Develop Bugs

[ROM]+[KERNEL] CM10.1 AOSP Jellybean 4.2.2 [KANG] [July-14]

CyanogenMod 10.1 Jellybean 4.2.2 - KANG
CyanogenMod is an enhanced open source firmware distribution for smartphones and tablet computers based on the Android mobile operating system. It offers features and options not found in the official firmware distributed by vendors of these devices. Features supported by CyanogenMod include native theming support, FLAC audio codec support, a large Access Point Name list, an OpenVPN client, an enhanced reboot menu, support for Wi-Fi, Bluetooth, and USB tethering, CPU overclocking and other performance enhancements, soft buttons and other "tablet tweaks", toggles in the notification pull-down (such as wi-fi, Bluetooth and GPS), app permissions management, as well as other interface enhancements. CyanogenMod does not contain spyware or bloatware. In many cases, CyanogenMod may increase performance and reliability compared with official firmware releases.
Source: CyanogenMod Wiki​
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Installation Instructions
Requirements
* Rooted (obviously)
* Basic knowledge of flashing ROMs
Installation
1: If you are coming from another ROM do a full wipe
1a: if this is just an update to THIS ROM BASE you can simply wipe cache and dalvik cache
2: Flash gapps (download below)
3: Reboot
4: Enjoy CyanogenMod 10.1
Please read the whole post for changelog, Download links, and other important info
Hey there, here is a CM-10.1 KANG, Device tree is based off of Evervolv's (thanks so much) Other then that and some patches to framework to get camera going its all CM. I also included a modified kernel. Kernel is also based off of Evervolv's with some changes. Mainly I undervolted the lower cpu freqs. by ~25mV up until 1200 Mhtz, after that freq all voltages are the same as Evervolv's. I also added some more governors. Lazy, Smartassv2, lagfree, and interactiveX. Ondemand is default. I will be updating this ROM on a regular basis. Check below for source code and more details. As always: remember it takes a FULL charge from AC, and a full discharge then re charge batteryt to be accurate. Also leave it plugged in for up to an hour at 100%, Another thing i find helps battery life is to make custom auto-adjustment values if you use auto-brightness. Check below for full changelog Feedback always welcome Please read the Kernel section for more info and full config options for the kernel.
Albinoman887
Working
SMS/MMS
Wi-FI
Data
GPS
Audio
Radio
Camera
Gnow
SD Card
Bluetooth
Native Wi-Fi Tethering
720p Video Recording
Not Working
Speaker Phone
Changelog
July-14
* CM tagged 10.1.2 (security fixes)
* Upstream: Fixed Wi-Fi toggle
* Added DeviceSettings (should be found under Settings>Advanced)
* General cleanup
* Upstream updates
July-12
* Finally got my hands on a device to test, audio is REALLY fixed now.
* CM 10.1.1 with all the latest security patches
* We are using full caf audio libs now.
* all upstream changes as of the time of release
July-10
* Upstream: CM tagged 10.1.1
* Fixed all the audio issues from last release
* Upstream changes since last release
July-2
* After a long break, Back with a very updated build, now CM-10.1+
* Huge amount of updates to the kernel. just check github
* Many Many other updates in the last two months I can't remember now
April-28
* Fixed all the bugs from last release (no audio, no camera)
* Camera button works
* Display updated to HWC1.1 (cm-10.1)
* A lot of kernel changes upstream (Evervolv) hopefully it fixes the headset heat issue.
* Various Upstream changes by CM
* Fore a more complete changelog check github
April-23
* Display repo is now 100% CM-10.1 code just with pmem support added back in
* Plethora of updates to Kernel (hoping this fixes the headset heat up issue)
* Camera button now opens Camera correctly
* Various Upstream CHanges
* cLock is fixed
* Probably a LOT of other things i can't remember between the 31st and today
Mar31
* Fixed signal strength issue when device is sleeping
* added CM powerhal to device tree (evervolv)
* Cleaned up display repo
* Bumped low-end voltages
* Fixed heat-up when using headphones/headset
* Lots of upstream kernel changes
* kernel patched to 3.0.71
* Increased wi-fi scan interval
* Increased mobile data throughput
* Upstream CM changes
Mar-28
* Upstream: Don't show pie controls for devices with hardware keys
* ameneded the memory (pmem) mapping to conform with standards
* Volume Rocker wake option got lost in merge, re-enabled
* Screen will now turn on when you plug/unplug your device
* LED notification settings in Display
* More device tree cleanup
* Upstream changes
** Also Added 2nd post with instructions for checking out source and compiling this rom **
Mar-27
* Fixed 720p video recording
* Fixed FFC video recording
* frameworks/av repo is now 100% cyanogenmod
* host of updates to display-legacy repo
* GooManager support (auto-update)
* GooManager included in ROM
* Increased PMEM size and GPU MEM size to try and reslove soft-reboots
(idea taken from my pyramid ROM/KERNEL where we had the same issue until this fix was applied)
* DEADLINE is now the default I/O Scheduler
* Upstream Changes (check gerrit for details)
Mar-24
* initial build
Kernel
ChronicKernel
Kernel now based on Evervolv's kernel with a few changes by me, including:
* Compiled with linaro
* Removed/Disabled KSM
* Removed ZRAM
* Optimized and compiled with with the "Optimize a lot, or -o3 option)
* Added more I/O schedulers
* Tweaked voltages a bit
* PMEM memory mapping tweak to remedy soft-reboots with AOSP 4.2/CM10-1
These settings were changed by me to help make the kernel more stable with our ROM, observed with tests by me. if you want to use another kernel please feel free. but support will not be provided unless you are running the kernel included with the ROM
Other Features of the kernel include:
* OC to 1900Mhtz (default 1024Mhtz, Recomended: 1200Mhtz)
* Undervolted
* Added CPU Governors: Smartassv2, lazy, lagfree, interactiveX
* User-configurable CPU OC
* User-configurable CPU default governor (ondemand = default)
* User-configurable I/O scheduler (default = DEADLINE)
Bugs
When taking a picture the screen turns green for a second. image is not effected
Notes
* As of Feb-19 CyanognMod changed the way the reboot menu works. To enable the "Advanced Reboot" menu with recovery and bootloader go to Settings>Developer Options and Check Advanced Reboot
* As of AOSP 4.2.2 ADB now has a whitelist feature. On first connect with adb it will say device offline You need to update your ADB then with the phone connected. Disable and Re-Enable Android Debugging in the Developer Options menu. It will ask if you want to accept and show the PC's RSA key. Select Yes and it will now work as expected
* As of AOSP 4.2.1 Developer Options and Performance setting menu options are hidden until you go into about phone and tap build number repeatedly (aprox. 6 times) this only needs to be done once
* If you are coming from another ROM i highly recommend you perform and Wipe Date/Factory Reset in recovery menu when applying this ROM.
* The gapps linked to does not have photosphere. As far as i know it's not supposed to. If you want photophere search for the flashable zip
* If you can't get MMS to work. Send yourself a MMS. or just wait a day. eventually they will work again
DOWNLOAD
ROM : cm-10.1-20130714-Albinoman887-glacier.zip
Gapps : gapps-jb-20130301-signed.zip
Goo.im Repo : CLICK HERE
* This ROM can also be downloaded directly with GooManager *
Source Code
Team Hydra Github (main): https://github.com/Team-Hydra
CyanogenMod Github: https://github.com/CyanogenMod
Credits
* First off of course cyanogen, the CyanogenMod project and all who contribute.
* elginsk8r for his work on the glacier device tree and kernel. These repos were the base of my build
* Evervolv Team for their device tree. This was largely what was needed to get the build going.
* jiggs82 for all his helpful hints.
* And any and all users in this thread who contirbuted or will contribute to making this ROM as stable as possible
* dastin1015 for answering all my n00bish questions, and providing helpful hints and solutions, and for being a great team partner/build partner
* android1234567 for all the help with the kernel, without you we wouldn't have new kernel
* arco for all his work on the display libs
Donations
here is a donation link if you want to buy me a coffee or pack of smokes (I go through a lot sitting on the PC messing around lol) go ahead. But not required or expected by any means
For more information like compiling, see 2nd post
Happy Flashing
Albinoman887

