[Q] Bootloop with TWRP but not with Philz ?? - Galaxy Note II Q&A, Help & Troubleshooting

Hello all,
I found a workaround to my issue but cannot get any explanations so i ask
Each time i install TWRP recovery, my phone is stuck in a bootloop : Note 2 logo, Teamwin logo and note 2 logo, etc etc...
To get my phone boots i need to flash Philz recovery via Odin and that's all...
little issue is that i prefer twrp recovery (for some options missing in philz) and planned to test DN3 rom and according to the FAQ, install via philz needs to format ext SD and i do not want to do this
i am under XXDMG1 Bootloader and this rom http://forum.xda-developers.com/showthread.php?t=2531989, yes it is a non wipe odex rom and yes i was to lazy to do a proper install so this one was good to test first leaks of 4.3 so yes i sometime experience some random reboots (that's why i wanted to test another rom) !
if i rememer well, issue with bootloop whan using twrp happened the first time i tested it when i attempted to root my phone with stock rom...
thank you in advance for answers or suggestions

tarassor said:
Hello all,
I found a workaround to my issue but cannot get any explanations so i ask
Each time i install TWRP recovery, my phone is stuck in a bootloop : Note 2 logo, Teamwin logo and note 2 logo, etc etc...
To get my phone boots i need to flash Philz recovery via Odin and that's all...
little issue is that i prefer twrp recovery (for some options missing in philz) and planned to test DN3 rom and according to the FAQ, install via philz needs to format ext SD and i do not want to do this
i am under XXDMG1 Bootloader and this rom http://forum.xda-developers.com/showthread.php?t=2531989, yes it is a non wipe odex rom and yes i was to lazy to do a proper install so this one was good to test first leaks of 4.3 so yes i sometime experience some random reboots (that's why i wanted to test another rom) !
if i rememer well, issue with bootloop whan using twrp happened the first time i tested it when i attempted to root my phone with stock rom...
thank you in advance for answers or suggestions
Click to expand...
Click to collapse
The FAQ never stated to wipe "ext SD card" ,it advised you wipe your internal/phone memory and what you can do is install the ROM via latest philz 6.25 or 6.26.0 let the ROM boot go through the set up screen and then you can switch recoveries to twrp ,and reboot.The phone shouldn't bootloop anymore

singhpratik87 said:
The FAQ never stated to wipe "ext SD card" ,it advised you wipe your internal/phone memory and what you can do is install the ROM via latest philz 6.25 or 6.26.0 let the ROM boot go through the set up screen and then you can switch recoveries to twrp ,and reboot.The phone shouldn't bootloop anymore
Click to expand...
Click to collapse
you are right, i did not read well, faq said :
5: Format Internal SDCard (in mounts and storage) and do Factory reset (I will install a new ROM option in PhilZ)
so i do not matter format internal sd caus i did a backup... i installed latest philz recovery, i may update boot loader XXDMG1 to MJ5 before flash DN3 ?

tarassor said:
you are right, i did not read well, faq said :
5: Format Internal SDCard (in mounts and storage) and do Factory reset (I will install a new ROM option in PhilZ)
so i do not matter format internal sd caus i did a backup... i installed latest philz recovery, i may update boot loader XXDMG1 to MJ5 before flash DN3 ?
Click to expand...
Click to collapse
Yes if you have any contents on your internal sd card make a back up and then wipe it clean using the options in philz, and after flashing your ROM upgrade to MJ5 bootloader for working wifi but let me tell you that none of the 4.3 Bootloaders would charge your phone when running 4.4.2 when turned off so if that's of importance to you ,you would want to upgrade to KitKat bootloader which is ND3 but it's knoxed meaning you cannot downgrade to 4.1.2 only 4.3 is possible plus warranty is void. I'll link you up with ND3 bootloader incase you decide to switch later but MJ5 is a must to have.
How to flash bootloader
MJ5 BL
ND3 BL

singhpratik87 said:
Yes if you have any contents on your internal sd card make a back up and then wipe it clean using the options in philz, and after flashing your ROM upgrade to MJ5 bootloader for working wifi but let me tell you that none of the 4.3 Bootloaders would charge your phone when running 4.4.2 when turned off so if that's of importance to you ,you would want to upgrade to KitKat bootloader which is ND3 but it's knoxed meaning you cannot downgrade to 4.1.2 only 4.3 is possible plus warranty is void. I'll link you up with ND3 bootloader incase you decide to switch later but MJ5 is a must to have.
How to flash bootloader
MJ5 BL
ND3 BL
Click to expand...
Click to collapse
Thank for helpfull advice, i just finish install rom and let the rom finish to boot i tried to connect to wifi and it connect without flash new bootloader.. maybbe it will go like previous rom, somtime switch wifi does not work and need to reboot, so let me go flash mj5 bootloader via Odin and restore some datas and apps
thank you again !

