[Q] Galaxy Grand - struct in logo after upgrading to Cosmic ROM - Galaxy Grand Duos i9082 Q&A, Help & Troubleshootin

Hi,
I have upgraded my grand to Cosmic ROM using below link.
http://forum.xda-developers.com/showthread.php?t=2627818 and http://www.yogeshsarkar.com/blog/2014/04/01/how-to-install-custom-rom-on-galaxy-grand-duos/
I was having official 4.2.2 before upgrade and upgraded to Consmic ROM v4.3
after successfull upgrade, i have restarted my phone. It is struct in logo screen only.
Please help to solve this issue.
Thanks

rsvali said:
Hi,
I have upgraded my grand to Cosmic ROM using below link.
http://forum.xda-developers.com/showthread.php?t=2627818 and http://www.yogeshsarkar.com/blog/2014/04/01/how-to-install-custom-rom-on-galaxy-grand-duos/
I was having official 4.2.2 before upgrade and upgraded to Consmic ROM v4.3
after successfull upgrade, i have restarted my phone. It is struct in logo screen only.
Please help to solve this issue.
Thanks
Click to expand...
Click to collapse
U should only follow the instructions given in the op and not on a tech blog
U can try this
Go to recovery
Wipe data
Flash rom zip
Reboot

doctor_droid said:
U should only follow the instructions given in the op and not on a tech blog
U can try this
Go to recovery
Wipe data
Flash rom zip
Reboot
Click to expand...
Click to collapse
Thanks for the reply.
Now i tried to recover using Odin3 v3.09, i got below logs.
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
It is showing RESET! instead of PASS.
what is the difference between them, how can i get PASS.
Thanks in advance.

rsvali said:
Thanks for the reply.
Now i tried to recover using Odin3 v3.09, i got below logs.
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
It is showing RESET! instead of PASS.
what is the difference between them, how can i get PASS.
Thanks in advance.
Click to expand...
Click to collapse
Its okay if the procedure was completed...reset will change to pass by itself... After some time
If u experiencing a bootloop still
Boot into stock recovery
Wipe data(this will delete everything on internal memory including pics videos ... Etc
One workaround to save data is
Flash a custom recovery after odin flash..
Go into custom recovery
Wipe data from there.. Bingo

doctor_droid said:
Its okay if the procedure was completed...reset will change to pass by itself... After some time
If u experiencing a bootloop still
Boot into stock recovery
Wipe data(this will delete everything on internal memory including pics videos ... Etc
One workaround to save data is
Flash a custom recovery after odin flash..
Go into custom recovery
Wipe data from there.. Bingo
Click to expand...
Click to collapse
Should i need to wipe the data before installing ROM from ZIP or after installing from ZIP or both. Please let me know.
Sorry for too many questions.
Can you please share any details step by step documentation to do this. thanks for your help.

rsvali said:
Should i need to wipe the data before installing ROM from ZIP or after installing from ZIP or both. Please let me know.
Sorry for too many questions.
Can you please share any details step by step documentation to do this. thanks for your help.
Click to expand...
Click to collapse
Hello...
Its better to wipe data before and after ROM installation that's the procedure i follow and till now No bootloops i had..
and with this Follow the instruction given in ROM OP too for successful Installation of ROM...

jackeagle said:
Hello...
Its better to wipe data before and after ROM installation that's the procedure i follow and till now No bootloops i had..
and with this Follow the instruction given in ROM OP too for successful Installation of ROM...
Click to expand...
Click to collapse
I have followed same proceudre, but still my phone is struck in logo only.
the only difference is, odin showed RESET and i have unplugged the device and started device in factory mode ( using power+home+volume up). After few minutes of unplug odin shows PASS.
I have wipe the data and cache before and after the ROM installation.
Please let me know if any mistake is there, and do let me know how to make my device work.
Thanks in advance.

rsvali said:
I have followed same proceudre, but still my phone is struck in logo only.
the only difference is, odin showed RESET and i have unplugged the device and started device in factory mode ( using power+home+volume up). After few minutes of unplug odin shows PASS.
I have wipe the data and cache before and after the ROM installation.
Please let me know if any mistake is there, and do let me know how to make my device work.
Thanks in advance.
Click to expand...
Click to collapse
Which Recovery you are using now?? CWM or Philz? Which ROM you installed??

