Related
I'm curious if there is a stiffer/stronger silicone case out there. I had a hard silicone case for my ipod touch and miss it. The htc silicone case is just to flimsy and I'm not wanting a hard case never had any luck with them
Sent from my EVO using Tapatalk
What you want is a TPU case. It's a different material than silicon, somewhat stiffer and tighter fitting (maybe a bit less shock absorbent?), but pretty much superior in every respect imo... It's still a soft case tho, you still stretch it around the EVO to fit it in and whatnot, and you could bend it if you wanted (only difference is it snaps back to it's original shape much quicker than silicon).
It seems to have more grip on your hand but it slides out of your pocket a lot easier, a LOT easier, and unlike silicon cases it attracts almost no dust and lint whatsoever! My HTC/OEM silicon case (bought at the Sprint store) attracted so much lint and crap in my pocket that within a day of cleaning it all up I'd have this crusty line of crap all around the edges, it was pretty irritating. None of that w/my TPU case, at all!
The TPU cases also feel a lot slimmer on your hand even tho they're not that much thinner than the silicon one, they're still thick enough so that the camera is recessed below it and fully protected (most of them are anyway, there's some thinner ones)... I guess part of the reason they feel more svelte is that the edges are more rounded off and not as squre-ish as the HTC silicon one.
Button press feel is also much better w/these, probably because of the tighter fit, they actually improve the handling of the power button if you ask me. The side edges of these cases don't move at all unless you pull on it tightly, totally different feel compared to the silicon ones which loosen up and from just swiping your finger across the screen you can end up stretching the edge out.
In short, they're just superior in every way, just get one and you'll thank me later. All you have to do is choose one of the different ones out there based on aesthetics...
Amzer sells one w/an Argyle pattern on the back, that's what I've got right now, it's available on Amazon and off Amzer's site for around the same price ($9-10), it's semi-translucent and the pattern is actually a lot more subdued and doesn't stand out nearly as much as you'd think from looking at the online pics. I actually like the pattern, if anything I'd say the shade of the skin isn't quite smoked/black, it has a slight hint of amber/brown...
That's the only thing that bothers me about it. I'm gonna be ordering a plain black one along w/a red one from DCMugen on Ebay, he's selling some made by Epik that look to be the exact same thing w/o the Argyle pattern, and they're cheaper to boot ($3.50, or $6.50 for two). I can get you a link if you can't find 'em... I think they have 'em in blue and clear and a few other colors too.
Just don't fall for the cheap off-brand Argyle ones on Ebay, you can tell them apart easily because unlike the two I've mentioned those have one large cutout for the camera/LED/speaker, whereas these other ones have individual cutouts and from what I've read they're a bit thicker. Those other Ebay ones also have a large silly cutout for the fingernail hole on the battery lid that you use to pry it off, seems like a goof on the mold/design.
If you don't care for the Argyle pattern on the Amzer one I'd get the Epik ones from DCMugen, I think the colors/tint on those are closer to the photos. Here's a link to the red one, you can click on the seller for the other colors and the package pricing for two or whatever.
If you're not into the translucent look of either of those TPU cases you can always grab the matte black one at www.evocases.net There's a thread for those right here at XDA where misticjeff has even thrown in a $1 code discount for XDA members. The sides/front are still glossy (perhaps a bit glossier than the translucent ones, judging by the photos), back's matte. The frost one is no longer available.
On the thread about those some people were complaining about the feel of the power button, seems it's not as great as the Amzer/Epik ones, some people resorted to sticking a lil' bit of tape in between to make it easier to press... One thing the evocases.net does have going for it is the slightly raised ring around the camera, which I guess might protect it more in the long run... Even tho they're all thick enough that the lens is recessed (as well as the screen obviously).
My 2 cents, hope it helps... I'm loving the feel of these TPU cases tho, I'll probably never get a silicon case for a phone again.