tarassor said:
Thank for helpfull advice, i just finish install rom and let the rom finish to boot i tried to connect to wifi and it connect without flash new bootloader.. maybbe it will go like previous rom, somtime switch wifi does not work and need to reboot, so let me go flash mj5 bootloader via Odin and restore some datas and apps
thank you again !
Click to expand...
Click to collapse
mj5 is a must for any ROM over 4.1.2 some people used the wifi patch from dr.ketan's thread but it seems the wifi patch is not enough when being on bootloader older than mj5 while running 4.4 ROM so mj5 is the minimum bootloader requirement to have properly working wifi connection and then upgrade to ND3 bootloader later if you feel the need.Enjoy the ROM

singhpratik87 said:
mj5 is a must for any ROM over 4.1.2 some people used the wifi patch from dr.ketan's thread but it seems the wifi patch is not enough when being on bootloader older than mj5 while running 4.4 ROM so mj5 is the minimum bootloader requirement to have properly working wifi connection and then upgrade to ND3 bootloader later if you feel the need.Enjoy the ROM
Click to expand...
Click to collapse
flashed mj5 but something went wrong, after flashing phone rebooted to recovery and after a reboot i got a message tells me that "firmware upgrade encountered an issue..." black screen with a phone and a screen and a yellow excllamation dot between
i installed this one :
BL_N7100XXUEMJ5_1903221_REV04_user_low_ship.tar
found in the trhead, i dl your link and give another try
edit : same thing after reflash the bootloader, i am trying to flash rom again now...
edit 2 : it seems to boot after re-flash of entire rom (without wipe again, it is the same rom)

tarassor said:
flashed mj5 but something went wrong, after flashing phone rebooted to recovery and after a reboot i got a message tells me that "firmware upgrade encountered an issue..." black screen with a phone and a screen and a yellow excllamation dot between
i installed this one :
BL_N7100XXUEMJ5_1903221_REV04_user_low_ship.tar
found in the trhead, i dl your link and give another try
edit : same thing after reflash the bootloader, i am trying to flash rom again now...
edit 2 : it seems to boot after re-flash of entire rom (without wipe again, it is the same rom)
Click to expand...
Click to collapse
I had that issue twice when i was flashing system fonts on my phone using philz recovery but luckily for me just pulling the battery out for sometime and restarting the font solved the issue. If you still get error try this Method if that fails then try this other Method One of them should help you out but let's pray reflashing the ROM again and properly flashing the BL again solves your issue.
---------- Post added at 08:59 PM ---------- Previous post was at 08:57 PM ----------
tarassor said:
flashed mj5 but something went wrong, after flashing phone rebooted to recovery and after a reboot i got a message tells me that "firmware upgrade encountered an issue..." black screen with a phone and a screen and a yellow excllamation dot between
i installed this one :
BL_N7100XXUEMJ5_1903221_REV04_user_low_ship.tar
found in the trhead, i dl your link and give another try
edit : same thing after reflash the bootloader, i am trying to flash rom again now...
edit 2 : it seems to boot after re-flash of entire rom (without wipe again, it is the same rom)
Click to expand...
Click to collapse
Okay download phone info app for samsung from playstore and see which bootloader version you got.Make sure your root access is not lost

singhpratik87 said:
Okay download phone info app for samsung from playstore and see which bootloader version you got.Make sure your root access is not lost
Click to expand...
Click to collapse
that's what i did and bootloader is mj5 as well !
i installed super SU and a root checker app and device is rooted, so let's titanium restore some apps :laugh:

tarassor said:
that's what i did and bootloader is mj5 as well !
i installed super SU and a root checker app and device is rooted, so let's titanium restore some apps :laugh:
Click to expand...
Click to collapse
Have fun

singhpratik87 said:
Have fun
Click to expand...
Click to collapse
Thank you again for helping me

