Related
I updated to B506 but I dont have Gapps anymore. So I want to downgrade to B125 or B132 but both failed at checking verlist. What can I do.
I am also not able to boot in Fastboot mode with adb and Power + Volume Down. :crying:
You could also flash GApps through TWRP...
Sent from my P6-U06 using Tapatalk
lootjelo said:
You could also flash GApps through TWRP...
Sent from my P6-U06 using Tapatalk
Click to expand...
Click to collapse
(I said that I cant go in Fastboot mode to flash TWRP again.)
OK I am now able to boot in bootloader after much testing I will try it.
I also had the vetlist problem downgrading from b014 to b125. But bootloader still worked. The only thing that worked for me was installing stock recovery jb via bootloader, afterwards a clean install of b014 again via stock recovery. And than I could install b125, also via stock recovery.
In short words:
1. Install stock recovery jb
2. Put (in your case) b506 to sdcard/dload folder
3. Reboot to stock recovery with automatic new installation of b506
4. Put b125 to sdcard/dload
5. Reboot to stock recovery with automatic installation of b125 withoutthe verlist fail.
This is the only way that worked for me from b014 to b125.
Sent from my P6-U00 using xda app-developers app
Install this Original_Recovery
You have to go back to stock recovery mode, do this using adb.
Then install KK Beta and then B125
RabbidZ said:
I updated to B506 but I dont have Gapps anymore. So I want to downgrade to B125 or B132 but both failed at checking verlist. What can I do.
I am also not able to boot in Fastboot mode with adb and Power + Volume Down. :crying:
Click to expand...
Click to collapse
To revert back on 4.2.2 flash first that: http://dl.vmall.com/c01l4l4a2y#, after that you can flash 4.2.2 without issues.
Downgrade B506
Hello,
very you please advice!
I downloaded and installed onto your phone p6-U06 Huawei B506-firmware. It works without a problem, I would like to go back to 4.2 but unfortunately downgrade from 4.4 to 4.2 does not work. Shows me that says "huawei sd card update fail".
Can you please advise what should I do with this?
Thanks
pave26 said:
Hello,
very you please advice!
I downloaded and installed onto your phone p6-U06 Huawei B506-firmware. It works without a problem, I would like to go back to 4.2 but unfortunately downgrade from 4.4 to 4.2 does not work. Shows me that says "huawei sd card update fail".
Can you please advise what should I do with this?
Thanks
Click to expand...
Click to collapse
i have the same problem...
ThePro2014 said:
i have the same problem...
Click to expand...
Click to collapse
and solved it?
pave26 said:
and solved it?
Click to expand...
Click to collapse
Yes! Thank you! firstly i downloaded the Emui 2.0 (In the up Link!) and i flashed it, With this i update de recovery, and then y flashed the b118cn !:laugh:
ThePro2014 said:
Yes! Thank you! firstly i downloaded the Emui 2.0 (In the up Link!) and i flashed it, With this i update de recovery, and then y flashed the b118cn !:laugh:
Click to expand...
Click to collapse
thank you, where you downloaded( Emui 2.0) it?
pave26 said:
thank you, where you downloaded( Emui 2.0) it?
Click to expand...
Click to collapse
Look.
1-Firstly With the phone download this:
http://dl.vmall.com/c01l4l4a2y# when you are here press the blue booton and the download are in coursing.
2-then, when the download is finished, you go to download folder and extract the .zip archive, and then put the dload o your external sd!
3-after that,you have to turn off the mobile. and the method of the 3 buttons (vol - and vol + power) the recovery will be updated!
4 - after the end of the flashing restarted again, with that before we get We traveled for updated repair fail.
5-'ll be back on the B506, now just stick a stock with dload on the external card and the 3 buttons you flash the stock rom that you have chosen with JB! regards :good:
Thanks ,,,,, it works :good:
If you want to downgrade listen to Alex - he knows what he is talking about!
See here for a little more info: http://forum.xda-developers.com/showpost.php?p=51694739&postcount=6
alex.79 said:
To revert back on 4.2.2 flash first that: http://dl.vmall.com/c01l4l4a2y#, after that you can flash 4.2.2 without issues.
