Hi there,
I know this has been asked and answered a million times, but I cannot find my MSI number anywhre in this phone.
The main reason is whe I goto - ##DATA#, hit edit, there is no screen that pops up to have me enter a wrong MSI number, so I can't fetch the real one with any of the apps. I can't enter the wrong MSI number anywhere in the phone.
My device is rooted, and I am trying to flash it to cricket.
Any idea if here is another place to enter the MSI number so it comes back invalid so I can use the programs to get the real one?
Any other way to get one? Do you have any idea why when I goto the data menu, theMSI # screen won't come up?
Thanks
Also,
Is there just a step by step guide where I can look to flash Cricket to a VZW Note 2? I'm trying with a few but the MSI is not working with DFW program.
Any special steps to flash to Cricket from a Verizon phone?
Related
Buy HTC Vogue Clean ESN CDMA Set to eaby.com . & how to Use This Phone In India in CDMA Network. pls tell
I m read another Indian forum. HTC 6800/6900 convert to tata CDMA
here is detail
SID, NID, Primay Channer A & B, Secondary Channel A & B loaded Nam 1 & Nam 2 PRL, SPC = 000000
I got all above Parameter from Tata Customer Care and they told any Foreign ESN Handset can work if you are able to change the above Parameters, After that I Get an GSK (Getting Started Kit) of Tata which have 14 Digit Activation Number, then Dialed *228 and followed the Instruction, After 2 Hours (Tipical 10 Minutes they say) Received a SMS to Restart the Phone. Voila my HTC Mogul is Working on TATA
Will load my QPST .qct file (Ready made Setting for TATA) so every buddy can easily Activate Mogul on TATA
Everybody now Welcome to World of Tata Indicom
( Attached TATA.rar contains Nam1 PRL, Nam2 PRL, and Ready made QCN file for QPST Service Programming, also have GetSPC [ Run in PPC6800 / Mogul Type the ESN in Capital and get the Service Programming Code] )
Pls Help me
Sounds interesting but I'm just wondering
OK.... can u explore more on that.
How does one go about creating/editing the PRL settings contained here if they want to use this thing on a different network than Tata?
thx
This method work on Cricket in USA and in TATA in India
Just follow the Process and Activate using *228 Loading TATA Prl is needed or else it will not catch TATA Tower range.
Go on and take it into TATA
I already have activated so many Phones
Both Cricket and TATA accept non Allocated ESN and Activate the OTA and INsert the new ESN against users Services, Here in India Reliance dont activate any phone which ESN is not pre Registered in Reliance Network
I was wondering if this will solve my issue. I have bought a touch with a bad ESN and is unable to put it on my account. Will this clear the ESN?
I used this ..so easy
so if you activated your phone for india service, would you be able to use it in the United States?
--James
I did this for my Sprint Touch. I am still using it in the USA but my phone has been modified to support other carriers with no problem.
The steps are simple:
Here is what you need to do:
1. Download GetSPC(attached below)
2. Unzip to desktop
3. Turn off phone and remove battery.
4. Write down your HEX ESN
5. Power your device back on
6. Connect via ActiveSync or WMDC
7. Copy entire folder to main memory on device.
8. Run GetSPC.exe
9. In the top box type in your HEX ESN(make sure caps is on)
10. Click generate or whatever the button is named
11. The resulting number should be a 6 digit number, your MSL, write it down.
12. Search for, download and install Qualcomm's QPST tool.(not freeware)
THE FOLLOWING STEPS ARE VERY DANGEROUS SO MAKE SURE YOU FOLLOW MY DIRECTIONS EXACTLY.
