Develop Bugs

[ROM] [DEV STOPPED] JB AOSP 4.3 alpha 1

JB AOSP 4.3 alpha 1 by LeTama​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
*** DISCLAIMER ***
I'm not responsible if it breaks your device! Don't install it if you want something stable.
*** /DISCLAIMER ***
​
Be careful, this is a very preliminary build. Backup your stuff and expect problems.
DON'T TRY TO FORMAT any unformated external USB drive/key with OTG cable, it could format internal storage instead !!!
​
Introduction
Here is my port of JB AOSP 4.3 for our Xperia S. This is a work in progress, it's currently missing few of the patches I used in 4.2.X and few things are completely untested.
Installation and downloads
You need unlocked bootloader and a working recovery.
Download installation zip from here, mirror thanks to @androidlover007 (I know, uploaded.net is not the fastest of the earth, multipload mirrors coming soon. I'm not against posting any other mirror).
Copy it to internal storage
Wipe Data/Cache
Install gapps for 4.3. Currently, we don't have "official" gapps from CM team, I used PA ones with good success.
Reboot and let the rom settle down a bit
Important: Current release has a recovery with broken offline charging, you should flash a fixed one after installing the rom to avoid any trouble. Check this post.
Kernel source code is here (branch jb-4.2-experimental).
Note: this rom flashes its own kernel that comes with TWRP recovery and last version of Boot Manager. Just use volume up/down to navigate boot manager menu and power to select if you want to go to TWRP. Don't play with Boot Manager options if you don't know what you're doing.

Status
Working:
Display / 3D (with some stuttering, under investigation)
Audio (without LPA, won't add it)
Calls / SMS / MMS / Data
Camera (Pictures / Videos)
Bluetooth
Wifi
Wifi Tethering
Sensors
GPS
Hardware video encoding/decoding
Offline charging
NFC
SELinux
WIFI EAP. (untested, can anyone confirm ?)
Not working:
FM radio: I won't implement it in aosp with current proprietaries as they will conflict with 4.2+ bluetooth.
HDMI.
Auto brightness (disabled now)
And probably more, let me know
Missing
TRIM Support
Known issues
1080p video stuttering (waiting for new Sony firmware)
voip audio disabled, voip is going through normal channels (waiting for new Sony firmware)
Wifi direct disabled (waiting for new Sony firmware)
subway surfers game is not working
SuperSU not working. You can flash a working one here.

Changelog
2013/08/07 - Alpha 1
- SELinux added
- Media server crash on audio notification fixed
- Move to SD fixed
- Ril crash on some mvno fixed.
- SuperSU updated to 1.51
- 12 and 9M camera size
- Panorama fix
- Google backup selected as default
- EAP finished
2013/08/03 - Alpha 0

FAQ
Can I flash any kernel with it ?
No. This rom is using Nexus 4 proprietaries and requires matching video drivers. You must use embedded kernel.
Something is not working, crashed, whatever, how can I help ?
Please provide logs! Description is not enough, I need at least logcat and ideally dmesg. If phone reboots, go to recovery, get the /proc/last_kmsg file and provide it to me.
Dev options are missing ?
No, they're just hidden, it's now the default behavior in 4.2.x. To enable it, go to settings / about and tap multiple times on build number, menu will be enabled and stick after reboot.

* reserved, now you can go on *

Great And Fast Work.

