Develop Bugs

Noob here

Hey all sry if my question has been asked and answered b4 but I just flashed my gs2 to the fk23 jb leak and was wondering if I can flash it back to ics just as easy asit was to flash it to jb (un rooted). Im having issues with the flash on my phone n want to return it to sprint and I don't want them giving me crap about flashing the phone pls help a noob out...
Sent from my SPH-D710 using xda app-developers app

Download the Full one-click and extract the file. Put your phone into download mode and connect it to the pc and run.
Here's the link to the file
http://forum.xda-developers.com/wiki/Samsung_Epic_4G_Touch/ROMs/S:D710.0.5S.FF18
Here is some instructions:
http://rwilco12.androidfilehost.com/HowToOneClick.html

koma77 said:
Hey all sry if my question has been asked and answered b4 but I just flashed my gs2 to the fk23 jb leak and was wondering if I can flash it back to ics just as easy asit was to flash it to jb (un rooted). Im having issues with the flash on my phone n want to return it to sprint and I don't want them giving me crap about flashing the phone pls help a noob out...
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
There are several ways to accomplish this..
Do you have any experience using Odin? You can flash the original Fi27 tar which would take you back stock unrooted. You can locate that in the Stock ROM Repository by RWilco.
You could flash the rooted one click (you'll need to do the restore, not the no data) then you'd have to remove root.
Or you could flash an old GB build and then update the really long way and be pure stock.

Yes you can flash back to ics the same way to did to fk23. Go to dev section and download odin 1 click restore fi27. It will fully wipe and will put phone to brand new state.
Sent from my SPH-D710 using Tapatalk 2

Moved to Q and A

Thank u everyone
Sent from my SPH-D710 using xda app-developers app

miketucky350 said:
Yes you can flash back to ics the same way to did to fk23. Go to dev section and download odin 1 click restore fi27. It will fully wipe and will put phone to brand new state.
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
i was looking for it n found it but i also see [OC] FI27 Full Stock ROM One-Click.exe does it matter if it sez oc or odin???

OC means one click and they are odin based. Easiest way to get back to stock or stock rooted.

never mind i got it thanks again guys

I am a newbie as well, trying to get my post count to be able to post in development section.

tomtom1265 said:
I am a newbie as well, trying to get my post count to be able to post in development section.
Click to expand...
Click to collapse
Please don't spam reply to boost post counts. At least you were honest about it...
Sent from my SPH-L900 using Tapatalk 2

[Q] Unrooted before Triangle away -___-

Hey guys/ gals,
Im new at posting here but not new at lurking around on the forums...
anyways like the title says, i unrooted with SuperSU before i used triangle away. so now i cannot flash the stock rom.
i am following "Towle's" guide on ((How-To Completely Unroot Your Galaxy SIII |Zero Flash Counter|"Normal" Status)) now. but before that i got carried away.
my question is how can i re-root or take away the triangle in order to go back to stock?
Thanks in advance

Odin to the latest firmware, which you can find in this forum or at sammobile. Then root your phone like you did b4. By this time you can use triangle away and odin back to the latest firmware without triggering any flash counter.
Sent from my SGH-T959V using xda premium

dukeoflove said:
Dont unroot, just simply use triangle away then odin with the lastest firmware if you wanna return to stock without any flash counter.
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
i already unrooted (is my problem) so what to do now?

omar4578 said:
i already unrooted (is my problem) so what to do now?
Click to expand...
Click to collapse
See my revised post above
Sent from my SGH-T959V using xda premium

dukeoflove said:
See my revised post above
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
i thought i read somewhere that you cannot use odin when you have a triangle?
EDIT: thanks for your quick replies!

