Please help!My phone dead! - Galaxy Ace II Q&A, Help & Troubleshooting

Hi all!
I have an bricked galaxy ace 2 I8160P version and please,please if anyone can help me cause it`s my friend phone and i won`t to buy it another
I don`t know cause it`s an I8160P version and i flash with ODIN an non-p firmware.In ODIN appears succesfull,like everything it`s normal but when i try to open the phone,i realise it`s dead.And afther that i find it`s and P version.
My problem it`s i can`t get into Download Mode or Recovery.Pone it`s totally dead,screen doesn`t turn on.So,it`s any way to unbrick this phone?Or it`s forever dead?
I really apreciate any kind of help,tips..anything.I`m little disparated.Thanks!
EDIT:Solved!Please delete this post.Thanks!

How did you solve it? If you explain it will be so much helpful for other people who kill their phone :laugh:

Related

GM730 help to revive..

i got same problem..my phone GM730 fully working
only i want to make change languade
First i flash the phone with this version
GM730AT_V10c-CIS-XX-SEP-30-2009-RUSSIA.crc
GM730AT_V10j-ESA-XX-DEC-01-2009-INDIA.crc
GM730AT_V20h-SGP-XX-JAN-19-2010-SINGAPORE.crc
after flashing with vygisbox!.. my phone can't power on!!! but can EMERGENCY MODE!...
then i try to flash another version..
GM730f:
GM730fAT_V10a-334-020-AUG-10-2009-MEXICO.crc
GM730fAT_V10d-505-01-AUG-18-2009-AUSTRALIA.crc
GM730E
GM730eAT_V20k-CHN-XX-DEC-14-2009-CHINA.crc
..
still in bad luck..
please anyone can help to fix this kind! stranged problem
Br..adonis1279
is there any other Free sofware to rivive my phone...

Samsung Wave S8500 hang on bada logo

Hi my Wave s8500 hang on the bada logo when start..It has been flashed using jtag because previously it had a dead boot problem. Now, I am again able to install firmwares successfully using multiloader but the phone freezed on the bada logo while booting. Please can somebody help...
try other firmware
hello
what's your firmware version and csc you try to install ?
Hello
I have tried several firmwares...It still hang at bada logo..This problem arise only after the phone has been repaired using jtag. The phone went into dead boot after I once trying to update the firmware(read my introduction above). A technician managed to revived the phone but now it boot and hang at the bada logo despite trying several firmwares(1.0,1.2,2.0)..Can any expert please help me out?Thanks in advance.
Strange.
Maybe it is the same problem than here?
Check if you don't forget something.
You can try to pull battery out too, sometimes it helps.
Nothing happens. I have tried
Do you have a riff box?
No I dnt have..I am no technician dude.
Did you save your NAND image before overwriting?
No..I just flashed.
Did you manage to fix your device ?
If you haven't any other alternative you can try the Unbrickable mod.
But before doing this you should be sure that you can't do anything else because you may definitely kill your device. So wait a bit.
As you are able to get the boot logo it should be fixable in some way.
If someone see what goes wrong the problem...
rey2012 said:
Hi my Wave s8500 hang on the bada logo when start..It has been flashed using jtag because previously it had a dead boot problem. Now, I am again able to install firmwares successfully using multiloader but the phone freezed on the bada logo while booting. Please can somebody help...
Click to expand...
Click to collapse
hi, few days back , i was also facing such problems, don't worry its curable ,
try latest Multiloader v5.67 , (dont try older versions)
download Multiloader v5.67 from here http://www.mediafire.com/?s59s0xq99uj5bq7
dont flash boot file and other file from firmware at same time, step by step process is given here http://forum.xda-developers.com/showthread.php?t=1661002
hope it can help you out, it worked for me, hope works for you too.....
TC
Always do good things in this world.....JMK...
Hello
The multiloader 5.7 interface is not correct..Please check
you need JTAG boot again but with riff box becuse JTAG ORT-BOx OR other give that problem ... this was happen to me and i fix my phone With RIFF
Sorry
Thanks for ur advice. I dnt have this equipment. The phone still have this problem. I need to show it to a professional which is very rare here.

Galaxy Wonder Brick Help Me Pleace :(

hello everyone my galaxy wonder don't turn on and i can't enter in download mode and recovery mode i try all possible metod...but nothing...
Someone can help me pleace..?
Sorry for my bad english...
can you please tell us.. what did you do before to your phone?
details please?
Sent from my GT-I8150 using xda
Seems like you had accidentally hard-bricked your phone, if that really happen the only solution is send back to Samsung Service Centre as you will have to replace your mainboard, anyway please tell a little bit more details so we can confirm what had happened to your phone
MyDeSTiNaTe said:
Seems like you had accidentally hard-bricked your phone, if that really happen the only solution is send back to Samsung Service Centre as you will have to replace your mainboard, anyway please tell a little bit more details so we can confirm what had happened to your phone
Click to expand...
Click to collapse
i flesh a recovery maybe this is the problem so i can't boot the phone so i can buy a jig dongle to try by myself to work the phone or assisstence...
flash, what steps had you done?
it should be safe..

[Q] Is my phone bricked or could it be saved ?

