Develop Bugs

[Q] Problem With CM?

Hello, can anyone help me please i followed the guides on the forum to unlock my bootloader - worked fine! Then flashed it - worked fine! then rooted and updated to 2.3.4 also worked fine.
Then i downloaded the FXP CM and followed the guide to install that, booted up fine but when am actually on the home page it just goes black and all i can see is the time, battery life etc.. at the top of the screen
Can someone please advise how i can fix this or install another rom over it if thats possible as i can't use my phone at the minute
Thanks In Advance

Did you install the 42 ROM?
Sent via CM7-FXP45

XperienceD said:
Did you install the 42 ROM?
Sent via CM7-FXP45
Click to expand...
Click to collapse
I am about 95% sure i did because it says in the guide, although i am at work at the minute so won't be able to check until i get home as i kept everything i downloaded in one folder.
Would it be possible to just start again from flashing it, then rooting an installing another ROM ?
Thanks

If your bootloader is unlocked you don't need to root, just flash the boot.img and CM7 zip.
Sent via CM7-FXP45

XperienceD said:
If your bootloader is unlocked you don't need to root, just flash the boot.img and CM7 zip.
Sent via CM7-FXP45
Click to expand...
Click to collapse
I have aleady done that twice and keep getting the same problem..., It loads up, but as soon as i go on anything app, msg, contact it will just go black and nothing else shows and also if i press the top button to lock it same happens
[Edit] By flash the boot.img do you mean type 'fastboot.exe boot boot.img' in the command window?

Waitey112 said:
[Edit] By flash the boot.img do you mean type 'fastboot.exe boot boot.img' in the command window?
Click to expand...
Click to collapse
Yes. 10 chars

Fastboot flash boot boot.img
Sent from my LT15i using XDA App

It's all sorted now and working fine.
Thanks very much for your help really appreciate it

IntMD said:
Fastboot flash boot boot.img
Sent from my LT15i using XDA App
Click to expand...
Click to collapse
12 points.
Sent via MT15i Nightly v14®

[GUIDE] How to ROOT Bell official v20e firmware

Instructions how to ROOT Official Bell Android 4.0.4 firmware version v20e​
Original thread
0. Extract P930_v20e_ROOT folder from attached file to C: drive
1. Flash v20e firmware (you can use official tool or UpTestEX_mod2_marwin.exe method)
2. Turn on USB debugging and Unknown Sources
3. Install LG_SystemBackupTest.apk and start it
4. Wthout touching anything press&hold power button and reboot, after reboot your phone must lags (you can see it by unlock in lockscreen)
5. Connect phone to PC and start root_P880.bat
6. Wait until phone reboots several times.
7. If you get root, you can delete SystemBackupTest app that you have installed on 3d step, because phone will lag with it

ISSUE - after the root the system storage is 315 MB only

kavena78 said:
ISSUE - after the root the system storage is 315 MB only
Click to expand...
Click to collapse
No issues. 2.15Gb total space

Please see the attached image, it is showing 315mb. I am getting low space warning. Pls help
Sent from my LG-P930 using xda app-developers app

kavena78 said:
Please see the attached image, it is showing 315mb. I am getting low space warning. Pls help
Sent from my LG-P930 using xda app-developers app
Click to expand...
Click to collapse
Factory reset.
Sent from my LG-P930 using xda premium

yes it works after factory reset, thanks

Recovery Boot Error
ROM Manager recovery boot failed
Secure booting Error!
Cause: boot certification verify
Any help pls

kavena78 said:
ROM Manager recovery boot failed
Secure booting Error!
Cause: boot certification verify
Any help pls
Click to expand...
Click to collapse
You can only install CWM when coming from a Gingerbread official ROM. Meaning you have to follow unbricking instructions to downgrade to an official Gingerbread ROM, then flash CWM using that. Currently there is no CWM-flashable version of Bell's ICS though, but one will probably pop up soon.

hi and help please
5. Connect phone to PC and start root_P880.bat for this do i use mass storage or the LG software?
also when i run the root_P880.bat i get only fail and cannot open and acess denied in the command prompt
the cell reboots twice and then the command prompt window closes
i need help
thank you
edit : it worked
i'll keep y original post just to show that when you get this issue
just try agin and again and again (from run the app and reboot part)
cheers to you for finding and posting this method

Once you do this method is it possible to unroot without going through the unbricking guide and reflashing the ROM?
Edit: NVM it looks like you can do it with the SU app, it says so on the second last page of original thread.

