Any way to see both 1G signal strength as well as 4G? - Verizon HTC One (M7)

On my old RAZR M (and I think my previous Samsungs) I was able to go into the settings menu (SETTINGS>ABOUT>NETWORK) and was able to see 1G signal strength in dbm as well as 4G (simultaneously).
I know it sounds like something stupid, but I always use this information because I install professional cell phone boosters, and it helps to check both signals (1G for voice and 4G for data. Most of the boosters I install only affect the 1G/Voice portion).
Does anyone know of an app that can show this?

Related

Voice vs. 3G Data Signal ( bar )

Voice vs. 3G Data Signal ( bar ) : Are these separted in any status bar mods?
Is it possible?
I've never seen one that separates them, however AOSP roms will always show the 3g strength instead of voice strength.
sitlet said:
I've never seen one that separates them, however AOSP roms will always show the 3g strength instead of voice strength.
Click to expand...
Click to collapse
Well that is good to know. And explains the discrep I notice when driving, would like to see these broken out somehow though
Hey,
When making calls you are only using 1x and that is many times what your signal strength is, "Except as noted above by Sitlet ASOP which use the bars as 3g". When you are using data on lets say a sense rom you know its going through because you see the 3g on your status bar going. Now there are apps out there which allow you to see the signal strength in decibels and that would be the best way to determine your actual signal strength via 3g 1x 4g etc, but to answer your question I have never seen any mods that do this for you!
Hope I helped if I did please hit the thanks!
Stevo

[Q]Force gsm nexus to automatically switch to 2G sooner in low reception area?

i noticed that i get much better 2g reception in my house than 3g so would it be possible to set the galaxy nexus to make the switch to 2g sooner and automatic? im using a toggle right now but it would be nice to be able to set the point at which the phone will make the jump to 2g.
The 3g signal is so weak in certain areas that i dont lose the signal but i wont be able to receive calls and goes straight to voicemail but the annoying thing is that sometimes the phone doesnt make the jump to 2g. Im using the mod in aokp to see my signal in dBm instead of the bars and have found the difference is -111 to -113dBm for 3G and under -100dBm for 2G in the same spot. i would like to be able to set the phone to make to jump to 2G when the 3G signal is weaker than -110dBm for example.
anyone? do we know how the phone decides when to switch to 2g?
Why don't you just keep manually toggling it as needed? Problem solved. That said goto YouTube and watch the everything is amazing but nobody is happy video.
And remember kids. Your smartphone is not a pacifier.
iphone. helping computer illiteracy become popular since 2007.
cause it would be easier if it did it automatically like its suppose to. if i forget to toggle the 2g everytime i home then i miss a call in the house? this is a phone we're talking about im not asking for anything special just for it to work like its suppose to.
neotekz said:
? this is a phone we're talking about im not asking for anything special just for it to work like its suppose to.
Click to expand...
Click to collapse
Exactly. Couldn't have said it better myself. Now I need to go start a thread asking how come my phone won't clean my room. Ç'mon it's a smartphone.
iphone. helping computer illiteracy become popular since 2007.
receiving calls and making calls is not something special for a 700 dollar phone. this is the first phone i got that has this kind of trouble switching between 2g and 3g. go troll somehwere else if you have nothing helpful to add.
Seriously what is so hard about manually toggling your phone to 2g at home? I have to do it occasionally still even though 3g isn't the juice sucker it used to be a few years ago. Another alternative is to get a micro cell but I an sure you don't want to pay ~$200 and $20 a month. There are apps that will do the 2g toggle when you're on your home wifi. Nfc tag might be able to do it too. It seems you want somebody to write an app specifically for your "problem".
iphone. helping computer illiteracy become popular since 2007.
you're really not getting it, its not about a toggle and im not asking anyone to make an app so i dont have to use the toggle. im not talking about switching to 2g to save battery or data but when the 3g is weak or isnt there and there is a stronger 2g signal available. i am using a toggle right now but thats not a solution. this is a phone, i shouldnt have to toggle anything to make calls. All my previous android phones stayed in 2g 90% of the time in my house all by themselves.
Phones are suppose to be able to switch between 2g and 3g when 3g is not available or is too weak, the galaxy nexus is not doing that properly it hangs at 3g even to the point where it drops the signal and there's always is a good 2g signal that it should be going to. i have no 2g deadspots in my house but a few for 3g.
i've tried all the radios and they all have this problem some worst than others. i was just thinking if there is a way to mod the phone so that it will switch to 2g sooner or faster
And I am telling you to do it manually to solve your issue. You still want it done faster automatically and nobody here is going to be able to mod a radio for you. Aside from aaaaaaaall the barriers prohibiting devs from doing so, there is just plain and simple the issue of it actually transferring from 2 to 3 and 3 to 2, handshaking with the tower which is not instaneous. Like I said watch that video and get a grip and laugh. The best and fastest solution is manually. I have to do it myself occasionally for different reasons. If you don't like having to do something manually because you have a $700 smartphone then all I can tell you is good luck with the rest of your life.
--------+++--------
iphone. helping computer illiteracy become popular since 2007.
i looked into this some more and it turns out there is a setting that can do exactly what i want but is disabled in the new 4.0.4 update. in the *#*#4636*#*# menu you can set network preferred type to gsm auto prl which will only switch to 3g if there is a strong signal and will favor 2g. With the new update(4.0.4) the setting cannot be changed and is stuck on wcdma preferred which is the opposite of gsm auto prl, favors 3g over 2g. hopefully this can be fixed somehow so that the network settings can be changed.
neotekz said:
i looked into this some more and it turns out there is a setting that can do exactly what i want but is disabled in the new 4.0.4 update. in the *#*#4636*#*# menu you can set network preferred type to gsm auto prl which will only switch to 3g if there is a strong signal and will favor 2g. With the new update(4.0.4) the setting cannot be changed and is stuck on wcdma preferred which is the opposite of gsm auto prl, favors 3g over 2g. hopefully this can be fixed somehow so that the network settings can be changed.
Click to expand...
Click to collapse
I'd stay out of that menu on nexus. It has caused many a problem for gnex owners, one which is it automatically goes back to default setting no matter what you select and erasing smsc number randomly. Toggling 2g in settings or getting a 2g/3g toggle in power control is fastest and easiest solution still.
--------+++--------
iphone. helping computer illiteracy become popular since 2007.