Whew, that second post got pretty long... A picture or two would've made it easier to explain I guess. Lemme know if you're interested in the Argyle one and I can grab my camera and post some pics of how it really looks, there doesn't seem to be many pictures out there of the actual case ON the phone (for either of them really).
I was gonna wait 'till I had the Epik ones so I could photograph them all side by side but I can take pics of the Amzer Argyle one in advance and post 'em up. Like I said, I actually dig the Argyle pattern because it's pretty subdued, it's more of an etch or a shade (it actually feels like an etch on the inside of the case), rather than a print. The only thing that bothers me about it is the overall shade/tint.
I probably wouldn't even be ordering the Epik one if I wasn't also ordering some of those clear battery doors that are about to go on sale... I think those plain Epik cases w/the clear battery door will look very slick.
Best buy might have what you are looking for. My only gripe is the buttons feel hard to push. But give it a shot (most BB will let you try on the case) it might be what you are looking for.
Seidio Innocase Active Cased - Limited Edition
After looking around the net for some time I bought the Seido Innocase Active Limited Edition.
Can't post a link but search Amazon for the title in my thread.
It's a semi-hard silicon cover with a siliconized hard plastic that exo-skeleton. Perfect combo in my opinion. My one complaint is that the edges on the hard plastic piece have the siliconized coating peeling off a little but I think I may have gotten a defective unit as I haven't seen anyone else complaining about it yet.
Also got the ClearTouch screen cover anti-glare version. I've had this cover on a few phones and it's also the best for reducing glare and fingerprints while maintaining clarity. Kinda hard to install without getting dust underneath but once you get it on right it looks and feels great. ClearTouch is sold by boxwave and is on Amazon.
Hybrid Flexi Skin Cover
Has anyone tried the Hybrid Flexi Skin cover from Daydeal.com? I'm also looking for a tighter case than my OEM silicone skin I got from Sprint. I just don't like the way the sides become flimsy and flaps off the phone when I swipe my screen. I'm looking at this case:
Hybrid Flexi Skin Cover for HTC EVO 4G, Honeycomb (Smoke & Clear)
Hybrid Flexi Skin Cover for HTC EVO 4G is a combination back cover consisting of a semi-hard, semi-soft Thermoplastic Polyurethane (TPU) edge with a smooth hard back.
* Protects the side edges and back of your EVO 4G
* Hybrid cover consisting of a semi-hard, semi-soft TPU edge and a smooth hard back
* Stylish glossy TPU edge provides shock-absorbing protection
* Lightweight TPU is resistant to taring, stretching and deforming
* Compatible with HTC EVO 4G
Sorry, I'm a newbie and can't post links, yet. I don't know if the TPU edges would solve the flapping problem, since it's supposed to be firmer & tighter. Any input would be appreciated. Thanks.
Hiway said:
Has anyone tried the Hybrid Flexi Skin cover from Daydeal.com? I'm also looking for a tighter case than my OEM silicone skin I got from Sprint. I just don't like the way the sides become flimsy and flaps off the phone when I swipe my screen. I'm looking at this case:
Hybrid Flexi Skin Cover for HTC EVO 4G, Honeycomb (Smoke & Clear)
Hybrid Flexi Skin Cover for HTC EVO 4G is a combination back cover consisting of a semi-hard, semi-soft Thermoplastic Polyurethane (TPU) edge with a smooth hard back.
...
Sorry, I'm a newbie and can't post links, yet. I don't know if the TPU edges would solve the flapping problem, since it's supposed to be firmer & tighter. Any input would be appreciated. Thanks.
Click to expand...
Click to collapse
As I said in my previous post, TPU rocks as a material for cases/skins... I don't blame ya for skipping right over it tho.
TPU >>>>>> silicon
TPU doesn't attract dust at all, it's much tighter/rigid so the side edges don't flop out at all, but it's still got plenty of give (so it'll absorb a fall/bump), you could bend 'em in half if you wanted... Only difference is it'll snap back into form in a second unlike silicon which will probably just bounce around in an arc.
