Develop Bugs

Pure Gear Moto Atrix Shells

They offer several different ones, that look decent and aren't too expensive by any means. Just a heads up, for those of you who are looking for a new case. I'm probably going to order the fake leather one and the 'magnet gray' one as well.
www dot pure-gear dot com/shop-by-device/motorola.html

The plum case is slick lookin'...thanks for the link

http://www.pure-gear.com/shop-by-device/motorola.html
Loving the leather. And there cheap too!

Purple Drama Llama said:
http://www.pure-gear.com/shop-by-device/motorola.html
Loving the leather. And there cheap too!
Click to expand...
Click to collapse
I love how you linked the site while OP disguised his link
The leather one look cheap and tacky to me. These cases are nice but they don't seem to cover enough of the phone for me.

They look like the cheap (construction-wise) snap on cases. For $30, just get the Seidio Innocase. It's way better in my opinion.
Seidio Innocase II Surface - Black, Amazon
Black and other colors, Seidio Online
On Amazon I got it a week ago for $20, so maybe check a few times they drop the price every once in a while I think.

i got the same case that incipio made for $10 over at Fry's electronics

bobdurfob said:
They look like the cheap (construction-wise) snap on cases. For $30, just get the Seidio Innocase. It's way better in my opinion.
Seidio Innocase II Surface - Black, Amazon
Black and other colors, Seidio Online
On Amazon I got it a week ago for $20, so maybe check a few times they drop the price every once in a while I think.
Click to expand...
Click to collapse
I didn't want this to be a comparison thread. I simply wanted to point out there are alternative cases out there on the market.

I'm really glad you pointed these out. I used to have a Barely There case on my old iPhone and these look pretty similar to that (I really liked it). I've been waiting for a case like this! Since Case Mate doesn't make any for the Atrix, I might get one of these. The colors aren't great, but I hate cases that snap together...

Thanks OP. Just ordered the magnet grey one. Will update when it arrives.

Dr.Jeckyl said:
Thanks OP. Just ordered the magnet grey one. Will update when it arrives.
Click to expand...
Click to collapse
I'm ordering the grey one as soon as I get paid friday! I want overnight shipping, I don't care if I have to pay another 10 bucks to receive it, lol.

Yea.... they are quite nice looking. Not sure if i really wanna give up my TPU case though....
When either of you get yours.... mind posting some more pics? Would like to see what the inside of the case looks like, too.

elementaldragon said:
Yea.... they are quite nice looking. Not sure if i really wanna give up my TPU case though....
When either of you get yours.... mind posting some more pics? Would like to see what the inside of the case looks like, too.
Click to expand...
Click to collapse
Sure thing. I should have it tomorrow.

Just ordered the grey one, hopefully it arrives on Monday!

So can someone explain what exactly this case feels like? I don't REALLY get what a "rubberized satin finish" means... In the past I've used the case-mate barely there cases, which I like because they're not squishy or really rubbery and such. This pure gear case looks solid, but it says it's rubberized so I dunno.
And while I'm asking, what exactly is a TPU case (like this one: http://www.amazon.com/Amzer-Argyle-High-Gloss-Soft-Gel-Motorola/dp/B004L2L6JM/ref=sr_1_6?ie=UTF8&qid=1304100403&sr=8-6)
Is it similar to the pure gear material?

thebeardedchild said:
So can someone explain what exactly this case feels like? I don't REALLY get what a "rubberized satin finish" means... In the past I've used the case-mate barely there cases, which I like because they're not squishy or really rubbery and such. This pure gear case looks solid, but it says it's rubberized so I dunno.
And while I'm asking, what exactly is a TPU case (like this one: http://www.amazon.com/Amzer-Argyle-High-Gloss-Soft-Gel-Motorola/dp/B004L2L6JM/ref=sr_1_6?ie=UTF8&qid=1304100403&sr=8-6)
Is it similar to the pure gear material?
Click to expand...
Click to collapse
Just got mine. First impression is this thing is nice! One of the thinnest cases/shells I've ever seen. Just went into our QA dept to use a caliper and it only measures .86mm or .034" thick. The texture feels almost exactly like my old G1 did. Doesn't feel like it's going to be a lint magnet either. The grey color is a bit lighter than I was expecting too but not too light. It fits OVER the existing battery cover and fits nice and snug. No give in any direction at all. Overall I like it it so far.
I'll post pictures tonight when I get home.

