Related
OK...
The locks on my phone are very redundant to say the least.
In order to get to my home screen I have to do the following:
1. Press the button on top of the phone.
2. Slide the first lock down.
3. Draw in my security code to get past the lock out.
Step 3 can be shut on and off but I like this security so people can't mess with my phone. However considering I have to do step 1 before and step two also, it seems a tad over kill.
Can I disable step 2, the slide down lock screen?
Basically when I press the button on the top of the phone I want to be RIGHT at the screen where I draw in my lock pattern and or hit emergency call. I was unable to find anything in the settings. Did I miss it or is it really not there? If it's not there is there any other way to do it?
I'll fully rooted if that helps.
Try "No Lock" in the Market. It gets rid of the lock screen (and has a toggle widget). Not sure the effect on the security though.
No Lock gets rid of both the slide to unlock and the security passcode entry. Very handy if you don't care about security, but you get your mail from an Exchange server and they force you to have a security password.
Don't know how to just get rid of the slide to unlock.
i have a droid incredible with the same setup..sorta...i am running virtuous2.7
have u found a way to do this without No Lock?
You can do exactly what you're asking for with Switch Pro widget
nebenezer said:
You can do exactly what you're asking for with Switch Pro widget
Click to expand...
Click to collapse
To verify my understanding, the OP wants to, on his Evo, disable the Sense drag/slide-down screen lock, and only use the pattern lock.
The problem is that the Sense lock remains even when the pattern lock is enabled. (Unlike the Nexus 1, the AOSP screen lock is automatically disabled when pattern lock is enabled).
Are you indicating that Switch Pro Widget will DISABLE the Sense slide-down lock while maintaining the pattern lock?
snovvman said:
To verify my understanding, the OP wants to, on his Evo, disable the Sense drag/slide-down screen lock, and only use the pattern lock.
The problem is that the Sense lock remains even when the pattern lock is enabled. (Unlike the Nexus 1, the AOSP screen lock is automatically disabled when pattern lock is enabled).
Are you indicating that Switch Pro Widget will DISABLE the Sense slide-down lock while maintaining the pattern lock?
Click to expand...
Click to collapse
Would like to know, as my buddy was asking me about this.
Sent From My HTC Evo 4G Using Tapa Talk Pro!
If you use cyanogen rom, add power control widget and add the lockscreen option. Any time that widget is off when you hit the power button to unlock the phone you will go straight to pattern lock or home screen if you don't have one.
Sent from my PC36100 using XDA App
I would pay for an app/widget that handled this...
delete the sense lockscreen from the phone, it's just a file you can remove. Once you do that the system reverts to the standard aosp lock screen (or the pattern if you have security set).
deathsled said:
delete the sense lockscreen from the phone, it's just a file you can remove. Once you do that the system reverts to the standard aosp lock screen (or the pattern if you have security set).
Click to expand...
Click to collapse
I'm aware of this mod. People should be aware that you will need root access to delete the file. At the same time, I read that even with the AOSP/standard/vanilla lock screen, it (the standard lock screen) does NOT go away when the pattern lock is ENABLED.
For the Nexus 1, the standard lock DOES go away when pattern is ON, but it does not seem so with the Evo.
Can someone verify/dispute?
Thanks.
I can verify that after deleting the HTClockscreen.apk from my phone Vanilla lock appeared after a reboot. I then enabled a pattern lock only to find the Vanilla lock still necesary before getting to the pattern lock screen.
CzarMatt said:
I can verify that after deleting the HTClockscreen.apk from my phone Vanilla lock appeared after a reboot. I then enabled a pattern lock only to find the Vanilla lock still necesary before getting to the pattern lock screen.
Click to expand...
Click to collapse
Thanks. 1st post for CzarMat!!! Exactly my point--we need to find a way to make the Vanilla lock go away when pattern lock is enabled. But how??
This is all a bit redundant if the OP has Exchange security enabled on his device, which he has yet to clarify (unless I missed something).
