[Q] Error loki-ifying the boot image when flashing ROM - LG Optimus G Pro

can't flash a CWM recovery on my wife's E980 using Freegee....Mine is the white one and I had no loki issues with it...everytime you flsays:
"checking if loki-ifying is needed/dev/block/platform/msm_sdcc. /by-name/boot needs lokifying. [-] Failed to find function to patch.
Error loki-ifying the boot image. "
yes I did use Freegee already and install CWM. When I booted it gave me this...I can't install any ROMS. yet my other G Pro (white) is fine and hasn't given me any issues. RIght now I'm stuck with it booting into clockwork by itself. And I would like to use TWRP but the version that comes with Freegee doesn't work right on the damn screen. If it's not bootlooping into Clockwork then it gets frozen at the LG screen with something about security crap. and the funny part is...I used Freegee both times.
EDIT: used LGFlashTool to bring it back..but she wants a custom ROM and every recovery I flash to it either
1. used this recovery. tried flashing using a CWM recovery that I used from Freegee http://forum.xda-developers.com/showthread.php?t=2552611
freezes at the LG screen with a SECURITY ERROR on the left corner of the screen (flashtools will fix)
2. When I do successfully flash a recovery using Freegee and I get it to boot into CWM it won't come back out of CWM it will boot automatically into it (LGflashtools will fix)
3. the freegee TWRP in won't work right with the touch screen.
Yes I saw that there are 2 topics similar to this, but they are G2's. Mine is an AT&T E980 that i'm having issues with.

I had exactly this same problem. I'm also on AT&T E980 and could not find a fix anywhere for this phone. I flashed back to stock so many times that I was ready to just get rid of it. What I finally noticed was that, if I flashed back to stock and took the update to E98010P, I could flash TWRP through FreeGee and the touch would work. I also used VooDoo OTA to preserve root through the update. I don't know if it was necessary, but it didn't cause me any problems and everything worked.
I have no idea why CWM stopped working and I could not use Phil's recovery either, but the whole experience has been maddening and I have never had so many problems with a phone before. Hope this helps.

i have the same annoying problem!
can someone help?
after the rom flash was done i've got the error so i immediately restored my backup

EdgarSnyder said:
I had exactly this same problem. I'm also on AT&T E980 and could not find a fix anywhere for this phone. I flashed back to stock so many times that I was ready to just get rid of it. What I finally noticed was that, if I flashed back to stock and took the update to E98010P, I could flash TWRP through FreeGee and the touch would work. I also used VooDoo OTA to preserve root through the update. I don't know if it was necessary, but it didn't cause me any problems and everything worked.
I have no idea why CWM stopped working and I could not use Phil's recovery either, but the whole experience has been maddening and I have never had so many problems with a phone before. Hope this helps.
Click to expand...
Click to collapse
so...Root using the old firmware...voodoo OTA then update?...and then restore root and then Freegee should work fine with TWRP?

ive installed the twrp recovery and the flash completed , but the idiot checked the MD5 than skipped it than finished and on the bottom line just did NOTHING!
what the hell!
what is going on with this phone! so frustrating ...

Yeah, I went back to stock, rooted and installed FreeGee and Voodoo, then took the update and flashed TWRP thru FreeGee.
Sent from my LG-E980 using xda app-developers app

and?
no you can install whatever rom you want?

amirnew said:
and?
no you can install whatever rom you want?
Click to expand...
Click to collapse
No, i'm pretty sure on the firmware i'm running (not sure what you're running) can only flash touchwiz based ROMS. No Cyanogenmod, AOSP or anything not based on samsung's stock UI

stanleyopar2000 said:
No, i'm pretty sure on the firmware i'm running (not sure what you're running) can only flash touchwiz based ROMS. No Cyanogenmod, AOSP or anything not based on samsung's stock UI
Click to expand...
Click to collapse
i've tryied flashing custom 4.1.2 rom... and my phone is e980 from att