Tasker profile help

I want my phone to turn off 3g connectivity automatically and go to 2g only when I connect to a wifi network and then back to 3g connectivity when i disconnect from wifi. Does anyone have a profile for this already set up and if so would you mind sharing. Im terrible at setting up tasker. Thank you in advance.
Isn't 3g automatically turned off when connected to wifi?
Swyped on my CM9 Galaxy Nexus
the reason i ask is because i get terrible reception in my apt. when on 3g signal...if i turn off the 3g connectivity and go 2g only, then my signal increases to full strength. this remains true with wifi enabled or disabled. I'm not doing it for the data connection as I am connected to wifi...i want it for the basic cell signal so i can make and recieve phone calls and sms's. does this make any sense at all...i fell like im rambling.
Anyway, do this:
New profile - state - wifi connected - don't put anything in the next screen.
New task - net - mobile data 2g/3g - 2g only
You have to make a task to turn it on again as well. Gl hf
Swyped on my CM9 Galaxy Nexus
Thanks for the help...it was much appreciated...it works great and i figured out how to get it to work in reverse as well.
I don't mean to hi-jack this thread, but I am hoping that some smart folks could give me some ideas or help with creating a Tasker profile.
where I work there are areas where the signal is great and other areas where it's non-existent or very weak. I am hoping to devise a profile that will cause the phone to turn of the radio if the signal is very low or none than turn the radio on again in 10 or 15 minutes to see if the signal is better. If it is still weak than.... you get the point, right? I'm not sure where start. There's a variable that contains the signal so I know that I will check it than run a task if it's low, but I'm not sure how to proceed from there and implement a timer.
any help please?
Sent from my Galaxy Nexus using Tapatalk 2
the signal strength can be used as a context in state>phone>signal strength