No. You can use odin.
I'd suggest Odin flash the root66 firmware, then use triangle away, then odin the stock firmware. Thats it!
Everything you need is in my sig. (Except triangle away.
Sent from my SGH-T999L using xda premium

DocHoliday77 said:
No. You can use odin.
I'd suggest Odin flash the root66 firmware, then use triangle away, then odin the stock firmware. Thats it!
Everything you need is in my sig. (Except triangle away.
Sent from my SGH-T999L using xda premium
Click to expand...
Click to collapse
so i have UVALEM and i noticed that when i click on the T999_UVALEM it sends me to a link called minus(dot) com???
also does it matter if i download this:
"((Old Image
Note: This is based off of the stock image TMO T999UVALH2 (August 4.0.4 ICS)
Perm Mirror: Download - root66_TMO_T999UVALH2.7z))"
if i am a UVALEM since i noticed its from UVALH2?

Ill check the link in a few. Just got home. But any of the official firmware should be fine to use (assuming you're doing this for warranty)
Not sure what ypu were asking about UVALEM and UVALH2.
LEM was the original firmware when first released.
LH2 was the last official ICS release.
Either one should be ok to use.
Sent from my SGH-T999L using xda premium

DocHoliday77 said:
Ill check the link in a few. Just got home. But any of the official firmware should be fine to use (assuming you're doing this for warranty)
Not sure what ypu were asking about UVALEM and UVALH2.
LEM was the original firmware when first released.
LH2 was the last official ICS release.
Either one should be ok to use.
Sent from my SGH-T999L using xda premium
Click to expand...
Click to collapse
i thought we were supposed to be consistent with the Baseband version. since mine says T999UVLEM i thought i was only supposed to DL files that said UVALEM..lol ok, im probably making this harder on myself than it really is. im getting it now. but im still not able to download the Firmware. keeps directing me elsewhere.
EDIT: i see what you mean now. i have right now 4.0.4 ICS,
so i went ahead and started to download the latest route66 for JB 4.1.2....instead of the 4.0.4... (i thought i was supposed to stay with 4.0.4 lol)
so does the baseband change according to the firmware?
also the Route66 4.0.4 ICS is the one that the link is broken.

omar4578 said:
i thought we were supposed to be consistent with the Baseband version. since mine says T999UVLEM i thought i was only supposed to DL files that said UVALEM..lol ok, im probably making this harder on myself than it really is. im getting it now. but im still not able to download the Firmware. keeps directing me elsewhere.
EDIT: i see what you mean now. i have right now 4.0.4 ICS,
so i went ahead and started to download the latest route66 for JB 4.1.2....instead of the 4.0.4... (i thought i was supposed to stay with 4.0.4 lol)
so does the baseband change according to the firmware?
also the Route66 4.0.4 ICS is the one that the link is broken.
Click to expand...
Click to collapse
Ok, I see what you meant now. I think youve got yourself on the right track now though. The firmware includes everything you need. It will update your system, modem, recovery, kernel as well as several other partitions (you dont need to ever worry about them though)
So Yes, if you flash the MD5 firmware, you will end up with the latest of everything. Your baseband will change to MD5 along with everything else.
The Root66 firmware isn't mine. MrRobinson has a thread dedicated to it and I only direct link to his files just to make them easy to find. I think he took down some of the early ones, or minus.com may have terminated his account. Ill mention it to him, but I wouldnt worry about it and just flash one of the others he has available.

The baseband comes with the firmware, so it does not matter which firmware you odin
Sent from my SGH-T959V using xda premium

Please read forum rules before posting
Questions and help issues go in Q&A and Help section
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator

DocHoliday77 said:
Ok, I see what you meant now. I think youve got yourself on the right track now though. The firmware includes everything you need. It will update your system, modem, recovery, kernel as well as several other partitions (you dont need to ever worry about them though)
So Yes, if you flash the MD5 firmware, you will end up with the latest of everything. Your baseband will change to MD5 along with everything else.
The Root66 firmware isn't mine. MrRobinson has a thread dedicated to it and I only direct link to his files just to make them easy to find. I think he took down some of the early ones, or minus.com may have terminated his account. Ill mention it to him, but I wouldnt worry about it and just flash one of the others he has available.
Click to expand...
Click to collapse
Thank you very much for your help! everything worked perfectly and now i have more knowledge of the rooting process. quite easy once you get the hang of it!
dukeoflove said:
The baseband comes with the firmware, so it does not matter which firmware you odin
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
Thank you for your help!
kennyglass123 said:
Please read forum rules before posting
Questions and help issues go in Q&A and Help section
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
Click to expand...
Click to collapse
thank you kenny sorry about that :/