CWM
So is anyone working on a cwm recovery image for ics now that we have an easy root method? is this a simple thing to do?

cashy57 said:
So is anyone working on a cwm recovery image for ics now that we have an easy root method? is this a simple thing to do?
Click to expand...
Click to collapse
It already exists:
Bell version - http://forum.xda-developers.com/showthread.php?t=1837533
AT&T version - http://forum.xda-developers.com/showthread.php?t=1803617

@drumist,
I think he's asking if there's a version of CWM that can be flashed while on official ICS and the answer to that is no, unfortunately not with the ****ty ICS bootloader.
Sent from my LG-P930 using Tapatalk 2

Malnilion said:
@drumist,
I think he's asking if there's a version of CWM that can be flashed while on official ICS and the answer to that is no, unfortunately not with the ****ty ICS bootloader.
Click to expand...
Click to collapse
Oops, you're right.

to unroot it s really simple
just do the update to ICS again (via the lg prog) i did it ,and it works easy

Does this root method work on the at&t model v20c also ? Thanks

Worked perfectly on the first try. Thanks

does it work on att v20c?

divingbora said:
does it work on att v20c?
Click to expand...
Click to collapse
no

Will this work on my SU640 running on V20d?
Sent from my LG-SU640 using xda premium

help on flashtools

Please does anyone knows a workaround on the battery low error while flashing kdz file on flashtools..please help me on this matter..i really need it badly..thanks in advance..

help
help please..update on this problem

Doesnt anybody experience thia kind of problem?please if anyone is having the same problem,please share your experience here.coz i read that a lot of people experience this..
Sent from my Q360 using xda app-developers app

Have you tried this link?
http://forum.xda-developers.com/showthread.php?t=2559828
Sent from my Nexus 7 using xda app-developers app

luenboy said:
Please does anyone knows a workaround on the battery low error while flashing kdz file on flashtools..please help me on this matter..i really need it badly..thanks in advance..
Click to expand...
Click to collapse
Workaround:
Make use of your installed/reinstalled recovery system to restore a rom or better nandroid-backup that is already as close as possible to your stock firmware. From there the kdz flasher should work (at least according to my own experience).
This backup worked for me(E986)
http://storagecow.eu/Xda/Users/Anirudhks-OptimusGPro/Stock.rar

xifizurk said:
Workaround:
Make use of your installed/reinstalled recovery system to restore a rom or better nandroid-backup that is already as close as possible to your stock firmware. From there the kdz flasher should work (at least according to my own experience).
This backup worked for me(E986)
http://storagecow.eu/Xda/Users/Anirudhks-OptimusGPro/Stock.rar
Click to expand...
Click to collapse
I would love to see that my phone is at recovery mode..but i cant access it no matter what i do..i've tried the button combination but it fails to load cwm.i already have backup of my entire system on cwm,if only there is a way to install cwm or twrp on this to access recovery.or if there is a way to force this to boot recovery,there will be no problem
Sent from my Q360 using xda app-developers app

jimi_pooh said:
Have you tried this link?
http://forum.xda-developers.com/showthread.php?t=2559828
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Ive already tried that but keeps on getting an error after extracting the kdz file..
Sent from my Q360 using xda app-developers app

luenboy said:
I would love to see that my phone is at recovery mode..but i cant access it no matter what i do..i've tried the button combination but it fails to load cwm.i already have backup of my entire system on cwm,if only there is a way to install cwm or twrp on this to access recovery.or if there is a way to force this to boot recovery,there will be no problem
Sent from my Q360 using xda app-developers app
Click to expand...
Click to collapse
As far i understand yiu wont to go back to stock with kdz flashing. What is the reason? You say u cant get in recovery mode, so u havent the recovery bootloop after installing freegee. Why u wont to flash back to stock? Doesnt your g pro starts?

