[Q] Help Unbricking Kindle Fire! - Kindle Fire Q&A, Help & Troubleshooting

I tried to root my 1st Generation Kindle Fire using the Kindle Fire Utility. I chose the fastboot option and then the device rebooted. Then my computer said "USB Device Malfunctioned" and the Kindle Fire Utility could not detect the device. Now my Kindle cannot get past the boot screen. Can someone help me please?

Related

[Q] bricked kindle fire

Ok guys need help. I downloaded go launcher apk installed it on my kindle fire set to default launcher and now my kindel fire is hung a boot up. Tried the rebooting method and it just hangs at kindle fire screen. Is there anything i can do ?
Hmmm you should try the kindle fire unbrick utility.. that might help... check your boot status in kfu though..
I have exactly the same issue. I tried the kindle unbricking utility but it just stops at Waiting for device, even after I reinstalled the android composite interface.Please help

Kindle Fire Stuck on Kindle Fire Boot Screen

So I was using KFU and while trying to complete the permanent root option my computer frooze and I was forced to restart it manually. Upon restarting the computer my Kindle Fire is now stuck on the Kindle Fire boot screen. If I plug the KF into my computer while it is turned off it begins to install the ADB driver software but as soon as it turns on it stops working and after I unplug the device and replug it back in it says device cannot be recognized. My KF does not have TWRP and it not rooted so is there ANYTHING I can do to unbrick it?
Thanks,
Zach
You can make a Factory cable to install twrp when your kf is bricking. After then you can easy to flash new Rom.
send from my kindle fire using cm7

[Q] Cannot Boot Kindle Fire 2

I have a Kindle Fire 2. I received it in this state and do not know exactly what was done previously.
On power up, it goes to the Kindle Fire logo, then to a blank screen. All I can do here is hold down power to power it off.
I have a factory original cable. Connecting to a PC, it goes to a fastboot screen with a green/red traffic light with the green light flashing. If I use a PC that previously had a Kindle Fire connected, the device is recognized. However, I get "device not found" or similar when attempting to use any options on the Kindle Fire Unbrick Utility 1.1, or Kindle Fire Utility.
On a PC that did not have a Kindle Fire previously connected, device manager sees it as an unknown device (or rather a particular non-Kindle device--don't have it here it with me and will update with that info if it is relevant). I have loaded drivers using ADB but the PC does not recognize it as a Kindle. As I expected, neither utility recognizes the connected Kindle here either.
Any advice on where to go from here? The hurdle seems to be just getting the PC talking to the Kindle and I'm not sure how to proceed.
I got the same problem, any helps
Sorry, I never got it working. It's collecting dust at the moment.
Kobusama said:
I have a Kindle Fire 2. I received it in this state and do not know exactly what was done previously.
On power up, it goes to the Kindle Fire logo, then to a blank screen. All I can do here is hold down power to power it off.
I have a factory original cable. Connecting to a PC, it goes to a fastboot screen with a green/red traffic light with the green light flashing. If I use a PC that previously had a Kindle Fire connected, the device is recognized. However, I get "device not found" or similar when attempting to use any options on the Kindle Fire Unbrick Utility 1.1, or Kindle Fire Utility.
On a PC that did not have a Kindle Fire previously connected, device manager sees it as an unknown device (or rather a particular non-Kindle device--don't have it here it with me and will update with that info if it is relevant). I have loaded drivers using ADB but the PC does not recognize it as a Kindle. As I expected, neither utility recognizes the connected Kindle here either.
Any advice on where to go from here? The hurdle seems to be just getting the PC talking to the Kindle and I'm not sure how to proceed.
Click to expand...
Click to collapse
Kindle Fire Unbrick Utility 1.1, and Kindle Fire Utility are for the Kindle Fire 1 only

[Q]FASTBOOT MODE CANT INSTALL DRIVER NOT RECOGNIZED MY KINDE FIRE(pleasehelp)

first i attemp to root my kindle fire 6.3.2 in first i install the driver when i open kindle fire utility adb statusnline i thought its was success and then i type 2 and "install permanent root with super user" after that its waiting to install FFF and my kindle fire stuck p in "kindle fire" logo and now i cant connect it to computer is there anyway i could fix this? please help i really need it.

ADB doesn't recognize kindle fire 5th gen MACOSX

Hi there, I notice that my kindle fire was drying the battery and I notice that was by Alexa apps. So when I was trying to uninstall it using the ADB it's not recognized when I connected the kindle to my PC.
the kindle fire SO was updated to Fire Os 5.3.6.4
So I need to try to fix this problem.
Thanks a lot.

Categories

Resources