[Q] Free Unlock 4.1.2 Flashing Modem

I have seen many posts on this issue but I still didn't get a clear answer. Since many had the same issue thought this mat deserve a thread. I am a new bee hence the questions.
We know that the free unlock does not work with 4.1.2.
We also know from several threads that flashing older modem solves the problem
atti317ucalj2modemfixed from previous threads (several thanks to other users who provided this information)
I am having some difficulties in updating the modem
I provided modem.bin file in Odin & used Phone button and Auto reboot. Odin fails to upload the modem. Am I doing something wrong?
Can I directly upload modem.bin or do I need to convert it into something else (tar)?
Am I getting the correct modem (baseband) files?
What is the best way to flash or install the modem/baseband without rooting the device. I don't have an option of rooting as I need to connect my phone through Good (does not work on a rooted device)
Any help will be appreciated.

You need to flash the entire 4.1.1 ROM. Not just the modem. Once you unlock by using the instructions in one of the existing threads you can simply hit the update button and go back to 4.1.2
Sent from my SAMSUNG-SGH-I317 using xda premium

Intub8 said:
You need to flash the entire 4.1.1 ROM. Not just the modem. Once you unlock by using the instructions in one of the existing threads you can simply hit the update button and go back to 4.1.2
Sent from my SAMSUNG-SGH-I317 using xda premium
Click to expand...
Click to collapse
Thanks
Based on what I have read from the forums, people still can't access certain options in the modem after flashing the entire rom. Have you tired it? Which rom have did you use? Samsung-Updates.com-SGH-I317_ATT_1_20121005095854_bpaaavv07o.zip from hot files?

Please read forum rules before posting
Questions and help issues go in Q&A and help section
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator

chicago_summer said:
Thanks
Based on what I have read from the forums, people still can't access certain options in the modem after flashing the entire rom. Have you tired it? Which rom have did you use? Samsung-Updates.com-SGH-I317_ATT_1_20121005095854_bpaaavv07o.zip from hot files?
Click to expand...
Click to collapse
Yes I have done it. The reason people don't see all of the options is besauce they aren't flashing the full stock 4.1.1 ROM. I get mine from www.sammobile.com
Sent from my SAMSUNG-SGH-I317 using xda premium

chicago_summer said:
What is the best way to flash or install the modem/baseband without rooting the device. I don't have an option of rooting as I need to connect my phone through Good (does not work on a rooted device)
Well that's the easiest way to flash anything on the phone!! Is using TWRP recovery.
You can try this then, when your done you can UN root it thru the superuser app.
But start here:
http://forum.xda-developers.com/showthread.php?t=2004650
Any help will be appreciated.
Click to expand...
Click to collapse
Sent from my Galaxy Nexus using Tapatalk 4 Beta

[ROM][NDC][STOCK][4.4.2][KITKAT][ROOTED][ODEXED/DEODEXED]- Virgin Mobile/Boost Mobile

