[Q] superfusion kernel cwm stuck - Xperia Arc Q&A, Help & Troubleshooting

here is what am i doing
i flash c-rom-kk-v.6.5 kitkat
then i'm downgrading to jb 4.1.2
after installed kernel super fusion stuck at cwm logo nothing happend
how can i fix this?

noctv said:
here is what am i doing
i flash c-rom-kk-v.6.5 kitkat
then i'm downgrading to jb 4.1.2
after installed kernel super fusion stuck at cwm logo nothing happend
how can i fix this?
Click to expand...
Click to collapse
Try this in fastboot mode: fastboot erase system and fastboot erase userdata...
Sent from my MT11i using Tapatalk 2

Attitude.SSJ said:
Try this in fastboot mode: fastboot erase system and fastboot erase userdata...
Sent from my MT11i using Tapatalk 2
Click to expand...
Click to collapse
trying to reflash the kernel can't get into fastboot mode, always on flashmode when pressing the back or volume up button
how do i get into fastboot mode now?

To get into fastboot mode, turn off your phone, hold the back button and connect your phone to your PC.
僕のINO2から送られてきた

Errr... Menu button??
Sent from my MT11i using Tapatalk 2

noctv said:
here is what am i doing
i flash c-rom-kk-v.6.5 kitkat
then i'm downgrading to jb 4.1.2
after installed kernel super fusion stuck at cwm logo nothing happend
how can i fix this?
Click to expand...
Click to collapse
KitKat ROMs change partition tables. Flash stock firmware with Flashtool to restore original partition layout and then reinstall JB ROM.

hi.same problem kinda.It's the rom I want to install:http://forum.xda-developers.com/showthread.php?t=2155657&page=131
I get stuck at fusion logo.My device is Neo V.help please
I'm changing from this rom to the SJB:http://forum.xda-developers.com/showthread.php?t=2723945
sorry for my english

Ramin2097 said:
hi.same problem kinda.It's the rom I want to install:http://forum.xda-developers.com/showthread.php?t=2155657&page=131
I get stuck at fusion logo.My device is Neo V.help please
I'm changing from this rom to the SJB:http://forum.xda-developers.com/showthread.php?t=2723945
sorry for my english
Click to expand...
Click to collapse
you forget format partitions!!!!
do this:
1. flash back OLD kernel from your old rom (4.4.2) (will boot)
2 go directly to recovery& FORMAT system, data & cache in mounts n storage menu. power off
3. flash fusion kernel now. & go recovery. again format partitions.
4. install rom

bejunk said:
you forget format partitions!!!!
do this:
1. flash back OLD kernel from your old rom (4.4.2) (will boot)
2 go directly to recovery& FORMAT system, data & cache in mounts n storage menu. power off
3. flash fusion kernel now. & go recovery. again format partitions.
4. install rom
Click to expand...
Click to collapse
Thank you very much.sorry for my newbie questions.don't know any where else to ask.so I want to set my governor and I/O to something balanced between performance and battery.what combination should I use for my Neo V?
and is that normal to get random bots every two or three days?

