Develop Bugs

[Q] Flashed TW-based theme, can't get home button or status bar back!

OK, I might get trolled unrelentlessly, but right now I don't care...
The girlfriend loved the look of some of these themes, and asked me to install one. I didn't realize at the time that not being on a TW-based ROM that it would fail as badly as it has.
At this point in time, I can get into the OS, see her home screen. Google acct info is completely gone, home button does not work, and no matter what order of operations I use in terms of bringing this thing back to life will work. HELP.
TB will fail to restore ACTUAL settings for "Account", etc. If/when it does finish, the phone boots straight to boot-animation, but does not go any further, period.
I've been at this for 2hrs now, and I'm getting nowhere. Do I need to install a TW-based ROM, THEN wipe again and install AOSP like she had before?
For clarification, I've tried wiping EVERYTHING, including full reset in CWM.
The problem is that I get a FC on "False.4.1.2-eng-nocoast.20121030.123453", and the status-bar is completely gone. I can use TB to remove the "False" apk, but I can't find a way to get the status bar back. I've tried installing the ROM fresh after full wipe of all caches, plus factory-wipe from within CWM. All this amounts to is the ROM booting to its splash-screen without continuing, OR getting to Android, but the home button doesn't work, and there is no way to associate a Google account with it at that point in time. I thought I could remedy this by simply having TB update.zip run before first boot after fresh install, but even though it allows the Play store and other Google apks to install, it won't let me associate an account for Google. The list consists of Exchange and something else.
Basically - I need to know if this means I have to Odin back, start over...or if there is some way to get the phone to recognize the 2 missing components without doing that.
I do have one nandroid, but it was done right after the initial realization of failure with the theme install, so it essentially puts me back to square-one.

You need to be on a tw rom; as that theme is tied into the tw framework.
What you should do is:
-do a full wipe in recovery
-download / flash your tw rom of choice
-flash the theme
In the future, tw / aosp themes are meant to be used on the respective rom source.

teh roxxorz said:
You need to be on a tw rom; as that theme is tied into the tw framework.
What you should do is:
-do a full wipe in recovery
-download / flash your tw rom of choice
-flash the theme
In the future, tw / aosp themes are meant to be used on the respective rom source.
Click to expand...
Click to collapse
Would this enable me to then flash back to an AOSP ROM?

disturbd1 said:
Would this enable me to then flash back to an AOSP ROM?
Click to expand...
Click to collapse
After you do the full wipe in recovery, you could flash any rom, tw or aosp that you wanted; so yessir.

teh roxxorz said:
After you do the full wipe in recovery, you could flash any rom, tw or aosp that you wanted; so yessir.
Click to expand...
Click to collapse
As I mentioned, I've tried doing a full wipe in recovery, and flashing the ROM she had before, to no avail

disturbd1 said:
As I mentioned, I've tried doing a full wipe in recovery, and flashing the ROM she had before, to no avail
Click to expand...
Click to collapse
What recovery are you using? If you flash twrp and wipe the system, along with the caches and factory, that will definitely be the end of that.
And you flashed the same rom with the theme?

teh roxxorz said:
What recovery are you using? If you flash twrp and wipe the system, along with the caches and factory, that will definitely be the end of that.
And you flashed the same rom with the theme?
Click to expand...
Click to collapse
Using CWM 6, touch version. Yeah, wiped everything, and flashed same ROM. Did not flash that theme again.

disturbd1 said:
Using CWM 6, touch version. Yeah, wiped everything, and flashed same ROM. Did not flash that theme again.
Click to expand...
Click to collapse
If you're able to get into the os, I would install the goo manager app > menu > install open script recovery > install twrp recovery. Then boot into recovery, make sure to wipe the system. That should do it, cuz just seems something isn't wiping. Additionally, I may re-down that rom if its giving you issues; did you modify the zip at all?

teh roxxorz said:
If you're able to get into the os, I would install the goo manager app > menu > install open script recovery > install twrp recovery. Then boot into recovery, make sure to wipe the system. That should do it, cuz just seems something isn't wiping. Additionally, I may re-down that rom if its giving you issues; did you modify the zip at all?
Click to expand...
Click to collapse
I'll give that a try. I didn't modify the ROM; I never do, I just install them. It's the Liquid Smooth AOSP, and it has been just that up until I had my "senior moment" last night.

disturbd1 said:
I'll give that a try. I didn't modify the ROM; I never do, I just install them. It's the Liquid Smooth AOSP, and it has been just that up until I had my "senior moment" last night.
Click to expand...
Click to collapse
Ha, well they'll creep up on all of us at some point. Though install the twrp recovery, make sure to wipe both caches, factory reset, and system > install the rom, no theme, and you should be good to go, bro.

teh roxxorz said:
Ha, well they'll creep up on all of us at some point. Though install the twrp recovery, make sure to wipe both caches, factory reset, and system > install the rom, no theme, and you should be good to go, bro.
Click to expand...
Click to collapse
So, I got TWRP 2.3 on, wiped everything, flashed the ROM, Gapps, and ran Fix Permissions (which resulted with "failed"), and rebooted. Same story - goes into Android, home button doesn't work, and no Google account associated with the phone. Also, no menu option to add one. There is only "Corporate" and "Email".

disturbd1 said:
So, I got TWRP 2.3 on, wiped everything, flashed the ROM, Gapps, and ran Fix Permissions (which resulted with "failed"), and rebooted. Same story - goes into Android, home button doesn't work, and no Google account associated with the phone. Also, no menu option to add one. There is only "Corporate" and "Email".
Click to expand...
Click to collapse
When you boot into the os, you have supersu and allows the usage of root apps?

teh roxxorz said:
When you boot into the os, you have supersu and allows the usage of root apps?
Click to expand...
Click to collapse
This particular ROM uses a different SU app that I hadn't seen before using it, but I have the same phone with the same ROM, and it runs as the title says, "Liquid Smooth". So it's not an issue with the ROM or how it was packed. I'm trying a different ROM now, to see if I have better luck.