lg-user45 said:
As far i understand yiu wont to go back to stock with kdz flashing. What is the reason? You say u cant get in recovery mode, so u havent the recovery bootloop after installing freegee. Why u wont to flash back to stock? Doesnt your g pro starts?
Click to expand...
Click to collapse
No,my phone is stuck at lg logo.it wont pass that..and the reason why it is stuck is i flashed a custom kernel for lg e988..after flashing,it wont boot up..i can only access download mode..if i flash it using kdz updater,i kept on getting error extracting file..if i use lg online support,i kept getting battery level low error.if i use the tutorial how to bypass the battery low issue,im getting error after extracting kdz file..
Sent from my Q360 using xda app-developers app

I had 2 times problems with low battery issue. I passed it only changing from Diag mode to emergency.
And also it seems to me that the kdz flashing procedure passes only randomly without battery issue. But only on emergency.
I also reinstalled all drivers to reactivate usb ports. With some patience it should pass through

lg-user45 said:
I had 2 times problems with low battery issue. I passed it only changing from Diag mode to emergency.
And also it seems to me that the kdz flashing procedure passes only randomly without battery issue. But only on emergency.
I also reinstalled all drivers to reactivate usb ports. With some patience it should pass through
Click to expand...
Click to collapse
Still no luck..doe anyone here knows where i can download tot file or anyone knows how to convert .kdz to .oct?
Sent from my Q360 using xda app-developers app

Custom Recovery and Rom

If you want a custom recovery and rom and you just unlocked your bootloader go here:
http://androidhosting.org/Devs/Dhacker29/msm8960/
Download and Flash:
XT901-XT907-TWRP-2.6.3.0-recovery.img
and
cm-11-20140615-UNOFFICIAL-RAZR-HD_M-KITKAT-TEST
and enjoy.
--
ERK

Any way to flash the recovery without a PC?
Sent from my XT907 using XDA Free mobile app

ezknives said:
Any way to flash the recovery without a PC?
Sent from my XT907 using XDA Free mobile app
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=de.mkrtchyan.recoverytools
or
https://play.google.com/store/apps/details?id=com.cgollner.flashify

As always thank you kindly ATTACK...
Sent from my XT907 using XDA Free mobile app

Wich one of those did you use?
And did it work? Can we use rom manager?
Sent from my XT907 using XDA Free mobile app

The first one with twrp 2.7... Worked fine for me...
Sent from my XT907 using XDA Free mobile app

I can't seem to reboot into recovery correctly. Every attempt just lands me back in the stock firmware. Rebooting from there to recovery via adb just gives me the Motorola warning.

Strife89 said:
I can't seem to reboot into recovery correctly. Every attempt just lands me back in the stock firmware. Rebooting from there to recovery via adb just gives me the Motorola warning.
Click to expand...
Click to collapse
This is what I use
https://play.google.com/store/apps/details?id=com.siriusapplications.quickboot

ATTACK said:
This is what I use
https://play.google.com/store/apps/details?id=com.siriusapplications.quickboot
Click to expand...
Click to collapse
No dice. Rebooting to recovery even with that just leaves me staring at the boot image.
EDIT: I remember reading that those who took the KitKat OTA got a different boot image that makes going back to Jellybean difficult, if not impossible. Could that have anything to do with this?

Strife89 said:
No dice. Rebooting to recovery even with that just leaves me staring at the boot image.
EDIT: I remember reading that those who took the KitKat OTA got a different boot image that makes going back to Jellybean difficult, if not impossible. Could that have anything to do with this?
Click to expand...
Click to collapse
Which recovery are you flashing? It should read TWRP2710-RAZR_M-KITKAT.img.

