Appearantly the K3V2 phones can be easily unlocked, no need for B118 or other chinese firmwares anymore!
1. Make sure you have a working adb connection to the PC
2. Boot to fastboot/bootloader either via the command adb reboot bootloader or by restarting the phone and holding down vol down+power for about 10 seconds.
3. Send this command to the phone via adb:
Code:
fastboot oem unlock UUUUUUUUUUUUUUUU
Note: Factory reset may or may not happen, so backup everything just incase, altough it has been reported that it does not happen by local xda users
It has been reported that this method works for unlocking the bootloader and flashing TWRP is successful.
According to huaweiblog.de it has been tested multiple times on P2, P6, and the Ascend Mate and it has always been successful.
source: http://www.huaweiblog.de/allgemein/general-bootloader-unlock-fuer-alle-huawei-phones/
Make it a difference? I mean for most of the Custom ROMs you need to be on Chinese Firmware if I understand everything right?
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
taaeem said:
Make it a difference? I mean for most of the Custom ROMs you need to be on Chinese Firmware if I understand everything right?
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
Click to expand...
Click to collapse
You only need to be in Chinase firmware becouse it's unlocked, and you cant install Custom ROM without phone been unlocked..
taaeem said:
Make it a difference? I mean for most of the Custom ROMs you need to be on Chinese Firmware if I understand everything right?
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
Click to expand...
Click to collapse
As I understand when you flash a chinese rom it will run that command before the installation with the same key, but I may be wrong. Someone should try it and see if they can flash twrp afterwards when they havent been on any chinese firmwares yet.
I would try but I don't want to risk my phone.
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
tauio111 said:
Appearantly the K3V2 phones can be easily unlocked.
1. Boot to fastboot/bootloader
2. run this in adb:
Code:
fastboot oem unlock UUUUUUUUUUUUUUUU
3. Note: Factory reset will happen, so backup everything
source: http://www.huaweiblog.de/allgemein/general-bootloader-unlock-fuer-alle-huawei-phones/
Click to expand...
Click to collapse
Yea, it seems really cool! Much less risky compared to installing B118cn or 120cn! And much less work compared to flashing kitkat beta.
Can anyone confirm if this works?
bokchoi2020 said:
Yea, it seems really cool! Much less risky compared to installing B118cn or 120cn! And much less work compared to flashing kitkat beta.
Can anyone confirm if this works?
Click to expand...
Click to collapse
The lock command does not work for me, but the unlock command seems to work. But I tested it with B125 and already unlocked bootloader. But it seems to work. No error.
Now just someone with locked bootloader should test it.
customromfan said:
The lock command does not work for me, but the unlock command seems to work. But I tested it with B125 and already unlocked bootloader. But it seems to work. No error.
Now just someone with locked bootloader should test it.
Click to expand...
Click to collapse
I just wanted to test that but my phone says its already unlocked, too.
There was a thread here, where I says that the bootloader is unlocked but its encrypted so you can't flash anything.
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
taaeem said:
There was a thread here, where I says that the bootloader is unlocked but its encrypted so you can't flash anything.
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
Click to expand...
Click to collapse
Yes, even "unlocked" the bootloader checks for a Huawei signature and you can't flash anything custom. The question is if this particular unlock gets rid of this check as China Firmwares do.
I think I'm gonna try it this night and report back.
So you can't install TWRP for unlocked firmware?
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
taaeem said:
So you can't install TWRP for unlocked firmware?
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
Click to expand...
Click to collapse
Maybe, incase of the honor 2, this enabled the flashing of boot.img but not the bootloader.img. Dont try to flash twrp to boot partition.
Maybe some things are different on P6, but I'd doubt
tauio111 said:
Maybe, incase of the honor 2, this enabled the flashing of boot.img but not the bootloader.img. Dont try to flash twrp to boot partition.
Maybe some things are different on P6, but I'd doubt
Click to expand...
Click to collapse
Okay than I don't try that, when I can flash a boot.img I could install a custom ROM or?
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
taaeem said:
Okay than I don't try that, when I can flash a boot.img I could install a custom ROM or?
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
Click to expand...
Click to collapse
boot partition holds the kernel
tauio111 said:
boot partition holds the kernel
Click to expand...
Click to collapse
So can I or not?
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
taaeem said:
So can I or not?
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
Click to expand...
Click to collapse
no, if it doesnt unlock the bootloader partition to flashing. But here is the question - does it unlock it or not
tauio111 said:
no, if it doesnt unlock the bootloader partition to flashing. But here is the question - does it unlock it or not
Click to expand...
Click to collapse
Can it brick m phone when it doesn't work? If not I would maybe try.
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
taaeem said:
Can it brick m phone when it doesn't work? If not I would maybe try.
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
Click to expand...
Click to collapse
Well, there are no reports of bricked devices by using this method, but be caucious. It will also do a factory reset, so make a backup or something before running the command
I will make a backup than run the unlock commands and after that I will try do flash TWRP with fastboot.
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
tauio111 said:
Well, there are no reports of bricked devices by using this method, but be caucious. It will also do a factory reset, so make a backup or something before running the command
Click to expand...
Click to collapse
For me it did no factory reset.