thebeardedchild said:
So can someone explain what exactly this case feels like? I don't REALLY get what a "rubberized satin finish" means... In the past I've used the case-mate barely there cases, which I like because they're not squishy or really rubbery and such. This pure gear case looks solid, but it says it's rubberized so I dunno.
And while I'm asking, what exactly is a TPU case (like this one: http://www.amazon.com/Amzer-Argyle-High-Gloss-Soft-Gel-Motorola/dp/B004L2L6JM/ref=sr_1_6?ie=UTF8&qid=1304100403&sr=8-6)
Is it similar to the pure gear material?
Click to expand...
Click to collapse
TPU (Thermoplastic Polyurethane) is basically like a mix of a hard shell and a silicon cover. It's quite flexible, although not flimsy like a silicon cover.... and it's durable.... able to withstand quite a bit and still return to it's original shape. Actually recorded a video of me squeezing the crap out of one such TPU case that i got on eBay because of someone in another thread questioning the quality of the eBay cases.
http://www.youtube.com/watch?v=700ZNRtNEOA
As for "rubberized satin".... i believe it's basically a quite smooth yet soft feel.... not like a silicon, but not quite like a hard rubber case either. Hard to explain, really. If i had to guess, i'd say it might be similar to the Barely There case, but i'm not sure as i've never used either.

Here's some glamor shots of mine.

Hmm.... not too shabby looking. I may just order one.
edit: Just ordered the deep plum colored one. Only did ground shipping, as i didn't really feel like paying the same amount for shipping as i did for the case.... so it may be a little while.

Thanks for all the info guys! I always wondered what all these different types of plastic cases are. Thanks for the pics too, they inspire me to order one! Has anyone gotten the blue? How does it look in real life?
Sent from my MB860 using XDA App

Purple Drama Llama said:
http://www.pure-gear.com/shop-by-device/motorola.html
Loving the leather. And there cheap too!
Click to expand...
Click to collapse
Thanks for providing the link.

[Q] Best SGS2 Cases Available

Hi,
I'm waiting for my Samsung Galaxy S II to arrive in the mail that I just bought on Ebay for $770 CAD. I was wondering what were the best cases available that won't detract from the phone's, 'sexyness'. Here are a few cases I thought looked nice on Ebay:
Barely There Case:
http://cgi.ebay.ca/ws/eBayISAPI.dll...00292&ssPageName=STRK:MEWAX:IT#ht_2449wt_1115
Leather 'Wallet' Case:
http://cgi.ebay.ca/ws/eBayISAPI.dll...58999&ssPageName=STRK:MEWAX:IT#ht_3824wt_1115
Mesh Case:
http://cgi.ebay.ca/Samsung-Genuine-...Accessories&hash=item2a119b4aec#ht_4050wt_957
Does anyone know what would be the best case for what I'm looking for? I'm focused on quality and looks rather than the price.
UPDATE: I just read the thread rules that stated "no advertising of any kind". Please note that I am not advertising these products. I am only posting them here for comparative purposes, with no intention to sell any products.
UPDATE 2: I bought the "barely there TOUGH" case. It was a little more expensive than the average case (I think it's going for 30 on ebay as of dec 16) but let me tell you, it is probably the only case you'll ever need for this phone. It feels like my phone is wearing a badass suit while still lookin fresh. Buy this case. You'll love it.
Jamie

