Which is the correct way to go stock with One V? When i unlocked my bootloader, flashed an recovery, i took an backup of stock ROM with TWRP. Can i just use "Restore" function from TWRP when i have wiped the whole phone, or what?
Yes just restore it.But,of you want to go completely stock as if the phone came out the box,use an RUU.
Thanks for the answer. No, I am not staying at stock, I had just thing which i needed to do with stock. =)
Also,flash the kernel from the backup,or your restore will not work.
Hi. I backed up my phone using the backup method found here: http://android.stackexchange.com/questions/28296/full-backup-of-non-rooted-devices
This method uses CMD and creates an android backup file (.ab) I want to unlock my bootloader and add the custom clockwork recovery. Of course unlocking the bootloader wipes everything. So if i were to restore everything with the .ab file, then do the custom recovey with the superuser thing, would that give me root, and would all of my apps and data be restored as they are right now?
Probably a stupid question, but i want to be completely 100% sure i won't mess up my phone. I know its going to void warranty, which would be a problem if i dropped it of course
Thanks
It should work yes, you can also backup apps with an app called carbon. Free in the playstore.
Then unlock the bootloader,flash a custom recovery and make a backup of the stock rom in there right away too (needed when you want to go back to full stock for future updates) its called a nandroid backup.
Then root it and restore, or install a brand new custom already rooted rom
Thanks a lot
If it was a custom rom i chose to install, will it still restore? or would it need to be the original stock for the restore to work properly?
Danw20 said:
Thanks a lot
If it was a custom rom i chose to install, will it still restore? or would it need to be the original stock for the restore to work properly?
Click to expand...
Click to collapse
Afaik know you can restore apps on any rom with carbon. Watch out with restoring system data, it can crash the rom.
Because some custom roms have more changes and if you restore system parts it will break the rom. But apps should not be a problem. The most important thing is that you do a nandroid backup of the stock rom. The rest is easy to setup new in the worst case.
Brilliant. Thanks for the help, much apreciated.
Was half expecting an answer like that, i think i will give root stock a go, then probably when HTC stop updating i will be very tempted to give a custom a go.
Cheers
I have unlocked the bootloader, i think i have flashed the recovery, downloaded nandroid and still says i need root, so i downloaded the superuser thing and when i try to install the binary thing it says there is an error. Anything i can do?
Update: I have learnt Its all good now.
Good mate ! Have fun with your rooted phone
CASE CLOSED !
Hello! I am posting this because i'm new to this rooting/custom roms thing. OK. So i have a Galaxy Note 2 GT-N7100. I rooted it using odin, then tried to install new rom. Downloaded CWM, booted into recovery mode and installed new rom. After this, i accidentally pressed 'Reboot' instead of installing gapps & wiping cache and that stuff. Now, my phone starts with the new rom, but i can't get back into recovery mode to start over. When i press vol-, home and power button, after pressing vol+ it goes into download mode (i can't do anything here). Any help will be appreciated!
UPDATE! I tried to flash odin recovery, and now my phone is stuck at the bootscreen. The only thing i can do is get into download mode. PLEASE HELP!
I've managed to get rid of the problem above by installing original firmware from samsung (android 4.3) and worked. The problem is, after that, i installed X-note rom (v2.1) and i think my imei is corrupted now. When i installed x-note, it asked me if i want to make an efs backup, and i accepted. If this is the problem, does anyone know how to restore the backup made? I found it on phone memory (i know it exists) but when i go into recovery mode in cm and i click restore from /sdcard nothing happens (no files to restore). Can someone tell me how could i restore the efs backup?
P.S. I checked phone's IMEI and it starts with 0049.
darkn3ss88 said:
I've managed to get rid of the problem above by installing original firmware from samsung (android 4.3) and worked. The problem is, after that, i installed X-note rom (v2.1) and i think my imei is corrupted now. When i installed x-note, it asked me if i want to make an efs backup, and i accepted. If this is the problem, does anyone know how to restore the backup made? I found it on phone memory (i know it exists) but when i go into recovery mode in cm and i click restore from /sdcard nothing happens (no files to restore). Can someone tell me how could i restore the efs backup?
P.S. I checked phone's IMEI and it starts with 0049.
Click to expand...
Click to collapse
Alright so what is the back up extension ? Is it efs.IMG? Is it 20 KB ?
Please note that restoring efs backup has nothing to do with CWM recovery, its a program you download on PC that backs up and restores your device.