Related

My GNex maguro not accepting Jelly bean

I have Galaxy Nexus Maguro and I tried all ways to install jelly bean and it fails and stuck on Nexus logo ... I tried stock ROMs and kernels and Cocked one's but no success. The device work perfectly with all ICE Cream version. Any help or hint or tips will be appreciated.
Thanks in advance ...
alfkhr said:
I have Galaxy Nexus Maguro and I tried all ways to install jelly bean and it fails and stuck on Nexus logo ... I tried stock ROMs and kernels and Cocked one's but no success. The device work perfectly with all ICE Cream version. Any help or hint or tips will be appreciated.
Thanks in advance ...
Click to expand...
Click to collapse
Look at the "flash" link in my signature.
Sent from my Galaxy Nexus using Tapatalk 2
no luck
efrant said:
Look at the "flash" link in my signature.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
First thank you for your response. I followed your procedure but the problem still exist. Stuck on Nexus logo.
More Info Required...
alfkhr said:
First thank you for your response. I followed your procedure but the problem still exist. Stuck on Nexus logo.
Click to expand...
Click to collapse
Are you unlocked and rooted?
Have you installed CWM?
If so, can you boot sucessfully to it?
Are you using the GN Toolkit?
Bit more info as to what you have done so far would be helpful...
unsuccessfully
I am very sad http://forum.xda-developers.com/images/icons/icon9.gif
alfkhr said:
First thank you for your response. I followed your procedure but the problem still exist. Stuck on Nexus logo.
Click to expand...
Click to collapse
You need to provide a bit more detail for us to help. Did you flash all the images (including the lc03 bootloader)? Did they flash successfully?
Sent from my Galaxy Nexus using Tapatalk 2
I did all scenarios ...
efrant said:
You need to provide a bit more detail for us to help. Did you flash all the images (including the lc03 bootloader)? Did they flash successfully?
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
All six img files were flashed successfully. Device rebooted and stuck on New Jellybean logo. To be sure what I did is right I did the same steps for ICS img files and it boots to ICS without any problem ,,,
before that I try to use recovery CWM but without luck.
alfkhr said:
All six img files were flashed successfully. Device rebooted and stuck on New Jellybean logo. To be sure what I did is right I did the same steps for ICS img files and it boots to ICS without any problem ,,,
before that I try to use recovery CWM but without luck.
Click to expand...
Click to collapse
When you are booted in fastboot mode, does it indicate that you are on the lc03 bootloader and xxlf1 radio?
Sent from my Galaxy Nexus using Tapatalk 2
Hanging When Booting JB
alfkhr said:
All six img files were flashed successfully. Device rebooted and stuck on New Jellybean logo. To be sure what I did is right I did the same steps for ICS img files and it boots to ICS without any problem ,,,
before that I try to use recovery CWM but without luck.
Click to expand...
Click to collapse
What happens when you boot into CWM?
If you have a JB ROM image on your flash then you should be able to completely wipe the phone (system, data and dalvik (under advanced options)), install the new ROM then boot it up.
Having a phone that hangs during boot is usually symptomatic of not having wiped the phone properly when flashing a new ROM.
yes
efrant said:
When you are booted in fastboot mode, does it indicate that you are on the lc03 bootloader and xxlf1 radio?
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Yes boot loader version is lc03 and Radio is xxlf1
mlindema said:
What happens when you boot into CWM?
If you have a JB ROM image on your flash then you should be able to completely wipe the phone (system, data and dalvik (under advanced options)), install the new ROM then boot it up.
Having a phone that hangs during boot is usually symptomatic of not having wiped the phone properly when flashing a new ROM.
Click to expand...
Click to collapse
Yeah it sounds like maybe you didn't wipe man.
Sent from my Galaxy Nexus using Tapatalk 2
Yes I do
mlindema said:
What happens when you boot into CWM?
If you have a JB ROM image on your flash then you should be able to completely wipe the phone (system, data and dalvik (under advanced options)), install the new ROM then boot it up.
Having a phone that hangs during boot is usually symptomatic of not having wiped the phone properly when flashing a new ROM.
Click to expand...
Click to collapse
I did all kind of wipe !!!
Try this: Make sure you have the JRO03C boot and system images handy (i.e., in the same directory as your fastboot.exe file), reboot into fastboot mode and type the following command in a terminal:
fastboot erase system
fastboot erase boot
fastboot erase userdata
fastboot reboot-bootloader
fastboot flash system.img
fastboot flash boot.img
fastboot reboot-bootloader
fastboot reboot
EDIT: Note that it should take 5-10 mins to boot up.
Still
efrant said:
Try this: Make sure you have the JRO03C boot and system images handy (i.e., in the same directory as your fastboot.exe file), reboot into fastboot mode and type the following command in a terminal:
fastboot erase system
fastboot erase boot
fastboot erase userdata
fastboot reboot-bootloader
fastboot flash system.img
fastboot flash boot.img
fastboot reboot-bootloader
fastboot reboot
EDIT: Note that it should take 5-10 mins to boot up.
Click to expand...
Click to collapse
Still nothing ...but there is something I should mention ... I was in JB before one month .. then I got back to ICS cos JB still in the first stages as custom Rom. Then I flags ics miui rom and work great then I flashed miui update and it was corrupted and get many problems till I fix it by going back to stock ICS. Now do you think this is the issue ???
alfkhr said:
Still nothing ...but there is something I should mention ... I was in JB before one month .. then I got back to ICS cos JB still in the first stages as custom Rom. Then I flags ics miui rom and work great then I flashed miui update and it was corrupted and get many problems till I fix it by going back to stock ICS. Now do you think this is the issue ???
Click to expand...
Click to collapse
Going back and forth should have nothing to do with it. But it really does sound like you're not wiping one of the needed things first which mixes your ICS and JB files.
I'd suggest that you download something like CM10 and AOKP build1, go to CWM and do ROM Wipe/Factory Reset, Wipe Cache, and Wipe Dalvik. These are the 3 you need to do. Then install zip from SD - your new ROM. Then install gapps for JB. Boot up. If you use Titanium Backup, don't restore any system data.
Yes I do
netbuzz said:
Going back and forth should have nothing to do with it. But it really does sound like you're not wiping one of the needed things first which mixes your ICS and JB files.
I'd suggest that you download something like CM10 and AOKP build1, go to CWM and do ROM Wipe/Factory Reset, Wipe Cache, and Wipe Dalvik. These are the 3 you need to do. Then install zip from SD - your new ROM. Then install gapps for JB. Boot up. If you use Titanium Backup, don't restore any system data.
Click to expand...
Click to collapse
still the same
Up