Omg you are fast man
Sent from my LT26i using xda premium

Is there need to report bugs or it is too early for such thing?
Anyhow, I'm downloading right now, will report back with observations.
Log:
- Booting seems fine, some glitches but nothing to worry about...
- Font is kinda different, I like it, very much. It is even more close to Helvetica and for me it is very nice typeface porn
- Touch vibration is kinda shorter, more direct but weaker.
- Developer tools are updated with very nice features, everything mentioned at Google I/O 2013.
- Animations are smoother. It's not that "new ROM" smoothness, transitions between screens appear like constant 60fps, without that lag that sometimes occurs regardless on hardware.
- There are some differences in first time configuration, nothing radical but still...
- Google Play Store wont open, close it and relaunch and then it will show TOS. It lags a bit.
- Is it me or DPI is kinda different? Everything seems to be bigger. Icons in drawer, Google play apps... SystemUI feels kinda same. EDIT: 320dpi.
- AOSP keyboard icon is different. RAM usage is same, no lower usage or anything special. Available RAM - 622 MB.
- Touch responsivness seems a bit better.
- Texdroider DPI (DPI changer) doesn't work. On 4.2.2 it would work with OpenSEMC, but it's not the case on 4.3.
SuperSU does not work (no su binaries), this ROM is unrooted. To root it again do the following:
Download SuperSU 1.51 from here
Move it to your root folder on your phone
Turn your phone off, boot it into recovery
flash that zip you copied to your root folder "SuperSU 1.51"
Reboot to system.
Voila!

damn your way ahead of me
letama
Click to expand...
Click to collapse
Damn your way ahead of me,aw whell , ill try in 4.4 xD
PS did you use the google 4.3 source code or did you use Sonys Aosp source code... or did you port this from XZ??
still learning....

i love that warning about formatting otg drives d:

great
mirhl said:
i love that warning about formatting otg drives d:
Click to expand...
Click to collapse
i am so happy,now a android 4.3 developing for our xperia s.hope it is soon capable of daily use.THANK YOU to all developers :laugh: i love yall very much

switzerland92 said:
Is there need to report bugs or it is too early for such thing?
Click to expand...
Click to collapse
Yes, please do. I didn't run it for a long time, I really need feedback.
Envious_Data said:
Damn your way ahead of me,aw whell , ill try in 4.4 xD
PS did you use the google 4.3 source code or did you use Sonys Aosp source code... or did you port this from XZ??
still learning....
Click to expand...
Click to collapse
This is google 4.3 code, with my 4.2.x device tree and proprietaries. I'll take a shot at merging 4.3 kernel drivers soon.
mirhl said:
i love that warning about formatting otg drives d:
Click to expand...
Click to collapse
Burnt once! I didn't include 4.2 patch. Code changed, so it could work properly, but I have to test it first with a good backup

Ty bro
letama
Click to expand...
Click to collapse
hopefuly soon i will know as much as you
lets see if sony make a 4.3 or a 4.4 (sony themed)
i will definatly try to port that to an older device

Hey awesome letama! Are you going to release the ROM for loop? Tried your script but it didn't work. Thanks

letama said:
Yes, please do. I didn't run it for a long time, I really need feedback.
Click to expand...
Click to collapse
To keep it on one place and as organized as possible I'll edit my post with new info for you and others that are afraid to flash it right away
EDIT: Well, I don't have root. SuperSU says I must manually re-root and I must, quote, "consult the relevant forums for your device" which in this case is your thread

Someone please mirror i can never use uploaded.net
Sent from my 4.2.2 PAC powered Xperia S via Tapatalk

Noob question: Can adreno 220 ever support OpenGL ES 3.0 ?

skifyr123 said:
Hey awesome letama! Are you going to release the ROM for loop? Tried your script but it didn't work. Thanks
Click to expand...
Click to collapse
Yes, script can't work. I will upload it tomorrow, it's prepared but untested.
switzerland92 said:
EDIT: Well, I don't have root. SuperSU says I must manually re-root and I must, quote, "consult the relevant forums for your device" which in this case is your thread
Click to expand...
Click to collapse
Check first posts, known issues sections, SuperSu is not up to date in the rom. There is a link to one that can be flashed and works...

I'm going to download as soon as I get home. About performance, similar to 4.2.2?
Enviado desde mi Xperia S usando Tapatalk 4 Beta

Ben36 said:
Someone please mirror i can never use uploaded.net
Click to expand...
Click to collapse
Electricity problem here, I lost my multiupload I'll restart tomorrow.