TPU also seems just as grippy on your hand, if not more so, but it slides in and out of pockets way way easier, and most of the TPU cases I've seen feel way more svelte in the hand than the OEM/HTC silicon scene... Probably in part because they're a tad thinner, probably also because the edges are more rounded off and not as blocky. Physically I'm sure it isn't a huge difference, but it sure feels like it.
This thread has some further discussion on TPU cases, it's really hard to judge them based on pictures alone, I was very pleasantly surprised with mine.
So I tried googling the title you posted and came up with this, only place I could find it at. Looks pretty interesting, seems the back is hard plastic and the edges are TPU. If you dig that honeycomb pattern I'd say go for it...
Altho if it's actual plastic it might get scratched up over time Looks like it's also clear/translucent, clear plastic usually shows every single flaw... A plain TPU case wouldn't have that issue. I'm just not seeing the advantage over 100% TPU, which are also like $3.50 vs $14 (look for DCMugen's Epik/TPU cases on Ebay).
OTOH that red back + black edges on the video in the link I pasted before looks pretty sweet... The rest look kinda gaudy imo ('cept for the all black) but red/black looks really different, I like it.
P.S. This is the Honeycomb (Smoke & Red) combination I was alluding to... There's also Honeycomb (Smoke & Smoke) and plain Black & Smoke (no honeycomb pattern, solid black sides). The red is the most distinct imo, those are all probably better in the long run than the clear back (less forgiving).
Jayr00 said:
Kinda hard to install without getting dust underneath but once you get it on right it looks and feels great. ClearTouch is sold by boxwave and is on Amazon.
Click to expand...
Click to collapse
Tip for the next time you gotta install a screen protector and its the hard type: get some scotch tape, put it on the non adhesive side of the screen protector so you can peel it back without touching anything, and then grab another piece of tape and start taping the dust out of the screen or adhesive side of the protector and you'll be dust free in no time. Friends came over cuz they all needed new protectors and i did 4 phones in 20 minutes.
Hybrid Flexi Case
I got my new case today....went with the Smoke & Smoke combo. This case is awesome, I HIGHLY recommend it. the sides don't flap and it has a really tight fit and seems really durable. Got it off of EBay for about $8.50 ($4.50 for case + $4.00 shipping/handling) from Daydeal as opposed to going to their site and paying $13.99.
Impulses said:
P.S. This is the Honeycomb (Smoke & Red) combination I was alluding to... There's also Honeycomb (Smoke & Smoke) and plain Black & Smoke (no honeycomb pattern, solid black sides). The red is the most distinct imo, those are all probably better in the long run than the clear back (less forgiving).
Click to expand...
Click to collapse
I went with the smoke on smoke honeycomb case and got it today. It's darker so I think it'll hide any scratching that my occur on the backing. I agree with you on the clear backs when I first saw them, but the back seems scratch resistant (only time will tell)
Hiway said:
I got my new case today....went with the Smoke & Smoke combo. This case is awesome, I HIGHLY recommend it. the sides don't flap and it has a really tight fit and seems really durable. Got it off of EBay for about $8.50 ($4.50 for case + $4.00 shipping/handling) from Daydeal as opposed to going to their site and paying $13.99.
Click to expand...
Click to collapse
If possible can you please post pics? Im interested in this case but have only seen Daydeal's review on it.
Saw this over on the Case-Mate site:
https://www.case-mate.com/HTC-EVO-4G-Cases/Case-Mate-HTC-EVO-4G-Gelli-Cases.asp
I have the dark smoke Epik TPU case, but ordered the Tomato one for a splash of color.
Are they the rubbery feel that makes it hard to take out of a front jean pocket?
Let us know how this case is compare to the TPU case. I like tight fitting aspect of the TPU case but hate how the side/power button is too hard to press.
These ARE tpu
If you look carefully (also states in the description) there is a pattern on these. Sigh. It is triangles. I don't care for the pattern personally. I just did not want to see someone buy one without noticing this first.
