[Q] Flashing CM9 not working - Samsung Epic 4G Touch

I'm attemping to follow this guide, http://wiki.cyanogenmod.org/w/Install_CM_for_d710, for installing cm9 on the e4gt but i'm unable to do so. I'm using ACS Recovery5 v1.0.0.0 as the recovery manager.
When I wipe data and factory reset i get no sort of confirmation that it has completed, i go on to wiping cache and dalvik cache and then get to the step of installing the cm9 zip and i get an error.
Code:
E:Error in /emmc/cm-9.1.0-galaxys2.zip
(Status 7)
Installation Aborted.
When i reboot the phone after this error, none of my user data is gone, its as if the factory reset did not occur at all.

6320
D3athrow said:
I'm attemping to follow this guide, (im new so had to delete this link), for installing cm9 on the e4gt but i'm unable to do so. I'm using ACS Recovery5 v1.0.0.0 as the recovery manager.
When I wipe data and factory reset i get no sort of confirmation that it has completed, i go on to wiping cache and dalvik cache and then get to the step of installing the cm9 zip and i get an error.
Code:
E:Error in /emmc/cm-9.1.0-galaxys2.zip
(Status 7)
Installation Aborted.
When i reboot the phone after this error, none of my user data is gone, its as if the factory reset did not occur at all.
Click to expand...
Click to collapse
To be completely honest, I have no idea what would cause this error. It shouldnt let you select anything else until the wipe is done. Ive been using the SXTP_Agat recovery (based on CWM) and its worked perfectly for over 20 wipes/flashes. I have it attached. It is a .tar file so just flash it thru odin and it should be there. Let me know if it doesnt work or you have any other issues.
Also, I found an unofficial port of Cyanogenmod 10.1 somewhere a while back. Ill try to find the link and ill update this post to include it.
Good luck!
--Edit-- Heres that link to cyanogenmod 10.1

Related

FULL_WIPE_1.5_EXT4_ zip - ERROR

I recently tried to flash JellyMIUI_3.1.11_v2 custom rom on my HTC Desire HD.
Install instructions suggest to install FULL_WIPE_1.5_EXT4_ zip from sd card.
When attempting to intall full wipe i get the following error:
-Model ID - HTC Ace
-Ok to proceed
Now preparing for a clean install of any EXT4 ROM
Please be patient
1st boot may take a few minutes
-Formatting Data
-Formatting System
E: Error in /sdcard/FULL_WIPE_1.5_EXT_.zip
(status 1)
Installation aborted
Does anyone know why I would be getting this error or how to fix?
Despite this error I am still able to install the JellyMIUI_3.1.11_v2 custom rom although GPS does not work (not sure if this related)
Rainbowserpant said:
I recently tried to flash JellyMIUI_3.1.11_v2 custom rom on my HTC Desire HD.
Install instructions suggest to install FULL_WIPE_1.5_EXT4_ zip from sd card.
When attempting to intall full wipe i get the following error:
-Model ID - HTC Ace
-Ok to proceed
Now preparing for a clean install of any EXT4 ROM
Please be patient
1st boot may take a few minutes
-Formatting Data
-Formatting System
E: Error in /sdcard/FULL_WIPE_1.5_EXT_.zip
(status 1)
Installation aborted
Does anyone know why I would be getting this error or how to fix?
Despite this error I am still able to install the JellyMIUI_3.1.11_v2 custom rom although GPS does not work (not sure if this related)
Click to expand...
Click to collapse
I does not even use that wipe script... just go to recovery and select "wipe everything except sdcard".. and then flash the rom.. works perfectly
GPS does not work: Check whether autorotation working or not
if it does not, flash the stock rom first before flashing jellymiui rom..
if it does, then the problem maybe lies on the hardware(attenna problem) or need a gps.conf fix..
Rainbowserpant said:
I recently tried to flash JellyMIUI_3.1.11_v2 custom rom on my HTC Desire HD.
Install instructions suggest to install FULL_WIPE_1.5_EXT4_ zip from sd card.
When attempting to intall full wipe i get the following error:
-Model ID - HTC Ace
-Ok to proceed
Now preparing for a clean install of any EXT4 ROM
Please be patient
1st boot may take a few minutes
-Formatting Data
-Formatting System
E: Error in /sdcard/FULL_WIPE_1.5_EXT_.zip
(status 1)
Installation aborted
Does anyone know why I would be getting this error or how to fix?
Despite this error I am still able to install the JellyMIUI_3.1.11_v2 custom rom although GPS does not work (not sure if this related)
Click to expand...
Click to collapse
I had that same problem when I used CWM recovery. I switched to TWRP and everything was ok. You could try that