[ROM][MOD] #FixMyOppo : CM11 w/ new partition layout. +9 GB /data

Disclaimer
I accept no responsibility if you damage your phone, lose your data or fail to attend an important meeting because of a broken phone agenda.
If you follow this tutorial DO backup. To an external sdcard or preferably a PC.
Also, continue reading if you are ok on FULL WIPING your device. You've been warned!
I take no credit at all for the ROMs and recoveries offered in this thread. They are only examples and I have no plans on maintaining them other than for personal use. Instructions to patch or rebuilds more up to date nightly builds are offered.
Special thanks to:
* CyanogenMod team
* Entropy512 and the Omni team
* Dees_Troy for TWRP
The problem
Probably you are feeling like me. This is a great device, but the storage layout is frustrating. Only 3GB for /data an 9GB for /sdcard !!!
Meaning:
- Just a few apps before the storage is full
- Google Music will not be able to download more than a few albums
The reason
Oppo decided to not have unified partition layout (/data and /sdcard do not share the same space as any other modern phone does). This is something my three years old Galaxy Nexus has!!!!
Solutions
There are a few, but without Oppo's support (meaning: repartitioning) all of them will be non standard and will limit ROM interoperability.
On this thread I will focus on three of the less dangerous solutions:
Option 1 : Use "sdcard0" (9GB) as /data, "userdata" (3GB) as "sdcard1" and the external sdcard as "sdcard0"
Option 2 : WIP : Create a volume group (LVM) using "userdata" and "sdcard0" physical devices (totalling 13GB). Use this as /data and the external sdcard1 as sdcard0. This is based on an idea by Entropy512 and I take no credit at all
Option 3 : WIP : Same as 2 plus unified partition layout (/sdcard0 on top of data). Leave sdcard1 as sdcard1 if you have it.
What you will need
Options 1 and 2 require an external sdcard. Option 3 does not (although you can still use it)
You should have installed fastboot and adb in order to flash a new recovery and do backups.
You need to use my special TWRP builds only.
Option 1
This is the easiest (but less than ideal) solution. You will have 9GB in /data and use your external sdcard as /sdcard0 (as if it was internal). the remaining 3GB will be considered as an external /sdcard1.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The trick is simple, just replace the partition table (fstab.qcom) with this one. Put it on device/oppo/find7/rootdir/etc/fstab.qcom and brunch find7. Additionally rebuild TWRP with a similarly modded twrp.fstab. Alternatively you might want to rebuild the boot.img ramdisk, build for another ROM (OMNI is a great option too) OR use the downloads below:
* CM11 with the new parition layout (source built on 20140626)
* TWRP with similar partition layout (although external_sd is still external_sd and internal_sd is sdcard0).
Instructions:
1) Use your existing standard TWRP to do a nandroid backup to your external sdcard
2) Reboot into your bootloader (adb reboot bootloader or hold on your vol up and power button)
3) Flash this special TWRP image (fastboot flash recovery twrp-find7a-swapped-data-sdcard.img)
4) Reboot into recovery (power off, hold vol down and power button)
5) Click on Wipe, Advanced Wipe. Check Dalvik Cache, System, Data, Cache, Internal_sd, Android Secure (pretty much everything EXCEPT external_sd)
6) Flash the provided CM11. BE SURE YOU ARE USING THE CUSTOM TWRP IMAGE.
7) Reboot
8) Profit
Options 2 and 3
These are still WIP.
Extras
After flashing the ROM you would like to flash some extras:
* PA_GApps : DO not use anything other than MICRO MODULAR PA package, as the others will overwrite camera files will Google camera and it is broken.
* OnePlus One CyanogenMod 11s Camera : Works nicely

Rolling back
Just flash the original TWRP.
Go to Wipe menu, full wipe every partition (except external sd)
Flash whatever ROM you want.
Done

Reserved 2

FixMyOppo
alienmind sir,
amazing outstanding...so a quick question CM11 is now ready for the FIND 7 QHD X9077& X9076..didn't see that anywhere
i have a thread on oppo forums http://www.oppoforums.com/threads/free-our-memory-movement.17302/
trying to convince oppo to deal with this very issue of the 3gb app issue i have informed the members after being informed by a member,(rpcherrera),about this link,so just need confirmation this will work before flooding your thread with willing participants...