I got mine yesterday and like it alot. It's much more refined and better looking than the Epik case. There are no rough edges or bulge near the volume rocker like on the Epik case, and the finish has a translucent quality to it. The case is also slightly thinner than the Epik case and feels much better in the hand.
At first I was going to return the case because it appears that the camera lens is almost flush with the edge of the case, so I thought there was inadequate protection for the camera. However, I noticed that when you place the case on a flat surface, the back is actually tapered so that the bottom half of the phone is level with the surface, but raises up slightly towards the camera lens. There is a good 1-2 millimeter clearance between the surface and the camera lens. The phone is completely level though and you can't tell unless you are looking at it sideways. Quite brilliant!
The only downsides are the volume buttons are harder to hit than on the Epik case, and the glossy skin is a little bit more slippery than the Epik case. The Epik feels more "grippy". It also came with a screen protector which is about average at best. Anyways, feel free if you have any questions.
Oh and the pattern is actually circles, not triangles.
I just got this case from eBay for around $5 USD and I am so impressed with it I had to write a quick review. I think the name brand is Fusion.
-The fit of the case is just perfect. Very snug.
-The thickness is just enough to protect the camera lens and screen without adding much bulk.
-The sides of the case have a nice texture to make it very easy to grip.
-The TPU material doesn't attract lint and is very easy to slide in and out of your pocket.
-All of the holes match up fine.
-The buttons on the sides of the phone are covered but in my opinion this makes the pressure required just right so you don't accidentally press them.
The only negative at all is that the hole for the headphone jack may be too small for some plugs. The Samsung headphones and my Bose headphones fit just fine though. (Update: My Bose speakers I had to trim a little plastic off of the audio cable but it fits fine now.)
Here is the eBay link if anybody wants one. This guy shipped one to me in 2 days in the US.
http://cgi.ebay.com/Clear-Fusion-Samsung-Galaxy-S2-i9100-TPU-COVER-CASE-/260780906673?pt=PDA_Accessories&hash=item3cb7c0d8b1
If you're willing to wait a few days more, you can get them for 2,5$ in Dealextreme.
I have exactly the same one, purchased for £2.95 off ebay in the UK, and I would agree with all the points outlined above.
bought two of them from Dealextreme, but in black color, best TPU
Do they make them in matte black?
I ordered a similar one from eBay on the 14th, and it arrived today. Fits pretty well and leaves a bit of a bumper around the display, adding a bit of protection.
bmstrong said:
Do they make them in matte black?
Click to expand...
Click to collapse
I believe I saw a matte black on Dealextreme. Most of the black ones I've seen are part matte, part glossy.
http://www.amazon.co.uk/SAMSUNG-GALAXY-SCREEN-PROTECTOR-ACCESSORIES/dp/B004WO6ISI/ref=sr_1_23?s=electronics&ie=UTF8&qid=1306245039&sr=1-23
The thickness is just enough to protect the camera lens and screen without adding much bulk.
Click to expand...
Click to collapse
Hard to tell from the image, but isnt that simply a hole in the case where they camera lense is, so offers no protection for the lens at all??
Its an impossible task trying to find a case that offers protection for the camera.. they are so hi spec and good quality these days, the last thing you want is muck or scratches on the optics.. surely a case designer can be innovative enough to design some sort of sliding cover....
I purchased the Black one as well. However, the glossy part scratches too easily. Handle with care.
Well i've both the TPU case (but it's all black) and the Samsung case:
http://www.happybirthdaytoyou.com/bmcdigital/SS-I9100-VENT-BLK-1.jpg
I've tryed both, and i really prefer the samsung one, the tpu case attracts way too much dust, while the samsung case it's a lot easier to clean. The dust on the tpu case pile up on the sides, and from there it's a hell to remove it.