jackeagle said:
Which Recovery you are using now?? CWM or Philz? Which ROM you installed??
Click to expand...
Click to collapse
I am using ClockworkMod recovery with SELinux support and Cosmic CM 11 ROM for Galaxy Grand Duos.

rsvali said:
I am using ClockworkMod recovery with SELinux support and Cosmic CM 11 ROM for Galaxy Grand Duos.
Click to expand...
Click to collapse
If you are using Cosmic CM then you have to flash Evolution kernel 1.7.6 son after you flash Cosmic ROM otherwise it will cause bootloop...
Hope this helps you..

jackeagle said:
If you are using Cosmic CM then you have to flash Evolution kernel 1.7.6 son after you flash Cosmic ROM otherwise it will cause bootloop...
Hope this helps you..
Click to expand...
Click to collapse
How to flash Evolution kernel 1.7.6, can you please share link/video/thread with step by step information. that would be help full.

rsvali said:
How to flash Evolution kernel 1.7.6, can you please share link/video/thread with step by step information. that would be help full.
Click to expand...
Click to collapse
You can see here http://forum.xda-developers.com/showthread.php?t=2627818
download Evolution Kernel 1.7.6 and after flashing ROM flash this Kernal like you flash ROM and then wipe cache,Dalvic,Wipe Data and good to go... Remember Always Follow has given in OP each and every step that too while flashing kernel and if you are not familiar with F2fs don't install it just flash ROM and KERNEL... and gapps too..

jackeagle said:
You can see here http://forum.xda-developers.com/showthread.php?t=2627818
download Evolution Kernel 1.7.6 and after flashing ROM flash this Kernal like you flash ROM and then wipe cache,Dalvic,Wipe Data and good to go... Remember Always Follow has given in OP each and every step that too while flashing kernel and if you are not familiar with F2fs don't install it just flash ROM and KERNEL... and gapps too..
Click to expand...
Click to collapse
Thanks it worked..

rsvali said:
Thanks it worked..
Click to expand...
Click to collapse
Congrats... Enjoy...:good::good:

Related

[RECOVERY] Odin Flashable ClockworkMod Recovery Images

I am a MadTeam developer and I recently acquired this phone. I noticed that there weren't any Odin flashable ClockworkMod recoveries of the latest versions for this device, so I made my own and decided to share with you guys. This possibly may be helpful for new comers and also for people who may want to update their recoveries to touch recoveries without having to purchase the pro version of ROM Manager. I'll be sure to keep this thread up-to-date.
These are based off of the official ClockworkMod recovery images available at http://www.clockworkmod.com with no changes whatsoever.
ClockworkMod Recovery v6.0.1.5: http://www.mediafire.com/?wjm90gwjcvg4ccc
ClockworkMod Touch Recovery v6.0.1.5: http://www.mediafire.com/?bpr3dd11747zgcc
Flashing Instructions:
1. Open up Odin3 v1.85. Make sure only the "Auto Reboot" and "F. Reset Time" boxes are checked and nothing else.
2. Connect your phone to the computer in Download Mode. Odin should now detect your phone.
3. Select the PDA button and navigate to the desired recovery tar.
4. Press the "Start" button. It will now flash the updated recovery to your device. Your device will reboot upon completion.
Reserved.
Thanks, now when we say, Odin flash CWM, we can speak of flashing the latest one instead of the old 5.xx!
Thank you for doing this. I'm sure it will help some people out.
F. Reset Time
What does "F. Reset Time" do and is this required?
racer321 said:
What does "F. Reset Time" do and is this required?
Click to expand...
Click to collapse
Honestly not sure if needed but I've always had it checked and nothing bad had happened.
I stall out on flashing recovery image. Here's what I get. I'm using a tar where I manually swapped in the recovery image on my own.
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
Click to expand...
Click to collapse
And it just stalls. The screen of the phone appears as if nothing happened. I don't see the progress bar or anything.
Odin shows the first blue bar of the progress bar but it never goes beyond that.
Any help?
EDIT - it worked fine using one of the tars from this thread. So what am I doing wrong when substituting a recovery image on my own?
Hey thanks mate.
I tried flashing the latest TCWM via Rom Manager, and I guess the download got interrupted and it had a bad flash.
Ah well, not a big deal, but you saved me from having to go back to stock to unbrick it.
thanks for this its awesome to be updated and when i need it i will report lol
Is anyone making these for twrp?
Phateless said:
Is anyone making these for twrp?
Click to expand...
Click to collapse
TWRP already releases Odin flashables on the website.
http://techerrata.com/browse/twrp2/hercules
meekrawb said:
TWRP already releases Odin flashables on the website.
http://techerrata.com/browse/twrp2/hercules
Click to expand...
Click to collapse
I had no idea, but that's pretty awesome.