Click to expand...
Click to collapse
I can't download from that link. anybody knows another link ?Thank you !
Morar Ioan Cornel said:
I can't download from that link. anybody knows another link ?Thank you !
Click to expand...
Click to collapse
Here has the fast mirror: https://mega.co.nz/#!9oEHUTiR!uVKEq6PYefO-p4_kJcJpHw2luWZT8QZ5yrnedx4rug4
thanks !!!
Falcifer said:
If you want to downgrade listen to Alex - he knows what he is talking about!
See here for a little more info: http://forum.xda-developers.com/showpost.php?p=51694739&postcount=6
Click to expand...
Click to collapse
I was testing the ART mode on the P6. I replaced the two system files. After some misbehavior of the ROM I wanted to go back to the B125. When doing a factory reset I am stuck on the Startup-Agent when choosing the WLAN(It stops and reverts to Language select -> so loop)
Can I flash this just with TRWP from dload folder on my SD-Card?
RabbidZ said:
I updated to B506 but I dont have Gapps anymore. So I want to downgrade to B125 or B132 but both failed at checking verlist. What can I do.
I am also not able to boot in Fastboot mode with adb and Power + Volume Down. :crying:
Click to expand...
Click to collapse
I have same problem, after upgrading to B506, mobile network doesnt work!!
Any one else has same problem?
Hi ,
I have the official b132 update.app installed on my device.
I want to downgrade to b125 but i don't have root.
Can i just put the update.app for b125 and update via local update over b132 ?
Exactely. I just did it and it was no Problem. [emoji106]
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
Ascend P6 B125 Rom
Alaek12 said:
Hi ,
I have the official b132 update.app installed on my device.
I want to downgrade to b125 but i don't have root.
Can i just put the update.app for b125 and update via local update over b132 ?
Click to expand...
Click to collapse
Yes
Just Download it here put to the dload folder into sd card and boot into Stock-Recovery it will automatic downgrade
Hit The Thanks Button If I Helped you
stuntmanmike82 said:
Exactely. I just did it and it was no Problem. [emoji106]
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
Click to expand...
Click to collapse
astrit1 said:
Yes
Just Download it here put to the dload folder into sd card and boot into Stock-Recovery it will automatic downgrade
Hit The Thanks Button If I Helped you
Click to expand...
Click to collapse
Worked like a charm ! Thank you !
astrit1 said:
Yes
Just Download it here put to the dload folder into sd card and boot into Stock-Recovery it will automatic downgrade
Hit The Thanks Button If I Helped you
Click to expand...
Click to collapse
It Works w/o any problems :highfive:
Hey, I have problem, unfortunately. I have b507 and when put b125 to dload and try instal on my phone I have error: secure lock. Anyone know what I should do?
aknorts said:
Hey, I have problem, unfortunately. I have b507 and when put b125 to dload and try instal on my phone I have error: secure lock. Anyone know what I should do?
Click to expand...
Click to collapse
Wait a minute you can not go from kitkat to jb so fast
first you need to put this dload folder here to sd card and flash it through dload methode
after it finished installing boot your device up, delete the old dload folder that you have installed and put the b125 dload folder
Now boot into recovery mode and it should downgrade
(If This Methode dont work install the B118CN Rom through the same way "dload way" and from B118CN Rom you can go and install the B125 Internatinal Rom "dload way" too.)
With Chinese Roms you can downgrade from KK to JB through dload
Sorry form my English
Hit Thanks If I Helped You
So first what I need instal?
aknorts said:
So first what I need instal?
Click to expand...
Click to collapse
First you need to install this here
After it finished installing you can install the B125
astrit1 said:
First you need to install this here
After it finished installing you can install the B125
Click to expand...
Click to collapse
Thx, but The URL requested is invalid. Can you give other link?
aknorts said:
Thx, but The URL requested is invalid. Can you give other link?
Click to expand...
