It processes it.. And spits out a supposed, ported rom. I don't remember where I read it. Maybe this is the manual method... But, I agree.. It sounds too easy
Sent from my Jelly Bombed SGS3
rimgarciag said:
You might want to check this
http://forum.xda-developers.com/showthread.php?p=33925957
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
That was close, thanks so much. I should start checking the Q&A section more.
A nice guide for the noobs, Thanks
jayton said:
At the risk of sounding stupid.... is it really this easy???... LOL
Sent from my Wicked Sensations in the 3rd Galaxy!!!
Click to expand...
Click to collapse
Yes, it's that easy. But porting,to me, is like the simplest form of creating a custom ROM. Next is theming and modding, then comes building from source.
Nonetheless, hopefully this motivates some people to get their hands dirty with some work
Sent from my SPH-L710 using xda premium
This is good for cm based roms or roms for same device but separate carriers (sprint, Verizon, etc.) But for most others it would take much more. Just have fun and don't go trying to port htc sense right away lol If you're lucky you won't have to edit framework or anything
Sent from my SPH-L710 using xda premium
If we did this would we be able to you the mods/morphs that the ROM comes with? This sounds cool and all but Sprint I believe and I could be wrong are the only one with JB Final others are leaks. Don't want to go down that road again.
mnhertz26 said:
I believe that there is a program that allows you to link a rom to port with a rom from your device.. It processes it.. And spits out a supposed, ported rom. I don't remember where I read it. Maybe this is the manual method... But, I agree.. It sounds too easy
Sent from my Jelly Bombed SGS3
Click to expand...
Click to collapse
It was on the homepage news a couple months back.
_____________________________________________________
Sent from my SPH-L710 running FreeGS3 v1.0.0
"Wake me... when you need me." -Master Chief John 117
www.xda-developers.com/android/port-any-us-galaxy-s-iii-rom-to-other-us-variants/
Bam!
_____________________________________________________
Sent from my SPH-L710 running FreeGS3 v1.0.0
"Wake me... when you need me." -Master Chief John 117
I did all of this just as you said, in attempting to port an AT&T gs3 rom to my Sprint gs3. It gave me an error when I tried to flash it in CWM. I think it was error code 6? Any idea what I did wrong?
bmxchampga said:
I did all of this just as you said, in attempting to port an AT&T gs3 rom to my Sprint gs3. It gave me an error when I tried to flash it in CWM. I think it was error code 6? Any idea what I did wrong?
Click to expand...
Click to collapse
Try the link above.
_____________________________________________________
Sent from my SPH-L710 running FreeGS3 v1.0.0
"Wake me... when you need me." -Master Chief John 117
Ceelos09 said:
Yes, it's that easy. But porting,to me, is like the simplest form of creating a custom ROM. Next is theming and modding, then comes building from source.
Nonetheless, hopefully this motivates some people to get their hands dirty with some work
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
I tried porting the gnote 2 sprint rom to my gs3 but I keep getting a status 1 error in cwm. I guess its not that easy. But I did notice that there wasnt a modules folder in the gnote 2 rom that I downloaded but I still added it in there. Any thoughts??
ghostzyden said:
This is good for cm based roms or roms for same device but separate carriers (sprint, Verizon, etc.) But for most others it would take much more. Just have fun and don't go trying to port htc sense right away lol If you're lucky you won't have to edit framework or anything
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
wramos93 said:
I tried porting the gnote 2 sprint rom to my gs3 but I keep getting a status 1 error in cwm. I guess its not that easy. But I did notice that there wasnt a modules folder in the gnote 2 rom that I downloaded but I still added it in there. Any thoughts??
Click to expand...
Click to collapse
I guess the OP forgot to mention this would only work with ROMs similar to our phones, for example, other GS3 variants. The Note 2 has an Exynos chip, not a snapdragon S4 like ours, so porting will require a bit more effort than what the OP stated.
Sent from my SPH-L710 using xda premium
This is where i started or, i ported a rom from the tmo s3. It may seem difficult at first but trust me when you're done you'll think its a cakewalk
Sent from my Transformer TF101 using XDA Premium HD app
I wanna port a rom of another device to my phone, the main hardware is similar except that, that phone has a wvga resolution and mine has a hvga. Will this method still work?