Related

Flashing problem

Hey guys!
My Xperia Arc S is kinda new - 1 month old.
I was on Xperia Ultimade HD Rom for a while and wanted to install another rom, so i did via CWM Recovery.
All fine.
I wanted to restart my phone but it got stock in Sony Logo.
Because my bootloader cant be unlocked i rooted with kernel downgrade and CWM is not there after flashing due to the wipe.
So i flashed stock .tft with Flashtool and phone booted again.
Now when I'm trying to flash anything my phone gets always stuck in Sony Logo (even when i try Eagleboy's mode without wiping!).
Anyway: I'd like to install a custom rom.
Does anyone how to fix this?
Bootloader: Locked
Phone: LT18i
Rooted: yes
... and I have the 4.0.1.B.0.587 firmware installed right now.
Thanks in advance!
Phone Flashing problem
That's the only problem with locked bootloader's:crying:When you install some stock custom roms you have to wipe system to do a clean install which by default wipes cwm because it is installed in system for locked bootloader's.So if you have a problem with a install you have to flash another .ftf because you wiped cwm recovery.
When I first had arc I had a locked bootloader and it was a pain if something went wrong while flashinghaving to flash again etc! etc! It just got to stage where I had enough and took the plunge and unlocked the bootloader.:good:
I'm afraid it's one of those things you have to live with unless you unlock your bootloader:crying: ( I know you said you can't )there are quite a few stock roms that work but like I said if anything goes wrong you have to flash .ftf again.Probably a case of just trying each one Jader's rom alway's seemed to boot nice:good:
tallman43 said:
That's the only problem with locked bootloader's:crying:When you install some stock custom roms you have to wipe system to do a clean install which by default wipes cwm because it is installed in system for locked bootloader's.So if you have a problem with a install you have to flash another .ftf because you wiped cwm recovery.
When I first had arc I had a locked bootloader and it was a pain if something went wrong while flashinghaving to flash again etc! etc! It just got to stage where I had enough and took the plunge and unlocked the bootloader.:good:
I'm afraid it's one of those things you have to live with unless you unlock your bootloader:crying: ( I know you said you can't )there are quite a few stock roms that work but like I said if anything goes wrong you have to flash .ftf again.Probably a case of just trying each one Jader's rom alway's seemed to boot nice:good:
Click to expand...
Click to collapse
Hi, thanks for your answer
I tried to install 3 different roms till now - i wiped everything.
Then: Boot till sony-logo - I have to flash another tft with flashtool, Root again, and this takes time and is quite annoying.
I came from Samsung Galaxy S there wasn't the problem with the "bootloader" which is really annoying.
So: What should i do now?
I mean my CWM is not persistent and till now no rom worked.
Galaxy3User said:
Hi, thanks for your answer
I tried to install 3 different roms till now - i wiped everything.
Then: Boot till sony-logo - I have to flash another tft with flashtool, Root again, and this takes time and is quite annoying.
I came from Samsung Galaxy S there wasn't the problem with the "bootloader" which is really annoying.
So: What should i do now?
I mean my CWM is not persistent and till now no rom worked.
Click to expand...
Click to collapse
Hi totally agree it is frustrating!:crying: When you install some of these custom rom's they use Aroma installer are you unticking the reboot option in aroma installer and rebooting from cwm?Because you need to reboot that way (you seem to be doing everything right )
(1) Boot to cwm
(2) Wipe cache/Data/Advanced Dalvik cache
(3) Mounts & Storage format data/cache/system (NOTHING ELSE!)
(4) Install .zip on Sd card
(5) Choose options Aroma Installer
(6) Untick reboot option
(7) Reboot from cwm
tallman43 said:
Hi totally agree it is frustrating!:crying: When you install some of these custom rom's they use Aroma installer are you unticking the reboot option in aroma installer and rebooting from cwm?Because you need to reboot that way (you seem to be doing everything right )
(1) Boot to cwm
(2) Wipe cache/Data/Advanced Dalvik cache
(3) Mounts & Storage format data/cache/system (NOTHING ELSE!)
(4) Install .zip on Sd card
(5) Choose options Aroma Installer
(6) Untick reboot option
(7) Reboot from cwm
Click to expand...
Click to collapse
Yes i know , but thats what i did !
Wiped & formatting these settings and unticking reboot in aroma.
But it still doesn't work
Galaxy3User said:
Yes i know , but thats what i did !
Wiped & formatting these settings and unticking reboot in aroma.
But it still doesn't work
Click to expand...
Click to collapse
:crying:Like I said you seem to be doing everything rightHave you tried this rom http://forum.xda-developers.com/showthread.php?t=1994135 it's a two part installation but if I remember right this one seemed to install ok:good:
tallman43 said:
:crying:Like I said you seem to be doing everything rightHave you tried this rom http://forum.xda-developers.com/showthread.php?t=1994135 it's a two part installation but if I remember right this one seemed to install ok:good:
Click to expand...
Click to collapse
Haha i know. Thats why it seems strange for me too. But i need a custom rom and normally i would need a different kernel too.
But thats not possible. Sadly.
So nobody knows what i could change?
Galaxy3User said:
Haha i know. Thats why it seems strange for me too. But i need a custom rom and normally i would need a different kernel too.
