I'm curious if there is a stiffer/stronger silicone case out there. I had a hard silicone case for my ipod touch and miss it. The htc silicone case is just to flimsy and I'm not wanting a hard case never had any luck with them
Sent from my EVO using Tapatalk
What you want is a TPU case. It's a different material than silicon, somewhat stiffer and tighter fitting (maybe a bit less shock absorbent?), but pretty much superior in every respect imo... It's still a soft case tho, you still stretch it around the EVO to fit it in and whatnot, and you could bend it if you wanted (only difference is it snaps back to it's original shape much quicker than silicon).
It seems to have more grip on your hand but it slides out of your pocket a lot easier, a LOT easier, and unlike silicon cases it attracts almost no dust and lint whatsoever! My HTC/OEM silicon case (bought at the Sprint store) attracted so much lint and crap in my pocket that within a day of cleaning it all up I'd have this crusty line of crap all around the edges, it was pretty irritating. None of that w/my TPU case, at all!
The TPU cases also feel a lot slimmer on your hand even tho they're not that much thinner than the silicon one, they're still thick enough so that the camera is recessed below it and fully protected (most of them are anyway, there's some thinner ones)... I guess part of the reason they feel more svelte is that the edges are more rounded off and not as squre-ish as the HTC silicon one.
Button press feel is also much better w/these, probably because of the tighter fit, they actually improve the handling of the power button if you ask me. The side edges of these cases don't move at all unless you pull on it tightly, totally different feel compared to the silicon ones which loosen up and from just swiping your finger across the screen you can end up stretching the edge out.
In short, they're just superior in every way, just get one and you'll thank me later. All you have to do is choose one of the different ones out there based on aesthetics...
Amzer sells one w/an Argyle pattern on the back, that's what I've got right now, it's available on Amazon and off Amzer's site for around the same price ($9-10), it's semi-translucent and the pattern is actually a lot more subdued and doesn't stand out nearly as much as you'd think from looking at the online pics. I actually like the pattern, if anything I'd say the shade of the skin isn't quite smoked/black, it has a slight hint of amber/brown...
That's the only thing that bothers me about it. I'm gonna be ordering a plain black one along w/a red one from DCMugen on Ebay, he's selling some made by Epik that look to be the exact same thing w/o the Argyle pattern, and they're cheaper to boot ($3.50, or $6.50 for two). I can get you a link if you can't find 'em... I think they have 'em in blue and clear and a few other colors too.
Just don't fall for the cheap off-brand Argyle ones on Ebay, you can tell them apart easily because unlike the two I've mentioned those have one large cutout for the camera/LED/speaker, whereas these other ones have individual cutouts and from what I've read they're a bit thicker. Those other Ebay ones also have a large silly cutout for the fingernail hole on the battery lid that you use to pry it off, seems like a goof on the mold/design.
If you don't care for the Argyle pattern on the Amzer one I'd get the Epik ones from DCMugen, I think the colors/tint on those are closer to the photos. Here's a link to the red one, you can click on the seller for the other colors and the package pricing for two or whatever.
If you're not into the translucent look of either of those TPU cases you can always grab the matte black one at www.evocases.net There's a thread for those right here at XDA where misticjeff has even thrown in a $1 code discount for XDA members. The sides/front are still glossy (perhaps a bit glossier than the translucent ones, judging by the photos), back's matte. The frost one is no longer available.
On the thread about those some people were complaining about the feel of the power button, seems it's not as great as the Amzer/Epik ones, some people resorted to sticking a lil' bit of tape in between to make it easier to press... One thing the evocases.net does have going for it is the slightly raised ring around the camera, which I guess might protect it more in the long run... Even tho they're all thick enough that the lens is recessed (as well as the screen obviously).
My 2 cents, hope it helps... I'm loving the feel of these TPU cases tho, I'll probably never get a silicon case for a phone again.
Whew, that second post got pretty long... A picture or two would've made it easier to explain I guess. Lemme know if you're interested in the Argyle one and I can grab my camera and post some pics of how it really looks, there doesn't seem to be many pictures out there of the actual case ON the phone (for either of them really).
I was gonna wait 'till I had the Epik ones so I could photograph them all side by side but I can take pics of the Amzer Argyle one in advance and post 'em up. Like I said, I actually dig the Argyle pattern because it's pretty subdued, it's more of an etch or a shade (it actually feels like an etch on the inside of the case), rather than a print. The only thing that bothers me about it is the overall shade/tint.
I probably wouldn't even be ordering the Epik one if I wasn't also ordering some of those clear battery doors that are about to go on sale... I think those plain Epik cases w/the clear battery door will look very slick.
Best buy might have what you are looking for. My only gripe is the buttons feel hard to push. But give it a shot (most BB will let you try on the case) it might be what you are looking for.
Seidio Innocase Active Cased - Limited Edition
After looking around the net for some time I bought the Seido Innocase Active Limited Edition.