Sent from my A7+
I figured I would start this thread so that we can move all the non-development talk out of the development section. I hope people will use it so that when something that pertains to development is talked about it will be easier to find. We can discuss what kernels gives best battery life, which ones work and which one break things. We can post about our favorite apps, widgets, wallpapers, or how the weather is outside. Maybe someone will get help on an issue they are having. We can discuss anything within the guidelines of XDA, lets just try to help keep Jovy's thread clean.
I'll start, has anyone had an issue when coming out of sleep the screen is dim and you have to go into brightness and tap it to make it work? I think maybe I set my clock frequency to low or maybe I should be using a different governor. Another issue that bugs me is when I have ripple effect set and use a black background for my lockscreen the borders of the screen look slightly grey. I have read posts about this and by turning off ripple effect the color is like it should be. I like the ripple effect and I like black backgrounds, does anyone know about a fix for this, or does anyone notice this issue on their phone.
Here's the link to the Darthstalker ROM if you read this post and want to check out the actual ROM: http://forum.xda-developers.com/showthread.php?t=2014442
I am not the developer of this ROM, all credit for this great ROM goes to jovy23 and those he's listed in his OP.
~ Todd
Sent from my AT100 using xda premium
Good idea for a thread about the greatest rom! Here is a quick mod for all those interested, here is the stock boot animation and sound that work great!
http://forum.xda-developers.com/showthread.php?t=1706856
Sent from my SGH-T999 using Tapatalk 2
Thank you for this :victory:
tp2215 said:
Good idea for a thread about the greatest rom! Here is a quick mod for all those interested, here is the stock boot animation and sound that work great!
http://forum.xda-developers.com/showthread.php?t=1706856
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
This is a good example of what this thread is for. Thanks for posting.
Sent from my AT100 using xda premium
So to move my question to this thread. If I nand will it flash back my original kernel. Trying to remove kt747 and go back to stock kernel that came with this Rom.
Sent from my SGH-T999 using xda app-developers app
JohnnyNyQuil said:
So to move my question to this thread. If I nand will it flash back my original kernel. Trying to remove kt747 and go back to stock kernel that came with this Rom.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Your nand restore should bring you back to whichever kernel was active during the backup
Sent from my SGH-T999 using xda premium
Awesome! Wasn't sure.
Sent from my SGH-T999 using xda app-developers app
edit28 said:
Your nand restore should bring you back to whichever kernel was active during the backup
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I flash quite a few kernels, always making a backup prior so I can always restore. When restoring I always wipe like I'm installing a new ROM. Just to make sure nothing gets left behind.
Sent from my AT100 using xda premium
tmjohnsonfse said:
I flash quite a few kernels, always making a backup prior so I can always restore. When restoring I always wipe like I'm installing a new ROM. Just to make sure nothing gets left behind.
Sent from my AT100 using xda premium
Click to expand...
Click to collapse
Same here! I find 99.9% of ROM-related issues for us flashaholics stem from not performing a full wipe prior to a flash. I've been fully stable on every DaRTHSTALKER update, with LOTS of varying kernel testing, by using this method. Full data + cache + Dalvik wipe then flash than another cache/dalvik wipe before the boot is always a good strategy!
Sent from my SGH-T999 using xda premium
I always make backups for any change I flash too but the last phone I rommed was my g1. The vibrant was too much of a pain and there wasn't any good roms with Wi-Fi calling. I know these things are a different beast so I just wanted to make sure. Btw doesn't nand do all of the wiping process for you?
Sent from my SGH-T999 using xda app-developers app
JohnnyNyQuil said:
I always make backups for any change I flash too but the last phone I rommed was my g1. The vibrant was too much of a pain and there wasn't any good roms with Wi-Fi calling. I know these things are a different beast so I just wanted to make sure. Btw doesn't nand do all of the wiping process for you?
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I believe it does, but it only takes a few seconds to be absolutely sure it's done correctly. I'm a creature of habit.
