By far the best forum is 4pda. A big thanks to forum member acbka aka asyan4ik
1. Eloquent
2. Phandroid
3. HTC Mania
4. Droid Sans
5. Android Hilfe
6. Frandroid
7. 4pda.ru MATE
Shendu and also for the P6
MIUI
LEWA OS
News
Unlock Codes
uppon2 said:
By far the best forum is Eloquent. Keep an eye on these 2 users 'fte9k' and 'kangvip' - I did try one of the roms out but it was all Chinese. I kept getting a constant system force close at the startup procedure sent in to bootloop. Be very careful when trying the non english roms! I do not want to hear anybody blaming me for a bricked phone.
1. Eloquent
2. Phandroid
3. HTC Mania
4. Droid Sans
5. Android Hilfe
6. Frandroid
7. MIUI
8. Unlock Codes
9. News
Click to expand...
Click to collapse
You can add a Russian forum 4pda.ru MATE
acbka said:
You can add a Russian forum 4pda.ru MATE
Click to expand...
Click to collapse
Added
I am about to try LEWA OS. I have always wanted to give this a shot but it was never available on any of my devices. I will report back
*EDIT* Look below for details
uppon2 said:
I am about to try LEWA OS. I have always wanted to give this a shot but it was never available on any of my devices. I will report back
*EDIT* I have changed my mind. I have taken a long time to setup my phone to be the way it is now and don't want to risk having to flash stock firmware again in order to fix a soft bricked phone, not that it usually worries me, it's just annoying trying to get everything perfect again (I don't rely on nandroid backups as even they aren't perfect_
Click to expand...
Click to collapse
you are wrong, backup through twrp 2.6.3.3 works perfectly! Before Recover to do
wipe - advanced wipe
-Wipe dalvik cache
-System
-Cache
-Custom Storage
-Date
restore you buckup -
reboot -
i restore stock b907 / pac man rom / my port fly ui (cm 10.1 joe.stone)
:good:
acbka said:
you are wrong, backup through twrp 2.6.3.3 works perfectly! Before Recover to do
wipe - advanced wipe
-Wipe dalvik cache
-System
-Cache
-Custom Storage
-Date
restore you buckup -
reboot -
i restore stock b907 / pac man rom / my port fly ui (cm 10.1 joe.stone)
:good:
Click to expand...
Click to collapse
I have been doing this for many years. I have goten to points of soft bricking where recovery is impossible to get in to and where I needed to enter download/bootloader modes. The only way to restore a nandroid is if I have backed it up to my computer beforehand, flashed a firmware in download/bootloader mode then re-root/unlock and flash a recovery again, transfer the nandroid to my device and hope the data has not been corrupted during the process between phone and computer. I have actually needed to do this several times and more than once the nandroid was not restorable.
MIUI V5
http://rom.miui.com/en/download/view/id/359370#top
I ended up flashing LEWA OS. Very fast and everything seems to be working fine for me. GPS is working better for me now than on stock, camera and HDR mode are great, speed is good. Wifi and Data is working flawlessly. Beautiful lockscreen and UI. All of the theming options seem to be working as well (for those familiar with MIUI etc.) The rom has a lot of visual tweaking and you can even kill the current running app by long pressing the back button *note* it does work, you just need to hold it for longer. You can also swipe in between the notifications and the switches tabs anywhere on the screen
The first time I flashed this it would not pass the boot animation. I ended up flashing B907 again and then running the bootloader unlock again (regardless of if I needed to or not) and then flashed the rom again. Step 1. Copy the LEWA rom zip and Gapps to your phone, then reboot in to recovery. 2. In TWRP; do an advanced wipe "cache, dalv, system, data" and then go to install and find the rom and install it. 3. reboot and make sure the rom loads all the way (do not bother setting up google account yet), once this happens reboot in to recovery again by holding power button and selecting reboot>recovery (inside of the rom this option is available), once you are there please install Gapps with TWRP, then reboot and enjoy.
Screenshots
Lockscreen Screenshots
Video showing off the rom (all of these features work on HAM)
uppon2 said:
I ended up flashing LEWA OS. Very fast and everything seems to be working fine for me, the only issue so far is I can not scroll left or right to select lockscreen shortcuts, I can only slide it down to unlock. Camera and HDR mode are great, speed is good. Wifi and Data is working flawlessly. Beautiful lockscreen and UI. All of the theming options seem to be working as well (for those familiar with MIUI etc.)
The first time I flashed this it would not pass the boot animation. I ended up flashing B907 again and then running the bootloader unlock again (regardless of if I needed to or not) and then flashed LEWA rom by extracted the files to a new folder and then running the Flash_All.bat from inside the folder. After the files have finished all I did was reboot and it worked this time.
Click to expand...
Click to collapse
Hi, You can put some screenshots of the ROM??
thanks.
elroysk said:
http://rom.miui.com/en/download/view/id/359370#top
Click to expand...
Click to collapse
Because of P6?
This ROM is 100% compatible with Mate?
I have not tried.
ErSergi said:
Hi, You can put some screenshots of the ROM??
thanks.
Click to expand...
Click to collapse
Here are some screen shots. (The navigation keys are like that by choice, remember I am using the Australian model so I only have 1gb of ram )
Some of the lockscreen which is actually live (I am using the BigBang theme)
elroysk said:
http://rom.miui.com/en/download/view/id/359370#top
Click to expand...
Click to collapse
hasbrone said:
Because of P6?
This ROM is 100% compatible with Mate?
Click to expand...
Click to collapse
If you look in the first post of my thread, you will see that MIUI is already listed but from a different download area and from a different author. If you scroll down you will actually find the file for Ascend Mate. I will tell you now though, the file name is the same as the P6 so I am assuming it is the same or they have used the P6 file and tweaked it. I am going to look at both files and give it a shot at running them today.
This is the file provided under the Huawei Ascend Mate
uppon2 said:
If you look in the first post of my thread, you will see that MIUI is already listed but from a different download area and from a different author. If you scroll down you will actually find the file for Ascend Mate. I will tell you now though, the file name is the same as the P6 so I am assuming it is the same or they have used the P6 file and tweaked it. I am going to look at both files and give it a shot at running them today.
This is the file provided under the Huawei Ascend Mate
Click to expand...
Click to collapse
I already installed this rom and it looks neat..
before you install make sure u replace the boot.img with ascend mates boot.img file. the one in the zip file is for P6.
Hi uppon2 , Hd video playback youtube in this ROM? works?
You can put the link in the forum, where you downloaded this ROM Lewa Os.
thanks!
I downloaded d zip...how to flash it
Sent from my HUAWEI MT1-U06
ErSergi said:
Hi uppon2 , Hd video playback youtube in this ROM? works?
You can put the link in the forum, where you downloaded this ROM Lewa Os.
thanks!
