Lg P930 LTE I bricked my phone?
hi guys
i tried to flash my p930 but now I'm stacked with "LG Optimus LTE" custom logo. When i use KDZ_FW_UPD.exe i always have the same error line in the program like
Model Dll Msg Not found2004,
my problem is i don't have any original backup
can you help me guys?
thanks
sorry for my english
i tried this method
"" Please try KDZ_FW_UPD.exe instead of UpTestEX_mod2_marwin.exe.
1)install the software below:
msxml.msi
LGUnitedMobileDriver_S4981MAN36AP22_ML_WHQL_Ver_3. 6.exe
B2CAppSetup.exe (This one will automatically run LG updating after installation)
2)Quit LG updating program.
3)Run "Windows Enabler.exe", a small icon will display on your computer's right-bottom corner,click it, it will enable KDZ_FW_UPD.exe's buttons.
4)Press volume+ and power botton when you phone is off to enter "Download Mode", connect the phone with your computer.
Run KDZ_FW_UPD.exe, Choose:
type:3GQCT
phonemode:CS_EMERGENCY
and select your rom:LU620128_00.kdz (version 128 rom)
Click "launch software update"
Flash begins, please be patient, your phone will automatically reboot when the progress reaches 94, then shortly, it will reach 100, all done."
I don't understand why you guys keep using the LU6200 kdz to try to unbrick your P930 or where you're finding the forum post that is telling you to do this, but it is not meant for our phone. In fact, it is probably what is ****ing up your phones. There is literally only one good unbricking guide for the P930 and it's right here on the front page in LG Nitro General Discussion by Machzelet. It's an updated version of my old unbricking guide that doesn't work anymore due to updates to the LG update tool. You might have permabricked your phone unless you can still get into download mode. I suggest reading the whole thread I just linked you to and don't even follow the first post. Find the posts about the Nitro .TOT file and the LG flasher tool and see if you can flash yourself back to a working phone that way. If you have any questions, ask them in that thread. Having 100 different unbricking threads isn't helpful.
Malnilion said:
I don't understand why you guys keep using the LU6200 kdz to try to unbrick your P930 or where you're finding the forum post that is telling you to do this, but it is not meant for our phone. In fact, it is probably what is ****ing up your phones. There is literally only one good unbricking guide for the P930 and it's right here on the front page in LG Nitro General Discussion by Machzelet. It's an updated version of my old unbricking guide that doesn't work anymore due to updates to the LG update tool. You might have permabricked your phone unless you can still get into download mode. I suggest reading the whole thread I just linked you to and don't even follow the first post. Find the posts about the Nitro .TOT file and the LG flasher tool and see if you can flash yourself back to a working phone that way. If you have any questions, ask them in that thread. Having 100 different unbricking threads isn't helpful.
Click to expand...
Click to collapse
i can entry in download mode
I followed all the step from guide
everthing was ok ok but the phone is still stucked with the logo
i'll atache the logo file also lg logo. jpg
thanks
please tell me what i'm doing wrong. maybe because the batteryy is almoust empty? but even with a power cable is the same thing
maybe it's for cdma version?
because mine is gsm from bell canada
SOLVED
thanks to Malnilion , Machzelet , jainanshal
my phone it's alive again
I'm very happy
Great news! Now install ClockworkMod from Rom Manager if you plan on doing any more crazy stuff to your phone lol
Hi there guys searched around and relaly dont see a similiar problem I am having and any help would be appreciated. So I flashed the ics leak forthe unrooted v ersion of my att&t nitro that worked fine(its the exact same one as hono's but for unrooted roms) Anyways now that att official is coming out I wish to downgrade back to a stock rom so it will update to official. problem is during the unbrick method as its at some points in broken english(not a dis) just saying can get a bit confusing.
