I read this thread entirely: http://forum.xda-developers.com/showthread.php?t=1841759
But this method is no more valid for Kitkat, because Google has removed the module support in the kernel.
I found another solution: recompiling my own kernel.
I followed this excellent tuto: http://pete.akeo.ie/2013/10/compiling-and-running-your-own-android.html.
make flo_defconfigs
make menuconfig
=> disable module support
=> enable DVB-T
=> => include my DVB-T stick in the kernel
and I finally got a boot.img file that boots my Nexus 7 (2013).
- plugged my DVB-T stick
- execute the startdvb script (which creates the symlinks needed, and modifies the permissions)
- install droidtv apk (there is a lot of versions of this apk on the net). All are versionned 2.0, but signatures are differents
- start tuning the tv channels => it is working
But then, I still get a blank screen in droidtv.
I select a tv channel, but ... no image.
I tried this:
- tune to a channel inside droidtv (the green led of the DVB-T stick become steady ON)
- switch to VLC (or MX Player), and enter a network stream:
- udp://:1555
- http://:1666/tv.ts
neither is working.
In fact, I remarked that when I put droidtv in the background (to switch to VLC or MX Player), the green led of my DVB-T stick switch OFF. This could explain why I get no image inside VLC (or MX Player).
I don't understand how it could have worked for others.
I am worry to have struggled so much to recompile a kernel, to have found a DVB-T stick which driver is in the 3.4.0 flo kernel sources, all that to arrive at the conclusion that droidtv is not working.
Could someone help me?
Related
is the result of
http://4pda.ru/forum/index.php?showtopic=294336&view=findpost&p=18059768
screenshots in the post with the theme
Custom firmware
To install over rekaveri
alex-rev.1
before the tests do nandroid backup, just in case ...
installation
1. We enter into Recovery mode
2. We select Wipe Data / Factory Reset
3. choose mount and storage
4. select mount / system
5. select format / system
6. Choose install zip from sdcard
7. select chose zip from sdcard
8. Select the file alex-rev1.zip
install the firmware ....
9. We are waiting for inscription Install from sdcard complete
10. Then select Reboot system now
when flashing can watch the progress of the command line)))
recommendations
- Use the profile smartstrass2 122-825 MHz ....
- Do not play with overclocking ... kernel is not quite this and other profiles working correctly at high frequencies ...
- If not satisfied - you can rearrange the default kernel .... but I have consistently and correctly it works
Features
installed
- Root-Law
- BusyBox
- Bash-shell
- Jit
Change sound: system load, battery low, ringtone, notification ringtone, alarm-
Changed the boot-animation
Sewn scripts for system optimization and acceleration
Included tweaks to local.prop
Modified file build.prop
The hosts file is patched from advertising
Removed unnecessary applications
added adobe flash player - provided full work following applications requiring a flush ... its plug-ins or libraries ..
added and replaced the native browser to work with a flash
possible dispersal kernel
Sewn Link2sd supporting second ext4 Memory Cards
added support for swap
Enclosing support for recording from the line
particular attention paid to the sound - sound system replaced by alsy
Sewn equalizer
added xLoud, Bitsaudio - sound gorgeous! And the possibility of setting it too high
added music and video player with Kodak
added office
Added Opera Mini
added application Vkontakte
Sewn blocker
font replacement - no problem with the Cyrillic and kryakozyabry of the player and the system ...
Many more pleasant things ... yet)
----------
criticism,
- Guys or who had not to use)
- If you do not like something - there is a lot of decent options for the use of
- ... the taste and color - all the markers are different ....
- Do for themselves and for themselves
- Constructive suggestions welcome
- The next build I do not know when it will be done
- In the course understand
- In my opinion the best and choose to add
- Tongue wag ... no bags roll ...
- If you want to help - I do not refuse)
in terms
finish blocker
fade-away
improve)
many thoughts ....
download links
http://narod.ru/disk/64744837001.e4054368c96da943a3b036870a84559b/alex-rev1.zip.html
http://www.mediafire.com/?gb9g75p0zh1ahrz
md5sum
alex-rev1.zip
AE71D791B7A59D14A00776E6300E89B8
If you like my work, please press Thanks Button!
quick question
Anyone have any idea how to set up some sort of quick boot.seems like all androids from first to latest take FOREVER.If you can make a bloated oversized o/s like windows quickboot.lets figure this one out.attatching buildsysprops maybe thatll help
ideas?
usually a file generated by the program assembly
API 15 says that it is for android 4 *
need to search the forum on creating and editing buip.prop
but not in this thread)
I like this a version , but this a version do not support Persian or Arabic, and this is very uncomfortable for me .
