Develop Bugs

[Q] Bricked Note 2?

First and foremost, thank you for any help and advise at all.
Had 4.3 ota.... Flashed cwm thru odin. Restarted the phone, it will not boot past the "samsung galaxy note 2" screen. Flashed stock rom thru odin, still stuck at the samsung note 2 screen. I can get into download mode with no issues whatsoever. I cannot get into recovery mode, whether stock or cwm. Nothing. Can I flash another 4.3 or 4.4 rom thru odin? I just need my phone working again..... thanks gentlemen

Also, I have tried flashing back to stock with odin, I have tried flashing to and earlier version with odin. Nothing. As stated above, I can get into download mode. I cannot get into recovery of any kind. Also, I have no idea how to enter emergency recovery mode to try and restore with kies...... I am lost and have a paper weight as of now thanks again guys

http://forum.xda-developers.com/showthread.php?t=2581321
This is the only known method so far and it is not working for everyone but at this point I'd say it is your best and only hope.
Did you thank your Developer today?

Thanks.... Tried that but nothing still samsung note 2 screen only...... Downloading newest odin and a 4.3 stock rom, we shall see......

solomon316 said:
Thanks.... Tried that but nothing still samsung note 2 screen only...... Downloading newest odin and a 4.3 stock rom, we shall see......
Click to expand...
Click to collapse
Where I can get those 4.3 stock and odin?

https://mega.co.nz/#!bg4QVLqI!H-nB_jZlsStgzcF4POd432atbOVHwkzrOPIeHQPOQUQ

Ok, guys, finally made some if little progress..... got the phone into kies firmware recovery mode........ now, I'm still waiting for kies to recognize my note 2 been connecting for 5 minutes now...... If it would just see the phone I could do the emergency recover (HOPEFULLY) and waiting.......

And still waiting for kies to connect to my note 2.......

solomon316 said:
And still waiting for kies to connect to my note 2.......
Click to expand...
Click to collapse
It wont connect!! Stop wasting your time.... I've been there.......................

Rooted 4.3 OTA?
solomon316 said:
First and foremost, thank you for any help and advise at all.
Had 4.3 ota.... Flashed cwm thru odin. Restarted the phone, it will not boot past the "samsung galaxy note 2" screen. Flashed stock rom thru odin, still stuck at the samsung note 2 screen. I can get into download mode with no issues whatsoever. I cannot get into recovery mode, whether stock or cwm. Nothing. Can I flash another 4.3 or 4.4 rom thru odin? I just need my phone working again..... thanks gentlemen
Click to expand...
Click to collapse
Was your 4.3 OTA rooted before you flashed CWM?

I'm having similar issues. Stuck on the Note II screen, and no recovery. I have only ever had stock recovery. I can get into download mode, but ven after using Odin to get back to stock, I have the same issue. I assume this has something to do with the boot loader. Does anyone have a fix for this?

Use Kies to emergency recover back to stock 4.1.1.
Steps. (READ ALL BEFORE STARTING)
1.) Downloads Kies onto your pc
2.) Install drivers to pic
3.) Open Kies and go to TOOLS > instal/upgrade firmware.
4.) Kies will ask you for you device model. AT&T = SHE I317. And your serial number. Located behind the battery.
5.) Hit start in Kies it will down load the stock firmware to your PC. Follow the instructions.
6.) It will eventually ask you to put your phone in download mode and connect it to the pc. Do this.
7.) Don't touch it. It is going to take about 10-20 min depending on your Internet speed and your computer.
When it is complete your phone will be back to stock. The same it was the day you pulled it out of the box.
***I would also make sure you back up any data on your phone because it will delete the sd card. It is also wise to remove any external storage sd.
****when finished you can re root using cf auto root or take the OTA update to get you back to 4.3.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app