So I get to the step where the lg tool is updating and reboots phone and phone is back on and we are at about 93 percent that the problem occurs. the program(lg tool) says that there is a problem with the usb connection to the phone communicating please pull out usb remove battery and turn phone back on and hit restart ive tried that and still gets to same point to eventually program gives up and say exit.
ive reinstalled teh shttp server and all the tools redownloaded the linked kdz file etc...cant i just flash the official att rom since im not actually bricked. or is it better to dowgrade and redo it how i am trying to do now. Any hlep is appreciated seems as newer phones come out things get more confusing then easier
talrune said:
Hi there guys searched around and relaly dont see a similiar problem I am having and any help would be appreciated. So I flashed the ics leak forthe unrooted v ersion of my att&t nitro that worked fine(its the exact same one as hono's but for unrooted roms) Anyways now that att official is coming out I wish to downgrade back to a stock rom so it will update to official. problem is during the unbrick method as its at some points in broken english(not a dis) just saying can get a bit confusing.
So I get to the step where the lg tool is updating and reboots phone and phone is back on and we are at about 93 percent that the problem occurs. the program(lg tool) says that there is a problem with the usb connection to the phone communicating please pull out usb remove battery and turn phone back on and hit restart ive tried that and still gets to same point to eventually program gives up and say exit.
ive reinstalled teh shttp server and all the tools redownloaded the linked kdz file etc...cant i just flash the official att rom since im not actually bricked. or is it better to dowgrade and redo it how i am trying to do now. Any hlep is appreciated seems as newer phones come out things get more confusing then easier
Click to expand...
Click to collapse
i recommend you to use the original data cable that came alongwith the phone package and the usb ports at the back of the pc !
do this and try again !
yeah I am using the data cable that came with it and using the usb ports on back of pc. also i assume I cannot access the adb commands via the command line if phone isnt rooted correct? because i have t ried but thats a no go but as i said i assume thats because im not rooted.
You shouldn't have any reason to downgrade. You should just be able to use the LG tool to install the new ICS version when it "officially" comes out without any fuss.
If you want to install it right away (but slightly more difficult method), then follow the unbricking guide but use the new AT&T KDZ file instead of the one listed in the guide. And stop after it flashes that because you're done.
ok i assume the new att kdz is on this forum so i will look for it and give it a go i know the link hono had up yesterday for official attv20 was dead link.
oh another question when ya luanch the R&D test tool(UpTestEX_mod2_marwin.exe ) for select type do i leave it at cdma? and for phone mode leave it in diag? or should it be in emergency or cs_emergency that is not listed in the guide
ok got it to work i had to block the 127.0.0.1 lgmobile line in host and rebooted computer and pointed model dll on the R&D tool to the one in kd folder and then used the v20 official att ics and slet it stay on korean as country but chose english as language,thanks for hte help.
I know all of you people are so smart!!!! Someone please help me.I had to sell my iPhone to pay for a car window someone broke on me in San Francisco.And until I can get work to buy a new phone I'm stuck with LG Optimus G LS970 (the Made IN Korea). OK so all I can get the phone to do is two things(one)when I plug it in,all I see is the (secure booting error!),(Cause Boot Configuration Verify)and/or (two) Download Mode(DO NOT UNPLUG)the device until the process is complete.I need someone to literally walk me through the whole process please I'm not the sharpest tool in the shed but I have been progressively getting closer I think.also when I plug it in to the USB port on My Toshiba Satellite it says the Full Jelly Bean on Mako cannot be found do I need to buy jelly bean Platform 4.1.2 or can I get it online. I dont know where to go from here I'm stressing without a moble phone Please GOD!!! someone help me.! Please help me fix this thing I really need it Im so broke I cant pay attention
ThisCodeHell said:
