Develop Bugs

[Tutorial] How to install a Cusotm Rom

requirements:
-S-OFF or UNLOCKED Bootloader
-CWM Recovery
installation:
1. start phone in bootloader and choose Recovery System.
2. If no ext3 partition is present (note: data on the FAT32 partition hosting will be deleted):
select: Advanced --> "partition SD card" and partition SD card with the following values​​: ext 1Gb, Swap 0
3. connect your Wildfire S via USB to the PC and select: "mounts and storages" --> "mount USB storage" (the computer can connect to your SD card)
4. push the "Rom.zip" on the SD card's memory and SD card back "unmount"
5. Delete data (full wipe) by:
wipe data / factory default
wipe cache
advanced --> wipe Dalvik Cache
mount and storage --> format / sd-ext
By "install zip from SD Card" --> "choose zip from SD" select Zip file and flash.
By "Reboot" restart the phone again
if you had any questions to me, just write

can't find installed apps for lg optimus g

also when i go into recovery (i have twrp) i do the following
1) i choose install zip
2) choose zip from sdcard
then i have the following options
0/
ers backups/
clockworkmod/legacy/
obb/
so, evertime i try to install any zip from the sd card it always says no data.. but this 0/ folder is where everything is stored but yet it always no data, no data, and i can't zip anything

ROIDSTL said:
also when i go into recovery (i have twrp) i do the following
1) i choose install zip
2) choose zip from sdcard
then i have the following options
0/
ers backups/
clockworkmod/legacy/
obb/
so, evertime i try to install any zip from the sd card it always says no data.. but this 0/ folder is where everything is stored but yet it always no data, no data, and i can't zip anything
Click to expand...
Click to collapse
Enter "0/" forder, in KK all data SD is in "0/"

ROIDSTL said:
also when i go into recovery (i have twrp) i do the following
1) i choose install zip
2) choose zip from sdcard
then i have the following options
0/
ers backups/
clockworkmod/legacy/
obb/
so, evertime i try to install any zip from the sd card it always says no data.. but this 0/ folder is where everything is stored but yet it always no data, no data, and i can't zip anything
Click to expand...
Click to collapse
Some recovery mount sdcard to /mnt/sdcard or /mnt/???. Stock CWM did that and I have to copy zip file to /0 folder in that location to flash app.

[Q] Problem with flashing a rom.

Hey guys, i'm a beginner that wanna to flash a rom to my galaxy w. From http://forum.xda-developers.com/show....php?t=2780150 , the instruction given was
Use latest CWM
Wipe data/factory reset
Format system
Format Sdcard0
Install the ROM
Install gapps
but then in my recovery page, i only have wipe data and wipe cache option, don have format system and format sdcard option, how?

tanchinyan said:
Hey guys, i'm a beginner that wanna to flash a rom to my galaxy w. From http://forum.xda-developers.com/show....php?t=2780150 , the instruction given was
Use latest CWM
Wipe data/factory reset
Format system
Format Sdcard0
Install the ROM
Install gapps
but then in my recovery page, i only have wipe data and wipe cache option, don have format system and format sdcard option, how?
Click to expand...
Click to collapse
Check in mounts and storage.

Harakhti said:
Check in mounts and storage.
Click to expand...
Click to collapse
Thanks, btw I needed to put the rom zip file inside the sdcard in order to install, but after i format the sdcard0, the zip file wont be wipe out?

tanchinyan said:
Thanks, btw I needed to put the rom zip file inside the sdcard in order to install, but after i format the sdcard0, the zip file wont be wipe out?
Click to expand...
Click to collapse
It will be. You can mount the phone in mass storage mode with "Mount USB storage" to copy the zip over after, however. Most people here use an external SD (sdcard1).

I installed outdated CWM version and wiped out custom ROM. How do i fix this?[HTC M8]

In recovery I have only these options:
-reboot system now
-apply from sd card
-apply from phone storage
-apply from cache
-wipe data/factory reset
-wipe cache partition
....
When to apply any .zip from sd card it says "write host_mode: 0 done"

how can i flash cm12 or cm13 after Installed stock test KDZ

Here is what I did:
Installed stock test KDZ using LG Flash Tool2014
Rooted via one click
Fixed partition size
Installed flashily
Installed TWRP via flashily
Installed stock 4.4 rooted rom from XDA
Flashed stock recovery from XDA
And then ?

this will remove EVERYTHING from your device.. apps, contacts, anything in the internal storage.... everything but the SD Card
move the CM12.1\CM13 file (leave it as zip file) (of your device v400\v410\v700...) and GApps file (leave it zip as well) (from opengapps.org (ARM) or any other good source but make sure it's nano or pico and the version that is compatible with the Android version (CM12.1 >> 5.1.1 CM13 >> 6.0.1) ) move them to your SD Card (External).
go to TWRP.. (the same way as you enter factory reset menu then choose > yes > yes).
backup your rom to SD card.
then choose wipe > Advanced wipe > check system + data + dalvic + cache + internal storage (MAKE SURE YOU DON'T CHECK EXTERNAL STORAGE) swipe to wipe.
then go back.. install .. choose zip.. choose External Card and choose the CM file.. swipe .. again install then choose GApps file.. after that there is an option wipe dalvic and cache.. choose it.. then Reboot and DONE!
have a good time

Dr.TheMaster said:
this will remove EVERYTHING from your device.. apps, contacts, anything in the internal storage.... everything but the SD Card
move the CM12.1\CM13 file (leave it as zip file) (of your device v400\v410\v700...) and GApps file (leave it zip as well) (from opengapps.org (ARM) or any other good source but make sure it's nano or pico and the version that is compatible with the Android version (CM12.1 >> 5.1.1 CM13 >> 6.0.1) ) move them to your SD Card (External).
go to TWRP.. (the same way as you enter factory reset menu then choose > yes > yes).
backup your rom to SD card.
then choose wipe > Advanced wipe > check system + data + dalvic + cache + internal storage (MAKE SURE YOU DON'T CHECK EXTERNAL STORAGE) swipe to wipe.
then go back.. install .. choose zip.. choose External Card and choose the CM file.. swipe .. again install then choose GApps file.. after that there is an option wipe dalvic and cache.. choose it.. then Reboot and DONE!
have a good time
Click to expand...
Click to collapse
THANKS YOU OS MUCH！Now i find i cannot flash CANDYROm ,
I stayed in the brush machine interface for a long time , but it is not successful , so I can only flash KDZ :crying:again