disturbd1 said:
This particular ROM uses a different SU app that I hadn't seen before using it, but I have the same phone with the same ROM, and it runs as the title says, "Liquid Smooth". So it's not an issue with the ROM or how it was packed. I'm trying a different ROM now, to see if I have better luck.
Click to expand...
Click to collapse
I was going to suggest trying a different wrong, because the instructions I gave you should have worked, not to say you're doing it wrong. If i remember, that was was ported, so it could have inherent issues, or some unknown ones; I haven't flashed it yet, so I can't advise. Flash aokp, I know everything is working there.

teh roxxorz said:
I was going to suggest trying a different wrong, because the instructions I gave you should have worked, not to say you're doing it wrong. If i remember, that was was ported, so it could have inherent issues, or some unknown ones; I haven't flashed it yet, so I can't advise. Flash aokp, I know everything is working there.
Click to expand...
Click to collapse
OK, here's the latest:
-Wiped everything in TWRP - caches, system, data, basically every option for wiping in the menu.
-Flashed AOSP ROM by codefireX, yet another that I've used before, and has worked almost flawlessly for me.
-Flashed JusTunBean's Aroma installer for gapps, been using it for months with no issues.
-Boots to OS, home button now works, and the status bar is there. Immediately get a FC on Gmail, without opening any apps.
-Still no Google account, and no option within "Accounts" to add one. <----main problem at this point.

disturbd1 said:
OK, here's the latest:
-Wiped everything in TWRP - caches, system, data, basically every option for wiping in the menu.
-Flashed AOSP ROM by codefireX, yet another that I've used before, and has worked almost flawlessly for me.
-Flashed JusTunBean's Aroma installer for gapps, been using it for months with no issues.
-Boots to OS, home button now works, and the status bar is there. Immediately get a FC on Gmail, without opening any apps.
-Still no Google account, and no option within "Accounts" to add one. <----main problem at this point.
Click to expand...
Click to collapse
Nothing in the menu button to add accounts?
And with that aroma installer, are you adding the thing for the account setup, that prompts you for the gmail account etc? I don't use the aroma installer, but I know it lets you select which packages to install, and you may not be installing it.

teh roxxorz said:
Nothing in the menu button to add accounts?
And with that aroma installer, are you adding the thing for the account setup, that prompts you for the gmail account etc? I don't use the aroma installer, but I know it lets you select which packages to install, and you may not be installing it.
Click to expand...
Click to collapse
Nothing at all in the menu for it :/
The gapps installer menu is Aroma-driven, but it has its own menu. It's designed to let you choose which gapps you want installed "inverted", and what, if any, additional features you'd like added. I've tried everything from completely foregoing installing them altogether, to installing all of them. There is no menu option for adding account setup.

Since all else had failed just Odin back to stock and reroot. Then you should be good to go. You also might have something on the internal sd card that is not playing nice. So id wipe that too then use odin. Make sure you get any pics etc saved first so you don't lose them.
G-Nexus Sent

disturbd1 said:
Nothing at all in the menu for it :/
The gapps installer menu is Aroma-driven, but it has its own menu. It's designed to let you choose which gapps you want installed "inverted", and what, if any, additional features you'd like added. I've tried everything from completely foregoing installing them altogether, to installing all of them. There is no menu option for adding account setup.
Click to expand...
Click to collapse
That's really weird. Have you tried installing just the gapps zip without the installer?
---------- Post added at 01:10 PM ---------- Previous post was at 01:09 PM ----------
ifly4vamerica said:
Since all else had failed just Odin back to stock and reroot. Then you should be good to go. You also might have something on the internal sd card that is not playing nice. So id wipe that too then use odin. Make sure you get any pics etc saved first so you don't lose them.
G-Nexus Sent
Click to expand...
Click to collapse
That's the last thing I was gona have him do, but avoiding it if possible.

I figured it out. It had nothing to do with remnants of whatever messed it up in the first place. For the first time since I've used that specific gapps installer - it has failed me. You were right when you said it should be creating a google account prompt as a result of installing the gapps (I always thought that was part of the ROM, not the gapps zip).
I loaded the previous version of the gapps zip, it still uses Aroma, and it worked like a charm.
Thanks a TON for the persistence responses, I sincerely appreciate it. Nothing like looking like an ass to your girl when you think you know your Android...heh
Holy hell, I've lost a lot of sleep, Batman.
Cheers :good:

[OTHER FORUMS] Roms, Apps and Tutorials for the HAM

By far the best forum is 4pda. A big thanks to forum member acbka aka asyan4ik
1. Eloquent
2. Phandroid
3. HTC Mania
4. Droid Sans
5. Android Hilfe
6. Frandroid
7. 4pda.ru MATE
Shendu and also for the P6
MIUI
LEWA OS
News
Unlock Codes

uppon2 said:
By far the best forum is Eloquent. Keep an eye on these 2 users 'fte9k' and 'kangvip' - I did try one of the roms out but it was all Chinese. I kept getting a constant system force close at the startup procedure sent in to bootloop. Be very careful when trying the non english roms! I do not want to hear anybody blaming me for a bricked phone.
1. Eloquent
2. Phandroid
3. HTC Mania
4. Droid Sans
5. Android Hilfe
6. Frandroid
7. MIUI
8. Unlock Codes
9. News
Click to expand...
Click to collapse
You can add a Russian forum 4pda.ru MATE

acbka said:
You can add a Russian forum 4pda.ru MATE
Click to expand...
Click to collapse
Added