Can't post a link but search Amazon for the title in my thread.
It's a semi-hard silicon cover with a siliconized hard plastic that exo-skeleton. Perfect combo in my opinion. My one complaint is that the edges on the hard plastic piece have the siliconized coating peeling off a little but I think I may have gotten a defective unit as I haven't seen anyone else complaining about it yet.
Also got the ClearTouch screen cover anti-glare version. I've had this cover on a few phones and it's also the best for reducing glare and fingerprints while maintaining clarity. Kinda hard to install without getting dust underneath but once you get it on right it looks and feels great. ClearTouch is sold by boxwave and is on Amazon.
Hybrid Flexi Skin Cover
Has anyone tried the Hybrid Flexi Skin cover from Daydeal.com? I'm also looking for a tighter case than my OEM silicone skin I got from Sprint. I just don't like the way the sides become flimsy and flaps off the phone when I swipe my screen. I'm looking at this case:
Hybrid Flexi Skin Cover for HTC EVO 4G, Honeycomb (Smoke & Clear)
Hybrid Flexi Skin Cover for HTC EVO 4G is a combination back cover consisting of a semi-hard, semi-soft Thermoplastic Polyurethane (TPU) edge with a smooth hard back.
* Protects the side edges and back of your EVO 4G
* Hybrid cover consisting of a semi-hard, semi-soft TPU edge and a smooth hard back
* Stylish glossy TPU edge provides shock-absorbing protection
* Lightweight TPU is resistant to taring, stretching and deforming
* Compatible with HTC EVO 4G
Sorry, I'm a newbie and can't post links, yet. I don't know if the TPU edges would solve the flapping problem, since it's supposed to be firmer & tighter. Any input would be appreciated. Thanks.
Hiway said:
Has anyone tried the Hybrid Flexi Skin cover from Daydeal.com? I'm also looking for a tighter case than my OEM silicone skin I got from Sprint. I just don't like the way the sides become flimsy and flaps off the phone when I swipe my screen. I'm looking at this case:
Hybrid Flexi Skin Cover for HTC EVO 4G, Honeycomb (Smoke & Clear)
Hybrid Flexi Skin Cover for HTC EVO 4G is a combination back cover consisting of a semi-hard, semi-soft Thermoplastic Polyurethane (TPU) edge with a smooth hard back.
...
Sorry, I'm a newbie and can't post links, yet. I don't know if the TPU edges would solve the flapping problem, since it's supposed to be firmer & tighter. Any input would be appreciated. Thanks.
Click to expand...
Click to collapse
As I said in my previous post, TPU rocks as a material for cases/skins... I don't blame ya for skipping right over it tho.
TPU >>>>>> silicon
TPU doesn't attract dust at all, it's much tighter/rigid so the side edges don't flop out at all, but it's still got plenty of give (so it'll absorb a fall/bump), you could bend 'em in half if you wanted... Only difference is it'll snap back into form in a second unlike silicon which will probably just bounce around in an arc.
TPU also seems just as grippy on your hand, if not more so, but it slides in and out of pockets way way easier, and most of the TPU cases I've seen feel way more svelte in the hand than the OEM/HTC silicon scene... Probably in part because they're a tad thinner, probably also because the edges are more rounded off and not as blocky. Physically I'm sure it isn't a huge difference, but it sure feels like it.
This thread has some further discussion on TPU cases, it's really hard to judge them based on pictures alone, I was very pleasantly surprised with mine.
So I tried googling the title you posted and came up with this, only place I could find it at. Looks pretty interesting, seems the back is hard plastic and the edges are TPU. If you dig that honeycomb pattern I'd say go for it...
Altho if it's actual plastic it might get scratched up over time Looks like it's also clear/translucent, clear plastic usually shows every single flaw... A plain TPU case wouldn't have that issue. I'm just not seeing the advantage over 100% TPU, which are also like $3.50 vs $14 (look for DCMugen's Epik/TPU cases on Ebay).
OTOH that red back + black edges on the video in the link I pasted before looks pretty sweet... The rest look kinda gaudy imo ('cept for the all black) but red/black looks really different, I like it.
P.S. This is the Honeycomb (Smoke & Red) combination I was alluding to... There's also Honeycomb (Smoke & Smoke) and plain Black & Smoke (no honeycomb pattern, solid black sides). The red is the most distinct imo, those are all probably better in the long run than the clear back (less forgiving).
Jayr00 said:
Kinda hard to install without getting dust underneath but once you get it on right it looks and feels great. ClearTouch is sold by boxwave and is on Amazon.
Click to expand...
Click to collapse
Tip for the next time you gotta install a screen protector and its the hard type: get some scotch tape, put it on the non adhesive side of the screen protector so you can peel it back without touching anything, and then grab another piece of tape and start taping the dust out of the screen or adhesive side of the protector and you'll be dust free in no time. Friends came over cuz they all needed new protectors and i did 4 phones in 20 minutes.
