Hi all,
I made a stupid mistake: I erase all files from my kindle.
So now, it's stuck on kindle fire logo.
I try KFU, KF Unbrick, try to install Firekit on Ubuntu without success.
I have a factory cable but don't know if/how it works. And I read a lot of posts on this forum but nothing works!
Help!! I need somebody...
Thanks...
Do you have CWM or TWRP installed?
Sent from my SM-T210R using Tapatalk
How is it listed in device manager?
Sent from my XT894 using Tapatalk
@sd_shadow & @jlshady00
Device is listed as offline and twrp seems not installed. Only have KF logo...
KF was rooted. I didn't use it for months. Maybe the Amazon update unroot the device?
Is There a solution??
Thanks for your precious help!
not KFU. device manager:start>Control panel>hardware>device manager
sd_shadow said:
not KFU. device manager:start>Control panel>hardware>device manager
Click to expand...
Click to collapse
@sd_shadow
Before my mistake, device was ok in device manager. Now, I tried to uninstall and reinstall the same drivers but device manager shows there is a problem with my KF (KF appears but is not recognised: drivers not found).
I'll make a screen capture tomorrow....
Thx and have a nice week end!
@sd_shadow
Can't post outside links... s24.postimg.org-b5s2i05bl-Kindle.png (change - with /)
And I follow your collection of links (driver on android file host).... no change...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
that is from devices and sound?
device manager looks like this
---------- Post added at 10:59 PM ---------- Previous post was at 10:56 PM ----------
may need to delete old drivers and reboot pc a couple of times, till correct divers work.
@sd_shadow
Don't work... can't install drivers with KFU (error message: The current language is not supported by the Device Driver Installation Wizard. Contact the vendor that provided you this package.).
So I install official Amazon Driver... try to install, uninstall but nothing works
what version of windows 7, 8...
sd_shadow said:
what version of windows 7, 8...
Click to expand...
Click to collapse
@sd_shadow Windows7
JohnBeu said:
@sd_shadow Windows7
Click to expand...
Click to collapse
could try my driver folder here
unzip Kindle Fire.win7.Drivers.zip and copy to C:\Program Files\Common Files\Kindle Fire
then
Start>control panel>Hardware>device manager>
select Kindle> properties>uninstall driver
disconnect usb from kindle, reconnect kindle
select kindle again in device manager, update driver, browse my computer for driver software> select driver folder you downloaded and click next
Don't work... think I'm good to buy a new one...
Related
Yesterday at work while my phone is charging it just suddenly went to google screen and i waited for about 5-10 mins and still there, i thought its a minor problem...take out the battery and still stuck up, i went to recovery and accident wipe everything. My main problem is i have a Samsung Laptop and it wont recognize my phone, ( it will recognize for a second when i turn on my phone going to google logo and it will say device is malfunction etc etc. it will also recognize for a second going to recovery mode when pass the google logo and again it will say malfuction ) I tried ADB, but wont recognize my device because of the computer? I tried ODIN but still my device wont recognize by my computer. I tried Gnex tool kit, Rootkit and heres my device manager looks like
I hope someone can help me.
That looks like a problem with the drivers you have installed on your computer. It should show up under Android Phone and then have Android ADB Interface (or Samsung Android ADB Interface). Try installing the drivers from here.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
mwalt2 said:
That looks like a problem with the drivers you have installed on your computer. It should show up under Android Phone and then have Android ADB Interface (or Samsung Android ADB Interface). Try installing the drivers from here.
Click to expand...
Click to collapse
I download it and how can i use this one?
benjiebench said:
I download it and how can i use this one?
Click to expand...
Click to collapse
Install samsung kies.you just need driver from kies. Dont open samsung kies when you want to use adb.
Sent from my GT-I9300 using xda premium
Samsung kies on a Galaxy Nexus ??? Put the phone in adb mode and manually install the ADB interface drivers from the google SDK. You will need to uninstall and erase all previous drivers from the device manager and then install the .inf from the sdk
Sent from my Nexus 4 using xda app-developers app
As of now, I'm trying to unbrick my kindle fire 1st generation, but my computer isn't recognizing it as ADB, only as Android, is there anyway to get it recognized as ADB so I can install twrp and flash a rom?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
carlybelle said:
As of now, I'm trying to unbrick my kindle fire 1st generation, but my computer isn't recognizing it as ADB, only as Android, is there anyway to get it recognized as ADB so I can install twrp and flash a rom?