DJ_Junkee said:
Hi,
I'm waiting for my Samsung Galaxy S II to arrive in the mail that I just bought on Ebay for $770 CAD. I was wondering what were the best cases available that won't detract from the phone's, 'sexyness'. Here are a few cases I thought looked nice on Ebay:
Space Case:
http://cgi.ebay.ca/ws/eBayISAPI.dll...00292&ssPageName=STRK:MEWAX:IT#ht_2449wt_1115
Leather 'Wallet' Case:
http://cgi.ebay.ca/ws/eBayISAPI.dll...58999&ssPageName=STRK:MEWAX:IT#ht_3824wt_1115
Mesh Case:
http://cgi.ebay.ca/Samsung-Genuine-...Accessories&hash=item2a119b4aec#ht_4050wt_957
Does anyone know what would be the best case for what I'm looking for? I'm focused on quality and looks rather than the price.
UPDATE: I just read the thread rules that stated "no advertising of any kind". Please note that I am not advertising these products. I am only posting them here for comparative purposes, with no intention to sell any products.
Jamie
Click to expand...
Click to collapse
barely there and mesh case are similar..both are slim ,light.. both look perfect..
mesh case has holes that might help on heat transfer from the phone,and can be removed much easier than the barely there case..
both do not cover top and bottom of the phone(barely there protects about 0.5cm more)..
in terms of the two in my opinion mesh case is better,,
the other case protects much more..but makes your phone extra large..
its a matter of personal taste

I like the mesh case, but I doubt these cases will protect the phone from any falls. I really like the Rearth case, and the mesh case. I'm waiting now for a Case-Mate Pop case I'm going to review, which will be out in august or september as I was told from CM. The best thin cases? I really REALLY like the Rearth case. I reviewed it just yesterday, check out my sig for that. The Mesh case, which I also own, are very good, and leave the phone all sexy ... The CM cases, I don't like the barely there case series. I don't know why. It makes it look too plain.

ive got the mesh case in black look great on the phone and as already stated really easy to take on and off but it does collect dust and dirty under it like a magnet. plus probably not much protection if dropped

I've got the casemate tough n it is nice, stops dust n grease, would defiantly protect from a fall. However the phone gets stupidly hot n stays hot for ages. Just ordered a mesh case to see how that goes
Sent from my GT-I9100 using XDA Premium App

I have the samsung mesh in white and it collected dust under it like nobodys business! It looks sooo sexy though! Solution? I ordered a Zagg maximum protection and installed it on the back and sides... Like stated before, the case is so easy to put on it wrapped right around it perfect and you cant even tell its there. So i am totally protected (from scratches) and still look sexy and slim.
Sent from my GT-I9100 using XDA App

daddymatt said:
I have the samsung mesh in white and it collected dust under it like nobodys business! It looks sooo sexy though! Solution? I ordered a Zagg maximum protection and installed it on the back and sides... Like stated before, the case is so easy to put on it wrapped right around it perfect and you cant even tell its there. So i am totally protected (from scratches) and still look sexy and slim.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
this is the best solution..zagg for the corners and mesh case..

coming soon
http://www.otterbox.com/Samung-Galaxy-S-II-Commuter-Series-Case/SAM4-I9100,default,pd.html

Don't care for the mesh case... tops and bottoms are completely exposed.
I'm using the SGP Ultra Capsule in Soul Black, fantastic case.

I'm waiting for this case to be back in stock: http://www.senacases.com/samsung-cases/galaxy-s-2/ultraslim/
I love how thin this phone is and I dont want to ruin it with something bulky.

Check these out, not yet available but seems to be really good
http://www.otterbox.com/samsung-cases/samsung-cases,default,sc.html

Could someone please recommend a good slip-in pouch for the GS2?
I don't feel comfortable with the hard plastic cases, as they tend to harm the phone body after sometime..

anti-derivative said:
coming soon
http://www.otterbox.com/Samung-Galaxy-S-II-Commuter-Series-Case/SAM4-I9100,default,pd.html
Click to expand...
Click to collapse
niketshah11 said:
Check these out, not yet available but seems to be really good
http://www.otterbox.com/samsung-cases/samsung-cases,default,sc.html
Click to expand...
Click to collapse
Thanks guys,
I think the Ottercase looks the best so far, as it seems to have the most protection. My only concern is that it may make the phone look too bulky.
Any experience with these cases?
Jamie