Hybrid Flexi Case
I got my new case today....went with the Smoke & Smoke combo. This case is awesome, I HIGHLY recommend it. the sides don't flap and it has a really tight fit and seems really durable. Got it off of EBay for about $8.50 ($4.50 for case + $4.00 shipping/handling) from Daydeal as opposed to going to their site and paying $13.99.
Impulses said:
P.S. This is the Honeycomb (Smoke & Red) combination I was alluding to... There's also Honeycomb (Smoke & Smoke) and plain Black & Smoke (no honeycomb pattern, solid black sides). The red is the most distinct imo, those are all probably better in the long run than the clear back (less forgiving).
Click to expand...
Click to collapse
I went with the smoke on smoke honeycomb case and got it today. It's darker so I think it'll hide any scratching that my occur on the backing. I agree with you on the clear backs when I first saw them, but the back seems scratch resistant (only time will tell)
Hiway said:
I got my new case today....went with the Smoke & Smoke combo. This case is awesome, I HIGHLY recommend it. the sides don't flap and it has a really tight fit and seems really durable. Got it off of EBay for about $8.50 ($4.50 for case + $4.00 shipping/handling) from Daydeal as opposed to going to their site and paying $13.99.
Click to expand...
Click to collapse
If possible can you please post pics? Im interested in this case but have only seen Daydeal's review on it.
Related
Saw this over on the Case-Mate site:
https://www.case-mate.com/HTC-EVO-4G-Cases/Case-Mate-HTC-EVO-4G-Gelli-Cases.asp
I have the dark smoke Epik TPU case, but ordered the Tomato one for a splash of color.
Are they the rubbery feel that makes it hard to take out of a front jean pocket?
Let us know how this case is compare to the TPU case. I like tight fitting aspect of the TPU case but hate how the side/power button is too hard to press.
These ARE tpu
If you look carefully (also states in the description) there is a pattern on these. Sigh. It is triangles. I don't care for the pattern personally. I just did not want to see someone buy one without noticing this first.
I got mine yesterday and like it alot. It's much more refined and better looking than the Epik case. There are no rough edges or bulge near the volume rocker like on the Epik case, and the finish has a translucent quality to it. The case is also slightly thinner than the Epik case and feels much better in the hand.
At first I was going to return the case because it appears that the camera lens is almost flush with the edge of the case, so I thought there was inadequate protection for the camera. However, I noticed that when you place the case on a flat surface, the back is actually tapered so that the bottom half of the phone is level with the surface, but raises up slightly towards the camera lens. There is a good 1-2 millimeter clearance between the surface and the camera lens. The phone is completely level though and you can't tell unless you are looking at it sideways. Quite brilliant!
The only downsides are the volume buttons are harder to hit than on the Epik case, and the glossy skin is a little bit more slippery than the Epik case. The Epik feels more "grippy". It also came with a screen protector which is about average at best. Anyways, feel free if you have any questions.
Oh and the pattern is actually circles, not triangles.
I just got this case from eBay for around $5 USD and I am so impressed with it I had to write a quick review. I think the name brand is Fusion.
-The fit of the case is just perfect. Very snug.
-The thickness is just enough to protect the camera lens and screen without adding much bulk.
-The sides of the case have a nice texture to make it very easy to grip.
-The TPU material doesn't attract lint and is very easy to slide in and out of your pocket.
-All of the holes match up fine.
-The buttons on the sides of the phone are covered but in my opinion this makes the pressure required just right so you don't accidentally press them.
The only negative at all is that the hole for the headphone jack may be too small for some plugs. The Samsung headphones and my Bose headphones fit just fine though. (Update: My Bose speakers I had to trim a little plastic off of the audio cable but it fits fine now.)
Here is the eBay link if anybody wants one. This guy shipped one to me in 2 days in the US.
http://cgi.ebay.com/Clear-Fusion-Samsung-Galaxy-S2-i9100-TPU-COVER-CASE-/260780906673?pt=PDA_Accessories&hash=item3cb7c0d8b1
If you're willing to wait a few days more, you can get them for 2,5$ in Dealextreme.
I have exactly the same one, purchased for £2.95 off ebay in the UK, and I would agree with all the points outlined above.
bought two of them from Dealextreme, but in black color, best TPU
Do they make them in matte black?
I ordered a similar one from eBay on the 14th, and it arrived today. Fits pretty well and leaves a bit of a bumper around the display, adding a bit of protection.
bmstrong said:
Do they make them in matte black?
Click to expand...
Click to collapse
I believe I saw a matte black on Dealextreme. Most of the black ones I've seen are part matte, part glossy.
http://www.amazon.co.uk/SAMSUNG-GALAXY-SCREEN-PROTECTOR-ACCESSORIES/dp/B004WO6ISI/ref=sr_1_23?s=electronics&ie=UTF8&qid=1306245039&sr=1-23
The thickness is just enough to protect the camera lens and screen without adding much bulk.