Click to collapse
https://mega.co.nz/#!8kcVADpB!JKeDlX4WQhmAP3mclNTfIzIjVllw5sMhnrj-3KSpSc4
hi guys
my p6 was in 4.4.2 & suddently i had no voice on my phone.caz of this i downgrade to 4.2 b130 but my phone got in black screen after showing huawei logo.now after tested some firmware like b132 b125 b117 b118 & some custom firmware i coudn't bring my phone up.but i understood whenever im using chinnies frimware like 117 & 118 my phone showing android logo and 1 time show android app to process but stuck on it for a long time & battery get hot and died after 30 min.
after 4 days and searching on the internet i coldnt solve this problem.i hope somebody here can help me with this big problem.
asphalt30000 said:
hi guys
my p6 was in 4.4.2 & suddently i had no voice on my phone.caz of this i downgrade to 4.2 b130 but my phone got in black screen after showing huawei logo.now after tested some firmware like b132 b125 b117 b118 & some custom firmware i coudn't bring my phone up.but i understood whenever im using chinnies frimware like 117 & 118 my phone showing android logo and 1 time show android app to process but stuck on it for a long time & battery get hot and died after 30 min.
after 4 days and searching on the internet i coldnt solve this problem.i hope somebody here can help me with this big problem.
Click to expand...
Click to collapse
Someone help me plZzzzzzzZz
asphalt30000 said:
Someone help me plZzzzzzzZz
Click to expand...
Click to collapse
Install B510
FutureIntelligence said:
Install B510
Click to expand...
Click to collapse
tnx for replying but for instaling b510 you have to install from b132. but it cant up in any rom?!!!
asphalt30000 said:
tnx for replying but for instaling b510 you have to install from b132. but it cant up in any rom?!!!
Click to expand...
Click to collapse
is there anybody can help me?
asphalt30000 said:
is there anybody can help me?
Click to expand...
Click to collapse
Before downgrading from KK to JB you have to install this:
http://dl.vmall.com/c01l4l4a2y#
Copy to external sd card to dload folder and use 3 button method to flash. After that you can try JB rom downgrade.
iwtfmcl said:
Before downgrading from KK to JB you have to install this:
http://dl.vmall.com/c01l4l4a2y#
Copy to external sd card to dload folder and use 3 button method to flash. After that you can try JB rom downgrade.
Click to expand...
Click to collapse
tnx my frnd but i already did this way.but it didnt work
I need someone to help . PlzZzZZZZ
asphalt30000 said:
I need someone to help . PlzZzZZZZ
Click to expand...
Click to collapse
Have you tried doing a factory reset?
Remove your SD card, then boot into recovery via the 3-button method.
Select "Data/factory reset", and "clear cache", then reboot system. You can then insert your SD card again.
Hopefully your phone will boot correctly.
I have sucsh problem too... But no sucsess till now
I did all above you said
miz_pimp said:
Have you tried doing a factory reset?
Remove your SD card, then boot into recovery via the 3-button method.
Select "Data/factory reset", and "clear cache", then reboot system. You can then insert your SD card again.
Hopefully your phone will boot correctly.
Click to expand...
Click to collapse
Ya bro i did it. thousand time
asphalt30000 said:
Ya bro i did it. thousand time
Click to expand...
Click to collapse
Then flash the device again using the 3-button method immediately after?
miz_pimp said:
Then flash the device again using the 3-button method immediately after?
Click to expand...
Click to collapse
I know what u mean bro but whenever i want to flash any roms i did it this way
asphalt30000 said:
I know what u mean bro but whenever i want to flash any roms i did it this way
Click to expand...
Click to collapse
Ok, then. Just to make sure, you do have the international version of the p6, right? P6-U06?
I just can't understand how nothing is working for you, although we already know that your system IS able to boot with the Chinese firmware, just not completely.
miz_pimp said:
Ok, then. Just to make sure, you do have the international version of the p6, right? P6-U06?
I just can't understand how nothing is working for you, although we already know that your system IS able to boot with the Chinese firmware, just not completely.
Click to expand...
Click to collapse
Tnx alot bro for replying. Ya i downloaded international rom for p6 u06. All of them was for u06 . As i said b125 b132 b130 b117 b118 & ...
asphalt30000 said:
Tnx alot bro for replying. Ya i downloaded international rom for p6 u06. All of them was for u06 . As i said b125 b132 b130 b117 b118 & ...
Click to expand...
