My XPERIA SL Won't START . HEEELP!! - Sony Xperia S, Acro S, Ion

Hello.
I Have a sony xperia sl. Today i tried to update my android to 4.4.2 kitkat. I rooted my mobile and then i tried install a ROM from this forum from recovery mode. For about an hour it was starting (appears just the sony logo), so i restarted it (power button + volume down). Now it don't want start. No signals of life...I tried to charge the battery but nothing...Please heeelp me :-s, what can i do now?
Sorry for my bad english.

shut down your cellphone,and go to fast mod,insyall the bootimg from the rom,and then goto recovery,install the rom,and reboot.I think it is OK
Sent from my Xperia S using XDA Premium 4 mobile app

michael1125 said:
Hello.
I Have a sony xperia sl. Today i tried to update my android to 4.4.2 kitkat. I rooted my mobile and then i tried install a ROM from this forum from recovery mode. For about an hour it was starting (appears just the sony logo), so i restarted it (power button + volume down). Now it don't want start. No signals of life...I tried to charge the battery but nothing...Please heeelp me :-s, what can i do now?
Sorry for my bad english.
Click to expand...
Click to collapse
try using sony update service. it is the safest way to recover.

michael1125 said:
Hello.
I Have a sony xperia sl. Today i tried to update my android to 4.4.2 kitkat. I rooted my mobile and then i tried install a ROM from this forum from recovery mode. For about an hour it was starting (appears just the sony logo), so i restarted it (power button + volume down). Now it don't want start. No signals of life...I tried to charge the battery but nothing...Please heeelp me :-s, what can i do now?
Sorry for my bad english.
Click to expand...
Click to collapse
did you unlock your bootloader? Unlocked bootloader allows you to flash the custom kernel for your phone and it is vital for booting up custom rom like cyanogenmod, paranoid android, slimbean, etc. Every rom need a correct kernel for it successfully boot up, for example, if you are using stock rom(original rom from sony), you will need stock based kernel for it .Ok, now get back to the topic, you said that your phone had boot failed after installing a custom rom and only sony logo shows up. That means your kernel is stock kernel and not match with your rom so thats why your phone wont boot up. You will need to flash the boot.img included in your rom.zip before flashing the rom. Now try this tutorial to recover your phone http://forum.xda-developers.com/showthread.php?t=1849170

Related

[Q] Problem With CM9 FXP124

Hello..
I´m am trying to get CM9 to work on my xperia arc s (LT18i)
But when i flash boot.img with fastboot, my phone keeps restarting.
I got the free xperia logo, ore what there is written, and then it reboots.
I know i should press volume down button, but nothing happens, it just reboots.
I have rooted, unlocked bootloader, and even installed CWM before i flash the boot.img
The boot.img comes with the download, so i dont think its the problem there?
My phone was clean, no custom rom.
And i press a lot of times on volume down button
Can you help me?
There is some problem with kernel provided with FXP124.
Try the kernel from post #2359 of this thread instead:
http://forum.xda-developers.com/showthread.php?t=1356685&page=236
Wow..
THX

[Q] Bricked Xperia r800i , what should I try now?

Hi Xda users,
I was having old cm9 flashed about 4 months ago on my phone (r800i), and today I wanted to install new CM release and new kernel. I simply flash new CM9 kernel using flashtool fastboot mode like always, flashtool flashing was complete successfully, and after that I cant turn on my phone. No led , no fastboot mode, no flashmode, just 1 vibrate after pressing power button.
What can I do next ? any steps to do next please (
grzysztof said:
Hi Xda users,
I was having old cm9 flashed about 4 months ago on my phone (r800i), and today I wanted to install new CM release and new kernel. I simply flash new CM9 kernel using flashtool fastboot mode like always, flashtool flashing was complete successfully, and after that I cant turn on my phone. No led , no fastboot mode, no flashmode, just 1 vibrate after pressing power button.
What can I do next ? any steps to do next please (
Click to expand...
Click to collapse
OK NVM after battery remove I was able to enter flash mode ana reflash phone

Sony Xperia Ion (LT28h) Not Booting At All

I have sony xperia ion LT28h...
it has unlock bootloader.
it is rooted
i first flashed 6.1.E.3.7
then MIUI 3.7
then i flashed kernal 204 to remove recovery
the it stuck in bootloop Sony Logo The Again Sony Logo
someone advised me to Hold Vol+ Vol- And Power key and wait for 3 Vibration
i done and Device was shutted down but now its not Starting/Booting
even Not Charging...
Someone Please HELP!!!
aishwary said:
I have sony xperia ion LT28h...
it has unlock bootloader.
it is rooted
i first flashed 6.1.E.3.7
then MIUI 3.7
then i flashed kernal 204 to remove recovery
the it stuck in bootloop Sony Logo The Again Sony Logo
someone advised me to Hold Vol+ Vol- And Power key and wait for 3 Vibration
i done and Device was shutted down but now its not Starting/Booting
even Not Charging...
Someone Please HELP!!!
Click to expand...
Click to collapse
jusy keep ur device charging... may take sometimes to finally began charging... or you could dissamble ur ion...
sent from my aoba device :3
aishwary said:
I have sony xperia ion LT28h...
it has unlock bootloader.
it is rooted
i first flashed 6.1.E.3.7
then MIUI 3.7
then i flashed kernal 204 to remove recovery
the it stuck in bootloop Sony Logo The Again Sony Logo
someone advised me to Hold Vol+ Vol- And Power key and wait for 3 Vibration
i done and Device was shutted down but now its not Starting/Booting
even Not Charging...
Someone Please HELP!!!
Click to expand...
Click to collapse
dude MIUI is based on CM10.
Flashing stock recovery will always lead to bootloop.
Charge it for few hours and then flash miui kernel via fastboot.
MrGezz said:
jusy keep ur device charging... may take sometimes to finally began charging... or you could dissamble ur ion...
sent from my aoba device :3
Click to expand...
Click to collapse
I done charging for ful night when i woke up it was charging normally.
its LED turned green and again same it started automatically and caught in bootloop.
i again pressed Vol+ Vol- And Power key for 3 Viberation.
and kept it for charging.
Now As Soon as it start showing orange led ill flash..
Thanks a Lot...
utsav911 said:
dude MIUI is based on CM10.
Flashing stock recovery will always lead to bootloop.
Charge it for few hours and then flash miui kernel via fastboot.
Click to expand...
Click to collapse
Thanks For the info i didn't knew it.
aishwary said:
Thanks For the info i didn't knew it.
Click to expand...
Click to collapse
there are mainly two types.
1. stock based - these roms use stock kernel. ( stock, roms for unlocked BL etc)
2. AOSP based - these roms have their own kernel or use CM kernel. (e.g. all CM, AOKP, AOSP, ParanoidAndroid, PAC, MIUI (if based on CM) etc).
hope this helps you
Guyz. I cant wait.
so i took out The Screwdriver and unplugged the battery and now its working fine..
Thanks For All Your Help Guyz..
Salute To XDA-Developers...:good::good::good::laugh::laugh:

[Q] Phone in not starting after installing custom rom

I have installed CyanogenMod 11 custom rom to my Xperia Arc S. After flashing boot.img through flashtool, device got shutdown. Till now everything was fine. But after this the tutorial said to start the phone and after the phone vibrates, start pressing the volume down button. I did the same. But after vibration, phone is not showing anything. It shows dim light on screen but its not showing either the logo nor its starting. The LED light on side turns to purple but nothing happens after that. I did this with every button but its not starting. Pls halp me out....
Thanks...
vishalsitapura said:
I have installed CyanogenMod 11 custom rom to my Xperia Arc S. After flashing boot.img through flashtool, device got shutdown. Till now everything was fine. But after this the tutorial said to start the phone and after the phone vibrates, start pressing the volume down button. I did the same. But after vibration, phone is not showing anything. It shows dim light on screen but its not showing either the logo nor its starting. The LED light on side turns to purple but nothing happens after that. I did this with every button but its not starting. Pls halp me out....
Thanks...
Click to expand...
Click to collapse
Did you flash the kernel for your device?
Sent from my Xperia Neo V using Tapatalk 2
vishalsitapura said:
After flashing boot.img through flashtool, device got shutdown.
Click to expand...
Click to collapse
Tell more about this. How did you do it, what happened, what buttons did you press etc etc.
Yes. I have installed kernel for it via flashtool. Initially after doing this it was not going to recovery mode and also it was not getting connected to flashtool. But now it is getting connected to flashtool in fastboot mode. So tried to flashing with 10.2 version, it showing finished but again the same problem. Its not going to recovery mod.
as in, HOW did you flash the kernel exactly. Dont just say you used flashtool, how did you use it? What combination did you use to get into fastboot? Any errors in flashtool? How did you boot into recovery (I.e. which keys did you press) and does the LX kernel logo even appear on boot?
Sent from my Nexus 5 using Tapatalk
vishalsitapura said:
Yes. I have installed kernel for it via flashtool. Initially after doing this it was not going to recovery mode and also it was not getting connected to flashtool. But now it is getting connected to flashtool in fastboot mode. So tried to flashing with 10.2 version, it showing finished but again the same problem. Its not going to recovery mod.
Click to expand...
Click to collapse
First check does that kernel has built in recovery...If nothing works,to get your phobe to work flash stock .ftf file with flashtool.
Do you have unlocked bootloader?
And try one more thing,when you turn on the phone start pressing volume down (-).)!
Sent from my Xperia Arc LT15i using XDA
I think i have the same problem as OP.
I decided to try out LegacyXperia CM11 and installed it yesterday. It went well, but it is still kinda buggy so i decided to go back to besttt's Slim Bean. I copied rom files on SD card and went to flash kernel (darkanzuEOL). I flashed it through Flashtool like every other time and it went without errors so i proceeded to boot into recovery so i can flash the rom. This is where everything stopped working normally. After i power on the phone and press voldown to enter cwm it just gets stuck on cwm loading screen. If i dont try to get into recovery it just bootloops. I tried several kernels i have on my HDD and always the same result.
I'm downloading stock img to flash and see if that will help. will let you know what happens.
EDIT:
Stock img worked, now i'm back on slim. Only other thing i changed ( which i think is the cause) is i used original sony usb cabel instead of my Nexus 7's i used originaly

[Solved]Unable to get in Flashmod(Green LED) when using Sony FlashTool

My Sony Xperia Z5 Premium now is running 3rd part ROM. Unfortunately it looks like some problem because battery is dropping so fast without gaming or video watching. So I decided to use Sony FlashTool recovery stock system. And there is the problem: I already flash the TWRP recovery, I can get into Fastboot mode(BlueLED), but once FlashTool ask for "Press Volume Down button(I know its Hold the button), and plug in cable" it should into FlashMod(GreenLED), but my phone just into TWRP recovery and FlashTool still waiting for Flashmod.
I think solution is using a stock recovery system rather than TWRP. But I just cannot get stock recovery in every where.
Help me plz
And I am sure about I already installed drivers requested.
--------------------
OK, I just solved my problem. That gad damn Volume Down button just broken XD

Categories

Resources