With regards,
Overdub
Sent from my GT-N7100 using Tapatalk
Hi! My efs file is .tar and it is <1kb, somewhere around 20 bytes. When i open it, it doesn't show any items in the archive.
Hi,
I have Note 4 DE that I've installed custom recovery (TWRP) and then flashed a SU.zip. Everything went smooth so I started installed my apps.
I also created a backup from TWRP (pre- and after root) and also full partitions backup using EFS Professional as described in this post so I should also have a phone-specific aboot partition backed up.
Today I booted up into recovery to show friend of myne how it looks like, then rebooted the phone and now it is stuck on Verizon red logo screen with slow blinking blue light. My attempt to hook up the cable and fire up EFS Pro ended up with error message saying that I do not have permanent root.
What should I do now? If there is no way to fix this and keep all installed apps, Is there a way to restore the phone to factory (while still keepping unlocked bootloader)?
Thank you in advance.
inseek said:
Hi,
I have Note 4 DE that I've installed custom recovery (TWRP) and then flashed a SU.zip. Everything went smooth so I started installed my apps.
I also created a backup from TWRP (pre- and after root) and also full partitions backup using EFS Professional as described in this post so I should also have a phone-specific aboot partition backed up.
Today I booted up into recovery to show friend of myne how it looks like, then rebooted the phone and now it is stuck on Verizon red logo screen with slow blinking blue light. My attempt to hook up the cable and fire up EFS Pro ended up with error message saying that I do not have permanent root.
What should I do now? If there is no way to fix this and keep all installed apps, Is there a way to restore the phone to factory (while still keepping unlocked bootloader)?
Thank you in advance.
Click to expand...
Click to collapse
Power your phone off. Pull the battery. Put the battery back in and boot into recovery (volume up, home and power). Wipe cache and delvek. While in TWRP recovery select boot system.
jpcalhoun said:
Power your phone off. Pull the battery. Put the battery back in and boot into recovery (volume up, home and power). Wipe cache and delvek. While in TWRP recovery select boot system.
Click to expand...
Click to collapse
Still on VZW red screen after booting up into recovery, selecting "Wipe", then "Advanced Wipe", checkmarking Dalvik Cache & Cache, wiping them out; and then going to "Reboot" -> System. ..
inseek said:
Still on VZW red screen after booting up into recovery, selecting "Wipe", then "Advanced Wipe", checkmarking Dalvik Cache & Cache, wiping them out; and then going to "Reboot" -> System. ..
Click to expand...
Click to collapse
Hmmm, Ok. Don't worry about your bootloader it is alright, not locked. I recommend you restore your backup, either a rooted backup or a stock backup that you made right after you installed TWRP. This time wipe cache, system and delvek. I'm trying to keep you have having to wipe data, but if this doesn't work then you'll need to do a complete wipe and factory reset and then restore your backup. You may loose root, if so then after restoring your backup flash the SuperSU.zip again to regain root.
jpcalhoun said:
Hmmm, Ok. Don't worry about your bootloader it is alright, not locked. I recommend you restore your backup, either a rooted backup or a stock backup that you made right after you installed TWRP. This time wipe cache, system and delvek. I'm trying to keep you have having to wipe data, but if this doesn't work then you'll need to do a complete wipe and factory reset and then restore your backup. You may loose root, if so then after restoring your backup flash the SuperSU.zip again to regain root.
Click to expand...
Click to collapse
OK, once I wipe Delvik, Chache & System, then I have to do restore from a TWRP backup I did after flashing custom recovery, right?
I have these in the list:
Boot
Recovery
System
Data
Cache
EFS
Modem​
TWRP gives me a list of partitions above, which ones should I restore? "System" is probably the one since I've wiped it up already, do I need anything else?
Thanks
inseek said:
OK, once I wipe Delvik, Chache & System, then I have to do restore from a TWRP backup I did after flashing custom recovery, right?
I have these in the list:
Boot
Recovery
System
Data
Cache
EFS
Modem​
TWRP gives me a list of partitions above, which ones should I restore? "System" is probably the one since I've wiped it up already, do I need anything else?
Thanks
Click to expand...
Click to collapse
Yes, select restore and then select the backup you made. The backup will contain whatever partitions you selected when you made the backup (the partitions you've mentioned above). You won't be given a chance to select the partitions once you enter restore, only the backup file name.
jpcalhoun said:
Yes, select restore and then select the backup you made. The backup will contain whatever partitions you selected when you made the backup (the partitions you've mentioned above). You won't be given a chance to select the partitions once you enter restore, only the backup file name.
