Is anyone using the latest version of SixAxis Controller on their GNex with a Nightly of CM11 built in the last 2 or 3 months?
It was only after a long time after finally upgrading to CM11 that I noticed some weirdness that sort of makes SixAxis Controller unusable for me with a lot of things.
Basically, in Preferences, if I have either "Gamepad Settings > Enable Gamepad" or "Keyboard Emulation > Bypass IME" set, there is a -huge- delay between D-Pad/button presses, and them actually registering in anything...plus, the direction/button needs to actually be held down for a little over a second to actually register...or it needs to be rapidly tapped. If I just press and release something once, it never registers. The thing is, with Enable Gamepad checked, the analog sticks work as they should, with 0 delay or other weirdness.
If I leave both of those options unchecked (so it's just using the SixAxis IME to send keyboard keys and buttons), that works totally fine in everything I tried. The problem with that though is that there's no way to use the analog sticks that way to have them act like actual analog sticks...you can just have each direction mapped to send a key/button.
I've uninstalled/reinstalled the app...wiped the settings...reset the controller and re-paired it...tried a 2nd controller that I've used earlier with no problem...none of this has fixed it, and it still acts as described above
Well, after trying an X360 controller over OTG, and then serveral PC gamepads over OTG, I found out the problem wasn't just with the PS3 setup. I was getting the same weird button lag/need-to-hold behavior with -any- gamepad setup that wasn't piping keyboard keys through an IME.
So, I spent the day backing up, wiping, and flashing my Galaxy Nexus to see if the problem was ROM-level or what, and...the problem was gone...so I spent the rest of the day restoring, disabling, and tracking down just exactly what I had done to break it in the first place.
The problem ended up being: the 'Xposed Additions' module available for Xposed Framework. It has some hardware button-remapping functionality that seems to have been interfering with any sort of native gamepad button presses here, even though I wasn't using any of the remapping options.:silly:
Related
Here it is! This game hasn't been out for a week yet. You always have to be on WI-FI to play it even on single player.
Move to data\com.dancingpixelstudios.sixaxiscontroller\profiles It' doesn't matter whether it's on your SD card or phone storage.
View attachment 2874094
TylerMarshall256 said:
Here it is! This game hasn't been out for a week yet. You always have to be on WI-FI to play it even on single player.
Move to data\com.dancingpixelstudios.sixaxiscontroller\profiles It' doesn't matter whether it's on your SD card or phone storage.
View attachment 2874094
Click to expand...
Click to collapse
Doesn't work the file is mt. Wtf?
This is the only way to map mc5. You need to set up two separate profiles for mc5 and set up a toggle to switch between the two during gameplay. Does work good but nowhere as good as mapping mc4. Bit it does work better than using native at this time unless Gameloft fixes it's problems then I might go back to native.
https://www.dropbox.com/s/t46d1imtowrglef/mc5 profile 1.map
https://www.dropbox.com/s/8kkqcwm4d9s1c9k/mc5 profile 2.map
Why are the 2 profiles important?
I have 1 profile for the game and navigate menu with the mouse emulation in Six Axis app.
A bug I found is making a swipe on weapons icon (to switch weapons) makes the screen jitter slightly
like a centre screen swipe, its strange. Tried many ways to change swipe distance, button, no fix yet.
And could we set 2 profiles like this:
1 is the generic moga stye (too navigate through the games menu)
2 when in game, switch too the custom touch emulated profile. With select.
Will try this actually.
EDIT: tried this method in Sixaxis, every time i make the switch to profile 2 (touch emulation) I get a message (controller disconnected)
This is every time so I just left it.
Sent From V500
Using XDA App
How you reverse this process.
I want to use touch sometimes but i cant. Pleae tell me how you reverse this process since i want to use touch when i am outside usually.
Hi,
According the instruction of aftvnews, I rooted my aftv. everything looks normal except the remote, since that, the remote gets sensitive. sometimes It will go forward quickly.
what about yours? How can I adjust the remote?
thanks
This happened to me a few weeks ago for a brief period randomly, but only in kodi/spmc. It seem to have corrected itself after a day or two.
Maybe try updating the remote control firmware if you haven't already. There's a guide on this at aftvnews.
Failing that, maybe also try to unpair then re-pair the remote. I know with bluetooth devices generally, this can sometrimes help fix odd issues.
So im not all that tech, savvy. i have tried downloading the settings apk but any time i click on anything it just goes away. I have tried to pair it through the settings / other bluetooth but it doesnt see it... im doing something dumb what is it?
Alicart said:
So im not all that tech, savvy. i have tried downloading the settings apk but any time i click on anything it just goes away. I have tried to pair it through the settings / other bluetooth but it doesnt see it... im doing something dumb what is it?