Click to expand...
Click to collapse
Hard to tell from the image, but isnt that simply a hole in the case where they camera lense is, so offers no protection for the lens at all??
Its an impossible task trying to find a case that offers protection for the camera.. they are so hi spec and good quality these days, the last thing you want is muck or scratches on the optics.. surely a case designer can be innovative enough to design some sort of sliding cover....
I purchased the Black one as well. However, the glossy part scratches too easily. Handle with care.
Well i've both the TPU case (but it's all black) and the Samsung case:
http://www.happybirthdaytoyou.com/bmcdigital/SS-I9100-VENT-BLK-1.jpg
I've tryed both, and i really prefer the samsung one, the tpu case attracts way too much dust, while the samsung case it's a lot easier to clean. The dust on the tpu case pile up on the sides, and from there it's a hell to remove it.
Artius89 said:
Well i've both the TPU case (but it's all black) and the Samsung case:
http://www.happybirthdaytoyou.com/bmcdigital/SS-I9100-VENT-BLK-1.jpg
I've tryed both, and i really prefer the samsung one, the tpu case attracts way too much dust, while the samsung case it's a lot easier to clean. The dust on the tpu case pile up on the sides, and from there it's a hell to remove it.
Click to expand...
Click to collapse
It's true, that was my experience with this TPU case as well. Dust would pile up on the edges of the screen and under the TPU lining. I'd have to constantly take off the TPU case and wipe the screen to keep my SGS2 nice and pretty. With the official Samsung vent case i can simply wipe the screen clean in one go without taking off the case. Sure, the official case offers less protection, but it also preserves the form and weight of the phone quite well, whereas the TPU case adds significant weight and thickness to the phone in comparison.
I just got a few of these delivered from buyaccess. Delivered in a week and they fit like a glove. Nice ridge around the screen so it won't scratch if you put it face down and extra grip on the sides.
€2 each and free shipping you cannot go wrong. Link to the sellar if anybody wants it.
http://myworld.ebay.ie/buyaccess/?_trksid=p4340.l2559
i am using nillkin tpu case ，absolutely good awesome。I was driving motorbike in raining day.made my hand wet and glutinous 。then using my phone，that is feeling good。not like some case make your hand oily
http://www.ebay.co.uk/itm/150635443...43813&_sacat=See-All-Categories&_fvi=1&_rdc=1
Hi,
I just bought a SGS2 and I´m looking for good protection for it. I have a the top Ottercase case for my Atrix but it´s super bulky and it bothers me in my jeans pocket after sometime. What good, similar, thiner alternatives do I have? I really like the fact that the Otter cases use a non adherisive screen cover though.
Thoughts?
thanks
Rafa
rawfa said:
Hi,
I just bought a SGS2 and I´m looking for good protection for it. I have a the top Ottercase case for my Atrix but it´s super bulky and it bothers me in my jeans pocket after sometime. What good, similar, thiner alternatives do I have? I really like the fact that the Otter cases use a non adherisive screen cover though.
Thoughts?
thanks
Rafa
Click to expand...
Click to collapse
Are you aware of the magical search button?
http://forum.xda-developers.com/showthread.php?t=1125615
You should actualy read what is written before posting sarcastic comments. I´m asking for ALTERNATIVES to the Otter cases.
I've got a case-mate pop!case. It adds a little bulk, but I actually kind of like the new dimensions of the phone. It's got a hard outer shell with a rubberized inner shell and sides. We have a member who did a pretty good review of it here:
http://www.youtube.com/watch?v=41Ry0Lnhva4
Casemate Pop is a great case, better than the Casemate tough imo.
Otterbox Commuter series (not the super bulky version) has just been released too.
Thanks, guys. The casemate pop cases look really cool with the little colapsible stand. Does it also have a no adhesive protection for the screen? It´s also pricier than the Otter.
rawfa said:
Thanks, guys. The casemate pop cases look really cool with the little colapsible stand. Does it also have a no adhesive protection for the screen? It´s also pricier than the Otter.
Click to expand...
Click to collapse
it doesn't come with a screen protector film of any kind, but the edges of the case are slightly raised to protect the screen from making contact with a surface when laid flat.
Screen protectors can be bought separately, letting you customize exactly what kind you want, from a cheapie static flim, all the way up to a $30 sgp glas cover.
Thanks for the link to the review, didn't know the Pop existed.
I have the Tough case and I'm not so sure the Pop is a batter case.
The Tough has hard left and right sides and soft top and botton, the Pop is the reverse. If you spend most of your time holding the phone in portrait view you would want harder sides. The harder sides also means less dust gets in under the case.
The tough also has a proper cut out around the head phone port, If you have an angled jack on your headphones it won't fit the Pop.
The Pop is also deeper than the Tough, i.e. the Pop is the same depth all over the back, the Tough has the lip just the phone back.