I know all of you people are so smart!!!! Someone please help me.I had to sell my iPhone to pay for a car window someone broke on me in San Francisco.And until I can get work to buy a new phone I'm stuck with LG Optimus G LS970 (the Made IN Korea). OK so all I can get the phone to do is two things(one)when I plug it in,all I see is the (secure booting error!),(Cause Boot Configuration Verify)and/or (two) Download Mode(DO NOT UNPLUG)the device until the process is complete.I need someone to literally walk me through the whole process please I'm not the sharpest tool in the shed but I have been progressively getting closer I think.also when I plug it in to the USB port on My Toshiba Satellite it says the Full Jelly Bean on Mako cannot be found do I need to buy jelly bean Platform 4.1.2 or can I get it online. I dont know where to go from here I'm stressing without a moble phone Please GOD!!! someone help me.! Please help me fix this thing I really need it Im so broke I cant pay attention
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2230106
ThisCodeHell said:
I know all of you people are so smart!!!! Someone please help me.I had to sell my iPhone to pay for a car window someone broke on me in San Francisco.And until I can get work to buy a new phone I'm stuck with LG Optimus G LS970 (the Made IN Korea). OK so all I can get the phone to do is two things(one)when I plug it in,all I see is the (secure booting error!),(Cause Boot Configuration Verify)and/or (two) Download Mode(DO NOT UNPLUG)the device until the process is complete.I need someone to literally walk me through the whole process please I'm not the sharpest tool in the shed but I have been progressively getting closer I think.also when I plug it in to the USB port on My Toshiba Satellite it says the Full Jelly Bean on Mako cannot be found do I need to buy jelly bean Platform 4.1.2 or can I get it online. I dont know where to go from here I'm stressing without a moble phone Please GOD!!! someone help me.! Please help me fix this thing I really need it Im so broke I cant pay attention
Click to expand...
Click to collapse
You get this figured out?
What do you type in the command prompt to run teeny bin? I have a boot secure error on LG optimus g ls 970 I've been soft bricked for over a week. No one tells you what to enter on the command prompt to get teeny bin started!! Please help.
---------- Post added at 12:08 PM ---------- Previous post was at 12:02 PM ----------
Please help soft bricked LG optimus g on secure boot error. Need to know what to type in command prompt to get teeny bin started so I can get back in to recovery!! Nobody tells you which command to type in to get teeny bin to run.
kwaku israel said:
What do you type in the command prompt to run teeny bin? I have a boot secure error on LG optimus g ls 970 I've been soft bricked for over a week. No one tells you what to enter on the command prompt to get teeny bin started!! Please help.
---------- Post added at 12:08 PM ---------- Previous post was at 12:02 PM ----------
Please help soft bricked LG optimus g on secure boot error. Need to know what to type in command prompt to get teeny bin started so I can get back in to recovery!! Nobody tells you which command to type in to get teeny bin to run.
Click to expand...
Click to collapse
I don't remember having to use the command prompt, I think you might be doing something incorrect. Have you read over the entire thread mentioned above? It is the soft brick thread for our phone. I used it to recover my own before and had no problems.
I don't know what I'm doing wrong. The computer is Windows 8.1 and it's not working. I have the correct thread and the teenybin isn't responding. I'm lost. Maybe it's not compatible with the computer.
---------- Post added at 12:09 PM ---------- Previous post was at 12:05 PM ----------
I've put phone in download mode and done everything right to my knowledge.
kwaku israel said:
I don't know what I'm doing wrong. The computer is Windows 8.1 and it's not working. I have the correct thread and the teenybin isn't responding. I'm lost. Maybe it's not compatible with the computer.
---------- Post added at 12:09 PM ---------- Previous post was at 12:05 PM ----------
I've put phone in download mode and done everything right to my knowledge.
Click to expand...
Click to collapse
question Are you using a USB 3.0 port? Please tell me you are because that would be the problem.
kwaku Israel
Dopey I have tried everything I don't know what I'm doing wrong!! I know something is wrong or either my mom's laptop isn't working properly. It's weird man. I might just have to kick out $35 and have the root Dr.s fix it over the wire. I think it's something with the computer. I believe I've done everything correctly!!
I will check that out maybe I was. Is that why there are 2? One for 2.0 & one for 3.0? Hopefully that's the problem!! I'll check it out thoroughly tomorrow on the laptop and keep you posted!! Thanks a lot!!
kwaku israel said:
I will check that out maybe I was. Is that why there are 2? One for 2.0 & one for 3.0? Hopefully that's the problem!! I'll check it out thoroughly tomorrow on the laptop and keep you posted!! Thanks a lot!!