I am about to try LEWA OS. I have always wanted to give this a shot but it was never available on any of my devices. I will report back
*EDIT* Look below for details

uppon2 said:
I am about to try LEWA OS. I have always wanted to give this a shot but it was never available on any of my devices. I will report back
*EDIT* I have changed my mind. I have taken a long time to setup my phone to be the way it is now and don't want to risk having to flash stock firmware again in order to fix a soft bricked phone, not that it usually worries me, it's just annoying trying to get everything perfect again (I don't rely on nandroid backups as even they aren't perfect_
Click to expand...
Click to collapse
you are wrong, backup through twrp 2.6.3.3 works perfectly! Before Recover to do
wipe - advanced wipe
-Wipe dalvik cache
-System
-Cache
-Custom Storage
-Date
restore you buckup -
reboot -
i restore stock b907 / pac man rom / my port fly ui (cm 10.1 joe.stone)
:good:

acbka said:
you are wrong, backup through twrp 2.6.3.3 works perfectly! Before Recover to do
wipe - advanced wipe
-Wipe dalvik cache
-System
-Cache
-Custom Storage
-Date
restore you buckup -
reboot -
i restore stock b907 / pac man rom / my port fly ui (cm 10.1 joe.stone)
:good:
Click to expand...
Click to collapse
I have been doing this for many years. I have goten to points of soft bricking where recovery is impossible to get in to and where I needed to enter download/bootloader modes. The only way to restore a nandroid is if I have backed it up to my computer beforehand, flashed a firmware in download/bootloader mode then re-root/unlock and flash a recovery again, transfer the nandroid to my device and hope the data has not been corrupted during the process between phone and computer. I have actually needed to do this several times and more than once the nandroid was not restorable.

MIUI V5
http://rom.miui.com/en/download/view/id/359370#top

I ended up flashing LEWA OS. Very fast and everything seems to be working fine for me. GPS is working better for me now than on stock, camera and HDR mode are great, speed is good. Wifi and Data is working flawlessly. Beautiful lockscreen and UI. All of the theming options seem to be working as well (for those familiar with MIUI etc.) The rom has a lot of visual tweaking and you can even kill the current running app by long pressing the back button *note* it does work, you just need to hold it for longer. You can also swipe in between the notifications and the switches tabs anywhere on the screen
The first time I flashed this it would not pass the boot animation. I ended up flashing B907 again and then running the bootloader unlock again (regardless of if I needed to or not) and then flashed the rom again. Step 1. Copy the LEWA rom zip and Gapps to your phone, then reboot in to recovery. 2. In TWRP; do an advanced wipe "cache, dalv, system, data" and then go to install and find the rom and install it. 3. reboot and make sure the rom loads all the way (do not bother setting up google account yet), once this happens reboot in to recovery again by holding power button and selecting reboot>recovery (inside of the rom this option is available), once you are there please install Gapps with TWRP, then reboot and enjoy.
Screenshots
Lockscreen Screenshots
Video showing off the rom (all of these features work on HAM)

uppon2 said:
I ended up flashing LEWA OS. Very fast and everything seems to be working fine for me, the only issue so far is I can not scroll left or right to select lockscreen shortcuts, I can only slide it down to unlock. Camera and HDR mode are great, speed is good. Wifi and Data is working flawlessly. Beautiful lockscreen and UI. All of the theming options seem to be working as well (for those familiar with MIUI etc.)
The first time I flashed this it would not pass the boot animation. I ended up flashing B907 again and then running the bootloader unlock again (regardless of if I needed to or not) and then flashed LEWA rom by extracted the files to a new folder and then running the Flash_All.bat from inside the folder. After the files have finished all I did was reboot and it worked this time.
Click to expand...
Click to collapse
Hi, You can put some screenshots of the ROM??
thanks.

elroysk said:
http://rom.miui.com/en/download/view/id/359370#top
Click to expand...
Click to collapse
Because of P6?
This ROM is 100% compatible with Mate?

I have not tried.

ErSergi said:
Hi, You can put some screenshots of the ROM??
thanks.
Click to expand...
Click to collapse
Here are some screen shots. (The navigation keys are like that by choice, remember I am using the Australian model so I only have 1gb of ram )

Some of the lockscreen which is actually live (I am using the BigBang theme)

elroysk said:
http://rom.miui.com/en/download/view/id/359370#top
Click to expand...
Click to collapse
hasbrone said:
Because of P6?
This ROM is 100% compatible with Mate?
Click to expand...
Click to collapse
If you look in the first post of my thread, you will see that MIUI is already listed but from a different download area and from a different author. If you scroll down you will actually find the file for Ascend Mate. I will tell you now though, the file name is the same as the P6 so I am assuming it is the same or they have used the P6 file and tweaked it. I am going to look at both files and give it a shot at running them today.
This is the file provided under the Huawei Ascend Mate

uppon2 said:
If you look in the first post of my thread, you will see that MIUI is already listed but from a different download area and from a different author. If you scroll down you will actually find the file for Ascend Mate. I will tell you now though, the file name is the same as the P6 so I am assuming it is the same or they have used the P6 file and tweaked it. I am going to look at both files and give it a shot at running them today.
This is the file provided under the Huawei Ascend Mate
Click to expand...
Click to collapse
I already installed this rom and it looks neat..
before you install make sure u replace the boot.img with ascend mates boot.img file. the one in the zip file is for P6.

Hi uppon2 , Hd video playback youtube in this ROM? works?
You can put the link in the forum, where you downloaded this ROM Lewa Os.
thanks!