All roms got stuck on bootloop

Hi all i try to install for my friend Roms but failed i try this rom http://forum.xda-developers.com/showthread.php?t=1928416
P.S. His phone is Arc S
What i was doing
1.Boot http://forum.xda-developers.com/showthread.php?t=1885559
2.WIpe Data and Cahce
3.Install rom but it's said"E:Error in /sdcard/SnapSeries_C.A.M.P_Anzu__V01_Signed_ideosdevzack.zip
4. and then stuck allways on boot loop
I rooted phone Unlock bootloader then use Emulator hack exploit and i installed recovery CWM-install.rar
Paulius7 said:
Hi all i try to install for my friend Roms but failed i try this rom http://forum.xda-developers.com/showthread.php?t=1928416
P.S. His phone is Arc S
What i was doing
1.Boot http://forum.xda-developers.com/showthread.php?t=1885559
2.WIpe Data and Cahce
3.Install rom but it's said"E:Error in /sdcard/SnapSeries_C.A.M.P_Anzu__V01_Signed_ideosdevzack.zip
4. and then stuck allways on boot loop
I rooted phone Unlock bootloader then use Emulator hack exploit and i installed recovery CWM-install.rar
Click to expand...
Click to collapse
try formatting /system from mounts and storage
Sent from my Xperia Neo V running Paranoid Android NXT
How can now i go to Cwm ? i clicking when turn on but can't help,
Paulius7 said:
How can now i go to Cwm ? i clicking when turn on but can't help,
Click to expand...
Click to collapse
How did u flashed the kernel? Fastboot(cmd) or flashtool?
Sent from my Xperia Neo V running Paranoid Android NXT
Do i need to flash or boot ?
Paulius7 said:
Do i need to flash or boot ?
Click to expand...
Click to collapse
Connect your phone in fastboot mode
Place your kernel.img in c:/androidsdk/platform tools/
Open cmd window in platform tools by right clicking mouse while keep pressing shift key
In cmd type
fastboot flash boot kernel.img
Where kernel.img is your kernel's name
After it shows Finished
Disconnect the phone now try booting in recovery
Sent from my Xperia Neo V running Paranoid Android NXT
I don't do like you said I boot it not flashed and go to CWM recovery. Flashed system wipe full and now try to install That rom
It's not easy like SGS2 DDD
--------------------------------Add---------------------------------------------
Ok now i installed all good but now reboot it every time on sony logo...
Paulius7 said:
I don't do like you said I boot it not flashed and go to CWM recovery. Flashed system wipe full and now try to install That rom
It's not easy like SGS2 DDD
Click to expand...
Click to collapse
U need to flash the kernel!
Sent from my Xperia Neo V running Paranoid Android NXT
Ok thx for help I fixed ..