I flashed a rom to my device from needrom website. It was a custom rom based on the latest test version b116 with samsung s4 UI. After the device rebooted itself the vibration started and never stopped since then. .The phone booted but screen is used upside down I mean for the button at the bottom you need to touch at the top of the screen etc. I tried updating with official b111 using sdcard but it doesnt work. The recovery starts but it fails everytime ı try it. I just bought the phone 3 days ago and now ı can not use it anymore it is very annoying. Can anyone please help me ??
semihgumusay said:
I flashed a rom to my device from needrom website. It was a custom rom based on the latest test version b116 with samsung s4 UI. After the device rebooted itself the vibration started and never stopped since then. .The phone booted but screen is used upside down I mean for the button at the bottom you need to touch at the top of the screen etc. I tried updating with official b111 using sdcard but it doesnt work. The recovery starts but it fails everytime ı try it. I just bought the phone 3 days ago and now ı can not use it anymore it is very annoying. Can anyone please help me ??
Click to expand...
Click to collapse
I cnt get u people u are messin with your phones .. u ar crazy .. what the hell u want some crappy s4 rom ? so go and buy galaxy s4 then .. ?
jesus ..
GalaxySIIII said:
I cnt get u people u are messin with your phones .. u ar crazy .. what the hell u want some crappy s4 rom ? so go and buy galaxy s4 then .. ?
jesus ..
Click to expand...
Click to collapse
It is not a s4 rom. ıt is just a customized rom based on original p6 rom. ıf you can not help me please do not "mess up" the forum. ı am lookin for someone who can help me !!!
If the ROM is based on B116, try putting the official B116 firmware on your SD-card (via another phone, flashcard reader, whatever) and try reflashing the phone that way. Reflashing obviously done by holding volume UP + DOWN keys pressed, turning the phone on while keeping UP and DOWN pressed, and letting the phone force-flash that firmware.
Let me know if it helped.
semihgumusay said:
It is not a s4 rom. ıt is just a customized rom based on original p6 rom. ıf you can not help me please do not "mess up" the forum. ı am lookin for someone who can help me !!!
Click to expand...
Click to collapse
am not messing up nothing .. u messed up your phone .. why u not just satisfied what u got ..
do u have recovery in the phone ? u need to copy official rom and flash it via cwm ..
right now ı am downloading b116 but i think it will take more than 2 hours maybe because of the overload on the server it is being downloaded. ı was gonna try that but ı am not sure if it works but ı will try. unfortunately I don't have cwm installed on the device. and in the recovery mode ı can not do anything with the buttons
btw thank you so much Bakpoeder for you help. ı will definitely let u know about if it works . now ı am waiting for the download to be finished. and the problem ı faced while trying to update with a lower version is that even though ı put the update package into dload folder in sdcard it says no update package is it possible if the device can not read the sdcard ?
semihgumusay said:
btw thank you so much Bakpoeder for you help. ı will definitely let u know about if it works . now ı am waiting for the download to be finished. and the problem ı faced while trying to update with a lower version is that even though ı put the update package into dload folder in sdcard it says no update package is it possible if the device can not read the sdcard ?
Click to expand...
Click to collapse
if u doing it via recovery u need zip file i suppose .
Thank u guys for ur help. ı think ı will try to flash/update it tomorrow because the download speed is very slow. ı will let u know if any of these method works. btw if there is anyone with a different idea ı would appreciate it. ıf none of these method work ı think ı will have to go to service center
ı have a big problem now
ı tried to apply update from sdcard but the phone doesn't recognize the sdcard. and now ı have another problem ı can not recharge the battery ı will go to service center hopefully they fix the device
Same Problem
Hi there what hapend with your P6 mate??
i have the same prob here.. i try to put new firmware and at 50% of updating the phone shutdown and now when i turn it on just only vibrates all the time and the touchscreen doesn't works only the side buttons
i tryied to install new firmware ( P6_firmware(P6-U06,Android_4.2,Emtion_UI,V100R001C00B111,Nornal,05011RJP) but when i press update from sd card i cant see what inside...
anyone help?
Absolut22 said:
Hi there what hapend with your P6 mate??
i have the same prob here.. i try to put new firmware and at 50% of updating the phone shutdown and now when i turn it on just only vibrates all the time and the touchscreen doesn't works only the side buttons
i tryied to install new firmware ( P6_firmware(P6-U06,Android_4.2,Emtion_UI,V100R001C00B111,Nornal,05011RJP) but when i press update from sd card i cant see what inside...
anyone help?
Click to expand...
Click to collapse
You should send it to the service center. I tried everything but ı couldn't fix it. Now the device is in the service cervice it's been couple of days and still waiting. I hope the warranty covers it :crying:
sames its happen to me ! but its the recovery has been deleted for me !

my note 2 stuck !!! plz help

Hello , guys i have a problem that my mobile restarted it self then it stuck on samsung galaxy note 2 screen !! i cant enter recovery mod when i try the same result with the screen , but i can enter download mod i didnt do anything , help me plz guys and thnx
so guys i cant enter safe mod also and my note 2 doesnt charge while i try to charge it
sorry for my poor english
Hey!
Was the phone rooted? Did you messed with it? If yes, with what? You can try to flash a stock FW with Odin and see if this solves your issue. If not, you might wanna get your phone to a service. But I really think it's not the case. If you can get in Download mode, you can fix it. Read more here.

Categories

Resources