ShrekOpher said:
Use Kies to emergency recover back to stock 4.1.1.
Steps. (READ ALL BEFORE STARTING)
1.) Downloads Kies onto your pc
2.) Install drivers to pic
3.) Open Kies and go to TOOLS > instal/upgrade firmware.
4.) Kies will ask you for you device model. AT&T = SHE I317. And your serial number. Located behind the battery.
5.) Hit start in Kies it will down load the stock firmware to your PC. Follow the instructions.
6.) It will eventually ask you to put your phone in download mode and connect it to the pc. Do this.
7.) Don't touch it. It is going to take about 10-20 min depending on your Internet speed and your computer.
When it is complete your phone will be back to stock. The same it was the day you pulled it out of the box.
***I would also make sure you back up any data on your phone because it will delete the sd card. It is also wise to remove any external storage sd.
****when finished you can re root using cf auto root or take the OTA update to get you back to 4.3.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
Kies doesnt work. It does the whole process and then fails with an error message and put the phone in emergency recovery mode but does not give you a recovery code.

What is the error you get in Kies?
If you are using Kies correctly it should work. It is designed to completely restore your phone.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app

ShrekOpher said:
Use Kies to emergency recover back to stock 4.1.1.
Steps. (READ ALL BEFORE STARTING)
1.) Downloads Kies onto your pc
2.) Install drivers to pic
3.) Open Kies and go to TOOLS > instal/upgrade firmware.
4.) Kies will ask you for you device model. AT&T = SHE I317. And your serial number. Located behind the battery.
5.) Hit start in Kies it will down load the stock firmware to your PC. Follow the instructions.
6.) It will eventually ask you to put your phone in download mode and connect it to the pc. Do this.
7.) Don't touch it. It is going to take about 10-20 min depending on your Internet speed and your computer.
When it is complete your phone will be back to stock. The same it was the day you pulled it out of the box.
***I would also make sure you back up any data on your phone because it will delete the sd card. It is also wise to remove any external storage sd.
****when finished you can re root using cf auto root or take the OTA update to get you back to 4.3.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
It does not take my phone model number "sgh i317".
---------- Post added at 10:29 AM ---------- Previous post was at 09:34 AM ----------
ShrekOpher said:
Use Kies to emergency recover back to stock 4.1.1.
Steps. (READ ALL BEFORE STARTING)
1.) Downloads Kies onto your pc
2.) Install drivers to pic
3.) Open Kies and go to TOOLS > instal/upgrade firmware.
4.) Kies will ask you for you device model. AT&T = SHE I317. And your serial number. Located behind the battery.
5.) Hit start in Kies it will down load the stock firmware to your PC. Follow the instructions.
6.) It will eventually ask you to put your phone in download mode and connect it to the pc. Do this.
7.) Don't touch it. It is going to take about 10-20 min depending on your Internet speed and your computer.
When it is complete your phone will be back to stock. The same it was the day you pulled it out of the box.
***I would also make sure you back up any data on your phone because it will delete the sd card. It is also wise to remove any external storage sd.
****when finished you can re root using cf auto root or take the OTA update to get you back to 4.3.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
It gives you an error! It does not say what kind of error, it said, just an error, and contact Samsung support.
Yet, on phone display I am getting : "Unsupported Version" in red message.
So, I am guessing - THIS is a good way to recover your Note2 IF, and only IF your phone is NOT bricked.
Damn, I am very close to smash that thing into the wall.................
Lets arrange the facts, BC there must be the way out................
One CAN get back from 4.3 (or even from 4.4) to 4.1.1. I know i did.
All was fine until receiving first OTA update to 4.1.2
And this is when one got stock in white letters Galaxy Note II screen............any ideas why?

fuzio1963 said:
It does not take my phone model number "sgh i317".
---------- Post added at 10:29 AM ---------- Previous post was at 09:34 AM ----------
It gives you an error! It does not say what kind of error, it said, just an error, and contact Samsung support.
Yet, on phone display I am getting : "Unsupported Version" in red message.
So, I am guessing - THIS is a good way to recover your Note2 IF, and only IF your phone is NOT bricked.
Damn, I am very close to smash that thing into the wall.................
Lets arrange the facts, BC there must be the way out................
One CAN get back from 4.3 (or even from 4.4) to 4.1.1. I know i did.
All was fine until receiving first OTA update to 4.1.2
And this is when one got stock in white letters Galaxy Note II screen............any ideas why?
Click to expand...
Click to collapse
OKAY GUYS!!!! SOLUTION FOUND!!!!
Just un-zip, and install this http://www.androidfilehost.com/?fid=23212708291677024 in ODIN 3.07
Finally, it worked for me!!!!