Click to expand...
Click to collapse
Try updating the driver in driver settings. That was the problem with my PC once. I just updated and ADB was recognized
Sent from my Amazon Kindle Fire using xda app-developers app
404-Not Found said:
Try updating the driver in driver settings. That was the problem with my PC once. I just updated and ADB was recognized
Sent from my Amazon Kindle Fire using xda app-developers app
Click to expand...
Click to collapse
Nope, but thank you anyway, the problem is that my kindle fire has no os and it's just stuck at the stock boot up screen without any recovery...
You need a Fastboot cable/adapter/etc.
You can make one yourself by soldering 4th contact/the one with the missing spot to the 1st contact (red wire/power wire).
And then you can use whatever to recover.
AND make sure you use Kindle Fire FIRST GENERATION SOFTWARE. OTHERWISE YOU WILL BRICK AGAIN, AND THEN, COMES JTAG.
mr_verystock said:
You need a Fastboot cable/adapter/etc.
You can make one yourself by soldering 4th contact/the one with the missing spot to the 1st contact (red wire/power wire).
And then you can use whatever to recover.
AND make sure you use Kindle Fire FIRST GENERATION SOFTWARE. OTHERWISE YOU WILL BRICK AGAIN, AND THEN, COMES JTAG.
Click to expand...
Click to collapse
Okay thank you!
HELLO.
sorry for my bad English.
I wrote a Google translation.
I have a very big problem.
my P8000 is not working. BOOTLOP
only works CWM recovery.
i cant flash with flash sp tool. downloading not starting.
I install the drivers for MTK
I can not install the rom with recovery ....- bootlop ...
I no longer know what to do.
I have an idea.
I did not do a backup of my stock rom.
Please let someone shares buckup your rom then might be able to save my P8000 with recovery.
Somebody please help.
You have to re-flash ROM.
Stock ROM you can only flash from SP Flash Tools
If SP Flash Tools do not work you probably dont have drivers correctly installed on your PC, so before you can do anything you got to make that work....
sharkware said:
You have to re-flash ROM.
Stock ROM you can only flash from SP Flash Tools
If SP Flash Tools do not work you probably dont have drivers correctly installed on your PC, so before you can do anything you got to make that work....
Click to expand...
Click to collapse
ok
in device Manager when i connect powered off phone is written
"mediatek preloader usb vcom port"
it means the drivers are installed????
I have a windows xp
Please can someone give me a backup of elephone p8000 ROM.
I will send the backup to SD card and try to restore
blaca87 said:
Please can someone give me a backup of elephone p8000 ROM.
I will send the backup to SD card and try to restore
Click to expand...
Click to collapse
You cannot restore someone elses backup!!
If you want to restore anything from RECOVERY MODE then download Eragon ROM.
---------- Post added at 12:42 PM ---------- Previous post was at 12:30 PM ----------
blaca87 said:
ok
in device Manager when i connect powered off phone is written
"mediatek preloader usb vcom port"
it means the drivers are installed????
I have a windows xp
Click to expand...
Click to collapse
This is how my Device Manager looks:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
See, i still have yellow exclamation marks (unsigned drivers?), but it works for me.
Did you connect it via USB when the phone is powered OFF? It's those drivers that
are important (Preloader USB VCOM)
I suppose you know that phone has to be powered OFF when you connect it for
flashing with SP Flash Tool?
Windows XP MIGHT be diffifult to get drivers working with though...
Time to upgrade
hi can you share your SP driver and short flash tutorial how to flash new stock rom 09092015?. I try to flash my P8000 but i do not have DA USB COM in my device manager. What am i doing wrong?
UPDATE:
just install drivers on old good xp and everything works fine, flash rom too.
If you would tell me which hidden drivers are shown under ports, I could tell if you installed it correctly.
hhhjjjhb
hhhhhhhhhh
rrtrrrtttt
ffffffffffff
iuugfdt
55tggbhji
yyyggggggghh
weddffgghhjko
I have wiped the phone since I want to flash custom rom.