I bought this one... cheap and great
http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=120702657798&ssPageName=STRK:MEWNX:IT

I've got both the Casemate barely there and the genuine mesh case (black with italic S character).
Both are thin, lightweight and adds a better grip without making it difficult to put the phone in and out of your pocket (I use tight pants ). In fact they are very similar, but the barely there has a bit more matte color, and is a tad more gray when compared to the completely black mesh case. Also the mesh case feels a tad better in the hand, and is easier to take on and off (it still sits firmly on the phone).
As you are talking about keeping the sexiness of the phone, I would recommend the mesh case But they both are good, so you won't be disappointed either way.

nicpol7 said:
barely there and mesh case are similar..both are slim ,light.. both look perfect..
mesh case has holes that might help on heat transfer from the phone,and can be removed much easier than the barely there case..
both do not cover top and bottom of the phone(barely there protects about 0.5cm more)..
in terms of the two in my opinion mesh case is better,,
the other case protects much more..but makes your phone extra large..
its a matter of personal taste
Click to expand...
Click to collapse
Hrti said:
I've got both the Casemate barely there and the genuine mesh case (black with italic S character).
Both are thin, lightweight and adds a better grip without making it difficult to put the phone in and out of your pocket (I use tight pants ). In fact they are very similar, but the barely there has a bit more matte color, and is a tad more gray when compared to the completely black mesh case. Also the mesh case feels a tad better in the hand, and is easier to take on and off (it still sits firmly on the phone).
As you are talking about keeping the sexiness of the phone, I would recommend the mesh case But they both are good, so you won't be disappointed either way.
Click to expand...
Click to collapse
Thanks for your input Hrti!
I heard a few other people saying that the mesh case doesn't quite cover the whole entire phone. And while the 'sexyness' is a huge factor, I am more concerned about keeping the phone completely protected. Cuz I'd be devastated if anything ever happened to my baby. lol.
Keep the suggestions coming!
Jamie

see my thread:
http://forum.xda-developers.com/showthread.php?t=1096459
i think these will be the best, D3O FTW

mucury case?
Has anyone had any experience with these?
It's called the "Mucury" case, I can only find it on ebay.
http://cgi.ebay.ca/i9100-samsung-ga...Accessories&hash=item2a10785213#ht_3691wt_957
Is it a good quality case? i.e. will it protect the phone from a fall at waist height?
Jamie

bassmonkey said:
I've got the casemate tough n it is nice, stops dust n grease, would defiantly protect from a fall. However the phone gets stupidly hot n stays hot for ages. Just ordered a mesh case to see how that goes
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
Got mesh case, now back using the case mate tough. Not sure what the mesh cases point is, top n bottom completely exposed, its a dust magnet. My phone dropped from the arm of the sofa and it came clean off. I suppose it does look nice but if that's the main concern and you're not bothered about the non protection it provides you may as well not have a case. That's just my opinion anyway
Sent from my GT-I9100 using XDA Premium App

bassmonkey said:
Got mesh case, now back using the case mate tough. Not sure what the mesh cases point is, top n bottom completely exposed, its a dust magnet. My phone dropped from the arm of the sofa and it came clean off. I suppose it does look nice but if that's the main concern and you're not bothered about the non protection it provides you may as well not have a case. That's just my opinion anyway
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
Thanks for writing that - I dropped my phone last night indoors on a carpet, and I've always used the mesh case - but it popped straight off and the phone and the case were about a meter apart when they settled.... (phone was fine btw). It got me thinking if I dropped that on concrete or something it'd be pretty badly damaged!
Was looking at the case mate tough - and it's not till I just read your post now that it's convinced me to get one!