brick tel. help please

Hay can you help me how I screwed tel. I wanted to drKetan Multitool adwance flas new kernel persius I chose this kernel perzius and when I went after the procedure I only marks skip everything and install kernel then it happened the phone has just started and it said samsung black screen and then I reset the recovery but it did not have a touch Philz, I now have nothing and I only have the option reebot system now, applay update from ADB, applay update from external storage, wipe data / factory reset, wipe cache partition and apply update from cache. I've tried install the new rom but when I go to applay Udate from external storage and choose the rom write me only
e: Failde to verify whole-file signature
if anyone can help me would be happy oodin I've tried to install a stock rom when I press the start waiting and possible signs get pit for mapping and that's all what I can do to
How about going to Download mode and install via ODIN?
See the toolbox for this.
ps: Your phone is NOT bricked!
Bricked means it doesn't do anything anymore and it cannot be revived.
eduka said:
Hay can you help me how I screwed tel. I wanted to drKetan Multitool adwance flas new kernel persius I chose this kernel perzius and when I went after the procedure I only marks skip everything and install kernel then it happened the phone has just started and it said samsung black screen and then I reset the recovery but it did not have a touch Philz, I now have nothing and I only have the option reebot system now, applay update from ADB, applay update from external storage, wipe data / factory reset, wipe cache partition and apply update from cache. I've tried install the new rom but when I go to applay Udate from external storage and choose the rom write me only
e: Failde to verify whole-file signature
if anyone can help me would be happy oodin I've tried to install a stock rom when I press the start waiting and possible signs get pit for mapping and that's all what I can do to
Click to expand...
Click to collapse
flash the pit file before flasing rom http://d-h.st/Dlv if u know how to do it using odin or search youtube but its simple as flashing rom
Hi thanks for the guidance and effort but sm already ustimal via Odin sm upload their new ricovery cwm 6 And now I work again all thanks again

[solved] Cant update to new CM rom?

Hi, I got a notice on CM updater that there was an 10.2 update so I dloaded it and let CM do its thing. Upon reboot everything seemed a little squirrley so I decided I was just going to do a clean flash.
Booted into recovery, wiped everything, but now every rom I try to flash gives me "set metadata recursive: some changes failed. Error executing updater binary n zip [path]" no matter what I try?
Any clue as to what is going on here?
edit: I can get in and out of recovery. I can push via adb. Also wiped via fastboot -w.
thx
EDIT: ended up getting everything back to stock and starting over. Thanks for looking.
Try updating your recovery (CWM/TWRP) to the latest.
Sent from Samsung Galaxy S Relay 4G @ CM11
updated to latest TWRP.
I'm getting errors about it being unable to mount /sdcard when I attempt to flash...
Ok it turned out I installed an older version of TWRP.
Flashed 2.6.3.2
When I attempt to flash a new rom I get this:
updating partition details.......
Full SELinux support is present
E: Failed to decrypt data
Formatting Cache using make_ext4fs fucntion.
Updating partition details...
E: Failed to wipe dalvik
Updating partition details...
Error flashing zip /sdcard/cm-11 nighty blah blah
Updating partition details...
FAILED
Click to expand...
Click to collapse
Am I screwed at this point? Do I need to revert everything back to original somehow? Kind of lost here at the moment.
thx

[Q] Trouble installing Gapps ACE II cm11 4.4.4 (status 7)

