Related
About this ROM
This ROM is all about battery, performance and stability. GioPro, SimpliGio, and Sgg dt have many tweaks which are not working due to syntax errors. While some others may work but are not optimized for our Gio. Don't get me wrong. They are great roms! But I hope I can correct what I feel they did wrong.
Screenshots
Features
- ROM Base: XXKS2 (Android 2.3.5)
- Stock rooted
- Deodexed
- Zipaligned
- Custom themes
- Fixed Gingerbread lag
- Clean ROM
- Improved performance
- Improved battery life
- Improved stability
- Integrated APP2SD by darktremor
- Tweaks from GioPro, SimplyGio, Sgg dt and even tweaked them for better results
Downloads
v3.1 - GT-S5660XXKS2(2.3.5)
v2.3 - GT-S5660XXKQG(2.3.4)
Download List
Froyo KC6 build of my ROM is coming soon for those who do not like Gingerbread
Click to expand...
Click to collapse
Donate me if you like my work
Installation procedure
Download mode: Volume down + Home + Power button (do this when talking about flashing with odin)
Recovery mode: Homebutton + power button (do this when talking about wiping data,cache and dalvik cache)
1. Download v3.1 - GT-S5660XXKS2(2.3.5) first.
2. Flash with Odin and OPS file
3. Boot into CWM Recovery: Home + Powerbutton (hold both)
4. Wipe data, wipe cache, and wipe dalvik cache
app2sd 1. Format partitions like this: 1-fat32 & 2-ext2 (Use EASUS Partition Manager for example to do the job)
app2sd 2. Run APPSDGUI and change whatever you want.
app2sd 3. Reboot
Themes
If you are experienced in theming, feel free to do so for my ROM. I will happily add them to this page.
Issues
- KS2 has Wifi detection problems. Try setting the Wifi scan interval lower in the build.prop (15-60)
Changelog
-v3.1 06/10/2011
- Forgot to deodex and zipalign in previous version. This ROM is now deodexed and zipaligned
Click to expand...
Click to collapse
-v3.0 06/10/2011
- Updated base to XXKS2(2.3.5)
Click to expand...
Click to collapse
-v2.3 02/10/2011
- Dalvik heapsize increased to 80m for testing.
- init.d auto detect scripts
- APP2SDGUI integrated
- And some more tweaks.
Click to expand...
Click to collapse
-v2.2 22/09/2011
-v2.1 19/09/2011
ROM released
Version 1.1 uploaded at http://code.google.com/p/gt-s5660-jonashendrickx-rom
Added app2sd support
Let me know what you think of it
Hi,
Can you give me the link for app2sd? There was link before. Please beacause i cant, do it in my gio.
woda85 said:
Hi,
Can you give me the link for app2sd? There was link before. Please beacause i cant, do it in my gio.
Click to expand...
Click to collapse
I had integrated app2sd. But it was not working on reboot. So I had to reapply it again.
I am currently asking people for help on how I can keep a2sd on start.
However a2sd can be found here
http://forum.xda-developers.com/showthread.php?t=1209425
If you happen to know a solution on how to auto start scripts let me know
i dont know. for link2sd i use script manager to run "install-recovery.sh"
I will look for script manager.I will work as fast as possible
good work !! screenshot plz
djjonastybe said:
I will be making custom ROMS for Android in the near future.
Features
- The latest ROM base available
- CWM Recovery
- Stock rooted
- Deodexing: means that this ROM is themeable
- Zipaligned: all *.apk and *.jar files are optimized for faster access and smaller file size
- This ROM is themeable
- Tweaks for RAM, ...
- Replaced default messaging app with Go SMS Pro
- Replaced touchwiz launcher with GO Launcher Ex
To do:
- LCD Density
- integrated CWM recovery
- 5 lockscreen mod
- extended power menu
- app2sd (need help on how to auto start the scripts???)
Downloads
Installation procedure
For best results, flash this ROM first:
http://hotfile.com/dl/128609834/5d1ee8e/S5660XXKQB_S5660XXKQ5_S5660PRTKQ4.rar.html
Pass: samfirmware.com
1. Open up odin
2. Connect phone to computer (make sure it is in debugging mode)
2. Select 'One package'
3. Now select the package where you have downloaded or extracted my ROM
4. Press 'Start' - WARNING DO NOT DISCONNECT!
5. Reboot to recovery and do a data wipe/reset. Else in the phone dialer type *2767*3855# for a reset.
Donation
Donation is always welcome. Donation can be done to [email protected] @ Paypal
I also have a international bank account...
Donation money will only be spent for buying a second Gio or will only be spent for use in my project.
Helping
Help is greatly appreciated. If you are interested to share information let me know...
Credits
dharamg3
Click to expand...
Click to collapse
Please, no default ROM manager. There are users who brick their phones using ROM manager, apparently without doing stupid things. Please see here: http://s5660.pl/temat-martwy-gio
forum is in polish, but google translate will do a good job
And if I'm allowed, please let me tell what I would like to see on a "generic" custom rom:
- rooted;
- root explorer integrated;
- deodexed;
- phone should not be unlock by menu (power) button + left touch button (as with gio versions);
- safe tweaks to memory;
- a2sd installed but not activated (I don't like logs full of errors from a2sd);
- GUI: icons from GIOpro_v3, CRT animation, unlock buttons from simplygio (the round blue-red ones, with a sharp corner) - or a separate theme (maybe editable by userd) that can be applied;
- default: launcher (can be changed by user, no big deal), music player, no app that can be installed simply from market or internet.
Thank you for sharing your knowledge and (the most important!) your work with us!
Screenshot Please.
I also would like to not to have unlock by menu option.
Screenshots coming!
Do you guys mind I replaced the default messaging mms.apk with Go SMS Pro? Since there happens to be a bug in mms.apk on every Gio that makes the keyboard appear relatively slower.
v1.4 will feature Touchwiz launcher again, removed CWM
djjonastybe said:
Screenshots coming!