amirnew said:
i've tryied flashing custom 4.1.2 rom... and my phone is e980 from att
Click to expand...
Click to collapse
wrong thread. it was meant for this one
http://forum.xda-developers.com/showthread.php?p=51529974

stanleyopar2000 said:
can't flash a CWM recovery on my wife's E980 using Freegee....Mine is the white one and I had no loki issues with it...everytime you flsays:
"checking if loki-ifying is needed/dev/block/platform/msm_sdcc. /by-name/boot needs lokifying. [-] Failed to find function to patch.
Error loki-ifying the boot image. "
yes I did use Freegee already and install CWM. When I booted it gave me this...I can't install any ROMS. yet my other G Pro (white) is fine and hasn't given me any issues. RIght now I'm stuck with it booting into clockwork by itself. And I would like to use TWRP but the version that comes with Freegee doesn't work right on the damn screen. If it's not bootlooping into Clockwork then it gets frozen at the LG screen with something about security crap. and the funny part is...I used Freegee both times.
EDIT: used LGFlashTool to bring it back..but she wants a custom ROM and every recovery I flash to it either
1. used this recovery. tried flashing using a CWM recovery that I used from Freegee http://forum.xda-developers.com/showthread.php?t=2552611
freezes at the LG screen with a SECURITY ERROR on the left corner of the screen (flashtools will fix)
2. When I do successfully flash a recovery using Freegee and I get it to boot into CWM it won't come back out of CWM it will boot automatically into it (LGflashtools will fix)
3. the freegee TWRP in won't work right with the touch screen.
Yes I saw that there are 2 topics similar to this, but they are G2's. Mine is an AT&T E980 that i'm having issues with.
Click to expand...
Click to collapse
Ok I have used CWM from FreeGee and used the Carbon (http://forum.xda-developers.com/showthread.php?t=2439911) ROM and it does not need lokifying for my AT&T E980. It loads fine. I'm looking for a way to fix the lokifying thing though as I can't flash too many ROMs, a lot need lokifying.

I've personally had no issues on my E980 using TWRP flashed by FreeGee, but you can always try the "hacked" TWRP provided by @madmack
http://forum.xda-developers.com/showpost.php?p=45497511&postcount=235

chp said:
I've personally had no issues on my E980 using TWRP flashed by FreeGee, but you can always try the "hacked" TWRP provided by @madmack
http://forum.xda-developers.com/showpost.php?p=45497511&postcount=235
Click to expand...
Click to collapse
+1
Always used Madmack's hacked TWRP for anything that requires loki and it works flawlessly.
Sent from my 4.4 Sphinx REMOD LG-E980