But thats not possible. Sadly.
So nobody knows what i could change?
Click to expand...
Click to collapse
Only other thing you could try is changing your base firmware/ftf I notice you are using .587 base ftf try changing to another one, although Some of the custom roms recommend that firmware
Maybe someone else as any ideas
Απ: Flashing problem
If you accidentally formatted system then you removed the cwm. Try flashing the official ftf, install x-parts and redo everything without wiping system partition.
The other choice is to unlock your bootloader and you'll never face this problem again. I voided my warranty less a month after taking my phone, I knew that any problem will come up I could fix it myself
Sent from my Xperia Arc
Retrosid said:
If you accidentally formatted system then you removed the cwm. Try flashing the official ftf, install x-parts and redo everything without wiping system partition.
The other choice is to unlock your bootloader and you'll never face this problem again. I voided my warranty less a month after taking my phone, I knew that any problem will come up I could fix it myself
Sent from my Xperia Arc
Click to expand...
Click to collapse
Yep sure - but my CWM is gone when i wipe data. And I tried this: I flashed stock .ftf and installed xparts, then flashed a ROM without wipe - but doesn't boot and I cant access CWM again :/
And as I said i can't unlock my bootloader.
.. But the strange thing is just:
I even get bootloop when I install EAGLEBOYYS MOD (!) without WIPING anything! (just the recommended for sure)
That should not happen.
Why can't you unlock bootloader? Doing that would solve most of the problems you are facing. You don't have to downgrade to re root. Flash the stock kernel, install a new recovery then try again.
Sent from my Xperia Arc S using xda premium
If I go in service menu it says: Bootloader Unlock Allowed: No !
If I flash stock .ftf root is gone (?) -- RootChecker says that root is gone too.
Galaxy3User said:
Yep sure - but my CWM is gone when i wipe data. And I tried this: I flashed stock .ftf and installed xparts, then flashed a ROM without wipe - but doesn't boot and I cant access CWM again :/
And as I said i can't unlock my bootloader.
Click to expand...
Click to collapse
Galaxy3User said:
If I go in service menu it says: Bootloader Unlock Allowed: No !
If I flash stock .ftf root is gone (?) -- RootChecker says that root is gone too.
Click to expand...
Click to collapse
First of all - this thread: http://forum.xda-developers.com/showthread.php?t=1683957
I advice you to take step by step STRICTLY.
Or you can try to root with the FlashTool but I'm not sure if it will work with locked BL.
After that: http://forum.xda-developers.com/showthread.php?t=1955248
And for additional info: http://forum.xda-developers.com/showthread.php?t=1955248
TopperBG said:
First of all - this thread: http://forum.xda-developers.com/showthread.php?t=1683957
I advice you to take step by step STRICTLY.
Or you can try to root with the FlashTool but I'm not sure if it will work with locked BL.
After that: http://forum.xda-developers.com/showthread.php?t=1955248
And for additional info: http://forum.xda-developers.com/showthread.php?t=1955248
Click to expand...
Click to collapse
Thats how i rooted my Arc S!
Thats the only method that is working with locked BL.
And well, i took all the steps mentioned in the second topic you posted..
If you can't get it to work (stuck on Sony logo), then flash this in flash tool and then root again and do it one more time.
It´s ICS and kernel for Arc S but works fine on regular Arc. I use it myself on my Arc.
http://www.mediafire.com/?r0anos8emtx4iiy password is MMAS (If asked for)
Good luck and have fun with your superfast Arc with Ultimate HD™ ROM 2.0.
Click to expand...
Click to collapse
And this download link doesnt work :/
Galaxy3User said:
Thats how i rooted my Arc S!
Thats the only method that is working with locked BL.
And well, i took all the steps mentioned in the second topic you posted..
And this download link doesnt work :/
Click to expand...
Click to collapse
Here it is:
https://www.box.com/s/yu3dbp760kkyw7osoo41
https://www.box.com/s/9prbhnvkmyrglyoyl20j
TopperBG said:
Here it is:
https://www.box.com/s/yu3dbp760kkyw7osoo41
https://www.box.com/s/9prbhnvkmyrglyoyl20j
Click to expand...
Click to collapse
I flashed these files already after i got stuck at SONY logo but doesnt help..
Galaxy3User said:
I flashed these files already after i got stuck at SONY logo but doesnt help..
Click to expand...
Click to collapse
What does mean "doesnt help" ?
What are you trying to do and dont work, what is messages, what happens, did you have newest version of FlashTool, did you have installed ADB drivers, what's the error ?
TopperBG said:
What does mean "doesnt help" ?
What are you trying to do and dont work, what is messages, what happens,
did you have newest version of FlashTool, did you have installed ADB drivers,
what's the error ?
Click to expand...
Click to collapse
I mean when i flash this .ftf and reroot and install CWM all works fine.
But when I try to flash any ROM and doing all wipes etc. correctly it still gets stuck at SONY logo!
I have newest version of flashtool and ADB drivers installed. In flashtool there is no error.
Galaxy3User said:
I mean when i flash this .ftf and reroot and install CWM all works fine.
But when I try to flash any ROM and doing all wipes etc. correctly it still gets stuck at SONY logo!
I have newest version of flashtool and ADB drivers installed. In flashtool there is no error.
Click to expand...
Click to collapse
Which ROM are you trying to flash?
Is that ROM for locked BL ?