Compiling
first create the folder structure for your source. I suggest creating android/system n your home directory.
Now cd into this directory enter this command
Code:
repo init -u git://github.com/Team-Hydra/android.git -b cm-10.1
repo sync
Once you have done that your ready to go. simply run:
Code:
. build/envsetup.sh
./vendor/cm/get-prebuilts
lunch cm_glacier-userdebug
mka bacon
make sure before you start a new build to always run make clobber
If anyone would like to help bug bash with me feel free. if you make any progress send me a pull request
Happy Developing,
Albinoman887

Re: [ROM]+[KERNEL] CM10.1 AOSP Jellybean 4.2.2 [KANG] [Mar-24]
God job, i'll flash it today! Are these going to be nightly builds?
Sent from my myTouch 4G using xda app-developers app

THEindian said:
God job, i'll flash it today! Are these going to be nightly builds?
Sent from my myTouch 4G using xda app-developers app
Click to expand...
Click to collapse
Yeah pretty much. I might skip a couple days if there arent really any changes (a lot of times they are just translation updates) but for the most part yes

Re: [ROM]+[KERNEL] CM10.1 AOSP Jellybean 4.2.2 [KANG] [Mar-24]
albinoman887 said:
Yeah pretty much. I might skip a couple days if there arent really any changes (a lot of times they are just translation updates) but for the most part yes
Click to expand...
Click to collapse
Also, I think elginsk8r should be mentioned under the credit section, it's his device tree and kernel base you used.
Sent from my myTouch 4G using xda app-developers app

THEindian said:
Also, I think elginsk8r should be mentioned under the credit section, it's his device tree and kernel base you used.
Sent from my myTouch 4G using xda app-developers app
Click to expand...
Click to collapse
yeah i'll add it right now, i forgot his username and was too lazy to look it up lol

Re: [ROM]+[KERNEL] CM10.1 AOSP Jellybean 4.2.2 [KANG] [Mar-24]
Flash rom now...
Sent from my HTC Glacier using xda app-developers app

albinoman887 said:
Yeah pretty much. I might skip a couple days if there arent really any changes (a lot of times they are just translation updates) but for the most part yes
Click to expand...
Click to collapse
Hey Bro nice to see you expand your work over here to the glacier.I have been running your work on my sensation for a while and loving it..If this is anything like that I am sure it will not disappoint..