However, the Pop does seem easier to take on/off and it's not black which is a plus.
Mujja said:
Thanks for the link to the review, didn't know the Pop existed.
I have the Tough case and I'm not so sure the Pop is a batter case.
The Tough has hard left and right sides and soft top and botton, the Pop is the reverse. If you spend most of your time holding the phone in portrait view you would want harder sides. The harder sides also means less dust gets in under the case.
The tough also has a proper cut out around the head phone port, If you have an angled jack on your headphones it won't fit the Pop.
The Pop is also deeper than the Tough, i.e. the Pop is the same depth all over the back, the Tough has the lip just the phone back.
However, the Pop does seem easier to take on/off and it's not black which is a plus.
Click to expand...
Click to collapse
True story about the angled headphone jacks.
As far as the portrait view, the soft rubber sides make it easier to grip. I prefer them that way.
Not sure about the dust yet, I've only had the case a few days.
I´ve just saw that the galaxy I bought actually comes with a barely there casemate. I guess I´ll look for a protective film for the screen now...I had the invisible shield for a while on my regular galaxy s but I found it stuck too much to your fingers...I was thinking of maybe getting one of those bestskinever films.
leftovermagic said:
Not sure about the dust yet, I've only had the case a few days.
Click to expand...
Click to collapse
Make sure you take it out and give it a clean at least once a week. Dust and grime builds up just under the edges with all cases and the SGS2's shiny bezel could get stained, just the the iPhone 3s.
Are there any slim cases (hard of course) that also cover the top? I have the Pop case and I love it, but I also want a slim case that isn't TPU or silicone. I have the Ringke Rearth cases, too, and they're fantastic. But i'd simply like a hard case, too. Any ideas?
Im ordering one like you mean both soft & hard case with full protection, directly from korean not sgp which not included the top area
sent from my 2.3.3|dxjpe DJGTabs7
Hi all, I am looking for a new case for my Vibrant. I currently have the "Officially the best Case.." but unfortunatelly it is falling apart after a good 1+ year run. Now I am looking to replace it with the same one or with something better (have not been keeping up)
Looking at the "Officially the best case.." I do not see any current links for it. And I have to say that I am limited to purchasing a case from ebay and worldwide shipping. Can you guys recommend something?
I would recommend any type of TPU case. I have one, and it has lasted me 1+ years. Absorbs shocks well and is relatively thin. There are a bunch on eBay.
I am looking at some black TPU cases, but on the poor images they put, I cannot see if there are buttons, cut out buttons on the actual case.. For example this one:
http://www.ebay.com/itm/Black-New-T...ccessories&hash=item20bdf50ab6#ht_2636wt_1392
I do not see power and volume buttons on the side..
From what I know, I doubt that any will have cut out buttons. But you could make the holes yourself.
Ya, ok, not cut out buttons, but at least take the shape of the buttons...so you can distinguish them where hey are by touching the phone..
The cases will have protruding buttons for the places where the buttons are located. I hope you get a good case.
You should get the otterbox. I've had mine since it came out and it still looks like new. Dropped it a couple of times and you'd never know to look at it. I'm sure that you can find it on ebay.
I just got the Trident Aegis case. It looks nice and provides good protection (silicone + hard plastic). The buttons are also easier to press than before.
However, the thing is a dust magnet (what kind of silicone isn't?), so I'd recommend keeping it out of dirty pockets as much as possible. It's also not cheap ($25 on Amazon), but is worth it IMO.
I also bought a Mercury jelly case off eBay today, so that's a cheaper option.
3D0
The 3D0 case seems to be pretty good. I just wish it covered the entire back like the model for the SGS II does.
casemate hard case and screen protector keep my phone mint, and very thin. Was $35 and I have a picture from my wedding on the back that i constantly get comments about. Had it a year and hardly shows scratches.
I'm returning my Trident Aegis. The plastic started chipping off and I wasn't really a fan of the dust it attracted.
I'm using the Seidio innocase now. Seems kind of flimsy, but is a lot lighter and thinner than the Aegis.
Get a TPU. It protects from scratches and dropping quite well, I'm reluctant to buy any other kind of case. I haven't seen any TPU cases with the buttons cut out. They're one piece units that are hard to rip, tear and really damage in any way. And all the functions of the phone are still easily accessible. The buttons may feel a little hard to press at firsts, but you get used to it. I bought one like this:
http://www.ebay.com/itm/TPU-Silicon...576411?pt=PDA_Accessories&hash=item3371ccc19b
Trident Cyclops here. Available on ebay starting at $17.50 shipped and it is a tank. I did remove the built in screen protector as it annoyed the crap out of me. Gorilla glass is awesome and as far as I am concerned I do not need a screen protector.
My only gripe is getting it into and out of my pockets the silicone does tend to grab the cloth.