Artius89 said:
Well i've both the TPU case (but it's all black) and the Samsung case:
http://www.happybirthdaytoyou.com/bmcdigital/SS-I9100-VENT-BLK-1.jpg
I've tryed both, and i really prefer the samsung one, the tpu case attracts way too much dust, while the samsung case it's a lot easier to clean. The dust on the tpu case pile up on the sides, and from there it's a hell to remove it.
Click to expand...
Click to collapse
It's true, that was my experience with this TPU case as well. Dust would pile up on the edges of the screen and under the TPU lining. I'd have to constantly take off the TPU case and wipe the screen to keep my SGS2 nice and pretty. With the official Samsung vent case i can simply wipe the screen clean in one go without taking off the case. Sure, the official case offers less protection, but it also preserves the form and weight of the phone quite well, whereas the TPU case adds significant weight and thickness to the phone in comparison.
I just got a few of these delivered from buyaccess. Delivered in a week and they fit like a glove. Nice ridge around the screen so it won't scratch if you put it face down and extra grip on the sides.
€2 each and free shipping you cannot go wrong. Link to the sellar if anybody wants it.
http://myworld.ebay.ie/buyaccess/?_trksid=p4340.l2559
i am using nillkin tpu case ，absolutely good awesome。I was driving motorbike in raining day.made my hand wet and glutinous 。then using my phone，that is feeling good。not like some case make your hand oily
http://www.ebay.co.uk/itm/150635443...43813&_sacat=See-All-Categories&_fvi=1&_rdc=1
I just want to share my experince from two different but similar cases for the HTC One.
This is what I was looking for
Cover to prevent scratches in metal/color
As little annoying as possible
Elegancy
A lid to cover screen while inside my pocket
So I ordered two different kinds and colors.
The first one to arrive
Poetic FlipBook Case for HTC One M7 White
Price: £16.95 (sale, normal £29.95)
From: Amazon (LINK)
The second to arrive
Ultra Slim PU Leather Flip Case Hybrid Translucent Plastic Cover for HTC One M7 ES-K (M7-ES-K)
Price: US$6.49
From: Spider-Foot.com (LINK)
I've been using the white Potetic FlipBook for about 2 weeks now and can say it's really neat and quite good to hold it in my hand. The backside has a hard plastic material with a little touch of rubber, but its still hard. This rubbery surface gives it a good grip and you can tell the quality of the plastic is great. Its not that hard kind of plastic that easily cracks.
The downside is it easily gets a bit dirty from daily use because of the surface material, and the bottom edge of the lid has gotten a bit soft and "flaggy", but not much.
Im happy with the lid because it's quite heavy and therefore closes easily with a small clunk. It also covers like 1 mm outside the screen and therefore it becomes easy to flip it open with your thumb.
Now, the other one. It's black or a dark tone of grey, which suits my black HTC One.
This case arrived today and after the first fitting i could really feel the cheaper quality of the plastic. It's bendable but on a longterm this will not hold as long as the Poetic's plastic. It also covers all the frame sides of the phone whilst the Poetic case only covered the corners. The framing makes it also a bit difficult to use the volume control, the buttons becomes a bit submerged.
The lid has a really nice microfiber surface which makes the screen clean from spotts. And it has an opening for the speaker that lets you hear when the lid is closed during a call. On the downside, the lid is a bit loose and therefore it doesnt cover all the way across the screen. It kind of slides back because the attachment is a bit stiff, and it doesnt want to close completely by its own weight. But that can maybe loosen up after being used for a while.
My favourite
Poetic FlipBook Case for HTC One M7 White
It's quite expensive but really worth it considering I will use it everyday for a long time.
You can also get it in different colors.
But if you don't want to spend so much and the casing is just for protection rather than look and feeling, you should go for the second one. It's more luxurious than other cheap cases.
Pictures
Imageschack album
LINK
Hi, few days ago I was happy Z3c owner. Phone is great but it's one of the most fragile phones on market so I'm looking for a case.
I bough Ringke Fusion but seems also not so protective comparing to cases I had before for older phones like Ballistic or Trident.