Click to expand...
Click to collapse
HD Playback is working fine for me with Youtube. You can get the file from the first post or follow my instructions below
shaun100689 said:
I downloaded d zip...how to flash it
Sent from my HUAWEI MT1-U06
Click to expand...
Click to collapse
I have already given instructions on how to flash the file and I will post them again.
The first time I flashed this it would not pass the boot animation. I ended up flashing B907 again and then running the bootloader unlock again (regardless of if I needed to or not) and then flashed LEWA rom by extracting the files to a new folder and then running the Flash_All.bat from inside the folder. After the files have finished all I did was reboot and it worked this time. I then installed Gapps after being certain that the rom would load
So is it necessity to unlock boot loader...?
Sent from my HUAWEI MT1-U06
Uppon2 , https://disk.yandex.com/public/?hash=UG0GbIYB6yTozqYOQtxz5U5g0Bf7ymAIfTr3ZqQyjg8=
I downloaded this ROM and no. bat file in order to install ...
as installed?
this link is correct, because I see this. bat file to install??
I think these instructions are not in this rom?????
The first time I flashed this it would not pass the boot animation. I ended up flashing B907 again and then running the bootloader unlock again (regardless of if I needed to or not) and then flashed LEWA rom by extracting the files to a new folder and then running the Flash_All.bat from inside the folder. After the files have finished all I did was reboot and it worked this time. I then installed Gapps after being certain that the rom would load
Related
For CM11 Nightlies:
Find nightlies here:
http://download.cyanogenmod.com/?device=n1
If you're already on CM 10.2, just wipe cache and dalvik. Flash over your current build.
If you're coming from anything else, wipe cache, dalvik, data, and system. Then flash normally.
If you want gapps, you'll have to flash gapps as well.
No need for any modified files on nightlies. I assume that official stable builds will still be defaulted to flash on stock recovery though.
————————————————————————————————
CM 10.2 Information. Please do not use the following to flash CM11!
This is the method that I used to install CyanogenMod on TWRP.
I have tested this, and it is working perfectly on CM builds:
cm-10.2-WPPH47N-n1
cm-10.2-WPPH50O-n1
I will continue to test and update as new CM builds come out until CM flashes normally on TWRP
————————————————
First - Have TWRP as your recovery (2.6.3.1). Don't ask me how to do that.
Second - Backup your ROM! Just in-case something breaks, it's not my fault, and I'm not responsible.
————————————————
Now, we begin:
Download the newest CM build for the Oppo N1 from http://www.cyanogenmod.org/hardware/oppo-n1/#images
————————————————
After downloading your CM build from the above link, you'll need to follow these instructions to get setup for flashing in TWRP.
To modify your downloaded CM file, you can use either of the two methods below:
1: You can modify it yourself. It's actually very simple, just one line change.
2: I have attached an already modified updater-script to my post. You can use that and drop it into place (the file inside the zip, not the whole zip).[/b]
YOU ONLY NEED TO USE ONE OF THESE METHODS!
Method 1: To modify the file yourself:
First, open your CM zip that you have downloaded.
Navigate to the folder: META-INF\com\google\android\
Open the updater-script
Remove the first line only! You will remove:
Code:
assert(getprop("ro.product.device") == "N1" || getprop("ro.build.product") == "N1");
Do not remove anything else unless you know exactly what you're doing!
If you modified the file within the .zip, just save the file and it should save to the CM zip.
If you extracted the .zip, save the file and then go back and rebuild the zip.
Transfer over your newly modified CM.zip file to wherever you can find it on your phone (I drop it straight in the root folder).
——————————
Method 2: To download my pre-modified updater-script
Download my attached file (updater-script.zip)
Extract the file inside the zip (there's only one file)
Open your CM zip that you have downloaded.
Navigate to the folder: META-INF\com\google\android\
Simply copy your extracted updater-script from where you extracted it and drop it into the CM zip (It should save after)
Transfer over your newly modified CM.zip file to wherever you can find it on your phone (I drop it straight in the root folder).
————————————————
Reboot into TWRP:
Advanced Wipe ->
Wipe Dalvik Cache, Cache, and Data. ***DO NOT WIPE SYSTEM***
Then install your modified CM file. Please, remember, DO NOTE WIPE SYSTEM.
Reboot system! Done!
:victory:
I hope this all makes sense...
Basically you download the CM rom
Modify or copy the updater-script into the zip
Then you move the ROM to you phone
Then you go through the above area with wiping and flashing
* Pictures are attached
* Please let me know if there are any problems with this.
* Both versions of CM released so far have identical updater-script files. The .zip that I have attached will work on both builds.
* I will keep updating as needed
• Last updated: January 1, 2014
We're working on fixing TWRP so the asserts work properly.
https://github.com/omnirom/android_bionic/commit/4482d8513920d614e3799a214c5bad07b72580d2#diff-1 broke a lot of things.
https://github.com/omnirom/android_bionic/commit/ad76c85b9ca587084089d086f954158bc0eae905 allows flashing newer firmwares on older recoveries - but not the other way around.
The short-term fix is a TWRP build made from a 4.3 tree - this is 90% done.
@OP: Working with Entropy last night to squash this bug, I flashed his newly built TWRP and was able to go back to ColorOS or CM without issue. https://dl.dropboxusercontent.com/u/22964990/n1_twrp_43.img
Entropy512 said:
We're working on fixing TWRP so the asserts work properly.
Click to expand...
Click to collapse
That's fantastic. I'm glad to hear that it's being work on/working. I suppose fixing TWRP trumps fixing the ROM :highfive:
rayfin said:
@OP: Working with Entropy last night to squash this bug, I flashed his newly built TWRP and was able to go back to ColorOS or CM without issue. https://dl.dropboxusercontent.com/u/22964990/n1_twrp_43.img
Click to expand...
Click to collapse
BTW, I'd prefer that my personal dropbox not be directly linked. The same file is now an attachment to my post in the TWRP thread.
Harfainx said:
That's fantastic. I'm glad to hear that it's being work on/working. I suppose fixing TWRP trumps fixing the ROM :highfive:
Click to expand...
Click to collapse
i have some question can u help me :3
1. this download link is the file you already fix it right ?
https://www.4shared.com/download/UPP...N-N1_FIXED.zip - No wait - Direct download link - Full flashable ROM
Click to expand...
Click to collapse
so i just have to download and flash with TWRP. dont have to fix any else ?
2. This is CM10.2 rom official for N1 work with O-Touch in the back ?
kenjilolip0p said:
so i just have to download and flash with TWRP. dont have to fix any else ?
2. This is CM10.2 rom official for N1 work with O-Touch in the back ?
Click to expand...