Do you guys mind I replaced the default messaging mms.apk with Go SMS Pro? Since there happens to be a bug in mms.apk on every Gio that makes the keyboard appear relatively slower.
v1.4 will feature Touchwiz launcher again, removed CWM
Click to expand...
Click to collapse
Go SMS Pro is free on the market, and removing mms.apk is easy with root explorer, isn't? I don't think you should bother replacing the default one.
In place, I propose to do something like Slax:simple updates that can be applied over the ROM, to add (or change) functionality.
so, for example, there should be one update to replace the default messaging application with Go SMS Pro.
is-it reasonable? it should help you to release a clean bug-free ROM, and users will not flash the whole system over and over again. IMHO this will be great.
esilviu said:
- root explorer integrated;QUOTE]
That would voilate xda warez policy.
As for gui easy use uot kitchen
Sent from my ST15i using xda premium
Click to expand...
Click to collapse
r33p said:
esilviu said:
- root explorer integrated;QUOTE]
That would voilate xda warez policy.
As for gui easy use uot kitchen
Sent from my ST15i using xda premium
Click to expand...
Click to collapse
-then don't include root explorer (but prepare all the background for it to work properly)
-uot kitchen is online for the moment... who will know how it will be a week from now... but yes, it's a good idea to have a few themes as zip file to be updated on the phone.
Click to expand...
Click to collapse
Root Explorer suckes in my opinion...
Try looking for Advanced Tools (free)
It has a built in task manager which is able to see everything. Not just running programs, even the acore etc...
The file explorer is far superior to those I have seen. You also have like 4 tabs.
A build.prop editor is also in it.
If you guys want I will release a quick fix with just the Mms.apk and touchwiz30launcher.apk back in action. But I am actually working on ext2 conversion and support for /cache /data and /system for our phone... So far it works, I have Quadrant score of 1600
djjonastybe said:
Try looking for Advanced Tools (free)
If you guys want I will release a quick fix with just the Mms.apk and touchwiz30launcher.apk back in action. But I am actually working on ext2 conversion and support for /cache /data and /system for our phone... So far it works, I have Quadrant score of 1600
Click to expand...
Click to collapse
Advanced Tools is looking good, but I did not test-it enough (yet).
1600 on Quadrant is quite a good score, it just tell us that you are on the right way!
I understand that at this moment moving/extending some folders on the sdcard is the hardest part. What happens with the system when card is connected as storage on the PC? Only fat32 partition is unmounted? More...I'm almost sure that the speed of sdcard is inferior to the speed of internal storage, so moving everything on the card will slow-down the phone. Installing conventional linux on sdcard/usbstick is not recommended: usual read-write cycles of the OS wear the sdcard/usbstick very fast.
So, imho, only the storage folder of android OS should be moved.
I still vote for a minimum modified ROM, that will allow any other modification with only "updates" and simple file replace/edit on the OS.
and another thought: "free RAM is useless RAM",
in other words: internal memory of the phone should not be as empty as possibly... (it's like you have a fast car in the garage but you use a slow and hungry cart to drive)
GT-S5660M ?
Will this work on the Samsung GT-S5660M
This is apparently slightly different version that is sold in Canada by Bell and Virgin Mobile. This thread explains more about the differences
If I5660XXKQB works for your phone then this one will work as well.
My personal opinion is every model has its own firmware. For the best experience of your phone and the least bugs, you should use your own phone's firmware for your safety.
But I remember I5800 and I5801 being fully compatible with eachother. But this wasnt the case for I5000 and I5000L for example. Honestly I don't know it is you having that phone !
Before starting trying to close this thread, remember that I have permission from Chef_Tony (Blackstone mod), fagyi (the ROM creator) and it's tested by me and more!
THIS ROM COMES FROM TIAD8 WEBSITE, AND THE MEMBER FAGYI DID IT!1. post = IceBread Info
2. post = IceBread Change log
3. post = IceBread Downloads
4. post = IceBread Tricks
Hello Guys
First of all I would like to thank all xda member & devs,modaco devs,Cyanogen Mod team, neopeek, tiad8, arrrghhh, midnight,tillaz,Paul O'Brian, tilal6991 and everyone who is working on the latest Gingerbread Android build from this website.
ICEBREAD V0.7
IceBread is a custom Rom for Blackstone!
Based on XDAndroid, thanks again for this!
So this IceBread v0.7, android 2.3.7 Build and with EXT2 partitions. You will need to do partitions on your SD Card!
Ok, I'm working on it with this build lot of time merging lot of stuff, I learned a lot of tricks from another device and now it's here for you guys! And I think I found the Best build for blackstone!
I manage this build up to date with latest stuff all time.
MAIN FEATURES & BENEFITS OF USING ICEBREAD BUILD
- ICS Themed
- Better memory optimization
- Better dalvik cache
- Better Overall speed
- Very Smooth
- Overclockable
- Very good battery
- Good Configuration
- Bug Fixing
- Many more.
Important!
Doesn't work :
USB - you need dualmountsd or maybe other app for this. Dualmount is better than stock so for me this is important.
Youtube HQ
Front Camera
FM Radio
If you dont use maps please delete before installing from system/app and delete maps.apk & maps.odex. You have more speed w/o Maps.
I need few good report from this build.
Installing
Here is how you should use your SD (You can use Minitool partition wizard or EASEUS Partition master):
Remember you must do the partitions on this order!
A FAT32 partition with any name you like and with the rest of the space avaiable on the SD
A EXT2 partition named system with 250 MB
A EXT2 partition named data with 800 MB
Lastly, another EXT2 partition named cache with 100 MB
With versions before 0.6:
1- Put npkboot your sdcard root
2- put update-IceBread-v0.x-zip to your sdcard root
3- Run haret, press volume down when it asks you to do it ( once, not pushing! ) ( enter recovery ) /press vol:up,down,up /
4- Format : system,cache,data partition in mount & storage / Not formatting to SDcard /
5- Install this build ( you will see a message saying formatting to EXT3, no worries )
6- reboot and run haret again and wait(not pressing anything).