SOLVED read below
I was just installing cm11.0_codina.nova.20140623 (mclaw) from stock 4.1 without any alternation, following instructions:
Reboot to recovery mode
Select "Wipe data / Factory Reset"
Select "Install the zip from External Storage"
Choose the CM zip file: -> cm11.0_codina.nova.20140623 (mclaw)
Choose the GApps zip file: -> pa_gapps-modular-micro-4.4.4-20140620-signed
and get the message after mounting system...
file_getprop: failed to start "/system/build.prop": No such file or directory
E:Error in /tmp/sideload/package.zip
(status 7)
What's going wrong, also tried the mini gapps , same message, both checked md5.
So just to be clear i have nothing extra installed like CWM as it is not stated in tutorial. Just with the native bootmenu as it is.
So what can i try next? It boots fine but without gapps its not complete.
EDIT:
I've rebooted and now came in different bootmenu where the installation went fine, so i guess it needed a reboot what was missing in instructions.
DriversSeat said:
SOLVED read below
I was just installing cm11.0_codina.nova.20140623 (mclaw) from stock 4.1 without any alternation, following instructions:
Reboot to recovery mode
Select "Wipe data / Factory Reset"
Select "Install the zip from External Storage"
Choose the CM zip file: -> cm11.0_codina.nova.20140623 (mclaw)
Choose the GApps zip file: -> pa_gapps-modular-micro-4.4.4-20140620-signed
and get the message after mounting system...
file_getprop: failed to start "/system/build.prop": No such file or directory
E:Error in /tmp/sideload/package.zip
(status 7)
What's going wrong, also tried the mini gapps , same message, both checked md5.
So just to be clear i have nothing extra installed like CWM as it is not stated in tutorial. Just with the native bootmenu as it is.
So what can i try next? It boots fine but without gapps its not complete.
EDIT:
I've rebooted and now came in different bootmenu where the installation went fine, so i guess it needed a reboot what was missing in instructions.
Click to expand...
Click to collapse
search, dude... -.-
Sent from my GT-I8160 using Tapatalk
teddytsen said:
search, dude... -.-
Sent from my GT-I8160 using Tapatalk
Click to expand...
Click to collapse
U can't expect people to read everything that comes up in search, after 20 pages im done and ask a question. But it's solved now and maybe now other people can eat the fruits of my question... o.-
just something like that
http://www.droidviews.com/download-google-apps-gapps-for-your-android-device-on-gbicsjb/
Code:
Warning:
Do not try to install the Google Apps package via Stock Recovery or you might get “signature verification” error, and if installed it might create internal conflicts. If you have to update a Google app, do it via Google Play Store or by installing the APK file manually if you have it.

Tab 3 8.0 - Can't install this package on top of incompatible data

EDIT: Resolved! For anybody else having the issue, ensure you wipe data in TWRP by going to wipe > Format Data AS WELL AS using the normal wipe. I had, in my frustration completely forgotten about this option and assumed formatting /data/ in advanced wipe was the same thing... well, I've learned my mistake after it's cost me the best part of a day trying to solve... derp
I've ran into an incredibly annoying issue that's preventing me from installing any CyanogenMod roms on my Galaxy Tab 3 8.0 (lt01wifi).
The issue is, no matter how many times I attempt it, no matter what I seem to do I cannot install roms via TWRP or Phillz, I always run into the error -
Code:
Installing update... detected filesystem ext4 for /dev/block/platform/dw_mmc/by-name/SYSTEM detected filesystem ext4 for /dev/block/platform/dw_mmc/by-name/USERDATA Can't install this package on top of incompatible data. Please try another package or run a factory reset E: Error in /storage/sdcard1/Resurrection-Remix-LP-v5. (Status 7) E: Installation Aborted
I've tried the suggestions I've found online and on XDA. Most of which seem to be as simple as factory resetting, wiping cache and dalvik cache etc and from what I've seen that's worked for everybody else - yet not on my tablet >.<
Quick rundown of what I've done so far
1) Install TWRP or Phillz via odin 307
2) Update TWRP or Phillz to the latest version (however I have tried custom and older versions of the recovery with the same result)
3) Wipe Cache and factory reset (tried before AND after attempting to install the rom, including wiping the dalvik cache)
4) Still run into the error, repeat the process in a different order / trying different things / reinstalling stock roms / rooting / trying different unofficial versions of CyanogenMod
I've tried both CyanogenMod 13 and Resurrection Remix, ensuring that I've got the lt01wifi version each time.
I've tried pretty much everything I can think of myself and everything suggested online - I'm flat out of options. Factory resetting SHOULD work, it's worked for everyone else I've seen...

Categories

Resources