Related

[Q] help with recovery

I am sorry about the noobness but i cant seem to find a proper thread for recovery setup.
I installed ROM Manager and then the CWM recovery from there.
But if i try to root into recovery I get a " android with a exclamation mark" - so assumes i messed something up ?
only way is to power cycle the device .
Can anyone here please help how i install CWM as i want to flas CM 11
mshenoy4573 said:
I am sorry about the noobness but i cant seem to find a proper thread for recovery setup.
I installed ROM Manager and then the CWM recovery from there.
But if i try to root into recovery I get a " android with a exclamation mark" - so assumes i messed something up ?
only way is to power cycle the device .
Can anyone here please help how i install CWM as i want to flas CM 11
Click to expand...
Click to collapse
Have you tried going back to freegee and installing cmw there?
I used freegee.......it works...but couldn't get philz to work.. Its all good though 6.0.4.7 I think it is works fine for me so far
*2SHAYNEZ*KCCO*E980*
Yes guys. Thank you for the help.
Tried freegee and I got CWM to work finally pheww.
Now I have backup and just installed CM11 nightly
Thank you so much
Sent from my LG-E980 using xda app-developers app
shayneflashindaily said:
I used freegee.......it works...but couldn't get philz to work.. Its all good though 6.0.4.7 I think it is works fine for me so far
*2SHAYNEZ*KCCO*E980*
Click to expand...
Click to collapse
How were you able to make flashing custom roms work using freegee? I successfully rooted my Optimus G Pro and used freegee to install CWM recovery 6.0.4.7, but everytime I try to flash a custom rom - the phone would reboot after 10 -15 seconds. I followed and installed the custom roms accordingly to the instructions. Can you help me?
DraghanC said:
How were you able to make flashing custom roms work using freegee? I successfully rooted my Optimus G Pro and used freegee to install CWM recovery 6.0.4.7, but everytime I try to flash a custom rom - the phone would reboot after 10 -15 seconds. I followed and installed the custom roms accordingly to the instructions. Can you help me?
Click to expand...
Click to collapse
When you start the freegee app is there an option to "unlock" ?
also, are you able to use CWM otherwise? liks to make a nandroid backup and such ?
mshenoy4573 said:
When you start the freegee app is there an option to "unlock" ?
also, are you able to use CWM otherwise? liks to make a nandroid backup and such ?
Click to expand...
Click to collapse
There are two different versions of Freegee on the Playstore. One is the free version and One is the paid version. I used the free version and when I open the app to install CWM recovery I don't see the "unlock" option, so I think the "unlock" option is only available in the paid version. Also, when I used the free version of Freegee to install CWM recovery, I can make and restore my nandroid backup. Maybe I need to buy the paid version of Freegee??
no u don't need paid.
also I didn't have the unlock option and I was able to flash.
I would say try twrp.
also are u trying just 1 ROM or have to tried a couple. maybe do that
mshenoy4573 said:
no u don't need paid.
also I didn't have the unlock option and I was able to flash.
I would say try twrp.
also are u trying just 1 ROM or have to tried a couple. maybe do that
Click to expand...
Click to collapse