I am using TWRP recovery but I cannot mount the MicroSD or OTG so that my phone is bricked.
When I go to the fastboot mode or adb sideload mode, the pc cannot recongnize my phone . It says Unknown USB Device (Device descriptor request failed)
Could anyone help ?
Try re-installing drivers. You can find it on Asus's website. If you are using Windows 8/8.1/10, for sure, install driver in "Disable Driver Signature Enforcement Mode". After that you can reflash your phone by any method you want
The pc can load the driver correctly for a few minute and it failed after a few minute
And I also cannot update when it is stuck
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
HungNgocPhat said:
Try re-installing drivers. You can find it on Asus's website. If you are using Windows 8/8.1/10, for sure, install driver in "Disable Driver Signature Enforcement Mode". After that you can reflash your phone by any method you want
Click to expand...
Click to collapse
tommyvca said:
The pc can load the driver correctly for a few minute and it failed after a few minute
And I also cannot update when it is stuck
Click to expand...
Click to collapse
You mean it recognize your device as an adb/fastboot device and in minutes it doesn't recognize anymore? But remember to use Asus's driver, not other ones (link)
Yes. I use asus driver
HungNgocPhat said:
You mean it recognize your device as an adb/fastboot device and in minutes it doesn't recognize anymore? But remember to use Asus's driver, not other ones (link)
Click to expand...
Click to collapse
tommyvca said:
Yes. I use asus driver
Click to expand...
Click to collapse
Weird... Never saw that before. Try on another PC or reinstall Windows to see if it works
Actually is sometimes work somtimes not work. But I cant make it work again in this moment.
It is not my pc problem. I tried on another pc.
HungNgocPhat said:
Weird... Never saw that before. Try on another PC or reinstall Windows to see if it works
Click to expand...
Click to collapse
tommyvca said:
Actually is sometimes work somtimes not work. But I cant make it work again in this moment.
It is not my pc problem. I tried on another pc.
Click to expand...
Click to collapse
Hi, I'm having the same problem with my Asus Zenfone Max Pro M1 (ZB601KL) and I've been stuck for many days. Could you please tell if your issue was resolved? If yes, then how?
Your support would be much appreciated ?
Hello my dear Friends
I am struggling with unlocking my phone.
Phone-Model: M1908C3JGG
First, what I have done:
Allow the bootloader to be unlocked (in dev. options)
Set the USB debuggin to ON (in dev. options)
Downloaded the Adb-Tool & drivers and install it and set the variables.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
When I start the Phone in Fastboot-Modus, my PC don't recognize the device.
What I have be done wrong?
Sorry for my newbienes XD
You need to manually update the driver in device manager, try the below one. If it says installation failed due to unsigned drivers, then disable signature verification in your PC and try install again
hmd_msrf_k said:
You need to manually update the driver in device manager, try the below one. If it says installation failed due to unsigned drivers, then disable signature verification in your PC and try install again
Click to expand...
Click to collapse
It still don't work.
Right click on Android Bootloader Interface
Then connect your phone to the computer
Click on update driver
Select Browse my computer for drivers.
Then select Let me pick from a list of available drivers on my computer
Click Next and let it complete
If you still face any issue download updated adb and fastboot drivers
ADB and FASTBOOT DRIVERS
I get this error message:
It means This device cannot start. (Code 10)
Updated also not help.
Is this always so difficult on Windows?
hans12312!! said:
I get this error message:
View attachment 5465485
It means This device cannot start. (Code 10)
Updated also not help.
Is this always so difficult on Windows?
Click to expand...
Click to collapse
No it is not. Uninstall the Android Bootloader drivers and restart your computer. Restart using restart button
Then connect your phone and see if it solves your problem.
mvikrant97 said:
No it is not
Click to expand...
Click to collapse
Your words make my a little more optimistic
hans12312!! said:
Your words make my a little more optimistic
Click to expand...
Click to collapse
Try this one, i'm used this in in my Windows 8 and it worked perfectly, it should work in Windows 10 too.
thanks to mvikrant97 I can now unlock my phone.
My Rzyen 5 3600 CUP had some issues with the driver. We used the "AMD Ryzen USB controller fix.zip".
A known Error https://forum.xda-developers.com/t/fix-fastboot-issues-on-ryzen-based-pcs.4186321/