fuzio1963 said:
OKAY GUYS!!!! SOLUTION FOUND!!!!
Just un-zip, and install this http://www.androidfilehost.com/?fid=23212708291677024 in ODIN 3.07
Finally, it worked for me!!!!
Click to expand...
Click to collapse
I can confirm this worked. Phone is no longer bricked.

fuzio1963 said:
OKAY GUYS!!!! SOLUTION FOUND!!!!
Just un-zip, and install this http://www.androidfilehost.com/?fid=23212708291677024 in ODIN 3.07
Finally, it worked for me!!!!
Click to expand...
Click to collapse
Not sure how you came to try this but great job. I did massive testing yesterday with Zen trying to get from stock LJ2 ODIN, all the way to the 4.3 update.
I never thought it was possible, but encountered the same problem of not being able to get to recovery. Regardless of what I tried.
Luckily I remembered you and found this.
That was crazy, I thought my phone was toast. Thanks again.

Had a similar experience recently moving to jedi master x2
After reboot I was left staring at the galaxy note 2 screen for an hour.
Nothing I would typically have done worked including a restore of my nandroid.
So i went back to basics.
Used Odin 2.85
Switched to CWM from TWRP(i prefer and am back on TWRP)
From CWM I was able to finally install the rom and get to swipe screen.
I was still anxious on boot and it took a while though.
good luck

You rocked. This worked absolutely fine. Where did you find this file.
dicksteele said:
Not sure how you came to try this but great job. I did massive testing yesterday with Zen trying to get from stock LJ2 ODIN, all the way to the 4.3 update.
I never thought it was possible, but encountered the same problem of not being able to get to recovery. Regardless of what I tried.
Luckily I remembered you and found this.
That was crazy, I thought my phone was toast. Thanks again.
Click to expand...
Click to collapse
This worked absolutely fine. Even I was stuck on Samsung logo and dint know wat to do I just flashed this file via odin 3.07 and my phone started like a charm. Thanks a lot

[Q] I-317 Note 2 Can't boot into recovery mode, stuck on Samsung Logo

Problem: Stuck on white/black screen, can't boot into recovery, able to boot into download mode
I recently returned my phone to stock following the return to stock tread (4.1.1), however, my first OTA update from ATT (4.1.2), after the install finished it stuck at boot up screen. And I can't get into recovery screen at all no matter what I try.
Tried to flash TW recovery
Tried to flash CWM recovery
no success, any help?
Edit, I noted whenever my phone is off, when plug in the charger/usb cable, my phone automatically goes into the black/white letter screen. WITHOUT touching any button what so ever.
On download screen
Current Binary: Custom
Systems Status: Custom

Use Kies to emergency recover back to stock 4.1.1.
Steps. (READ ALL BEFORE STARTING)
1.) Downloads Kies onto your pc
2.) Install drivers to pic
3.) Open Kies and go to TOOLS > instal/upgrade firmware.
4.) Kies will ask you for you device model. AT&T = SHE I317. And your serial number. Located behind the battery.
5.) Hit start in Kies it will down load the stock firmware to your PC. Follow the instructions.
6.) It will eventually ask you to put your phone in download mode and connect it to the pc. Do this.
7.) Don't touch it. It is going to take about 10-20 min depending on your Internet speed and your computer.
When it is complete your phone will be back to stock. The same it was the day you pulled it out of the box.
***I would also make sure you back up any data on your phone because it will delete the sd card. It is also wise to remove any external storage sd.
****when finished you can re root using cf auto root or take the OTA update to get you back to 4.3.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Sent from my SAMSUNG-SGH-I317 using xda app-developers app

kelpqq said:
Problem: Stuck on white/black screen, can't boot into recovery, able to boot into download mode
I recently returned my phone to stock following the return to stock tread (4.1.1), however, my first OTA update from ATT (4.1.2), after the install finished it stuck at boot up screen. And I can't get into recovery screen at all no matter what I try.
Tried to flash TW recovery
Tried to flash CWM recovery
no success, any help?
Edit, I noted whenever my phone is off, when plug in the charger/usb cable, my phone automatically goes into the black/white letter screen. WITHOUT touching any button what so ever.
On download screen
Current Binary: Custom
Systems Status: Custom
Click to expand...
Click to collapse
Did you get it working? Mine has the same issue. Sucks...

