Develop Bugs

[Q] Kies 3 Unsupported device alert

Does anyone else get an error with Kies 3? when I connect my Edge Kies gives me an error! I want to perform a device recovery via Kies that's my last hope. I tried to root my Edge and now I'm stuck with a bricked phone and yes I have tried Odin 3.10.6 and regular s6 Auto Root from Chainfire as well. nothing works for me, I've looked everywhere to find the G925t firmware but no luck again. I'm really screwed.:crying:

Same

I'm guessing kies wont recognize it til after 4/10 since technically nobody is supposed to have it yet. Just a guess though.

dcmtnbkr said:
I'm guessing kies wont recognize it til after 4/10 since technically nobody is supposed to have it yet. Just a guess though.
Click to expand...
Click to collapse
same issue here. Had to use smart switch which is not as efficient from my old galaxy to the new one. Transfer stopped and had to restart 2nd time which did seem to complete.
Helium is much better for transferring data to new phone..

Same issue here. New Galaxy S6 and Kies 3 won't allow it: Unsupported device alert. WFT?

acana79 said:
Same issue here. New Galaxy S6 and Kies 3 won't allow it: Unsupported device alert. WFT?
Click to expand...
Click to collapse
Do the following: open Kies, click on tools, Firmware upgrade and initialisation, enter your model number and serial number and let it download the firmware, after an hour or so depending on your connection speed the firmware will be downloaded and your phone will reboot into recovery to install the firmware. done

Use Samsung Smart Switch instead. It has replaced Kies for the newer phones.
Here is my video showing it being used to flash Stock Firmware to the Edge.
http://forum.xda-developers.com/tmo...p/flash-stock-firmware-using-samsung-t3079176

Supersport, I have a SM-G900A (Galaxy S5 ATT) and Kies 3 and Smart Switch says it is an unsupported device. I got to the part to enter the model and serial and it comes up unsupported again. I tried a different USB cable and also tried Smart Switch on a Mac. The white USB3 Samsung cable does not allow the phone to be recognized by the Mac so I used an old USB2 cable and it hangs on "connecting to your device".
I tried downgrading to Android 4.4.2 so I could root it and it is in the "firmware encountered an issue" screen with the yellow triangle. Ack!

Boysterload said:
Supersport, I have a SM-G900A (Galaxy S5 ATT) and Kies 3 and Smart Switch says it is an unsupported device. I got to the part to enter the model and serial and it comes up unsupported again. I tried a different USB cable and also tried Smart Switch on a Mac. The white USB3 Samsung cable does not allow the phone to be recognized by the Mac so I used an old USB2 cable and it hangs on "connecting to your device".
I tried downgrading to Android 4.4.2 so I could root it and it is in the "firmware encountered an issue" screen with the yellow triangle. Ack!
Click to expand...
Click to collapse
It sounds like the MAC had issues with installing the driver. I'm not positive if your model is supported by Smart Switch yet, but I would suggest using Smart Switch as KIES has stopped official support for most of the newer models. If it's not supported yet, it should be soon. They keep adding devices. When I got my S6 Edge, it took about a week for it to be supported, but that's when Smart Switch had just come out too. Wish I was more help.
Anyone else have success getting this model to flash???

Bootloop
I initially used odin to flash OI1 update, after a rom I was using caused problems and I got bootloop. It changed bootloader value to b:3 and I'm unable to downgrade now so I used smart switch which didn't recognize device so used emergency recovery and still bootloop. I have factory reset and wipe cache multiple times along with adb side load and individual flashes of bootloader, modem, kernel, flashed custom kernel and twrp to access fix permissions and to mount partitions with advanced wipe etc and still wont boot past logo. Also during one fix attempt phone said can't mount system.. Idk I'm not understanding where the problem is .everything says successful but I'm still in bootloop. Please help. I've spent hours everyday for the past week searching & trying different things that seem might help so open to any suggestions.