13. Run QPST Configuration(run as admin if Vista)
14. From the Dialpad, dial ##3424#(##diag#)
15. Connect device to computer via USB(this will install drivers)
16. In QPST Configuration, click ports.
17. Continue to add ports until the QPST Configuration detects your phone
18. Under active phones it should display your phone.
19. Click Start Clients/Service Programming
20. Select phone and click ok.
DO NOT LEAVE FIRST TAB, THE SETTINGS TAB. THIS IS THE ONLY TAB WE WILL NEED TO CHANGE ANY SETTINGS
21. Under the settings tab, click Read from phone.
22. Input your MSL you got from GetSPC earlier.
23. Under codes where it says Service Programming, change this to 000000
24. Click Write to Phone
25. Wait 1 minute
26. Close Qualcomm QPST one window at a time.
27. Disconnect the USB cable from your device
28. Perform Soft reset once
29. Test new MSL(##000000#)
30. If new code does not go through, hard reset.
31. Depending on what device you have, follow the necessary steps to unlock your phone so you can flash a new ROM to it.
32. Install OEM ROM from carrier of choice or build your own custom ROM using the new carrier's information.
33. Follow instructions to flash new OS to device.
34. Call service provider and do some sweet talking to get them to activate the phone on their network. You may need to do some serious sweet talking because Sprint ESNs are not in Verizon's database and vice versa. This goes for all CDMA carriers.
Good luck.
dharvey4651 said:
I did this for my Sprint Touch. I am still using it in the USA but my phone has been modified to support other carriers with no carriers.
Good luck.
Click to expand...
Click to collapse
are u then able to have both NAM1 & NAM2 on the phone?
NAM
You have to enable dual NAMs through the registry. And use QPST or CDMA Workshop to set them up.
Thanks a million time to Shadomite
He had Cracked and changed the ESN
I have POsted the Simplified Method Just have a look
http://www.mobile-files.com/forum/showpost.php?p=355534&postcount=82
Quick question. Is there any chance of doing something similar to a Verizon World Edition Blackberry? I live in Ghana and i have had a few of these on my table in the last few months. Any ideas?
''Originally Posted by dharvey4651''
32. Install OEM ROM from carrier of choice or build your own custom ROM using the new carrier's information.''
What information i need from my carrier to build my own rom and how can i make it. Is there a way to build a rom and make a CDMA phone to work in Europe?
I have an HTC TOUCH CDMA ver in Greece!
Help..
Having HTC P3050
you have given the file i have downloaded it but now how to use it and activate on tata can u help me
Need English Viva ROM for Vogue (MP6900SP)
Thank you for this great post. I followed the instructions without bricking my phone. I looked at the 'simpler' one linked to here, but found the one on this thread much easier to follow and use.
Now all I need is the ROM for Viva (North America or Carribbean). Where can I find this? Thanks,
WMT
Hey Hetal
can't find your post on mobile-files.com. Is there any other link.
Will this method work on reliance network too???
Thanks
puneet_july30 said:
Hey Hetal
can't find your post on mobile-files.com. Is there any other link.
Will this method work on reliance network too???
Thanks
Click to expand...
Click to collapse
Mobile-Files was taken down a few months ago.
dharvey4651 said:
I did this for my Sprint Touch. I am still using it in the USA but my phone has been modified to support other carriers with no problem.
The steps are simple:
Here is what you need to do:
1. Download GetSPC(attached below)
2. Unzip to desktop
3. Turn off phone and remove battery.
4. Write down your HEX ESN
5. Power your device back on
6. Connect via ActiveSync or WMDC
7. Copy entire folder to main memory on device.
8. Run GetSPC.exe
9. In the top box type in your HEX ESN(make sure caps is on)
10. Click generate or whatever the button is named
11. The resulting number should be a 6 digit number, your MSL, write it down.
12. Search for, download and install Qualcomm's QPST tool.(not freeware)
THE FOLLOWING STEPS ARE VERY DANGEROUS SO MAKE SURE YOU FOLLOW MY DIRECTIONS EXACTLY.
