I have a Kindle Fire 2. I received it in this state and do not know exactly what was done previously.
On power up, it goes to the Kindle Fire logo, then to a blank screen. All I can do here is hold down power to power it off.
I have a factory original cable. Connecting to a PC, it goes to a fastboot screen with a green/red traffic light with the green light flashing. If I use a PC that previously had a Kindle Fire connected, the device is recognized. However, I get "device not found" or similar when attempting to use any options on the Kindle Fire Unbrick Utility 1.1, or Kindle Fire Utility.
On a PC that did not have a Kindle Fire previously connected, device manager sees it as an unknown device (or rather a particular non-Kindle device--don't have it here it with me and will update with that info if it is relevant). I have loaded drivers using ADB but the PC does not recognize it as a Kindle. As I expected, neither utility recognizes the connected Kindle here either.
Any advice on where to go from here? The hurdle seems to be just getting the PC talking to the Kindle and I'm not sure how to proceed.
I got the same problem, any helps
Sorry, I never got it working. It's collecting dust at the moment.
Kobusama said:
I have a Kindle Fire 2. I received it in this state and do not know exactly what was done previously.
On power up, it goes to the Kindle Fire logo, then to a blank screen. All I can do here is hold down power to power it off.
I have a factory original cable. Connecting to a PC, it goes to a fastboot screen with a green/red traffic light with the green light flashing. If I use a PC that previously had a Kindle Fire connected, the device is recognized. However, I get "device not found" or similar when attempting to use any options on the Kindle Fire Unbrick Utility 1.1, or Kindle Fire Utility.
On a PC that did not have a Kindle Fire previously connected, device manager sees it as an unknown device (or rather a particular non-Kindle device--don't have it here it with me and will update with that info if it is relevant). I have loaded drivers using ADB but the PC does not recognize it as a Kindle. As I expected, neither utility recognizes the connected Kindle here either.
Any advice on where to go from here? The hurdle seems to be just getting the PC talking to the Kindle and I'm not sure how to proceed.
Click to expand...
Click to collapse
Kindle Fire Unbrick Utility 1.1, and Kindle Fire Utility are for the Kindle Fire 1 only
Related
So I was using KFU and while trying to complete the permanent root option my computer frooze and I was forced to restart it manually. Upon restarting the computer my Kindle Fire is now stuck on the Kindle Fire boot screen. If I plug the KF into my computer while it is turned off it begins to install the ADB driver software but as soon as it turns on it stops working and after I unplug the device and replug it back in it says device cannot be recognized. My KF does not have TWRP and it not rooted so is there ANYTHING I can do to unbrick it?
Thanks,
Zach
You can make a Factory cable to install twrp when your kf is bricking. After then you can easy to flash new Rom.
send from my kindle fire using cm7
Hi.
I tried to install cyanogenmod on my Kindle Fire. Unfortunately, my device has been bricked....
First of all, I installed sdk manager with platform tools and google usb driver. I did everything to computer can work with Kindle Fire (finally I used "Kindle Fire Driver" pack because when I want to install driver by "Kindle Fire Utility" I can see error, because I haven't english version of Windows).
In the end I turned on "Kindle Fire Utility", I connected device to computer. Device was seen in the computer and "KFU". Then I gave a command to install root and superuser. After this command, I read my device will be relaunch in fastboot mode. KFU tried to download and install
TWRP, but it wasn't complete, because "KFU" couldn't connect with server. Application finished work and my Kindle Fire has been frozen. Now I can see only "Kindle Fire" logo. When I connect Kindle Fire, computer don't recognize it.
What Can I Do? I read that device is again and again in fastboot mode. What should I do to bring this device to life?
I read any command, but I can't do nothing, because computer can't see device.
Please, help me . Thanks in advance and best regards.
And...sorry for my english, I hope You'll understand me.
edgdob said:
Hi.
I tried to install cyanogenmod on my Kindle Fire. Unfortunately, my device has been bricked....
First of all, I installed sdk manager with platform tools and google usb driver. I did everything to computer can work with Kindle Fire (finally I used "Kindle Fire Driver" pack because when I want to install driver by "Kindle Fire Utility" I can see error, because I haven't english version of Windows).