Sent from my AT100 using xda premium
Much better. I guess I didn't even try the Rom tweaks on this one in the first place. Gonna see tomorrow how much better it will be. On another note, has anyone successfully connected to allshare play with another gs3? My girlfriend got hers (completely stock 4.1.1 w/no root) and everything else interacts except for that. Would like to group cast with her and I've followed the videos online to do it but our phones don't show up in each other's network, connected to WiFi of course.
Sent from my SGH-T999 using xda app-developers app
tmjohnsonfse said:
I figured I would start this thread...
Click to expand...
Click to collapse
Thank you for this thread, this is an excellent idea!
I've been a fan of this ROM since the very day the version 9 was uploaded. I got my SGS3 late December (this is my first android device), tried a few ROMs and stopped on this one. (BTW: a suggestion to put a link to the DARTHSTALKER S3 ROM thread http://forum.xda-developers.com/showthread.php?t=2014442 on OP so everyone new to this knows what it is all about).
This being my first post on the entire forum I was not allowed to ask questions on the original ROM's threads (and there are at least two I am following).
Now, if you don't mind a newbie question, here it is:
I am a T-mo subscriber using an unlocked AT&T phone. Currently I am on DARTHSTALKER v9 port for AT&T (here's the thread: http://forum.xda-developers.com/showthread.php?t=2087164 ). As the most of you I am eagerly awaiting version X1 of the DaRTHSTALKER, but my question is: can I just flash the T-mobile version or should I wait for when an AT&T PORT is available?
Thnks.
Pr0phess0r said:
Thank you for this thread, this is an excellent idea!
I've been a fan of this ROM since the very day the version 9 was uploaded. I got my SGS3 late December (this is my first android device), tried a few ROMs and stopped on this one. (BTW: a suggestion to put a link to the DARTHSTALKER S3 ROM thread http://forum.xda-developers.com/showthread.php?t=2014442 on OP so everyone new to this knows what it is all about).
This being my first post on the entire forum I was not allowed to ask questions on the original ROM's threads (and there are at least two I am following).
Now, if you don't mind a newbie question, here it is:
I am a T-mo subscriber using an unlocked AT&T phone. Currently I am on DARTHSTALKER v9 port for AT&T (here's the thread: http://forum.xda-developers.com/showthread.php?t=2087164 ). As the most of you I am eagerly awaiting version X1 of the DaRTHSTALKER, but my question is: can I just flash the T-mobile version or should I wait for when an AT&T PORT is available?
Thnks.
Click to expand...
Click to collapse
I would pm Jovy as he would know best, but maybe someone may be able to answer the question for you. I am new to phones also and the S3 is my first smart phone. I too have tried most of the roms, but keep coming back to this one. I do know that most at&t kernels are compatible, I would want to be 100% sure of ROM compatibility before flashing, might end up in a bad way. Thanks for the suggestion about seeing if Jovy would put the link in his OP.
Sent from my AT100 using xda premium
I had something happen last night that I've never had happen before and maybe sometime can tell me what it was. I was restoring back after messing with a few mods that didn't work and when my phone booted up in the lower left corner it said "Safe Mode". I went back into recovery and wiped cache and dalvik cache, fixed permissions, and then rebooted and safe mode was gone. What is safe mode?
Thanks,
Todd
Edit: Should have used Google first. Safe mode is similar to computer safe mode. It only loads base os to allow for removal of files. Still don't understand why it happened, but atleast I know it wasn't something bad.
Sent from my AT100 using xda premium
Pr0phess0r said:
Thank you for this thread, this is an excellent idea!
I've been a fan of this ROM since the very day the version 9 was uploaded. I got my SGS3 late December (this is my first android device), tried a few ROMs and stopped on this one. (BTW: a suggestion to put a link to the DARTHSTALKER S3 ROM thread http://forum.xda-developers.com/showthread.php?t=2014442 on OP so everyone new to this knows what it is all about).
This being my first post on the entire forum I was not allowed to ask questions on the original ROM's threads (and there are at least two I am following).
Now, if you don't mind a newbie question, here it is:
I am a T-mo subscriber using an unlocked AT&T phone. Currently I am on DARTHSTALKER v9 port for AT&T (here's the thread: http://forum.xda-developers.com/showthread.php?t=2087164 ). As the most of you I am eagerly awaiting version X1 of the DaRTHSTALKER, but my question is: can I just flash the T-mobile version or should I wait for when an AT&T PORT is available?