13. Run QPST Configuration(run as admin if Vista)
14. From the Dialpad, dial ##3424#(##diag#)
15. Connect device to computer via USB(this will install drivers)
16. In QPST Configuration, click ports.
17. Continue to add ports until the QPST Configuration detects your phone
18. Under active phones it should display your phone.
19. Click Start Clients/Service Programming
20. Select phone and click ok.
DO NOT LEAVE FIRST TAB, THE SETTINGS TAB. THIS IS THE ONLY TAB WE WILL NEED TO CHANGE ANY SETTINGS
21. Under the settings tab, click Read from phone.
22. Input your MSL you got from GetSPC earlier.
23. Under codes where it says Service Programming, change this to 000000
24. Click Write to Phone
25. Wait 1 minute
26. Close Qualcomm QPST one window at a time.
27. Disconnect the USB cable from your device
28. Perform Soft reset once
29. Test new MSL(##000000#)
30. If new code does not go through, hard reset.
31. Depending on what device you have, follow the necessary steps to unlock your phone so you can flash a new ROM to it.
32. Install OEM ROM from carrier of choice or build your own custom ROM using the new carrier's information.
33. Follow instructions to flash new OS to device.
34. Call service provider and do some sweet talking to get them to activate the phone on their network. You may need to do some serious sweet talking because Sprint ESNs are not in Verizon's database and vice versa. This goes for all CDMA carriers.
Good luck.
Click to expand...
Click to collapse
Thanks a ton, I have completed all the steps 30, now how can I run the other network on my phone.
Do I have fill all the network details in the QPST Config step..???
that's great thank you man
Thank you. it was more then easy.
Now it works.
help me
How can I use this file for my HTC Hero CDMA? this QCN file giving error.
help me.
Hey guys, I have a Desire CDMA that was on US Cellular. They claim that the ESN has been released from their network. I have rooted the phone with no problems. Page Plus was able to add it to their network fine but it just will not activate. Verizon, of course, is no help either. Should I find a stock 2.1 and re-flash?
I see people selling Page Plus Desires so I'm needing to know what I'm missing. I did get a guy on the phone who told me the phone needed to be "Manually Programmed". I also went to a Page Plus dealer and he gave me a DUH look when I asked him about it.
I have also installed CyanogenMod V7.0.0 RC2 without any problems what so ever... I just need to change the Network to Verizon instead of US Cellular.
[Edit] I have found out that I need to change the SID number, anyone know where to do this?
Any ideas would be very helpful!
TIA!!
[Edit] I have also discovered the *#*#4636#*#* trick but the OEM info at the bottom of the screen is grayed out... I dont know if this is where you change the SID #? The ##PROGRAM trick did not work but I have already flashed the CyanogenMod so maybe that is why this didn't work?
[Edit3] I found this but the ##PROGRAM is not working, is there another number to get into programming?
-Tap the Phone Icon and dial ##7764726 then tap phone icon
-SPC Password is 000000 and tap verify
-select User Activation
-Tap MIN Box and delete existing info and add your MIN *
-Enter MDN as well
-Find SID # and input it here **
-Press Done to save info an return to user activation and then press Home key and phone should reset after programming
so this does work? and do they give you the numbers you need to enter?
Msl reader isnt working for me gives me a error. I put it on modem for both. have dev mode disabled. I run cdma workshop connect to port 2 hit read spc an get a error "Phone ask for SPC. SPC (6 digits) is required. Check "security" tab - "SPC" section."
I really need my MSL to fix my mms and Update my prl because i get a error everytime i try to.
Idk if this is info thats needed but i am rooted 2.2 rom
Am i supposed to enter a SPC before hand... lol or am i just missing something.
Edit: I also have the samsung drivers installed and am using the same cable i rooted with last night. The error i get with MSL reader is "ERROR: /dev/smd0 does not exist. This phone is not compatible."
I'm guessing you already tried this
gokuman56 said:
EDIT: Easier Way to get MSL. Okay so you have to download connectbot from the Market
1. Open ConnectBot
2. Agree Next Next Yada Yada
3. Press SSH and select Local
4. type in whatever you want by local and press enter
5. ok once you see a black screen and to the left a cash sign, type in "getprop" without the quotes
6. You should see a lot of words, scroll up all the way at the top.
7. Near the middle of the screen until you see [ril.MSL]
8. It will be 6 digits and that's your MSL
Click to expand...
Click to collapse
Are you trying to push a new PRL to the phone?
look here
Goto security, then send the default samsung password at the bottom left corner..