I already tried 3 different roms and they all turned out the same. Keep rebooting after 10 - 15 seconds. I might have to give twarp a try. thanks
Just wondering, what software version is your phone?
Sent from my LG-E980 using XDA Premium 4 mobile app
Check in CWM recovery, before you flash any of the ROM's that LOKI support is enabled, I think you can find it under Advanced and it says something like "Toggle LOKI support"
Erik
ricco333 said:
Check in CWM recovery, before you flash any of the ROM's that LOKI support is enabled, I think you can find it under Advanced and it says something like "Toggle LOKI support"
Erik
Click to expand...
Click to collapse
okay I will try that and see if it works.
ricco333 said:
Check in CWM recovery, before you flash any of the ROM's that LOKI support is enabled, I think you can find it under Advanced and it says something like "Toggle LOKI support"
Erik
Click to expand...
Click to collapse
do I enable Loki after the flash or before the flash? Because I enable loki in the advance option of CWM recovery after I flash a custom rom and the phone still reboots 10-15 seconds. I did all the normal wipes and stuff too. I'm thinking maybe its because of I'm the software version that I'm on which is E98010g.
He said "check before you flash any rom,that LOKI support is enabled"... You should carefully read instructions before you do anything or you will end with bricked device...
Sent from Tapatalk
mshenoy4573 said:
I am sorry about the noobness but i cant seem to find a proper thread for recovery setup.
I installed ROM Manager and then the CWM recovery from there.
But if i try to root into recovery I get a " android with a exclamation mark" - so assumes i messed something up ?
only way is to power cycle the device .
Can anyone here please help how i install CWM as i want to flas CM 11
Click to expand...
Click to collapse
i did this as well and somehow now i can only get into twrp however i cant flash anything...any direction on this? i cant find the file i need to put on the sd card and flash thru twrp...any help?
For some reason Rom manager cwm didn't work for me so I tried installing freegee from the play store and installing cwm from there.
Since freegee my cwm works fine and I was able to flash.
Have you given freegee a try ?
Sent from my LG-E980 using xda app-developers app
I'm having the same trouble with recovery. I was on SlimBean for several months and decided to flash a ROM from RadeonMaya, but it wouldn't boot, so I tried to restore my backup of Slim from CWM. It looked like it restored properly, but it wouldn't boot either. I finally reverted back to stock and rooted again, downloaded Freegee and tried to flash CWM. I booted into recovery to flash my Slim backup, but I got an "error loki-ifying the boot image". I tried Phil's recovery, but couldn't boot back into recovery from CWM
Since then, I have not been able to flash anything, and have reverted back to stock probably a dozen times. I've tried TWRP, but can't flash a version that works on 4.1.2. I'm beyond frustrated at this point. I had fun flashing on this phone until these problems showed up, now I'm just going to try to like the stock ROM and hope we get an update to KitKat.
Just a quick question guys. What does freegee's "unlock" feature do? I ask because I don't get that option in Freegee either. Is it supposed to network unlock your phone or? Also, what is the need for the unlock?