Click to expand...
Click to collapse
Don't click on anything in the settings app. The default is bluetooth on. I used the other/upper toggle and remote control would no stopped working. Thought FS was bricked.
Search for other bluetooth devices, I held the FN and F1 keys, and selected with the stock remote. Worked on 2 different FS. The pointer arrow is a small circle. " Ultimate 3 button Wheel Mouse Mod. for KODI v16 IPTV and LiveTV" http://ftazeta.com/kodi-xbmc/84586-ultimate-3-button-wheel-mouse-mod-kodi- iptv-livetv.html#post484131 You can use the mouse.xml (v105) to make the keyboard essential. You can even have a volume control where Firestick has none.
on the firestick i had it searching for bluetooth devices, on the controller i pressed fn and f1 and had the blue light blinking. the stick never found the device. i bought two of these for two different firesticks and neither one works.... is this not a bluetooth controller? 2.4g i thought was.
try turning USB debugging off.
Sent from my SM-G920V using Tapatalk
I believe I am probably having the same problem with an iPazzPort KP-810-30P keyboard for the fire stick I am trying to use. I install the settings.apk
easily enough but when I am actually in settings, anything I select forces the app to crash. I read somewhere that resetting the fire stick to factory
settings would get it to work but it hasn't. Is there some reason the settings app keeps crashing? All the videos and help I see are from 2 years ago,
so is there some type of conflict with the newest fire stick that won't allow this app to work?
I’m not sure what exactly was “optimized,” but I (using mouse toggle) clicked the power optimizer and upon resetting my fire stick 2 automatically, I can’t pair my remote or WiFi to it. I’ve tried new batteries and I’ve tried holding down home for 60 seconds, select for 60 seconds, and even both for 60 seconds. I also tried 5-10 seconds, keeping them right next to the receiver. I apologize if there’s an easy fix for this but I’ve been looking possibl solutions up for a couple days and I’m out of ideas
Ditto...
I feel your pain — literally. I’ve spent 16+ hours since yesterday when my dreaded Kill All Apps ”clickedy-click” happened. I had an empathetic chuckle as I just came across your post during my umpteenth Google/XDA/Reddit search.. So, decided to join XDA [though been a fly for yrs here] just to say I’m afraid we’re outta luck & hardly alone. I can’t recall which app killer that did me in as I downloaded 3-4 of them from Aptoid to test out — though I think it was ATK? Thought I was “safe” since it’s not rooted and I’ve used similar apps without issue on several rooted phones over the yrs, but... hard lesson learned.
My issue is neither of my remotes (FS1 & 2) will pair, nor will any remote control apps for my droid, iPad, or Amazon Fire though this seems a fix for many, so might wanna give it a shot? I even dropped my Router (Xfinity- Arris) security — stick is still a no show, no ping.
Oh well, off to setup the ol’ 1st gen stick. Though I can’t blame Agenda 21/30, err, I mean Amazon, for this, after hrs of researching the “issues” I’m not so sure there’ll be a 3rd always-listening Alexa device in my collection...
Just a thought, have you tried connecting a OTG cable to the fire stick to add keyboard or mouse support?
Hello, I have been having an issue with game controllers and my Fold 4. Phone is good in all regards except game controller connections. I have factory reset twice (with the most recent at the same time as UI 5.1 dropped). This whole time I assumed it was Bluetooth lag until I decided to try some testing just to realize it doesn't matter if it's wireless or wired directly into the phone. This issue happens most notably when I am pressing the facing buttons like Y, X, A, and B. I am not talking about mashing the buttons either just regular attack speed for a retro beat em up game. It leaves any game unplayable due to missed inputs. I tested this wired with 8Bitdo Pro 2 controller and a PS5 controller, they all act the same as the wireless Nacon MGX Pro.
Worst of all I just tested the Nacon MGX Pro wirelessly on an old Samsung Tablet S6 and it works just great. To think upgrading to this flagship phone when my last Note 21 ultra never had this problem.
I am attaching a video capture of the Nacon wirelessly connected and the Pro 2 Plugged in. I am pressing the buttons at the same tempo as the Right dpad button in the beginning.
Please I can use any help.
Hey !
I have the MGX Pro as well but don't have this issue.
I use it for xCloud mostly.
Update, I tried turning any and all accessibility options off and I noticed something interesting. An option called bounce keys was on, it's a delay from a second press of the same button. The phone just had a fresh factory wipe and this was enabled . Turned that off and other accessibility options and games where playable. I don't know if it was another option bug but I believe "bounce key" option was the culprit.