Note 2 N7100 sleep of death

Hi all , today I've flash the stock rom for my Note 2 , but after that , my Note 2 cannot registered on the network and the IMEI was change to 0049xxx...
Then I've flash the new Modem here as this guy told http://forum.xda-developers.com/showpost.php?p=43037352&postcount=134.
But in Odin , I choose the file in PDA tab instead of Phone Tab and the modem can still flash ok. After that ,when reboot my phone , it cannot turn off every time the screen is off. And I can't make my phone become normal , i've reflash the stock rom many times , but that didn't help.
Someone please help me?
And I cannot connect to KIES anymore ...
heorung said:
And I cannot connect to KIES anymore ...
Click to expand...
Click to collapse
hey. try flashing the rom again using odin and set it as PDA..
after that, lei it boot.. if you still not getting any signal, or lost ypur imei, flash the modem and set it as PHONE
Hope it works
among4239bulan said:
hey. try flashing the rom again using odin and set it as PDA..
after that, lei it boot.. if you still not getting any signal, or lost ypur imei, flash the modem and set it as PHONE
Hope it works
Click to expand...
Click to collapse
Hi , thanks for the reply , did you mean flash the firmware file with the PHONE option tick?
heorung said:
Hi , thanks for the reply , but how to set pda or phone?
Click to expand...
Click to collapse
see image below..
the red circle is PDA, insert your ROM file here.
the pink circle is PHONE, insert your MODEM file here.
also wipe cache, data and dalvik cache in cwm.
among4239bulan said:
see image below..
the red circle is PDA, insert your ROM file here.
the pink circle is PHONE, insert your MODEM file here.
also wipe cache, data and dalvik cache in cwm.
Click to expand...
Click to collapse
Hi among4239bulan , i already tried that but the phone still mess up , i've tried to flash the newwest stock rom and the network has return back to normal , but the phone cannot turn on whenever the screen is off
Don't know if put the modem.tar.md5 in the "PDA" slot is destroyed anything ?
I download the rescue firmware but Odin cannot flash it , it's always stuck at
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
heorung said:
Hi among4239bulan , i already tried that but the phone still mess up , i've tried to flash the newwest stock rom and the network has return back to normal , but the phone cannot turn on whenever the screen is off
Don't know if put the modem.tar.md5 in the "PDA" slot is destroyed anything ?
I download the rescue firmware but Odin cannot flash it , it's always stuck at
Click to expand...
Click to collapse
it may be related to the wrongly placed modem.tar earlier.. just try flashing another rom,custom one just to see whether the problem still persist.. or have you tried the pre-rooted stock rom that dr.ketan had provided?
Hi among4239bulan , i used the Mobile Odin to flash the rescue firmware , and seems that the problem was gone. Thanks for your help , I really appreciate that ^^
heorung said:
Hi among4239bulan , i used the Mobile Odin to flash the rescue firmware , and seems that the problem was gone. Thanks for your help , I really appreciate that ^^
Click to expand...
Click to collapse
no problem, glad that the problem is solved.