I seem to be having the same issue. Tried to manually update my phone via Odin but nothing has worked so far.... Now I just get an error on my phone that says
"An error has occured while updating the device software. Use the Emergency recovery function in the Smart Switch PC software."
What am I missing here?? It's a Samsung phone, and it's been around for over a year (S6 Edge T-Mobile)...

ieatcalcium said:
I seem to be having the same issue. Tried to manually update my phone via Odin but nothing has worked so far.... Now I just get an error on my phone that says
"An error has occured while updating the device software. Use the Emergency recovery function in the Smart Switch PC software."
What am I missing here?? It's a Samsung phone, and it's been around for over a year (S6 Edge T-Mobile)...
Click to expand...
Click to collapse
If nothing else is working, you can try this for the T-Mobile S6 Edge. ONLY the T-Mobile S6 Edge is supported, so PLEASE verify it's the correct one.
https://mega.nz/#!H0hz2AQJ!iDzw_SwCL7qpJnZ8Y_8EDSrSgvAHK_hT93igXHOlm3A
It's a known working version of Odin, the Samsung Driver Package, and Firmware. Place your phone into Download Mode before using.
If any issues, let me know and we'll work through them.

SuperSport said:
If nothing else is working, you can try this for the T-Mobile S6 Edge. ONLY the T-Mobile S6 Edge is supported, so PLEASE verify it's the correct one.
It's a known working version of Odin, the Samsung Driver Package, and Firmware. Place your phone into Download Mode before using.
If any issues, let me know and we'll work through them.
Click to expand...
Click to collapse
No worries, I got it working! Thank you!
SOLUTION FOR ANYONE HAVING ISSUES STILL
1. Make sure you have Samsung Smart Switch Downloaded
2. Make sure Smart Switch is updated.
3. Click "more" across the top
4. Click "Emergency software recovery and initialization"
5. Click "Device initialization" across the top
6. In the model name box, type in exactly your model number. It is case sensitive. (for me, it was located on the back of my phone on the bottom named "SM-G925T)
7. It will then ask you for your serial number which can be found by holding POWER, HOME, and VOLUME DOWN
8. PROFIT$$$$$$$

Will this wipe the data like recorded audio and video files? This phone belongs to a friend with cancer and I'm trying to unload message he recorded for his family. I need to recover the data first and foremost and then getting the phone operation is secondary. I've got conflicting reports of what a firmware flash will do to recorded media files. I'm hoping the SDcard area will be unaffected but I need to know beyond a shadow of a doubt before I do anything.

Yes it will, it will behave like a factory reset. It will ask you to backup your storage content if it recognizes your phone you may be able to fix it.
Pp.

samanbabah said:
Do the following: open Kies, click on tools, Firmware upgrade and initialisation, enter your model number and serial number and let it download the firmware, after an hour or so depending on your connection speed the firmware will be downloaded and your phone will reboot into recovery to install the firmware. done
Click to expand...
Click to collapse
Thank you so f much!! I avoided waiting 8+ hours to download just the firmware. This method took less than half an hour!
*I dont know if doing something against the rules for replying to this really old thread but I am just thankful for this easy, simple method; I miss using the spen

How to ROOT GT-P220

Hello!
Could you help me with rooting this device, Samsung Galaxy Tab 3 (GT-P220).
I've searched through the site and cannot find any information. I tried using odin with others files, but after reboot, i'm getting original boot once again. (trying twrp)

I've solved my problem. I used TWRP reflashed it (after 5 attempt, HINT was don't tick auto reboot in odin or you will get the same old recovery) . However it's tooks me so more time to find correct version. I also tried root through PC or insde tale with programs like KingoRoot and so on, it's useless, will flash from twrp. However there are so less firmwares for galaxy S3.