K-JACKS said:
Hey Bro nice to see you expand your work over here to the glacier.I have been running your work on my sensation for a while and loving it..If this is anything like that I am sure it will not disappoint..
Click to expand...
Click to collapse
i realize that you probably don't have much time, so it's fine that you mostly copied and pasted from the sensation ROM page. i just want to make sure that what's stated in the OP is what's actually going on with the kernel and such. regardless, thanks for making this ROM!
---------- Post added at 05:23 PM ---------- Previous post was at 05:21 PM ----------
especially with the reboots that a lot of the other ROMs seem to be facing...i'm sure once it gets fixed on one, it'll carry over to all of them

Re: [ROM]+[KERNEL] CM10.1 AOSP Jellybean 4.2.2 [KANG] [Mar-24]
Can I get a link for the kernel only please?
Sent from my myTouch 4G using xda app-developers app

Also, would you mind mirroring to dev host or 4Shared? Goo.IM is slow right now, i can upload if you would like

Camera cannot choose 720 p video, a front-facing camera can't video

anitgandhi said:
i realize that you probably don't have much time, so it's fine that you mostly copied and pasted from the sensation ROM page. i just want to make sure that what's stated in the OP is what's actually going on with the kernel and such. regardless, thanks for making this ROM!
---------- Post added at 05:23 PM ---------- Previous post was at 05:21 PM ----------
especially with the reboots that a lot of the other ROMs seem to be facing...i'm sure once it gets fixed on one, it'll carry over to all of them
Click to expand...
Click to collapse
Yeah the kernel info is correct
＿ⅠSmile™^_^ said:
Camera cannot choose 720 p video, a front-facing camera can't video
Click to expand...
Click to collapse
OK, good to know this is a bug. i wasn't sure if the glacier could do 720p/1080p video. its not my primary device. Is it just 720p it can do or 1080p as well. (you would think only 720p)

THEindian said:
Also, would you mind mirroring to dev host or 4Shared? Goo.IM is slow right now, i can upload if you would like
Click to expand...
Click to collapse
When i get around to it, or you can do it if you like

Re: [ROM]+[KERNEL] CM10.1 AOSP Jellybean 4.2.2 [KANG] [Mar-24]
albinoman887 said:
Yeah the kernel info is correct
OK, good to know this is a bug. i wasn't sure if the glacier could do 720p/1080p video. its not my primary device. Is it just 720p it can do or 1080p as well. (you would think only 720p)
Click to expand...
Click to collapse
Glacier does 720p video.
Sent from my myTouch 4g using xda premium

Re: [ROM]+[KERNEL] CM10.1 AOSP Jellybean 4.2.2 [KANG] [Mar-24]
cnote74 said:
Glacier does 720p video.
Sent from my myTouch 4g using xda premium
Click to expand...
Click to collapse
OK, cool I'll fix it in the morning
Sent from my HTC Sensation using Tapatalk 2

There's another CM10.1, could anyone tell me the difference between them? Looks like they are just using different kernel?

pshadoww said:
There's another CM10.1, could anyone tell me the difference between them? Looks like they are just using different kernel?
Click to expand...
Click to collapse
difference is mine is ported this is compiled, i will probably take my cm10.1 port thread and turn it into an aosp thread.

Trying this ROM:
1. Trackpad wake zip from PACman_GLACIER WORKS! (link:http://forum.xda-developers.com/showthread.php?t=1933896)
2. Settings -> security doesn't FC. which FCs in another CM10.1 ROM
3. Dev settings is hidden by default. To enable it, go to Settings -> About phone, then tap the bottom section (where it shows Build number) 7 times.
4. Antutu benchmark is pretty much the same as another CM10.1 ROM

albinoman887 said:
OK, cool I'll fix it in the morning
Sent from my HTC Sensation using Tapatalk 2
Click to expand...
Click to collapse
Just checking...is this issue fixed yet? I wanted to wait to download for a friend until it's fixed.
Thanks!!!

[ROM][PORT] CyanogenMod 11 | KitKat | BUILD 8 | 29 Nov ]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is Working?
All is Working
Issues?
HDR
WiDi
Flashing:
1. Download the zip
2. Wipe data & cache partitions of your device
3. Flashing the Rom
4. Install the PA Google Apps addon package
5. Reboot!
Download:
Click here !
Gapps:
Click here !
This is Ported from Jfltemo !
Changelog and <std_disclaimer.h> on #Post8
Credit: @albinoman887 || Click here !

Give the logcat of the camera, I have dealt with all kinds of camera errors, I know what commits to use to fix it by now xd.
And I believe IRDA is being replaced by the new internal IR module in frameworks/base. but this may be incorrect.

I do not think this is original development..

Add another issue on the list:
- Long-Press Home Button does not open Multi-Tasking.

Pleas fix the camera have waited for this so long ^^
Sent from my GT-I9505 using app: XDA Premium and rom: CarbonRom

MaKTaiL said:
Add another issue on the list:
- Long-Press Home Button does not open Multi-Tasking.
Click to expand...
Click to collapse
Can you try double tap home button, that is what is was standard on the GE roms

Klyupp said:
I do not think this is original development..
Click to expand...
Click to collapse
Right, it is not even an official jfltexx rom, but a leak from the tmobile rom with modified build.prob. maybe you should write it.
GT-I9505 / Nexus 5