Click to collapse
Yes, but what I was asking is if the device you have is the P6-U06.
Anyway, I'm afraid I don't know how else to help you, except to suggest taking it to a service centre.
Or as a last resort, try installing TWRP. There is a guide in the TWRP thread.
PS. I'm a girl. [emoji4]
miz_pimp said:
Yes, but what I was asking is if the device you have is the P6-U06.
Anyway, I'm afraid I don't know how else to help you, except to suggest taking it to a service centre.
Or as a last resort, try installing TWRP. There is a guide in the TWRP thread.
PS. I'm a girl. [emoji4]
Click to expand...
Click to collapse
Oh sryyyy???my sis
Yeah no one can help me??. I have been searching all of the internet but nothing helps me
I instaled twrp & 3 custom rom but they are like chinnies rom unfortunately.
Again tnx my siiiis
Hi, I had a similar problem last week and here is how I finally could bring my P6 back to life:
1) Install TWRP and wipe system, data and cache
2) Install CM11 ROM and boot with it
3) Put back the B510 stock recovery
4) Install B116 stock rom by putting its Update.app in the dload folder - reboot with the three buttons and it went in recovery and I selected install from external sdcard
5) Boot with this rom, then upgrade to any verstion you like.
I hope this procedure will work for you too.
Martin
sko4a said:
Hi, I had a similar problem last week and here is how I finally could bring my P6 back to life:
1) Install TWRP and wipe system, data and cache
2) Install CM11 ROM and boot with it
3) Put back the B510 stock recovery
4) Install B116 stock rom by putting its Update.app in the dload folder - reboot with the three buttons and it went in recovery and I selected install from external sdcard
5) Boot with this rom, then upgrade to any verstion you like.
I hope this procedure will work for you too.
Martin
Click to expand...
Click to collapse
Tnx alot my frnd . I will do this and i will say the result. I hope sooooo
no its not working for me . still stucking in android logo :crying::crying::crying::crying::crying:
I got this Huawei from China market, it's P6-U06 and running Chinese B113SP02, I'm looking for a best way to make it International and update to B125>B132>KitKat. Problem is there is no option for local update, only OTA but it is says "device up to date" Also I got bootloader unlocked and TWRP 2.7.0.0 installed from
new and there is no root for a moment.
Please see pictures for more details
I it's actually running a custom ROM because atx is a dev team from china so. It don't look like a fake copy.
taaeem said:
I it's actually running a custom ROM because atx is a dev team from china so. It don't look like a fake copy.
Click to expand...
Click to collapse
Thanks I know it's no fake. The question is how to update to official kitkat if there is no "local update" option. Also I'm not sure where to find a stock recovery to force update.app file.
Recently I've successfully installed JB 4.2.2 and it seems good http://forum.xda-developers.com/showthread.php?t=2570602. I can live with it,
but how to get official kitkat on my device?
osstis said:
Thanks I know it's no fake. The question is how to update to official kitkat if there is no "local update" option. Also I'm not sure where to find a stock recovery to force update.app file.
Recently I've successfully installed JB 4.2.2 and it seems good http://forum.xda-developers.com/showthread.php?t=2570602. I can live with it,
but how to get official kitkat on my device?
Click to expand...
Click to collapse
Root your phone,download b.513 rom repacked by oxalis and flashed true twrp.
Sent from my HUAWEI P7-L07 using Tapatalk
When you want to use stock recovery than go to TWRP 2.6.3.3 for jelly bean and there should be an stock recovery for B118 this you can flash. After that you can flash the update.app for B132 and from there you can flash B512 which is the newest international firmware, if you want Chinese firmware you can update to B508.
thanks guys I will try both ways and will report
osstis said:
thanks guys I will try both ways and will report
Click to expand...
Click to collapse
That's weird. I've flashed B118 stock recovery, full wiped and forced update.app but failed, I've tried B125 and B132. Update.app has been placed in my sd memory card /dload/. For now I'm on JB custom rom with stock recovery.