In the end I turn on "Kindle Fire Utility", I connected device to computer. Device was seen in the computer and "KFU". Then I gave a command to install root and superuser. After this command, I read my device will be relaunch in fastboot mode. KFU tried to download and install
TWRP, but it wasn't complete, because "KFU" couldn't connect with server. Application finished work and my Kindle Fire has been frozen. Now I can see only "Kindle Fire" logo. When I connect Kindle Fire, computer don't recognize it.
What Can I Do? I read that device is again and again in fastboot mode. What should I do to bring this device to life?
I read any command, but I can't do nothing, because computer can't see device.
Please, help me . Thanks in advance and best regards.
And...sorry for my english, I hope You'll understand me.
Click to expand...
Click to collapse
If i am correct, you should be able to turn it off by holding the power button until the screen turns black while stuck... then just reboot normally.
Thanks for reply. Unfortunately each time when I turn on device, it's stuck on logo .
Edit: When I turn on KF I can see Kindle Fire logo all time, it doesn't disappear.
edgdob said:
Thanks for reply. Unfortunately each time when I turn on device, it's stuck on logo .
Edit: When I turn on KF I can see Kindle Fire logo all time, it doesn't disappear.
Click to expand...
Click to collapse
Sorry, im sort of new here so i kinda guessed. :/
I hope someone else sees this thread.
EDIT:There may be hope! According to this thread http://forum.xda-developers.com/showthread.php?t=1832812 . He has the same problem... try booting into the recovery menu then clear the cache.
The problem is my device has stock bootloader installed, so I can't do this .
I will read some articles, maybe I bring this device to life, but I'm losing hope. Drivers are installed correctly (I think so) and computer recognized unknown device (with problems) - I can't do nothing.
http://forum.xda-developers.com/showthread.php?t=1833361
look
go back to the kindle fire utility and choose option 1 then choose the option with the 4000 number and thats it.
Ok, you're right! Kindle Fire change bootmode from 4000 (normal) to fastboot (4002). When I plug and unplug device, computer doesn't recognize it. But when I turn on device and connect to computer - it works! I can see ADB Composite ADB Interface.
Thanks for all reply .
Good
edgdob said:
Ok, you're right! Kindle Fire change bootmode from 4000 (normal) to fastboot (4002). When I plug and unplug device, computer doesn't recognize it. But when I turn on device and connect to computer - it works! I can see ADB Composite ADB Interface.
Thanks for all reply .
Click to expand...
Click to collapse
Is it up and running m8?:good:
I'm having this same problem with the computer not recognizing the kindle as it is stuck on the boot screen. However, nothing I do gets the computer to recognize that the KF is plugged in. Further, after initially only being frozen on the KF boot screen, now when I plug in the KF it just flashes the "Kindle Fire" screen over and over, shutting itself on and off in an endless loop. Computer can't recognize the KF, none of the utilities pick it up and I don't know how to go back and uninstall the drives because the device itself won't even show up on my computer. Everyone who has this boot screen problem seems to fix it by changing to or from fastboot, but my device doesn't seem to be able to communicate with the computer at all any more. Suggestions?
Your battery is flat http://forum.xda-developers.com/showthread.php?t=1623244 .
killyridols said:
I'm having this same problem with the computer not recognizing the kindle as it is stuck on the boot screen. However, nothing I do gets the computer to recognize that the KF is plugged in. Further, after initially only being frozen on the KF boot screen, now when I plug in the KF it just flashes the "Kindle Fire" screen over and over, shutting itself on and off in an endless loop. Computer can't recognize the KF, none of the utilities pick it up and I don't know how to go back and uninstall the drives because the device itself won't even show up on my computer. Everyone who has this boot screen problem seems to fix it by changing to or from fastboot, but my device doesn't seem to be able to communicate with the computer at all any more. Suggestions?
Click to expand...
Click to collapse
Do you have TWRP or any other bootloader installed?
I've attempted to root my kindle fire with the kindle fire utility and it wasn't 100% successful.
Im stuck on the kindle fire screen where it's booting up and it's on an endless cycle whether
plugged into the computer, or charging through the outlet. It's also completely unrecognized
when I do plug it into my laptop. Any help would be greatly appreciated to unbrick it.
Important: When the battery wasn't dead it just stayed at the kindle fire and recognized.