Kies does not work with a Note II.

hey! any solution, ???

KIes 3
I downloaded the newest version of Kies, it is called Kies 3. My note 2 connects to it easily. I have not had to try the emergency repair. Here is the link for it. Hope it helps.
http://www.samsung.com/sg/support/usefulsoftware/KIES/JSP

I used the above mention Kies procedure to return my phone to working condition. I was also stuck on the Samsung logo for hours. I tried flashing several backups in Clockwork mod several times for several hours. My sd card would not mount as well. I could use wifi but no phone service. During the Kies process it prompted me to do an emergency repair which I did but this was only after doing a factory reset, and cache wipe, and dalvik cache wipe. I followed the steps by ShrekOpher and my phone was returned to 4.1.2 stock. My new problem is that I made the mistake of updating to 4.3 OTA and now have a locked bootloader. Everything works perfectly except now I'm not rooted. Screen Mirroring works perfect which was the main reason for my misadventure. I'm wondering if I root manually will my screen mirroring be disabled like it was when I was on the unofficial 4.3?

Screen mirroring checks for rooted status and won't run if detected.
See bottom of post #2 here for a link to a solution to that...
http://forum.xda-developers.com/showthread.php?t=2589891
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app

reply
cameron213 said:
Did you get it working? Mine has the same issue. Sucks...
Click to expand...
Click to collapse
I had the same issue. I pulled my sd card and battery for 30 seconds. Then it went into recovery with vol + home and power. Hope this helps someone.

hatgirl223 said:
I downloaded the newest version of Kies, it is called Kies 3. My note 2 connects to it easily. I have not had to try the emergency repair. Here is the link for it. Hope it helps.
Good morning friend, how I stay KIES fixed the error? as I try to do the tutorial provided here in the forum, but by placing the model and S / N, Kies indicated that I had no copy to restore. Just yesterday I stay in this mode.
Can you help me?
Click to expand...
Click to collapse

[Q] Got Stuck on Download Mode. Need Help 4.3

Hello there,
I've previously used Odin to install several versions on several phones, so at leas I know some very basics, like, using Odin and what not.
Here's my problem. I rooted my 4.3, it gave me some trouble, and the main reason I wanted it rooted was to get backups for my apps. Turns out I can back up my data with carbon "rooted-unrooted" so I decided to ditch the root since it was giving me some hassle with the security update thing and titanium was not working properly. "had to do some other stuff and I was kind of tired.
Turns out I tried to install my other official firmware I had "4.1". Sadly, upon using Odin with it, it now says that I'm trying to install an unsupported version and won't proceed... I'm stuck in here because I cannot restart by pressing up+power because it gives me an error and says I need to restart in download mode.
I was wondering if installing a fresh copy of 4.3 would fix this. Yet I've been unable to find any actual official files... yeah... I know this sounds pathetic, but... I've been herer for an hour + and have not found either a solution or the original 4.3 file or whichever file I would need for this.
Decided to turn unto this community which has helped me a lot in the past to solve all my previous issues.
So... How do I install a fresh 4.3 or how do I get out of this mess? My cell phone doesn't turn on, it just tells me the following:
Firmware Upgrade Encountered an issue. Please select recovery mode in Kies & try again.
I had 4.3 installed with all the security crap on it, so when I go to download mode and install 4.1, it says that the verison is unsopported...
Thank you all in advance.

Download Mr Robinson's 4.3 rooted ROM from here.
Flash it via ODIN and you should be good to go.
Your phone is already on 4.3 bootloader and it is not letting you downgrade to any version below it.