Bricked Note 8 AT&T SGH-I467

I've searched, I've tried but to no avail have I been able to fix my poor note 8..and I'm hoping someone can help!
I HAD a stock 4.4.2 Note 8 (AT&T version I-467) running, and I went with the Kingroot method to root. The device rooted but ran like a dog, and in my infinite wisdom did a wipe/reset to see if that would help.
Now here is where I stand:
1) The device boots to a screen saying unauthorized firmware
2) I can get to download mode (power+vol. down+Home)
3) I can NOT get to the screen with (power+col. up+Home)
I have tried Kies, and it won't take the serial number/model number, and Odin can only seem to flash the boot loaders. I have tried 4 different ROM's from samsung (with different international codes), and none of them are able to update the system (they all fail at about 90%). I've tried the all in one toolkit, and since I can't enable USB debugging at this point, it never recognizes the device as attached.
I've tried manually flashing with Odin TWRP, Phils, and stock recovery,(in the hopes of getting one to take so I could load a new ROM from SD card) and they all fail as well.
When I split any of the system images I can load a boot loader file from them, and it succeeds, but everything else fails.
Can anyone point me in the right direction, or am I completely hosed?

Sparkinman said:
I've searched, I've tried but to no avail have I been able to fix my poor note 8..and I'm hoping someone can help!
I HAD a stock 4.4.2 Note 8 (AT&T version I-467) running, and I went with the Kingroot method to root. The device rooted but ran like a dog, and in my infinite wisdom did a wipe/reset to see if that would help.
Now here is where I stand:
1) The device boots to a screen saying unauthorized firmware
2) I can get to download mode (power+vol. down+Home)
3) I can NOT get to the screen with (power+col. up+Home)
I have tried Kies, and it won't take the serial number/model number, and Odin can only seem to flash the boot loaders. I have tried 4 different ROM's from samsung (with different international codes), and none of them are able to update the system (they all fail at about 90%). I've tried the all in one toolkit, and since I can't enable USB debugging at this point, it never recognizes the device as attached.
I've tried manually flashing with Odin TWRP, Phils, and stock recovery,(in the hopes of getting one to take so I could load a new ROM from SD card) and they all fail as well.
When I split any of the system images I can load a boot loader file from them, and it succeeds, but everything else fails.
Can anyone point me in the right direction, or am I completely hosed?
Click to expand...
Click to collapse
+1 on that, I'm stuck in an exact same situation. No help from Samsung either. After rooting with Kingroot my tab started acting like crazy with flickering screen and random reboots, did exactly like you did.
There are many with similar issue and as per my research most of them have given up. Getting a system image dump from a rooted tab running 4.4.2 might be the only way out. Unless of course Samsung/AT&T decides to release full odin flashable image.

I was in a similar situation from trying to fix a eff problem and took my sgh-i467 to a Samsung Experience Center located in many Best Buys and they fixed it free of charge. They were not able to fix my issue with a corrupted EFF file that is keeping my 4G from working though as I had hoped. If you have a Best Buy around with the Samsung Kiosk in it I would give it a try. I ended up trying a few different ones to fix the eff issue and some of the employees at the Samsung centers were about as smart as a head of cabbage (they laughed at me when I said my Note 8 was the issue and said "you can't have a Note 8 the Note 5 just came out") but some were at least helpful and listened when I told them they have the tools to fix my tab (reflash it back to life) and they did. Hopefully they can help you.

man Im in the same exact situation.. And I cant seem to find any help anywhere. I cant locate a stock 4.4.2 kit kat odin flashable file anywhere for the n5120