I downloaded d zip...how to flash it
Sent from my HUAWEI MT1-U06

ErSergi said:
Hi uppon2 , Hd video playback youtube in this ROM? works?
You can put the link in the forum, where you downloaded this ROM Lewa Os.
thanks!
Click to expand...
Click to collapse
HD Playback is working fine for me with Youtube. You can get the file from the first post or follow my instructions below
shaun100689 said:
I downloaded d zip...how to flash it
Sent from my HUAWEI MT1-U06
Click to expand...
Click to collapse
I have already given instructions on how to flash the file and I will post them again.
The first time I flashed this it would not pass the boot animation. I ended up flashing B907 again and then running the bootloader unlock again (regardless of if I needed to or not) and then flashed LEWA rom by extracting the files to a new folder and then running the Flash_All.bat from inside the folder. After the files have finished all I did was reboot and it worked this time. I then installed Gapps after being certain that the rom would load

So is it necessity to unlock boot loader...?
Sent from my HUAWEI MT1-U06

Uppon2 , https://disk.yandex.com/public/?hash=UG0GbIYB6yTozqYOQtxz5U5g0Bf7ymAIfTr3ZqQyjg8=
I downloaded this ROM and no. bat file in order to install ...
as installed?
this link is correct, because I see this. bat file to install??
I think these instructions are not in this rom?????
The first time I flashed this it would not pass the boot animation. I ended up flashing B907 again and then running the bootloader unlock again (regardless of if I needed to or not) and then flashed LEWA rom by extracting the files to a new folder and then running the Flash_All.bat from inside the folder. After the files have finished all I did was reboot and it worked this time. I then installed Gapps after being certain that the rom would load

How I Installed An Edge ROM and Tricked My Phone Out

I have been asked by several people, on the forums and via PM. I thought that I would offer a step-by-step guide.
Will This Trip Knox? Yes, it will. Installing a custom recovery such as TWRP will definitely trip Knox. From what I have read installing a ROM, even through FlashFire, will trip Knox, as will flashing a kernel.
You Don't Seem To Care About Knox That is correct. To this point the only downside is that I won't be able to use Samsung Pay and I don't plan on that anyway. BUT.....if you do care and Knox matters, stop reading now and stick with stock.
I will also recommend that you grab ODIN and a stock TAR file for your phone. You can always find the latest firmware at SamMobile, but will need to create an account and free downloads are speed capped. It will be SLOOOOW. But you will get a zip with the file that you need inside. Good to have in case of accident. Here is where I got mine: http://www.sammobile.com/firmwares/download/47474/G920PVPU1AOE2_G920PSPT1AOE2_SPR/
That said.....assume that you have a rooted S6. Install TWRP Manager from the Play store, ignore anything it says about an SD card and click on "Install TWRP." The version that you are looking for is "zerofltespr.img." You can also download that from here https://twrp.me/devices/samsunggalaxys6sprint.html and use Flashfire to install. Reboot into recovery (see http://www.androidexplained.com/galaxy-s6-recovery-mode/ for an explanation) and make sure that TWRP is installed. If TWRP doesn't come up, make sure that you used the correct file and try again.) Now you are ready to begin.
1) The ROM that I used is the SAC23 ROM from here: http://forum.xda-developers.com/spr...ment/sac23ram9200srintdeoxedmoddedv1-t3107342 Download that and copy to your phone. You should also grab the "Recent apps fix long press on home" zip file from the bottom of that post.
2) You will also NEED (!!!!!) a kernel that is designed for the S6, otherwise you will bork your phone. I use (and recommend) the Ktoonsez kernel located here: http://forum.xda-developers.com/spr...elopment/kernel-kt-sgs6-ocv-ktweaker-t3093009 Grab that and copy to your phone.
3) For fingerprint recognition and private mode, you will need the Aroma installer from here: http://forum.xda-developers.com/showpost.php?p=60112854&postcount=2 If you use the Aroma installer (and I don't so I have no experience) be sure that those are the only two things that you install.
UPDATE 7/1/2015 Just had a report that fingerprint is working with this kernel: http://forum.xda-developers.com/sprint-galaxy-s6/development/kernel-kernel-t3146127
Anyone interested should read all posts for that kernel before flashing.
Once you have those files on your phone, you are ready to begin.
Return to recovery mode. Before you do anything else....Click on "Backup." Accept the default settings and let it do its thing. I always name my backups....calling this Stock is probably a good idea. Once that is done, if you break things, you can return to this.
Okay, now go to Wipe. The old-timers will disagree, but most of the time the default "Factory Reset" is all that you need. If you are paranoid (and who isn't?) after this you can go to Advanced and choose Dalvik Cache, Cache, Data and System. But I rarely do this anymore. Complete guide for using TWRP is here: http://www.androidtipsandhacks.com/root/twrp-the-complete-guide-to-using-recovery-on-android/
Now go back to the main screen and select Install. You can select multiple zips. Flash the ROM, the kernel and that Recent Apps zip file. Be sure to set the kernel to flash after the ROM. Or you can flash them one at a time.
Once done, reboot phone and if all went well, you will see a new boot animation. First boot will take a while, let her go.
You should have a clean build so remember that you will need to reset Developers options, security (for allow Unknown sources) and other stuff.
With the Ktoonsez kernel, you will have the KTweaker app, very useful. If it doesn't install for you (and it didn't for me) the APK is located inside the zip file that you downloaded at S6\KT-SGS6-LP5.0-TW-G920P-05.28.2015.zip\system\app\ Extract that and install. I use downloaded Profiles a lot.
If all is well, but the fingerprint and private mode settings are things that you use, go back into Recovery and select ONLY those two items. I'll state again, I don't use them, have never flashed the Aroma installer and can't offer any help. I have seen that they work for some people, not for others..../me shrugs. I can't help with that.
I also use the Wicked One Theme from @dazedandconfused who is a master. See http://forum.xda-developers.com/spr...ps/theme-wicked-one-theme-s6-s6-edge-t3129822 for the theme and instructions. Be sure to follow the instructions about having the Urban theme from the Theme Store installed first. But this theme makes me very happy.
That is everything that I know....which goes to show how little I know!
EDIT: Missed a step....DOH!.... if you are using TWRP you should flash the zip file found here to address the Deep Sleep issue: http://forum.xda-developers.com/showpost.php?p=60385577&postcount=56
Happy ROM-ing.