3G Mobile Network and Icon

I'm hoping this is not a bug, but there have been times when I try to fire-up a web-based app, like streaming music, that I can't get even a 3G connection yet I have multiple signal strength bars. The 3G icon is gone even if I turn Mobile Network off then back on. I don't think I had this problem with my EVO 4G using 3G. Is it just because it can't pick up on a 3G signal even though I have 3-5 bars?
The Network Mode is currently set to CDMA/LTE/EVDO even though we probably won't have 4G in Columbus until the end of next year. I kind of miss my WiMax 4G. Now that I think of it, I changed it to CDMA only. Maybe that will help.
Wadester said:
I'm hoping this is not a bug, but there have been times when I try to fire-up a web-based app, like streaming music, that I can't get even a 3G connection yet I have multiple signal strength bars. The 3G icon is gone even if I turn Mobile Network off then back on. I don't think I had this problem with my EVO 4G using 3G. Is it just because it can't pick up on a 3G signal even though I have 3-5 bars?
The Network Mode is currently set to CDMA/LTE/EVDO even though we probably won't have 4G in Columbus until the end of next year. I kind of miss my WiMax 4G. Now that I think of it, I changed it to CDMA only. Maybe that will help.
Click to expand...
Click to collapse
The "signal bars" have nothing to do with your 3G connection...they only indicate voice call signal strength.
To check 3G signal strength go into your dialer...
Enter ##DEBUG#
Code: 777468
Debug Menu:
Select EVDO Eng RF
Pwr= Signal Strength
Better than -96dBm is a great signal
Between -97dBm and -107dBm is good
Between -108dBm and -114dBm is fair
Worse than -115dBm is poor
Bandage said:
The "signal bars" have nothing to do with your 3G connection...they only indicate voice call signal strength.
To check 3G signal strength go into your dialer...
Enter ##DEBUG#
Code: 777468
Debug Menu:
Select EVDO Eng RF
Pwr= Signal Strength
Better than -96dBm is a great signal
Between -97dBm and -107dBm is good
Between -108dBm and -114dBm is fair
Worse than -115dBm is poor
Click to expand...
Click to collapse
Bandage you on the gn2 now :what:
:thumbup:
Sent from my SPH-L900 using xda premium
radrian92 said:
Bandage you on the gn2 now :what:
:thumbup:
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
yerp yerp...I'm smitten
You may have a connection problem with your GN2. I had some similar problem. I would taken it in to Sprint and see what they can do. Maybe it's tower upgrades in your area....
Happens to me sometimes too. Just a garbage tower. I have emailed the network guys to open a ticket and they got pissed I emailed them directly. It's a tower issue and no mine is not getting upgraded for a while.
Sent from a little old Note 2
CIM
Nice Post
Bandage said:
The "signal bars" have nothing to do with your 3G connection...they only indicate voice call signal strength.
To check 3G signal strength go into your dialer...
Enter ##DEBUG#
Code: 777468
Debug Menu:
Select EVDO Eng RF
Pwr= Signal Strength
Better than -96dBm is a great signal
Between -97dBm and -107dBm is good
Between -108dBm and -114dBm is fair
Worse than -115dBm is poor
Click to expand...
Click to collapse
My Rx Pwr is in positive nbrs. Is this correct?
masber2000 said:
My Rx Pwr is in positive nbrs. Is this correct?
Click to expand...
Click to collapse
Is there an app out there that would display the 3g or 2g signal strength on the status bar.
It frustrates me i can even search but have full voice service, at least with the signal strength indicator i would understand
pkny said:
Is there an app out there that would display the 3g or 2g signal strength on the status bar.
It frustrates me i can even search but have full voice service, at least with the signal strength indicator i would understand
Click to expand...
Click to collapse
I use this one...Open Signal ...it has a widget that will show signal strength also.

use only 2g and 4g (3g to 2g drops calls)?

Is there any way (app or otherwise) to disable 3g but keep on lte? When I'm at work (a lot) I would rather have the option to use just those 2 but no 3g . Is there any way this is possible? I'm on slimkat so this might be a question to ask in the general android, but I never get answers when I ask there, so I"m trying here.
whenever I go from 3g to 2g it drops signal for a second and drops calls, but when going from lte to 2g it doesn't (and without 3g the calls should default to 2g and I wouldn't drop them on campus) so if anyone knows why the signal drops that could also solve my problem

Categories

Resources