But using Kindle Fire Utility and a few other unbricking programs could not find the device.
uh yeah a usb drive, pedrive universal usb creator and this http://forum.xda-developers.com/showthread.php?t=1850038
I had a similar experience today rooting my friends kindle fire... The kf utility kept giving me a error, something about removing a root check. And it just kept booting into recovery so on boot up where twrp gives you the 3 options... Normal boot, recovery, or change bootmode I just selected change bootmode and it booted right on up and worked fine...root is good and alls was well every since... Not saying this will solve your problem but just figured I'd share incase... Goodluck!
Sent from my Galaxy Nexus using xda app-developers app
Here is what I did to fix mine
Hello,
First things first, did you have ADB installed correctly?
I had the same issue that you are having now and I was freaking out.
I was sure my kindle was bricked and my wife was going to be pizzed at me.
After about 2 hours of searching the forums, I found out that getting stuck at the kindle logo screen is pretty common.
When you are stuck at this screen you are stuck in "fast boot"
Here is what I did to fix mine.
Mine was having the exact same issue as yours.
I could not get my PC to recognize my kindle at all and I was stuck at the logo screen.
1. Unplug kindle from PC
2. Hold down power button for 30 seconds until it powers off
3. Plug kindle into PC and power it on
4. More than likely PC will still not recognize it
5. Open Kindle Fire Utility program and choose Option 1 for boot menu
6. Then press 1 again to tell kindle to boot normally and press enter
7. The KFU should say something like "kindle is being told to boot normally"
8. Once kindle reboots, you should be good to go
9. PC should recognize kindle now
I would say once this is done, uninstall your drivers for kindle and reboot your PC
Once PC is back up, reinstall the ADB drivers and try KFU again.
As a side note, ADB would not work on my PC which is running XP
I was able to use KFU on my wife's PC which is running windows 7 and I know have root access.
I am currently running JandyCane on my kindle
All I am left with is "Waiting for device" in kindle fire utility..
try this
Greymooses said:
All I am left with is "Waiting for device" in kindle fire utility..
Click to expand...
Click to collapse
OK, what happened when you plugged it back into your PC did it recognize it?
Can you uninstall the drivers for it and then reinstall the drivers for it?
What OS are you running?
I don't use Windows so I couldn't say for sure whether this works or not, but it's worth a try.
http://forum.xda-developers.com/showthread.php?p=30681311
This is my second time rooting my Gen1 Kindle Fire. (The first time was very successful but stupid me, I went back to factory settings for no good reason).
From KF's updated software (6.3.2) I used Kindle Fire Utility 0.9.9, to install TWRP 2.6 and other google apps. I loaded TWRP and cleared cache etc. I then installed the new CM 10.1 SGT 7 rom. When i rebooted the KF, i didnt get the option to boot into twrp. What happens now is, it shows the orange Kindle Fire boot screen, and then continues to the CM10.1 boot screen. I may have installed CM10 over the KF software somehow. Now, my PC recognizes it as a Kindle Fire when I plug in the USB but there's an error in the device manager. Basically, KFU doesn't recognize it's a Kindle anymore. When I try to reboot it in recovery mode, it just does a regular reboot. Nothing about my KF looks like there's twrp installed in the background. I can't access it no matter what.
I tried sideloading Google Play and installing the TWRP Manager app but that doesn't do anything at all. I feel like my KF is going to be stuck like this forever. Any way to hard reset everything without TWRP? I have the proper "update.zip" file on the sdcard but I can't access any way to Wipe it and Install it.
Just so you know, the kindle isn't bricked it just seems like it's permanently stuck the way it is and my PC won't recognize its harddrive via USB.
Any suggestions?
Still no replies huh? Damn.
So when I turn on my kindle fire, the orange Kindle Fire logo shows up for a few seconds THEN the CyanogenMod boot screen comes up. I never get the option to boot into TWRP.
When I plug my KF into my PC, the Kindle Fire drivers get an error so i change it into an Android ADB Composite device. It still won't recognized the device properly. When I open up the console and try "adb devices" nothing shows as connected. I've installed the SDK and changed the files but it's the same thing. All that to say, the KFU no longer recognizes when the KF is plugged in.
MikeyNooch said:
Still no replies huh? Damn.
So when I turn on my kindle fire, the orange Kindle Fire logo shows up for a few seconds THEN the CyanogenMod boot screen comes up. I never get the option to boot into TWRP.