With version 0.6 or more:
0- Same steps as before (1,2,3,4,5 and 6)
7- reboot to recovery
8- flash latest gapps from cyanogenmod site, we need cm7 gapps ( google -> search -> latest gapps )
9- after updating, reboot and run haret again
10- setup everything, reboot
11- Have a nice day with IceBread!
_______________________________________________________________________________________
After 1. boot you don't touch the screen ~ 5min! after sign in gmail, press menu preferences, restore launcherpro backup yes -> reboot yes -> reboot ( I added for you my launcherpro settings )
After 2. boot open all apps -> reboot
After 3. boot you have max performance!
If you like this build, please hit thanks button.
Thank you very much!
Hope you like it
Change log
IceBread V0.7 ( 2012.07.20 )
Change Log
- Scrolling cache disabled in framework.jar for smoother scrolling! look in widget page example really fast now! Hot New stuff for our device which working
- Optimized init.d folder
- Bin / Xbin folder changes
- Build.prop it has better configuration
- Fixed fast battery drain.
- Added my launcherpro backup to this version.
- HW keypad modded now its ok with all option. blac and blac100 or original
- more what i dont remember at the moment.
IceBread V0.6 ( 2012.06.30 )
Change Log
Full Pack
- Highly ICS look
- Settings.apk modded, like few stuff from ICS
- SystemUI.apk modded, like few stuff from ICS
- Mms.apk modded for Black themes ( like OMFGB )
- USB updated now its fully working via dualmount. May be native too ??
- Audio updated in system
- Hosts file are updated
- Minor speed tweak
Note:
this pack has my latest recovery/npkboot with one newest kernel (today)which may be fixed the incoming call reboot issue on topaz.
IceBread V0.5
Change Log
- It has all feature from V0.4
- Beats Audio support
- XLoud Engine support
- All System are updated
- Merged & using now New htc-acoustic code rebuild the audio structure : thanks to detule ; acl ; mwierauch
- BT audio test, hope its finally done.
- Zipalign support merged to this release, | system/app/* & data/app/* |
- Battery improvisation for better read and better life.
- Sony Bravia Engine reported/readded | Need test |
- DSPManager ported/added.
- Added Flash player support ( armv6 version ), hope its finally works. / on skate nice /
IceBread V0.4
Change Log
Light edition.
- Root fully working now latest su binary, of course with Superuser app
- Busybox installed and works
- Google Play added latest!
- Added Terminal emulator for Development app
- Added Appwidgetpicker ( example you have installed taskiller than you look in widget page 3 taskiller option, whit this app you look only 1 option and after you push taskiller you look just the 3 option )
- Updated livewallpaper
- Ch-tw lang move back this build.
- Gallery3D removed
- QuickPic added
- Youtube removed, install latest from market
- Minor audio optimizing
- BT update
- Gps settings edited
- Improved performance - Optimizing this build to 528 mhz without oc and turbo! but you can use if you want
- Init.d support fully working!!! ( i look that all before version has a bug now its full ok. ) Advanced users modify system/etc/init.d/*!
- Lots of battery work
- 3D updated driver from hero and all library for this from latest CM7 from my skate.
- Minor app and game crash work but its not fully working :/
-
Recovery:
- Updated latest su configurations for root and superuser app!
- Dalvik move back data partitions, more stability for app and game.
- minor smooth optimizing
- init.d support fix
IceBread V0.3
Change Log
- Few settings change in build source: Original setting now: enabled nonmarket apps, autobrightness mod.
- Repaired Energy widget bugs from V0.2
- Settings apk its reripped very smooth now.
- Development app its fixed.
- Mediaprovider updated.
- Few app move to /data/app partition. its all apk like deodex version but you can add odexed version too.
- Added Beats Audio support for me its omg with headset if you want i added to build my coca-cola ringtones it has very good bass with this mode and clear.
- Few system app are reripped for better speed.
- Audiopara.csv change to blackstone-test2
- Few another performance tweak.
- Apps and games now its likely IceBread V0.3.
- Native app2sd works, dont need move back to phone any apk.
- Another maps progress so i removed from build, now you can download the latest from market and you have landscape support too
- Removed Superuser app, it has bug but root fully working. without any problem
IceBread V0.2
Change Log
- Audio fully fixed, headset etc..
- Updated G-sensor little faster now.
- Themes fixes Volume & download bar music bar and few minor
- 3D library updated and 3D client are updated!!!
- Music - mp3 fixed
- Added All Battery mod from CM7
- Added FuguMOD
- Native app2sd fixed - dont need move back apps or games to phone you can install from sdcard no problem.
- Removed lots of language.
- Market changed to old version, need speed
- Maps changed better speed, landscape support
- Minor fixing
- Another root work
- BT update
IceBread V0.1
Change Log
- First release
- Odex-ed build, ALL system app optimized!
- Faster dalvik cache funkcion!
- Dalvik cache move cache partition
- Faster boot time
- Added new ril
- 3D work
- Improved app opening speed
- Tweaked phone,contacts, mms, and lot of app for better opening speed!
- Improved speed
- Tweaked build.prop
- Tweaked all system app
- Tweaked Framework-res
- Added system/etc/init.d support
- Camera tweaked
- Youtube tweaked
- Added ICS theme lot if app, latinIme too very nice
- Added ICS bootanimation
- Added ICS audio files
- Added ICS Fonts
- many more
Recovery:
This is Neopeek 1.9 and TiaCWM and XDA mixed recovery so latest with my trick and init edited.
- Optimized init.
- Added auto mount support that you dont have any bug with all ext partition format!
- Smooth increase
- Added better look few info at boot.
- HTC themed neopeek edition cwm.
- Dalvik cache move cache partition!!!
- Added to All startup with the new midnight offset!