Sparkinman said:
I've searched, I've tried but to no avail have I been able to fix my poor note 8..and I'm hoping someone can help!
I HAD a stock 4.4.2 Note 8 (AT&T version I-467) running, and I went with the Kingroot method to root. The device rooted but ran like a dog, and in my infinite wisdom did a wipe/reset to see if that would help.
Now here is where I stand:
1) The device boots to a screen saying unauthorized firmware
2) I can get to download mode (power+vol. down+Home)
3) I can NOT get to the screen with (power+col. up+Home)
I have tried Kies, and it won't take the serial number/model number, and Odin can only seem to flash the boot loaders. I have tried 4 different ROM's from samsung (with different international codes), and none of them are able to update the system (they all fail at about 90%). I've tried the all in one toolkit, and since I can't enable USB debugging at this point, it never recognizes the device as attached.
I've tried manually flashing with Odin TWRP, Phils, and stock recovery,(in the hopes of getting one to take so I could load a new ROM from SD card) and they all fail as well.
When I split any of the system images I can load a boot loader file from them, and it succeeds, but everything else fails.
Can anyone point me in the right direction, or am I completely hosed?
Click to expand...
Click to collapse
please help me i need de 4 files repair from this tablet

Try the forum thread started by djjiz, https://forum.xda-developers.com/galaxy-note-8-0/help/i467-4-4-2-t3537302... He posted the files and yes I was able to bring back my previously bricked AT&T Note 8.

Tab SM-210 won't boot anymore, even after installing stock firmwares

Hi,
I recently got a SM-T210 from a friend to repair. The description given was that their kids factory reset the unit and won't boot anymore. First the tablet had the death sleep issue which is a easy fix. But after that the tablet simply continues to show the "Samsung GALAXY TAB3" boot screen and never finishes booting.
As I'm known with Odin I simply downloaded the original firmware from sammobile for this tablet and took the firmware version for the Netherlands as that's where I live. There are 2 4.4.2 versions available and downloaded them both. When using Odin 3.09 and higher I simply cannot install the firmware, but on Odin 3.07 it can. Although it installs the tablet still fails to boot properly and hangs at the tab logo as described earlier.
With Odin 3.09 or higher I'm not even able to install the firmware as it says that there is no PIT file and NAND flash write fails. I've found 2 PIT files for this tablet on the forums and even with the use of these PIT files it still errors with the same issue and installation seems impossible with these versions of Odin.
I've also tried installing TWRP recovery but that won't boot either. When booting the tablet with volume key up it shows the Andriod icon with the spinnng "intestines" and alot of red error messages show not able to find /system and /data. My guess is that this is pretty bad, but that is what I want to fix with the stock firmwares and/or the PIT files (LT02.pit and T210(R).pit).
I'm currently out of ideas to revive this tablet and almost start thinking that it's completely dead, but before throwing it in the garbage bin I'm wondering if anybody here is able to help me further with this issue.
If you think you miss critical information, let me know so I can supply it!
Any help is greatly appreciated and thanked for!

langerak said:
Hi,
I recently got a SM-T210 from a friend to repair. The description given was that their kids factory reset the unit and won't boot anymore. First the tablet had the death sleep issue which is a easy fix. But after that the tablet simply continues to show the "Samsung GALAXY TAB3" boot screen and never finishes booting.
As I'm known with Odin I simply downloaded the original firmware from sammobile for this tablet and took the firmware version for the Netherlands as that's where I live. There are 2 4.4.2 versions available and downloaded them both. When using Odin 3.09 and higher I simply cannot install the firmware, but on Odin 3.07 it can. Although it installs the tablet still fails to boot properly and hangs at the tab logo as described earlier.
With Odin 3.09 or higher I'm not even able to install the firmware as it says that there is no PIT file and NAND flash write fails. I've found 2 PIT files for this tablet on the forums and even with the use of these PIT files it still errors with the same issue and installation seems impossible with these versions of Odin.
I've also tried installing TWRP recovery but that won't boot either. When booting the tablet with volume key up it shows the Andriod icon with the spinnng "intestines" and alot of red error messages show not able to find /system and /data. My guess is that this is pretty bad, but that is what I want to fix with the stock firmwares and/or the PIT files (LT02.pit and T210(R).pit).
I'm currently out of ideas to revive this tablet and almost start thinking that it's completely dead, but before throwing it in the garbage bin I'm wondering if anybody here is able to help me further with this issue.
If you think you miss critical information, let me know so I can supply it!
Any help is greatly appreciated and thanked for!
Click to expand...
Click to collapse
Nothing to loose so i should give it one more try with Kies. I remember that years ago i had a problem with a samsung phone and even Odin wasn't helping me. I did it with Kies then which fixed it. No garantuees though.