Click to collapse
Correct, the very top link in the OP is the full ROM. You can download the full ROM and flash it in TWRP. It's already fixed and ready to go.
So far that has been the only ROM to come out from Oppo for CM. It contains most of the ColorOS features that work. "Knock" to wake (double-tap), screen off gestures, camera orientation, etc. I'm almost positive that the back touch-pad was working. I haven't been on CM in a little bit though. I'm still working on making changes to ColorOS, and updating as I go.
Harfainx said:
Correct, the very top link in the OP is the full ROM. You can download the full ROM and flash it in TWRP. It's already fixed and ready to go.
So far that has been the only ROM to come out from Oppo for CM. It contains most of the ColorOS features that work. "Knock" to wake (double-tap), screen off gestures, camera orientation, etc. I'm almost positive that the back touch-pad was working. I haven't been on CM in a little bit though. I'm still working on making changes to ColorOS, and updating as I go.
Click to expand...
Click to collapse
Camera orientation is handled by the camera HAL blobs.
CM does have back touchpad support but it's wonky (which is why omni hasn't merged it yet, we're still discussing whether to completely rearchitect it or just fix it.)
good work
Sent from my M045 using XDA Premium 4 mobile app
Except root it works
Hi,
I tried everything and it works. But the root is not working well. I tried installing SuperSu.zip as well as apk nothing works. Any thoughts ?
Francis.
fesar said:
Hi,
I tried everything and it works. But the root is not working well. I tried installing SuperSu.zip as well as apk nothing works. Any thoughts ?
Francis.
Click to expand...
Click to collapse
I lost root as well
and superSU files insatlled into TWRP didnt work ...
any ideas how to back root acces ?
apart of it
I cannot instal via TWRP CM10.2 (4.3) cm-10.2-WPPH50O-n1-signed.zip
I v got error message
what you are latest build on ?
nowy57 said:
I lost root as well
and superSU files insatlled into TWRP didnt work ...
any ideas how to back root acces ?
apart of it
I cannot instal via TWRP CM10.2 (4.3) cm-10.2-WPPH50O-n1-signed.zip
I v got error message
what you are latest build on ?
Click to expand...
Click to collapse
Go into SuperSU and remove it in the settings (unroot). That will get rid of all of the current SuperSU stuff.
Then flash SuperSU in TWRP.
To flash the unmodified CM, you can try the TWRP in post #3 of this thread HERE.
Or you'll have to remove the same line in the updater-script. The same method posted in the OP. Don't use the uploaded updater-script that I have there though. You'll need to change your own. It's a really simple fix. You don't have to extract all the files out. You can just modify the one file (I use Notepad++).
Sometime tomorrow I'll update the whole OP to include the newest CM version. I'm about to head out to our New Year's event, so I won't be available for the evening.
Enjoy the evening everyone. I wish you all the best! :good: :victory:
i have installed TWRP from #3 - not succes install CM newest version after this
i have unthick superSU and then install again via TWRP superSU.zip after that thick superSU on system android and no succes - root acces didnt come
happy new year
-------
I am a little dissapointed couse I downloaded CM ROM from OFFICIAL SITE http://www.cyanogenmod.org/hardware/oppo-n1/#images and I cannot install it SIMPLE on my device
OP updated! The newest release of CM has been added. I'll keep on top of it from now on, sorry about the delay.
I'm not going to host the CM builds anymore, since the modification is so small from the original CM build. Everyone flashing this should be capable of making the small change that's outlined in the OP.
:highfive:
@Harfainx
it is not a problem to me to delete first line from updater-script but what then ?
I have to zip ii normally or compile using special prgogram ?
why dedicated ROM from CM/OPPO site is not allow to simple install via TWRP ?
it shuld be so easy
nowy57 said:
@Harfainx
it is not a problem to me to delete first line from updater-script but what then ?
I have to zip ii normally or compile using special prgogram ?
why dedicated ROM from CM/OPPO site is not allow to simple install via TWRP ?
it shuld be so easy
Click to expand...
Click to collapse
After dropping the file in, just save the zip again. If you haven't extracted it, you shouldn't have to do anything special.
Also, CM can easily be installed on the stock recovery. Oppo doesn't control other recoveries.
Harfainx said:
After dropping the file in, just save the zip again. If you haven't extracted it, you shouldn't have to do anything special.
Also, CM can easily be installed on the stock recovery. Oppo doesn't control other recoveries.
Click to expand...
Click to collapse
okay , I will try it and confirm
I v got mac osx
under mac I unzip ROM , deleted first line from script then zip it , it doesent work .
but under windows - working good
Harfainx said:
Reboot into TWRP:
Advanced Wipe ->
Wipe Dalvik Cache, Cache, and Data. ***DO NOT WIPE SYSTEM***
Then install your modified CM file. Please, remember, DO NOTE WIPE SYSTEM.
Reboot system! Done!
Click to expand...
Click to collapse
What's wrong with wiping system?
You don't even wipe system if you go from ColorOS to CyanogenMod?
- Frank
cm11 nightlies are out and downloadable from cyanogenmod
Harfainx said:
After dropping the file in, just save the zip again. If you haven't extracted it, you shouldn't have to do anything special.
Also, CM can easily be installed on the stock recovery. Oppo doesn't control other recoveries.
Click to expand...
Click to collapse
Cm11 nightlies are out..
Do you think we can flash on twrp
If so what would you wipe...
I was thinking about using banks minimal.. 19 MB..
Please give the community tour thoughts and a step by step tutorial..
I would download the nightly from cyanogenmod and banks gapps.. Check md5 alla onmy phone
Reboot recovery and wipe all maybe even system except sdcard
Flash cyanogen then gapps then
Rewipe cache and dalvik
Reboot
I am on omni nightlies now.. Thanks in advance
where do you see nightlies for oppo n1 ?
edit:
ohhh I see
http://download.cyanogenmod.org/?device=n1
better later than never
I just lost hope for good support and sold my oppo n1
I didnt belive for good support having it from one month and non of help from CM team
Hey guyzz.. Im Shreyans Jain from Technocraticides. A new channel on YouTube and recently uploaded a new video related to Redmi 1S.
I this video I have showed how to dual boot your Redmi 1S. You can dual boot any rom but here we have dual booted MIUI 7 with CM 13. So please guys to watch this video and if you have any issue or suggestions or problem just comment here, on the YouTube or on our page
I can't post the link as I am a new user thus plz search on YouTube
"Technocraticides"
Please do watch!!
We will continue doing experiments on this device and other devices too and Desktops too..
Text Tutorial
So here is the text tutorial of how to DUAL BOOT your Redmi 1S. :highfive:
PRE-REQUISITE
Here you need the files we need for this process and the links to these files are mentioned below
Backup of your ROM which you are using right now if you want it to use it after the dual boot process (Here MIUI 7 is backed up).
your Redmi 1S should be charged with at least 80% battery (NOT necessary but suggested).