Click to expand...
Click to collapse
No that's not usually how it works, and I don't even know if new laptops are being produced with only 3.0 or not, you should be able to tell. It is easy to notice if the color is red or blue and sometimes orange inside the port on your laptop. If it is, then they are indeed 3.0 and that is your issue.
Yes one is red and I think the other is blue. I'll check it out tomorrow when I have access to the laptop. So I need a 2.0 port for it to work? Interesting. No wonder I was having the problems!! The threads don't explain that particular!! Thanks again for your help. I'm going see if I can use my daughter's laptop she has a Windows 7!! Maybe it has 2.0 ports!!
I can't access files from usb or micro sd. Can't connect to my lap top. How am I supposed to put a ROM on my LG? The TWRP is loaded, but I have no rom on the internal SD, so there is nothing to recover. TWRP is like a virus, it wiped out my phone. I can access the terminal mode on the phone, but how do I use that to load a rom? All I can find is Greek to me, stand on one leg, look west, hack a key, toss some salt over your shoulder, blah, blah, blah. There must be a simpler solution. This isn't a recovery project, its a destruction project. I used a custom recovery a few years back with no trouble on my Samsung I897. Please, if u understand how TWRP works, help me out.
Vic
As far as I know, Twrp for optimus g pro can't read the external SD card. Have you download the lg device drivers and install them on your laptop? Sounds like you haven't done so, otherwise your computer should be able to read your device. Once you establish the connection, you be able to transfer the file or flash the oem firmware. Everything you need is on this forum, search the topic on flashing the stock rom, there you will find the device drivers. Understand your frustration, but half of your posting is you *****in' and that doesn't help.
I have LG drivers on my laptop
[email protected] said:
I can't access files from usb or micro sd. Can't connect to my lap top. How am I supposed to put a ROM on my LG? The TWRP is loaded, but I have no rom on the internal SD, so there is nothing to recover. TWRP is like a virus, it wiped out my phone. I can access the terminal mode on the phone, but how do I use that to load a rom? All I can find is Greek to me, stand on one leg, look west, hack a key, toss some salt over your shoulder, blah, blah, blah. There must be a simpler solution. This isn't a recovery project, its a destruction project. I used a custom recovery a few years back with no trouble on my Samsung I897. Please, if u understand how TWRP works, help me out.
Vic
Click to expand...
Click to collapse
Before TWRP killed my phone, I was rooted and was able to connect my laptop to my phone no problem. I tried reloading LG drivers, but when I plug the phone in to USB, the Laptop tells me there is something wrong with the device, doesn't recognize it.
I have the LG drivers on my Laptop
Please tell me u have another idea:
[email protected] said:
Before TWRP killed my phone, I was rooted and was able to connect my laptop to my phone no problem. I tried reloading LG drivers, but when I plug the phone in to USB, the Laptop tells me there is something wrong with the device, doesn't recognize it.
Click to expand...
Click to collapse
hawkwind212 said:
As far as I know, Twrp for optimus g pro can't read the external SD card. Have you download the lg device drivers and install them on your laptop? Sounds like you haven't done so, otherwise your computer should be able to read your device. Once you establish the connection, you be able to transfer the file or flash the oem firmware. Everything you need is on this forum, search the topic on flashing the stock rom, there you will find the device drivers. Understand your frustration, but half of your posting is you *****in' and that doesn't help.
Click to expand...
Click to collapse
Have you try adb side load? If you have 2.3 or higher version of Twrp, you should have the side load function. Within adb you can push the file into which ever directory in your device. Other than the side load, you may have to flash the either cwm image file with lg flash tool or flash the stock rom and go from there.
ADB Sideload, yes I have it
hawkwind212 said:
Have you try adb side load? If you have 2.3 or higher version of Twrp, you should have the side load function. Within adb you can push the file into which ever directory in your device. Other than the side load, you may have to flash the either cwm image file with lg flash tool or flash the stock rom and go from there.
Click to expand...