At least SMS and Web
Please make it possible
Thank yo
nowak2 said:
I like this a version , but this a version do not support Persian or Arabic, and this is very uncomfortable for me .
At least SMS and Web
Please make it possible
Thank yo
Click to expand...
Click to collapse
think
while others try to build
http://4pda.ru/forum/index.php?showtopic=294336&view=findpost&p=19037286
http://4pda.ru/forum/index.php?showtopic=294336&view=findpost&p=19437787
need to completely redo the entire assembly
I can try
need a full copy of the firmware folder /system/ with the desired language
I find it easier to rebuild for the new firmware
and boot.img kernel rekaveri
Put on the sharing link here and tell
for example http://www.mediafire.com
trying to eliminate defects....
some of my build here is not lined
You can view the complete list of work here - http://4pda.ru/forum/index.php?showtopic=294336&view=findpost&p=19780784
here is not often )
constantly on the Russian forum http://4pda.ru/forum/index.php?showtopic=294336
write in the subject - I will try to help
there can follow the news of assembly and firmware
Start new topic
decorations - http://4pda.ru/forum/index.php?showtopic=426426&view=getnewpost
This may be used http://translate.google.com
Translated Link:
http://translate.google.de/translat...dex.php?showtopic=479224&st=120#entry23833639
Original Link:
http://4pda.ru/forum/index.php?showtopic=479224&st=120#entry23833639
- Based on China Unicom version of the official EmotionUI latest upgrade package B115 production, complete ROM production
- Streamlining of the system most of the unwanted programs, such as promotion of operators, telecom customized help and other procedures, reducing the ROM size, reduced memory footprint
- Added full ROOT permissions
- Use SuperSU latest version 1.41 as a super administrative privileges
- Updated Busybox and su binary file
- Streamlined out CUST in music and video, as well as unwanted pictures
- Optimization of the system program zipling further optimize the system memory usage
- Turn on call recording function (call will see more options click the record button)
- Modify Call (millet calls) as well as the alarm tone (Secret Garden)
- Open Theme Manager Online Themes Gallery
- Adjust the boot order of the default desktop icons
- Added new ATX Advanced Settings v0.3, see the following detailed description
- Fix the previous user swipes down notification bar after losing control of the problem (if there are questions, please timely feedback to me)
- To join the list of animation from mokeeos can turn off the ATX advanced settings and effects replacement
- Set up by adding the Quick Start option, Huawei's 5 seconds boot function, the first boot enabled by default
- Join ZTE screen assistant tool, open your own needs
- According to contest requirements, join the ING market, potatoes video client, the brush into the back, in the case of open networking for me a moment to complete the entry support
The new ATX v0.3 Advanced Settings
- Support the on / off status bar shows the percentage of power
- Support on / off GSM network crack (reboot to take effect) - Telecom Edition exclusive
- Support your lock screen is turned on / off mobile data connection
- To support the boot Mute
- Support Huawei and Google lock screen lock screen toggle native
- Support for the user to streamline Google Services Framework, reducing memory footprint (first start Google Framework installed by default)
- Join the engineering mode Quick Entry
- To join the list of super brightly animated, animation effects can define, can also be self-closing
Click to expand...
Click to collapse
Instuctions:
http://translate.google.de/translat...index.php?showtopic=479224&st=0#entry23399079
Anyone tried?
I think it cant work with closed BL and without working fastboot commands?! (the install script inside the package just use fastboot commands to flash)
the language seems to be Russian on that ROM
Ruchira88 said:
the language seems to be Russian on that ROM
Click to expand...
Click to collapse
This custom ROM taked from china forum.
I installed that some time ago ... from the russian board and it worked ... but as it had no informations bar, I went back to B107
Can anyone port "ATX v0.3 Advanced Settings" as an apk from the rom?
Edit: Found the APK from the rom but it fails to install.
Edit2: Tried sideloading it into system/apps/, but it does not appear in launcher drawer, any help?
List of Chinese custom Roms: http://cn.club.vmall.com/forum.php?mod=viewthread&tid=199781&extra=&page=1&mobile=yes
tauio111 said:
Can anyone port "ATX v0.3 Advanced Settings" as an apk from the rom?
Edit: Found the APK from the rom but it fails to install.
Edit2: Tried sideloading it into system/apps/, but it does not appear in launcher drawer, any help?
Click to expand...
Click to collapse
Have you actually tried the ROM itself ? Just curious, it seems interesting and I may give it a try.
Otherwise sorry but can not help with the apk.
LL13-
No, I have not tried this ROM, since I've had this phone for 2 weeks only. I usually wait a few months before flashing a custom rom. ATX advanced settings are what I'm only curious about in that rom, because it has an ability to disable the huawei lockscreen and use the AOSP one instead.