Everything works except I cannot text at all

ScottBroker said:
Everything works except I cannot text at all
Click to expand...
Click to collapse
Are you using the stock messaging app or something else? Did you use the Aroma installer and, if so, was messaging working before?

koop1955 said:
Are you using the stock messaging app or something else? Did you use the Aroma installer and, if so, was messaging working before?
Click to expand...
Click to collapse
I use stock, and I tiried another as well. I did not use the aroma installer
---------- Post added at 08:25 PM ---------- Previous post was at 08:17 PM ----------
ScottBroker said:
I use stock, and I tiried another as well. I did not use the aroma installer
Click to expand...
Click to collapse
I updated the PRL, rebooted and now it works, Thanks

ScottBroker said:
I use stock, and I tiried another as well. I did not use the aroma installer
---------- Post added at 08:25 PM ---------- Previous post was at 08:17 PM ----------
I updated the PRL, rebooted and now it works, Thanks
Click to expand...
Click to collapse
Ah, good to know and thanks for posting the solution here.
Cheers.

koop1955 said:
Ah, good to know and thanks for posting the solution here.
Cheers.
Click to expand...
Click to collapse
Thanks for posting an alternative to the non existant development for the S6.

nice work on this Koop!!!!! I'm running Sacs rom and KToonz kernel smooth and trouble free, privacy mode and finger print scanner work 100%
sent from my S6 using tapatalk

Here's a question. Hope do you use the stock battery icon on Sac's ROM and not one of those gross 3minit or whatever ones? They're all hideous.

twiztid907 said:
Here's a question. Hope do you use the stock battery icon on Sac's ROM and not one of those gross 3minit or whatever ones? They're all hideous.
Click to expand...
Click to collapse
I have to say that it is really popular mod, but not to my taste either. Here is what I run for battery:
GSam Battery Monitor (also lets you customize the battery icon, but I don't)
Greenify and Wakelock Detector
With Ktoonsez, I have the Ktweaker installed. Click on the 3 dots upper left. Scroll down to KTweaker Shop Profiles and then pick from Conservative, Balanced or Performance (or grab some of each.) I am using the Conservative Profile "Dead By April." I love that name!
Average Per Complete Charge (now this is with light usage) 2 days 0 hours, with screen on 1 hour 41 minutes.
Not expecting to get the same battery life when I am traveling or with heavy usage, but that is still pretty remarkable.

koop1955 said:
With Ktoonsez, I have the Ktweaker installed. Click on the 3 dots upper left. Scroll down to KTweaker Shop Profiles and then pick from Conservative, Balanced or Performance (or grab some of each.) I am using the Conservative Profile "Dead By April." I love that name.
Click to expand...
Click to collapse
while I'll admit I haven't explored the KToonz settings much, I was wondering how you accessed profiles, this is good info, I'm trying out dead by April as I type this out lol
sent from my S6 using tapatalk

Missed a step
I edited the original post, but let me add this.
If you are running TWRP, you should flash the zip file found here to address the "No Deep Sleep" issue: http://forum.xda-developers.com/showpost.php?p=60385577&postcount=56

Hello, thank you for this great write-up! I PM'ed you the other day, and you helped me get my phone flashed and all.
However, I am still having issues with the Fingerprint scanner. If any other users do use the Fingerprint scanner, could you explain the steps in which you flashed each file? After using the Aroma installer to fix Fingerprint, I keep getting "Unfortunately, Fingerprint has stopped working." I just can't seem to get it working even with the Aroma installer. Maybe I am flashing files in the wrong order?
Thanks for any advice!

Android Attack said:
Hello, thank you for this great write-up! I PM'ed you the other day, and you helped me get my phone flashed and all.
However, I am still having issues with the Fingerprint scanner. If any other users do use the Fingerprint scanner, could you explain the steps in which you flashed each file? After using the Aroma installer to fix Fingerprint, I keep getting "Unfortunately, Fingerprint has stopped working." I just can't seem to get it working even with the Aroma installer. Maybe I am flashing files in the wrong order?
Thanks for any advice!
Click to expand...
Click to collapse
did you do a factory reset or dirty flash?
sent from my S6 using tapatalk

Another ROM Option
This is also an option for anyone having issues: http://forum.xda-developers.com/spr...ebloated-rom-samsuing-galaxy-s6-edge-t3126661
@Electronical Updates reminds all S6 users to flash the Ktoonsez kernel.
I hope to try this out this weekend.

scott_0 said:
did you do a factory reset or dirty flash?
sent from my S6 using tapatalk
Click to expand...
Click to collapse
I have tried both. I first wiped system, data, cache, dalvik and tried that. Then, I tried dirty flash from stock, flashing the ROM, kernel, and fingerprint fix, then wiped caches, and nothing. :/
Could you start the aroma installer, and on the first slide it tells you the version. Could you tell me which version you have? Maybe we have different versions, that could be the problem.. Thank you!
Edit: I also tried the other debloated ROM you mentioned, but it did not work with nor without the Aroma installer. If anybody wants to work with me to get this working, I can provide logs and information and test out whatever is needed. Thanks!

Thank you for this write up...glad to learn there is dev'ing going on for the edge.
Was hoping you could help; tried flashing twrp via odin, per instructions--root manager shows that I have TWRP 2.x.x. installed but when I try to boot into recovery I just get this crazy bright white screen. Was able to reboot normally the first time, but then tried booting into recovery with flashify and now stock on that bright white screen. I do have success with getting connections with odin, twrp flashing successfully. But now trying to flash back to stock firmware to get my recovery back and I have mixed results. PLEASE any help would be very much appreciated...might have borked my brand new s6 edge...but hope not.
Thanks in advance.