So, if You would like to help me choose right. Except one I have (Ringke) I found Cruzerlite - looks nice cause on left side only magnetic port is opened so not so many weak spots but it also like Ringke seems like tuned regular TPU for 2$.
Case Mate from Z1c after adding few cutouts looks promising and people are saying it's best protection case. I also found Incipio Dual Layer case but I heard that rubber part is stretching and I hate it when it does.
There are many other cases on eBay for 2-10$ but I would like not to buy another case like this Ringke which is not best choice for me for it's price.
Cruzerlite Bugdroid.
Bought 14 months ago. Great cover
I use the Case-Mate Barely There clear plastic case (edit: for the z3c, not the modified z1c in the poll). It's hard plastic, not TPU, but I like it because it has a very slim profile.
Thank You, but unlike all I prefer something more "bulky". I used that my phone can hit on the street when I'm running and get out of this without a scratch. Pity that there is no such case for Z3c.
Hama Crystal Case for Z3C, fits perfect(without plastic adapters)
This thread should include the Devilcase. It can take hits to concrete, leaves the USB flap and magnetic port exposed, and adds minimal bulk.
I never saw any crash tests with Devilcase but I don't think those tiny parts of foam or sponge between phone and bumper can absorb damage.
I know it looks great but without it phone also looks great and I think with and without this case screen is as well exposed as without it. If I depend only on scratch protection I would take any 0.3mm transparent case.
Anyway thank You for mention.
The sides of the bumper come up about 2mm,so that with a glass screen protector (that you should get no matter which case you buy) there is still about 1mm separating the protector from the offending surface.
And like I said, I've dropped it multiple times onto concrete to absolutely 0 ill effect. It's not like other slim cases, aluminum behaves much differently than silicone.
I'm working in a repair service center and I saw many iPhones after they hit the ground in a alu bumper and they looks same as phones without any protection. Thats why I conclude that all hard cases and bumpers acts the same in contact with the floor.
Of course I'm using tempered glass but it can help in case of direct impact on the screen but it wont help with pressure formed from the side impact.
Still I'd go for something more flexible cause I'd rather not to test aluminum shock absorption.
I think if I wont find anything decent I will order Cruzerlite and after comparing it with Ringke I'll stay with better one.
It sad there is no really rugged case for Z3c.
You can laugh but after reading some reviews I ordered Devilcase.
I didn't want to argue with you, as we had contradictory personal experience. I won't laugh, you made a good choice.
I once had the original Sony case.
Plus: The magnet that opens the screen when opening the case
Minus: The window that is positioned in a different place than the clock widget. One cannot change the position of this clock widget on the lock screen.
Minus: The book-wise opening which makes the front flap being a hindrance for easy handling
Now I bought a cheap one, opening from the top side:
Plus: Easy handling
Plus: Self installed magnet in the flap for automagic opening of the screen when opening the flap.
Plus: Good protection
I have some pictures.
The Sony Cover pictures are taken with original locked phone.
The other pictures with unlocked Marshmallow and destroyed DRM keyes.
It's easy to see the bad picture quality after unlocking. :crying: :crying:
The best by far is the Case-Mate Tough for the Z3 Compact.
It's dual layered with an inner rubber layer and a solid plastic outer layer.
It has cut outs so you can use it with the official Dock DK48 and leaves the usb and sd card flap accessible.
http://www.case-mate.com/products/black-sony-xperia-z3-compact-tough-case
Do You have or tested one??
I have one and it's awesome. Good grip too.
I skipped this one cause most reviews I found was negative. Mostly because like half of the phone is unprotected.
Only a portion of one side is uncovered, all the corners are protected and even if you dropped it sideways the case sticks out.so the phone isn't touched. Try it out you will see how tough it feels.
Make no mistake, the phone is very safe.
devilcase all the way
I dropped my Z3c several times already, sometimes on a pavement. not even a scratch on the phone itself, Barely There protects it really well.