I have the Otterbox and would highly recommend it. It has good shock protection with an outer layer to prevent scratching. The silicone layer does attract lint but good luck finding one that won't!
As I understand it, the silicone cases are more environmentally friendly than the TPU. I've been using silicone, rotating through 6 colors (liturgical) seasonally, and have dropped my phone more times than I can count. It just bounces. Not a scratch to be seen, and given the softness of the silicone, it does a better job than most non-water resistant cases at keeping things dry. And, like Martha Stewart's silpats and silicone lubricant, nothing, but nothing sticks to it. Yes, it's a bit rubbery, but I can put it in the back pocket of some jeans I probably should finally put in the skinny-pants bin as easily as without the case. That's pure silicone, which isn't TPU. TPU is pretty plastic-y, rather than rubbery, usually, but it depends on what other, er, crap you put in it. I think the folks selling it don't care what kind of plasticized, probably-a-little-toxic material their selling, they just want to move them.
What I like most about it, though, is that it stays on when I want it to, but I can pop it off in .75 sec. OK, then there's the price...
Thansks for the info. I need back case asap. This thread helped.
i hope im not too late into recommendations but a silicon case should be the best choice, the vibrant is an extremely tough phone and hard cases would be almost a waste( plus the overall thickness will increase greatly)...
My case is a hard case and is very thin, the silicone case is good unless you carry your phone in your pocket. Then you get to experience lint and your pocket turning inside out whenever you need your phone . I recommend casemate hard cases, you can customize them.
Sent from my SGH-T959 using XDA App
I'm a new Axon 7 owner and am currently searching for a case to use on this phone. The stock transparent case that comes with the phone is great but due to the fact it's a glossy plastic, it attracts a lot of grease from my fingers and feels dirty after a while. I also dislike it because the sweat from my hands will form into condensation on the back of the case. I also have a problem where the jack on my headphones (Audio Technica ATH-M50) is too large to fit in the hole provided.
I decided to purchase the Spigen 'Rugged Armor' case from Amazon after reading a lot of positive comments about it, but I have been left disappointed and debating whether to return it due to the sheer size and thickness that makes handling the phone (Which is already large enough!) incredibly difficult with small hands. The case does not add much friction despite the material used having a rubber-like appearance, and I actually feel more likely to drop the phone as a result of trying to fumble with the added size. As well as this, the cut-out for the headphone jack is still too small even though it's larger than the wider than the one seen on the stock case. I also find it a lot more difficult to access the fingerprint scanner due to the thickness of the case surrounding it. Another problem is that the case is quite difficult to put onto the phone and a lot harder to remove, to the point where it feels like i'm actually going to damage the phone by attempting to do this!
For my previous phone, a Lenovo ZUK Z2, I had a fantastic Nillkin 'Frosted Shield' shell case that was made from a soft-touch rubber-like plastic. It was very slim at about 2mm in thickness at most, and although it didn't offer much in the way of drop-protection, it did have a nice textured back and that increased the grip tremendously. So, despite the case not being able to protect the phone quite as much from being dropped, it didn't matter because the chances of dropping the phone in the first place were a lot less likely. I wondered whether there was something similar for the Axon 7, but instead in a TPU-style with the sealed corners, and the same thickness as the stock case that's included with the phone? Any recommendations would be most appreciated.
This one is the best one, hands down: https://www.amazon.de/ARTILVST-umgebene-Struktur-Oberfl%C3%A4che-Protector/dp/B01MTLLSPA/ref=sr_1_fkmr2_2?ie=UTF8&qid=1505381744&sr=8-2-fkmr2&keywords=axon+7+slim+case+sand
It is ultra slim and has a very nice feel.
Sui77 said:
This one is the best one, hands down: https://www.amazon.de/ARTILVST-umgebene-Struktur-Oberfl%C3%A4che-Protector/dp/B01MTLLSPA/ref=sr_1_fkmr2_2?ie=UTF8&qid=1505381744&sr=8-2-fkmr2&keywords=axon+7+slim+case+sand
It is ultra slim and has a very nice feel.
Click to expand...
Click to collapse
That looks nice, it's kinda like the old Sandstone Black finish on the OnePlus One. There was one similar to this on Amazon UK but I don't think it had the same texture to it. My only compliant with that one is that it isn't a TPU case which completely covers the corners, but on the other hand the sand texture probably adds a lot of grip to reduce the risk of it being dropped.
I'm currently looking into getting the J&D case from their official website. It's in TPU-form which covers the entire phone (Except from the power/volume buttons!) and has the textured soft-touch back I wanted. The only problem with this one is that the glossy plastic edges look a bit tacky in the pictures, but hopefully it's not as bad in person as it looks on the website. I have a discount code which knocks a subtle 15% off the price listed, so it might be worth a shot.
Looking into this now myself. The stock clear case will go yellow as they all do. Getting cheap see through black case as a temporary till I find a good one. I find the clear one a tad loose at the side.