Unsuccessful
koop1955 said:
I have been asked by several people, on the forums and via PM. I thought that I would offer a step-by-step guide.
Will This Trip Knox? Yes, it will. Installing a custom recovery such as TWRP will definitely trip Knox. From what I have read installing a ROM, even through FlashFire, will trip Knox, as will flashing a kernel.
You Don't Seem To Care About Knox That is correct. To this point the only downside is that I won't be able to use Samsung Pay and I don't plan on that anyway. BUT.....if you do care and Knox matters, stop reading now and stick with stock.
I will also recommend that you grab ODIN and a stock TAR file for your phone. You can always find the latest firmware at SamMobile, but will need to create an account and free downloads are speed capped. It will be SLOOOOW. But you will get a zip with the file that you need inside. Good to have in case of accident. Here is where I got mine: http://www.sammobile.com/firmwares/download/47474/G920PVPU1AOE2_G920PSPT1AOE2_SPR/
That said.....assume that you have a rooted S6. Install TWRP Manager from the Play store, ignore anything it says about an SD card and click on "Install TWRP." The version that you are looking for is "zerofltespr.img." You can also download that from here https://twrp.me/devices/samsunggalaxys6sprint.html and use Flashfire to install. Reboot into recovery (see http://www.androidexplained.com/galaxy-s6-recovery-mode/ for an explanation) and make sure that TWRP is installed. If TWRP doesn't come up, make sure that you used the correct file and try again.) Now you are ready to begin.
1) The ROM that I used is the SAC23 ROM from here: http://forum.xda-developers.com/spr...ment/sac23ram9200srintdeoxedmoddedv1-t3107342 Download that and copy to your phone. You should also grab the "Recent apps fix long press on home" zip file from the bottom of that post.
2) You will also NEED (!!!!!) a kernel that is designed for the S6, otherwise you will bork your phone. I use (and recommend) the Ktoonsez kernel located here: http://forum.xda-developers.com/spr...elopment/kernel-kt-sgs6-ocv-ktweaker-t3093009 Grab that and copy to your phone.
3) For fingerprint recognition and private mode, you will need the Aroma installer from here: http://forum.xda-developers.com/showpost.php?p=60112854&postcount=2 If you use the Aroma installer (and I don't so I have no experience) be sure that those are the only two things that you install.
Once you have those files on your phone, you are ready to begin.
Return to recovery mode. Before you do anything else....Click on "Backup." Accept the default settings and let it do its thing. I always name my backups....calling this Stock is probably a good idea. Once that is done, if you break things, you can return to this.
Okay, now go to Wipe. The old-timers will disagree, but most of the time the default "Factory Reset" is all that you need. If you are paranoid (and who isn't?) after this you can go to Advanced and choose Dalvik Cache, Cache, Data and System. But I rarely do this anymore. Complete guide for using TWRP is here: http://www.androidtipsandhacks.com/root/twrp-the-complete-guide-to-using-recovery-on-android/
Now go back to the main screen and select Install. You can select multiple zips. Flash the ROM, the kernel and that Recent Apps zip file. Be sure to set the kernel to flash after the ROM. Or you can flash them one at a time.
Once done, reboot phone and if all went well, you will see a new boot animation. First boot will take a while, let her go.
You should have a clean build so remember that you will need to reset Developers options, security (for allow Unknown sources) and other stuff.
With the Ktoonsez kernel, you will have the KTweaker app, very useful. If it doesn't install for you (and it didn't for me) the APK is located inside the zip file that you downloaded at S6\KT-SGS6-LP5.0-TW-G920P-05.28.2015.zip\system\app\ Extract that and install. I use downloaded Profiles a lot.
If all is well, but the fingerprint and private mode settings are things that you use, go back into Recovery and select ONLY those two items. I'll state again, I don't use them, have never flashed the Aroma installer and can't offer any help. I have seen that they work for some people, not for others..../me shrugs. I can't help with that.
I also use the Wicked One Theme from @dazedandconfused who is a master. See http://forum.xda-developers.com/spr...ps/theme-wicked-one-theme-s6-s6-edge-t3129822 for the theme and instructions. Be sure to follow the instructions about having the Urban theme from the Theme Store installed first. But this theme makes me very happy.
That is everything that I know....which goes to show how little I know!
EDIT: Missed a step....DOH!.... if you are using TWRP you should flash the zip file found here to address the Deep Sleep issue: http://forum.xda-developers.com/showpost.php?p=60385577&postcount=56
Happy ROM-ing.
Click to expand...
Click to collapse
I have the SM-G920P Sprint variant I downloaded all necessary zip files even the "deep sleep"zip, backed up my stock rom, wiped and installed well at least I tried. Loaded the SAC23 ROM zip, swiped to flash but the screen just went black and I found myself back at TWRP recovery screen. Tried repeatedly and to no avail. Wondering what I missed if anything.

king_ricardo said:
I have the SM-G920P Sprint variant I downloaded all necessary zip files even the "deep sleep"zip, backed up my stock rom, wiped and installed well at least I tried. Loaded the SAC23 ROM zip, swiped to flash but the screen just went black and I found myself back at TWRP recovery screen. Tried repeatedly and to no avail. Wondering what I missed if anything.
Click to expand...
Click to collapse
First off. please edit your post to not include the entire Original Post. It is both bad form and makes it difficult to find your question.
The first thing that I would do if I were you is to make sure that I had a good download of the SAC23 ROM. That is most likely where your problem is. I will check my download later and post the MD5, but you should re-download.
I checked MD5 using WinMD5 Free (shouldn't matter, there are several MD5 checkers)and the MD5 should be 3bb8163e902769f564a2f3adb3a1b7e6. Try checking that.

Android Attack said:
I have tried both. I first wiped system, data, cache, dalvik and tried that. Then, I tried dirty flash from stock, flashing the ROM, kernel, and fingerprint fix, then wiped caches, and nothing. :/
Could you start the aroma installer, and on the first slide it tells you the version. Could you tell me which version you have? Maybe we have different versions, that could be the problem.. Thank you!
Edit: I also tried the other debloated ROM you mentioned, but it did not work with nor without the Aroma installer. If anybody wants to work with me to get this working, I can provide logs and information and test out whatever is needed. Thanks!
Click to expand...
Click to collapse
Came here to say I had the same problem. The original ROM posted here was a Deodexed ROM, and the aroma tool posted was an odex version. There's an aroma installer for Deodexed Roms that works perfectly fine, just gotta use that. I'd post the link but I've been up all night and I have work in an hour lol. Have fun, the ROM is pretty nice!