STOP!!! PLEASE READ!!! Before you flash this zip file in recovery, you MUST FIRST flash either the NDC tar(see below for link),
or the ND8 tar, in order to obtain the KK bootloader and modem. If you flash this directly over JellyBean bootloader, you WILL brick!!
Alright folks, here we go again. Just as the title says, this is the NDC 4.4.2 Kit Kat update for Boost/VM in flashable zip.
Stock, rooted, busybox, zipaligned, odex or deodex. That’s it. Pretty basic. More to come in the future, but this should be enough
to keep you busy for awhile. Enjoy!
Notes: PLEASE READ!
1. In order for this to work, you need to flash the NDC tar first! Flashing the tar will/should not wipe your data.
2. And yes, NDC tar does come with Knox, so if you flash the tar, you have Knox. And if you flash CWM via Odin to flash this,
it WILL trip Knox, thus voiding your warranty.
3. This MAY cause you to lose your modem, but not to fear, we got you covered.
Thanks:
Google, Samsung, XDA – For obvious reasons
@JustArchi – For the Kitchen
@Phil3759 - For your awesome recovery
 @Agent4834 – For catching the tar ball in Kies
 @Chainfire – SuperSU and everything else you do and continue to do. You’re a magician.
@CNexus – For being there to bounce ideas off of, keeping me out of trouble!
@tdunham - For being a great sounding board and resource! So glad you’re on the S5 now!
@moonknightus- - For the modem. Good looking out brother.
Download Links:
Stock Tar OP
Stock Odex
Stock Deodex
NDC Modem
Flashing Instructions: (After flashing the NDC tar)
1. Download the ROM of your choice to your phone.
2. Download the modem to your phone.
3. Flash your latest TWRP, CWM, Philz, recovery, whatever you are using through Odin.
I personally use Philz, exclusively. Found Here
4. Reboot to recovery, wipe cache/dalvik
5. Flash rom, takes a few minutes
6. Flash modem.
7. Reboot
8. Profit
Click to expand...
Click to collapse
Disclaimer: I am not responsible for whatever you do with your phone. Please flash at your own risk!
Issues:
1. Kills Modem - Solved, just flash the modem in the link!
2. Conflicts with the "MobileZone," whatever that is - Solved - See Post #2
3. This is an early run, so there may be hiccups. You tell me!

This is from jmatherly11, over at Android Forums, who found a good way to get rid of the "Samsung" title in the drop down, as well as some other stuff.
For those of you that are seeing "Samsung" in the pull down menu as well as the network type displaying "Samsung" there is a fix in the PlayStore, its called "Refresh Customization" by Samsung MNO Labs. This will factory reset your phone after you download select the first option called "Refresh Customization Opt1," if it is unsuccessful try "Opt2." This fixed my phone after the KitKat upgrade and if your like me and use Sensorly to map Sprint's network it will not correctly map the info because Sensorly thinks you on a network called "Samsung."
This app was designed for Samsung Galaxy devices ONLY running on Sprint's networks. If a Samsung device's initial customization settings has been lost due to the system upgrade to the KitKat platform then this is your fix. This also repairs the "My Account" app that displays "MobileZone."
Also my device is completely stock on 4.4 so for those of you that are rooted I have no idea if this will work.
His original post: Original Post

