Develop Bugs

XDA 2s Wifi Guide anyone?

Hi guys, I recently destroyed my XDA2 and got a 2s on the insurance
Bluetooth on WM2003 SE if fair poor, but I managed to upgrade the stack thinger to 3900..... so I'm not completely XDA illiterate.
However, the wifi baffles me! I have access to an unsecured wireless network with internet access, and my 2s will connect to it. When I go on the the internet on my XDA, even with wifi connected it still tries to connect GPRS to use the internet. If I keep clicking cancel, it will load the page (presumably through the wireless network's internet access).
It has become clear that I have no idea what I'm doing with regards to networking. Could someone post a quick guide as to how to set up the wifi (from scratch) so that when it finds an unsecured network it will automatically use it for the internet.
Sorry if there's already a thread on this but I really can't find it. Cheers guys
-Mike

just what i need as well, i have just bought a wifi router so i can use the internet on my xda2s.
using the wireless manger -> wireless LAN manager i get:
STATUS: connected to network
SSID: NETGEAR
TX RATE: AUTO
MODE:INFRASTRUCTURE
CHANNEL 11
BSSID: 00-09-5B-D7-DC-2A
MAC: 00-09-2D-0B-C0-A6
but even when i pull the Ethnet cable (forgot how its spelt) out of the back of the router it still stays connected. so im thinking its more my PC than the xda. the thing is the router came with no software so i have no idea if its connected properly. when i pull this Ethnet cable out of the wifi router o get network cable unplugged. The network card is Broadcom 440x 10/100 Integrated Controller. Which I have never used.
if anyone has a any ideas it would stop me pulling my hair out.
Sorry to hijack this thread

mike freegan said:
However, the wifi baffles me! I have access to an unsecured wireless network with internet access, and my 2s will connect to it. When I go on the the internet on my XDA, even with wifi connected it still tries to connect GPRS to use the internet. If I keep clicking cancel, it will load the page (presumably through the wireless network's internet access).
-Mike
Click to expand...
Click to collapse
Mike, I dont think the wifi first and GPRS next works. It doesnt work properly on mine either. If I try a internet access via gprs and a local wifi is readily available, the system does not automatically switch to local wifi.....I think this could be a microsoft issue than a xda issue.

robboy said:
but even when i pull the Ethnet cable (forgot how its spelt) out of the back of the router it still stays connected. so im thinking its more my PC than the xda. the thing is the router came with no software so i have no idea if its connected properly. when i pull this Ethnet cable out of the wifi router o get network cable unplugged. The network card is Broadcom 440x 10/100 Integrated Controller. Which I have never used.
Click to expand...
Click to collapse
when u pull out the ethernet cable from the back of the router, can you still surf the net from you xda or PC?? that seems odd. So either you are not connecting to "your" own router, or someone else has a same router with unsecured setup and you were locked onto their service....if you follow what I mean. what happens if you kill the power to your router? you should definitely notice that the wifi service disappear in your xda and PC.
Dont expect a router to disappear by simply unplugging the ethernet cable, if the router is powered up, it will show up on your xda and the PC although obviously there will be no internet access.....

sorry if i wasn't clear. i meant i was still receiving a signal from the wifi router. i could never use the internet on the pda
update:
i can browse my pc files wirelessly using resco explorer, using the standard file explorer i can view the pc files using \\network/c and i have finally been able to connect to activesync.
however i still can not connect to the internet.
Any ideas, from looking on this forum it seems lots of peeps are having problems with this but nobody seems to have the answer

XDA Wi-Fi Solution....It Works!!!!
Hi,
I'm new to the forum and new to XDA2i (presumably XDA2s is same!) ....
I too had many frustrations connecting the wi-fi...but now I've cracked it, here's how.......
On first very first use (or following a hard re-set) device users are prompted to choose “What do you want WLAN to connect to?” The option bullets are ‘Internet’ or ‘Work’….’Work’ should be selected, this will connect them to the nearest WLAN (if this network is WEP encrypted it should be switched to ‘Open’ rather than ‘shared’ as is often the case).
Next prompt asks for any WEP Encryption ‘Pass Key’ to be input, when doing so omit any ‘-‘ between character pairs. Normal start-up should then be completed. Once device is up and running…..
From ‘Start’ pull-down on the ‘Today Screen’ select…. ‘settings’>’connections tab’>’connections icon’>’advanced tab’>’Select Networks’> pull-down ‘My Work Network’ > ‘OK’ out of selections to save and exit.
Go to ‘Wireless Manager’ in programs, select WLAN icon from main screen (which should turn green to show active), then select mini ‘WLAN’ icon from lower toolbar to see the status of the connection, quality of signal etc.
That did it for me......
Cheers
windupmerchant

Help needed with wifi connection.....

We have a 3com wireless router at home. The laptop downstairs connects to it through a PCMCIA wireless adapter. My phone also connects to it fine, no probs at all.
However, we have a pc upstairs with no wireless on it at all. I have been told that I can use the phone to "simulate" a wireless connection to the router through its USB connection. I have tried this using the program Wireless Modem on the phone but to no avail. Windows XP keeps looking for a driver that a dont have and is not supplies on the CD that comes with the phone. Any ideas where I can get this driver from, or am I doing this just completely wrong...... :roll:
Thanks

There seems to be a growing amount of threads regarding the whole WiFi scenario.
I have experienced problems too. I have managed to configure the wifi and it picks up my belkin wireless router but it cant surf.
I am also using XP!
Your problem is slightly different to mine but I will have a go at your problem too.
GOOD LUCK!