Code:
Changelog:
Nov-29
* micro-skipping with FLAC audio is now fixed!
* Fixed freezing with camera from last build
* No longer using a hack to fix the sensors
* A decent amount of other under-the-hood changes i can't think of off the top of my head right now.
Nov-24
* Quicksettings / Ribbions was offically merged along with a lot of other cm stuff
* New cm boot animation
* All the camera stuff from cm-10.2 has been merged back in (ZSL support etc)
* Netfilx should work correctly now
* audio source was rebased (upstream)
* Merged all upstream kernel changes
* Just a lot of updates in general
* Added GooManager update notification support
Nov-18
* Fixed some GPS issues
* Fixed incorrect battery stats (upstream)
* Cherry-pick: A few misc audio fixes to try and fix skipping playback of flac audio
* Cherry-pick: Superuser while using ART should be fixed now
* Cherry-pick: av : squashed update of changes from CAF
* Cherry-pick: Lockscreen : Customizable shortcuts
* Cherry-pick: QuickSettings : Port from cm-10.2 (WIP)
* Cherry-pick: QuickSettings : Swipe to switch
* Cherry-pick: Framework : Improve notification shade auto-collapse code
* Cherry-pick: Framework : Make notification-shade-collapse-after-dismiss behaviour configurable
* Cherry-pick: QuickSettings: Update all QS drawables to fit KitKat
* Kernel: msm: vidc: Initialize kernel space stack variables (upstream)
* Any other upstream changes since the last build
NOTE: all changes labeled "Cherry-Pick" are patches from gerrit
Nov-15
* Fixed DL linkx (my build server is no more if anyone somehow has access to one for work or something it would and wants to share PM me. I lost my other one due to lack of funds...
* IR Blaster works
* Other things i cant remember due to the whole server mess
Changelog: - build 4
Nov-14
* sdcard issues should be fully fixed now
* Fixed proximity sensor
* Upstream updates by CM
* I feel like I'm forgetting a couple other things as well
Nov-13
* Fixed odd issues with sdcard mounting
* Build optimizations that got removed during the 4.4 merge are back now
* A whole bunch of updates by cm to frameworks, as well as media and display drivers
* Lots of bluetooth updates, and more that I'm forgetting, but a lot of bugs you guys mentioned were squashed
Nov-11-2013
* Fixed Camera
* Fixed Home button not bringing up recent apps
* Upstream: display-caf repo synced with CAF
* Upstream: media-caf repo synced with CAF
* Cherry-Pick: frameworks/av: Squashed commit of media features from CAF (http://review.cyanogenmod.org/#/c/53376/)
* Cherry-Pick: Dialer: Update icons to KitKat
* Cherry-Pick: Telephony: Update icons to KitKat
* Added ramdisk modifications for ChronicKernel so CPU can be OC'd now etc just like standalone kernel
* Probably other upstream fixes and changes
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/

RagingHarry said:
Can you try double tap home button, that is what is was standard on the GE roms
Click to expand...
Click to collapse
I tried. Nothing happens.

MaKTaiL said:
Add another issue on the list:
- Long-Press Home Button does not open Multi-Tasking.
Click to expand...
Click to collapse
Added !.

jamal2367 said:
I have created this thread because many user where else are out of control ^^
Click to expand...
Click to collapse
well said ^ ^

I've modified my self the build.prop and the update-script and now i see two problems.The first is the long press of home button doesn't appear the multitasking and the Secondo (MOST IMPORTANT) sometimes when i use the device during the charging this Freeze and reboot. Can anyone confirm this problems?

The first CM 11 on S4!
Congrats and thank you :good:

Spineshankumb said:
I've modified my self the build.prop and the update-script and now i see two problems.The first is the long press of home button doesn't appear the multitasking and the Secondo (MOST IMPORTANT) sometimes when i use the device during the charging this Freeze and reboot. Can anyone confirm this problems?
Click to expand...
Click to collapse
I got a Black Screen of Death when charging too.

vegetaleb said:
The first CM 11 on S4!
Congrats and thank you :good:
Click to expand...
Click to collapse
Thank you not for me ....for this : http://forum.xda-developers.com/showthread.php?t=2520972

MaKTaiL said:
I got a Black Screen of Death when charging too.
Click to expand...
Click to collapse
for me is this working

jamal2367 said:
Thank you not for me ....for this : http://forum.xda-developers.com/showthread.php?t=2520972
Click to expand...
Click to collapse
you should really put the credits in the topic itself!

MaKTaiL said:
I got a Black Screen of Death when charging too.
Click to expand...
Click to collapse
You really wonder about it?
I am waiting for the first posts about problems when guys flashing this build and don't know it's not really a jfltexx rom.
GT-I9505 / Nexus 5

johannes140 said:
you should really put the credits in the topic itself!
Click to expand...
Click to collapse
show the op and you see the credit

Tylog said:
You really wonder about it?
GT-I9505 / Nexus 5
Click to expand...
Click to collapse

[ROM][4.4.4][KitKat][E610/P700][20150902][Built from Source]CarbonRom

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
About Carbon
CarbonRom is an aftermarket firmware based on the Android Open Source Project. We are dedicated to fast, stable, and feature-filled roms, honesty and communication with our users, and openness with our code. We like frequent builds, with the very latest and greatest hardware support and fixes. We strive to not only provide you with the best rom we can build, but also to give back to the Android community and our fellow developers. For us, this is about creating something we can be proud of and hope you will enjoy.
Please feel free to look at, build, and use our code on CarbonDev GitHub.
We would like to thank CyanogenMod for their device trees, framework/settings mods and their code that was incorporated into this project. We also extend our gratitude to the devs whose code that we have incorporated. Proper authorship has been maintained and can be viewed on our repository.
Special thanks also go to Slim Rom for some of their features, PA, AOKP, and anyone else we may have borrowed commits from that hasn't been mentioned here. If you feel you have been unfairly left out, please - let us know.
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device, family, pets, or perception of reality. We ask that you do your part to know your device and know how to recover from problems before you flash! If you have questions, ask your fellow users or ask us in #teamcarbon on freenode IRC.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
What's working:
GSM
Receiving and making calls
Display
GPS
Sdcard
Sending/receiving SMS/MMS
Mtp/ptp
USB-tethering
Hardware video decoding & encoding
OpenGL rendering
Bluetooth tethering
Bluetooth
Wifi tethering
Touch
Video playback
Audio recording
Audio playback
Camera (photos, camcorder & panorama)
Not working/Tested:
small things
Downloads:
E610 and P700:
http://d-h.st/users/lgoptimusdev/?fld_id=46764#files
Gapps : http://forum.xda-developers.com/showthread.php?t=2779598
or
http://renderserver.net/gapps/4.4.4/
installation:
Wipe data and cache
Make sure you're using the latest CWM or TWRP
Flash ROM
Flash Google Apps (GAPPS)
Reboot
sources:
https://github.com/TeamHackLG
https://github.com/CarbonDev