Then top right of the the tab click read spc.. the spc is the msl
Sent from my SPH-D700 using XDA App
Send the defualt password? just leave it on the toshiba or select a specific one? also just tried the connectbot way it gave me [ril.msl]: [000000] which IDK if thats right :\
lgevo said:
Send the defualt password? just leave it on the toshiba or select a specific one? also just tried the connectbot way it gave me [ril.msl]: [000000] which IDK if thats right :\
Click to expand...
Click to collapse
Doubtful but not impossible
Try this then see if it works
excerpt from 4g signal mod
1. Dial ##3282#
2. It will open a menu, click WiMAX and enter MSL. Note: 4G radio must be on.
3. Go to extensions and Hold EntryRX and Write Extension
4. Change the Value from -89 to -110 (The Lower the weaker the signal can be for the phone to connect.)
5. Change EntryCINR to 0004
just get to step 2 and see of it accepts your MSL
Lol wow it did thanks guys!
Have new to me Sprint HTC Evo rooted and I cannot activate on Sprint because I cannot get correct MSL. Sprint Tech gave me number it thought was correct but no luck. I downloaded a msl reader, EScode from PCWorld and it gave the same number Sprint had for the msl.
So, can anyone give me some help on how to obtain the msl?
Thanks for the help.
download msl reader from the market, and it'll give you the 6 digit code. You can remove the battery from the phone, and read off the meid number, and make sure the information matches the actual phone you have.
I'm not sure I understand. I have downloaded a msl reader and it did not work. Are you advising I download an another/different msl reader?
Naw, its the same one. The app asks for super user permissions, then gives you a 6 digit code? Also, your bootloader shows s-off?
WhoreDog said:
Have new to me Sprint HTC Evo rooted and I cannot activate on Sprint because I cannot get correct MSL. Sprint Tech gave me number it thought was correct but no luck. I downloaded a msl reader, EScode from PCWorld and it gave the same number Sprint had for the msl.
So, can anyone give me some help on how to obtain the msl?
Thanks for the help.
Click to expand...
Click to collapse
You may want to do a Factory Reset from Menu > Settings > SD & phone storage > Factory data reset.
After the phone reboots, it may go through the hands free activation. If it does, you're set. If not, by this time you should be able to enter the MSL. I would recommend doing a Data Profile restore by opening up the virtual keypad, typing ##DATA#, entering your MSL, going to Edit Mode and then selecting Data Profile. You'll be taken to the Data Profile page. Once you're there, press the Menu button on the phone and tap on the Restore option. Phone will reboot.
I did this even after rooting with Unrevoked3 and encountering the same issue and it worked.
Earlier today I had a successful attempt at installing FXP's CM9 126 build. As a requirement I had to flash the R800x_4.0.2.E.57_Verizon.ftf via Flashtool to my phone before I could flash the Rom. My phone's provider is Cspire(formally Cellular South), and after the ftf my phone is trying to make contact with Verizon for activation, leaving my unable to call or text on my own provider. I've tried flashing a nand backup I had of one of Codename Andriod that I created when everything was working perfectly, but it didn't fix the problem.
Thank you for your time and please let me know what I can to fix this.
Sincerely,
Frag_Bag
Frag_Bag said:
Earlier today I had a successful attempt at installing FXP's CM9 126 build. As a requirement I had to flash the R800x_4.0.2.E.57_Verizon.ftf via Flashtool to my phone before I could flash the Rom. My phone's provider is Cspire(formally Cellular South), and after the ftf my phone is trying to make contact with Verizon for activation, leaving my unable to call or text on my own provider. I've tried flashing a nand backup I had of one of Codename Andriod that I created when everything was working perfectly, but it didn't fix the problem.
Thank you for your time and please let me know what I can to fix this.
Sincerely,
Frag_Bag
Click to expand...
Click to collapse
You'll need to change the build.prop and apn settings. Found this from a quick search with someone that has a working verizon build.prop that is said to work on cspire
https://www.dropbox.com/s/dgteu3ziweifix8/build.prop
and his working apn settings:
https://www.dropbox.com/s/6cs5tqwdlcstt3s/apns-conf.xml
Also found this:
You could push the apn with ADB but i just edited mine with root explorer in /System/etc and restarted the phone.