[REVIEW][PICS]Qubits TPU Case

This case is pretty nice, I have the Diztronics Matte Case and this far superior.
EDIT: It appears I messed up with adding images, so I provided direct links to a Picasa album under the corresponding text.
First off, I'd like to point out its design.
https://picasaweb.google.com/103360287160249925033/GNexTPUCaseReviewImages#5694664838498885570
This case uses a combination of three forms of TPU.
The back uses two, and the side has the third. From the photo, the majority of the back is matte with a gloss design on the side of the back.
Now for the TPU on the actual sides on the phone:
https://picasaweb.google.com/103360287160249925033/GNexTPUCaseReviewImages#5694666212754847586
It's a nice textured form of TPU that provides a great amount of grip without making the phone impossible to slide in and out of a pocket or gather dust like silicon. It may just be that I'm fourteen, but I always found the Galaxy Nexus a bit slippery, or maybe it's because of this the darn phone gets, which looks great but isn't entirely practical.
The case itself doesn't add much to the size of the phone, but it provides decent, and very eye catching protection.
https://picasaweb.google.com/103360287160249925033/GNexTPUCaseReviewImages#5694664844600398466
The back of the case is also raised near the camera to prevent scratches that phones like the EVO were plagued with.
https://picasaweb.google.com/103360287160249925033/GNexTPUCaseReviewImages#5694666188166111906
The volume buttons get a dedicated cover, as expected, but makes them feel mushy, but they're really small to begin with.
The cutouts on the phone are pretty big and shouldn't have any issues, and there is also a double-holed thing at the bottom for lanyards.
https://picasaweb.google.com/103360287160249925033/GNexTPUCaseReviewImages#5694666177130719426
This is overall a great case, for its price its pretty hard to beat as well. You can find it here on Amazon.

Link to the buying site would be of great help bro

munchy_cool said:
Link to the buying site would be of great help bro
Click to expand...
Click to collapse
Its on the last line, but here ya go! http://www.amazon.com/gp/product/B0062V037Q/ref=oh_o01_s00_i00_details

That looks like the cover I had on my Incredible. I liked it, especially when I cut it to fit my extended battery... hehe! Though I dont know if the material is the same.
Sent from my Galaxy Nexus using Tapatalk

I've had this since launch, it costed me ~£4 from ebay which I was really pleased with.
So far it has treated me well, feels good, looks pretty good and protects my phone.
I should receive the Diztronic Matte Case sometime next week, I was hoping for that to be an improvement on this! (OP doesn't think so! )

I like that. I am using the stock one from Verizon. I am still waiting for a good case, but this one is pretty nice. I want a clip too I think. However, I break clips by bumping into things

Knether said:
I like that. I am using the stock one from Verizon. I am still waiting for a good case, but this one is pretty nice. I want a clip too I think. However, I break clips by bumping into things
Click to expand...
Click to collapse
What is the stock one from Verizon? It wasn't supposed to include one, was it?
Sent from my Galaxy Nexus using xda premium

The button protectors were too stiff for my liking. It is very grippy though.
Sent from my kanged up GSM Galaxy Nexus

2 dollars from Ebay.
http://forum.xda-developers.com/showthread.php?t=1418449

This is the only Galaxy nexus case I currently have, and boy does it get the job done for $2 from Amazon.
Almost got the cruzerlite but the price was right on Qubits.
Anyone know if I were to purchase an extended battery if it would fit with this case? Any extended batteries you'd recommend (for GSM) that won't break the bank (or my phone)

I ordered a clear one from amazon for $1.75. My old smoke TPU case was turning a bit yellow so I ordered this to replace it for a while. I'll post pics if anyone is interested.

Yeah I wouldn't mind seeing that thanks

Tudia Ultra Slim Melody Case

Has anyone got one? They look nice and get good reviews on Amazon but would be good if someone who has one could post some pics of the real thing. I have the Spigen ultra hybrid which looks great but adds a lot of bulk to the phone and doesn't feel so great. I also have a cheapo tpu case which actually feels great but the finish is a bit poor and its a little saggy.
http://www.amazon.co.uk/gp/aw/d/B00FOAK9CK
Thanks in advance:thumbup:

Link not working

lll_ari_lll said:
Link not working
Click to expand...
Click to collapse
Really works for me. Try this one http://www.amazon.co.uk/gp/product/B00FOAK9CK?ie=UTF8&force-full-site=1&ref_=aw_bottom_links

I don't have one, nor any experience with the maker, but they do look on the thicker side for TPU cases.