Sui77 said:
This one is the best one, hands down: https://www.amazon.de/ARTILVST-umgebene-Struktur-Oberfl%C3%A4che-Protector/dp/B01MTLLSPA/ref=sr_1_fkmr2_2?ie=UTF8&qid=1505381744&sr=8-2-fkmr2&keywords=axon+7+slim+case+sand
It is ultra slim and has a very nice feel.
Click to expand...
Click to collapse
Hi there,
Does this case provide good grip?
Thanks for confirming!
joaste said:
Hi there,
Does this case provide good grip?
Thanks for confirming!
Click to expand...
Click to collapse
Yes.
In my opinion it's the perfect one.
My buddies ordered it for their Samsung cause of the nice touch.
Color is anthracite, not fancy but decent
Sui77 said:
Yes.
In my opinion it's the perfect one.
My buddies ordered it for their Samsung cause of the nice touch.
Color is anthracite, not fancy but decent
Click to expand...
Click to collapse
Thanks. I'm mostly interested in the grip. I had a similar case from Amazon. fr but it was in fact quite slippery (it had a satin feel to it). Had to send it back.
The stock case that came with the Axon 7 is quite grippy but it is slowly going yellow.
joaste said:
Thanks. I'm mostly interested in the grip. I had a similar case from Amazon. fr but it was in fact quite slippery (it had a satin feel to it). Had to send it back.
The stock case that came with the Axon 7 is quite grippy but it is slowly going yellow.
Click to expand...
Click to collapse
This one is a different story.
It's the best pick you can get
Sui77 said:
This one is a different story.
It's the best pick you can get
Click to expand...
Click to collapse
Thanks. Just ordered it.
joaste said:
Thanks. Just ordered it.
Click to expand...
Click to collapse
Hey, have you received the case yet? Just wondering what you thought to it. If either you or @Sui77 could post a picture of it, that would be great as well. I'm still debating whether to choose this or the J&D TPU case that completely conceals the corners. I can't stand using the case which came with the phone much longer, as it's made from glossy plastic and attracts a lot of filth and grease. I imagine the ARTILVST case would be a lot better in this regard.
P650SE said:
Hey, have you received the case yet? Just wondering what you thought to it. If either you or @Sui77 could post a picture of it, that would be great as well. I'm still debating whether to choose this or the J&D TPU case that completely conceals the corners. I can't stand using the case which came with the phone much longer, as it's made from glossy plastic and attracts a lot of filth and grease. I imagine the ARTILVST case would be a lot better in this regard.
Click to expand...
Click to collapse
Yes I did. Or is ok, but not as grippy as I was hoping for. The original case provides more grip.
Some pics attached.
joaste said:
Yes I did. Or is ok, but not as grippy as I was hoping for. The original case provides more grip.
Some pics attached.
Click to expand...
Click to collapse
Thanks for posting those pictures! That's a shame to hear the grip wasn't as good as expected. I wanted something which provided more grip than the stock case, so maybe this isn't the right one for me. I also live in the United Kingdom and having the case shipped from Germany would make it more expensive in postage costs. It does look like a nice case but I am worried it might not offer much protection if the phone is dropped. I think the J&D case would perhaps be better because it has a soft-touch back and conceals all the corners properly.
I have that same Spigen case as above, an Incipio TPU case in smoked brown, and another thin "shell case". This thin shell offers zero protection in case it is dropped, making using one pointless , IMO.
The Incipio case is OK, but again thin and will show wear very quickly. The Spigen one is my favorite hands down, doesn't add bulk to the phone all ports easily accessable, and the edges offer good grip.
christoophat said:
I have that same Spigen case as above, an Incipio TPU case in smoked brown, and another thin "shell case". This thin shell offers zero protection in case it is dropped, making using one pointless , IMO.
The Incipio case is OK, but again thin and will show wear very quickly. The Spigen one is my favorite hands down, doesn't add bulk to the phone all ports easily accessable, and the edges offer good grip.
Click to expand...
Click to collapse
Thanks for sharing your thoughts and opinions regarding the cases available for the Axon 7. It's interesting to hear how you found the Spigen case not to be bulky, because I found the opposite and returned it for that exact reason. I eventually purchased one of the cheap, plastic shell cases from AliExpress similar to the that in the pictures Joaste posted above.
My overall opinion on this case has been positive but it has worn on the edges and there are cracks down all four corners. As you mentioned, a shell case does not offer much drop protection but it's definitely better than not having a case at all and it does improve the grip quite notably. However, I wish it had a textured or 'Sandstone' back to help avoid grease buildup.
I am now looking for another case, but options in the UK are limited since the Axon 7 is not officially sold here.
I've been using my TPU smoke black case with a glass screen protector for a while and enjoyed that. I got fed up with the Poetic Revolution case because of the dry protector built into the front. It allowed dust and stuff in between the screen and protector. Tonight I stripped out the dry protector and put the case on with the glass protector still on the screen. Fits nice. I have a full coverage protector to fit and might see if it will work with the Poetic. Might need to trim the inner edges of the corners near the speaker grilles.