Droidphilev said:
Nothing to loose so i should give it one more try with Kies. I remember that years ago i had a problem with a samsung phone and even Odin wasn't helping me. I did it with Kies then which fixed it. No garantuees though.
Click to expand...
Click to collapse
Thanks, I've tried it with Kies but it won't even recognize the tablet. When I put it in Download mode and connect it to my computer the Kies welcome screen keeps switching every 2 seconds to the connecting screen, back to the welcome screen and keeps on going like that.
Any ideas left?

langerak said:
Thanks, I've tried it with Kies but it won't even recognize the tablet. When I put it in Download mode and connect it to my computer the Kies welcome screen keeps switching every 2 seconds to the connecting screen, back to the welcome screen and keeps on going like that.
Any ideas left?
Click to expand...
Click to collapse
Except for correct drivers etc etc not really, no.

I am facing same problem.
My Tab 3 (Sm-T210) has gone too.
Now I can't restore it.
I have downloaded Stock ROM from sammobile.org,
but I can't extract this properly.
It always says that "files are corrupted".
I am also going to be hopeless as like as you.

[Samsung] Galaxy Tab 3 SM-T210 / "Firmware upgrade encountered an issue"

Hello!
Few days ago i found my Samsung Tab 3, and decided to charge it and biit it up.
It got stuck on Samsung logo when i booted it.
So i did a factory reset using the recovery mode.
After i did that the device booted up. with lots of errors.
I was on the setup screen for my device and these errors appeard and said like core has stopped working and every like preinstalled app on my samsung device aswell (NAME has stopped working). So i was not able to fullfill the setup of my device.
I read about it online and a firmware upgrade could fix the problem ( Like the easiest way i read )
So i did some googling and downloaded Odin and a firmware. Followed a guide and did everything right. BUT the process faild like 8min into the flash.
And now my device is stuck on "download mode" but with the error "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I cant get the phone to turn off, nor get into recovery mode or anything else. I tried flash again but no luck.
I also tried another firmware i found. still same problem.
How do i fix this and how can i use my samsung tab 3 again.
WHen i bought it years ago i never really used it. So it's in "new shape" and has never really been used. And now i wanna give it to my little sister for some kids games to play at Xmas.
I hope we can solve this problem.
Thanks in advance
Regards
Timmie

Hyldran0 said:
Hello!
Few days ago i found my Samsung Tab 3, and decided to charge it and biit it up.
It got stuck on Samsung logo when i booted it.
So i did a factory reset using the recovery mode.
After i did that the device booted up. with lots of errors.
I was on the setup screen for my device and these errors appeard and said like core has stopped working and every like preinstalled app on my samsung device aswell (NAME has stopped working). So i was not able to fullfill the setup of my device.
I read about it online and a firmware upgrade could fix the problem ( Like the easiest way i read )
So i did some googling and downloaded Odin and a firmware. Followed a guide and did everything right. BUT the process faild like 8min into the flash.
And now my device is stuck on "download mode" but with the error "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I cant get the phone to turn off, nor get into recovery mode or anything else. I tried flash again but no luck.
I also tried another firmware i found. still same problem.
How do i fix this and how can i use my samsung tab 3 again.
WHen i bought it years ago i never really used it. So it's in "new shape" and has never really been used. And now i wanna give it to my little sister for some kids games to play at Xmas.
I hope we can solve this problem.
Thanks in advance
Regards
Timmie
Click to expand...
Click to collapse
That depends on various things, such as the Android version, kernel and change ID. Than also the Odin version you've used and/or the settings during the attempt of flashing. I found that using the wrong Odin version on a particular Android version, that may prevent the flash of being successfull. B.t.w, did you format both user and cache partition while trying to reset to factory default?