Now it's working... how so?
Yeah it seems like on the thicker side.

Got one of these today and really love it! Fantastic case.

"TPU" and "Ultra Slim" should never be uttered in the same sentence unless that sentence is "Nothing about TPU is ultra slim by any stretch of the imagination."
stahp.

Great case! Fits the phone perfectly without room for it to slide up and down inside the case. Buttons are not too hard to press but a little more difficult. All ports are accessible. The speaker grill cut out isn't perfectly put, but is just fine.

Still waiting for mine to be delivered, looks like it's coming from the UK from the US via snail mail.
Sent from my Nexus 5 using Tapatalk

lawsmal caught
Higgsy said:
Still waiting for mine to be delivered, looks like it's coming from the UK from the US via snail mail.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
how much is the shipping ?

£1.99
Got it the other day - nice case fist really well with no saggyness, I have ditched my spigen ultra hybrid for this as that whilst looking cool was too bulky.

This is a mediocre case at best. It's slim, but has the sticky feel of glossy TPU, which I hate. The design on the back may or may not appeal to you -- I found it repulsive. Overall, with this case, you get what you pay for. I personally think it ruins the aesthetics of the Nexus 5.

endigo85 said:
This is a mediocre case at best. It's slim, but has the sticky feel of glossy TPU, which I hate. The design on the back may or may not appeal to you -- I found it repulsive. Overall, with this case, you get what you pay for. I personally think it ruins the aesthetics of the Nexus 5.
Click to expand...
Click to collapse
If the back is so repulsive why on earth did you buy it in the first place? It was quite evident in the pictures and listings that it was glossy tpu and the back was the way it is. Surely one of the main reasons people buy this case is because they like the design on the back. The case is cheap but alot better quality than other tpu cases ( of which I have bought 2) of a similar price and ruins the aesthetics no more than any other case, compared to other cases I have bought including the spigen it follows the contours of the phone well.
Sent from my Nexus 5 using Tapatalk

Higgsy said:
If the back is so repulsive why on earth did you buy it in the first place? It was quite evident in the pictures and listings that it was glossy tpu and the back was the way it is. Surely one of the main reasons people buy this case is because they like the design on the back. The case is cheap but alot better quality than other tpu cases ( of which I have bought 2) of a similar price and ruins the aesthetics no more than any other case, compared to other cases I have bought including the spigen it follows the contours of the phone well.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Do you honestly think I would have bought it if I had known that I didn't like the back design? It looked great in the photo, but not when I had it in my hands.

Nextbit Robin Cases

It seems to me that the selection of cases for the Nextbit Robin is pretty poor so far and as far as I know, many known manufacturers are not planning to make cases for this device. Are you planning to buy a case? what case are you going to get?
Update
As far as I can see, so far there is still almost no selection of cases, however there are few screen protectors.
My favorite option so far is the following:
Amazon.com: Anti-Bubble High Definition Clear Shield by Dmax

There is so few options to go with.

Well, we have 3 different options, and different colors for the bumps case. Maybe they're not a lot comparing to other phones/companies, but I think we should just wait till 3rd party companies make more cases for Robin, it's a bit soon to see them out

Yeah, I'm still waiting if anyone have some new cases they noticed please share

Well the phone isn't released yet! And its a startup! So more should arrive soon!

DarkExistence said:
Well the phone isn't released yet! And its a startup! So more should arrive soon!
Click to expand...
Click to collapse
You are right. This is completely different from the devices that are currently out so it is very exciting. but we have to be patient.

iuserman said:
It seems to me that the selection of cases for the Nextbit Robin is pretty poor so far and as far as I know, many known manufacturers are not planning to make cases for this device. Are you planning to buy a case? what case are you going to get?
Update
As far as I can see, so far there is still almost no selection of cases, however there are few screen protectors.
My favorite option so far is the following:
Amazon.com: Anti-Bubble High Definition Clear Shield by Dmax
Click to expand...
Click to collapse
What kind of cases are you looking for? I personally love the bumps cases. Like are you looking for something similar to a flip case? Leather? I'd love to see what else others like.