@koop1955 @scott_0 have yuo guys flashed SacsROM v3?! It seems effin' amazing!! I'm verrryyy tempted to try it lol.

[ROM][6.0][VIBE] VibeUI v3.5 1631 MULTILANGUAGE (Update 1631.2) by sixito007

Code:
I am not responsible for bricked devices, dead SD cards.
YOU are choosing to make these modificiations!!!!!
I am not Developer, i'm just post share from needrom by user sixito007
This is a port from K50-T5 (Lenovo K3 Note)
Installation:
Flash zip file on TWRP Recovery:
Wipe Data, Wipe Cache, Wipe Dalvik Cache, Wipe System.
Install ROM zip
Installing Complet and Reboot.
※Please make a backup of your device before installing or updating ROM
Changes:
DOLBY ATMOS™
SU
ROOT EXPLORER,
MIRAVISION™
SONY MUSIC PLAYER ™
Port Version Information
K50-T5_USR_DEV1631_7.165.1_1607250221_mp1V2.39_CN
Originally posted Here (Needrom)
Downloads
Update-OTA Installer.zip (OTA Updater Official application) https://drive.google.com/file/d/0B4DceN8HABzoSXNJcmQ1NEJYNGc/view?usp=sharing
ROM v2 https://drive.google.com/file/d/0B4DceN8HABzoSkcxVF9wZEF1cDg/view?usp=sharing
TWRP AIO ROW https://drive.google.com/file/d/0B4DceN8HABzod3FPcDNidU5iQjQ/view?usp=sharing
Update 1631.2 https://drive.google.com/file/d/0B_rwx9TBvDU9Wnk1YWs0ODBua2s/view?usp=sharing
Error is fixed

Tried. waited for 25 mts, still remains in boot loop.

cvpillai said:
Tried. waited for 25 mts, still remains in boot loop.
Click to expand...
Click to collapse
thats sad(
How you tried to install?

I am on TWRP, MM Stock ROM. followed usual ROM instalation procedures under TWRP and flahed. Waited 25mts on boot screen.:crying::crying:

cvpillai said:
I am on TWRP, MM Stock ROM. followed usual ROM instalation procedures under TWRP and flahed. Waited 25mts on boot screen.:crying::crying:
Click to expand...
Click to collapse
Added twrp. download from first post.

cvpillai said:
I am on TWRP, MM Stock ROM. followed usual ROM instalation procedures under TWRP and flahed. Waited 25mts on boot screen.:crying::crying:
Click to expand...
Click to collapse
LINK UPDATED, Error is Fixed.

Tried. Some improvement is there. It goes up to Welcome screen, waits for Language option, remains there after choosing the language - indefinitely.

Witch kernel is used in this ROM ? Thanks

Is there any way to remove those ugly grey icon backgrounds?
Like in the first post, in the second screenshot, it can be seen that Titanium backup has a grey background
Similarly, pre-included apps like syncit has no background.
This difference of icons makes the phone look quite ugly.

Please tell me what's working wrong, or not working at all...
Added update v3.5 1631.2.
-added more Lenovo apps
-added full slovak and czech language
-added Dolby Atmos™ on Settings
-added Update system on Settings/Device info
- more free RAM memory cca.1300MB

Installed successfully. So far only Bluetooth problem detected. Shall get back after some use.:good::good:

Firefox and other apps won't open. They crash as soon as tapped. And Bluetooth isn't working.

nvidiageek said:
Firefox and other apps won't open. They crash as soon as tapped. And Bluetooth isn't working.
Click to expand...
Click to collapse
you need to install rom first, then update 1631.2, and tap "format dalvik&cache" when install ends.
after that reboot - and system works fine. only bluetooth can crush at the first boot.

Dumaxa said:
you need to install rom first, then update 1631.2, and tap "format dalvik&cache" when install ends.
after that reboot - and system works fine. only bluetooth can crush at the first boot.
Click to expand...
Click to collapse
I'll try and report.
---------- Post added at 08:32 PM ---------- Previous post was at 07:33 PM ----------
Worked. Thanks.

Update on ota updater (update-v3.5-1631.3)

I cannot take any picture in camera is show need sd card... Even i cannot take picture of my screen. Please fix this :'(

Can i install this on K50-T5 (Lenovo K3 Note)?

inouext said:
Can i install this on K50-T5 (Lenovo K3 Note)?
Click to expand...
Click to collapse
I don't think you have read the OP carefully. It clearly says that the Rom is ported FROM the K3 note. Search the relevant thread in xda for your device. It'll be there. Good day.

[D5503]Prerooted Customized IN 14.6.A.1.236 Flashable Zip for Sony Xperia Z1 Compact

Hello mates, Here is
D5503_Customized IN_1281-0184_14.6.A.1.236_R3D Prerooted Flashable Zip for Sony Xperia Z1 Compact Locked Bootloader
Made by PRFCreator_v1.3
You need only rooted phone and TWRP
For Root Xperia Z1C : https://forum.xda-developers.com/xperia-z1/general/root-xperia-z1-lollipop-5-1-1-build-14-t3246373
Or you can any well known and safe method for rooting. I have use kingroot 4.5.2.apk, after root I installed Z1C-lockeddualrecovery2.8.26.
For Dual Recovery : https://forum.xda-developers.com/showthread.php?t=2647480
In this creation you will get Stock Sony Rom 5.1.1.{ rooted with SuperSu (2.46) and Z1C-lockeddualrecovery2.8.26 }
How to Install:
1. Download file
2. Copy this zip in your sd card or internal memory( In recovery you can change default storage )
3. Boot to recovery (Use TWRP)
4. Wipe data,Cache and Dalwik Cache
5. install flashable-prerooted-signed.zip
6. Reboot to System
I have flashed on Stock Sony 14.6.A.1.236 in my Xperia Z1 Compact and tested everything is working good. There isn’t any problem in this rom. After installation this rom we can remove System apps, Ringtones etc… which are we don’t use.
In this rom I didn’t added Xposed. So you can install later.I have installed xposed-v84-sdk22-arm after flash rom.
Download Link : https://drive.google.com/open?id=0B2DnyFUiK93lZW1ncXlLd19JSDg
MD5: 3137f4b552a991d8cb8936749b772528
Download Link for Prerooted Zip with Xposed and SU 2.79 : https://1drv.ms/u/s!AqRWEkw4JbcJhBZESlNAZ2S-H0gJ
MD5: a36e3db078d8f8c0b0cca46f675f3259