Click to collapse
Although I have the ADB Sideload, I'm not sure how to use it. I can access it on the phone, but isn't the idea to use it from your laptop to move files over to the internal SD. How do I get an ADB on my laptop that will talk to the adb sideload of the phone? I tried using the ADB console of my super one click, but it could not see my phone. Sorry to be such a nub about this, but every problem is a new one to me.
Vic
Ok, I was able to connect via adb sideload
[email protected] said:
Before TWRP killed my phone, I was rooted and was able to connect my laptop to my phone no problem. I tried reloading LG drivers, but when I plug the phone in to USB, the Laptop tells me there is something wrong with the device, doesn't recognize it.
Click to expand...
Click to collapse
I was able to connect via adb sideload last night, but lost the connection mysteriously. I was able to connect after loading a "universal driver" to windowa 8. Perhaps my cable is intermittent, I'll check more into it tonight.
got a f240 version, can't get att us to work
[email protected] said:
I can't access files from usb or micro sd. Can't connect to my lap top. How am I supposed to put a ROM on my LG? The TWRP is loaded, but I have no rom on the internal SD, so there is nothing to recover. TWRP is like a virus, it wiped out my phone. I can access the terminal mode on the phone, but how do I use that to load a rom? All I can find is Greek to me, stand on one leg, look west, hack a key, toss some salt over your shoulder, blah, blah, blah. There must be a simpler solution. This isn't a recovery project, its a destruction project. I used a custom recovery a few years back with no trouble on my Samsung I897. Please, if u understand how TWRP works, help me out.
Vic
Click to expand...
Click to collapse
TWRP didnt kill your phone your lack of reading did, just use lgflashtools to flash stock TOT image and start over. Be sure to read all the forums before attempting anything, everything you need or could need is here all ready on xda and has been done all ready for situations like yours.
I get that, I really do but...
mrmcshagbag said:
TWRP didnt kill your phone your lack of reading did, just use lgflashtools to flash stock TOT image and start over. Be sure to read all the forums before attempting anything, everything you need or could need is here all ready on xda and has been done all ready for situations like yours.
Click to expand...
Click to collapse
I can use kdz files and flash tools no problem, but I can't get a rom for att in kdz. I can find a tot file that claims to be att usa that will work with LGNPST, but I can't get the DLL file (labled ...lgflash151...to register as a DLL on my laptop. I keep getting an entry point error. If the DLL won't register, lgnpst won't recognize it. I see some references to this, but I do not see where anyone has solved it. I would admit to not really understanding the difference between .tot and kdz, and why att us uses the tot and the rest of the world uses kdz. Kdz is so easy and tot is a pain. I seem to be chaising a ghost. At this point I can not even get a rom that comes up in English, and I can't read Korean. I have spent a month working on this every night, so help me if u will, tell me I can't read Korean, but please don't tell me I can't read English.
and by the way...
[email protected] said:
I can use kdz files and flash tools no problem, but I can't get a rom for att in kdz. I can find a tot file that claims to be att usa that will work with LGNPST, but I can't get the DLL file (labled ...lgflash151...to register as a DLL on my laptop. I keep getting an entry point error. If the DLL won't register, lgnpst won't recognize it. I see some references to this, but I do not see where anyone has solved it. I would admit to not really understanding the difference between .tot and kdz, and why att us uses the tot and the rest of the world uses kdz. Kdz is so easy and tot is a pain. I seem to be chaising a ghost. At this point I can not even get a rom that comes up in English, and I can't read Korean. I have spent a month working on this every night, so help me if u will, tell me I can't read Korean, but please don't tell me I can't read English.
Click to expand...
Click to collapse
and by the way, you can't use lgflashtools to load a tot, or at least not the lgflashtools I have, only a kdz. But thank you so much for responding to me.