I can't grant the ROMs provided will work with the QHD model as I don't have one to test it. In principle this little hack or a very similar one should work though if you patch any QHD image with the provided fstab or something very similar. Although I accept test devices if you are willing to donate ;-]
Enviado desde mi Find7 mediante Tapatalk

fixmyoppo
thank you for your reply,if i had a spare £450 lying about i would gladly donate one to you,if you would like me to put the feelers out on the thread for the members to donate to you for this purpose i will do so...no problem
it's a shame there is no working development for the QHD yet...i know @coldbird is working on some and i can't wait till he has a working rom,(miui), or fix for this issue
so i can update my thread and let the users know this is for find 7a only...thank you
and please let me know if you want me to help you get donations from my thread,when i hear back from you about it,i will start the ball rolling
:laugh:

Don't worry about the donation thing, I was just kidding. Although the images provided are not directly flashable, as soon as you have CM11 support for the QHD, the hack above should work - given that you rebuild with the provided fstab.
Enviado desde mi Find7 mediante Tapatalk

fixmyoppo
yeah things are looking slow for the find 7 QHD,i will probably have my 1+1 by the time this device gets a stable custom rom,plus i am also looking at the VIVO XPLAY 3S another great device...unfortunately i doubt there will be any custom roms made for that device i doubt the source code will be released for it....also the nubia X6 http://liaow.com/nubia-x6-128g-white.php is another nice device that may never see a dev get their hands on the source code to customise...a shame really but thems the breaks i suppose,
once again thank you for all your hard work up till now and in the future
:good::good::good:

mrsynister1971 said:
yeah things are looking slow for the find 7 QHD,i will probably have my 1+1 by the time this device gets a stable custom rom,plus i am also looking at the VIVO XPLAY 3S another great device...unfortunately i doubt there will be any custom roms made for that device i doubt the source code will be released for it....also the nubia X6 http://liaow.com/nubia-x6-128g-white.php is another nice device that may never see a dev get their hands on the source code to customise...a shame really but thems the breaks i suppose,
once again thank you for all your hard work up till now and in the future
:good::good::good:
Click to expand...
Click to collapse
most devs are just getting dev units.... Ethan Chan already working on kernel for Fin7Qhd on cm so... just be patient ....

Is this persistent after an upgrade?
Want to confirm this isn't broken after installing a newer nightly

So does it work on x7096 qhd?? anyone can confirm please?
thx in advance

[ROM][LP][5.1.1_r6][LMY48B] CyanogenMod 12.1 (20150912-UNOFFICIAL) EOL

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What's Working:
Audio
Receiving and making calls
GPS
Hardware sensors (Light, Orientation, Compass, Proximity, Acceleration)
Legacy sensors / Virtual sensors (Gravity, Linear acceleration, Rotation vector)
Wifi
Bluetooth
MTP storage
HW accelerated gui
HW accelerated video
Camera
Voip video calls
BLNv10
USB/Wifi tethering
VSync
MicroSD exFAT support
zRam
F2FS support for /data partition
Known issues:
Video recording at 720p quality may cause a force close of Camera app, so it's better to use 480p quality until this issue will be fixed
What's not working:
You tell me
Installation Instructions
First you will need to download the modified recovery from Here (Don't flash it!!)
Make a Backup as usual to your phone stuff like apps, Whatsapp conversations ecc....
Backup your internal sd content, because all its content will be lost so make sure to backup everything like photos, videos ecc....(you can copy the full content on a pc or inside a new folder of your external sd)
Now Reboot inside CWM or TWRP recovery which not includes new partition assignments
Make a Nandroid backup of your entirely ROM and backup it on the external sd
Install the new one that includes new partition assignments
Make a Reboot Recovery (To reboot inside the new one)
Make a wipe data/factory reset
Go to "mounts and storage" menu and select format /system,then select "format /data and /data/media"
Now you can Download the ROM from the Downloads section under this post
Once you downloaded plug the device on the computer , then mount USB Storage.
If you finished copying your files than you're free to install the ROM now
Update Instructions
Download the latest build CM build
Flash ROM using recovery
Flash Gapps
Wipe cache,dalvik cache
Reboot
Enjoy!
Downloads:
cm-12.1-20150912-UNOFFICIAL-ancora.zip
MD5: fa958a6bb8083d469fd9ca8d912a90bf
Minimal GApps
Credits:
Christopher83: For the Kernel Sources
arco: For all the work done here on the ancora,ariesve community and for the ancora device sources
CyanogenMod: For CM12 sources
XDA:DevDB Information
CyanogenMod 12.1 for Galaxy W aka ancora, ROM for the Samsung Galaxy W I8150
Contributors
nilac8991, sir mordred
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Last modified CWM Recovery for LP provided by arco or the one made by lafactorial
Version Information
Status: Nightly
Stable Release Date: 2015-09-12
Created 2015-06-13
Last Updated 2015-09-12