xdausernl said:
That depends on various things, such as the Android version, kernel and change ID. Than also the Odin version you've used and/or the settings during the attempt of flashing. I found that using the wrong Odin version on a particular Android version, that may prevent the flash of being successfull. B.t.w, did you format both user and cache partition while trying to reset to factory default?
Click to expand...
Click to collapse
Yeah, I've found out what Odin version to use that worked for others. I've downloaded lots of different firmwares and such and tried. ALL fails.
When i did a factory reset i also cleared cash and user.
Now i cant even turn off the damn thing. If i charge it up and start, it just goes directly to the screen where it says "Firmware upgrade encountered an issue" and if i try to turn it off, it just reboots and goes back. And i cant even return to factory reset page.
I think that my Micro-USB cable might not work for this, or is that a thing? Do i need a good cable from PC to Phone for this? Or does any cable work?
I just want this tab to work. been trying for weeks.
Thanks for your reply. I hope we can sort this out.

Hyldran0 said:
Yeah, I've found out what Odin version to use that worked for others. I've downloaded lots of different firmwares and such and tried. ALL fails.
When i did a factory reset i also cleared cash and user.
Now i cant even turn off the damn thing. If i charge it up and start, it just goes directly to the screen where it says "Firmware upgrade encountered an issue" and if i try to turn it off, it just reboots and goes back. And i cant even return to factory reset page.
I think that my Micro-USB cable might not work for this, or is that a thing? Do i need a good cable from PC to Phone for this? Or does any cable work?
I just want this tab to work. been trying for weeks.
Thanks for your reply. I hope we can sort this out.
Click to expand...
Click to collapse
It is quite easy to turn the device off, for that to happen you have to press and hold the on/off button. You'll see that the device will shutdown and try to reboot and then finally shuts down again and stay off, then release the on/off button.
Are you sure trying to flash the correct firmware with correct changes, etc??
Please share with us the device and Android version, as well as the stock ROM version with changes you're trying to flash.
Put (copy and paste) the output of Odin below.
Another way to get the firmware flashed is by using Heimdall, but for that to happen you first need to rename the extension of the stock ROM (remove .md5 and leave .tar) and than extract all seperate pieces that are contained within the stock ROM.
All those extracted pieces from the stock ROM you have to upload seperately onto Heimdall and try to flash them to your tablet, one by one.
Heimdall you'll find 'here' or use FWUL instead which has Heimdall pre installed, download is to be found 'here' and install it on a USB medium a stick, to put FWUL onto USB, use Balena-Etcher and the download is to be found 'here'.
Micro USB cable does work, but if you're unsure, try another one and make sure using the correct drivers too.
Using Odin, make sure the tablet is recognised and 'connected' in Odin, also make sure 'repartitioning' is unchecked.
If you've used the wrong Odin version, flashing will fail!

You have Discord by any chance?
If so, please add me @Hyldran0#8832
Thank you for you time man!

Hyldran0 said:
You have Discord by any chance?
If so, please add me @Hyldran0#8832
Thank you for you time man!
Click to expand...
Click to collapse
You're welcome.

Hi, complete novice here, does anyone know where I can get a working Firmware for my Tab 3 v7 (SM-210)?
I have searched through various forum articles here, and tried to install with several builds but none will install. The only one that gets anywhere near is the JASBR build by gr8nole. It appears to install, but on restart, the TAB just sits on the "Samsung Tab3" start screen.
I read that I may need to flash the firmware 4.4.4 (Kit Kat), but can't find it!
The unit is not totally bricked (yet), as I can run TWRP 2.8, with which I created a backup of the original build, but when I try to restore the backup, it fails at just over 31%.
Can anyone help please?