[Q] AOSP Rom Problem

I was on 4.1.2 stock firmware
I downloaded an aosp rom http://forum.xda-developers.com/showthread.php?t=2522959 , then i wanted to flash a stock-based rom 4.2
but it got me in a bootloop
my problem is that I cant change from an aosp rom to a stock one, I tried flashing 4.4.2 roms but bootloop again,but I think it is because my recovery is old
I want to change to a stock-based rom
second problem
every aosp rom I flashed was JB. None gave me mobile internet access (3g), I have the signal bar(triangle) empty but I can call and receive phone calls, but I cant use mobile network... I tried changing chips, and changing the place of the chips, same problem.
Hope someone helps
stevenson97 said:
I was on 4.1.2 stock firmware
I downloaded an aosp rom http://forum.xda-developers.com/showthread.php?t=2522959 , then i wanted to flash a stock-based rom 4.2
but it got me in a bootloop
my problem is that I cant change from an aosp rom to a stock one, I tried flashing 4.4.2 roms but bootloop again,but I think it is because my recovery is old
I want to change to a stock-based rom
second problem
every aosp rom I flashed was JB. None gave me mobile internet access (3g), I have the signal bar(triangle) empty but I can call and receive phone calls, but I cant use mobile network... I tried changing chips, and changing the place of the chips, same problem.
Hope someone helps
Click to expand...
Click to collapse
1. Backup your EFS..
2. Flash stock ROM from sammobiles using ODIN.
3. Root it. Flash latest recovery and take Nandroid backup of your stock ROM.
4. Now try flashing different ROMs according to your taste.
Trilochanaaya said:
1. Backup your EFS..
2. Flash stock ROM from sammobiles using ODIN.
3. Root it. Flash latest recovery and take Nandroid backup of your stock ROM.
4. Now try flashing different ROMs according to your taste.
Click to expand...
Click to collapse
Could you please support me with links for everything cause I'm kinda a newbie
stevenson97 said:
Could you please support me with links for everything cause I'm kinda a newbie
Click to expand...
Click to collapse
Yes. U r most welcome. Tell me what links u need, I shall provide.
Trilochanaaya said:
Yes. U r most welcome. Tell me what links u need, I shall provide.
Click to expand...
Click to collapse
I downloaded this firmware http://www.sammobile.com/firmwares/3/?download=30838 and flashed it as you said
odin showed that it succeeded
afterwards, i only got the first screen, it looked like whenever it tries to turn on, it restarts, I only got the samsung grand duos screen, nothing more
and I couldnt access to the recovery nor flash a recovery
in download mode, it shows :system status custom
!!!!!!!!!!!!!!!!!!!!!
! Current eMMC firm vission
! [ ]
!!!!!!!!!!!!!!!!!!!!!
what do you say to that?:crying:
stevenson97 said:
I downloaded this firmware http://www.sammobile.com/firmwares/3/?download=30838 and flashed it as you said
odin showed that it succeeded
afterwards, i only got the first screen, it looked like whenever it tries to turn on, it restarts, I only got the samsung grand duos screen, nothing more
and I couldnt access to the recovery nor flash a recovery
in download mode, it shows :system status custom
!!!!!!!!!!!!!!!!!!!!!
! Current eMMC firm vission
! [ ]
!!!!!!!!!!!!!!!!!!!!!
what do you say to that?:crying:
Click to expand...
Click to collapse
I hope u have followed the instructions of flashing stock ROM. Remove the battery and insert after 10-15 seconds. Now enter recovery mode & do factory reset. Now ur phone should bootup. Current eMMC version is a common message while entering stock recovery.
---------- Post added at 04:15 PM ---------- Previous post was at 04:13 PM ----------
PM me if u r having hangouts or whatsapp.
Now ur device is in soft bricked state. Be cautious and don't mess up further.
https://drive.google.com/uc?id=0B3qYFBKKL2hiVmRPanpVd2w3Vjg
Here is the link for ur country version 4.1.2. Good luck.
Trilochanaaya said:
https://drive.google.com/uc?id=0B3qYFBKKL2hiVmRPanpVd2w3Vjg
Here is the link for ur country version 4.1.2. Good luck.
Click to expand...
Click to collapse
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9082XXAMC7_I9082OJVAMC1_I9082XXAMC4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)