Changelog for 20150902 build:
rebuilt with some changes to ril
Changelog for 20150831 build:
-Updated carbon source
-update patches
-Set NEEDS_VECTORIMPL_SYMBOLS
-Update: fix voip
-not enough memory for 20 apps
-Update audio_policy.conf
-sources are even with cm11
-built with cortex-a5
-Optimize HWUI for performance
-removed torch
-Enabled slow blur
-add touch slop to increase ui performance
-added things to speed up browser
-fixed phone call distortions
-added flags for legacy omx
-added system squisher
-added VFPv4 flags
-updated few bluetooth files
-possible fix for voip(L7 users problem)
-Allow compatibility with older recoveries
-removed apps2sd
Changelog for final build:
fixed webview bug
P700 support
fixed all previous bugs.
Updated source
Updated Adreno blobs to kitkat (kk_2.7_rb1.21)
Fixed VIDEO_ENCODE power hint
Fixed dark photo with flash enabled
Increased zram disk size to 192MB
Increased Swappiness to 100
Other general updates and fixes
Updated proprietary blobs from p710 v20 kitkat
- Using all blobs from p710 v20 expect nfc,adreno and sensor.
V9 RIL
- Kitkat RIL, dsds hack to get ril is no longer needed.
Morpho DNR (Digital Noise Reduction) support for low-ligth conditions
Fixed some selinux denials
Increased Swappiness to 100
Background app limit increased to 20
Merged p710 v20 kernel
- hardly any v20 changes effect us anyways
Other general updates and fixes
Fixed high battery drain in sleep
Fixed OMX bugs (pause/resume/fast forward/rewind)
Support apps on sd
Switched to qmi ril
Disabled HW aac decoder
Possible fix for gps battery drain
Total userspace ram is 401mb now
Some small changes/cleanup

placeholder

Great work bro !
#F4UZAN : Team Optima

Dear developers, if you please, add screenshots to the OP.

Removed I saw you fixed it

typo i guess

AndroidSlave said:
removed... I saw you fixed it
Click to expand...
Click to collapse
Sent from my Nexus 5 using Tapatalk

E612 working?
LG-E610 cihazımdan Tapatalk kullanılarak gönderildi

here is 1100mhz oc kernel for e610 and e612,works great so far,just flash in cwm.e612 not tested from me,im on e610.have fun,greeeeetz

i have uploaded oc kernel for e612 too in post above me,greeeeetz

Nice
Boots very fast. Has lots of custom tweaks I'll probably never use, and standard CyanogenMod settings like brightness slider and quick settings ribbon on status/notification pane were difficult to locate.
Gravity Box causes navigation panel (tablet mode) to turn-on and must deselect each boot.

First off, gravity box isn't compatible with anything except AOSP.
Sent from my GT-I9205 using Tapatalk

custom button settings
AndroidSlave said:
First off, gravity box isn't compatible with anything except AOSP.
Sent from my GT-I9205 using Tapatalk
Click to expand...
Click to collapse
Gravity Box is working good but for the in-persistent nav bar setting. After removing Gravity Box, it's disabled by default.
No soft reboot on the power menu. Could install Xposed APM+.
Xposed Additions enables global rotation for almost all apps including desktop, dialer, etc. but commandeers or negates the Carbon settings and you then have to manually setup in Xposed Additions.
Don't like the screen wake while in pocket setting? You can disable the hardware home key while screen is off by editing /system/usr/keylayout/7x27a_kp.kl (text file). Just need to have root write privileges turned on in file manager.

App Ops is missing some of the crucial privlidges of boot and network. Xposed/DonkyGuard and/or Cydia Substrate may enable these. Xposed BootManager only handles limited user apps, so I end up freezing more system apps than should be necessary.

-fixed- bluetooth music skipping bug
Used bluetooth for the first time with this ROM and experienced the familiar, songs incessantly skipping.
Fixed by editing init.lge.target.sh file in /system/etc/. Good practice is to create a backup of the file before opening with a text edit app.
Look for "case$device in
"e610"..."
Change "setprop lpa.decode true" to "setprop lpa.decode false" (without "")
Save text file (no file extension), hard reboot. I tried a soft reboot the first time and didn't take, so I powered it off and manually cold booted before bluetooth music worked correctly.
Aside: I realize that I've been using soft reboot too often and a couple of other things finally fixed themselves after powering down phone and cold booting (was having MTP connection issues due to bad BusyBox install).

I am back
EM so SBP edition not much alpha not tested.
Some tweakes New adreano Drivers for KK Skernel and etc
https://drive.google.com/file/d/0B9Q0am-qNiKgWnA3MmVFOUJCNlU/view?usp=sharing

Plamb1r said:
EM so SBP edition not much alpha not tested.
Some tweakes New adreano Drivers for KK Skernel and etc
https://drive.google.com/file/d/0B9Q0am-qNiKgWnA3MmVFOUJCNlU/view?usp=sharing
Click to expand...
Click to collapse
It means you will continue supporting L5:fingers-crossed:

SMILEVN said:
It means you will continue supporting L5:fingers-crossed:
Click to expand...
Click to collapse
Yes I came back soon new update of Cm11 stable 5.0 fully new

Plamb1r said:
Yes I came back soon new update of Cm11 stable 5.0 fully new
Click to expand...
Click to collapse
I'm very happy to hear that
I have waited for your update for a long time:crying:
Now i'm waiting new update:victory:
yeah, bravo:fingers-crossed:

[ROM][SM-G930F/FD/W8/S/L/K][7.1.2] CypherOS 3.6.2 [OMS][UNOFFICIAL][19 APR]

/* This project is currently in hiatus at least until the new device and kernel trees are available and sufficiently stable. Thanks for your patience and your support. */
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is Cypher. An extension to pure Android. Cypher tries maintain the purity of Android while offering useful features for users. The goal is to give the highest level of performance whilst achieving Simplicity.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
For more informations about CypherOS, visit the official site - cypheros.co
Become a part of our G+ community - JOIN
REMINDER
If you're having issues and want to submit a report (logcat) please make sure you are reporting from the stock kernel, not a modified kernel. Modified kernels can break or fix, even improve things. It depends. I can't get a full clue of the issue when you're not running the original kernel.
Click to expand...
Click to collapse
Credits
LineageOS
AICP
PureNexus
AOKP
Dirty Unicorns
and special thanks to @Fevax and @jesec (8890dev <!--our device source--> developers)​
Features
• Status bar Customization
- Quick Pulldown (Right, Left, Always)
- Smart Pulldown
- Network Traffic
- Clock Positions
- Etc.​• Quick Settings
- Enable or disable data on tap
- Layout Customization​• System
- PowerMenu Customization
- Native rootless substratum support​And many more...
Installation instructions
1. Download the latest ROM build available above
2. Download the latest GApps of your choice
3. If you're coming from any other ROM wipe everything (system, data, cache and dalvik-cache)
4. Flash ROM and then GApps in this order
5. If you want root you'll have to flash your preferred rooting method (Magisk, SuperSU... it's up to you)
6. Reboot
Enjoy CypherOS for Galaxy S7 (Exynos)!
Download Links
ROM: Android File Host
GApps: Beans GApps or Open GApps​
Known bugs and issues
* Buttons backlight setting crashes
Important notes
None at the moment, as the ROM is now very close to stable. Before reporting any bug, please ensure you correctly installed everything, that you didn't install another kernel or mods. Oh, and obviously logcat or it didn't happen
- Please note that root is not included in this ROM (it's a Cypher Team's choice); flash your preferred root method if you want root.
Sources
android_kernel_samsung_universal8890
android_device_samsung_herolte
android_device_samsung_hero-common

Changelogs
Code:
[16/04/2017]
* as before, this builds bring to the table various changes to our device tree, check GitHub for all the details
* substratum is temporarily unavailable because the specific branch can't be used at the moment
* this release is based on Android 7.1.2
* various changes to the ROM code
Older changelogs:
Code:
[27/03/2017]
* new build with a few improvements (actually, there's some work behind, check GitHub)
[21/03/2017]
* aoscphw: update class path
* revert keyhandler and configpanel implementation
* device.mk: fix code indentation
* device.mk: add improved OpenGL settings
* device.mk: add vm settings
* overlay: enable SIM hotswap
* device.mk: include Camero package
* device.mk: define first API level for CTS
* hardware: enable key management
* hardware: remove unused power management
* Revert "BoardConfig: build with DEX PREOPT"
* audio: fixed some paths and volumes
[B]+ *drum roll* substratum is back (and better than before!)[/B]
[20/03/2017]
This is the biggest update so far: I have redone the device trees and kernel to comply better with AOSCP specifications, but this time with knowledge I gathered in the past weeks of work on my projects. This update is smoother than ever and almost everything is working.
* buttons settings is fixed
* bluetooth is fixed
* unlocked various features
* implemented LED control
* added improved default settings for Doze, vibration, brightness
* CypherOS 3.6.1 is here!
* the full system is now odexed for better performance
Note that substratum support will be restored soon and buttons brightness duration still crashes, but I've done a big step forward in overall quality and use experience.
I provide a package for herolte too now.
[28/02/2017]
* from now on, I won't be manually inspecting the code to report a changelog, sorry
[22/02/2017]
* hero: add an empty camera wrapper
* camera: enable PDAF and OIS by default
* hero: compile camera wrapper
* hero: nuke charging speed indication
[21/02/2017]
* hero: enable BLE peripheral mode
* hero: add GMS Client ID of Samsung
* Revert "hero: add GMS Client ID of Samsung"
* cmhw: Add MDNIE RGB tuning capabilities
* hero: add DRM blobs
* sdcardfs: add FMODE_NONMAPPABLE flag to file->f_mode
* hero: defconfig: enable SDCARD_FS
* hero: defconfig: enable power-efficient workqueue by default
* UPSTREAM: PM / sleep: Re-implement suspend-to-idle handling
* PM / autosleep: Use workqueue for user space wakeup sources garbage collector
* PM / sleep: enable suspend-to-idle even without registered suspend_ops
* v4l2: ion: Do not set ION_FLAG_PROTECTED
* video: mdnie: Lift RGB tuning restrictions
* battery: max77854_charger: convert {current/voltage}_max to uA/uV
In addition to this, we also have sdcardfs fix and VoLTE implementation, a lot of ROM specific fixes and device source modifications.
[18/02/2017]
* improved camera
* improved fingerprint
* added support for sdcardfs
[16/02/2017]
* audio related changes for hero-common
* Android updates
* many AOSCP specific commits
* DRM content is now working
[13/02/2107]
* Reworked Doze mode
* Small fixes
[12/02/2017]
* Various audio improvements have been implemented
* Whole RIL (Radio Interface Layer) has been redone
* A few Wi-Fi fixes have been implemented
* Removed old dependencies, cleaned the whole repository and fixed some scripts
* A plethora of ROM-specific fixes related to themes and features (as we're every day closer to stable release of 3.6)
Sorry for the wait but the last two days were days of experiments :cool:
[06/02/2017]
* hero: add vulkan features
* hero: Quiet "KERNEL IS NOT SEANDROID ENFORCING" boot message
note: overall experience is now very close to daily usage, not perfect, but at a good point ;)
[04/02/2017]
- moved the hero-common branch to my source
- fixed prop mess
- other Wi-Fi fixes
- kernel updates (performance and battery improvements)
- hardware video decoding fixed
[02/02/2017]
- includes latest device specific commits from the dev branch
- ROM is now deodex
[01/02/2017]
- Fixed connectivity issues (no data or Wi-Fi)
- Fixed FCs
[29.01.2017]
- Fixed building
- Improvements in kernel
- Fingerprint recognition should be less buggy
[25.01.2017]
- Many device specific source updates and small fixes
- Wi-Fi should be working fine now
- Device tree modifications have been redone from scratch, to comply with ROM requirements better
[20.01.2017]
- Fingerprint sensor has been fixed
- Under the hood updates/fixes (Ramdisk, kernel settings and JPEG decoding)
- Many performance improvements
- Merged various device sources and proprietary files with the new ones released by Samsung (DPLT)
- Overall smoothness has been improved (and maybe battery life too)