- many more
Downloads
Downloads
Here is my link, where you find it soon all my work + stuff ( Flashplayer etc ) in one place, nand / sd too
Other device users, if you have any problem with call audio or simple native audio you only need replace this 3 files: libaudio.so,libaudiopolicy.so and libhtc-acoustic.so from IceBread V0.1 to currently V0.X build and after you should be fixed on your device!
2012.03.26 little update:
IceBread-Zipalign-support.zip
just rename to update.zip and flash via recovery.
after with all boot you have zipaligned all apk in system/app & data/app folder !
2012.03.13 IceBread v0.4
Repaired Gapps
( 1740 downloads uhhh thanks guys , donations 3 )
Build: update-IceBread-V0.4-repaired.zip
Npkboot: -- npkboot-from-fagyi-2012.03.12.zip
________________________________________
2012.03.05 IceBread v0.3
( 402 downloads, donations 2 )
Build : IceBread V0.3-ODEXED
Npkboot: use from V0.2 link.
Old Market: Old Market
________________________________________
2012.03.01 IceBread v0.2
( 684 downloads, donations 0 )
Build: IceBread-V0.2
npkboot: Npkboot-modified-fagyi
________________________________________
2012.02.19 IceBread v0.1
( 542 downloads, donations 0 )
Full Pack : IceBread-V0.1.zip
Tricks
Few info for progress from Future! V0.2 , V0.3 etc
- Fixing vold configuration ( native usb )
- Adding Full RTL support farsi arabic etc.
- Network searching error fixing from cm nightly
- maybe better 3D
- Loading bar ICS theme
- Bluetooth (can be paired but cannot be heard)
- 10 Scrollable Power Widgets in notification bar ( port )! (bugs in V0.2 not ready yet )
---------------------------------------------------------------------------------------------------
- remove nonuse lang ( done in V0.2 : now its only has the build: cz,de,en,es,fr,hu,it,nl,pl,tr,ru )
- Volume control ICS theme ( fixed in V0.2 )
- Add FuguMOD for better speed & responsive ( added in V0.2 )
- Speaker Phone ( fixed in V0.2 )
- Music (cannot find mp3 on the card) ( fixed in V0.2 )
- Headphone (headphone inserted still sound on the speaker) ( fixed in V0.2)
_______________________________________________________________________________________
Bugs in V0.1
- Network searching funkcion = sim error
- Bluetooth (can be paired but cannot be heard)
- Speaker Phone - fixed in V0.2
- Music (cannot find mp3 on the card) - fixed in V0.2
- Headphone (headphone inserted still sound on the speaker) - fixed in V0.2
Bugs in V0.2
- Network searching funkcion = sim error
- Root permission ( fixing fully 1 -2 days )
waiting for you!
reserved
Excelente Rom
Great work
Theres is a new NAND rom ???
is better if is NAND rom to replace win mobile
make a new NAND rom please
thanks
masrterk said:
Excelente Rom
Great work
Theres is a new NAND rom ???
is better if is NAND rom to replace win mobile
make a new NAND rom please
thanks
Click to expand...
Click to collapse
I will post the nand rom later.
please hit the thanks button
Hi,
great job. Today I use a Desire S, but it will be cool to use my old Touch HD with Android.
I managed to install the NAND-Version 0.2.
The only bug I found so far is, the device doesn't shut down. The only way to reboot or shut down is the reset-button or remove the battery.
I want to change to 0.7, but how can I update from 0.2 NAND? I formated the SD-card as you said, but I cannot run "haret.exe" from Android (using TotalCommander for Android).
I tried to update via CWM, but then the device stuck during boot.
Any way to update from 0.2 NAND to this 0.7? Or maybe an NAND-Version of 0.7?
Hello!
V0.7 its that sd built which is needed Windows mobile 6.1 + my modded V6 SD kernel, if you want sound without shutter every 10 sec, + best speed on blackstone / posting soon on xda too /
Dualboot from android doesnt work/released/developed for this device.
Flash one wm6.1 and after ran the haret if sdcard ready!
Tapatalk 2-vel küldve az én Skate-ről
fagyi said:
Hello!
V0.7 its that sd built which is needed Windows mobile 6.1 + my modded V6 SD kernel, if you want sound without shutter every 10 sec, + best speed on blackstone / posting soon on xda too /
Dualboot from android doesnt work/released/developed for this device.
Flash one wm6.1 and after ran the haret if sdcard ready!
Tapatalk 2-vel küldve az én Skate-ről
Click to expand...
Click to collapse
Maybe a dumb question, but how can I flash back zu wm after I installed Android?
The BlackstoneAdvancedRUU.exe doesn't connect to the device, even in TriColor-Mode.....
Can I use fastboot to flash the nbh?
Solution:
rename the nbh-file to BLACIMG.NBH and put in on the sd-card and then boot into TriColor to flash it.
Darkwing^V^ said:
Maybe a dumb question, but how can I flash back zu wm after I installed Android?
The BlackstoneAdvancedRUU.exe doesn't connect to the device, even in TriColor-Mode.....
Can I use fastboot to flash the nbh?
Solution:
rename the nbh-file to BLACIMG.NBH and put in on the sd-card and then boot into TriColor to flash it.
Click to expand...
Click to collapse
exactly
I downloaded the 0.7 build and followed the instructions up to getting into Recovery. Once in, I can move up/down but I cannot select any of the items. I found that I have to use the call buttons for that but they are not working. Ideas?
[Edit] Somehow, after pushing and pressing the power button several times, it went from switching the recovery screen on/off to working as a button. Continuing with the installation...
you must vol up, down, up after entering recovery to enable power button
mfsr98 said:
you must vol up, down, up after entering recovery to enable power button
Click to expand...
Click to collapse
Maybe you should add the "up-down-up"-part to the instructions.....
its there dude!
So, after playing around some while I can say: This ROM works realy good. It's fast an stable and I didn't find big flaws!
I didn't test the front-cam, but the back-cam works with pic and video.