As for CDMA Workshop is a service software for CDMA phones it is used for flashing phones to different carriers to put it plain as possible in my mind but it can be used for countless useful tasks, just Google it to read more. But the below method was much easier.
Dialing ##7764726(##program) is used to manually program your phone.
After dialing ##7764726 press call it will prompt for a SPC password it should be 000000
Then click User Activation
MIN1 I put the last 7 digits of my phone number.
MIN2 put the first three of phone number(area code).
MDN is your 10 digit phone number.
CDMA Sys ID put 1996
IMSI_11_12 put 12
Then hit back and click on SID/NID Pairs:
SID_1: put 1996
NID_1: put 65535
After this hit back till you exit all the way back out of the menu the phone will reboot after it reboots i dialed *22801 it didn't say anything just sat at the activation screen for about 30sec. Then it said reprogramming the phone then rebooted agin after that i was back on C spire.
Links are a little old but this is all I could find:
SID Database if you need to find a different carrier
http://www.the-answerman.com/sidlist/index.asp
Also the SID/NID I used was found in this PRL breakdown:
http://www.howardforums.com/showthread.php/1700374-New-PRL-60575-50575
The Second post of the page explains a lot more about PRL and SID/NID just good to understand what your kinda messing with:
http://forum.xda-developers.com/showthread.php?p=19537266
Also i don't know if this is the best way to accomplish this task but it took me awhile to figure out this fix it worked for me but i can't guarantee anything also im not responsible if something goes wrong and you brick(its always possible) but i am willing to help to the best of my abilities
Good Luck and sorry for such a long post.
agraceful said:
You'll need to change the build.prop and apn settings. Found this from a quick search with someone that has a working verizon build.prop that is said to work on cspire
https://www.dropbox.com/s/dgteu3ziweifix8/build.prop
and his working apn settings:
https://www.dropbox.com/s/6cs5tqwdlcstt3s/apns-conf.xml
Also found this:
You could push the apn with ADB but i just edited mine with root explorer in /System/etc and restarted the phone.
As for CDMA Workshop is a service software for CDMA phones it is used for flashing phones to different carriers to put it plain as possible in my mind but it can be used for countless useful tasks, just Google it to read more. But the below method was much easier.
Dialing ##7764726(##program) is used to manually program your phone.
After dialing ##7764726 press call it will prompt for a SPC password it should be 000000
Then click User Activation
MIN1 I put the last 7 digits of my phone number.
MIN2 put the first three of phone number(area code).
MDN is your 10 digit phone number.
CDMA Sys ID put 1996
IMSI_11_12 put 12
Then hit back and click on SID/NID Pairs:
SID_1: put 1996
NID_1: put 65535
After this hit back till you exit all the way back out of the menu the phone will reboot after it reboots i dialed *22801 it didn't say anything just sat at the activation screen for about 30sec. Then it said reprogramming the phone then rebooted agin after that i was back on C spire.
Links are a little old but this is all I could find:
SID Database if you need to find a different carrier
http://www.the-answerman.com/sidlist/index.asp
Also the SID/NID I used was found in this PRL breakdown:
http://www.howardforums.com/showthread.php/1700374-New-PRL-60575-50575
The Second post of the page explains a lot more about PRL and SID/NID just good to understand what your kinda messing with:
http://forum.xda-developers.com/showthread.php?p=19537266
Also i don't know if this is the best way to accomplish this task but it took me awhile to figure out this fix it worked for me but i can't guarantee anything also im not responsible if something goes wrong and you brick(its always possible) but i am willing to help to the best of my abilities
Good Luck and sorry for such a long post.
Click to expand...
Click to collapse
I was able to enter all the values for MIN2, MDN, CDMA, and IMSI, but the MIN1 Keeps telling me "Unable to set new parameter, I made sure there was a 1 before my 7 digit number. Thoughts?
Frag_Bag said:
I was able to enter all the values for MIN2, MDN, CDMA, and IMSI, but the MIN1 Keeps telling me "Unable to set new parameter, I made sure there was a 1 before my 7 digit number. Thoughts?