This thread should contain only information about the N1 internals (how to root/flash/etc). Since the device is very new (and I'm far from an expert) the information here will be a bit random at first.
How to root?
See http://forum.xda-developers.com/showpost.php?p=60839233&postcount=38
How to install Google Play Services?
See http://forum.xda-developers.com/showpost.php?p=60839233&postcount=38
You will be able to install Play Store, but it will tell you that certain apps are not compatible.
(for example Gmail and Firefox are avaiable, but Google Maps and Google Chrome are not.)
Official images/ROMs
If you check for update the device makes a POST request (you can make one with Chrome+POSTman extension) to Foxconn's servers at http://www.fc811.com/OTA/GetOTAFirm...kia_N1&fw_id=XXXXX&serial_no=YYYY&version=1.0
where fw_id is your current firmware version and serial_no is you serial number (this is not validated, you can enter anything). This returns a JSON that contains a changelog and a link to the update.
Valid fw_id-s and their download links (there might be earlier versions)
A5CN114
?
A5CN204
http://ota-service.oss.fc811.com/up...634e32cd5ec2&filesize=331308554&sn=L123456789
1. Z-Launcher update to v1.1.3-beta
2. The Store update to v2.60
3. Fix wrong brand name
4. Change Browser's default homepage to http://n1.nokia.com/cn
5. Fix some of the audio jack detection failure while plugging/unplugging earphone
6. Fix speaker crack sound issue in high volume level
7. Unstable speaker volume issue has been improved
8. Improved Bluetooth device discovery stability
9. Improved video playback smoothness while pausing and seeking
10.Improved performance on some apps Mail, The Store, etc
A5CN20C
http://ota-service.oss.fc811.com/up...c634ec3565efa&filesize=18216049&sn=L123456789
1. Fix unstable speaker volume issue
2. Fix Gallery crash when deleting last photo
3. Fix wrong Wi-Fi status when connecting to Internet in China
4. Fix wrong battery capacity information
5. Fix wrong APP icon size in Android Launcher
6. Update The Store to v2.61 for stability fix
7. Other Minor fixes\n
A5CN21B
http://ota-service.oss.fc811.com/up...c634fbd4f5f58&filesize=22680398&sn=L123456789
1. Z-Launcher update to v1.1.4-beta
2. Upgrade Android OS to the latest version 5.0.2
3. Optimize the wake up mechanism caused by notification
4. Optimize defragment mechanism of the storage
5. Fix color display error in some picture formats
6. Update Intel translator"houdini"
7. Optimize notification mechanism of the system OTA upgrade
8. Fix Wi-Fi enable failed issue in some cases
A5CN30B
http://ota-service.oss.fc811.com/up...c6350085b5f78&filesize=15641612&sn=L123456789
1. Z-Launcher update to v1.1.16-beta
2. The Store update to v2.62
3. Optimize the double tap to wake up feature and touch stability
4. Fix dual channel recording issue with some 3rd party app
5. Show actual date with calendar app icon in android default launcher
6. Add headset icon to show headset connection status
A5CN315
http://ota-service.oss.fc811.com/up...c635057645fa1&filesize=19534931&sn=L123456789
1. Z-Launcher update to 1.1.18-beta
2. Fix duplicate contact on home screen with android native launcher
3. Modify maximum headphone volume and alert icon to reach european standard
4. Optimize network connect compatibility
5. Optimize OTA download configuration
6. Optimize ambient light detection accuracy and enable adaptive brightness as default
7. Optimize boot animation performance
These are .zip files that contain a boot RAMDisk and the patch. Android patchfiles are binary diffs, so they cannot be extracted/messed with as I know.
BUT the 204 update is an exception, its 300+ megs whereas the others are 20-30 megs. This was not made with the binary patch method, so (to my best understanding) it contains a full system image in the form of a system.new.dat file. According to a post here they can be extracted.
Taiwan released N1 update link
http://ota-service.oss.fc811.com/up...c635057645fa1&filesize=19534931&sn=L123456789
I have the Chinese N1, rooted with build number A5CN51C. Is there a newer fw available that I can flash through CWM? I can see build number for Taiwan N1 is higher, but question is if I can flash it?
tried IRS below to test it out and it worked great back on KitKat
SRS Audio HD [SRS GEQ - Acoustic + SRS TruBass - 50% + SRS Dialog Clarity - 50%]
I finally updated to lolipop, i have V4a working except the IRS file isn't being detected.
Beats Audio for example works just fine, but nothing changes when i go to the SRS irs above.
