[Q] Can't turn on location services at all. - Samsung Galaxy Nexus

I have an unlocked galaxy Nexus. It is rooted and running slimkat. When I go into location services the slider is on the off position and whenever I try to slide it to the on position is automatically goes back to off. Even in the pull down menu it doesn't allow me to turn location on. Does it have something to do with my phone or is it Rogers? I had to manually set up the Rogers non-lte an yesterday, does that have anything to do with it?

Related

Battery Tips

Hello all. I just decided to retire my Vibrant yesterday and got an S3. I haven't changed much on it. I'll run it stock for quite a while. I am using a custom launcher, etc.
My battery life is horrible though! It's not even noon and I'm already down to 35%. I've made sure S Voice is not set to wake up when I talk to it. My weather was set to update every 15 minutes by default, but I've changed it to every hour. I charged it in the van on the way to take kiddos to school, and it was at 80ish percent. So that's quite a drop in not a long time. Granted, it's new, so I'm playing with it.
What tips can you give me to get the best battery life I can out of it? Besides custom ROMs. I'm not even rooted. Yet.
Well how long has your screen been on? That will be the determining factor in your battery life. Like you said, it is new and you are playing with it so I am willing to bet that probably has something to do with it.
Otherwise, turn data off when you aren't using it and keep the screen brightness as low as possible.
Here's what I do with a freshly flashed rom. I pretty much drill down through every setting turning off what I dont need.
WiFi - turn off network notification.
More Settings - Everything off
Sound - turn off everything below "System"
Display - Auto brightness off. Timeout 1min. Smart Stay off. Touch key always on or off. Auto Adj Screen Tone off. Battery% on.
Power Saving - Off.
Accounts and Sync - Off
Location Svcs - Off
Language and Input - Voice Cmd off. Voice Recognizer (all off for google and Samsung). Voice Search all off. TTS driving mode off.
Backup and Reset - can't remember what its listed under but below carrier data press to open and uncheck collect data (this is carrier iq, so I removed it asap once rooted)
Accessory - all off
Developer Options - set animation scales to 0.5x.
Hope that helps. I keep a lot off and only turn stuff on when I need it. There's some pretty cool features but for me it doesn't hurt my experiance with the phone to not use a lot of them.
Sent from my SGH-T999 using xda app-developers app
joshnichols189 said:
Well how long has your screen been on? That will be the determining factor in your battery life. Like you said, it is new and you are playing with it so I am willing to bet that probably has something to do with it.
Otherwise, turn data off when you aren't using it and keep the screen brightness as low as possible.
Click to expand...
Click to collapse
Ah. My screen was set to stay on for 10 minutes. That, I would imagine, was a large part of my problem. At least according to my battery stats. Why do they set that as default??
My screen brightness is now set to low. What is this with the data? Doesn't that mean I would not receive email, google talk messages, etc?
DocHoliday77 said:
Here's what I do with a freshly flashed rom. I pretty much drill down through every setting turning off what I dont need.
WiFi - turn off network notification.
More Settings - Everything off
Sound - turn off everything below "System"
Display - Auto brightness off. Timeout 1min. Smart Stay off. Touch key always on or off. Auto Adj Screen Tone off. Battery% on.
Power Saving - Off.
Accounts and Sync - Off
Location Svcs - Off
Language and Input - Voice Cmd off. Voice Recognizer (all off for google and Samsung). Voice Search all off. TTS driving mode off.
Backup and Reset - can't remember what its listed under but below carrier data press to open and uncheck collect data (this is carrier iq, so I removed it asap once rooted)
Accessory - all off
Developer Options - set animation scales to 0.5x.
Click to expand...
Click to collapse
I just did almost all of these. With the WiFi detection off, will I need to manually find my home network each time I get back home?
Also, if I turn Voice Command off, I won't be able to push the button and say "Listen to blah blah blah" or "Navigate to ....." correct?
The_MamaBee said:
Ah. My screen was set to stay on for 10 minutes. That, I would imagine, was a large part of my problem. At least according to my battery stats. Why do they set that as default??
My screen brightness is now set to low. What is this with the data? Doesn't that mean I would not receive email, google talk messages, etc?
I just did almost all of these. With the WiFi detection off, will I need to manually find my home network each time I get back home?
Also, if I turn Voice Command off, I won't be able to push the button and say "Listen to blah blah blah" or "Navigate to ....." correct?
Click to expand...
Click to collapse
I am on CM10 so I am not sure where it is for stock Touchwiz, but I would assume you could go to settings > display > screen timeout and change it there.
Yes, turning off data would mean no push email or Google Talk messages. You could download an app that turns off your data when you turn the screen off, then on when you turn the screen on and your emails and messages would come through then.
joshnichols189 said:
I am on CM10 so I am not sure where it is for stock Touchwiz, but I would assume you could go to settings > display > screen timeout and change it there.
Yes, turning off data would mean no push email or Google Talk messages. You could download an app that turns off your data when you turn the screen off, then on when you turn the screen on and your emails and messages would come through then.
Click to expand...
Click to collapse
Aah. Okay. Thank you! Yes, I fixed the screen timeout.
The_MamaBee said:
I just did almost all of these. With the WiFi detection off, will I need to manually find my home network each time I get back home?
Also, if I turn Voice Command off, I won't be able to push the button and say "Listen to blah blah blah" or "Navigate to ....." correct?
Click to expand...
Click to collapse
I should have also mentioned I turn off wifi and data when I don't need it to, which is rare but it happens at times!
By turning off the wifi notification, the only change is it won't give you a notification in status bar that there's an open network nearby that you could connect to. Itll still auto connect to any network you've already got configured.
For voice cmd, it won't let svoice open apps for you. But for example in navigation you can still hit the mic button on keyboard and speak your destination.
Sent from my SGH-T999 using xda app-developers app
Can you upload a Screenshot of your battery screen... It will make it a lot easier to look at
Sent from my SGH-T999 using xda premium
On the Wifi issue. What I do with regards to wifi, is if I know that I am not going to be near an open connection, I turn it off. When I am at work, there is no wifi nearby that I can connect to. So I use Mobile Data instead. Why you ask? It is because when you have your wifi on, in the back ground it is always scanning for a signal. Turn that off and no scan, then no drain for something that you are not using at moment.
I know that this is a bit deeper than you wanted to go, but in the Build.Prop you can put a setting [wifi.supplicant_scan_interval=] and you can set that out. The time in there is the time duration on scanning intervals based on seconds. So the setting wifi.supplicant_scan_interval=180 means that it scans for wifi and doesn't find one, then counts off 180seconds and scans again.<--This is what I have mine set too, btw.
Disable the wifi when your not using it.