Sometimes the wifi stops, but it starts again after a few seconds. Maybe I should update the radio?
I also managed to install a low-res version of Teeter, so the G-sensor is working well, too.
It would be great, if I can replace the wm completely and install 0.7 via NAND, but the SD-version is ok for now.
Thanks to all, who build this fine pice of work!
Darkwing^V^ said:
So, after playing around some while I can say: This ROM works realy good. It's fast an stable and I didn't find big flaws!
I didn't test the front-cam, but the back-cam works with pic and video.
Sometimes the wifi stops, but it starts again after a few seconds. Maybe I should update the radio?
I also managed to install a low-res version of Teeter, so the G-sensor is working well, too.
It would be great, if I can replace the wm completely and install 0.7 via NAND, but the SD-version is ok for now.
Thanks to all, who build this fine pice of work!
Click to expand...
Click to collapse
front camera doesnt work...
Radio as nothing to do with android on this device, sometimes it happens :/
Good news games are working!
mfsr98 said:
front camera doesnt work...
Radio as nothing to do with android on this device, sometimes it happens :/
Good news games are working!
Click to expand...
Click to collapse
There are more bugs....
If I put files on the SD-card via USB, I cannot find them via TotalCommander or OI Filemanager. TotalCommander cannot remount the SD-Card (card is busy). And if I remove the card and plug it in again, the device will freeze as soon as I open another app.
The files are there when I restart the device.
Just install dualmount app and after its fine. Its better for sdbuild than native. If put out the sdcard than where running that Android?
Tapatalk 2-vel küldve az én Skate-ről
hahaha, I LOL'D
Hello everyone!
Perhaps you know me, I'm trying to revive the NANDROID on our beloved HTC Thouch HD, aka Blackstone.
I want to thank to XDAndroid developers team & detule, they create & make it possible/available with pathes on gitorious or others site for the SD kernel source and a GBX tree!
Thank to Arganis31 for the great work on Blackstone LK!!! { LK source, soon on the git from Arganis31 }
Of course deepest of respect to [ACL] for everythings!
And everyone who i forget!!!
Please note :
- I don’t take any responsibility for any damage to your device! So use at your own risk!!!
- My kernel source is here: https://gitorious.org/linux-msm-blac-nand/linux-msm-blac-nand
- Change Log – 2 post ; Install – 3 post
- This is not an official GBX release, rather something I compiled from the current GBX tree.
- This is work in progress, so there may be minor or major problems
- Please attach your getlogs if you have some problem, thank you
Main problem is:
- Shutdown / reboot { just hang on } not working need reset or battery pull out.
- 3D not really good so if i enabled HW3D than i get a blank screen :/ { gralloc or kernel pmem issue??? }
- Any others are working, like SD version or just better.
I am a only who are working on the Blac Nand Kernel & setup the ROM right, Im updating g3rm0 git source with some good stuff, I can say that now i got it a lot of better funkcionality on nand. Nearly everythings updated on source. For example new acoustic code working on nand and audio fully working, with BT audio too!!!
Any help are welcome and thanked If you think that's right.
Downloads: http://code.google.com/p/nandroid-for-htc-blackstone/downloads/list
Necessary files and older downloads : http://www.mediafire.com/?85m45naii6dpk
Big Thank to all my donators: ( included SD/NAND too )
- uberto.costanzo
- wanpaopao
- Drifft Art
- Osiris
- Roland
- Philippe
- Etoxus
- Nick Brown
- Disaster
- William Botteldoorn
- FazZ
- adamph
if i forget anyone from the list, please send a pm me! Thanks
Good luck!
Best regards,
fagyi
Change Log
2013-01-20 Change log
- Synced with the latest source 2013.01.13.
- ICS wallpaper
- JellyBean animations
- JellyBean Clock widget backported
- Videocamera support
- Speed improved
- Battery life improved!
- Tweaked framework-res with some ics stuff ( res tweaks )
- Tweaked system apps with some ics sfuff ( smali & res tweaks )
- Statusbar its transparent. ( smali tweak )
- MBB - MegaBassBeats support - Thank you DeHuMaNiZeD all credit goes to him!
- Haptic feedback disabled by default.
- Enabled non-market app install by default.
- Youtube LQ mode working
- PlayStore fixes | /cache/download linked to /mnt/sdcard/cache-download
- Latest PlayStore and Gmail merged
2012-11-30 Change log from the release
- Synced with the latest source 2012.11.29
- Custom wallpaper
- Custom bootanimation - Thank you Sandmann, all credit goes to him for this.
- Light gapps it was preinstalled, note your market its PlayStore and not updating automatically ( marketupdater removed ) | showed up in the menu when you enable the internet connection & synced with google.
- Some tweak
- Zipaligned
- Native App 2 SD support - Now you really can moving app to the sdcard
- Wifi support - need trick with Sdcard!
- Best speed on NAND
-Wifi FIX with SDCARD inserted-
Confirmed, not only for me worked!
badzed said: ↑
I found a way how to enable wifi with scdard inserted.
1. Remove SD card.
2. Reset your phone.
3. When phone begin boot insert SD card.
-IMPORTANT. Insert SD card BEFORE begin android boot.
-Try insert when you see blue fastboot screen.
4. Turn on WiFi.
Thank you badzed, nice found!!!
Kernel
- Native App 2 SD support
- Wifi support
- Battery update
- Netflix support - ( need for Droidwall, iptable )
2012-10-02
- Synced with the latest google source 2012.09.25.
- Stock Theme
- Gsensor working now
- Battery usage : 9 hr 17 min -> 18 % lost -> sleep mode
- Incoming ringtone working on default. Cyantone ported from ICS and setting up to the default ringtone. I just love this ringtone.
- Audio rebuild to the latest htc-acoustic_wince
- Audio fully working on nand, you need forget the trick / Fixed on kernel with new audio routing!
- Build.prop setup
- Boot.img configurations updated ( big )
- Better overall speed.