[email protected] said:
I can use kdz files and flash tools no problem, but I can't get a rom for att in kdz. I can find a tot file that claims to be att usa that will work with LGNPST, but I can't get the DLL file (labled ...lgflash151...to register as a DLL on my laptop. I keep getting an entry point error. If the DLL won't register, lgnpst won't recognize it. I see some references to this, but I do not see where anyone has solved it. I would admit to not really understanding the difference between .tot and kdz, and why att us uses the tot and the rest of the world uses kdz. Kdz is so easy and tot is a pain. I seem to be chaising a ghost. At this point I can not even get a rom that comes up in English, and I can't read Korean. I have spent a month working on this every night, so help me if u will, tell me I can't read Korean, but please don't tell me I can't read English.
Click to expand...
Click to collapse
Okay download the kdz he states is telcel e980h and flash it. According to him it should work for our phone and be English by default.
http://forum.xda-developers.com/showthread.php?t=2420219
funny u should mention that
mrmcshagbag said:
Okay download the kdz he states is telcel e980h and flash it. According to him it should work for our phone and be English by default.
http://forum.xda-developers.com/showthread.php?t=2420219
Click to expand...
Click to collapse
I Started out with one of those and I did get it to work in English. I can no longer find that file. I no longer see anything on that site that will come up in English, and I don't see panama e980h. I searched google for that, and I get "file not found". Even when I had that, I couldn't get the phone to see the sim card or work on my att network. I had the filen my laptop at one point, I must have deleted it.
[email protected] said:
I Started out with one of those and I did get it to work in English. I can no longer find that file. I no longer see anything on that site that will come up in English, and I don't see panama e980h. I searched google for that, and I get "file not found". Even when I had that, I couldn't get the phone to see the sim card or work on my att network. I had the filen my laptop at one point, I must have deleted it.
Click to expand...
Click to collapse
You have to flash the base-band if you don't get signal KDZ''ing other phones KDZ, try the e980 Central America or the Mexico Telcel 980 one preferable the telcel since that's what he states will work. Also if a site isn't in English use Google translate or use Google Chrome browser it will translate web pages for you.
hawkwind212 said:
As far as I know, Twrp for optimus g pro can't read the external SD card. Have you download the lg device drivers and install them on your laptop? Sounds like you haven't done so, otherwise your computer should be able to read your device. Once you establish the connection, you be able to transfer the file or flash the oem firmware. Everything you need is on this forum, search the topic on flashing the stock rom, there you will find the device drivers. Understand your frustration, but half of your posting is you *****in' and that doesn't help.
Click to expand...
Click to collapse
Twrp 2.8.0.1 can read external sd
cant u enter download mode ?
Down load no problem
Proz00 said:
Twrp 2.8.0.1 can read external sd
cant u enter download mode ?
Click to expand...
Click to collapse
I now have bigger problems. I can only flash roms that are Korean in Language. Even though I pick English, when the flash is done I get Korean. I have tried numerous of the kdz roms, Mexican, arab etc. Some of them come up wanting a pin that I do not have. I feel like that guy fighting the whale.
By the way, thanks
[email protected] said:
I now have bigger problems. I can only flash roms that are Korean in Language. Even though I pick English, when the flash is done I get Korean. I have tried numerous of the kdz roms, Mexican, arab etc. Some of them come up wanting a pin that I do not have. I feel like that guy fighting the whale.
Click to expand...
Click to collapse
By the way, Its not about the phone, its my backup...its about the right way to do this, and its about me understanding it. I like LG and just want be comfortable doing these things with my LG Phone. I have flashed custom roms with my S3 back a few years ago, but this is a new batch of challenges. I really appreciate all the help!
Vic
OK, if I gt a stock phone...
If I buy another Used LG Stock ATT Optimus Pro, can I back up its ROM and restore it to my bricked optimus? How would I do that?
I could use TWRP for that?
Vic
Ok, Got my Optimus G Pro in English, with Lollipop
[email protected] said:
If I buy another Used LG Stock ATT Optimus Pro, can I back up its ROM and restore it to my bricked optimus? How would I do that?
I could use TWRP for that?
Vic
Click to expand...
Click to collapse
It would have been quicker if I could have read Korean. The Phone has a baseband, and recognizes my Sim, but is still not on AT&T. What is causing this...anyone???