Not cases, but skins are confirmed by dbrand, they have said they'll have them before the device releases!

daavm said:
Not cases, but skins are confirmed by dbrand, they have said they'll have them before the device releases!
Click to expand...
Click to collapse
Really stoked that we'll be working with dbrand on some Robin skins! Can't wait to see how they'll turn out.

http://www.ebay.com/itm/29168654229...49&var=590714977170&ssPageName=STRK:MEBIDX:IT

Yeah, I went with that one on Ebay.
Kind of surprised that there aren't any on Amazon.

I know they aren't cases but the dbrand skins look bloody awesome.

I ordered the scratches case because I really despise cases, but I also really want my Robin to stay in pristine condition. It is very small and clear, so it should do fine for me. As for all the people that want their phone put in a tank, I can see your side of the argument, and in that case, I have to agree that they don't have a very good selection.

bricky23 said:
http://www.ebay.com/itm/29168654229...49&var=590714977170&ssPageName=STRK:MEBIDX:IT
Click to expand...
Click to collapse
I bought this Fosmon case in clear. It's a little tight, so the middle sections of each side pulls outward a little. Cutout for the cloud sync logo on the back seems unnecessary, but most likely put in for the opaque color options. You can lay the phone face down and it won't scratch the screen.
My main gripe with the Robin was that it's very slippery -- even though it was touted as being a non-slippery phone -- but this case fixes that problem.
The imperfect fit makes it hard to wholeheartedly recommend, but it adds the much needed grip to the phone so I'm pleased for the low price I paid for it.

palf91 said:
I bought this Fosmon case in clear. It's a little tight, so the middle sections of each side pulls outward a little. Cutout for the cloud sync logo on the back seems unnecessary, but most likely put in for the opaque color options. You can lay the phone face down and it won't scratch the screen.
...The imperfect fit makes it hard to wholeheartedly recommend, but it adds the much needed grip to the phone so I'm pleased for the low price I paid for it.
Click to expand...
Click to collapse
Yeah I got the clear (cause I got the sick Electric model) and this one is also tight I only hope that since it is plastic it will mold to the device in time. like some of the other cases I've had of this material before.

The Infinite Asylum said:
I ordered the scratches case because I really despise cases, but I also really want my Robin to stay in pristine condition. It is very small and clear, so it should do fine for me. As for all the people that want their phone put in a tank, I can see your side of the argument, and in that case, I have to agree that they don't have a very good selection.
Click to expand...
Click to collapse
Bad choice I got mine together with my Robin and the Scratches case is really poor quality. Some parts of the plastic especially at the charger end of it, are so thin that they tear apart when case is removed a couple of times.
Hope nexbit will fix this at some stage,but not that disappointed at all as I just love the phone itself

I got some weak, POS pocket case off Amazon that doesn't really fit my phone, but I've little choice but to use it until I can get something better. I'm a little tempted by the Bruises, but the case on Nextbit's website looks different from the one on Amazon, with the one on Nextbit's website looking like it has little strawberry-like dimples that the Amazon one doesn't have on the back Even more confusingly, the Amazon Bruises case has the Nextbit logo, but the Nextbit one doesn't.
Alternatively, I've been considering either Fosmon case or one of the Orzly cases, but I don't want to waste my time and money on another crappy case.
ETA: Here's a link to Amazon's Bruises cases by the way. It looks a bit what I would imagine a Midnight Scratches case would look like.

If anyone wants to sell their Scratches case, I can buy.
Sent from my Robin using XDA-Developers mobile app

Got my midnight wrapped in a Bruises case I picked up off Amazon. It's perfect.

Waterproof case
Hey guys!
I can't find any waterproof cases specifically for our phone (only generic flexible cases). Can anyone give me a link to a non-universal case? Thanks in advance. Also people, who have the dbrand bamboo case, can anyone confirm it feels like wood (just wanna know before purchase ) Thanks, and have a great day.