Screenshots

kylothow said:
Yes. The previous version in the folder should be working fine. Install and set up that and then update to the latest.
Click to expand...
Click to collapse
@kylothow
Thank you for your work
should I follow this too?
Install "aoscp_herolte-3.6.1-20170331-unofficial.zip" >>Setup Rom>>then dirty flash the latest build?

CyanideIII said:
@kylothow
Thank you for your work
should I follow this too?
Install "aoscp_herolte-3.6.1-20170331-unofficial.zip" >>Setup Rom>>then dirty flash the latest build?
Click to expand...
Click to collapse
Until a solution to the Setup Wizard crash is found yes.
By the way, I'm not 100% sure it's a ROM problem.
Would you mind try using these GApps https://forum.xda-developers.com/android/software/gapps-dynamic-gapps-t3487192 to see if the SW still crashes?
Sent from my SM-G935F using Tapatalk

kylothow said:
Until a solution to the Setup Wizard crash is found yes.
By the way, I'm not 100% sure it's a ROM problem.
Would you mind try using these GApps https://forum.xda-developers.com/android/software/gapps-dynamic-gapps-t3487192 to see if the SW still crashes?
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
Sure.I will report...
EDIT: @kylothow
no Setup Wizard Crash with Mini Package

CyanideIII said:
Sure.I will report...
EDIT: @kylothow
no Setup Wizard Crash with Mini Package
Click to expand...
Click to collapse
Great.
Sent from my SM-G935F using Tapatalk

I can confirm that latest build (aoscp_herolte-3.6.2-20170416-unofficial.zip) with Beans Gapps does NOT crash Setup Wizard.
I'm on G930F, TWRP 3.1.0.0, clean install. -Flashed ROM and Gapps without rebooting or wiping cache/dalvik in between!

Great ROM!!! Thank's

only problem I see is with the brightness slider in quick menu acts funny. great rom thanks

Thanks for ROM.
I have one problem: Phone don't recognize headphones, music play over loudspeaker.
I did clean flash and tried different gapps JIC, but headphones don't work.
Everything else works great

Headphone problem
I have the same problem on latest version

Joshi1998 said:
I have the same problem on latest version
Click to expand...
Click to collapse
Every rom based on lineage 14.1 behaves in this way

shakad said:
Every rom based on lineage 14.1 behaves in this way
Click to expand...
Click to collapse
Well I haven't tested many ROMs on this device yet, but headphones do work on crDroid.

shakad said:
Every rom based on lineage 14.1 behaves in this way
Click to expand...
Click to collapse
Uh - No that's not correct - Headphones - Speaker are working just fine on some Roms.
Sent from my SM-G930W8 using Tapatalk

shaggyskunk said:
Uh - No that's not correct - Headphones - Speaker are working just fine on some Roms.
Sent from my SM-G930W8 using Tapatalk
Click to expand...
Click to collapse
Yeh sorry your right but headphones still not working here

i have a problem,the heart rate sensor flashes when i put the finger on it,any solution?
pd: i did clean flash

titaniumcocacola said:
i have a problem,the heart rate sensor flashes when i put the finger on it,any solution?
pd: i did clean flash
Click to expand...
Click to collapse
Uninstall Antutu...

shakad said:
Every rom based on lineage 14.1 behaves in this way
Click to expand...
Click to collapse
Is there any kind of fix for this? The Arise system for instance?.

Gabriel McKinnon said:
Is there any kind of fix for this? The Arise system for instance?.
Click to expand...
Click to collapse
Dont know but because i listen to alot of music thro headphones, it makes all lineage 14.1 unusable