I'd like an answer to this also...
Post 2.2, I was able to use No-Lock from the market to do exactly what the OP is asking. I have an Exchange account with a Security Policy (PIN) in place and have since upgraded to 2.2. It's a little redundant that I have to hit power, slide to unlock, then enter pin.
My workaround, for now, is setting the PIN lock screen to enable after 5 minutes, however I still have to slide regardless - UGHH, annoying.
I just want it to work the way I had it before with 2.1
is there any way to edit or app that enables a longer time period before the lock pattern screen comes up? LIke i think the max is like 15min
I want to be able to at least set the lock pattern screen to a 1hr interval, maybe 2hr
is this possible somehow?
Well, you can hit the "menu" capacitive button instead of sliding for a quicker unlock to the pattern security screen. That's what I normally do since it's a bit of finger acrobactics from the power button->aosp slide unlock->pattern screen.
jaypeezee said:
I'd like an answer to this also...
Post 2.2, I was able to use No-Lock from the market to do exactly what the OP is asking. I have an Exchange account with a Security Policy (PIN) in place and have since upgraded to 2.2. It's a little redundant that I have to hit power, slide to unlock, then enter pin.
My workaround, for now, is setting the PIN lock screen to enable after 5 minutes, however I still have to slide regardless - UGHH, annoying.
I just want it to work the way I had it before with 2.1
Click to expand...
Click to collapse
I agree. Apparently this is possible, I'm working on a solution right now. Perhaps an app I can release to the market. It will essentially unlock the phone for you - you may see a bit of the lock the second you unlock the phone, but if things go according to plan it will automatically bypass the slide lock for you.
[edit:] Sorry for the zombie thread revival - Still trying to find a solution for this problem.
CzarMatt said:
I agree. Apparently this is possible, I'm working on a solution right now. Perhaps an app I can release to the market. It will essentially unlock the phone for you - you may see a bit of the lock the second you unlock the phone, but if things go according to plan it will automatically bypass the slide lock for you.
[edit:] Sorry for the zombie thread revival - Still trying to find a solution for this problem.
Click to expand...
Click to collapse
Excellent news! Still looking for a solution. I think simulating a "menu" press will unlock the screen. Looking foward to it. Thanks!!
anyone come up with a solution for this?
Before installing the new Kit Kat upgrade, I had no password and was able to press the top power button to awaken or sleep the home screen without also having to swipe the little "lock" icon upward. With the new updated software, I now have to swipe the little lock every single time. So now I have two steps to complete before accessing my phone. Does anyone know how to remove it?
The first two options in the settings / security menu.
No Lock app
No Lock has been working for me: https://play.google.com/store/apps/details?id=org.jraf.android.nolock&hl=en
I'm rooted but running stock rom.
Blair
cmlusco said:
The first two options in the settings / security menu.
Click to expand...
Click to collapse
I have no screen lock at all on those settings and I still have to swipe to get to my home screen. This was removable in the previous update.
Huh? Set the first option to what kind of lockscreen you want pin pattern etc. Then put a check on the second option. This should bring up the security screen when the phone first wakes, then once you enter your pin pattern etc it should go straight to your home screen.
cmlusco said:
Huh? Set the first option to what kind of lockscreen you want pin pattern etc. Then put a check on the second option. This should bring up the security screen when the phone first wakes, then once you enter your pin pattern etc it should go straight to your home screen.
Click to expand...
Click to collapse
I do not want to have to swipe the "lock" icon. I never needed to before and now with KitKat I do. I'm wondering whether there is a way to remove that little feature.
These are my current settings.
I have no pin or lock, yet I still have to swipe the little lock up before accessing my home screen. Is there a way to go straight to my home screen without having to swipe the lock icon up?
That is very strange. I have the same settings for mine, screen lock none and the bypass lockscreen on wake box checked. When my phone is off and i hit the power button it goes straight to my home screen, no lock swipe involved.