[Q]How to install custom rom without softbrick

Hello members,i have a problem . I bought a samsung galaxy tab 3 7.0 wifi (SM-T210) last week and i have rooted it + installed cwm and after i flash anything(custom lock screen or custom rom) the tablet gets soft bricked and the rom dont boot anymore,it enters automaticaly in cwm. So how can i fix it?
d0vada said:
Hello members,i have a problem . I bought a samsung galaxy tab 3 7.0 wifi (SM-T210) last week and i have rooted it + installed cwm and after i flash anything(custom lock screen or custom rom) the tablet gets soft bricked and the rom dont boot anymore,it enters automaticaly in cwm. So how can i fix it?
Click to expand...
Click to collapse
Which recovery Version you are flashed on your tab?
And which root.zip you are used?
Flash Stockrom and try it again.
bierma32 said:
Which recovery Version you are flashed on your tab?
And which root.zip you are used?
Flash Stockrom and try it again.
Click to expand...
Click to collapse
Im using the latest TWRP recovery 2.7.0.0 and for root i use a zip called universal root armeabi *smth like that*
I allready flashed the stockrom 3 times and i got the same result. also im using the T210XXANC2 firmware.
In CWM, wipe data and factory reset. Then go to Download mode, use Odin and flash your stock rom. That should do it.
paranoidmarvin42 said:
In CWM, wipe data and factory reset. Then go to Download mode, use Odin and flash your stock rom. That should do it.
Click to expand...
Click to collapse
i have rooted stock rom running with latest twrp but if i flash a custom rom it wont boot anymore, it gets softbricked but i dont know why.
d0vada said:
i have rooted stock rom running with latest twrp but if i flash a custom rom it wont boot anymore, it gets softbricked but i dont know why.
Click to expand...
Click to collapse
What ROM are you trying to flash? You must have missed a step. Make sure you read the instructions carefully before doing anything and use a custom rom for your device. Try again. I'm also new to Android and has softbricked my tab a couple of times now.
Go back to stock. Let your device boot completely. Install recovery again. Reboot again.
To make it easier, how about watching a video so you can see how it's done properly? It helped me a lot. http://forum.xda-developers.com/showthread.php?t=2459817
Good luck.
paranoidmarvin42 said:
What ROM are you trying to flash? You must have missed a step. Make sure you read the instructions carefully before doing anything and use a custom rom for your device. Try again. I'm also new to Android and has softbricked my tab a couple of times now.
Go back to stock. Let your device boot completely. Install recovery again. Reboot again.
To make it easier, how about watching a video so you can see how it's done properly? It helped me a lot. http://forum.xda-developers.com/showthread.php?t=2459817
Good luck.
Click to expand...
Click to collapse
I want to flash seal rom. also, thanks for the links, i will check them later.
d0vada said:
I want to flash seal rom. also, thanks for the links, i will check them later.
Click to expand...
Click to collapse
Plesse,dont use TWRP , i prefere CWM or PhilzTouch,why : alot of user are have postet probs when they used TWRP.
Also i prefere after rooting The Blackhawk Kernel.
bierma32 said:
Plesse,dont use TWRP , i prefere CWM or PhilzTouch,why : alot of user are have postet probs when they used TWRP.
Also i prefere after rooting The Blackhawk Kernel.
Click to expand...
Click to collapse
So i have flashed (again) the stock firmware from sammobile,i rooted it,installed cwm 6.0.4.7 and then i flashed SEAL rom v4 and its not working. Its like something that doesnt let custom rom boot on my tab. Sad part is that i cant provide a logcat because the android wont boot.
EDIT: Do i have to unlock the bootloader?
d0vada said:
So i have flashed (again) the stock firmware from sammobile,i rooted it,installed cwm 6.0.4.7 and then i flashed SEAL rom v4 and its not working. Its like something that doesnt let custom rom boot on my tab. Sad part is that i cant provide a logcat because the android wont boot.
EDIT: Do i have to unlock the bootloader?
Click to expand...
Click to collapse
Last Try,
Have you flashed The Blackhawk Kernel?
If not , Boot Into recovery, make a full wipe, flash seal ,Blackhawk Kernel ,full wipe again and reboot.
If this all not help ,post your prob at The Rom Thread.
bierma32 said:
Last Try,
Have you flashed The Blackhawk Kernel?
If not , Boot Into recovery, make a full wipe, flash seal ,Blackhawk Kernel ,full wipe again and reboot.
If this all not help ,post your prob at The Rom Thread.
Click to expand...
Click to collapse
I allready tried 3 roms(seal, 4.2.2 beta 2 and inspire) and all goes to the same result. Also, after installing the cwm i flash first the blackhawk kernel and android boots normally (stock rom with custom kernel) but custom rom with or without custom kernel wont boot.
I had similar problem try flashing seal v3.