ATTACK said:
Which recovery are you flashing? It should read TWRP2710-RAZR_M-KITKAT.img.
Click to expand...
Click to collapse
Bah, pay me no mind. I was trying to flash a CWM recovery because that's what I'm familiar with. I tried the one you just named and it works fine.
Sorry about that!

Just an FYI I couldn't get rashr to even look for the file so I tried flashify and it installed recovery with ease.
Thanks for the links attack. I don't like to try these flashing apks without a recommendation.
Sent from my XT907 using XDA Free mobile app

Strife89 said:
I can't seem to reboot into recovery correctly. Every attempt just lands me back in the stock firmware. Rebooting from there to recovery via adb just gives me the Motorola warning.
Click to expand...
Click to collapse
Are you Fastboot flashing?

Guys KEEP IN MIND:
These are not officials, these are fairly beta builds. You will get errors, I was hoping this would reach some crack-flashers.
That's basically who this is for.

ericerk said:
Guys KEEP IN MIND:
These are not officials, these are fairly beta builds. You will get errors, I was hoping this would reach some crack-flashers.
That's basically who this is for.
Click to expand...
Click to collapse
How can we get onto official CM then?
I know it has something to do with the kernel. We can't downgrade the kernel to the one CM is using? Or we have to wait until CM move up to kernel 3.4?

gtmaster303 said:
How can we get onto official CM then?
I know it has something to do with the kernel. We can't downgrade the kernel to the one CM is using? Or we have to wait until CM move up to kernel 3.4?
Click to expand...
Click to collapse
The latest Nightly is from February, which is 4.4.2.
Honestly keep checking that website, and check XDA.
Since the bootloader has been unlocked there should be a lot of movement / action in the dev section.
I would honestly not flash anything older, I mean feel free to mess around w/ kernel that are newer than 4.4.2 on CM.
I can't promise anything if you're on stock. I hope that helped at least a bit.

Didn't think this deserved its own thread, but could someone on 4.4.2 upload their systemui.apk real quick?
Sent from my One using XDA Premium 4 mobile app

Leraeniesh said:
Didn't think this deserved its own thread, but could someone on 4.4.2 upload their systemui.apk real quick?
Sent from my One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Odexed or Deodexed?
Here's a Deodexed SystemUI

I'm unable to boot official CM 11, yes i flashed it with TWRP2710-RAZR_M-KITKAT recovery i also try mokee 4.4.3 but same stuck on bootloader.

ericerk said:
Are you Fastboot flashing?
Click to expand...
Click to collapse
I was, but in the end I followed @ATTACK 's advice and used the apps from the Play Store. My impatience and forgetfulness caused me to butt my head against a metaphorical brick wall a few times, but I managed.

[Q] Stuck at bootloader

Hi!
A few days ago I flashed Gohma rom and smart me, pressed reset device at the settings. after that there was bootloop. I tried to flash stock image through fastboot, it flashed succesfully but now I cannot get out of that bootloader screen. I have tried every stock images but no luck... Whenever I power on the device it vibrates three times immediately and boots to bootloader.
So, do you have any advice here?

In the gohma ROM zip, there's a return to stock script. Try to remove the two adb commands from that script and run it to flash your watch.
It's helped some other people.
Sent from my GT-N7100 using XDA Free mobile app

dproldan said:
In the gohma ROM zip, there's a return to stock script. Try to remove the two adb commands from that script and run it to flash your watch.
It's helped some other people.
Sent from my GT-N7100 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for the advice, but didnt work... still stuck on the bootloader screen :/ guess I'll send it back and hope to get replacement...

Memmpf said:
Thanks for the advice, but didnt work... still stuck on the bootloader screen :/ guess I'll send it back and hope to get replacement...
Click to expand...
Click to collapse
I had the same and I put my watch in boot loader mode and used the Super Tool found in developer area and pushed the boot loader and system to the phone and was able to get it to boot...give that a try