I've been using this Proworx case since right after I got my Axon 7, so for a bit over a year now. I wasn't super impressed when I got it so I figured I'd replace it as soon as I found something better or it wore out, but I'm still using it, which says something about it.
It isn't the slimmest, for sure, but it isn't as bulky as the Otter Boxes and whatnot that everyone with a non-cracked iphone seems to have. It protects very well - TPU around the edges, fully covering the corners (which is a must, in my eyes), polycarbonate back, enough of a lip on top to protect the screen if you set it down face-down, and the cut-outs and buttons are perfect. Good drop protection - I've "thrown" it onto asphalt, tile, and concrete without the phone getting a scratch. Also works well with the glass screen protectors we covered in another thread. Easy enough to put on and take off too, with no chance of the phone just falling out.
Again, not the thinnest, but not huge, and the protection is excellent. Plus they're cheap and come in multiple colors. And as is typical with cheap stuff manufactured in China, I've seen this same case under at least a couple of other brand names, CoverOn for one. For $5-$6 I recommend trying it - I like it enough that I pretty much never think about replacing it, even though it (a clear one) has yellowed a tad. After trying like 10 cases for my G3 and finding faults with each of them, I can say I like this one enough that I'll probably replace it with the same one, eventually.
emepher said:
I've been using this Proworx case since right after I got my Axon 7, so for a bit over a year now. I wasn't super impressed when I got it so I figured I'd replace it as soon as I found something better or it wore out, but I'm still using it, which says something about it.
It isn't the slimmest, for sure, but it isn't as bulky as the Otter Boxes and whatnot that everyone with a non-cracked iphone seems to have. It protects very well - TPU around the edges, fully covering the corners (which is a must, in my eyes), polycarbonate back, enough of a lip on top to protect the screen if you set it down face-down, and the cut-outs and buttons are perfect. Good drop protection - I've "thrown" it onto asphalt, tile, and concrete without the phone getting a scratch. Also works well with the glass screen protectors we covered in another thread. Easy enough to put on and take off too, with no chance of the phone just falling out.
Again, not the thinnest, but not huge, and the protection is excellent. Plus they're cheap and come in multiple colors. And as is typical with cheap stuff manufactured in China, I've seen this same case under at least a couple of other brand names, CoverOn for one. For $5-$6 I recommend trying it - I like it enough that I pretty much never think about replacing it, even though it (a clear one) has yellowed a tad. After trying like 10 cases for my G3 and finding faults with each of them, I can say I like this one enough that I'll probably replace it with the same one, eventually.
Click to expand...
Click to collapse
I decided to order one of these in black to try out. Have been quite happy with my Spigen, but after installing this Proworx case yesterday, I think I am falling in love. Seems to offer enough protection, fits & looks nice, AND I kind of like how the buttons are a bit harder to push in, which actually prevents me from squeezing open the screen every time I try to pick it up. :good:
RobboW said:
I've been using my TPU smoke black case with a glass screen protector for a while and enjoyed that. I got fed up with the Poetic Revolution case because of the dry protector built into the front. It allowed dust and stuff in between the screen and protector. Tonight I stripped out the dry protector and put the case on with the glass protector still on the screen. Fits nice. I have a full coverage protector to fit and might see if it will work with the Poetic. Might need to trim the inner edges of the corners near the speaker grilles.
Click to expand...
Click to collapse
Quoting myself here.
Today I fitted the full coverage protector to my Axon 7 and it fits into the Poetic Revolution case nicely! Glad I stripped out the dry protectors in the Poetic cases. I've also now fitted a plastic protector over the glass one as a quick and easy tear off to sacrifice for wear and tear but the glass one makes the front of the phone flat. Even with two stacked protectors, touch works perfectly.
The picture is slightly misleading as the black section also covers the capacitive buttons so there's no indicator of position, but not being backlit anyway, it makes little difference.
Here's a quicky bunch of pics. I have a soft TPU smoky case, black Poetic Revolution and a blue/grey Poetic Revolution which can be mix and matched. Got a couple of little bubbles under the plastic protector and will fix that later, or just remove it. Looks good with just the full coverage glass one.
If anyone is looking for a slim case I just picked up a Bear Motion Sand from eBay. Best case I've had so far for my A7 and I've tried quite a few. Feels like my OPO did.
https://www.amazon.com/dp/B01J9Y5CQ...d_r=3683683e-ab8d-11e8-96dd-777fa7fb2507&th=1
Been using this one for over 6 months now with out any issues , not as bulky as it looks and the stand is useful . I also have a full body clear skin from clear-coat that fits superbly, clear-coat has various outlets through the UK and installs as you wait , is a bit pricey at £30 for the full skin .
I work in the building trade so need it well protected .