Maybe because I'm on custom rom based on B120, I have no idea
SOLVED
To any one having same problem as me. Flash B118 Stock Recovery (via bootloader and fastboot commands) Download P6 Unicom EMUI2.0 from here http://dl.vmall.com/c01l4l4a2y#, unpack and copy dload folder to your memory card and install from "locale update" or force update from recovery by pressing power+volume-volume when phone is off. Next, download B132 International and make update the same way as before (update.app in dload folder). Last step, download B512 official international kitkat and again unzip and use "local update". Just remember to delete old update.app in dload folder. If you experiencing any issues, just do factory reset for fresh install. As my phone is P6-U06, I don't know if it will works for others.
Just please notice: after B132 update I've had message "android process media has stopped" and had to factory reset before update to B512 KK.
so best Idea make a backup of all your important things before you do anything.
I hope it will help to somebody else.
Hi.
Sorry to bump this, but, Osstis, how did you get your bootloader unlocked? Is it necessary to have it unlocked in order install another firmware via local update? Mine is locked, I checked. I'm running a Chinese firmware (B508) and Google Play Store force closes everytime I open it, I've tried almost everything I could find online to get it fixed but nothing works.
I want to install B512 on my P6, too. I understand that I need to install a B1xx firmware first, but I'm not sure if I need to unlock the bootloader to do it. If anyone can shed some light on this it would be greatly appreciated. I rooted my phone through the one-click methods found online, those software say my phone is rooted but the app Root Checker Basic says its not, how can I be sure?. No custom recovery installed.
Thanks.
try to get your phone in bootloader mode via adb (adb reboot bootloader)..
there type "fastboot oem unlock UUUUUUUUUUUUUUUU" (16*U)..
this worked for me (coming from intl b125 locked)..
Gesendet von meinem P6-U06
Adrianrff said:
Hi.
Sorry to bump this, but, Osstis, how did you get your bootloader unlocked? Is it necessary to have it unlocked in order install another firmware via local update? Mine is locked, I checked. I'm running a Chinese firmware (B508) and Google Play Store force closes everytime I open it, I've tried almost everything I could find online to get it fixed but nothing works.
I want to install B512 on my P6, too. I understand that I need to install a B1xx firmware first, but I'm not sure if I need to unlock the bootloader to do it. If anyone can shed some light on this it would be greatly appreciated. I rooted my phone through the one-click methods found online, those software say my phone is rooted but the app Root Checker Basic says its not, how can I be sure?. No custom recovery installed.
Thanks.
Click to expand...
Click to collapse
If you are running B508 then tou should alredy have unlocked bootloader and you can install the B512 without a problem.
Sent from my P6-U06 using xda app-developers app
blueIBI said:
try to get your phone in bootloader mode via adb (adb reboot bootloader)..
there type "fastboot oem unlock UUUUUUUUUUUUUUUU" (16*U)..
this worked for me (coming from intl b125 locked)..
Gesendet von meinem P6-U06
Click to expand...
Click to collapse
Thanks, bluelBl, I'll give that a try then.
EDIT: Didn't work. Any ideas?
what did you to get to the bootloader?
by key (power and volume) or by adb?
Gesendet von meinem P6-U06
blueIBI said:
what did you to get to the bootloader?
by key (power and volume) or by adb?
Gesendet von meinem P6-U06
Click to expand...
Click to collapse
adb.
Does that make any difference?
no..i dont think so..
but i think you missed to load the bootloader at first with the cmd "adb reboot bootloader"..
then "fastboot oem unlock UUUUUUUUUUUUUUUU"
this is what i did with the b125 when i got my phone..
Gesendet von meinem P6-U06
blueIBI said:
no..i dont think so..
but i think you missed to load the bootloader at first with the cmd "adb reboot bootloader"..
then "fastboot oem unlock UUUUUUUUUUUUUUUU"
this is what i did with the b125 when i got my phone..
Gesendet von meinem P6-U06
Click to expand...
Click to collapse
Isn't "adb reboot bootloader" simply the command to boot into bootloader? That's the first command I entered. If hadn't, I wouldn't have been able to enter "fastboot oem unlock UUUUUUUUUUUUUUUU". Would I? I might be wrong
I am spending 2 days to rescure my phone, because I am stucked in Stock recovery without ROM and "Huawei SD card update fail"... I would be really happy any help, because it is useless at this moment. Also I want to know how can I put it in fastboot?
maticex said:
I am spending 2 days to rescure my phone, because I am stucked in Stock recovery without ROM and "Huawei SD card update fail"... I would be really happy any help, because it is useless at this moment. Also I want to know how can I put it in fastboot?