Is there a recovery for KitKat

I'm confused from reading posts and such. Is there a recovery for KitKat yet?
Dcm210 said:
I'm confused from reading posts and such. Is there a recovery for KitKat yet?
Click to expand...
Click to collapse
Did you find one?
shahrukhqasim said:
Did you find one?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=52277504&postcount=29
It comes with its own issues but gets you recovery. Afterwards, freegee works on the E-980 to flash a newer and more stable recovery.
jdk2 said:
http://forum.xda-developers.com/showpost.php?p=52277504&postcount=29
It comes with its own issues but gets you recovery. Afterwards, freegee works on the E-980 to flash a newer and more stable recovery.
Click to expand...
Click to collapse
"Secure booting error so boot success" is this something to be worried about?
And now if I flash some AOSP based ROM, will it work?
shahrukhqasim said:
"Secure booting error so boot success" is this something to be worried about?
And now if I flash some AOSP based ROM, will it work?
Click to expand...
Click to collapse
No, it's supposed to say that.
Not trying to highjack this thread, but I have 2 relevant questions.
1)
On my E980, I tried using Freegee to install recovery like back on Jelly bean. Every time I do this now, Freegee says an exception was thrown and that E98020g is not supported.
When I use this apk to install the kitkat recovery, everything works fine. Weird thing though is that afterwards, Freegee stops spitting these errors at me.
Any idea what's up with this? Should I stick with the Kitkat recovery, or now use Freegee to install its CWM/TWRP recovery?
2)
(continuing from question 1)
A few hours ago (and all day yesterday too), I did try flashing CWM through Freegee and it worked. I then used that recovery to flash the PhilZ Touch recovery, which I like more. With both the Freegee CWM and the PhilZ recovery, I can do pretty much everything just fine.
But... the problem is that at random times, the PhilZ recovery will cause me to get stuck in a Recovery bootloop. Basically, every bootup forces me into recovery whether I'm holding the proper buttons during bootup or not. (NOTE: I have yet to stick with the Freegee recovery versions long enough to see if they do this too, but some other people are reporting CWM bootloops).
So question 2 is this:
Is this being caused by PhilZ not being fully Kitkat compatible?
Will this Kitkat CWM Recovery not do this? Every time it happens, I must reflash my phone using the tot method and it's getting tiring... been trying to get things working for a day now.

[Q] Recovery for stock kitkat e980? (att)

How do i get recovery for this on the latest kitkat update? Ive been looking everhwhere, and obviously not hard enough because i cant find it. Heck there may not even be a way yet.
I tried to use that freegee app. Fail.
Tried to use that app with the egyptian icon and i got recovery. But its for a different model g pro because its not letting me flash crap.
All i want is cm11. Help please. Thanks.
I used the two methods you described. Freegee used the cwm 6.0.4.7 version. Then switched to philz 6.41.6 always say no to recovery and su fix on exit. But cwm 6.0.4.7 worked fine.
Sent from my LG-E980 using Tapatalk
I used this process but with the restore file from this post. Worked out very well for me.