Thnks.
Click to expand...
Click to collapse
tmjohnsonfse said:
I would pm Jovy as he would know best, but maybe someone may be able to answer the question for you. I am new to phones also and the S3 is my first smart phone. I too have tried most of the roms, but keep coming back to this one. I do know that most at&t kernels are compatible, I would want to be 100% sure of ROM compatibility before flashing, might end up in a bad way. Thanks for the suggestion about seeing if Jovy would put the link in his OP.
Sent from my AT100 using xda premium
Click to expand...
Click to collapse
I WOULD NOT DO THAT! Although I cannot answer the question directly, every carrier has modified there own Galaxy S3. They are all completely different. I know that if you flash a Universal galaxy S3 rom onto a T-Mobile device, it will completely hard brick it due to a change in the partition structure. If you have an At&t device, I would still stick to the Galaxy s3 at&t roms even though T-mobile is your carrier.
tp2215 said:
I WOULD NOT DO THAT! Although I cannot answer the question directly, every carrier has modified there own Galaxy S3. They are all completely different. I know that if you flash a Universal galaxy S3 rom onto a T-Mobile device, it will completely hard brick it due to a change in the partition structure. If you have an At&t device, I would still stick to the Galaxy s3 at&t roms even though T-mobile is your carrier.
Click to expand...
Click to collapse
+1. Unlocking your phone only allows it access to a different carriers sim card. It does not change the base of the phone itself. I have a Tmobile SG3 that's unlocked for my travels but any ROM I flash must be a tmo based ROM. In your case stick with the ATT ROMs so you don't end up with a brick, and enjoy this great rom
My s3 is stalking your s3....
Does anyone have a flashable (zip) stock kernel?
I have looked and looked with no luck, I mean I can always just re flash the rom, but wanted to explore other alternatives first.
Thanks for creating this thread btw.
Sent from my SGH-T999 using xda premium
Hey guys been using this ROM for awile. I recently flashed a 4.2 ROM and know my GPS won't lock on I had made a back up before flashing ROM and reverted back to backup after I decided to switch back to this rom. Any suggestions on how to fix?
Sent from my SGH-T999 using Tapatalk 2
I have noticed a while ago when I receive text notification or miss calls, when i slide on them it takes about 10 second to open. I have reflashed this ROM several times n others just to see what's up but the problem only occurs with version x...anyone else experience this? just my phone?
Sent from my SGH-T999 using xda premium
Deodexed/Odexed OTA 1.10.605.8 - build #
Deodexded
Link
Mirror
MD5:
76709259EA9E2C8C9289CF115989C638
Odexed
http://android-alliance.com/andybones/ccount/click.php?id=15
MD5:
504CB25D74DE5964EE60A0C7745E749A
Credits:
Indirect - ROM base
Hawknest - Full credit getting the ROM to boot, all credit to hawk, and indirect for base!
If you found this thread useful, Please hit the "thanks" button!
Saved.
Saved1.
VZW One off to a good start. Nice.
*Reserved
Sent from my SCH-I605 using Xparent Skyblue Tapatalk 2
I personally haven't flashed this ROM yet. I deodexed the files then, uploaded over night and posted the link today.
(not saying it won't work, all I did was deodex the apps and framework files and replace in his .zip.)
So it will be like stock, but deodexed and can do MODs much easier.
debloat, smali MODs the works, I'll be posting add-ons as I get to the MODs
Gotta get my thinking cap on, been on Samsung for the SG3/SG4, time to get back into the HTC Mode.
If anyone has flashed this can you just give confirmation please?
I am about to flash so I will update if someone doesn't chime in first.
I tried flashing and got some sort of error, need to check into it.
Flashed the odex ROM, got same error, it still works just perss reboot, and don't install the root fix, and ROM will boot, or did for me anyway.
looking into the perm issue now
Praying for a stock ROM minus blinkfeed.
andybones said:
I personally haven't flashed this ROM yet. I deodexed the files then, uploaded over night and posted the link today.
(not saying it won't work, all I did was deodex the apps and framework files and replace in his .zip.)