Click to expand...
Click to collapse
It actually gives me an option to deselect any of partitions in the list. Which one(s) should I leave selected for restore?
inseek said:
It actually gives me an option to deselect any of partitions in the list. Which one(s) should I leave selected for restore?
Click to expand...
Click to collapse
Ok, well it's been awhile since I restored anything and maybe that is a new option in the latest TWRP. Anyway, do not deselect anything unless you are worried about your apps then in that case deselect data, then restore.
jpcalhoun said:
Ok, well it's been awhile since I restored anything and maybe that is a new option in the latest TWRP. Anyway, do not deselect anything unless you are worried about your apps then in that case deselect data, then restore.
Click to expand...
Click to collapse
OK, I was able to restore backup to pre-root state (without any apps installed) and then from other backup that has some apps installed. So far, so good, thank you for helping me out.
I still have a question: how do I restore to factory? I guess I need a factory image that was replaced by TWRP, and then I will use Odin to flash it? Did flashing TWRP change the KNOX bit? Is there a way to completely restore N4 DE to factory the way it came from Samsung or once custom recovery is flashed and phone rooted, there is no way back (it is showing me "Custom" every time I turn it on)? I am still in doubt if I want to keep the phone as it is very similar to my rooted N3...
inseek said:
OK, I was able to restore backup to pre-root state (without any apps installed) and then from other backup that has some apps installed. So far, so good, thank you for helping me out.
I still have a question: how do I restore to factory? I guess I need a factory image that was replaced by TWRP, and then I will use Odin to flash it? Did flashing TWRP change the KNOX bit? Is there a way to completely restore N4 DE to factory the way it came from Samsung or once custom recovery is flashed and phone rooted, there is no way back (it is showing me "Custom" every time I turn it on)? I am still in doubt if I want to keep the phone as it is very similar to my rooted N3...
Click to expand...
Click to collapse
The first backup you did after you installed TWRP through ODIN is a factory image with the exception of course of the factory recovery that was replaced by TWRP. Knox will always be part of any backup unless you uninstall Knox using something like Titanium Backup. So installing a custom recovery will not replace or uninstall Knox. I caution you not to flash any factory firmware. There is no factory firmware available for the Developer Edition. If you flash a factory firmware for the Note 4 you will lock your bootloader and what you have left is a very expensive Retail version of the Note 4...locked bootloader and all. The advantage of a Developer Edition is the unlocked bootloader...don't screw that up. As far as "Custom", I don't know how to get rid of that...there is a way I just don't remember how to do it.
I just ordered my Verizon Samsung galaxy note 4.. is there a root method available for the retail version ( non developer edition ) if so can someone point me in the direction .. I'm coming from unlocked rooted note 2.. I've been searching XDA and googling the topic today and all I'm finding is just developer edition is root able .. even searched you tube.. thank you
Sent from my SCH-I605 using XDA Free mobile app
athack said:
I just ordered my Verizon Samsung galaxy note 4.. is there a root method available for the retail version ( non developer edition ) if so can someone point me in the direction .. I'm coming from unlocked rooted note 2.. I've been searching XDA and googling the topic today and all I'm finding is just developer edition is root able .. even searched you tube.. thank you
Sent from my SCH-I605 using XDA Free mobile app
Click to expand...
Click to collapse
Currently no root for Retail/Consumer Edition Verizon Note 4.....
Sent from my SM-N910V / VZW Note 4 DE / Factory Bootloader Unlocked / Rooted / StarKissed / TWRP 2.8.1.1 trltevzw
Thank you...
manbat said:
Currently no root for Retail/Consumer Edition Verizon Note 4.....
Sent from my SM-N910V / VZW Note 4 DE / Factory Bootloader Unlocked / Rooted / StarKissed / TWRP 2.8.1.1 trltevzw
Click to expand...
Click to collapse
Sent from my SCH-I605 using XDA Free mobile app
inseek said:
OK, I was able to restore backup to pre-root state (without any apps installed) and then from other backup that has some apps installed. So far, so good, thank you for helping me out.
I still have a question: how do I restore to factory? I guess I need a factory image that was replaced by TWRP, and then I will use Odin to flash it? Did flashing TWRP change the KNOX bit? Is there a way to completely restore N4 DE to factory the way it came from Samsung or once custom recovery is flashed and phone rooted, there is no way back (it is showing me "Custom" every time I turn it on)? I am still in doubt if I want to keep the phone as it is very similar to my rooted N3...
Click to expand...