Rooted Redmi 1S with TWRP installed.
The ROMs you want to dual boot and everything for that ROM.
Procedure:
Backup your present rom. (For eg. MIUI 7 ) using TWRP.
Now after backup in TWRP go to home ---> Click on Install ---> Navigate yourself where you have kept the downloaded files ---> Find HM1s-Sysrec.zip and flash it.
This will now delete your Internal memory and factory reset your present ROM. (So backup it before hand)
After flash phone will reboot into recovery mode. Now copy System-Menu-Data-HM1SWC in your Ext. as well as Internal storage. For this connect your device to your PC in recovery mode. Your device will get connected as MTP device. Now copy this file in both Internal as well as External storage.
Now Flash
Sysrem-Menu1.4.1-test.zip . Aroma installer will open. Then Click on English ---> Accept the terms ---> Enter The function ---> Install and Uninstall ---> Install dual system.
Now restore the ROM you backedup earlier.
After this Go to home ---> Again Flash this file ---> Again do all that ---> This time click on Install SystemChanger app ---> System1 ---> Check first option only if you are on MIUI ---> Next
After this flash UPDATE SUPERSU V2.46.zip
Now reboot to system.
When rebooted to system go to SuperSU and go to settings and click on enable SuperSU and after the process again click on it till it installs the SUPERSU again.
Press Home button.
Find the SystemChanger app. Open it ---> Click on Switching.
After a while phone will show Mi logo. Press Vol up+Power button. Phone will enter in recovery mode.
Flash the ROM you wanted in SYSTEM2.
After process Again flash Sysrem-Menu1.4.1-test.zip --->Do all that ---> Click on Install SystemChanger app ---> System2---> Check first option if it is MIUI else continue.
Root the ROM any how. (If you want to know how to root a specific ROM reply below)
Click on Reboot to System
The System will boot into System2.
Set it up.
After setting you will find SystemChanger app here too. Open it click on switching to boot into system1.
After the phone boots System 1 then congratulations.
Download Links:-
SUPERSU.ZIP(https://www.dropbox.com/s/1m65kr444umvi34/UPDATE-SuperSU-v2.46.zip?dl=0)
System-Menu-Data-HM1SWC (https://www.dropbox.com/s/ysb1h5xbgfstlsr/System-Menu-Data-HM1SWC?dl=0)
System-Menu1.4.1-test.zip(https://www.dropbox.com/s/fkix4q7zce5xm69/System-Menu1.4.1-test.zip?dl=0)
HM1s-Sysrec.zip (https://www.dropbox.com/s/kqu6jplydont9mm/HM1S-Sysrec.zip?dl=0)
If you face any problem just post below. I will solve it.
Thanks and Cheers!! :highfive:
video link
https://www.youtube.com/watch?v=3WJchyuBy_Y
sjdev00 said:
Hey guyzz.. Im Shreyans Jain from Technocraticides. A new channel on YouTube and recently uploaded a new video related to Redmi 1S.
I this video I have showed how to dual boot your Redmi 1S. You can dual boot any rom but here we have dual booted MIUI 7 with CM 13. So please guys to watch this video and if you have any issue or suggestions or problem just comment here, on the YouTube or on our page
I can't post the link as I am a new user thus plz search on YouTube
"Technocraticides"
Please do watch!!
We will continue doing experiments on this device and other devices too and Desktops too..
Click to expand...
Click to collapse
updating kernel and or rom will not break the dual boot?
cant download the needed files
antr34 said:
updating kernel and or rom will not break the dual boot?
cant download the needed files
Click to expand...
Click to collapse
Im so sorry for the files and updating kernel and ROM wont break the dual system!
does it has separate partition? is it save to use f2fs? since i use cm12.1 it support f2fs on the primary rom
antr34 said:
does it has separate partition? is it save to use f2fs? since i use cm12.1 it support f2fs on the primary rom
Click to expand...
Click to collapse
It actually divides your NAND partition into two and you can dual boot cm12.1 with any ROM.
sjdev00 said:
It actually divides your NAND partition into two and you can dual boot cm12.1 with any ROM.
Click to expand...
Click to collapse
btw i tried to install miui as secondary rom, i got fc com.android.phone, tried both 7.0.5.0.KHCMIC and 5.12.10
antr34 said:
btw i tried to install miui as secondary rom, i got fc com.android.phone, tried both 7.0.5.0.KHCMIC and 5.12.10
Click to expand...
Click to collapse
MIUI works perfectly on system partition 1. Try installing it on Sys partition 1 and other rom on System Partition 2
"7. After this Go to home ---> Again Flash this file ---> Again do all that ---> This time click on Install SystemChanger app ---> System1 ---> Check first option only if you are on MIUI ---> Next"
tried many times but no luck, till i leave them uncheck and it works, yes it for miui v7 on 1st system partition
and it didnt devide the nand entirely, they still share the same /data partition including internal sdcard. so if 1 rom do factory reset or restoring /data the other rom will have /data partition erased, is there any solution?
antr34 said:
"7. After this Go to home ---> Again Flash this file ---> Again do all that ---> This time click on Install SystemChanger app ---> System1 ---> Check first option only if you are on MIUI ---> Next"
tried many times but no luck, till i leave them uncheck and it works, yes it for miui v7 on 1st system partition
and it didnt devide the nand entirely, they still share the same /data partition including internal sdcard. so if 1 rom do factory reset or restoring /data the other rom will have /data partition erased, is there any solution?
Click to expand...
Click to collapse
You can have a backup of System2
sjdev00 said:
You can have a backup of System2
Click to expand...
Click to collapse
ehm so it rather complicated, let say i already have 2 rom installed and i want to replace 2nd rom with new 1, so i will need these steps:
1. make sure i have full backup system1
2. change to 2nd rom through the system changer app or the system changer installer
3. full wipe 2nd rom
4. go back to 1st system partition through system changer installer
5. restore /data
6. go back to 2nd system partition through system changer installer
7. install new rom
8. install system changer app
am i correct?
antr34 said:
ehm so it rather complicated, let say i already have 2 rom installed and i want to replace 2nd rom with new 1, so i will need these steps:
1. make sure i have full backup system1
2. change to 2nd rom through the system changer app or the system changer installer
3. full wipe 2nd rom
4. go back to 1st system partition through system changer installer
5. restore /data
6. go back to 2nd system partition through system changer installer
7. install new rom
8. install system changer app
am i correct?
Click to expand...
Click to collapse
Or you can do a thing
Boot into 2nd system using system changer app
Boot into recovery
Wipe and just install the ROM
Install system changer app
I hope that will work!
sjdev00 said:
Or you can do a thing
Boot into 2nd system using system changer app
Boot into recovery
Wipe and just install the ROM
Install system changer app
I hope that will work!