Unable to install TWRP Recovery on LG G Pad v50020f

Hey guys,so heres the problem...recently i had to use the LG Support Tool and prior to this i was v50020d. When the tool had finished restoring the stock ROM,it upgraded me to v50020f. So i went and successfully rooted it with KingoRoot surprisingly enough with no trouble at all. I then tried to install TWRP Recovery,through the TWRP app,Flashify,Rashr and i even tried Fastboot and ADB which im led to believe don't work with the v500 but i still tried it and had absolutely no success at all in installing TWRP. I have tried flashing every version of TWRP from 2.8.7.1 back to 2.6.3.0 i think using all those apps mentioned above. So i came on here to XDA to see could i find any solution to my problem but no luck either but i did find a post where a script was used,edited and apparently worked. I downloaded the zip file that was used in this process,edited the runme.bat file by changing the last letter of the build to f which would correspond to my build which is v50020f. I saved the edited file and then ran the script which when finished told me that recovery had been installed so i rebooted the G Pad,it started up,the blue teamwin screen came up and then it just hung there for hours! Thats was it nothing more. No recovery installed. So then i went and used Flashify & flashed `twrp-2.8.7.1-v500.img´ and when i rebooted i got 'secure booting error,cause:device unlock:so boot success!!' rebooted the G Pad again and the same thing happened blue teamwun screen loads and then nothing,no recovery. So i flashed the same recovery image with TWRP Recovery app and when it was finished i got the message 'Success!! Flashing recovery was successful,would you like to attempt rebooting into recovery? so i did and again the same thing happened. Teamwin blue screen and nothing more. When i check TWRP Recovery app afterwards it tells me that there is no recovery installed or it us not recognised. Can anybody please,please,please find a solution to my problem? Oh yeah,i even tried booting into recovey by using the power and volume up and down trick too and got the same result. Thank you so much guys...hope you can help.
I think I've seen that in order to install TWRP on the V500 is similar to how on my VK810 variant, at least the part that requires downgrading your bootloader. If it's like the VK810, it has to be the bootloader from 4.2.2. I'm sure there's TWRP threads in these sections, specifically for the V500 that give the details and files.
I'd love to know a way too. I just rooted which went great, but I have the V50020f and don't want to do another thing until I see what happens in this thread. After years of flashing and rooting I finally hard bricked my Lenovo Yoga 10 and this is my replacement tablet, so I don't want to chance it at all. Until I read a concrete solution for this build I'm staying where I am.
That wall of text is really hard to read @[email protected]!c, when I first saw it I was too tired to try and decipher it so ignored it. Now I've had another look.
Have you tried downgrading to an older firmware which people have had success with?
I had trouble when I first got this tablet but kept reading the forum and found a method to downgrade, it isn't pretty but eventually it worked. As I'm new to this device I'm not overly familiar with the different official firmware versions so I'm not exactly sure what you've got.
My tablet was more complicated as the LG tool put the Chinese, no Google apps, version on for me as that is where it was bought. So I had to downgrade so I could get apps from the Play Store to flash my recovery!
So patience and research will reward you.
[email protected]!c said:
Hey guys,so heres the problem...recently i had to use the LG Support Tool and prior to this i was v50020d. When the tool had finished restoring the stock ROM,it upgraded me to v50020f. So i went and successfully rooted it with KingoRoot surprisingly enough with no trouble at all. I then tried to install TWRP Recovery,through the TWRP app,Flashify,Rashr and i even tried Fastboot and ADB which im led to believe don't work with the v500 but i still tried it and had absolutely no success at all in installing TWRP. I have tried flashing every version of TWRP from 2.8.7.1 back to 2.6.3.0 i think using all those apps mentioned above. So i came on here to XDA to see could i find any solution to my problem but no luck either but i did find a post where a script was used,edited and apparently worked. I downloaded the zip file that was used in this process,edited the runme.bat file by changing the last letter of the build to f which would correspond to my build which is v50020f. I saved the edited file and then ran the script which when finished told me that recovery had been installed so i rebooted the G Pad,it started up,the blue teamwin screen came up and then it just hung there for hours! Thats was it nothing more. No recovery installed. So then i went and used Flashify & flashed `twrp-2.8.7.1-v500.img´ and when i rebooted i got 'secure booting error,cause:device unlock:so boot success!!' rebooted the G Pad again and the same thing happened blue teamwun screen loads and then nothing,no recovery. So i flashed the same recovery image with TWRP Recovery app and when it was finished i got the message 'Success!! Flashing recovery was successful,would you like to attempt rebooting into recovery? so i did and again the same thing happened. Teamwin blue screen and nothing more. When i check TWRP Recovery app afterwards it tells me that there is no recovery installed or it us not recognised. Can anybody please,please,please find a solution to my problem? Oh yeah,i even tried booting into recovey by using the power and volume up and down trick too and got the same result. Thank you so much guys...hope you can help.
Click to expand...
Click to collapse
Hi!! I'm in the same boat! Any chance you were able to work out a solution? Thanks so much for any help!!
I know it didn't work for the OP, but coming from bone stock v50020f, I successfully rooted using ioroot25r1, updated Supersu through playstore, then using flashify i installed TWRP 2.8.7.1 (newest I think). Once booted into TWRP recovery, I wiped cache, data, and system, and then installed AOSP Marshmallow. All went smooth as silk, no problems at all. Now I can finally stop being jealous of my wifes Nexus 7!! Hope this helps some.
vettejock99 said:
Hi!! I'm in the same boat! Any chance you were able to work out a solution? Thanks so much for any help!!
Click to expand...
Click to collapse
Thanks.!
i have just used twrp manager apk from playstore (similar to flashify) to get TWRP 2.8.7.1 on stock v50020f, rooted using ioroot25r1 on a mac, with updated Supersu through playstore. just had to run the apk twice as it failed first time, and have booted into twrp recovery.
Had the same problem with the recovery but worked by rooting and flashing recovery with flashify.