- Hardware key vibrating
- Htc One X bootanimation
- Launcher changed to the latest free launcherPro version
- Stripped Gapps
- Zipaligned
- Camera support ( Just photo, no video so far )
- Bluetooth support ( fully working )
- Native a2sd support. - Removed from the Build because with this camera not work.
- Darktremor Apps2SD support ( need ext2 partition on your sdcard )
Kernel
- h2w support ( new headset )
- New acoustic_wince code base and neccessary modification for blackstone - Fully working
- Shutter in music? not anymore
- Added camera support and neccessary drivers - Fully working
- Battery changes for the better life
- Config updated
- BT updates - Fully working
- Clock-wince changes
- Improved shutdown and reboot funkcion. - seems to be need fixes
2012-09-28 – Testing release { got some fixes from the before list but not at all }
Install
You need charging your battery minimum to 70% in Windows Mobile before starting everythings !!!
do not play with less value if you dont know what do you do!!!
* All files ready which you need on downloads place.
Installation guide from Windows Mobile to the Android:
Thanks to FazZ & Nick Brown! Great work!
1. Flash the latest HardSPL from OliNex
2. Extract the 'adb files & fastboot.exe' files to a folder and grab the latest recovery-XY.img from Necessary files and older downloads. Place it in the same older and rename it to recovery.img
3. Format the microSD card fully as FAT32
4. Copy the 'BlacIMG.NBH' file and your selected ROM (zip) you wish to use to the root of the microSD
5. Boot in TriColour mode (Power button and Volume down button)
6. Whilst in the TriColour mode, connect the Blackstone to a USB port ('Serial' should now say 'USB')
7. Run 'BlackstoneRUUAdvanced' and select the 'Task 29' which is full wipe of the Blackstone
8. Once completed, insert the microSD card and reboot into the TriColour mode again
9. The Blackstone will auto-flash-install (after key confirmation) the 'BlacIMG.NBH' on the microSD card
10. The 'BlacIMG.NBH' must NOT be flashed via Windows using the RUU tool (it will only fail)
11. Once flashed with the 'BlacIMG.NBH' it will reboot to a new Fastboot screen (blue background)
Note: the phone won't automatically reboot, you have to reboot it manually
12. After a short time the Blackstone in Fastboot mode with enter a USB connect ready state
13. Now connect the Blackstone to your Windows OS and open a CLi/Command prompt
14. Within CLi go to the directory where you place the 'adb files & fastboot.exe' files (from step 2)
15. Type: fastboot flash recovery recovery.img (this will flash install the custom CWR)
Note: The "recovery.img" file has to be in the same directory as fastboot.exe. It is in the "Necessary Files" download folder of the 1st post.
16. Then type: fastboot boot recovery.img (this will reboot your Blackstone into CWR)
17. In CWR use the Volume keys to move up and down, and the Power button to select
18. First thing to do in the recovery screen is press Volume-Up, Volume-Down, Volume-Up, then you will see a message at the bottom of the screen that says
'Back menu button enabled' , after power button using for the selecting in the menu!
19. You are now finally ready to install your chosen ROM that is on your microSD
20. Once installed, let it reboot into Android OS which takes about 5 minutes on the first run
21. Once the Blackstone has settled within the OS (you can see the typical Android home screen), reboot
22. This time round, it should only take about a minute to start and you can now start using you NAND ROM
Installation guide from before versions or another Android to the New Android:
1. You need make one reboot and pressing power key on fastboot screen - this will booting your Blackstone into CWR)
2. In CWR use the Volume keys to move up and down, and the Power button to select
3. First thing to do in the recovery screen is press Volume-Up, Volume-Down, Volume-Up, then you will see a message at the bottom of the screen that says
'Back menu button enabled' , after power button using for the selecting in the menu!
4. You are now go to mounts & storage option and format boot and system partitions
5. Back to the Main options in CWR and make one wipe data/factory reset!
6. You are now finally ready to install your chosen ROM that is on your microSD
7. Once installed, let it reboot into Android OS which takes about 5 minutes on the first run
8. Once the Blackstone has settled within the OS (you can see the typical Android home screen), reboot
9. This time round, it should only take about a minute to start and you can now start using you NAND ROM
Reserved for the future
--------- Reserved ---------
Hey, i dont want to be ungrateful, youre doing a great job, but the most important fact is to get wifi working, without wifi there is nearly no sense for android...
thanks for your work
Hi, the installation is to complecated for me (for the moment) (also beacause I'm a french speaker). So as soon as it will be easier for me to understand, i'll try it.
Thank you for bringing balckstone back to live. Keep going.
Use the thanks button.
Thanks
great Rom
If necessary i could help translate into german/french
Thx Fagyi
work great than the others roms.
^^
test it since yesterday..
everything is ok, but my ram is very low.
maybe the next rom from Fagyi be better again.
i'm waiting for it.
sorry for my english...
thx Fagyi :good:
After leaving my Blackstone sitting in the dark for quite some time, I think it's time to take it out and flash something new.
Good job OP. But as mentioned, wifi is the most urgent stuff to be fixed. If you need testers I would gladly help, just pm me
he's trying... It's really hard you know
boot.img install
Hi,
Giving your ROM a try. All installed well and Android came up OK. My only question is about the boot.img installation. How do I install it and what does it do?
If android is running, your boot.img is installed (boot.img is included in the flashable .zip
btw, you dont have blackstone on your sig... this is only for blackstones!
---------- Post added at 02:50 PM ---------- Previous post was at 02:50 PM ----------
oh, and boot.img is the kernel
mfsr98 said:
If android is running, your boot.img is installed (boot.img is included in the flashable .zip
btw, you dont have blackstone on your sig... this is only for blackstones!
---------- Post added at 02:50 PM ---------- Previous post was at 02:50 PM ----------
oh, and boot.img is the kernel
Click to expand...
Click to collapse
Thanks, that's what I thought but just wanted to make sure.