Reserved

Reserved

You want it, and here it is guys
This is succesfull compiled build but i don't know if everything is working fine, so before flashing the build make sure to make a backup first because you know i don't own the device.
If someone flash the ROM please write here a post if everything is ok, in order to take away the test mark from the thread name
Enjoy it
Regards
nilac

Wow, amazing, you will continued development this rom?)

[QUOTE=Maximk
Yes , and i hope

Thanks
Thank you so much
We are waiting your new works.

nilac8991 said:
You want it, and here it is guys
This is succesfull compiled build but i don't know if everything is working fine, so before flashing the build make sure to make a backup first because you know i don't own the device.
If someone flash the ROM please write here a post if everything is ok, in order to take away the test mark from the thread name
Enjoy it
Regards
nilac
Click to expand...
Click to collapse
Many Thanks, Nilac

Match Gapps
Before installing gapps ok but after installing "gapps-5.1.x-20150404-minimal-edition-signed" became slow response (application WPS office little bit hard to install - can be my connection also)

thanks bro.
before i'm flashing this rom, may i ask about Voip video calls . its mean we can vcall on phone app ? or still with 3rd party app (hangout/skype/tango/..etc) ? i know this issue from old cm version till now. but a just ask bro..
"My WONDER IS STILL ALIVE"

kaila29 said:
before i'm flashing this rom, may i ask about Voip video calls . its mean we can vcall on phone app ? or still with 3rd party app (hangout/skype/tango/..etc) ? i know this issue from old cm version till now. but a just ask bro..
"My WONDER IS STILL ALIVE"
Click to expand...
Click to collapse
Nope just from third party apps

RR or original CM12.1?
Anyone who tried both could tell me which is more smooth/stable, RR or this CM12.1?

Junderbalt said:
Anyone who tried both could tell me which is more smooth/stable, RR or this CM12.1?
Click to expand...
Click to collapse
If possible, without Gapps installed (logged in Google account), both of them are stable enough.

issue
What about the contacts? there are some issues about the contacts being stored and poof gone.
any feedback?

temenalie said:
If possible, without Gapps installed (logged in Google account), both of them are stable enough.
Click to expand...
Click to collapse
So if I want to use it regularly on a daily basis with Gmail logged in, do I have no choice but to revert back to CM11?
Thanks for your previous reply and thanks in advance!

Junderbalt said:
So if I want to use it regularly on a daily basis with Gmail logged in, do I have no choice but to revert back to CM11?
Thanks for your previous reply and thanks in advance!
Click to expand...
Click to collapse
depending on your daily usage. if you think CM12 is not stable yet, of course you do not have to keep it, you can revert to CM11 back anytime you want.

Root
how to make a root?
thank you

puamik said:
how to make a root?
thank you
Click to expand...
Click to collapse
Activate developer option by tap build number several times. Build number located under About Phone
Then go to developer option, root access, and choose apps only.