Are you rooted?
cmlusco said:
That is very strange. I have the same settings for mine, screen lock none and the bypass lockscreen on wake box checked. When my phone is off and i hit the power button it goes straight to my home screen, no lock swipe involved.
Are you rooted?
Click to expand...
Click to collapse
Ditto. There must be something messed up with his rom or some app interfering with the settings.
There is also a setting for skipping the lock screen in the Sense 5 Toolbox so you could try that too if you're rooted and have Xposed.
No i think the reason it does this for me is because i have sense 5 toolbox and never realized it was an always on option. If your rooted, and dont want xposed or sense 5 toolbox, i made a flashable zip that will remove the lock screen.
http://forum.xda-developers.com/showthread.php?t=2642574
I'm not rooted.
Sent from my HTC6500LVW using xda app-developers app
Well then either root, or as stated in an earlier post try no lock from the market. Its free and does not require root.
I have my Screen lock set to "Swipe" (the default) but I feel it's too easy to unlock the phone. As well as swiping where it says "Swipe up or down to unlock", you can also pull down the notifications menu and then go into Settings and press the Back button (which unlocks the phone rather than going back to the lock screen, which is the behaviour I would expect and want). Also, if I swipe across to the camera and press the Back button, this also unlocks the phone (again, I expect it to go back to the lock screen).
However, if I change the Screen lock to Pattern or PIN, the lock screen actually functions as expected and I cannot pull down the notifications menu or leave the lock screen via the camera.
Is there any way of replicating this behaviour with the Screen lock set to "Swipe"? In other words, I want to swipe to unlock, but I don't want to be able to pull down the notifications menu or leave the lockscreen unless I have actually swiped to unlock.
Well I think this is the standard and right behavior for all phones. It was the case with the GS2 too. There's no point in disabling accessing the notifications menu when there aren't any locks. It's only makes sense when you lock your device with pattern or pin.
Unfortunately I don't know any apps or modification that can help.
Rototti said:
Well I think this is the standard and right behavior for all phones. It was the case with the GS2 too. There's no point in disabling accessing the notifications menu when there aren't any locks. It's only makes sense when you lock your device with pattern or pin.
Unfortunately I don't know any apps or modification that can help.
Click to expand...
Click to collapse
Hmm, OK - thanks for the information. The point is that it is too easy to accidentally unlock the phone - the lock screen should, well, lock the phone. I guess I could have a pattern or PIN unlock but it should be an option to have the same behaviour with swipe.
alex_hk90 said:
I have my Screen lock set to "Swipe" (the default) but I feel it's too easy to unlock the phone. As well as swiping where it says "Swipe up or down to unlock", you can also pull down the notifications menu and then go into Settings and press the Back button (which unlocks the phone rather than going back to the lock screen, which is the behaviour I would expect and want). Also, if I swipe across to the camera and press the Back button, this also unlocks the phone (again, I expect it to go back to the lock screen).
However, if I change the Screen lock to Pattern or PIN, the lock screen actually functions as expected and I cannot pull down the notifications menu or leave the lock screen via the camera.
Is there any way of replicating this behaviour with the Screen lock set to "Swipe"? In other words, I want to swipe to unlock, but I don't want to be able to pull down the notifications menu or leave the lockscreen unless I have actually swiped to unlock.
Click to expand...
Click to collapse
widget locker has pretty fine control over that sort of thing, including a disable notification bar toggle. i'm not sure if that actually works, though: i'm using delayed lock as well and that overrides some things.
Is there any way to disable the swipe to unlock on the G3 and just have it open to the phone when I tap the screen?
Let me explain... I followed the guide on here ( bliynd dot com *slash* archives *slash* 289) which allows you to use tasker and secure settings to write a profile that will disable your lock screen when you are on your home wifi (it is basically what the next version of android will have built in). I have a pin screen that welcomes you when you wake the phone whenever I am out but when I am on my home wifi it just shows the "Swipe in any direction to unlock" screen but I just want to be able to turn on the screen and have it just show my phone.