My blackstone isn't in my sig because it is my "play" device. But if this ROM is stable and can be used as my regular phone, I may finally replace my Rhod210 running WM6.5 and make that one my play phone.
This ROM is stable, a lot faster than SD ROMs and as some functions that even work better than on SD! (like bluetooth) If you can survive w/o wifi, you're good to go!
mfsr98 said:
This ROM is stable, a lot faster than SD ROMs and as some functions that even work better than on SD! (like bluetooth) If you can survive w/o wifi, you're good to go!
Click to expand...
Click to collapse
Wifi is good to have, but I can live without it if I must. BT, GPS, phone & battery life are crucial to me for navigation and music in my car so if those 2 work and 3G, I can give it a real try.
then yes, you are good to go
the only thing that can go wrong is battery life but try it out and see for yourself.
mfsr98 said:
then yes, you are good to go
the only thing that can go wrong is battery life but try it out and see for yourself.
Click to expand...
Click to collapse
Well, now that it is up and running, I'll reinstall via Titanium from my Rhodium all my apps and give it a good run. Hopefully, I'll be back in a few days with GREAT reports!!!:fingers-crossed:
good luck
Translated Link:
http://translate.google.de/translat...dex.php?showtopic=479224&st=120#entry23833639
Original Link:
http://4pda.ru/forum/index.php?showtopic=479224&st=120#entry23833639
- Based on China Unicom version of the official EmotionUI latest upgrade package B115 production, complete ROM production
- Streamlining of the system most of the unwanted programs, such as promotion of operators, telecom customized help and other procedures, reducing the ROM size, reduced memory footprint
- Added full ROOT permissions
- Use SuperSU latest version 1.41 as a super administrative privileges
- Updated Busybox and su binary file
- Streamlined out CUST in music and video, as well as unwanted pictures
- Optimization of the system program zipling further optimize the system memory usage
- Turn on call recording function (call will see more options click the record button)
- Modify Call (millet calls) as well as the alarm tone (Secret Garden)
- Open Theme Manager Online Themes Gallery
- Adjust the boot order of the default desktop icons
- Added new ATX Advanced Settings v0.3, see the following detailed description
- Fix the previous user swipes down notification bar after losing control of the problem (if there are questions, please timely feedback to me)
- To join the list of animation from mokeeos can turn off the ATX advanced settings and effects replacement
- Set up by adding the Quick Start option, Huawei's 5 seconds boot function, the first boot enabled by default
- Join ZTE screen assistant tool, open your own needs
- According to contest requirements, join the ING market, potatoes video client, the brush into the back, in the case of open networking for me a moment to complete the entry support
The new ATX v0.3 Advanced Settings
- Support the on / off status bar shows the percentage of power
- Support on / off GSM network crack (reboot to take effect) - Telecom Edition exclusive
- Support your lock screen is turned on / off mobile data connection
- To support the boot Mute
- Support Huawei and Google lock screen lock screen toggle native
- Support for the user to streamline Google Services Framework, reducing memory footprint (first start Google Framework installed by default)
- Join the engineering mode Quick Entry
- To join the list of super brightly animated, animation effects can define, can also be self-closing
Click to expand...
Click to collapse
Instuctions:
http://translate.google.de/translat...index.php?showtopic=479224&st=0#entry23399079
Anyone tried?
I think it cant work with closed BL and without working fastboot commands?! (the install script inside the package just use fastboot commands to flash)
the language seems to be Russian on that ROM
Ruchira88 said:
the language seems to be Russian on that ROM
Click to expand...
Click to collapse
This custom ROM taked from china forum.
I installed that some time ago ... from the russian board and it worked ... but as it had no informations bar, I went back to B107
Can anyone port "ATX v0.3 Advanced Settings" as an apk from the rom?
Edit: Found the APK from the rom but it fails to install.
Edit2: Tried sideloading it into system/apps/, but it does not appear in launcher drawer, any help?
List of Chinese custom Roms: http://cn.club.vmall.com/forum.php?mod=viewthread&tid=199781&extra=&page=1&mobile=yes
tauio111 said:
Can anyone port "ATX v0.3 Advanced Settings" as an apk from the rom?
Edit: Found the APK from the rom but it fails to install.
Edit2: Tried sideloading it into system/apps/, but it does not appear in launcher drawer, any help?
Click to expand...
Click to collapse
Have you actually tried the ROM itself ? Just curious, it seems interesting and I may give it a try.
Otherwise sorry but can not help with the apk.
LL13-
No, I have not tried this ROM, since I've had this phone for 2 weeks only. I usually wait a few months before flashing a custom rom. ATX advanced settings are what I'm only curious about in that rom, because it has an ability to disable the huawei lockscreen and use the AOSP one instead.