One More

Nice!
Sent from my ASUS Transformer Pad TF300T using Xparent Purple Tapatalk 2

jdsingle76 said:
Alright folks, here we go again. Just as the title says, this is the NDC 4.4.2 Kit Kat update for Boost/VM in flashable zip.
Stock, rooted, busybox, zipaligned, odex or deodex. That’s it. Pretty basic. More to come in the future, but this should be enough
to keep you busy for awhile. Enjoy!
Notes: PLEASE READ!
1. In order for this to work, you need to flash the NDC tar first! Flashing the tar will/should not wipe your data.
2. And yes, NDC tar does come with Knox, so if you flash the tar, you have Knox. And if you flash CWM via Odin to flash this,
it WILL trip Knox, thus voiding your warranty.
3. This MAY cause you to lose your modem, but not to fear, we got you covered.
Thanks:
Google, Samsung, XDA – For obvious reasons
@JustArchi – For the Kitchen
@Phil3759 - For your awesome recovery
@Agent4834 – For catching the tar ball in Kies
@Chainfire – SuperSU and everything else you do and continue to do. You’re a magician.
@CNexus – For being there to bounce ideas off of, keeping me out of trouble!
@tdunham - For being a great sounding board and resource! So glad you’re on the S5 now!
@moonknightus- - For the modem. Good looking out brother.
Download Links:
Stock Tar OP
Stock Odex
Stock Deodex
NDC Modem
Disclaimer: I am not responsible for whatever you do with your phone. Please flash at your own risk!
Issues:
1. Kills Modem - Solved, just flash the modem in the link!
2. Conflicts with the "MobileZone," whatever that is - Solved - See Post #2
3. This is an early run, so there may be hiccups. You tell me!
Click to expand...
Click to collapse
awesome work JD, I don't post a lot because I do a lot of reading and I find I do not usually have to post because if you do your research everything is covered. But this one has me concerned as it seems a little out of my league. I do not think I am a noob but, not far past. I have a galaxy s3 I rooted it myself and I'm running 4.3., I noticed you mentioned Odin and flashing my custom recovery, I am already running clockworkmod do I have to use Odin? Can't I just flash that car and then the zip using the custom recovery I already have? It's business as usual right? Just flash those items in the order and then the new modem and I'm good to go? And if I have to revert back to back up will I be able to do that? Will I be able to revert back to 4.3? Just a little nervous and thank you for all of your hard work and answering my question in advance. I love the work you guys do and I think it's awesome everyone in this community stick together and help each other. Anyways I will lay back in the bushes and patiently watch for a response!

Xanafuego said:
awesome work JD, I don't post a lot because I do a lot of reading and I find I do not usually have to post because if you do your research everything is covered. But this one has me concerned as it seems a little out of my league. I do not think I am a noob but, not far past. I have a galaxy s3 I rooted it myself and I'm running 4.3., I noticed you mentioned Odin and flashing my custom recovery, I am already running clockworkmod do I have to use Odin? Can't I just flash that car and then the zip using the custom recovery I already have? It's business as usual right? Just flash those items in the order and then the new modem and I'm good to go? And if I have to revert back to back up will I be able to do that? Will I be able to revert back to 4.3? Just a little nervous and thank you for all of your hard work and answering my question in advance. I love the work you guys do and I think it's awesome everyone in this community stick together and help each other. Anyways I will lay back in the bushes and patiently watch for a response!
Click to expand...
Click to collapse
Question 1: Do you have to use Odin?
Answer: You'll need to be on the ND8 or NDC bootloader for this to work. When he says you have to use Odin, he means for flashing the stock tar for either the Sprint ND8 or the Boost/Virgin NDC ROMs. The tar files can't be flashed from recovery and please don't try to use Mobile Odin, as it doesn't like ND8/NDC.
Question 2: Can you revert back to 4.3?
Answer: You can revert to 4.3 insomuch as using a 4.3 ROM. You can either flash a 4.3 zip from recovery or restore a CWM/TWRP/etc. backup . You will not be able to revert your modem or bootloader to anything prior to ND8 after flashing the ND8/NDC bootloader. It just doesn't work.
Hope that helps.

Hey thank you that was very helpful, so I will have to go to the library today and use Odin. . and flash stock tar for virgin. Very complicated, but with these instructions I can do it ... So I 100% cannot use mobile Odin..,. ? Thank you my friend. Just wish I could update now w/o PC. Cheers
Sent from my SPH-L710 using XDA Premium 4 mobile app

Xanafuego said:
Hey thank you that was very helpful, so I will have to go to the library today and use Odin. . and flash stock tar for virgin. Very complicated, but with these instructions I can do it ... So I 100% cannot use mobile Odin..,. ? Thank you my friend. Just wish I could update now w/o PC. Cheers
Sent from my SPH-L710 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I would not use mobile Odin to flash full tars. That's over 1.5gb you're trying to flash, and one thing goes wrong, you will probably brick. Good luck!
Sent from my SM-G900P using XDA Free mobile app

awesome work @jdsingle76 - absolutely love that you put these together for us off contract folks !! very cool of you to take the time - and oh so much appreciated !!!