Click to collapse
inseek, let me correct a comment I made in a previous post "there is no firmware available for the Note 4". That's not entirely true. It is true that there is not a stock firmware .tar that you can ODIN that returns your phone to stock DE just like it came from Samsung. This thread http://forum.xda-developers.com/not...mware-firmware-kernel-modem-recovery-t2942937 does provide a few stock .tar files that can safely be ODIN on the DE. These files do not provide the "safety net" that we would like in terms of a complete flashing of the DE back to stock, it only provides stock .tar files for several "pieces" of a complete stock ROM and bootloader. Read the OP and post 2 and 3 very carefully before you use any of those .tar files. There is no .tar for the DE aboot/bootloader. The only way you can have a backup of aboot/bootloader is to follow the instructions here: http://forum.xda-developers.com/note-4-verizon/general/guide-vzw-note-4-backup-developer-t2962911
jpcalhoun said:
inseek, let me correct a comment I made in a previous post "there is no firmware available for the Note 4". That's not entirely true. It is true that there is not a stock firmware .tar that you can ODIN that returns your phone to stock DE just like it came from Samsung. This thread http://forum.xda-developers.com/not...mware-firmware-kernel-modem-recovery-t2942937 does provide a few stock .tar files that can safely be ODIN on the DE. These files do not provide the "safety net" that we would like in terms of a complete flashing of the DE back to stock, it only provides stock .tar files for several "pieces" of a complete stock ROM and bootloader. Read the OP and post 2 and 3 very carefully before you use any of those .tar files. There is no .tar for the DE aboot/bootloader. The only way you can have a backup of aboot/bootloader is to follow the instructions here: http://forum.xda-developers.com/note-4-verizon/general/guide-vzw-note-4-backup-developer-t2962911
Click to expand...
Click to collapse
Thank you for this update, jpcalhoun.
I've followed these threads when I first flashed TWRP so I do have a backup made via TWRP (which doesn't include aboot) plus the one created via EFS Professional. I was just wondering if there is a dump of all partitions as they are coming from the factory. I am not a specialist but I was thinking that if I have aboot (which from what I read is unique for my phone), original boot partition + the remaining partitions in my backup then I should be able to restore the phone to factory state.
Is there a way to dump all partitions from a brand new N4 DE that just came from a factory? Obviously, for EFS Professional we need custom recovery + BusyBix + root to work. TWRP is capable of backing up most partitions but not aboot/boot. The way it is now, once we flash custom recovery, there is no way back as if there is something wrong with the phone, Samsung will see that "Custom" sign on the screen and from what I've read, will just re-flash a locked bootloader prior to sending the device back to the owner. I wish I knew all this prior to ordering my N4 DE
inseek said:
Thank you for this update, jpcalhoun.
I've followed these threads when I first flashed TWRP so I do have a backup made via TWRP (which doesn't include aboot) plus the one created via EFS Professional. I was just wondering if there is a dump of all partitions as they are coming from the factory. I am not a specialist but I was thinking that if I have aboot (which from what I read is unique for my phone), original boot partition + the remaining partitions in my backup then I should be able to restore the phone to factory state.
Is there a way to dump all partitions from a brand new N4 DE that just came from a factory? Obviously, for EFS Professional we need custom recovery + BusyBix + root to work. TWRP is capable of backing up most partitions but not aboot/boot. The way it is now, once we flash custom recovery, there is no way back as if there is something wrong with the phone, Samsung will see that "Custom" sign on the screen and from what I've read, will just re-flash a locked bootloader prior to sending the device back to the owner. I wish I knew all this prior to ordering my N4 DE
Click to expand...
Click to collapse
I'm not a Linux guru or a ADB guru, but I think you can do that using command line scripts, but I can't swear to it.
I am just tired of wiping, trying a new rom, setting it up, finding problems too big to live with and repeating the process. So I used TWRP to put my backed up system back on the phone but when it boots up tons of things are missing. Google apps are all gone, no root. Did I do something wrong? I backed up all the tick boxes when I made my backups, yet so much is missing?
Flash th stock through odin. Then flash twrp and this time restore only data from nandroid.
sasank360 said:
Flash th stock through odin. Then flash twrp and this time restore only data from nandroid.
Click to expand...
Click to collapse
Thanks. I did flash my original firmware just now via odin, but I thought that would resolve my encryption problem. I made a thread about it here, I don't know if you could chime in on that thread if you have any ideas on my new issue? Thanks: http://forum.xda-developers.com/general/help/questions-relating-to-fresh-odin-t3057860