[Q] Root for SM-P605 kitkat

Hey
I been looking in the forums, but I havent be able to finde if there is a root for kitkat.
Do anyone know if that is one and if so, can you plz link to the thread
Thaning you in advance
Yes: http://autoroot.chainfire.eu
Although I have a p600 and his method worked fine for JB and KK.
Don't use the P6700/601 cf-autoroot on your P605. It will brick it...
The old cf-autoroot is for JB and doesn't work on KK...
Go to the Original developement thread and look at the TWRP 2.7.0.1 thread. It will supply answers and links...
ultramag69 said:
Don't use the P6700/601 cf-autoroot on your P605. It will brick it...
The old cf-autoroot is for JB and doesn't work on KK...
Go to the Original developement thread and look at the TWRP 2.7.0.1 thread. It will supply answers and links...
Click to expand...
Click to collapse
Hi,
TWRP 2.7.0.1 not work to P605XXUCNE2 !!!
What recovery works?
@+
Pyrana
Root p605kitkat 4.4.2
Hi All, hope I'm posting this is the right forum .Im quite a beginner in Android terms so please be patient with me ...
I have a Galaxy Note 10.1 2014 sm-p605 and use it while travelling , i dont have a computer with me most of the time so i rely on the tablet for most of what i do , yesterday i have updated to android 4.4.2 kitkat , whitout knowing i would loose full access to my 32 Gb SD card...well that made me quite furious as most people...so i decided try rooting it , after backing up all my files i used CF Auto Root ( CF-Auto-Root-lt03lte-lt03ltexx-smp605.zip , well that didnt quite work as i was getting
the boot loopwith the message RECOVERY IS NOT SEANDROID ENFORCING, after much reading i was able to recover the tablet to boot back , no rooting was done but im pretty sure i triggered knox and voided the warranty ....anyway i still want to try getting full access to my SD card, either by rooting it or any other way ,if there is a valid file explorer app without root i am keen to know, or if anyone can show me the way to root this device I will really appreciate.Device Details:
AP605ZSUCNE3
CP: P605ZSUCNE1
csc605OZSUCNE3
KitKat 4.4.2
With all do respect TWRP 2.7.0.1 does work on 4.4.2
I have it working myself.
Now To gain root on 4.4.2, install Autoroot - Chainfire for the SM P905
Then search the forums for a P605 recovery (Its somewhere here)
Youll get full root with original stock recovery. Then flash TWRP 2.7.0.1 and then youll be fine.
Remember the current TWRP version on the main post isnt the correct version...Further into the thread there is the correct version.
Need any help. as per always im on Facebook and Am happy to teamviewer in
fkofilee said:
With all do respect TWRP 2.7.0.1 does work on 4.4.2
I have it working myself.
Now To gain root on 4.4.2, install Autoroot - Chainfire for the SM P905
Then search the forums for a P605 recovery (Its somewhere here)
Youll get full root with original stock recovery. Then flash TWRP 2.7.0.1 and then youll be fine.
Remember the current TWRP version on the main post isnt the correct version...Further into the thread there is the correct version.
Need any help. as per always im on Facebook and Am happy to teamviewer in
Click to expand...
Click to collapse
No need to flash auto root for P905 just flash supersu from recovery TWRP 2.7.0.1 WORKS on 4.4.2!!!!
alex_72gr said:
No need to flash auto root for P905 just flash supersu from recovery TWRP 2.7.0.1 WORKS on 4.4.2!!!!
Click to expand...
Click to collapse
Hi,
Test TWRP 2.7.0.1 and no found !! to Kitkat
Big problem screen fully striped and very difficult to restore! And autoroot is a disaster!
Alan-B said:
Hi,
Test TWRP 2.7.0.1 and no found !! to Kitkat
Big problem screen fully striped and very difficult to restore! And autoroot is a disaster!
Click to expand...
Click to collapse
Mate, you were told cf-autoroot DOESN'T work and will screw things up... Why did you flash over something not working right?
You needed to find the stock recovery first, then flash 2.7.0.1 (not 2.7.0.0) to get TWRP installed. You then flash latest supersu using TWRP. This will root your device and give you a custom recovery..
The only thing is TWRP can't make a backup to the External sd card if you have it formatted exFAT...
Best advice, flash stock rom (kitkat only) again using PC ODIN, try again...
ultramag69 said:
Mate, you were told cf-autoroot DOESN'T work and will screw things up... Why did you flash over something not working right?
You needed to find the stock recovery first, then flash 2.7.0.1 (not 2.7.0.0) to get TWRP installed. You then flash latest supersu using TWRP. This will root your device and give you a custom recovery..
The only thing is TWRP can't make a backup to the External sd card if you have it formatted exFAT...
Click to expand...
Click to collapse
Yep, autoroot for P605 hasnt been updated yet to 4.4.2
Yes you can flash twrp and then SU , I came from the full firmware reflash... I t was the only way to put root on at the time.
Alan-B said:
Hi,
Test TWRP 2.7.0.1 and no found !! to Kitkat
Big problem screen fully striped and very difficult to restore! And autoroot is a disaster!
Click to expand...
Click to collapse
You can follow those links to get what you need.
http://forum.xda-developers.com/showpost.php?p=53236030&postcount=19
alex_72gr said:
You can follow those links to get what you need.
http://forum.xda-developers.com/showpost.php?p=53236030&postcount=19
Click to expand...
Click to collapse
Hi,
Having installed TWRP 2.7.0.1 on P605XXUCNE2 everything planted me! over the boot rom recovery mode and more !!!!
I spent two hours to get to switch back download.J 'thought my Note2 LTE 2014 was dead!
Sorry for the translation, I'm French
Alan-B said:
Hi,
Test TWRP 2.7.0.1 and no found !! to Kitkat
Big problem screen fully striped and very difficult to restore! And autoroot is a disaster!
Click to expand...
Click to collapse
0. If you screwed something up, flashed a wrong recovery, flash the stock rom again. If you are stuck in a boot loop, there is plenty of thread about how to boot into odin mode from there.
1. Download attached TWRP 2.7.0.1, it works with P605. I have it myself.
2. Start the tablet, download SuperSU-v1.99r4.zip, place on SD Card.
3. Reboot into Odin mode, (VolDown+Home), flash TWRP. If your recovery is being restored, don't tick Auto Reboot in Odin and turn off manually after flashing, then boot into TWRP.
4. Boot into TWRP, reset to factory settings. You will be asked if you want Root at some point. I think it's when you reboot, I don't remember.
5. When booted into Android, see if SuperSU downloader app is there. If no - boot TWRP and look around, because you missed something.
If yes, reboot into TWRP again and flash UPDATE-SuperSU-v1.99r4.zip.
Congrats, you are now rooted.
xda_user_p600 said:
0. If you screwed something up, flashed a wrong recovery, flash the stock rom again. If you are stuck in a boot loop, there is plenty of thread about how to boot into odin mode from there.
1. Download attached TWRP 2.7.0.1, it works with P605. I have it myself.
2. Start the tablet, download SuperSU-v1.99r4.zip, place on SD Card.
3. Reboot into Odin mode, (VolDown+Home), flash TWRP. If your recovery is being restored, don't tick Auto Reboot in Odin and turn off manually after flashing, then boot into TWRP.
4. Boot into TWRP, reset to factory settings. You will be asked if you want Root at some point. I think it's when you reboot, I don't remember.
5. When booted into Android, see if SuperSU downloader app is there. If no - boot TWRP and look around, because you missed something.
If yes, reboot into TWRP again and flash UPDATE-SuperSU-v1.99r4.zip.
Congrats, you are now rooted.
Click to expand...
Click to collapse
Re hello,
he problem is that just after the flash TWRP nothing boot! or recovery (zebra screen) and reboot loop and very difficult to switch back to download due to the reboot loop!
Just TWRP 2.7.0.0 works with Version 4.3 Note: The 2.7.0.1 works with 4.3 rom or not ? just to test !
Thank you for the helps
Alan-B said:
Re hello,
he problem is that just after the flash TWRP nothing boot! or recovery (zebra screen) and reboot loop and very difficult to switch back to download due to the reboot loop!
Just TWRP 2.7.0.0 works with Version 4.3 Note: The 2.7.0.1 works with 4.3 rom or not ? just to test !
Thank you for the helps
Click to expand...
Click to collapse
Attached version works with 4.4.2 Nordic.
After you flashed wrong recovery and have "zebra screen", Make sure you flashed stock firmware after that. Don't try flashing anything else before you flash stock.
xda_user_p600 said:
Attached version works with 4.4.2 Nordic.
After you flashed wrong recovery and have "zebra screen", Make sure you flashed stock firmware after that. Don't try flashing anything else before you flash stock.
Click to expand...
Click to collapse
re...
I just tested a flash TWRP from your link, but it boot and stuck on the TAB 10.1 lte logo
Mate, flash Kitkat rom 1st then flash TWRP... Doing anything else is gonna get you in trouble...
2.7.0.1 TWRP has Kitkat recovery, not Jellybean so you will have issues if you flash on a Jellybean rom...
ultramag69 said:
Mate, flash Kitkat rom 1st then flash TWRP... Doing anything else is gonna get you in trouble...
2.7.0.1 TWRP has Kitkat recovery, not Jellybean so you will have issues if you flash on a Jellybean rom...
Click to expand...
Click to collapse
Re hello, and always attempts to boot and TWRP stuck on 10.1 NOTE and the red and blue lines jaune.testé logo with flash P605XXUCNE2_P605OXACNE2_P605XXUCNE2_HOME.tarre, boot in download mod and flash TWRP without reboot, then reboot manual recovery (stuck) Same with auto reboot and there is nothing not to have the display of recovery!
I understand you. Are you sure you're not missing anything? It might help to flash stock NEE again. In my case I ticked "Update boot loader", do you mind trying that?
Remember, TWRP is VolUp+Home. It should display colored text in the right upper corner on 2014 logo when booting, if it's entering recovery mode.
Hi,
Solved it is Ok....
Thanks