I wanna try the stock rooted deodexed version

mudflap2.0 said:
I wanna try the stock rooted deodexed version
Click to expand...
Click to collapse
Lol....then try it
Sent from my SM-G900P using XDA Free mobile app

Edit. Please ignore.

Definitely try it - been on it for a few hours now and its great work - plus . I definitely think 4.4 is much smoother than 4.3 was - very happy ?☺
Sent from my SPH-L710 using Tapatalk 2

Im VM but already flashed ND8. Working perfect so far and I dont mind the sprint labels as I used to be a sprint user before. Will the NDC be any better for my phone?
Sent from my SPH-L710 using XDA Free mobile app

eurohunter said:
Im VM but already flashed ND8. Working perfect so far and I dont mind the sprint labels as I used to be a sprint user before. Will the NDC be any better for my phone?
Sent from my SPH-L710 using XDA Free mobile app
Click to expand...
Click to collapse
Most notice no change but you may have better reception with the NDC modem, no guarantees. They are about the same, just carrier specific. You can always flash back to ND8 tar if you do decide to try it, just fyi.
Sent from my SM-G900P using XDA Free mobile app

I'm with boost mobile and currently wicked x rom installed. Is it possible just flash ndc modem only?

jimmyyi said:
I'm with boost mobile and currently wicked x rom installed. Is it possible just flash ndc modem only?
Click to expand...
Click to collapse
The quote below is from the wicked x thread.... He would say yes.... But have a backup handy just in case....
wetbiker7 said:
Right now I'm running the ND8 bootloader, NDC Modem, and the newest Sprint PRL along with the proxy changes. I'm getting better radio reception not to mention the increase in download speed. It looks like I've found a good combination.
Sent from a Wicked S3 running Wicked-X.
Click to expand...
Click to collapse
Sent from a Wicked Virgin Mobile Samsung Galaxy S3 running KT747 Kernel on KITKAT Touchwiz.

Can anyone tell me if the 4.4.2 can be rooted? I rooted several phones but the boost galaxy s3 will not root for some reason. :banghead:
Sent from my SPH-L710 using XDA Free mobile app

Rodnelson23 said:
Can anyone tell me if the 4.4.2 can be rooted? I rooted several phones but the boost galaxy s3 will not root for some reason. :banghead:
Sent from my SPH-L710 using XDA Free mobile app
Click to expand...
Click to collapse
I had no problem. I just flashed supersu through recovery and done. That fails for you?

Kreatur3 said:
I had no problem. I just flashed supersu through recovery and done. That fails for you?
Click to expand...
Click to collapse
Can I ask if it was this SU zip : v1.99r4.zip ? I was going to flash that because I keep getting that I need to update binaries - I am using the play store version rite now -
Sent from my SPH-L710 using Tapatalk 2

[Q] Stock Recovery

Hello, and again, thanks in advance for this.
I have searched all over the internet, and I can not seem to find a stock ZVC recovery image for the Sprint LS980.
My friend is not tech savy, and I am tired of having to fix his screw ups, so I just want to put him on stock, but I dont have the download speeds to download the full firmware where I am at. Can anyone please link me to a stock recovery.img (preferably ZVC).
He is just stock rooted, so I just want him on stock recovery so he cant mess it up. I am gonna remove his root after too.
Again, Thank you again. It is much appreciated.

Bump
Sent from my LG-LS970 using XDA Free mobile app

hello the stock ZVC.TOT file can be found on this tread Here
any other questions please ask and quote me so i am notified

Dethkid2008 said:
hello the stock ZVC.TOT file can be found on this tread Here
any other questions please ask and quote me so i am notified
Click to expand...
Click to collapse
Thank you. My internet speeds are being upgraded Monday so now I can actually download things decently fast. Thanks again!
Sent from my LG-LS970 using XDA Free mobile app