[ROM] MOAR MM Rom v4.1 - Toasted Edition - 07/22/2016

Not my work but it works now.
How to
Reboot in recovery
Wipe device
Flash Rom and kernel:
Download for rom:
Flash this after:
Reboot
Recommend using twrp 3.0.0.1
what about the hardware keys? do they work with moar rom and this kernel or do we need virtual hardware keys?
FingerBlastJ said:
what about the hardware keys? do they work with moar rom and this kernel or do we need virtual hardware keys?
Click to expand...
Click to collapse
Kernel fixes hardware issues
and if I'm on note 5 moar rom with patch.... no issue flashing right?
Sky-high made us a kernel? Sweet sadistic smiles, success! So happy. Anyone know if it'll work like the LP patch did for note roms, or does more need to happen first? Or do people just need to start trying and report back?
-edit-
Clicked the link and saw it was a note 5 Rom. What can I say, I was excited!
Blzfrost said:
Sky-high made us a kernel? Sweet sadistic smiles, success! So happy. Anyone know if it'll work like the LP patch did for note roms, or does more need to happen first? Or do people just need to start trying and report back?
-edit-
Clicked the link and saw it was a note 5 Rom. What can I say, I was excited!
Click to expand...
Click to collapse
Just flash Rom and kernel everything will work.
MonkeyAround said:
Just flash Rom and kernel everything will work.
Click to expand...
Click to collapse
Oh I'm setting everything up right now for the flash! I'm so excited. Once I realized you linked to a note 5 Rom most of my questions got answered. My favorite part, the kernel was posted on my bday.
i tried wiping and clearing cache then flashing the rom and the kernel. nothing actually happens to my phone. i end up on the same home screen and apps i had installed on moar 5.1.1 with note 5 patch.
any ideas why wiping my phone doesnt work on twrp 3.0.0.0?
FingerBlastJ said:
i tried wiping and clearing cache then flashing the rom and the kernel. nothing actually happens to my phone. i end up on the same home screen and apps i had installed on moar 5.1.1 with note 5 patch.
any ideas why wiping my phone doesnt work on twrp 3.0.0.0?
Click to expand...
Click to collapse
Update your TWRP.
https://dl.twrp.me/zenltespr/
yea I tried doing that with Odin and it would freeze mid way. I also tried flashing a twrp update zip file on twrp and that didn't work either.
you think I should flash with flash fire?
bricked my phone by trying to flash newer version of twrp with twrp manager
been trying to flash unbrick tar and pit file to get back up and running but its not working.
any help is much appreciated
fixed the brick by flashing new recovery in Odin, now on 3.0.2. still can't get the phone to wipe out install new rom and kernel
FingerBlastJ said:
fixed the brick by flashing new recovery in Odin, now on 3.0.2. still can't get the phone to wipe out install new rom and kernel
Click to expand...
Click to collapse
Have you checked for root with root checker? I have lost root access a few times in the past?
yea I just checked with root checker and I have root access.
I've never had this happen to me... weird
anything else you can think of?
FingerBlastJ said:
yea I just checked with root checker and I have root access.
I've never had this happen to me... weird
anything else you can think of?
Click to expand...
Click to collapse
Last thing I can think of is when opening TWRP the first time. It asks if you want to make the system 'read only'. Did you select No?
I never got that message when I flashed twrp 3.0.2 to unblock... how do I make it show up?
FingerBlastJ said:
I never got that message when I flashed twrp 3.0.2 to unblock... how do I make it show up?
Click to expand...
Click to collapse
Not sure. You can click mount and see what is mounted. I am not sure that will work. I am not sure exactly what you are trying to wipe, but mount the items you are attempting to wipe and make sure the read-only is unchecked.
Try this:
Check to see if oem is checked
Re-root via root tar/odin
twrp 3.0.0.1 from edge files post in general
Backup stock
Wipe
Flash Moar
Don't reboot
Flash skyhigh kernel
Flash xposed(don't have to)
Reboot
Allow it to boot loop a couple time (from sky kernel)
Give 5-10 minutes to boot
I just did it with no issues and I've personally had more luck with 3.0.0.1 than any of the others.
heres my issue...twrp doesnt do anything for me (all versions) whether i wipe or install
so i used flashfire to flash the rom and the kernel at once and it finally displayed aroma installer (wouldnt get that in twrp)
however, after it in stalled i got stuck on boot screen
the only fix for this was flashing unbrick aok3 tar file which brought me to stock
i put on twrp as a recovery again starting fresh unrooted and it still doesnt respond to any of my commands
i think i will try flash fire on stock one more time and see what happens since its the only thing that is responding
FingerBlastJ said:
heres my issue...twrp doesnt do anything for me (all versions) whether i wipe or install
so i used flashfire to flash the rom and the kernel at once and it finally displayed aroma installer (wouldnt get that in twrp)
however, after it in stalled i got stuck on boot screen
the only fix for this was flashing unbrick aok3 tar file which brought me to stock
i put on twrp as a recovery again starting fresh unrooted and it still doesnt respond to any of my commands
i think i will try flash fire on stock one more time and see what happens since its the only thing that is responding
Click to expand...
Click to collapse
Your on Lp bootloader that's your issue.
Download Marshmallow tar from the general post I made for rooting Bpg1.
Flash tar and follow post.
twrp. 3.0.x.x is more for marshmallow. You need to be on 6.0.1 not 5.1.1.
Don't use fireflash on this device.
Fireflash is more for phones with locked bootloaders like Verizon s4 on the of1 update.
Fireflash isn't really up to date with our phone and could easily brick your device.

Categories

Resources