[ROM] MOAR MM Rom v4.1 - Toasted Edition - 07/22/2016

Not my work but it works now.
How to
Reboot in recovery
Wipe device
Flash Rom and kernel:
Download for rom:
Flash this after:
Reboot
Recommend using twrp 3.0.0.1
what about the hardware keys? do they work with moar rom and this kernel or do we need virtual hardware keys?
FingerBlastJ said:
what about the hardware keys? do they work with moar rom and this kernel or do we need virtual hardware keys?
Click to expand...
Click to collapse
Kernel fixes hardware issues
and if I'm on note 5 moar rom with patch.... no issue flashing right?
Sky-high made us a kernel? Sweet sadistic smiles, success! So happy. Anyone know if it'll work like the LP patch did for note roms, or does more need to happen first? Or do people just need to start trying and report back?
-edit-
Clicked the link and saw it was a note 5 Rom. What can I say, I was excited!
Blzfrost said:
Sky-high made us a kernel? Sweet sadistic smiles, success! So happy. Anyone know if it'll work like the LP patch did for note roms, or does more need to happen first? Or do people just need to start trying and report back?
-edit-
Clicked the link and saw it was a note 5 Rom. What can I say, I was excited!
Click to expand...
Click to collapse
Just flash Rom and kernel everything will work.
MonkeyAround said:
Just flash Rom and kernel everything will work.
Click to expand...
Click to collapse
Oh I'm setting everything up right now for the flash! I'm so excited. Once I realized you linked to a note 5 Rom most of my questions got answered. My favorite part, the kernel was posted on my bday.
i tried wiping and clearing cache then flashing the rom and the kernel. nothing actually happens to my phone. i end up on the same home screen and apps i had installed on moar 5.1.1 with note 5 patch.
any ideas why wiping my phone doesnt work on twrp 3.0.0.0?
FingerBlastJ said:
i tried wiping and clearing cache then flashing the rom and the kernel. nothing actually happens to my phone. i end up on the same home screen and apps i had installed on moar 5.1.1 with note 5 patch.
any ideas why wiping my phone doesnt work on twrp 3.0.0.0?
Click to expand...
Click to collapse
Update your TWRP.
https://dl.twrp.me/zenltespr/
yea I tried doing that with Odin and it would freeze mid way. I also tried flashing a twrp update zip file on twrp and that didn't work either.
you think I should flash with flash fire?
bricked my phone by trying to flash newer version of twrp with twrp manager
been trying to flash unbrick tar and pit file to get back up and running but its not working.
any help is much appreciated
fixed the brick by flashing new recovery in Odin, now on 3.0.2. still can't get the phone to wipe out install new rom and kernel
FingerBlastJ said:
fixed the brick by flashing new recovery in Odin, now on 3.0.2. still can't get the phone to wipe out install new rom and kernel
Click to expand...
Click to collapse
Have you checked for root with root checker? I have lost root access a few times in the past?
yea I just checked with root checker and I have root access.
I've never had this happen to me... weird
anything else you can think of?
FingerBlastJ said:
yea I just checked with root checker and I have root access.
I've never had this happen to me... weird
anything else you can think of?
Click to expand...
Click to collapse
Last thing I can think of is when opening TWRP the first time. It asks if you want to make the system 'read only'. Did you select No?
I never got that message when I flashed twrp 3.0.2 to unblock... how do I make it show up?
FingerBlastJ said:
I never got that message when I flashed twrp 3.0.2 to unblock... how do I make it show up?
Click to expand...
Click to collapse
Not sure. You can click mount and see what is mounted. I am not sure that will work. I am not sure exactly what you are trying to wipe, but mount the items you are attempting to wipe and make sure the read-only is unchecked.
Try this:
Check to see if oem is checked
Re-root via root tar/odin
twrp 3.0.0.1 from edge files post in general
Backup stock
Wipe
Flash Moar
Don't reboot
Flash skyhigh kernel
Flash xposed(don't have to)
Reboot
Allow it to boot loop a couple time (from sky kernel)
Give 5-10 minutes to boot
I just did it with no issues and I've personally had more luck with 3.0.0.1 than any of the others.
heres my issue...twrp doesnt do anything for me (all versions) whether i wipe or install
so i used flashfire to flash the rom and the kernel at once and it finally displayed aroma installer (wouldnt get that in twrp)
however, after it in stalled i got stuck on boot screen
the only fix for this was flashing unbrick aok3 tar file which brought me to stock
i put on twrp as a recovery again starting fresh unrooted and it still doesnt respond to any of my commands
i think i will try flash fire on stock one more time and see what happens since its the only thing that is responding
FingerBlastJ said:
heres my issue...twrp doesnt do anything for me (all versions) whether i wipe or install
so i used flashfire to flash the rom and the kernel at once and it finally displayed aroma installer (wouldnt get that in twrp)
however, after it in stalled i got stuck on boot screen
the only fix for this was flashing unbrick aok3 tar file which brought me to stock
i put on twrp as a recovery again starting fresh unrooted and it still doesnt respond to any of my commands
i think i will try flash fire on stock one more time and see what happens since its the only thing that is responding
Click to expand...
Click to collapse
Your on Lp bootloader that's your issue.
Download Marshmallow tar from the general post I made for rooting Bpg1.
Flash tar and follow post.
twrp. 3.0.x.x is more for marshmallow. You need to be on 6.0.1 not 5.1.1.
Don't use fireflash on this device.
Fireflash is more for phones with locked bootloaders like Verizon s4 on the of1 update.
Fireflash isn't really up to date with our phone and could easily brick your device.