Sent from my HUAWEI P6-U06 using xda app-developers app
Hey can anyone tell me how to change the URL in the weather app from weather.com.cn to weather.com ?
Gesendet von meinem P6-U06
Change in the build.prop location from CN to yours.
Sent from my HUAWEI P6-U06 using Tapatalk
taaeem said:
Hey can anyone tell me how to change the URL in the weather app from weather.com.cn to weather.com ?
Gesendet von meinem P6-U06
Click to expand...
Click to collapse
Did u find a solution ?
nARDOs said:
Did u find a solution ?
Click to expand...
Click to collapse
It's solved with the build.prop thing.
Gesendet von meinem P6-U06
taaeem said:
It's solved with the build.prop thing.
Gesendet von meinem P6-U06
Click to expand...
Click to collapse
wich rom are u using ?
I m on B506 and buil.prop didn t work for me. don`t know why.
nARDOs said:
wich rom are u using ?
I m on B506 and buil.prop didn t work for me. don`t know why.
Click to expand...
Click to collapse
Did you reboot your phone after changing it?
Gesendet von meinem P6-U06
taaeem said:
Did you reboot your phone after changing it?
Gesendet von meinem P6-U06
Click to expand...
Click to collapse
I did. I even wiped dalvik cache.
it s still com.cn even if build.prop languege is set on en and region US.
nARDOs said:
I did. I even wiped dalvik cache.
it s still com.cn even if build.prop languege is set on en and region US.
Click to expand...
Click to collapse
Strange I changed it to DE for Germany and it worked.
Gesendet von meinem P6-U06
Hi friends,
has anyone gotten the KK beta internationally via OTA?
I signed up to beta test but unfortunately have not got anything.
If i got the FW, i upload this.
Gesendet von meinem HUAWEI P6-U06
If you are selected to be a beta tester youll receive OTA update..will see till registration closes..
Sent from my LG-P990 using Tapatalk 2
Yes but I have to get faster hoping the FW. The ones that are among the 500, get the beta in any case
Gesendet von meinem HUAWEI P6-U06
Okay...iam in KK international beta.
How can i find the update file after update?
Gesendet von meinem HUAWEI P6-U06
I got 16790poins in Antutu
BB
After flashig dload Dolder are empty. Any beta test user can only flash once. Anybody he has only download without flashig?
I have 14060 points - antutu
Gesendet von meinem HUAWEI P6-U06
Hi,
Anybody know how can i change the status bar settings in this beta?
Gesendet von meinem HUAWEI P6-U06
87insane said:
Hi,
Anybody know how can i change the status bar settings in this beta?
Gesendet von meinem HUAWEI P6-U06
Click to expand...
Click to collapse
Yes. Root the device and install an Xposed Framework module along with Xposed Framework, ofcourse. Choose the desired module.
Thx
In beta i have NO GPS! I dont no why.
Ive restarted my phone but i cant find a satellite. Any idea?
Edit: after clean install with wipe, GPS works but GPS fix need some time.
Gesendet von meinem HUAWEI P6-U06
Hi guys
First off all sorry for my bad englisch...
Im from germany
I have a german acro s and i cant get into the fastboot mode
I've installed all drivers many times, but flashtool says i dont have drivers installed???
When i try it to boot into fastboot my device after 10 seconds in the loading modus for the ltihium ionen akku
Can any1 help me?[emoji24] [emoji24]
Please any1 help me
Gesendet von meinem LT26w mit Tapatalk
Megathelance said:
Please any1 help me
Gesendet von meinem LT26w mit Tapatalk
Click to expand...
Click to collapse
Try connecting USB to different port of your PC while installing drivers.
If still it does not work, then try it on different PC.
Regards,
hitman-xda
Thanks ! Ill try it soon, but whats about my other Problem, the xperia acro loads the Lithium Ionen accu after a few seconds in the USB cabel
Gesendet von meinem LT26w mit Tapatalk
Got it, thanks
Gesendet von meinem LT26w mit Tapatalk
Hello Guys,
id like to root my Phone, but i dont find any options for my Hardware. Can i use the guids for the Normal G8?
thx for the answer
https://forum.xda-developers.com/lg-g8/how-to/rooting-g8s-guide-t4044193
Gesendet von meinem LM-G810 mit Tapatalk
Roger.T said:
https://forum.xda-developers.com/lg-g8/how-to/rooting-g8s-guide-t4044193
Gesendet von meinem LM-G810 mit Tapatalk
Click to expand...
Click to collapse
THX fore help! I have another Problem, at first i have a lot of trouble to boot my phone with adb in bootloader Modus, after that i tried to become my Phone ID. But he dont find my device. I checked the drivers, installed it again an put the LG Software on my PC but it dont works...
How could i get the ID?
Dicornius said:
THX fore help! I have another Problem, at first i have a lot of trouble to boot my phone with adb in bootloader Modus, after that i tried to become my Phone ID. But he dont find my device. I checked the drivers, installed it again an put the LG Software on my PC but it dont works...
How could i get the ID?
Click to expand...
Click to collapse
Have you activated the developer options and there USB-Debugging?
Gesendet von meinem LM-G810 mit Tapatalk
Sure, booth of that.