Click to expand...
Click to collapse
are u sure? since they share /data partition i thought both rom will have /data wiped if u do full wipe in recovery
btw i still enjoying both rom atm, not gonna change rom
antr34 said:
are u sure? since they share /data partition i thought both rom will have /data wiped if u do full wipe in recovery
btw i still enjoying both rom atm, not gonna change rom
Click to expand...
Click to collapse
no you can change the rom it will not delete any data but still keep a backup of your stuff. Cheers :highfive:
dont do it !
your phone will have some problemes , don't do dual boot with this method , i tried and now my phone have a lot pf probleme , i tried to flash miui rom with mi flash, i also tried to flash other roms buts i have always lags during the navigation and on some apps look instagram , snapchat , messanger...... and lot of .... dont do it !
Ferhat78 said:
your phone will have some problemes , don't do dual boot with this method , i tried and now my phone have a lot pf probleme , i tried to flash miui rom with mi flash, i also tried to flash other roms buts i have always lags during the navigation and on some apps look instagram , snapchat , messanger...... and lot of .... dont do it !
Click to expand...
Click to collapse
Really ? Does this cause any harm to phone ; nand to be specefic ?
Gunikmaliwal said:
Really ? Does this cause any harm to phone ; nand to be specefic ?
Click to expand...
Click to collapse
yes really , it caused harm to my phone ,my phone is working but with a lot of lags and a lot of reboots with all roms !! DON'T DO IT !
Ferhat78 said:
yes really , it caused harm to my phone ,my phone is working but with a lot of lags and a lot of reboots with all roms !! DON'T DO IT !
Click to expand...
Click to collapse
Bro you cant just criticize like that! You may encounter some problems but that doesnot mean its because of this methord. Im personally using it for over 1 month and too use snapchat, instagram, facebook, whatsapp on both roms (Not whatsapp as it can be installed on a single ROM only) but I didnt encountered any issue!
Please be sure what you are posting. You told a guy above also that the method is risky. He/She may now wint install. Please bro please.
Ferhat78 said:
yes really , it caused harm to my phone ,my phone is working but with a lot of lags and a lot of reboots with all roms !! DON'T DO IT !
Click to expand...
Click to collapse
And yeah no one reported such issue till now!
theres a new version, found it on miui forum, simple and more reliable
http://en.miui.com/thread-86971-1-1.html
i currently use it for miui+beanstalk 6.02 rom
---------- Post added at 06:53 PM ---------- Previous post was at 06:47 PM ----------
Ferhat78 said:
your phone will have some problemes , don't do dual boot with this method , i tried and now my phone have a lot pf probleme , i tried to flash miui rom with mi flash, i also tried to flash other roms buts i have always lags during the navigation and on some apps look instagram , snapchat , messanger...... and lot of .... dont do it !
Click to expand...
Click to collapse
you sure doing it the right way? cause i dont have such a problem especially with newer version. dont forget to uninstall dual boot before u flash with mi flash. cause the 2nd system partition may still be there
Here is my stock based B207 rom, Simply Google. This is great for those of you who have a hard time getting the Google Apps to work and want some extra mods and features. You must have an unlocked bootloader and TWRP installed. This rom is tested on the M2-803L. Flashing it on other versions (801L, 802L) should work but you're flashing it at your own risk. All Google Apps you can download from the Play Store have been removed from the rom. I also heavily debloated it and removed a lot of Huawei apps. Please don't ask me to add anything in as I want to keep this rom slim. Open up Tablet Manager, hit the settings icon and uncheck Smart Tune-up if Permissions Manager force closes when you open it. Please hit the Thanks button if you like the ROM.
Features & Mods:
-AdAway
-Cust Mods
-Dark M2 Theme
-Deodexed
-GBoard
-Google Play Store, Google Contacts Sync
-Heavily Debloated
-Insecure boot.img
-Marshmallow Boot Animation
-Nova Launcher
-Region Mods
-SuperSU Preinstalled
Instructions:
1. OTA or Dload to B2xx first before flashing. The ROM will not boot if you're still on anything lower than B2xx
2. Download ROM and put it on the phone's internal storage or SDCard
3. Boot into TWRP recovery.
4. Performing a factory reset using TWRP is recommended.
5. Flash the ROM
6. Reboot System
7. Profit!
Bugs:
-You tell me
Simply Google B207:
https://www.androidfilehost.com/?fid=817550096634797575
Many thanks! What a nice surprise. This seems to be the first custom rom for the m8.
Appears that it is for the 802l. Would it also work for the 801l?
At the moment I have 5.1 reverted to stock. BL unlocked.
Demianis said:
Many thanks! What a nice surprise. This seems to be the first custom rom for the m8.
Appears that it is for the 802l. Would it also work for the 801l?
At the moment I have 5.1 reverted to stock. BL unlocked.
Click to expand...
Click to collapse
It should work on both versions provided you update to stock B2xx first. After someone updates to B2xx on their 802L I need them to send me two things.
1) Their cust folder so I can integrate it into the rom.
2) Their system/emui folder. There should be a folder called oversea in there which I need to integrate into the rom.
Sorry, I don't have the b215 yet. There was no update to 6.0 till now and i can't find even a newer version for the 801l then the one attached.
Demianis said:
Sorry, I don't have the b215 yet. There was no update to 6.0 till now and i can't find even a newer version for the 801l then the one attached.
Click to expand...
Click to collapse
The B215 update posted in one of these threads is for the 801L because when I flashed it I had no cellular data option at all.
Just tried to install the b019. But again it's a incompatible version. I guess it's because it's for the m2 803l.
Anyway, thanks for your help. I'll have to wait until until the official update hits my tab.
I tried with hisuite, but i have already the latest version available.
Hi. Thanks for the rom. I have 802l - b006 with unlock bootloader. Can I use your rom without updating to b219? I dont have any ota update that I can installl
Thanks
Sent from my HUAWEI M2-802L using XDA-Developers mobile app
budif said:
Hi. Thanks for the rom. I have 802l - b006 with unlock bootloader. Can I use your rom without updating to b219? I dont have any ota update that I can installl
Thanks
Sent from my HUAWEI M2-802L using XDA-Developers mobile app
Click to expand...
Click to collapse
No, things like wifi won't work unless you upgrade to B211 first. Hold off on flashing until I sort out the root issue. Systemless root causes freezes. I'm working on porting the kernel from the X2 so I can use regular root which will fix the freezing issues.
New build up. Fixed root causes freezing in apps.
Do you know where to get the b011? The b006 is the latest rom that I can find for my m2.
Sent from my HUAWEI M2-802L using XDA-Developers mobile app
budif said:
Do you know where to get the b011? The b006 is the latest rom that I can find for my m2.