Click to expand...
Click to collapse
Guide for fastboot is here: http://forum.xda-developers.com/showthread.php?t=2636231
Updates will not work if you extracted directly from internal to sd card. May work if you put the .zip or .rar on your sd card, and then extract it and update the normal way. Not 100% sure about that though! Good luck :fingers-crossed:
alfiewn said:
Guide for fastboot is here: http://forum.xda-developers.com/showthread.php?t=2636231
Updates will not work if you extracted directly from internal to sd card. May work if you put the .zip or .rar on your sd card, and then extract it and update the normal way. Not 100% sure about that though! Good luck :fingers-crossed:
Click to expand...
Click to collapse
Yeah I know, but somehow I can't accsess fastboot from recovery? I tought there is way to come in fastboot mode with hardware keys?
Can you explain what do you think because I don't know exactly what do you mean? I tried with dload method
maticex said:
Yeah I know, but somehow I can't accsess fastboot from recovery? I tought there is way to come in fastboot mode with hardware keys?
Can you explain what do you think because I don't know exactly what do you mean? I tried with dload method
Click to expand...
Click to collapse
You have to use a PC to get into fastboot, i followed the guide without problems.
What i said before might not be correct in your case so i wouldnt worry about it, sorry!
alfiewn said:
You have to use a PC to get into fastboot, i followed the guide without problems.
What i said before might not be correct in your case so i wouldnt worry about it, sorry!
Click to expand...
Click to collapse
When I am in recovery and type adb devices command there aren't any devices showing, so I really have no idea what to do.
Since you have stock recovery maybe you should try updating from a sd card, bevause if had situations when that helps.
Sent from my P6-U06 using xda app-developers app
tileeq said:
Since you have stock recovery maybe you should try updating from a sd card, bevause if had situations when that helps.
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
When I try i got Sd card update fail, but i don't have idea why. Because I put update.app in dload folder and I really don't have idea what could be wrong
which recovery did you flash?
which FW do you want to install?
Gesendet von meinem P6-U06
blueIBI said:
which recovery did you flash?
which FW do you want to install?
Gesendet von meinem P6-U06
Click to expand...
Click to collapse
I think that B510 I'm 95% sure, oR maby B506
I wanted B634 but now I don't care I just want my phone working
the easiest way is that you reflash the b510..then do a factory reset and then flash through force update method the b634..(when you have the stock recovery - shouldnt matter which Version as long as it is a kitkat one :b510 -b513 or cn version b508 or lower).
after flashing do a factory reset again and then prepare your phone as you like..
Gesendet von meinem P6-U06
blueIBI said:
the easiest way is that you reflash the b510..then do a factory reset and then flash through force update method the b634..(when you have the stock recovery - shouldnt matter which Version as long as it is a kitkat one :b510 -b513 or cn version b508 or lower).
after flashing do a factory reset again and then prepare your phone as you like..
Gesendet von meinem P6-U06
Click to expand...
Click to collapse
How can I reflash B510? I don't have any rom installed, and B510 is in zip, so how can I flash zip with stock recovery? Also there is always Sd card update fail and I don't know why...
maticex said:
How can I reflash B510? I don't have any rom installed, and B510 is in zip, so how can I flash zip with stock recovery? Also there is always Sd card update fail and I don't know why...
Click to expand...
Click to collapse
Try to get the stock recovery from the other firmwares B511, B512, B513. I had an issue that the update failed on the B512 with B510 stock recovery, flashed B512 recovery and it worked perfectly.
taaeem said:
Try to get the stock recovery from the other firmwares B511, B512, B513. I had an issue that the update failed on the B512 with B510 stock recovery, flashed B512 recovery and it worked perfectly.
Click to expand...
Click to collapse
I will try but I cant get in fastboot because I can't select USB debugging without rom, is there any other way? because computer otherwise doesn't show my device in adb