[Q] enable airplane mode turns wifi off in 4.2?

i have 2 gnex phones that both just updated to 4.2, and prior to the update, when i turned on airplane mode, cell data would turn off but wifi would be left on.
after the 4.2 update, one phone continues to work that way, with airplane mode on, cell data is turned off but wifi is left on. the other phone, enabling airplane mode turns off both wifi and cell data.
i know that apps are not able to toggle airplane mode anymore (AutoAP) because of security changes but why would airplane mode work differently on 2 phones running the same 4.2 build?
both phones are running stock android, no root, no flashing.
is there a setting i'm missing? was this something in the update that other people are experiencing?
thanks for the help!
Can't you just toggle wifi back on after?
WiredPirate said:
Can't you just toggle wifi back on after?
Click to expand...
Click to collapse
yes, but it immediately shuts wifi back off.
with airplane mode on, i can go to the wifi settings screen, and hit the toggle, it turns on, scans, finds the local wifi, connects and at the same moment it connects the wifi on/off toggle flips back to off.
just seems weird that it is happening with this phone but mine is working as expected...
Then you must go back to 4.1.2 with 4.2 gapps.
Sent from my Galaxy Nexus using xda premium
danishprakash said:
Then you must go back to 4.1.2 with 4.2 gapps.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
any idea why it would work with one 4.2 phone and not the other?
seems odd i'd have to backport one phone but leave the other at 4.2
This happens on my Nexus 4. Airplane mode constantly disables WiFi, no matter what. And yes the app AutoAP doesn't work either.
I have found this app, Airplane Mode Wi-Fi Tool, funny that it was made for Android versions prior to 2.0.
The actual app doesn't seem to work (to enable/disable airplane mode and WiFi), but within the app lies a nifty feature in the Preferences menu under Extras:
Keep Wi-fi On
Wi-fi on Airplane Mode
Check both of those and you should be able to turn Airplane mode on and then keep WiFi on.
Cheers.
obscure.detour said:
This happens on my Nexus 4. Airplane mode constantly disables WiFi, no matter what. And yes the app AutoAP doesn't work either.
I have found this app, Airplane Mode Wi-Fi Tool, funny that it was made for Android versions prior to 2.0.
The actual app doesn't seem to work (to enable/disable airplane mode and WiFi), but within the app lies a nifty feature in the Preferences menu under Extras:
Keep Wi-fi On
Wi-fi on Airplane Mode
Check both of those and you should be able to turn Airplane mode on and then keep WiFi on.
Cheers.
Click to expand...
Click to collapse
thanks i'll try that out. that app is actually dev'd by the same guy as AutoAP.
chadd_k2 said:
thanks i'll try that out. that app is actually dev'd by the same guy as AutoAP.
Click to expand...
Click to collapse
that didn't work
i could check "keep wifi on" but whenever i went back to that settings page, it was unchecked again. like it was refusing to save.
the rest of the settings saved.
wrong thread
chadd_k2 said:
i have 2 gnex phones that both just updated to 4.2, and prior to the update, when i turned on airplane mode, cell data would turn off but wifi would be left on
Click to expand...
Click to collapse
im on ARHD 7.0.0 and even in prior versions, when airplane mode was turned on wifi would turn off but it could be turned back on. how come your wifi stays on during the airplane mod transition?
Isn't airplane mode means disable any active radio transmission includes Wi-Fi which is sent and receive data ?
If you just wanna stay off calls why don't you just use automatic redirect incoming calls to voice mail or just simply pull out the sim card?
Sent from my Galaxy Nexus using xda premium
Airplane mode is supposed to turn wifi off (its a transceiver). However, You can turn it back on while airplane mode is activated and still have the other functions off.
That how airplane mode is supposed to work, thats not a bug, every phone ive had does this