Sent from my HUAWEI M2-802L using XDA-Developers mobile app
Click to expand...
Click to collapse
You're gonna have to wait until you get the OTA to B215. Then you can flash this rom.
Installed this last night after updating to B207 from the other thread. Works perfectly, thanks!!
how can i remove 3g above my signal? my data is turned off and it still shows
New update. Fixed Multi-Screen not working. Rebased the rom to the International B207 version. Deodexed and added more mods.
ajsmsg78 said:
New update. Fixed Multi-Screen not working. Rebased the rom to the International B207 version. Deodexed and added more mods.
Click to expand...
Click to collapse
Currently I'm using your rom with xposed included.
Is the update also for this version available?
Lots of thanks for your work!
Demianis said:
Currently I'm using your rom with xposed included.
Is the update also for this version available?
Lots of thanks for your work!
Click to expand...
Click to collapse
I didn't integrate xposed this time because I figured if someone wanted it they can install it separately. You can grab it here:
https://drive.google.com/folderview?id=0B5I_q70mNuR4OWRaejdUdE1fcjA
ajsmsg78 said:
I didn't integrate xposed this time because I figured if someone wanted it they can install it separately. You can grab it here:
https://drive.google.com/folderview?id=0B5I_q70mNuR4OWRaejdUdE1fcjA
Click to expand...
Click to collapse
Ok, many thanks for the links. I will uninstall xposed, then dirty flash and after the first boot install xposed again.
my 801w was detected during installation as 802l. Don't know if this is what's causing the trouble, but after installing via TWRP, coming from some b2xx official ROM, i'm stuck at the Huawei Bootscreen for about 10 minutes now. I know that the first start could take a lot of time, but this seems a bit unusual to me. I'll keep it watching for another 15-20 minutes and see if it boots up fine or is frozen in any way.
[Update] so it was stuck in a loop for sure. I tried flashing a clean b2xx from another thread, which booted fine, and dirty flashing your ROM over, but same behaviour. What actually DID work is flashing the boot.img from stock over your ROM, so keeping the other partitions from Simply Google Installation. At least it's booting up now, showing the proper Android Nougat loading screen. Let's see how it works out...
toxic_garden said:
my 801w was detected during installation as 802l. Don't know if this is what's causing the trouble, but after installing via TWRP, coming from some b2xx official ROM, i'm stuck at the Huawei Bootscreen for about 10 minutes now. I know that the first start could take a lot of time, but this seems a bit unusual to me. I'll keep it watching for another 15-20 minutes and see if it boots up fine or is frozen in any way.
[Update] so it was stuck in a loop for sure. I tried flashing a clean b2xx from another thread, which booted fine, and dirty flashing your ROM over, but same behaviour. What actually DID work is flashing the boot.img from stock over your ROM, so keeping the other partitions from Simply Google Installation. At least it's booting up now, showing the proper Android Nougat loading screen. Let's see how it works out...
Click to expand...
Click to collapse
I need the /cust folder from the 801w so I can add it to the rom so it shows up correctly.
ajsmsg78 said:
I need the /cust folder from the 801w so I can add it to the rom so it shows up correctly.
Click to expand...
Click to collapse
Hello
same for me, i have a W, and i'm stuck on logo menu.
I have backup my tablet in trwp before, can you send me your email ???
Thank you.
(PS: is it complicated to deoxed the huawei rom ?) Ty
translation with Google
[Basic information]
ROM Name: [HRT-Super_Lin] Huawei Mate8 full range EMUI5. 0_B580 Power smooth ROOT Lite
ROM Size: 932M
Adaptation version: Mate8 full range
Test models: Mate8 full series
Author : HRT-Super_Lin
[ROM details]
ROM based on official EMUI5. 0_B580 extract production, global odex merge
Add desktop 5X5 options, desktop long press slide, more settings, desktop layout, select
maintain the official complete style, optimize memory usage SuperSU rights management, For ROOT (Superuser)
To open the system update software, in the system / app / HwOUC. Bak Suffix for the apk
Zipalign optimization, reduce memory partition occupancy, add busybox, to facilitate the use of advanced users
delete address book Huawei customer service, to retain Huawei boot sound official Its weather components and system functional components
club.huawei.com
MT8-EMUI5.0-AL10_B580.zip
Mega Link comes later...
1. first must unlock the phone, and successfully brush into the Chinese TWRP Recovery, to ensure that the computer installed a good phone driver, download the recovery after decompression, the phone open USB debugging connected to the computer, double-click run. Bat start brushing, TWRP Recovery address Of TWRP):
MT8-EMUI5.0_TWRP.rar -> https://pan.baidu.com/s/1qXWrilm
2. Download ZIP format brush package, copied to the memory card, can be an external card can also be a built-in card, you can copy to the root directory, you can also copy to the subdirectory
3. Use the Recovery tool or in the shutdown state long press Volume 'button to enter the recovery interface. 4. After entering Recovery, click Clear Data to clear the data and return to the main interface. 5. Return to the main interface and select Install Brush Pack. The internal storage called: emmc, external storage called sdcard, click on the top of the UP A Level return to a directory) 'click Brush Pack' sliding brush into
6. Card brush is not necessary after the success of double-clear, otherwise it may lead to ROOT failure
ROM built several practical promotional software, if not, please use the re-file manager for unloading
statement: recently found someone steal my ROM to join the promotion without the test release, if found, please machine friends Report, please respect the author of labor results, forbidden based on the ROM for the second package, offenders must study
[ROM] Download
Huawei MATE8 entire network （NXT-AL10）：pan.baidu.com/s/1qXWrilm
Huawei MATE8 Telecom Edition （NXT-CL00）：pan.baidu.com/s/1c1FKBDI
Huawei MATE8 China Unicom （NXT-DL00）：pan.baidu.com/s/1pLRjMBp
Huawei MATE8 mobile version （NXT-TL00）：pan.baidu.com/s/1dFqWs85
hi
this new rom or this kang rom or what?
this for L29 or just for AL10?
i have L29 debranded to AL10 can i flash this rom over kangb577?
some info please about this rom
thanks
I have a L29C432 and am from C432B560 to Kang AL10 B580.
Hen Ry said:
I have a L29C432 and am from C432B560 to Kang AL10 B580.
Click to expand...
Click to collapse
is developer options working with you?
Can u load the link to Google or megalink for both twrp and b580 custom rom?
hamadazh said:
hi
this new rom or this kang rom or what?
this for L29 or just for AL10?
i have L29 debranded to AL10 can i flash this rom over kangb577?
some info please about this rom
thanks
Click to expand...