Is this possible?
demonjrules said:
Is there any way to disable the swipe to unlock on the G3 and just have it open to the phone when I tap the screen?
Let me explain... I followed the guide on here ( bliynd dot com *slash* archives *slash* 289) which allows you to use tasker and secure settings to write a profile that will disable your lock screen when you are on your home wifi (it is basically what the next version of android will have built in). I have a pin screen that welcomes you when you wake the phone whenever I am out but when I am on my home wifi it just shows the "Swipe in any direction to unlock" screen but I just want to be able to turn on the screen and have it just show my phone.
Is this possible?
Click to expand...
Click to collapse
just put it on none
jaythenut said:
just put it on none
Click to expand...
Click to collapse
I just noticed that tasker was not running. Enabled tasker and it worked.
I'm used to switch off the phone tap (or swipe) of the screen, without using the power button. But this method for HTC 10 is not working.. I tried to put different applications (for example Screen off and lock), but they are in conflict with the scanner - scanner is not working . Does anyone have any ideas?
Custm rom will give you this feature but you'll have to unlock your BL
The only app that can do this is screen lock pro by Prahallad, but it's a paid app.
It's achieves this via a workaround, which has a side effect that the screen is not actually locked until about 10 seconds after u initiate the lock.
Gestures in Nova Launcher can do this. I have it set to lock when I swipe down on the homescreen. The one catch to this (or any other third party solution) is that fingerprint unlock will be disabled until the device is locked with the power button.
chong81 said:
The only app that can do this is screen lock pro by Prahallad, but it's a paid app.
It's achieves this via a workaround, which has a side effect that the screen is not actually locked until about 10 seconds after u initiate the lock.
Click to expand...
Click to collapse
Thanx, u method is working...:good: ( Screen lock pro by Prahallad)
I discovered this behavior with the A9 and 6.0.1. What happens with a lock screen app, most will actually lock the phone, then when you try to use something like a double tap to wake, the phone acts as if it did a reboot, and requires a PIN to unlock. You can't use a fingerprint/face etc..upon a reboot...a PIN is always required. All the apps did this I tried.
The way I use a lock screen/wake is to 1) Root the phone, 2) Install Xposed, 3) install Gravity Box for MM, 4) Navigation buttons, 5) then use the Home button and set the double tap to Sleep.
Have to reboot after activating Gravity etc. You need to be familiar with Xposed and the modules/activating them.
Then if you double tap home to slepp. Then, also put your finger on the Fingerprint for example, and it unlocks and goes right to the screen. You can use the PIN/Face etc as well...but the lock programs always fooled the phone into thinking it rebooted, and only a PIN would unlock it..annoying. This method stops that, so you can still have security, and simply double tap to lock the screen, and easily wake the phone/unlock it with a variety of options.
Not sure if this is how you are using it, but none of the Lock screen apps will work. I've tried them all on the A9 6.0.1 MM. Only Rooting and Gravity Box will give you an ability to do something like a double-tap to sleep, without the reboot PIN always prompting you when you do unlock the phone.
wake On gesture
Miha2e said:
I'm used to switch off the phone tap (or swipe) of the screen, without using the power button. But this method for HTC 10 is not working.. I tried to put different applications (for example Screen off and lock), but they are in conflict with the scanner - scanner is not working . Does anyone have any ideas?
Click to expand...
Click to collapse
You can fine in app store
Tks giovanni
Is possible to lock the screen with power bottom, and one screen time out how to lock. nougat ,how, Tks giovanni.
Newby on HTC...Stock.
Miha2e said:
I'm used to switch off the phone tap (or swipe) of the screen, without using the power button. But this method for HTC 10 is not working.. I tried to put different applications (for example Screen off and lock), but they are in conflict with the scanner - scanner is not working . Does anyone have any ideas?
Click to expand...
Click to collapse
I personally use the double tap home on venom rom.. Works well.
Double tap screen will be kernel based, not sure how efficient it'll be on battery so I'd avoid it and use the double tap home key, not a massive difference.