Xperia S wont load! HELP!

i decided to unlock my bootloader on my already rooted phone to try out some new JB roms. I installed Sspeed kernel and RecoverX which was fine then I followed the instruction to install the latest PACman rom by wiping all the caches and the system in recovery before flashing the rom. Problem is I accidentally left out the flashing and went straight to reboot phone. NOW THE PHONE WILL NOT GO PAST BOOTLOADER ANIMATION.
I tried using flashtool to flash stock rom. The phone is connected in fastboot mode but will not flash! PLEASE HELP!
Many thanks in advance!:fingers-crossed:
R4x0 said:
i decided to unlock my bootloader on my already rooted phone to try out some new JB roms. I installed Sspeed kernel and RecoverX which was fine then I followed the instruction to install the latest PACman rom by wiping all the caches and the system in recovery before flashing the rom. Problem is I accidentally left out the flashing and went straight to reboot phone. NOW THE PHONE WILL NOT GO PAST BOOTLOADER ANIMATION.
I tried using flashtool to flash stock rom. The phone is connected in fastboot mode but will not flash! PLEASE HELP!
Many thanks in advance!:fingers-crossed:
Click to expand...
Click to collapse
To flash stock rom you need to be in a flashmode, not fastboot.
Ive done that few times just install any kernel via fastboot, then you will be able to go to recovery its just that recovery is kept in system partition, so you wiped all the system and recovery flash any kernel that has recovery build in, and you will be good to go
Sent from my Galaxy Nexus using xda app-developers app
gallardo5 said:
Ive done that few times just install any kernel via fastboot, then you will be able to go to recovery its just that recovery is kept in system partition, so you wiped all the system and recovery flash any kernel that has recovery build in, and you will be good to go
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
problem is i've flashed stock kernel.sin and system.sin via fastboot using flashtool....still the same.:crying:
R4x0 said:
problem is i've flashed stock kernel.sin and system.sin via fastboot using flashtool....still the same.:crying:
Click to expand...
Click to collapse
Download stock rom and flash everything not just kernel or system.
HooLIMAN87 said:
Download stock rom and flash everything not just kernel or system.
Click to expand...
Click to collapse
I'm such a noob lol. I mistaken the vol down for up thats why it didnt flash in the first place.
Thanks all! I knew I can find help here:laugh:

[Q] Help Xperia S /system formated

Hello everyone
In Progress of flashing a new rom, i've done something very stupid.
I had factory reset my Phone and formatted /system and then i accidentally
reboot my phone. My Phone stuck now on the Sony Boot Logo and i don't now what i
should do now? I have my bootloader UNLOCKED.
Can i use the Sony Update Tool or what can i do?
Please help me
PS: Sorry for my bad english
if u still can go to recovery you can flash your rom again, if not use flashtool
mharckk said:
if u still can go to recovery you can flash your rom again, if not use flashtool
Click to expand...
Click to collapse
And if you dont't have a recovery installed, you can also flashing a kernel with recovery and booting into it.
Che4ter said:
Hello everyone
In Progress of flashing a new rom, i've done something very stupid.
I had factory reset my Phone and formatted /system and then i accidentally
reboot my phone. My Phone stuck now on the Sony Boot Logo and i don't now what i
should do now? I have my bootloader UNLOCKED.
Can i use the Sony Update Tool or what can i do?
Please help me
PS: Sorry for my bad english
Click to expand...
Click to collapse
Pull your battery. Put it again. Do a key combination to go into recovery mode. Restore your backup or flash that rom again. Simple.
phixom said:
And if you dont't have a recovery installed, you can also flashing a kernel with recovery and booting into it.
Click to expand...
Click to collapse
Offcourse he has recovery installed as he was flashing the rom.
Sent from my GT-I9300 using Tapatalk 2
Noob-superuser said:
Pull your battery. Put it again. Do a key combination to go into recovery mode. Restore your backup or flash that rom again. Simple.
Offcourse he has recovery installed as he was flashing the rom.
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
It is dangerous to open XS's back...
Just press power + vol up until 3 vibrations.
If you really can't go into recovery, use flashtool to flash stock ftf.