SGH-I747 AT&T Softbricked Maybe Hard

Hi guys I just bought a SGH-I747 AT&T and the issue with it is it goes into Download mode just fine, works with Odin 3.7 loads a stock rom and then it sais reset but the phone doesn't reset just goes to black screen and then Odin sais Pass. I press the power button and Samsung appers and vibrates and goes back to black. When I try Recovery mode it show the blue writing on the left upper and the Samsung and then it goes to black screen. I put two different stock roms and same story. Kies won't recognize it and I installed recovery-clockwork-touch-6.0.4.3-d2att.tar to try to get into recovery mode and of course no luck. Don't know the history on this, so if anyone could help I would really appreciate it. Thanks in advance.

gica69 said:
Hi guys I just bought a SGH-I747 AT&T and the issue with it is it goes into Download mode just fine, works with Odin 3.7 loads a stock rom and then it sais reset but the phone doesn't reset just goes to black screen and then Odin sais Pass. I press the power button and Samsung appers and vibrates and goes back to black. When I try Recovery mode it show the blue writing on the left upper and the Samsung and then it goes to black screen. I put two different stock roms and same story. Kies won't recognize it and I installed recovery-clockwork-touch-6.0.4.3-d2att.tar to try to get into recovery mode and of course no luck. Don't know the history on this, so if anyone could help I would really appreciate it. Thanks in advance.
Click to expand...
Click to collapse
I found out that the phone had 4.1.1 on it and the guy tried to flash 4.2.2 and upon doing the odin mode flashing odin gave Firmware upgrade encountered an issue Please select recovery mode in Kies & try again So these are just some helpful facts for anyone who has gone through it. Thanks in advance for any help

gica69 said:
I found out that the phone had 4.11 on it and the guy tried to flash 4.22 and upon doing the odin mode flashing odin gave Firmware upgrade encountered an issue Please select recovery mode in Kies & try again So these are just some helpful facts for anyone who has gone through it. Thanks in advance for any help
Click to expand...
Click to collapse
What firmware were you trying to flash via Odin and are you sure the seller didn't previously flash (or try to flash) the 4.3 on it? If it wasn't higher than 4.3, then you may try recovery via Kies as follows ....
Install and launch Samsung Kies on your PC (not Kies 3). Open the Tools menu and select Firmware Upgrade and Initialization
Do not connect your phone to your PC yet. Remove the battery cover and record device info written in the battery compartment
In Kies, enter your phone model (SGH-I747)
Enter the phone serial number and click OK to all the security questions. Follow all the instructions on Kies
Connect the phone when prompted and follow the rest of the instructions
Wait for firmware upgrade to complete
Good luck!
If this doesn't work, then you may try flashing the 4.1.1 stock image via Odin. Look for the correct stock image via the following thread ...
http://forum.xda-developers.com/showthread.php?t=1739426
The one you want for Samsung Galaxy S3 AT&T (4.1.1) is I747UCDLK3
PLEASE don't try any of the above if you were already on the 4.3 bootloader as things will only get worse.

Larry2999 said:
What firmware were you trying to flash via Odin and are you sure the seller didn't previously flash (or try to flash) the 4.3 on it? If it wasn't higher than 4.3, then you may try recovery via Kies as follows ....
Install and launch Samsung Kies on your PC (not Kies 3). Open the Tools menu and select Firmware Upgrade and Initialization
Do not connect your phone to your PC yet. Remove the battery cover and record device info written in the battery compartment
In Kies, enter your phone model (SGH-I747)
Enter the phone serial number and click OK to all the security questions. Follow all the instructions on Kies
Connect the phone when prompted and follow the rest of the instructions
Wait for firmware upgrade to complete
Good luck!
If this doesn't work, then you may try flashing the 4.1.1 stock image via Odin. Look for the correct stock image via the following thread ...
http://forum.xda-developers.com/showthread.php?t=1739426
The one you want for Samsung Galaxy S3 AT&T (4.1.1) is I747UCDLK3PLEASE don't try any of the above if you were already on the 4.3 bootloader as things will only get worse.
Click to expand...
Click to collapse
I have already tried the I747UCDLK3 not from the link you gave me though. I did notice that the one you mentioned is a rooted stock do you think I should still do it? The rom flashes fine no errors in Odin but when it sais RESET the phone turns off the download mode and vibrates once then goes black then later Odin sais Pass but I cannot start it it just bootloops and vibrates and it stays that way As far as the Kies procedure you gave me don't I have to be in recovery mode for it to see the phone? I cannot get to that mode just download mode. Let me know thanks for your help