Can not flash new roms, it stucks on boot screen

Hello dear friends,
I had been using some custom roms for a while like lineage os, cm, resurrection etc.Then i wanted to change it to a 4.4 rom.Once i flashed a stock rom by odin.Then i tired to use Eclipse.I have been using it without a problem.But now i want to upgrade the phone again.
-And i tried to flash different roms but i have the same problem.It passes SAMSUNG screen and shows ROM's flash.But it stucks in there.It keeps moving but nothing more.The rom doesn't start the homescreen.I tried to factory reset, wipe cache and dalvik cache.But they also doesn't work at all.I wait about half and hour or 1 hour, Once i tried to let it work overnight even.But doesn't work.Now i try to flash Cosmic OS but the problem still exists.I have a Eclipse rom backup and i restore it and it works.I use TWRP recovery on the phone.
-So what the problem might be?How can i fix it?
I recommend flashing back to the latest stock ROM, factory reset, and start over with TWRP.
audit13 said:
I recommend flashing back to the latest stock ROM, factory reset, and start over with TWRP.
Click to expand...
Click to collapse
Thank you it worked.I just want to explain the steps to give some information for the others who got the same problem.
-Connect the phone to the pc and flash a stock rom by odin or heimdall in linux
-Then wait for the rom to start.
-Open stock recovery mod (not TWRP or CWM Recovery)
-Format all data
-Flash a custom recovery (I use TWRP)
-And flash the custom rom as instructions.
And it works for me.Thank you again.
stranger_88 said:
Thank you it worked.I just want to explain the steps to give some information for the others who got the same problem.
-Connect the phone to the pc and flash a stock rom by odin or heimdall in linux
-Then wait for the rom to start.
-Open stock recovery mod (not TWRP or CWM Recovery)
-Format all data
-Flash a custom recovery (I use TWRP)
-And flash the custom rom as instructions.
And it works for me.Thank you again.
Click to expand...
Click to collapse
Glad you got it working.
Thanks for posting your method.
same problem
i'm gettin the same problem...
in download mode there are few lines as follows:
odin mode
prduct name:gt-n7100
current binary:Custom
System Status:Custom
knox warranty void: 1
AP SWREV: A2
PLSSS HELP
ShubhamS156 said:
i'm gettin the same problem...
in download mode there are few lines as follows:
odin mode
prduct name:gt-n7100
current binary:Custom
System Status:Custom
knox warranty void: 1
AP SWREV: A2
PLSSS HELP
Click to expand...
Click to collapse
Which rom you are using to flash?
Is the rom exactly for your phone model? (For eg, N7100 rom cannot be used for N7105)
thomas140 said:
Which rom you are using to flash?
Is the rom exactly for your phone model? (For eg, N7100 rom cannot be used for N7105)
Click to expand...
Click to collapse
Yep ...it's for N7100 only.... DotOs 7.1.2 by Santosh
---------- Post added at 08:20 AM ---------- Previous post was at 08:16 AM ----------
stranger_88 said:
Hello dear friends,
I had been using some custom roms for a while like lineage os, cm, resurrection etc.Then i wanted to change it to a 4.4 rom.Once i flashed a stock rom by odin.Then i tired to use Eclipse.I have been using it without a problem.But now i want to upgrade the phone again.
-And i tried to flash different roms but i have the same problem.It passes SAMSUNG screen and shows ROM's flash.But it stucks in there.It keeps moving but nothing more.The rom doesn't start the homescreen.I tried to factory reset, wipe cache and dalvik cache.But they also doesn't work at all.I wait about half and hour or 1 hour, Once i tried to let it work overnight even.But doesn't work.Now i try to flash Cosmic OS but the problem still exists.I have a Eclipse rom backup and i restore it and it works.I use TWRP recovery on the phone.
-So what the problem might be?How can i fix it?
Click to expand...
Click to collapse
Stranger_88....try doing a complete advanced wipe using Twrp..and then install a rom
You said DotOS 7.1.2, it is custom rom and I think it needs to be install using TWRP. And also, need to perform wipe in TWRP before reboot. Otherwise, it will stuck at Samsung logo boot loop.
Solved
thomas140 said:
Which rom you are using to flash?
Is the rom exactly for your phone model? (For eg, N7100 rom cannot be used for N7105)
Click to expand...
Click to collapse
Dude I got it working. Use Heimdall in Linux , my phone was detected in Heimdall and I followed the simple instructions there and flashed a new rom.

Categories

Resources