Sent from my Galaxy Nexus using Tapatalk 2
rptw said:
im on ARHD 7.0.0 and even in prior versions, when airplane mode was turned on wifi would turn off but it could be turned back on. how come your wifi stays on during the airplane mod transition?
Click to expand...
Click to collapse
i don't know why, but wifi always has always stayed on when switching to AP mode since i got our Gnex phones in sept. (4.1 i think). wifi even stayed enable when switching to AP mode in my old crappy kin two.
and i think it must be fairly common based upon the instructions in the $30 cell service thread, but i'm no android expert so maybe i'm wrong.
chadd_k2 said:
i have 2 gnex phones that both just updated to 4.2, and prior to the update, when i turned on airplane mode, cell data would turn off but wifi would be left on.
after the 4.2 update, one phone continues to work that way, with airplane mode on, cell data is turned off but wifi is left on. the other phone, enabling airplane mode turns off both wifi and cell data.
i know that apps are not able to toggle airplane mode anymore (AutoAP) because of security changes but why would airplane mode work differently on 2 phones running the same 4.2 build?
both phones are running stock android, no root, no flashing.
is there a setting i'm missing? was this something in the update that other people are experiencing?
thanks for the help!
Click to expand...
Click to collapse
There's a lot of talk about this. Check the [GUIDE] to voip/$30/month plans. But it sounds like google moved it into part of core services or something like that. So none of the autoap type programs work any more. But one member had this suggestion below in that other thread. Gotta buy Tasker, but should be able to get back to working like AutoAP did.
Download Secure Settings. Launch Secure Settings, go over to the Helper tab and install the helper. Then go to Tasker. Go into your task and delete the Airplane Mode radio step and the Airplane mode on step. Then hit the + at the bottom left, go to Plugins, select Secure Settings. Hit edit. Scroll down to "Airplane Mode Radios" and select it, and then select "Cell" from the dropdown. Hit the save button at the bottom left and select the check mark to create the task. Move the task where it needs to be by dragging on the right side up and down. Then create a new task, Plugins, Secure Settings, edit, Airplane mode, on, save button, check mark, move to position. You can figure out the rest. Works perfectly.
Llama works as well, it's free and looks less complicated
jpmanchester said:
There's a lot of talk about this. Check the [GUIDE] to voip/$30/month plans. But it sounds like google moved it into part of core services or something like that. So none of the autoap type programs work any more. But one member had this suggestion below in that other thread. Gotta buy Tasker, but should be able to get back to working like AutoAP did.
Download Secure Settings. Launch Secure Settings, go over to the Helper tab and install the helper. Then go to Tasker. Go into your task and delete the Airplane Mode radio step and the Airplane mode on step. Then hit the + at the bottom left, go to Plugins, select Secure Settings. Hit edit. Scroll down to "Airplane Mode Radios" and select it, and then select "Cell" from the dropdown. Hit the save button at the bottom left and select the check mark to create the task. Move the task where it needs to be by dragging on the right side up and down. Then create a new task, Plugins, Secure Settings, edit, Airplane mode, on, save button, check mark, move to position. You can figure out the rest. Works perfectly.
Click to expand...
Click to collapse
Many thanks. Got this working after playing with Secure Settings and Tasker, works great...:good:
delete
Delete
keep wifi on in airplane mode
I guess I have figured out how to do it with Tasker or Secure Settings.
Both have two actions like "Airplane Mode" and "Airplane Radios", so the second one doesn't turn off anything, but set, what to control with "Airplane Mode" action. Setting seems to be system wide and permanent (saved after reboot).
Good luck