Any advice? I've posted in nearly every V4a thread i could find and i keep getting told to reach out to maker of IRS file :\
Device: Nexus 7 2013
OS: 5.1.1.
Rom: Optipop
Kernel - Elemental X
SElinux - permissive
No other audio processors installed
BusyBox on rails installed and ran
Media Player: Power amp.
Prior on Kitkat, i had to install it as a user app, and then use the banned app to move it to system\app in order to get all IRS files to work. IRS files are crucial to me because i use my N7 2013 in dash in my car.
On lolipop, no matter what method i use (whether i install apk, move apk to system\app or flash viper4android zip files), i can get it to process audio under poweramp, but irs files aren't being truly recognized (some are)
Any suggestions?
P.s. - i have been using the following two zips from these threads :
http://forum.xda-developers.com/lg-...-viper4android-lollipop-t3075794#post60588642
and
http://forum.xda-developers.com/google-nexus-5/themes-apps/discussion-viper4android-t2543796
as well as the apk from the official site.
EDit: read the last 3 pages, I will try the APK method on it's own as a user app, will report back.
Edit: installed 4.x apk , installed drivers , set my settings, rebooted, used the "banned" app to move to system app. Convolver IRS files work flawlessly, and i have to set it to compatible mode, but now i have constant popping in audio :\
What version of SELinux Mode Changer are you using?... I had issues getting the latest version (3.01) to work. I went back to SELinux Mode Changer 1.2 and Viper4Android FX v.2.3.4.0 to get it to work on my N7 2013. It does not boost the volume up that much, but it provides better clarity at a higher volume. I'm running Viper on "Stock" LP 5.1.1 rooted.
Edit: Also try testing using a different player and check the Driver Status under Viper.'s setting to check if it's processing.
tamanaco said:
What version of SELinux Mode Changer are you using?... I had issues getting the latest version (3.01) to work. I went back to SELinux Mode Changer 1.2 and Viper4Android FX v.2.3.4.0 to get it to work on my N7 2013. It does not boost the volume up that much, but it provides better clarity at a higher volume. I'm running Viper on "Stock" LP 5.1.1 rooted.
Edit: Also try testing using a different player and check the Driver Status under Viper.'s setting to check if it's processing.
Click to expand...
Click to collapse
I used version 2.0.2
It worked fine in changing it (latest one didn't).
Also, it's processing, it's the Convolver and IRS that isn't.
bump
help
bump!
interesting turn of events, i used the lolliviper zip above in the links, and then moved it manually back to user app but left the preinstalled drivers and audiopolicy included in the zip in the system files.
v4a disappeared, okay no biggie, reinstalled the apk from the official site, settings were all there, drivers were already installed from prior installation. Poweramp works, all irs files work, no cracking or popping.
What a complicated route to take to make sure all irs files and poweramp to work, but the audiopolicy is key, i can upload it for those who are interested to decipher for me what i cannot specifically
bump
Still need help, 3.5mm connection via n7 2013 on power amp +5.1.1 + v4a = static and popping
Hi guys
I just rooted my phone and installed 5Toos rom with viper4android
But I just installed it and even when I enabled it ...it doesn't show processing....
I enabled master limiter but still the processing shows NO ....
Somebody can you give me a tutorial ????
I searched everywhere but still no help !!!!
rohithksaj said:
Hi guys
I just rooted my phone and installed 5Toos rom with viper4android
But I just installed it and even when I enabled it ...it doesn't show processing....
I enabled master limiter but still the processing shows NO ....
Somebody can you give me a tutorial ????
I searched everywhere but still no help !!!!
Click to expand...
Click to collapse
Remove whatever you installed completely. If there's an uninstaller, use that. Install the LegacyFX module through Magisk. Just follow the installer prompts, vol + or vol -, for which options you want. (I chose the older version 2.3.) At the end you can choose to make it a system or user app; I chose system. It works fine.
The device has rooted magisk
my audio experience on 1 + 5t is amazing 1 stereo system on iphone headphones you just need to install the magisk ainur sauron + viper4androi module and fix packages so that it combines together into a perfect effec combination Here you will see the power of the lord when listening to music on spotify
Experience after many trial order installation
1: ainu sauron
2: viper4andoid
3: audio compatibility patch it will create a link
4: audio modification lybrary: the module to work well on the music player is acp.zip you will find it in the link below
5:Add Dts headset port
Just the order above is enough to make you perfect sound
After having all the mods above, you will see viper4andoi change the color of the sign that it is working to enjoy the sound of the lord of the ring.
i can't upload the link you just need to search on google on "Ainur saron"
There are 2 versions for me to choose sauron
download latest 2.7 from xda lab
download and install audio modification library
open viper install driver and reboot