Cm 12.1 (20150621)
New NIGHTLY is available for Download !
I don't provide Changelog for the changes only if they are very important as per device changes
Enjoy !
P.S If you notice that the build date from Settings is the old one, yeah it's my fault, i forgot to regenerate a new build.prop

nilac8991 said:
New NIGHTLY is available for Download !
I don't provide Changelog for the changes only if they are very important as per device changes
Enjoy !
P.S If you notice that the build date from Settings is the old one, yeah it's my fault, i forgot to regenerate a new build.prop
Click to expand...
Click to collapse
NIGHTLY, good to know we have Nightly stage right now. Thanks Nilac

[Q&A] [ROM][GT-N7100][MARSHMALLOW][6.0.1][CyanogenMod 13.0] [UNOFFICIAL]

[SIZE=+2]This thread has been created
for
Questions & Answers/Troubleshooting[/SIZE]​[SIZE=+2]Specific to[/SIZE]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[ROM][GT-N7100][MARSHMALLOW][6.0.1][CyanogenMod 13.0] [UNOFFICIAL]
Please feel free to share issues, questions and offer help
Please keep discussion focused, on the topic described in the OP
2. Post Frequently asked questions

FAQ
Q1: Is this ROM rooted?
Yes, CyanogenMod is rooted by stock, but you must enable root in developer options.​Q2: Does this ROM support Agni?
Yes: Agni thread. Don't report bugs, if you installed Agni.​Q3: Is the new Gello browser included?
Yes, it's in the ROM.​Q4: Do I need to do a clean flash, if I update the ROM?
No, only wipe cache and dalvik-cache.​Q5: Is Doze enabled?
Yes, it is.​Q6: Will there be a official version of this ROM?
No​

Nice :good:
Why I cant disable CM sms messaging app? I'm using Google Messenger. I believe some weeks or months back I was able to disable it (and I still am able to disable Cm browser app, email and other system apps)

Hi,
you should be able to disable it via SDMaid. It can't be disabled via inbuilt manager because CyanogenMod only allowed to freeze some system apps. Messenger can't be freezes.
Thanks for using Q&A!

Hey, users reported there is no Gello in latest build, but how about videos in Chrome?
We know, or I do, that build 28/04 is does not support videos in Chrome. Uhm, not sure if I am supposed to be able to ask this but, @Trafalgar Square will you do any clean buid soon? It may fix the minor bugs we have now. Thanks.

Hi. Can anyone give a small step-by-step instruction set on how to switch to aggressive doze?
Thanks

hello,
I decided to install your ROM on my Note II.
Im coming from 4.4.2 official.
I just rooted and installed latest TWRP,backuped everything with Titanium.
Do I just wipe and install your ROM and GAPPS?
Do I need anything else,like change partition sizes and stuff?
Or do I just shoot?
Thanks in advance!

Promhtheas2000 said:
hello,
I decided to install your ROM on my Note II.
Im coming from 4.4.2 official.
I just rooted and installed latest TWRP,backuped everything with Titanium.
Do I just wipe and install your ROM and GAPPS?
Do I need anything else,like change partition sizes and stuff?
Or do I just shoot?
Thanks in advance!
Click to expand...
Click to collapse
This is exactly what you have to do:
- root your device, use CF-autoroot by Chainfire
- flash TWRP 3.0.2.0 (latest, find it on their website)
- wipe EVERYTHING
To do so go to settings and check rm-rf instead of formating; after that wipe data and type "yes". go to advanced wipe and wipe cache, dalvik, internal, system (everything you see there. USB-otg and micro sd are not required, but i always wipe sd because i have nothing important on it).
- reboot device in recovery and if you want to be 100% sure, wipe again everything with rm-rf ON (reboot again in recovery)
- now you can connect your device to PC and copy the rom zip and gapps zip to your device,(i copy them on sd, it doesn't really matter).
- disconnect your device and flash tge rom zip
- when that's done DONT wipe dalvik/cache
- flash gapps
(make sure you don't flash google camera, it's not working)
- now you CAN wipe dalvik and cache
- reboot into system
Enjoy the best CM 13 ROM.
Now, if you want to tweak your device a little bit more you can install from play store Greenify (in greenify go to settings and enable Aggressive Doze) and L Speed. There is a thread on xda with L Speed. The maintainer explains there what L Speed does and how it works.
I use them and it works better.
@Trafalgar Square did you notice a slower charge with BeansKernel? I get like 1100 mAh..
---------- Post added at 05:24 PM ---------- Previous post was at 05:15 PM ----------
gciochina said:
Hi. Can anyone give a small step-by-step instruction set on how to switch to aggressive doze?
Thanks
Click to expand...
Click to collapse
Install Greenify and go to it's Settings. You will see there Aggressive Doze unenabled, so you have to enable it.
In 9 hours my battery went from 45% to 44%. :good:

Hi Andrew,
Thanks for the reply..I just did a factory reset and installed the ROM and full GAPPS..everything seem to work so far,including Camera.I will test Greenify and L Speed too.