Location and GPS issues

Just updated my note 3 to the most recent version ending in dnf4. The GPS icon in the notification panel is now changed to location. I like having location services on but only in power saving until I need gps to navigate etc. Now the location icon must be checked in order to use Google location services. Every time I select location on it asks for permission to track my location and automatically goes into high accuracy mode. I have to go to settings and select power saving and do the same for when I want gps. It's really annoying. Anyone else having this problem? Anyone way to go back to the way it was with only the gps toggle? Much thanks in advance.
Been that way since ne6
Interesting I was in CNB4 before this and I might go back. I do not like this set up.
i can confirm is a problem with nf4 it was fine on nf1

[Q] Help: Physically can't turn of GPS on Note 4. Always on GPS only mode.

I have a new verizon Note 4. It's been a great phone with very few problems until recently. I can't turn off the GPS. I'm not talking about GPS running in the background of applications. I'm talking about in the Location settings I can't turn off the GPS. I slide the switch to the off position and it jumps right back to on. There's nothing I can do. I've taken the battery out, force stopped all the applications that access my GPS, and cleared my cache in the safe boot settings. Does anyone know why this is? Under "Locating Method" I can't change it to anything but "GPS only". Power Saving is grayed out and High accuracy will allow me to select it, but when I go back into settings it is back to GPS only. This isn't a huge problem, but it's concerning me that I can't decide when I want to have the GPS network disabled or not to save my battery.
spencerprice said:
I have a new verizon Note 4. It's been a great phone with very few problems until recently. I can't turn off the GPS. I'm not talking about GPS running in the background of applications. I'm talking about in the Location settings I can't turn off the GPS. I slide the switch to the off position and it jumps right back to on. There's nothing I can do. I've taken the battery out, force stopped all the applications that access my GPS, and cleared my cache in the safe boot settings. Does anyone know why this is? Under "Locating Method" I can't change it to anything but "GPS only". Power Saving is grayed out and High accuracy will allow me to select it, but when I go back into settings it is back to GPS only. This isn't a huge problem, but it's concerning me that I can't decide when I want to have the GPS network disabled or not to save my battery.
Click to expand...
Click to collapse
You may end up having to do a factory reset. You could try downloading a toggle app and use it to try to turn off GPS.

[Q] Smart Settings Wifi Question / Issue

If you have wifi set to off when you're either away from home or at home, should the wifi notification icon on the slide down notification menu thing be greyed out (not blue)? When i manually turn off wifi, and enter my home location (to which i have my smart setting to turn on wifi) wifi turns on automatically and connects to my router.
When I leave my home area (i have the smart setting to turn off wifi) it does not appear to turn off. Has anyone ran into this issue?
I guess I might be the only one with this issue. Strange.
Same here, so far the only issue I'm having with the G4, but still annoying
Same here, smart settings is not working properly
It requires data to work.
What data? Home location is set, data is always active..
Llama does a much better job and it's free on the Play Store.
Did you set your GPS to high accuracy and set up your home location. Mine works fine
BAD ASS NOTE 4 & LG G4

Categories

Resources