When I plug my KF into my PC, the Kindle Fire drivers get an error so i change it into an Android ADB Composite device. It still won't recognized the device properly. When I open up the console and try "adb devices" nothing shows as connected. I've installed the SDK and changed the files but it's the same thing. All that to say, the KFU no longer recognizes when the KF is plugged in.
Click to expand...
Click to collapse
try again with ver 9.6
[HELP] Unbricking Kindle Fire HD7" with Fastboot Cable; pc won't recognize Kindle
Lemme start from the beginning. (I've made numerous threads before I had a fastboot and commentors kept asking questions that I've answered in the post so I'm gonna try to be detailed as possible)
Before I had a fastboot cable
I flashed a ROM onto my Kindle Fire (Cyanogen 13). Didn't like it so I thought a recover to factory settings would work. It didn't and it got stuck on the TWRP screen. Stuck on TWRP meaning that it's literally stuck on the blue TWRP screen. It doesn't get to the main menu or anything. I scoured the internet for solutions and some (which didn't mention a special cable) I tried but it ultimately failed because the program (can't list every single one but one I do remember is Kindle Fire Unbrick Utility), could NOT find my Kindle Fire. Also, Kindle Fire could not be found under "this PC" but when I plugged it in, it made the ding sound and could be found under ""Device Managers". I started reading steps about using a fastboot cable and was led to believe if you use one, your PC should recognize Kindle, therefor programs to unbrick should find the Kindle.
Got my fastboot cable today
I ordered one from Amazon and when I plug my Kindle in with cable, it turns on saying "fastboot kindle fire". I was excited to get this fixed finally. I followed a YouTube video's instruction (of a channel that I can count on) Tekify's Unbrick Kindle Fire. I did all the installing ADB drivers and what not but once I plugged the Kindle in and then opened the Unbrick program (this one Unbrick Utility). I pressed "1" on my keyboard to wipe everything on device. But once I pressed enter it sat on <waiting for device>. I checked under Device Managers and under Other Devices, Tate was there. But I couldn't find the Kindle under "This PC" still.
I've already researched this specific issue and people said to go to Tate's properties and update driver software. Then browse your PC for the Kindle under "This PC" but can't because Kindle doesn't show up under there. I know this is a Bible's worth of words but I really want to get this tablet FIXED!
CrustyLube said:
Lemme start from the beginning. (I've made numerous threads before I had a fastboot and commentors kept asking questions that I've answered in the post so I'm gonna try to be detailed as possible)
Before I had a fastboot cable
I flashed a ROM onto my Kindle Fire (Cyanogen 13). Didn't like it so I thought a recover to factory settings would work. It didn't and it got stuck on the TWRP screen. Stuck on TWRP meaning that it's literally stuck on the blue TWRP screen. It doesn't get to the main menu or anything. I scoured the internet for solutions and some (which didn't mention a special cable) I tried but it ultimately failed because the program (can't list every single one but one I do remember is Kindle Fire Unbrick Utility), could NOT find my Kindle Fire. Also, Kindle Fire could not be found under "this PC" but when I plugged it in, it made the ding sound and could be found under ""Device Managers". I started reading steps about using a fastboot cable and was led to believe if you use one, your PC should recognize Kindle, therefor programs to unbrick should find the Kindle.
Got my fastboot cable today
I ordered one from Amazon and when I plug my Kindle in with cable, it turns on saying "fastboot kindle fire". I was excited to get this fixed finally. I followed a YouTube video's instruction (of a channel that I can count on) Tekify's Unbrick Kindle Fire. I did all the installing ADB drivers and what not but once I plugged the Kindle in and then opened the Unbrick program (this one Unbrick Utility). I pressed "1" on my keyboard to wipe everything on device. But once I pressed enter it sat on <waiting for device>. I checked under Device Managers and under Other Devices, Tate was there. But I couldn't find the Kindle under "This PC" still.
I've already researched this specific issue and people said to go to Tate's properties and update driver software. Then browse your PC for the Kindle under "This PC" but can't because Kindle doesn't show up under there. I know this is a Bible's worth of words but I really want to get this tablet FIXED!
Click to expand...
Click to collapse
this is only for kindle fire 1 (2011)
there is a separate section for your device see
Fire Index: Which Amazon (Kindle) Fire Do I have?
for correct forum link
Sent from my XT1096 using XDA Labs