gica69 said:
I have already tried the I747UCDLK3 not from the link you gave me though. I did notice that the one you mentioned is a rooted stock do you think I should still do it? The rom flashes fine no errors in Odin but when it sais RESET the phone turns off the download mode and vibrates once then goes black then later Odin sais Pass but I cannot start it it just bootloops and vibrates and it stays that way As far as the Kies procedure you gave me don't I have to be in recovery mode for it to see the phone? I cannot get to that mode just download mode. Let me know thanks for your help
Click to expand...
Click to collapse
If you were successful in flashing via Odin, I would have suggested you try doing a hard wipe/reset in recovery. However, you said you can't get to recovery mode so this may not work. What happens when you try booting into recovery mode?
For Kies, you wouldn't have to be in recovery mode for the firmware restore to happen. Normally, you would have to connect your (powered-on) phone to your PC for it to be recognized by Kies. However, as you can't power on, we are forcing Kies to prepare the specific required firmware for your device by manually entering in the device information. Thus, when the phone is connected, you have firmware ready to make it work.
It may also be that the firmware you downloaded and flashed via Odin may not be the correct or full version. There are so many sources of "stock" firmware these days that one can never be too sure. You may go to Sammobile.com to download the stock firmware and compare the size of the extracted file to the one you used. The odin flashable tar.md5 file should be about 1.1Gb in size.

Larry2999 said:
If you were successful in flashing via Odin, I would have suggested you try doing a hard wipe/reset in recovery. However, you said you can't get to recovery mode so this may not work. What happens when you try booting into recovery mode?
For Kies, you wouldn't have to be in recovery mode for the firmware restore to happen. Normally, you would have to connect your (powered-on) phone to your PC for it to be recognized by Kies. However, as you can't power on, we are forcing Kies to prepare the specific required firmware for your device by manually entering in the device information. Thus, when the phone is connected, you have firmware ready to make it work.
It may also be that the firmware you downloaded and flashed via Odin may not be the correct or full version. There are so many sources of "stock" firmware these days that one can never be too sure. You may go to Sammobile.com to download the stock firmware and compare the size of the extracted file to the one you used. The odin flashable tar.md5 file should be about 1.1Gb in size.
Click to expand...
Click to collapse
When I go in recovery it shows blue writing in left upper corner and Samsung logo and then black screen. I think I did use the Sammobile firmware at 1.1. My clock in download mode shows 6. I don't think that would affect it though. Could it be that Odin doesn't really write the firmware that's why flashing doesn't change anything? I don't think the jig would do anything maybe sending it for a jtag reflash is the trick.
I am lost for now. If you guys can think of anything new let me know and thanks again.

gica69 said:
When I go in recovery it shows blue writing in left upper corner and Samsung logo and then black screen. I think I did use the Sammobile firmware at 1.1. My clock in download mode shows 6. I don't think that would affect it though. Could it be that Odin doesn't really write the firmware that's why flashing doesn't change anything? I don't think the jig would do anything maybe sending it for a jtag reflash is the trick.
I am lost for now. If you guys can think of anything new let me know and thanks again.
Click to expand...
Click to collapse
You didn't mention if you tried the Kies option. I had a similar problem once when upgrade to 4.1.1 via Kies failed during the process and that was how I was able to recover. However, since you bought this from the secondary market, there is no way of telling for certain what the previous owner did wrong which would have been useful for recovery options.
One of the nice things about Odin is that you usually know the results immediately. If it says Pass, therefore, that's likely what it means. So Odin did flash something. But what did it flash? The counter you saw in download mode shows how many custom system installations there have been and 6 does show there has been some previous heavy tinkering with the phone. As you are still able to get into download modes, I would suggest you try flashing custom recovery (TWRP or CWM) via Odin. If this works and you are able to get into recovery mode, you may then try doing a hard wipe/reset via recovery. You may also try flashing the other (rooted) 4.1.1 file via Odin. At this stage, you really have nothing to lose in trying all options. I guess if you can get into recovery mode, the problem is almost solved as this leaves plenty of options.
A jig wouldn't help as that only gets you to download mode which, for now, you don't have a problem with. JTag should always be a last resort option only. Let me know how far it goes and good luck!

