I have poor 3G and 4G reception at my office. Is there a way to use my USB to connect to a wired network? Thanks in advance for any guidance you can provide!
This would only work if you're on one of the newer ROMS that have the " internet pass through" option when you connect your phone this computer....
I pulled this from androidcentral..
1. Make sure your computer is connected to the Internet. Two things to check for your computer’s Internet connection. One, we recommend that you turn off your local network’s firewall. Two, if your computer connects to the Internet via PPP (e.g. Dial UP, xDSL, or VPN), Internet Pass-through will only support TCP protocol.
2. Connect the phone to the computer using the provided USB cable.
3. On the Connect to PC screen, select Internet Pass-through, and then tap Done.
4. On the message window, tap OK.
Edit: also htc sync will have to be installed on the source computer for this to work
Thank you very much for this information. I appreciate your help!
You're welcome, i hope it works for you. I've never tried it, so good luck!
Related
Hi guys, I recently destroyed my XDA2 and got a 2s on the insurance
Bluetooth on WM2003 SE if fair poor, but I managed to upgrade the stack thinger to 3900..... so I'm not completely XDA illiterate.
However, the wifi baffles me! I have access to an unsecured wireless network with internet access, and my 2s will connect to it. When I go on the the internet on my XDA, even with wifi connected it still tries to connect GPRS to use the internet. If I keep clicking cancel, it will load the page (presumably through the wireless network's internet access).
It has become clear that I have no idea what I'm doing with regards to networking. Could someone post a quick guide as to how to set up the wifi (from scratch) so that when it finds an unsecured network it will automatically use it for the internet.
Sorry if there's already a thread on this but I really can't find it. Cheers guys
-Mike
just what i need as well, i have just bought a wifi router so i can use the internet on my xda2s.
using the wireless manger -> wireless LAN manager i get:
STATUS: connected to network
SSID: NETGEAR
TX RATE: AUTO
MODE:INFRASTRUCTURE
CHANNEL 11
BSSID: 00-09-5B-D7-DC-2A
MAC: 00-09-2D-0B-C0-A6
but even when i pull the Ethnet cable (forgot how its spelt) out of the back of the router it still stays connected. so im thinking its more my PC than the xda. the thing is the router came with no software so i have no idea if its connected properly. when i pull this Ethnet cable out of the wifi router o get network cable unplugged. The network card is Broadcom 440x 10/100 Integrated Controller. Which I have never used.
if anyone has a any ideas it would stop me pulling my hair out.
Sorry to hijack this thread
mike freegan said:
However, the wifi baffles me! I have access to an unsecured wireless network with internet access, and my 2s will connect to it. When I go on the the internet on my XDA, even with wifi connected it still tries to connect GPRS to use the internet. If I keep clicking cancel, it will load the page (presumably through the wireless network's internet access).
-Mike
Click to expand...
Click to collapse
Mike, I dont think the wifi first and GPRS next works. It doesnt work properly on mine either. If I try a internet access via gprs and a local wifi is readily available, the system does not automatically switch to local wifi.....I think this could be a microsoft issue than a xda issue.
robboy said:
but even when i pull the Ethnet cable (forgot how its spelt) out of the back of the router it still stays connected. so im thinking its more my PC than the xda. the thing is the router came with no software so i have no idea if its connected properly. when i pull this Ethnet cable out of the wifi router o get network cable unplugged. The network card is Broadcom 440x 10/100 Integrated Controller. Which I have never used.
Click to expand...
Click to collapse
when u pull out the ethernet cable from the back of the router, can you still surf the net from you xda or PC?? that seems odd. So either you are not connecting to "your" own router, or someone else has a same router with unsecured setup and you were locked onto their service....if you follow what I mean. what happens if you kill the power to your router? you should definitely notice that the wifi service disappear in your xda and PC.
Dont expect a router to disappear by simply unplugging the ethernet cable, if the router is powered up, it will show up on your xda and the PC although obviously there will be no internet access.....
sorry if i wasn't clear. i meant i was still receiving a signal from the wifi router. i could never use the internet on the pda
update:
i can browse my pc files wirelessly using resco explorer, using the standard file explorer i can view the pc files using \\network/c and i have finally been able to connect to activesync.
however i still can not connect to the internet.
Any ideas, from looking on this forum it seems lots of peeps are having problems with this but nobody seems to have the answer
XDA Wi-Fi Solution....It Works!!!!
Hi,
I'm new to the forum and new to XDA2i (presumably XDA2s is same!) ....
I too had many frustrations connecting the wi-fi...but now I've cracked it, here's how.......
On first very first use (or following a hard re-set) device users are prompted to choose “What do you want WLAN to connect to?” The option bullets are ‘Internet’ or ‘Work’….’Work’ should be selected, this will connect them to the nearest WLAN (if this network is WEP encrypted it should be switched to ‘Open’ rather than ‘shared’ as is often the case).
Next prompt asks for any WEP Encryption ‘Pass Key’ to be input, when doing so omit any ‘-‘ between character pairs. Normal start-up should then be completed. Once device is up and running…..
From ‘Start’ pull-down on the ‘Today Screen’ select…. ‘settings’>’connections tab’>’connections icon’>’advanced tab’>’Select Networks’> pull-down ‘My Work Network’ > ‘OK’ out of selections to save and exit.
Go to ‘Wireless Manager’ in programs, select WLAN icon from main screen (which should turn green to show active), then select mini ‘WLAN’ icon from lower toolbar to see the status of the connection, quality of signal etc.