how to install
How to install including md5?

jmcatamora said:
How to install including md5?
Click to expand...
Click to collapse
How to Install:
1. Download file
2. Copy this zip in your sd card or internal memory( In recovery you can change default storage )
3. Boot to recovery (Use TWRP)
4. Wipe data,Cache and Dalwik Cache
5. install flashable-prerooted-signed.zip
6. Reboot to System
There is no need to including md5, it is for checking purpose is your downloaded file is corrupted or not.

thank you
Can you help me . How to install xpose .??plz show me the download file xposed-v84-sdk22-arm and the framework.

jmcatamora said:
Can you help me . How to install xpose .??plz show me the download file xposed-v84-sdk22-arm and the framework.
Click to expand...
Click to collapse
Thanks to rovo89 for xposed support .
This is the link for download xposed framework
http://dl-xda.xposed.info/framework/sdk22/arm/
Detailed instructions for installation go to this link
https://forum.xda-developers.com/showthread.php?t=3034811

Thanks a ton for this! Worked awesome!
Since I went from stock 5.0.2 -> 5.1.1 ... I tried not wiping data and it seems everything still works fine! My apps, settings and data are all there =) ... so far w/o bugs.
I installed cyberian 7.1 camera(primary reason for my attempt at the upgrade) ... and seems to be working 100% w/o issue =)

GenTarkin said:
Thanks a ton for this! Worked awesome!
Since I went from stock 5.0.2 -> 5.1.1 ... I tried not wiping data and it seems everything still works fine! My apps, settings and data are all there =) ... so far w/o bugs.
I installed cyberian 7.1 camera(primary reason for my attempt at the upgrade) ... and seems to be working 100% w/o issue =)
Click to expand...
Click to collapse
Happy to know it is working on without wiping data.

PARESH AHAR said:
Happy to know it is working on without wiping data.
Click to expand...
Click to collapse
An update, its still working amazingly bug free!!! (w/o data wipe)
Also, *I think* battery life has much improved ... but that may be because I wiped cache and also turned off Stamina mode after reading it sucks battery life rather than help it lol!
I did run into some battery level quirkiness within the first few days of install, but hoping it was just some learning curve the OS had to do w/ battery ... time will tell =)
I do have a question tho, just noticed you state the bootloader/recovery is "locked"? Does this overwrite my previous "unlocked" state and its relocked now? Or does an unlocked state persist? Thanks

GenTarkin said:
I do have a question tho, just noticed you state the bootloader/recovery is "locked"? Does this overwrite my previous "unlocked" state and its relocked now? Or does an unlocked state persist? Thanks
Click to expand...
Click to collapse
No,this doesn't overwrite your unlocked bootloader. your unlocked state is persist.You can check by dialing *#*#7378423#*#* /Service info/Configuration/Rooting status:

Sad update, seems my phone has fallen victim to the "LP upgrade & damaged battery" coincidence =( ... I know its not a fault of ur ROM. Phone works fine from 100% to 50% then a 50% it rapidly drops to 1% and shuts off =/
That being said, ordered a replacement battery kit + back door + NFC tag. Hopefully normal battery functionality will be restored after its replaced =)
Seems to be a widespread problem =/ Its weird because I had LP 5.0.2 on it previously.

Battery replacement went well, back to full expected usage time!

blank screen after sony logo what should i do i have an unlock bootloader TWRP 3.0.2 on FotaKernel

nhicko95 said:
blank screen after sony logo what should i do i have an unlock bootloader TWRP 3.0.2 on FotaKernel
Click to expand...
Click to collapse
Bro I have tried locked bootloader. But I think GenTarkin installed on unlocked bootloader successful. First you should flash stock.ftf and after go further as first post.

Dirty flash I love you dirty flash blahblahblah
Thanks for this, just what I needed without the hasle as Gen said I just flashed over the rom I was using (mx 8.5), wiped dalvik and that other thing but kept data and now my phones overheating has stopped, installed xposed and my tweaks reinstalled themselves... Because of the dirty flash some of the apps needed updating but apart from that its ask good... Nice one

Update Zip
Zip is updated with Xposed and SU 2.79
Download Link : https://1drv.ms/u/s!AqRWEkw4JbcJhBZESlNAZ2S-H0gJ

Is there an Arabic language?

azoga said:
Is there an Arabic language?
Click to expand...
Click to collapse
Stock languages

There is a problem with Facebook and Messenger app (normal, not lite versions). When my girlfriend is trying to run these apps the screen just is just blinking (black&white) every 0,5 of sec. and nothing else is happening. Reinstalling those apps does not solve the problem.

watchoutbehindyou said:
There is a problem with Facebook and Messenger app (normal, not lite versions). When my girlfriend is trying to run these apps the screen just is just blinking (black&white) every 0,5 of sec. and nothing else is happening. Reinstalling those apps does not solve the problem.
Click to expand...
Click to collapse
You need to install an older version of facebook.

14.3.b.0.310
Can i flash this rom from stock rom 14.3.b.0.310?