So it will be like stock, but deodexed and can do MODs much easier.
debloat, smali MODs the works, I'll be posting add-ons as I get to the MODs
Gotta get my thinking cap on, been on Samsung for the SG3/SG4, time to get back into the HTC Mode.
If anyone has flashed this can you just give confirmation please?
I am about to flash so I will update if someone doesn't chime in first.
I tried flashing and got some sort of error, need to check into it.
Flashed the odex ROM, got same error, it still works just perss reboot, and don't install the root fix, and ROM will boot, or did for me anyway.
looking into the perm issue now
Click to expand...
Click to collapse
Did you get a vzw htc one andy?
sbreen94 said:
Did you get a vzw htc one andy?
Click to expand...
Click to collapse
I did my friend.
Thank you!!
azndan2 said:
Thank you!!
Click to expand...
Click to collapse
sorry the link had to be pulled, the ROM I based this off of I thought worked, I never tested it and getting same error.
Working on fix now, hopefully will get it
or can get some help
andybones said:
sorry the link had to be pulled, the ROM I based this off of I thought worked, I never tested it and getting same error.
Working on fix now, hopefully will get it
or can get some help
Click to expand...
Click to collapse
What do you need done?
bjaxon said:
What do you need done?
Click to expand...
Click to collapse
phone to boot, I posted the error in indirects thread, i used his base and just deodexed the ROM, his ROM gives same error.
any help appreciated.
andybones said:
I did my friend.
Click to expand...
Click to collapse
That's cool man! You still keeping your Samsung devices?
Sent from my SCH-I545 using xda premium
sbreen94 said:
That's cool man! You still keeping your Samsung devices?
Sent from my SCH-I545 using xda premium
Click to expand...
Click to collapse
Thanks brother! you plan on getting one??
yea I am,def the s3 anyway, if s4 doesn't ever get unlocked, I might dump if to get some cash back.
andybones said:
Thanks brother! you plan on getting one??
yea I am,def the s3 anyway, if s4 doesn't ever get unlocked, I might dump if to get some cash back.
Click to expand...
Click to collapse
Yeah lol probably not probably gonna wait for the note 3 but we'll see what happens
Sent from my SCH-I545 using xda premium
sbreen94 said:
Yeah lol probably not probably gonna wait for the note 3 but we'll see what happens
Sent from my SCH-I545 using xda premium
Click to expand...
Click to collapse
yea I'll be getting that too, may dump sg4 for it, if no unlocked boot loader by then, if it gets cracked ill keep it and buy the note3 on contract like did with htc one, have a bunch of upgrades.
got the HTC one for free, after it was said and done I actually made $50 but that's not a story for the public.
and my line is ready for upgrade.
my old man got the moto max today, I'll see what he thinks coming from SG4, he doesn't root though, so it's pure stock against stock.
andybones said:
yea I'll be getting that too, may dump sg4 for it, if no unlocked boot loader by then, if it gets cracked ill keep it and buy the note3 on contract like did with htc one, have a bunch of upgrades.
got the HTC one for free, after it was said and done I actually made $50 but that's not a story for the public.
and my line is ready for upgrade.
my old man got the moto max today, I'll see what he thinks coming from SG4, he doesn't root though, so it's pure stock against stock.
Click to expand...
Click to collapse
Yeah definitely nice. The maxx has that huge battery but there's not much else to offer imo....
Sent from my SCH-I545 using xda premium
sbreen94 said:
Yeah definitely nice. The maxx has that huge battery but there's not much else to offer imo....
Sent from my SCH-I545 using xda premium
Click to expand...
Click to collapse
I completely agree, no idea how he will like it, he is odd.
He LOVED the iPhone, wouldn't even listen to me, eventually I talked him into the Samsung Galaxy 3, which he loved then the SG4 which he kinda liked.. which is why he bought the maxx.
andybones said:
I completely agree, no idea how he will like it, he is odd.
He LOVED the iPhone, wouldn't even listen to me, eventually I talked him into the Samsung Galaxy 3, which he loved then the SG4 which he kinda liked.. which is why he bought the maxx.
Click to expand...
Click to collapse
Lol a little bit b of a difference in the user experience but hopefully he'll like it
Sent from my SCH-I545 using xda premium