Click to expand...
Click to collapse
I don't think you'll need the 1. Just the last 7 numbers. Try that to see if it works. And just so you know, I'm on verizon so all my answers are coming from google at the moment lol
I left the number the way it was and finished the steps, everything is working as it should and I can call and text. Thank you very much. Now i just have to find a fix for Mobile data. I really do appreciate it.
Frag_Bag said:
I left the number the way it was and finished the steps, everything is working as it should and I can call and text. Thank you very much. Now i just have to find a fix for Mobile data. I really do appreciate it.
Click to expand...
Click to collapse
Mobile data would be in the build.prop and the apn settings, You should be able to use pieces from the build.prop I posted to work whatever rom you're on. I got to assume verizon and cspire are close to identical since they're both cdma. Half way there right?
agraceful said:
Mobile data would be in the build.prop and the apn settings, You should be able to use pieces from the build.prop I posted to work whatever rom you're on. I got to assume verizon and cspire are close to identical since they're both cdma. Half way there right?
Click to expand...
Click to collapse
Are these settings still current cspire settings... I lost 3g connectivity and would love to troubleshoot to figure out whats wrong with it... I did the ##Program and here are my settings
USER ACTIVATION MENU
MIN-my number with area code
IMSI_11_12 =23
MDN - my number with area code
CDMA system ID - 1996
EXTENDED NAM MENU
MIN = another local number
TRUE IMSI - 000000000007809
IMSI_11_12 = 23
MDN - my number with area code
CDMA system ID - 1996
Country code - 311
CDMA network - 65535
1st channel A - 283
1st channel B - 384
2nd channel A - 691
2nd channel B - 777
Access overload class 0
URGENT
im having the same issue when i use ##program and dail it does nothing but act like a collect call HELP
on cm9
Thanks...
agraceful said:
You'll need to change the build.prop and apn settings. Found this from a quick search with someone that has a working verizon build.prop that is said to work on cspire
https://www.dropbox.com/s/dgteu3ziweifix8/build.prop
and his working apn settings:
https://www.dropbox.com/s/6cs5tqwdlcstt3s/apns-conf.xml
Also found this:
You could push the apn with ADB but i just edited mine with root explorer in /System/etc and restarted the phone.
As for CDMA Workshop is a service software for CDMA phones it is used for flashing phones to different carriers to put it plain as possible in my mind but it can be used for countless useful tasks, just Google it to read more. But the below method was much easier.
Dialing ##7764726(##program) is used to manually program your phone.
After dialing ##7764726 press call it will prompt for a SPC password it should be 000000
Then click User Activation
MIN1 I put the last 7 digits of my phone number.
MIN2 put the first three of phone number(area code).
MDN is your 10 digit phone number.
CDMA Sys ID put 1996
IMSI_11_12 put 12
Then hit back and click on SID/NID Pairs:
SID_1: put 1996
NID_1: put 65535
After this hit back till you exit all the way back out of the menu the phone will reboot after it reboots i dialed *22801 it didn't say anything just sat at the activation screen for about 30sec. Then it said reprogramming the phone then rebooted agin after that i was back on C spire.
Links are a little old but this is all I could find:
SID Database if you need to find a different carrier
http://www.the-answerman.com/sidlist/index.asp
Also the SID/NID I used was found in this PRL breakdown:
http://www.howardforums.com/showthread.php/1700374-New-PRL-60575-50575
The Second post of the page explains a lot more about PRL and SID/NID just good to understand what your kinda messing with:
http://forum.xda-developers.com/showthread.php?p=19537266
Also i don't know if this is the best way to accomplish this task but it took me awhile to figure out this fix it worked for me but i can't guarantee anything also im not responsible if something goes wrong and you brick(its always possible) but i am willing to help to the best of my abilities
Good Luck and sorry for such a long post.
Click to expand...
Click to collapse
Thanks for copying and pasting all this from my thread you could have atleast acknowledged me since it's basically word for word
http://forum.xda-developers.com/showthread.php?t=1624990