Click to collapse
I have L09C432B560 then I installed kangB577. I download the rom from the link and flash this rom over kangB577. This rom is similar to stock rom without gapp and with chinese apps. However the rom is rooted. There is no Kang settings in this rom.
https://mega.nz/#!IRc2Gb4Q!8NJyuJ3VC7wJpHM4EzvgYDwM9RJYeIzaOoZLM2nn8n0
Every thing went ok on L29C185 debrnded to DL00
Thanks great work.
Tried to flash this over a marshmallow rom by accident. Its stuck in "Booting Now" is there a way i can fix this? :/
BrownyDroid said:
Tried to flash this over a marshmallow rom by accident. Its stuck in "Booting Now" is there a way i can fix this? :/
Click to expand...
Click to collapse
You need to get into twrp, full wipe and restore or flash your previous rom.
[email protected] said:
You need to get into twrp, full wipe and restore or flash your previous rom.
Click to expand...
Click to collapse
I fixed it!
If anyone tries to flash from 6.0 to 7.0 and it wont boot, do what i did //
Use EMUI Recovery to grab the latest running version and let that install if you can, and then update it to EMUI 5.0 on AL10
Then install TWRP on 5.0 (I used 3.0.2.0) from this thread = https://forum.xda-developers.com/mate-8/general/twrp-3-0-2-0-mate-8-t3521215
After booting into TWRP on 7.0 the first thing i did was decrypt the data partition by going into Wipe -> Data -> Advanced and then changing it in the Change File System option from ext4 to ext2, and then back from 2 to 4.
It will take 20-30 mins to do going back to ext4, this is normal. then it is DONE
This allowed it to be wiped and decrypted for my AL10 model, otherwise you couldnt access the data partition properly. (And just wiping the data partition didnt work for some reason, not sure it just had errors.)
Then I flashed this rom and everything has gone smoothly since. Not a single worry at all in the world after that, no need to reflash any root privs or anything. Props to everyone for their software/firmwares respectively, I own none of this and am just saying how/what I did to get this working even after screwing it up.
If anyone accidentally flashes 7.0 over 6.0 and it wont boot, try this... ^^
EDIT - Changed, something I did didnt work the second time, fixed.
BrownyDroid said:
I fixed it!
If anyone tries to flash from 6.0 to 7.0 and it wont boot, do what i did //
Use EMUI Recovery to grab the latest running version and let that install if you can, and then update it to EMUI 5.0 on AL10
Then install TWRP on 5.0 (I used 3.0.2.0) from this thread = https://forum.xda-developers.com/mate-8/general/twrp-3-0-2-0-mate-8-t3521215
After booting into TWRP on 7.0 the first thing i did was decrypt the data partition by going into Wipe -> Data -> Advanced and then changing it in the Change File System option from 4 to 1, and then back from 1 to 4.
This allowed it to be wiped and decrypted for my AL10 model, otherwise you couldnt access the data partition properly. (And just wiping the data partition didnt work for some reason, not sure it just had errors.)
Then I flashed this rom and everything has gone smoothly since. Not a single worry at all in the world after that, no need to reflash any root privs or anything. Props to everyone for their software/firmwares respectively, I own none of this and am just saying how/what I did to get this working even after screwing it up.
If anyone accidentally flashes 7.0 over 6.0 and it wont boot, try this... ^^
Click to expand...
Click to collapse
Sorry but i don't understund, in whipe>data>change file system i have ext2, ext3, ext4, fat, exfat, f2fs. What i do? Thanks.
Inviato dal mio SM-N920F utilizzando Tapatalk
Some apps crash while navigating inside. Best example: Google Play Store, after clicking "read more" when showing app details. Other example: In Signal Messenger when entering a conversation.
I flashed Open Gapps Pico version.
Any suggestions?
[email protected] said:
You need to get into twrp, full wipe and restore or flash your previous rom.
Click to expand...
Click to collapse
entonjackson said:
Some apps crash while navigating inside. Best example: Google Play Store, after clicking "read more" when showing app details. Other example: In Signal Messenger when entering a conversation.
I flashed Open Gapps Pico version.
Any suggestions?
Click to expand...
Click to collapse
I never flashed Gapps, i went into HiApp and installed the play store through there and then updated it, worked perfectly.
After i reinstalled the rom because of some errors with the camera i was getting i ended up having some problems with google play services but I just downloaded the latest online and installed it, been smooth since.
AND i can confirm, im not getting and "read more" crashes or Messenger crashes whatsoever. Sorry to hear about your problem! If it keeps happening try backing up data, reflashing the rom or flash stock first then reflash it and try installing google play store through HiApp.
I have a NXT-DL00 with a custom rom , rooted,TWRP etc... can I install your NXT-AL10 version?
batman74 said:
Sorry but i don't understund, in whipe>data>change file system i have ext2, ext3, ext4, fat, exfat, f2fs. What i do? Thanks.
Inviato dal mio SM-N920F utilizzando Tapatalk
Click to expand...
Click to collapse
Sorry! Updated.
I went and changed it from ext4 to ext2 which took only less than 1 min, and then from ext2 to ext4 which took about half an hour.
Then it worked!
(Sorry for the confusion)
---------- Post added at 09:31 AM ---------- Previous post was at 09:28 AM ----------
stratanic said:
I have a NXT-DL00 with a custom rom , rooted,TWRP etc... can I install your NXT-AL10 version?
Click to expand...
Click to collapse
If you try anyways, make sure you make a backup of your current rom before flashing and tell us what you did/results.
If its on a 6.0 rom you can follow the mini guide I had written, get yourself into EMUI 5.0 before you flash it. either by the official updater if you can by Restoring through the EMUI recovery back to stock and updating, or flashing an EMUI 5 rom and getting 3.0.2-0 twrp on there first.
Update : Been running this rom on EMUI 5.0 since release and it is super stable and amazing to run.
Been the best rom ive had on my Mate 8, definitely deserves some more attention. My battery life is about 15-25% better than emui 4.x and the phone doesnt have wakelock and app sleep problems for me at all compared to previous roms ive used.
We just need this rom with Kang VIP and it would be 110% sweet!
Waiting for a release of Xposed to come out so i can test and report back.
ive seen some users installing this rom over the latest kangvip, that way one has best of both worlds
Sent from my Huawei Mate 8 NXT-AL10
jbmc83 said:
ive seen some users installing this rom over the latest kangvip, that way one has best of both worlds
Sent from my Huawei Mate 8 NXT-AL10
Click to expand...
Click to collapse
Hi jbmc....how to do? You mean flash kang and then dirty flash HRT? How will have both functionalities?
Also, in OP it is not clear what to wipe and what not to...
"Card brush is not necessary after the success of double-clear, otherwise it may lead to ROOT failure"....what this means exactly?