Ok. JUst to update, i have found the drivers that install the the phone as a HTC USB Modem but im still having no luck. Im trying to simulate my phone as a wireless card to connect to my router downstairs.
Is this possible???

samething
Ive just got myself in the same situation. I have the XDA2i connected to my WIFI router fine, I can go on the WWW. Im now need to get my laptop into the loft where Im doing some work on an iriver H10 20gb (trying to construct a connection box as they arn't available until Sept!!!) I need the net access to look up pinouts on chips. I don't have a WIFI card for the laptop yet (should be here soon as on back order :evil: )
SO I want to use the PDA as a wifi card for my laptop through the usb port. How do i get the laptop to see the PDA as a network card and configured for this operation??
Cheers

[Q] Connect EVO to Wired LAN?

I have poor 3G and 4G reception at my office. Is there a way to use my USB to connect to a wired network? Thanks in advance for any guidance you can provide!

This would only work if you're on one of the newer ROMS that have the " internet pass through" option when you connect your phone this computer....
I pulled this from androidcentral..
1. Make sure your computer is connected to the Internet. Two things to check for your computer’s Internet connection. One, we recommend that you turn off your local network’s firewall. Two, if your computer connects to the Internet via PPP (e.g. Dial UP, xDSL, or VPN), Internet Pass-through will only support TCP protocol.
2. Connect the phone to the computer using the provided USB cable.
3. On the Connect to PC screen, select Internet Pass-through, and then tap Done.
4. On the message window, tap OK.
Edit: also htc sync will have to be installed on the source computer for this to work

Thank you very much for this information. I appreciate your help!

You're welcome, i hope it works for you. I've never tried it, so good luck!

Use Tethering as Lan Modem Connection?

I am trying to use my not just a hot spot tethering location, but as the internet access portal for my wireless lan. This way I can use multiple devices and not have to manually connect and reconnect to the phone for tethering. From the reading I've done, the best way is to connect the phone to the router through USB and set up USB tethering on the phone. Am I on the right path? Has anyone else done this? What kind of router do I need to pull this off?
TIA

tethering to a home router
colorchange said:
I am trying to use my not just a hot spot tethering location, but as the internet access portal for my wireless lan. This way I can use multiple devices and not have to manually connect and reconnect to the phone for tethering. From the reading I've done, the best way is to connect the phone to the router through USB and set up USB tethering on the phone. Am I on the right path? Has anyone else done this? What kind of router do I need to pull this off?
TIA
Click to expand...
Click to collapse
Hi i was able to do this once. it worked great. i reset my router and somehow i cant the right settings again. heres what i did. connected mobile hot spot to computer via USB, i then bridged the connection with my Ethernet adapter. i then plugged a network cable to my routhers wan port (input) my router has a custom dd-wrt firmware. and i was able to leave hotspot connected to pc and share it out my eithernet port to my router, at that point my router would throw the signal to the air. unfortunately for me i for got my routers admin password, so when i reset the router to default i lost the settings that made it work. i haven't found them again. it works and it works well. if you have any luck let me know. i hope some of the info helps

[Q] Share internet via usb c ethernet adapter

Hi,
Does anyone know if you can share mobile data via usb c ethernet? I have a router that has 2 wan ports and would like to set up the note 10 + 5g as a failover connection. I have the tmobile version. I plug it into my router and the activity lights light up, but no data is being received. THe option to turn on usb tethering is grayed out. Any assistance is appreciated.
Thank you

What type of router do you have?

dwojr said:
What type of router do you have?
Click to expand...
Click to collapse
I have a trendnet TEW-829DRU. I know it's overkill for a home network.
https://www.trendnet.com/products/business-router/ac3000-tri-band-wireless-gigabit-dual-wan-vpn-smb-router-TEW-829DRU

blakkheartt12 said:
I have a trendnet TEW-829DRU. I know it's overkill for a home network.
https://www.trendnet.com/products/business-router/ac3000-tri-band-wireless-gigabit-dual-wan-vpn-smb-router-TEW-829DRU
Click to expand...
Click to collapse
I dont believe it's overkill whatsoever. I had an asus router not too long ago. When I attatched it to the router and I turned on USB tether, it automatically detected that it was a modem. I was able to share my internet connection thru the router and broadcast the signal. As I understand it this is what your end goal is?

Yeah. Unfortunately the USB cannot be used to share a mobile connection. When I have the ethernet dongle plugged into the phone, usb tether stays greyed out. When I connect it to the WAN 2 port, the ethernet option stays greyed out. But I connect it to an open port the ethernet option becomes active and I can receive a data connection to surf on the phone.

As much as i know it's not possible to share internet via USB. If I'm wrong please let me know.

This will be possible soon: https://www.androidpolice.com/2020/...rives-in-latest-android-11-developer-preview/ although not sure if it will come to the Note 10+ and if so when.

Doesn't Settings>Connections>Mobile Hotspot and Tethering>USB tethering do the job?

Sprov said:
Doesn't Settings>Connections>Mobile Hotspot and Tethering>USB tethering do the job?
Click to expand...
Click to collapse
Yeah but when you have a USB ethernet dongle USB tethering is greyed out.

What I did was to get one of these: https://www.amazon.ca/gp/product/B01N5RCZQH/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1 and use it in client mode. Works perfectly.