[Q] Stuck on karnel load, wrong rom

Similar case:
http://forum.xda-developers.com/showthread.php?t=1689420
So I made a stupid mistake but know where. This is not my first time to flash roms and karnels, but don't know where did I go wrong...
So here goes the story:
I had Racing Bean for a while and then I decided to change so I wanted to try the new Kit Kat
http://forum.xda-developers.com/showthread.php?t=2545367
First I went back to stock 0.587 (because I never did before) and then I forgot to install recoveryX.
After that I flashed the karnel (nAa karnel)
So now I can't go in to recovery to install the rom and wipe the system
I tried.
Volume Down
Volume Down + Home
Home + (Connecting the cable)
Volume Up + Connecting the cable
Maybe something more but can't remember
What should I do? Thanks in advance
ARC S (LT18i)
BTW: When the legacy logo loads a purple light blinks but nothing...
Well if you have flashed the kernel you should be able to boot to recovery... Turn on phone...as soon as logo comes keep pressing any button... The purple led will change to blue and it should take you to recovery...
Sent from my Xperia Neo V using Tapatalk 2
Attitude.SSJ said:
Well if you have flashed the kernel you should be able to boot to recovery... Turn on phone...as soon as logo comes keep pressing any button... The purple led will change to blue and it should take you to recovery...
Sent from my Xperia Neo V using Tapatalk 2
Click to expand...
Click to collapse
It didn't want to but I am back to stock...
Thank you, but one quick question while you are here....
I want to install Legacy Xperia, what karnel should I flash?
After I flash it I go to recovery and Install the zip (wipe the data, already coppied all the files) right?
rema996 said:
It didn't want to but I am back to stock...
Thank you, but one quick question while you are here....
I want to install Legacy Xperia, what karnel should I flash?
After I flash it I go to recovery and Install the zip (wipe the data, already coppied all the files) right?
Click to expand...
Click to collapse
Read the ROM thread, it's all there. These questions have been repeated so many times I lost count of the number of times I answered them.
僕のLT18iから送られてきた
rema996 said:
It didn't want to but I am back to stock...
Thank you, but one quick question while you are here....
I want to install Legacy Xperia, what karnel should I flash?
After I flash it I go to recovery and Install the zip (wipe the data, already coppied all the files) right?
Click to expand...
Click to collapse
Usually kernel is inside the Rom (zip file) when u download, u should go with that kernel for best compatibility.
copy the zip file to sdcard
extract the zip to get .img file, flash your device with that file.
enter the recovery and install the zip file u copied
wipe cache, data ...
install gapps if u want
wipe again
reboot
popthosegaskets said:
Read the ROM thread, it's all there. These questions have been repeated so many times I lost count of the number of times I answered them.
僕のLT18iから送られてきた
Click to expand...
Click to collapse
I didn't know that it's inside the zip
motlanvamaimai said:
Usually kernel is inside the Rom (zip file) when u download, u should go with that kernel for best compatibility.
copy the zip file to sdcard
extract the zip to get .img file, flash your device with that file.
enter the recovery and install the zip file u copied
wipe cache, data ...
install gapps if u want
wipe again
reboot
Click to expand...
Click to collapse
The problem is I can't enter the revovery mode, it's really strange..
The logo starts to load (vibrates) and the purple light blinks and it's gone, so now stuck again.....
Thank you all
Never had this case.... I will wait for a while because of the first boot but didn't have this problem before.....
BTW: I use the V. Down to go in recovery (CWM 5 installed before this!!)
EDIT:
1.1 (optional): If the device is not booting, reboot to bootloader again and run:
fastboot erase system
fastboot erase userdata
Should I try this? One thing to check how do you go to bootloader on arc s (flashmod?)
rema996 said:
I didn't know that it's inside the zip
The problem is I can't enter the revovery mode, it's really strange..
The logo starts to load (vibrates) and the purple light blinks and it's gone, so now stuck again.....
Thank you all
Never had this case.... I will wait for a while because of the first boot but didn't have this problem before.....
BTW: I use the V. Down to go in recovery (CWM 5 installed before this!!)
EDIT:
1.1 (optional): If the device is not booting, reboot to bootloader again and run:
fastboot erase system
fastboot erase userdata
Should I try this? One thing to check how do you go to bootloader on arc s (flashmod?)
Click to expand...
Click to collapse
yes, you should try:
fastboot erase system
fastboot erase userdata
When i install CM11 for first time, same problem happened then I did two steps above and things worked well.
motlanvamaimai said:
yes, you should try:
fastboot erase system
fastboot erase userdata
When i install CM11 for first time, same problem happened then I did two steps above and things worked well.
Click to expand...
Click to collapse
Thank you very much you are a great help..
One more thing how do i put it in bootloader (blue light) because I need to deleate the data, right?
rema996 said:
Thank you very much you are a great help..
One more thing how do i put it in bootloader (blue light) because I need to deleate the data, right?
Click to expand...
Click to collapse
Have u tried quickIMG?
rema996 said:
Thank you very much you are a great help..
One more thing how do i put it in bootloader (blue light) because I need to deleate the data, right?
Click to expand...
Click to collapse
Turn off phone, hold down menu button and connect your phone to your PC.
僕のLT18iから送られてきた

Categories

Resources