A5 2017 recovery is not seandroid enforcing ....need a litte Help

..
Hi to all !
,,not sure if its related to a change of account password
Due to a problem I had to change my google account password , the phone disconnected from the account asked me for the new pass , inserted and all was ok
..this evening i had to restart the phone but it doesn't switch on anymore and i got a red message on top left
recovery is not seandroid enforcing
custom binary blocked by frp lock
Tried to reinstall TWRP by Odin but get this error :
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
..Have I to try to flash a Stock ROM on it?
or nay suggest ?
thank you !!
EDIT
forgot to mention
I have access only to Download Mode NO recovery Mode
Awwww... poor you! You found yourself in a level 3 bootloader... that means that you cannot flash unofficial binaries such as; twrp and other recoveries or so.
Try following this https://forum.xda-developers.com/sa...w-to/guide-root-install-twrp-samsung-t3747535
And everything is going to be alright!!!
But first things first flash the latest firmware of your phone and then follow the steps from the link! I did it myself and it's really awesome...
Andriano24 said:
Awwww... poor you! You found yourself in a level 3 bootloader... that means that you cannot flash unofficial binaries such as; twrp and other recoveries or so.
Try following this https://forum.xda-developers.com/sa...w-to/guide-root-install-twrp-samsung-t3747535
And everything is going to be alright!!!
But first things first flash the latest firmware of your phone and then follow the steps from the link! I did it myself and it's really awesome...
Click to expand...
Click to collapse
Thanks for your reply
that's what i done :
reinstalled Stock recovery by Odin
then installed latest Nougat Stock ROM by Odin
All OK !
I was in mistake forcing to install a MM Rom ( stock ) but wasn't right on what version had to install ( due to some missing information regarding Phone )
So now I'm ok ..obviously lost Root access ..but have OTA updates OK
Thank You again
..for the root again I'll have a look later
buio2005 said:
Thanks for your reply
that's what i done :
reinstalled Stock recovery by Odin
then installed latest Nougat Stock ROM by Odin
All OK !
I was in mistake forcing to install a MM Rom ( stock ) but wasn't right on what version had to install ( due to some missing information regarding Phone )
So now I'm ok ..obviously lost Root access ..but have OTA updates OK
Thank You again
..for the root again I'll have a look later
Click to expand...
Click to collapse
You just have to wait upto 6 days for the rmm thing to reset so you can flash again stuff. If you don't want to find yourself in a bootloop or have to wait again a week flash the thing in twrp on the post I send after 6 days (then you will have the ability go flash twrp again) notice you mustn'tlet your phone die or don't restart your phone by yourself. (Better see post for further information)
.
OK !
..to be honest I'm playing wit Nougat just to see differences from MM
Not sure to reinstall a Custom ROM till I'll found a very stable one
what I'll have to do surely will be Root access ..but not at the moment
buio2005 said:
.
OK !..to be honest I'm playing with Nougat just to see differences from MM
Click to expand...
Click to collapse
Sorry to tell you but... once you updated the bootloader you can't go back to MM... you can still flash the MM files expect the bl one in Odin but the performance will be awful
..
I dont want to go back to MM
I prefer to keep Nougat with root access in the future
Device seems OK now and restored all Apps as it was before plus some new from Nougat default