Promhtheas2000 said:
Hi Andrew,
Thanks for the reply..I just did a factory reset and installed the ROM and full GAPPS..everything seem to work so far,including Camera.I will test Greenify and L Speed too.
Click to expand...
Click to collapse
Google Camera? Weird, it doesn't work here

Promhtheas2000 said:
Hi Andrew,
Thanks for the reply..I just did a factory reset and installed the ROM and full GAPPS..everything seem to work so far,including Camera.I will test Greenify and L Speed too.
Click to expand...
Click to collapse

adoptable storage is working?
sd card as internal memory?

huyhung040106 said:
adoptable storage is working?
sd card as internal memory?
Click to expand...
Click to collapse
Not for me. But that might be because of my SD.

Reptilez_DK said:
Not for me. But that might be because of my SD.
Click to expand...
Click to collapse
That just doesn't work, it's not only you.

huyhung040106 said:
adoptable storage is working?
sd card as internal memory?
Click to expand...
Click to collapse
No, it will never work.

Hey, I have a problem with WhatsApp, when I restore the backup, it failed

roy_29_11 said:
Hey, I have a problem with WhatsApp, when I restore the backup, it failed
Click to expand...
Click to collapse
Please give proper permissions for WhatsApp.
Thanks for using Q&A!

With file manager?

No, in settings.
Under Apps.

Hey i have a problem after flashing cm13 i stuck in bootloop i need help

(Rom)PixelExperienceMod_deiwid63 Oreo 8.1

PixelExperienceMod_deiwid63
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I did a little mod for PixelExperience for me and I added
1.PriimaKernel-LOS-07022018_2156 - Very good battery
2.Root Magisk 1.5.3
3.2api for GoogleCam
4.Fix dialer problem
5.Adaway apk
6.Changed phone name to improve compatible with Play Store (GalaxySamsung7EDGE)
7.I have also added scripts to decrease CPU cores in beta Test - It can be activated in the kernelAdiutor settings(Activation at your risk -Unstable-)
(if you see problems turn it off)
Rom works very well no problem with Google applications.
All changes are added to the Rom PixelExperience_gemini-8.1.0-20180207-1435-OFFICIAL
Thank you for Rom dev "Dzienny" everything and its merit that brought us this beautiful CustoRom - I have only contributed with small changes.
Seen so many problems that are created by installing kernel and Root reported by many users.
TVRP ZCX-TWRP_MI5_Gemini_Patched
http://www80.zippyshare.com/v/c18Nx3dx/file.html...
Rom Mod_by_deiwid63
https://mega.nz/#!hldyBA7J!JotPhLcH7tezlFqC-tNOTrFqpZY49JHT0-7DXLsudu8...
firmware_miui_8.2.1_dev_global
http://www108.zippyshare.com/v/dCXEeOyw/file.html...
FixYouTube Resolution 2160
http://www2.zippyshare.com/v/djqvYhx4/file.html...
build.prop_Stock Mi5
http://www39.zippyshare.com/v/YkwTGnT8/file.html...
Phonograph Music Player
https://play.google.com/store/apps/details?id=com.kabouzeid.gramophone...
YouTube
https://www.youtube.com/watch?v=ybZr0or4Ao0&t=11s
Installing: Use only TWRP Mod and Frrmware here:
1.Format data
2.vipe system,data dalvik cache - If you install from OTG format memory Internal.
3.istalling firmware_miui_8.2.1_dev_global
4.installing Rom_Mod_deiwid63
If someone has trouble with (GoogleCam) front camera must disable HDR +
@deiwid63

Why you create a separete topic?