When flashing in Odin, did you check auto reboot? If you did, try flashing again but uncheck auto-reboot. When you see Reset in the status windows, disconnect the USB cable, pull out the battery, wait a few seconds until the phone completely shuts down, put back in the battery, get into recovery, wipe cache, do a factory reset, and reboot.

audit13 said:
When flashing in Odin, did you check auto reboot? If you did, try flashing again but uncheck auto-reboot. When you see Reset in the status windows, disconnect the USB cable, pull out the battery, wait a few seconds until the phone completely shuts down, put back in the battery, get into recovery, wipe cache, do a factory reset, and reboot.
Click to expand...
Click to collapse
This damn phone is starting to annoy me. I can still get into download mode but my phone gets usb device not recognized now. I have access to another I747 phone so my question is if I have access to the pit file from that phone can anything be done with the Debrick utility and a SD card with only download mode access? Thanks in advance.

Go into download and let us know what is shown on the screen.

audit13 said:
Go into download and let us know what is shown on the screen.
Click to expand...
Click to collapse
Odin Mode
Product Name: SGH-I747
Custom Binary Downloads: Yes (6 Counts)
Current Binary: Samsung Official
System Status: Official
Qualcomm Secure Boot: Enable
Green Android Icon Downloading...
Do not turn off target!!!

OK I plugged the USB in and out a few times and it allows to write every few tries. Back to my question can I do something in download mode if I have another i747 that I can copy stuff from? I also tried the suggestion to uncheck auto-reset pull the usb cable then the battery and try to go to recovery but it doesn't.Any suggestions are welcomed.

Try flashing a stock 4.1.1 rom from sammobile using Odin. Do not check auto reboot. When you see reset in the status window, disconnect the usb cable, pull the battery, replace the battery, boot into recovery, and wipe. I have done this numerous times on my i747m after flashing custom ROMs.

audit13 said:
Try flashing a stock 4.1.1 rom from sammobile using Odin. Do not check auto reboot. When you see reset in the status window, disconnect the usb cable, pull the battery, replace the battery, boot into recovery, and wipe. I have done this numerous times on my i747m after flashing custom ROMs.
Click to expand...
Click to collapse
I will try it again I think I already did but when I put the battery back and click the Vol+ Home Power I get the blue writing and then black screen. Should I wait like 10 min on the black screen or it should be quick. Thanks

Keep holding the buttons until the blue writing disappears and the green android appears with the green progress bar.

audit13 said:
Keep holding the buttons until the blue writing disappears and the green android appears with the green progress bar.
Click to expand...
Click to collapse
Is there an unbrick.img for 4.1.1 or 4.1.2 I noticed that there are files for 4.3 that allow you to go in recovery and erase stuff reinstall. Let me know cause I sure couldn't find it.

If u can get it into download mode u are never ever hard bricked my friend...take it from a guy who had to dust off his old galaxy sll last weekend & still can't get into d/l mode on my s3 after a week & even with a jig lol
Sent from my SGH-T989 using xda app-developers app

gica69 said:
Is there an unbrick.img for 4.1.1 or 4.1.2 I noticed that there are files for 4.3 that allow you to go in recovery and erase stuff reinstall. Let me know cause I sure couldn't find it.
Click to expand...
Click to collapse
The unbricking image only helps you get into download mode from where you can work your way up the rest of the food chain. As you can already get into download mode without difficulties, I doubt if that's what you really need. You are also able to flash ROMs successfully in download mode via Odin so you've gone far up on the food chain already. Perhaps you are not doing the recovery thing correctly enough. Like Audit said, you need to continue holding down the Volume Up and Menu buttons whilst releasing the Power button after you see the first flash until the recovery menu appears and then do a hard wipe/reset.
Perhaps you could also try flashing TWRP via Odin if CWM isn't working.