Samsung S9 No Signal Issue

I bought the phone locally, knowing of the issue. The seller claimed that it worked fine before, but started having this No Singal issue recently. The model of my motherboard is G960F, and right now the android version that's on my S9 is Android Pi; SM-G960U1. My IMEI is there. I am not getting to flash anything because of Qualcomm Secureboot. Any advice given would be appreciated, thanks in advance.
xcodydoe said:
I bought the phone locally, knowing of the issue. The seller claimed that it worked fine before, but started having this No Singal issue recently. The model of my motherboard is G960F, and right now the android version that's on my S9 is Android Pi; SM-G960U1. My IMEI is there. I am not getting to flash anything because of Qualcomm Secureboot. Any advice given would be appreciated, thanks in advance.
Click to expand...
Click to collapse
huh? you cant flash anything in Odin?
youdoofus said:
huh? you cant flash anything in Odin?
Click to expand...
Click to collapse
Nope Says "FAILED" and something about secureboot
xcodydoe said:
Nope Says "FAILED" and something about secureboot
Click to expand...
Click to collapse
did you do a factory reset from recovery with a google account still logged into the phone or something?
youdoofus said:
did you do a factory reset from recovery with a google account still logged into the phone or something?
Click to expand...
Click to collapse
Nope, no google account here
EDIT: I believe it has something to do with the latest security patch and bootloader
xcodydoe said:
Nope, no google account here
EDIT: I believe it has something to do with the latest security patch and bootloader
Click to expand...
Click to collapse
that doesnt make sense unless youre trying to flash firmware with a bootloader revision prior to the last one that was flashed on your phone. Get the most recent firmware for your specific country here. Use the regular CSC file so that it will completely factory reset your phone and that should fix your issue. Let me know what happens after you flash that. And download it with the Frija tool. Not sure if i mentioned that tool already as i cant see the prior responses when replying and ive mentioned it several times today already lol
youdoofus said:
that doesnt make sense unless youre trying to flash firmware with a bootloader revision prior to the last one that was flashed on your phone. Get the most recent firmware for your specific country here. Use the regular CSC file so that it will completely factory reset your phone and that should fix your issue. Let me know what happens after you flash that. And download it with the Frija tool. Not sure if i mentioned that tool already as i cant see the prior responses when replying and ive mentioned it several times today already lol
Click to expand...
Click to collapse
Thank you, I'll try that and let you know.
youdoofus said:
that doesnt make sense unless youre trying to flash firmware with a bootloader revision prior to the last one that was flashed on your phone. Get the most recent firmware for your specific country here. Use the regular CSC file so that it will completely factory reset your phone and that should fix your issue. Let me know what happens after you flash that. And download it with the Frija tool. Not sure if i mentioned that tool already as i cant see the prior responses when replying and ive mentioned it several times today already lol
Click to expand...
Click to collapse
I'm not getting to flash it with Odin. This is the error that I'm getting. http://prntscr.com/p0f5qa
Downloaded the firmware using Frija
youdoofus said:
that doesnt make sense unless youre trying to flash firmware with a bootloader revision prior to the last one that was flashed on your phone. Get the most recent firmware for your specific country here. Use the regular CSC file so that it will completely factory reset your phone and that should fix your issue. Let me know what happens after you flash that. And download it with the Frija tool. Not sure if i mentioned that tool already as i cant see the prior responses when replying and ive mentioned it several times today already lol
Click to expand...
Click to collapse
Tried exactly this and I'm getting this error http://prntscr.com/p2gu5t
<ID:0/009> Added!!
<ID:0/009> Odin engine v(ID:3.1301)..
<ID:0/009> File analysis..
<ID:0/009> skip file list for home binary
<ID:0/009> Home Binary Download
<ID:0/009> Total Binary size: 612 M
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> NAND Write Start!!
<ID:0/009> SingleDownload.
<ID:0/009> cache.img
<ID:0/009> Complete(Write) operation failed.
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
xcodydoe said:
Tried exactly this and I'm getting this error http://prntscr.com/p2gu5t
<ID:0/009> Added!!
<ID:0/009> Odin engine v(ID:3.1301)..
<ID:0/009> File analysis..
<ID:0/009> skip file list for home binary
<ID:0/009> Home Binary Download
<ID:0/009> Total Binary size: 612 M
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> NAND Write Start!!
<ID:0/009> SingleDownload.
<ID:0/009> cache.img
<ID:0/009> Complete(Write) operation failed.
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Have you ever used Odin successfully on this computer before?
youdoofus said:
Have you ever used Odin successfully on this computer before?
Click to expand...
Click to collapse
Yeah, when the phone's Android version was at 8
xcodydoe said:
Yeah, when the phone's Android version was at 8
Click to expand...
Click to collapse
then redownload the 4 files, get a new copy of Odin, use a different cable and finally try a different computer if the first 3 didnt work
youdoofus said:
then redownload the 4 files, get a new copy of Odin, use a different cable and finally try a different computer if the first 3 didnt work
Click to expand...
Click to collapse
Can you link the latest version of Odin?
HTML:
xcodydoe said:
Can you link the latest version of Odin?
Click to expand...
Click to collapse
https://odindownload.com/

Categories

Resources