There is a new hrt b584 version available , I saw it available on the Chinese website but don't have baidu
Hello mates, Here is
D5503_Customized IN_1281-0184_14.6.A.1.236_R3D Prerooted Flashable Zip for Sony Xperia Z1 Compact Locked Bootloader
Made by PRFCreator_v1.3
You need only rooted phone and TWRP
For Root Xperia Z1C : https://forum.xda-developers.com/xperia-z1/general/root-xperia-z1-lollipop-5-1-1-build-14-t3246373
Or you can any well known and safe method for rooting. I have use kingroot 4.5.2.apk, after root I installed Z1C-lockeddualrecovery2.8.26.
For Dual Recovery : https://forum.xda-developers.com/showthread.php?t=2647480
In this creation you will get Stock Sony Rom 5.1.1.{ rooted with SuperSu (2.46) and Z1C-lockeddualrecovery2.8.26 }
How to Install:
1. Download file
2. Copy this zip in your sd card or internal memory( In recovery you can change default storage )
3. Boot to recovery (Use TWRP)
4. Wipe data,Cache and Dalwik Cache
5. install flashable-prerooted-signed.zip
6. Reboot to System
I have flashed on Stock Sony 14.6.A.1.236 in my Xperia Z1 Compact and tested everything is working good. There isn’t any problem in this rom. After installation this rom we can remove System apps, Ringtones etc… which are we don’t use.
In this rom I didn’t added Xposed. So you can install later.I have installed xposed-v84-sdk22-arm after flash rom.
Download Link : https://drive.google.com/open?id=0B2DnyFUiK93lZW1ncXlLd19JSDg
MD5: 3137f4b552a991d8cb8936749b772528
Download Link for Prerooted Zip with Xposed and SU 2.79 : https://1drv.ms/u/s!AqRWEkw4JbcJhBZESlNAZ2S-H0gJ
MD5: a36e3db078d8f8c0b0cca46f675f3259
how to install
How to install including md5?
jmcatamora said:
How to install including md5?
Click to expand...
Click to collapse
How to Install:
1. Download file
2. Copy this zip in your sd card or internal memory( In recovery you can change default storage )
3. Boot to recovery (Use TWRP)
4. Wipe data,Cache and Dalwik Cache
5. install flashable-prerooted-signed.zip
6. Reboot to System
There is no need to including md5, it is for checking purpose is your downloaded file is corrupted or not.
thank you
Can you help me . How to install xpose .??plz show me the download file xposed-v84-sdk22-arm and the framework.
jmcatamora said:
Can you help me . How to install xpose .??plz show me the download file xposed-v84-sdk22-arm and the framework.
Click to expand...
Click to collapse
Thanks to rovo89 for xposed support .
This is the link for download xposed framework
http://dl-xda.xposed.info/framework/sdk22/arm/
Detailed instructions for installation go to this link
https://forum.xda-developers.com/showthread.php?t=3034811
Thanks a ton for this! Worked awesome!
Since I went from stock 5.0.2 -> 5.1.1 ... I tried not wiping data and it seems everything still works fine! My apps, settings and data are all there =) ... so far w/o bugs.
I installed cyberian 7.1 camera(primary reason for my attempt at the upgrade) ... and seems to be working 100% w/o issue =)
GenTarkin said:
Thanks a ton for this! Worked awesome!
Since I went from stock 5.0.2 -> 5.1.1 ... I tried not wiping data and it seems everything still works fine! My apps, settings and data are all there =) ... so far w/o bugs.
I installed cyberian 7.1 camera(primary reason for my attempt at the upgrade) ... and seems to be working 100% w/o issue =)
Click to expand...
Click to collapse
Happy to know it is working on without wiping data.
PARESH AHAR said:
Happy to know it is working on without wiping data.
Click to expand...
Click to collapse
An update, its still working amazingly bug free!!! (w/o data wipe)
Also, *I think* battery life has much improved ... but that may be because I wiped cache and also turned off Stamina mode after reading it sucks battery life rather than help it lol!
I did run into some battery level quirkiness within the first few days of install, but hoping it was just some learning curve the OS had to do w/ battery ... time will tell =)
I do have a question tho, just noticed you state the bootloader/recovery is "locked"? Does this overwrite my previous "unlocked" state and its relocked now? Or does an unlocked state persist? Thanks
GenTarkin said:
I do have a question tho, just noticed you state the bootloader/recovery is "locked"? Does this overwrite my previous "unlocked" state and its relocked now? Or does an unlocked state persist? Thanks
Click to expand...
Click to collapse
No,this doesn't overwrite your unlocked bootloader. your unlocked state is persist.You can check by dialing *#*#7378423#*#* /Service info/Configuration/Rooting status:
Sad update, seems my phone has fallen victim to the "LP upgrade & damaged battery" coincidence =( ... I know its not a fault of ur ROM. Phone works fine from 100% to 50% then a 50% it rapidly drops to 1% and shuts off =/
That being said, ordered a replacement battery kit + back door + NFC tag. Hopefully normal battery functionality will be restored after its replaced =)
Seems to be a widespread problem =/ Its weird because I had LP 5.0.2 on it previously.
Battery replacement went well, back to full expected usage time!
blank screen after sony logo what should i do i have an unlock bootloader TWRP 3.0.2 on FotaKernel
nhicko95 said:
blank screen after sony logo what should i do i have an unlock bootloader TWRP 3.0.2 on FotaKernel
Click to expand...
Click to collapse
Bro I have tried locked bootloader. But I think GenTarkin installed on unlocked bootloader successful. First you should flash stock.ftf and after go further as first post.
Dirty flash I love you dirty flash blahblahblah
Thanks for this, just what I needed without the hasle as Gen said I just flashed over the rom I was using (mx 8.5), wiped dalvik and that other thing but kept data and now my phones overheating has stopped, installed xposed and my tweaks reinstalled themselves... Because of the dirty flash some of the apps needed updating but apart from that its ask good... Nice one
Update Zip
Zip is updated with Xposed and SU 2.79
Download Link : https://1drv.ms/u/s!AqRWEkw4JbcJhBZESlNAZ2S-H0gJ
Is there an Arabic language?
azoga said:
Is there an Arabic language?
Click to expand...
Click to collapse
Stock languages
There is a problem with Facebook and Messenger app (normal, not lite versions). When my girlfriend is trying to run these apps the screen just is just blinking (black&white) every 0,5 of sec. and nothing else is happening. Reinstalling those apps does not solve the problem.
watchoutbehindyou said:
There is a problem with Facebook and Messenger app (normal, not lite versions). When my girlfriend is trying to run these apps the screen just is just blinking (black&white) every 0,5 of sec. and nothing else is happening. Reinstalling those apps does not solve the problem.
Click to expand...
Click to collapse
You need to install an older version of facebook.
14.3.b.0.310
Can i flash this rom from stock rom 14.3.b.0.310?