Larry2999 said:
The unbricking image only helps you get into download mode from where you can work your way up the rest of the food chain. As you can already get into download mode without difficulties, I doubt if that's what you really need. You are also able to flash ROMs successfully in download mode via Odin so you've gone far up on the food chain already. Perhaps you are not doing the recovery thing correctly enough. Like Audit said, you need to continue holding down the Volume Up and Menu buttons whilst releasing the Power button after you see the first flash until the recovery menu appears and then do a hard wipe/reset.
Perhaps you could also try flashing TWRP via Odin if CWM isn't working.
Click to expand...
Click to collapse
I already tried holding the Home and Volume up buttons for 4-5 minutes at which point my fingers got a bit tired. The reason I wanted the unbrick.img is that I am now having issues with the computer recognizing the device in usb. I plugged and unplugged so many times that it no longer works that way so I wanted to do it via sd card. The unbrick.img gets you in recovery mode and download mode as it allows you to boot from the card not from the internal HD. But the only ones I have seen are for the 4.3 issues. And I tried It but did not put my device in recovery.

gica69 said:
I already tried holding the Home and Volume up buttons for 4-5 minutes at which point my fingers got a bit tired. The reason I wanted the unbrick.img is that I am now having issues with the computer recognizing the device in usb. I plugged and unplugged so many times that it no longer works that way so I wanted to do it via sd card. The unbrick.img gets you in recovery mode and download mode as it allows you to boot from the card not from the internal HD. But the only ones I have seen are for the 4.3 issues. And I tried It but did not put my device in recovery.
Click to expand...
Click to collapse
I couldn't find one either although you may be able to create yours using the command line posted in the thread below ...
http://forum.xda-developers.com/showthread.php?t=2549068
You may also try using a jig to get back into download mode. Have you, however, considered exercising any buyer protection options you have on the phone since, it would appear, the guy sold you a lemon?

SG4 in 4.4.4 stock ROM is looping on grey battery icon.

So this happened about a month ago. The battery drained and when I left it charging I noticed that it was vibrating and showing the grey battery icon and this loops. I have the CMR Recovery v6.0.4.7 and can only access it when connected to the wall charger. I have left it a while on CMR while connected to the wall to see if it need charging but it just does the same thing when trying to boot. I have wiped cache, dalvik cache and selected the "Fix root" option before rebooting and nothing. I have not tried to flash a ROM in fear of bricking it. I made it as far as the "Upgrading Apps" window before fully booting but it turned off. I searched a bit and some people blame a faulty USB Port and/or power switch. I have no problem in buying and replacing the USB port and the power switch, though I don't have soldering tools for the power switch. But since I don't know what the issue is exactly I haven't rushed to buy the USB port replacement. So, the question is: is it a software or hardware problem and can it be fixed? I hope this is a software issue so it can be easier to solve.

I suggest putting the phone into download mode and see if Odin recognises the phone. If it does, I would flash the latest stock rom.

audit13 said:
I suggest putting the phone into download mode and see if Odin recognises the phone. If it does, I would flash the latest stock rom.
Click to expand...
Click to collapse
Odin does recognize the phone on Download Mode. So, what you are saying is to flash the latest non-rooted ROM (OFW), correct? Like the tar files found in sites like SamMobile? That won't remove my root nor custom recovery, right? Kinda of a newb question even though I kinda know the answer, but I just want to make sure.

Flashing a stock ROM will always remove root and twrp.

audit13 said:
Flashing a stock ROM will always remove root and twrp.
Click to expand...
Click to collapse
Hi. So, I flashed the latest stock ROM that is available on SamMobile and it fails in Odin. Now when I plug the phone without going to Download Mode its says something about recovery mode in Kies and and a firmware upgrade issue. What is happening? Thank for your responses, btw.
What I downloaded was a zip titled "SGH-M919-TMB-M919UVUAMDL-1366964131" and inside is and tar.md5 file called "M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar". There on the same folder as Odin.

What error message was displayed in the Odin log?
Post the entire Odin log if possible. This will help to determine the issue.
You confirmed that the phone is an sgh-m919 in download mode?
Even though you turn on the phone and see the message"...firmware upgrade encountered an error...", Odin can still be usedto flash a stock ROM as if the phone was in download mode.
The MDL firmware is too old. Try flashing the latest ROM.