[ROM][10.0.0] BootleggersROM 5.2 - DRG [UNOFFICIAL][STABLE]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Bootleggers ROM is an aftermarket firmware based on AOSP with some patches and fixes from LineageOS and various other projects. The idea is to bring custom features and some of the most useful apps on your device, with the goal of Making you feel like 家.
With an almost stable source, this ROM is also packed with some custom wallpapers (available on ShishuWalls), ringtones, fonts, and themes to bring to your device into a more fresh look and give you always a good experience.
Also, we got our Telegram Group to talk about the ROM, share some love, ideas or even have fun with us!
Some of the features that are included on this ROM are:
Code:
* QS Rows and Columns
* Volume Keys: Wake up, skip tracks and switch according to rotation
* Show song album cover, visualizer and battery info on Lockscreen
* Power Menu Items
* Battery LED light settings
* Suspend Actions: Make your device disable GPS and switch to 2G when you're not using it
* AppOps: Manage your apps permissions in an advanced way
* Recent Styles: Dig the new Pie Quickstep recents, go back to the classic layout or use the Android Go layout
* Network icons: Show or hide the cross, switch between 4G or LTE, use the classic icon layout before Pie or toggle roaming icon too!
Also, you can check a full list of Features available here.
Thanks to this people, this ROM could be possible, so, i have to give a big thanks to:
Code:
* Shishu (For being there)
* Ground Zero ROMs Team
* AOSPExtended
* ABC ROMs
* NitrogenOS
* AICP
* DirtyUnicorns
* Lukas Koller (Camera Roll dev)
* fxckingdeathwish (for the amazing photos for wallpaper/headers)
* OmniROM
* CyanogenMod/LineageOS
* PixelExperience
* PureNexus
* merothh
* Resurrection Remix
* AOSiP
* CrDroid
* CypherOS
* PureKat
* theimpulson
* MatiHalperin
* Project Xtended
* Pixeldust Project
* AquariOS
* Alejandro Ponce (Quetzal/Calypso dev)
* PixysOS
* The Memedo Testers team
* Every maintainer who decided to give our project a shot
* You for your interest on our project
Also if you got some ideas, bug fixes, stability improvements or want to help to support features for your device, you can do it by sending a Pull request on Bootleggers Github (check downloads and sources part) or tell us on our Telegram group (Check about us section), will be really appreciated. Got some questions about some terms we use? Check our FAQ or feel free to ask us. We appreciate your feedback and help.
Downloads:
ROM - SourceForge
GApps:
Opengapps
Device Sources:
Maintainer: Sid
Device Name: Nokia 6.1 Plus
Device Codename: DRG/DRG_sprout
Device tree
Kernel tree
Vendor tree
ROM Sources
Bootleggers Github
Device-Specific bugs:
Code:
* Selinux is permissive
* Bluetooth Audio - fix available on thread post #15
* You tell me
Screenshots will be added as attachments of this post​

FLASHING INSTRUCTIONS - the way I do it
1. Boot TWRP
2. Format data (if you are encrypted. If you are not encrypted, this is not necessary)
3. Reboot to bootloader and boot TWRP again
4. Flash ROM
5. Change slot
6. Flash gapps
7. Reboot system
UPDATING INSTRUCTIONS - the way I do it
1. Boot twrp
2. Flash zip
3. Change slot
4. Reboot to system
I'm not sure how to take updates on encrypted devices, but that isn't a problem for now
CHANGELOG
Code:
Build 16th Sept 2020
* Fix Fingerprint bug
* Re-enable File Based Encryption
Build 11th Sept 2020
* Update to Bootleggers v5.2
* Fix DT2W on locked devices
* Correct haptic feedback vibrator intensity
* Fix system sounds bug (ringtone, alarms, notification sounds not playing on speaker)
* Allow device encryption without force encryption (needs testing)
Clean Flash recommended since sources changed, but dirty flash should work too
Build 4th Sept 2020
* Initial build

I would like to offer a special thanks to a bunch of people who've been with me through this ridiculous journey of mine:
@Sahil_Sonar - for all the help and advice he's given
@krushndayshmookh - for being a generally sweet guy and looking out for me
@CarbonGTR and @Nikhilkumar038 - for being solid friends and motivators throughout my struggle
@Catharsis007 - for being best boi
@ArcherTanu - for being extremely helpful
@Raghu varma, @theimpulson, and @npjohnson for their work on the LineageOS trees
and a special unnamed best friend who helped me power through the last couple of months.
Sure, I have abandoned my own trees for the time being, but I've learned a lot in this journey. I hope I can respond to the community's needs and requests efficiently and give back to a community that has given me so many memorable moments
Cheers,
Sid

*insert bop cat gif here*

Sid dev peru

:D

More custom ROM arrived thanks for good work I'll try next :good:

New build up!
Changelog:
Build 11th Sept 2020
* Update to Bootleggers v5.2
* Fix DT2W on locked devices
* Correct haptic feedback vibrator intensity
* Fix system sounds bug (ringtone, alarms, notification sounds not playing on speaker)
* Allow device encryption without force encryption (needs testing)
Clean Flash recommended since sources changed, but dirty flash should work too
Edit: had to reupload to SF because I made a mistake the first time, download should be available now

update Bootleggers ROM 5.2, Bluetooth headset is not working

Update incoming!
Changelog:
Build date 16th Sept 2020
* Fix Fingerprint bug
* Re-enable File Based Encryption

PvTuan said:
update Bootleggers ROM 5.2, Bluetooth headset is not working
Click to expand...
Click to collapse
Could you elaborate or provide logs? Me myself and other users have Bluetooth audio working...

Sid127 said:
Could you elaborate or provide logs? Me myself and other users have Bluetooth audio working...
Click to expand...
Click to collapse
tried flash 2 times and bluetooh connected but no sound

PvTuan said:
tried flash 2 times and bluetooh connected but no sound
Click to expand...
Click to collapse
hm yeah, suddenly faced the same issue too... I could release a patched build OR give you the patches to apply them yourself, what would you like?

Sid127 said:
hm yeah, suddenly faced the same issue too... I could release a patched build OR give you the patches to apply them yourself, what would you like?
Click to expand...
Click to collapse
oh thank you, if there is a patch it's great, let everyone use the best rom together, thank you for your work

I'm aware of the BT Audio bug that has surfaced again, but for some reason my build environment isn't including the commit in the build. I don't have enough time these days to spend on building over and over and testing the builds to see if the patch has been included, and so, I'm instructing on how to apply the patch yourself.
Simply download the file attached on this post and place it in /vendor/etc/
Also delete /vendor/etc/audio/audio_policy_configuration.xml
Cheers,
Sid