Basic Introduction ROM Name [M-ROM] [6.0] [Unlock] [Single & Dual] XM_Z3 + | Attribution Enhancement | Blocking Run | Themes Switch | v1.7 Android Version 6.0.1-32.2.A.0.305 Adapter Xperia Z3 + ROM Author Call me Ma Shao (machao44) ROM Feedback Group 331452608 Published 2016/10/27 Forum support http://bbs.gfan.com/forum-1627-type-12128.html ROM Introduction [Firmware]
Based on 6.0.1-32.2.A.0.305
Brush script
Z and X dual-style optional (Z theme modified adaptation of the new app)
Change caller information Call vibration and microblogging are optional
Join xposed-v86-sdk23-arm64 optional
SmarTemperatureX temperature control patch optional
Kernel
DRM patches
Disable RIC
TWRP 3.0.2
Busybox
The SELinux status is changed to PERMISSIVE
【system】
SuperSU v2.76
Brush optional streamlined content
Lightweight streamlined
Modify the settings wizard, remove the card wifi and card google can not next question
Crack the system signature
Replace wifi authentication for g.cn no longer has an exclamation mark
Replace most Xperia X programs
Add Xperia X Smart Cleanup
Replace the Sony e-mail messages that are supported by Exchange
Long press the multi-task key to hide the virtual key, on the slide out (and drop-down immersive mode, the input method will not dislocation)
Update section app (10.24)
Home Screening Online search and suggestions
XZ Bank configuration data
XZ Country Bank Setup Wizard
Global light-dark switching theme (setting - display)
System to prevent the running patch (no X framework, brush machine restart after a can be used)
【call】
Call interface to add attribution to show (declined to extract 2 times to publish and package)
Caller pop-up window to add attribution to show (declined to extract 2 times release and packaging)
Add call recording (recording is complete in the call details)
【Contacts】
Recent calls add attribution to show (declined to extract 2 times to publish and package)
Call details add attribution display (declined to extract 2 times to publish and package)
【SMS】
Information list to add attribution to show (declined to extract 2 release and packaging)
【set up】
Skip menu
Level 1 menu comments
XZ STAMINA Power saving mode
Navigation bar height size adjustment (set-up display)
Volume key function (Setup - beep and notification)
Font replacement function (setting - display)
Extended Desktop (Settings - Display)
LCD Density (Setting - Display)
【Status Bar】
Port Xperia X's SystemUI
Add extended mode, screenshots, mobile data
Add Detect USB Devices, Throw
Z original SystemUI also joined the above functions (correction signal spacing)
Multi-tasking interface Add an application lock
Suspended small plug-in regression
Down to add system data
Replace the drop-down screen shot icon
Clock Style Options (Settings - Display)
Net speed display (setting - display)
Turn split-screen mode on (setting - developer, unmodified build.)
【Sound】
Replace the Xperia X sound driver
Increase the volume by 1 grid
Update the XZ sound data
【other】
Replace the Xperia X ringtone
Replace Xperia X boot animation
Replace the Xperia X / XZ theme
The default built-in wallpaper is replaced by the default Xperia wallpaper
Some of the interface modified to Xperia X style
Thanks (in alphabetical order)
@ Tobias.waldvogel
@ Zxz0O0
@serajr
@nailyk
@ Xiao1u
@CyanogenMod
@DirtyUnicorns
@lyd
@sudamod
@Aicp
@Lewa
@IgorEisberg
@resurrectionRemix
@Tesla
@mokee
@tencent brush machine process
ROM brush to write tutorial
Download the Brush Pack to copy to the internal memory card or external SD card
(Remember to backup personal data) Brush step: click: Install ROM package to find the package according to the ROM package according to their own Requirements to choose to wait for the brush machine restart
carry out
The above is for reference only
**ROM screenshot preview
ROM download address
ROM download address
Hide the contents of this post
MOD EDIT by @gregbradley Download links removed @bunleng638 please read PMS
**Precautions
Please read the post and then brush machine
ROM after testing the release of personal brush machine problems due to the consequences of not bear built-in promotional software, please run under the support of the author can then be retained can also be uninstalled (promotion app in the system / app, tg at the beginning)
Prohibit the second amendment to the individual published reprint and extract content please specify thank you for all supported oil
How to install
Bootloader Unlocked
Required Account Pan.baidu
Flash TWRP 3.0.2 on XDA
Wipe Click in TWRP Tick System / Data / Cache / Davik cache
Flash Rom.zip
Choose everything that you want or favorite
Enjoy Xperia XZ UI
this is Chinese bro i cant understand anything
pou_gh2 said:
this is Chinese bro i cant understand anything
Click to expand...
Click to collapse
Link for Single Sim: http://pan.baidu.com/s/1i5I31sh Password: 7e1v
Link for Dual Sim: http://pan.baidu.com/s/1bHL5CE Password：baso
It's easy just follow this link and type password after install with TWRP 3.0.2 on xda already reboot into recovery vol+ afew click when sony logo so after u need click before wipe system data cache davik cache in twrp already install it follows like aroma install choose what that want or favorite Yes u can change your language too enjoy Thx for cmt
bunleng638 said:
Link for Single Sim: http://pan.baidu.com/s/1i5I31sh Password: 7e1v
Link for Dual Sim: http://pan.baidu.com/s/1bHL5CE Password：baso
It's easy just follow this link and type password after install with TWRP 3.0.2 on xda already reboot into recovery vol+ afew click when sony logo so after u need click before wipe system data cache davik cache in twrp already install it follows like aroma install choose what that want or favorite Thx for cmt
Click to expand...
Click to collapse
ty but what is this upload center bro?suddenly links are not working and when i typed the password there was the rom but not downloadable because when i pressed the link down that,some other things showed up,i am really confused:laugh::laugh:
follow via attached file downloadeding.zip
bunleng638 said:
follow via attached file downloadeding.zip
Click to expand...
Click to collapse
my friend,my bro,sir,i tried orange link and it forced me to dl an app,it brought me signing up page but i can not read 1word! i say again orange link has an app and for you that already signed up it brings downloading i guess??????
@bunleng638
Bro, did you read XDA rules before?
Copy and Translate on Google it's not tired if try website Chinese it's like this
Hmm for the rom i was installed it's good everything work well like XZ and can click hide or not nav bar too have SmarTemperatureX cooler your snapdragon 810 too it's not hot like most 70%
Cant download need badiu account keeps sending me 2 download badiu installer, i did like the screenshots showed me.
Just type pass after give download pan.baidu.apk cloud and signup account after auto download ok
Google play store keeps crashing, anyway to fix this? Cant download apps
Wipe all but don't wipe sdcard & internal after install again
can anyone download this rom upload in another server because pan.baidu need chinese number
Password top down of link and sign up with baidu
cant sign up because baidu need chinese number to sing up
I was sign up already and downloaded and installed already so you need patient to try
bunleng638 said:
Wipe all but don't wipe sdcard & internal after install again
Click to expand...
Click to collapse
still dosnt work
Kungencortes said:
Google play store keeps crashing, anyway to fix this? Cant download apps
Click to expand...
Click to collapse
I do not see Google play store and keyboard
Thread closed
@bunleng638 read your PMs