That did it for me......
Cheers
windupmerchant
I have no problem to connect to the internet (to update weather, news etc) when I connect my P3300 to my desktop (which connect to the internet through a hardwire modem and a hardwire router). When I connect the P3300 to my laptop (the laptop is connect to internet through the WIFI rounter), I then cannot update those weather or news in my P3300. What setup do I need to change in the P3300 in order to be able to get to the internet through the laptop's WIFI connection? Thank you for any help.
Should happen automatically if you have a standing ActiveSync connection. No special settings needed. On the other hand - Check your firewall. Maybe some soft on the laptop is preventing your PDA from getting access to the internet!
Thanks Theonly1....one other thing though, I am using Vista ultimate x32....
not tried this yet but....just plug in and it will recognise the phone as a modem or GSM connection for internet surfing on the laptop?
Thanks again
Thanks for the feedback
Hi,
Thanks for the feedback. I have try to disable the firewall, but it still cannot connect to the internet. By the way, the laptop us window XT. If I enable the WIFI on the P3300, then it can connect to the internet by it's own WIFI. But if I disable it's own WIFI, then it did not connect to the internet throught the laptop's WIFI connection. I think there must be some setting in the network connection, so that it will be able to use the laptops WIFI and get information through it. But I do not know how. Any help is appreciated. Thanks again
Sorry, I really have searched everything I can think of. I have looked all over, I am just trying to find out what the regedit is to use the internet connection on my computer via usb on my t-mobile dash. I am running WM6.1 and have no signal over here for my phone. internet on the computer yes, but dash no. Does anyone know or know where I can look for it? I promise I have searched.
wm1 said:
Sorry, I really have searched everything I can think of. I have looked all over, I am just trying to find out what the regedit is to use the internet connection on my computer via usb on my t-mobile dash. I am running WM6.1 and have no signal over here for my phone. internet on the computer yes, but dash no. Does anyone know or know where I can look for it? I promise I have searched.
Click to expand...
Click to collapse
hook a wifi router up =)
other than that maybe put a bluetooth receiver on the pc and connect the phone to it?
I'm useing kavanas 6.1 rom i tweaked it a little but point being when i plug my dash into my comp and it syncs with active sync my phone accesses my computers internet connection which i think its designed to do. how do your internet and active sync settings look like?
under your USB to PC settings under connections do you have the Enable advanced network functionality checked?
Use ActiveSync to "pass through" this computer. That means the connected device can use the computer's network connection as if it were its own. You can use this feature to perform tasks such as downloading non-Outlook e-mail messages, to connect directly with Microsoft Exchange, or to browse the Internet.
Important Note For additional security, disable network bridging on the PC (specifically, bridging to a Remote NDIS adapter) before connecting to the PC to pass though to the Internet or a network. For more information on network bridging, see Windows Help on the PC.
Click Connection Settings.
Select Open ActiveSync when my device connects.
In the This computer is connected to list, select a connection to which this computer should connected when passing through ActiveSync.
thats from activesyncs help.
i guess i never realized it did that...yet i do it everyday...when its plugged in, edge doesnt even try to connect, it defaults to the pc
Thanks
Ok Gixxum,
You rock, I changed my deal to internet instead of automatic and it worked perfectly. I never thought to look there. Thanks. Now my roomate and I can surf the net at the same time.
wm1 said:
Ok Gixxum,
You rock, I changed my deal to internet instead of automatic and it worked perfectly. I never thought to look there. Thanks. Now my roomate and I can surf the net at the same time.
Click to expand...
Click to collapse
rock on brother
HI
I'm trying to share internet using the USB cable and activesync, I already configured my internet connection to share it with the new "local area connection" created when the HD is plugged in, but it doesn't work!
and by the way my computer has an IP:192.168.1.X, but the local area connection has an IP:192.168.2.X
really I even don't know if this is possible, but I did it with my old palm then I thought it can be possible.
thanks!
Using usb or bluetooth with activesync will share in automatic the PC internet connection without the need to set internet connection sharing on the pc
koji_nanami said:
Using usb or bluetooth with activesync will share in automatic the PC internet connection without the need to set internet connection sharing on the pc
Click to expand...
Click to collapse
Either with OR without my HD can't see the internet connection on PC with active sync over USB.
Huh
I just plug my HTC Touch HD into the usb port and select "Internet sharing" and it comes up straight away, even works from scratch on windows 7 cos i tested it!
Fellows.
I was digging into the search an could find nothing about it.
I had my excalibur working properly and after a hard reset, I was unable to reactivate this function.
I'm telling about use USB cable to share PC internet connection to HTC. I mean, navigate over the internet (with HTC) using USB cable conection instead of WIFI or GPRS alike.
When I sync my mobile, it automatically disables the WIFI connection, but I can't navigate just through USB connection.
Any thoughts?
thanks
joaonavarini said:
Fellows.
I was digging into the search an could find nothing about it.
I had my excalibur working properly and after a hard reset, I was unable to reactivate this function.
I'm telling about use USB cable to share PC internet connection to HTC. I mean, navigate over the internet (with HTC) using USB cable conection instead of WIFI or GPRS alike.
When I sync my mobile, it automatically disables the WIFI connection, but I can't navigate just through USB connection.
Any thoughts?
thanks
Click to expand...
Click to collapse
maybe this will help.http://forum.xda-developers.com/showpost.php?p=1057589&postcount=4
tried that.... no luck...