Friend the mega link is asking for the encryption key hit the link please

This rom or xiaomi.eu for battery and game performance ? i am using xiaomi.eu rn

Viston96 said:
Why you create a separete topic?
Click to expand...
Click to collapse
To avoid creating inconveniences:good:

jackjt3 said:
Friend the mega link is asking for the encryption key hit the link please
Click to expand...
Click to collapse
link correct:good:

Today I'm using AEX 8.1 need to change twrp to install this rom or just give the wipes and install normal friend

jackjt3 said:
Today I'm using AEX 8.1 need to change twrp to install this rom or just give the wipes and install normal friend
Click to expand...
Click to collapse
You can try but I did a clean installation as I described. I recommend installing from OTG:good:

So my friend the correct is to install the twrp that you made available, format data, system, date, davilk cache and also I will format the internal to stay a clean installation, then copy back the rom files and install miui global zip and then the zip pixel, because in your tutorial this is a little confusing the installation process please clarify please thank you.

jackjt3 said:
So my friend the correct is to install the twrp that you made available, format data, system, date, davilk cache and also I will format the internal to stay a clean installation, then copy back the rom files and install miui global zip and then the zip pixel, because in your tutorial this is a little confusing the installation process please clarify please thank you.
Click to expand...
Click to collapse
Then I'll write to you as I did
1. I installed the TWRP Patched
2. Format data
3. wipe cache data, date, system, cust e (internal memory because I have a flash drive)
4. Using OTG with a flash drive I installed PixelExperienceMod_deiwid63
If you do not have the flash drive after formatted internal memory move ROM to internal memory and install, or do not format the internal memory.

Nice to see this. I love the pixel experience, but the last build is really buggy with the darkness kernel. You have added priima kernel again. This one has resolved the Google app FC which occurs in the original pixel experience rom?

Thanks,
This ROM is excellent. I've been using LOS15.1 for a while and your mod of PE with Priima kernel simply destroys LOS in battery life. No FC of the Google app as far as I can see.
I'm interested in what the rationale is behind masquerading as a Samsung Galaxy 7 Edge?

DiggyTheWombat said:
Thanks,
This ROM is excellent. I've been using LOS15.1 for a while and your mod of PE with Priima kernel simply destroys LOS in battery life. No FC of the Google app as far as I can see.
I'm interested in what the rationale is behind masquerading as a Samsung Galaxy 7 Edge?
Click to expand...
Click to collapse
I wrote because I changed build.prop to Samsung S7 Edge on the first page - You can download and install Mi5 stock build.prop.

Error installing provided firmware 8.2.1 dev global. So I stick with 8.1.4

teddymilk said:
Error installing provided firmware 8.2.1 dev global. So I stick with 8.1.4
Click to expand...
Click to collapse
Which TWRP? You have installed TWRP of the first page and which installation error?

When i take a selfie, the photo appears green. Why?

Fix Front Camera GoogleCam
Sasy969 said:
When i take a selfie, the photo appears green. Why?
Click to expand...
Click to collapse
Before installing, read what I wrote in the first post. Solution and in the first post. :good:
This problem affects Google Camera, not Camera, which is included in the ROM - Next time you have to provide precise information.THX:good:

arek78 said:
Before installing, read what I wrote in the first post. Solution and in the first post. :good:
This problem affects Google Camera, not Camera, which is included in the ROM - Next time you have to provide precise information.THX:good:
Click to expand...
Click to collapse
I have never had this problem with the normal ROM using always the Gcam, but i will use your solution, thank you!

Sasy969 said:
I have never had this problem with the normal ROM using always the Gcam, but i will use your solution, thank you!
Click to expand...
Click to collapse
Unfortunately problem of the kernel not Rom - Just deactivate HDR + in the front GoogleCamera and return colors.

arek78 said:
Unfortunately problem of the kernel not Rom - Just deactivate HDR + in the front GoogleCamera and return colors.
Click to expand...
Click to collapse
Done, thank u