Develop Bugs

[JB] Kernel 3.4.XX

Hi guys!
This is the kernel 3.4.XX for our device.
I've compiled it from erik96,merged with arco's and hadidjapri's,sources.
It's on alpha stage/not completely optimized for android,yet. It's yet Linux like.
Kernel version: 3.4.33
Initial Release
New x32 ABI support, this shall somehow maximize CPU perfomance
Swap-in readahead skips over holes
Netfilter enhancement
Crypto - sha224 and sha384 routines
Some minor file system changes
Networking enhancements (networking speed is a bit better)
Advanced Configuration and Power Interface S4 sleep state - this would result in ability of guest VMs to hibernate on Xen
Larger physical address extension on the ARM architecture
Some battery improvements, battery life seems to be better
Lots of open source graphic DRM changes
Intel Sandy Bridge performance improvements (only on PC's)
Btrfs improvements
Improved Power Management
New Power Management Phases
Governors taken from PhenomKernel
I/O Schedulers from PhenomKernel
Compiled with Linaro 4.7.3 Toolchain.
Working:
Camera (both picture and video, 720P recording)
USB
3G & Calls
Audio
Battery
Touchscreen
Touch keypad
Bluetooth
Accelerometer
Proximity Sensor
Orientation Sensor
Digital Compass
Vibration
GPS
Display
BLX
Vsync
Not Working:
Wifi
USB OTG
Download:
1st release - DOWNLOAD - 26/02/2013 - 3.4.33 - LKA
Credits:
Erik96 - Base 3.4 kernel
Arco68 - Base 3.0 kernel
Hadidjapri - Support
Hotteabilly - Support

Reserved

As far as I know OTG isn'supported yet in Ancora because arco didn't change a things from his rom. This is for clearing the confusion later. Thanks
-sent from my awesome phone-

hi miki, can you show me the logcat showing the vsync is working? because it's not working on my phone

hotheabilly said:
As far as I know OTG isn'supported yet in Ancora because arco didn't change a things from his rom. This is for clearing the confusion later. Thanks
-sent from my awesome phone-
Click to expand...
Click to collapse
I've already deleted that line.
hadidjapri said:
hi miki, can you show me the logcat showing the vsync is working? because it's not working on my phone
Click to expand...
Click to collapse
It doesn't work also for me, I'm editing the first post

miki2o said:
I've already deleted that line.
It doesn't work also for me, I'm editing the first post
Click to expand...
Click to collapse
Already runs out of my thanks today, will thanks you later
-sent from my awesome phone-

hotheabilly said:
Already runs out of my thanks today, will thanks you later
-sent from my awesome phone-
Click to expand...
Click to collapse
It is the caf kernel 3.4 ???????

biagio7xD said:
It is the caf kernel 3.4 ???????
Click to expand...
Click to collapse
it's erik's
anyway, wifi should be working. (it works on my build)

Hmm, WiFi is primary source for me... Anyways, THANKS for this brilliant job! Arco! :thumbup:
From my Wonder, trying to PORT Sense to this device!
1/10 Done.

TiTAN-O-One said:
Hmm, WiFi is primary source for me... Anyways, THANKS for this brilliant job! Arco! :thumbup:
From my Wonder, trying to PORT Sense to this device!
1/10 Done.
Click to expand...
Click to collapse
Arco? Maybe Erik96

370mb ram?
i already tried it on newest slimbean but only got 346mb
now i revert back to 3.0.x.x
waiting till wifi working

hi miki please run this command from terminal or adb
Code:
logcat -v time -d|grep 'VSYNC'
and look at the output. run this command quickly after reboot

hadidjapri said:
hi miki please run this command from terminal or adb
Code:
logcat -v time -d|grep 'VSYNC'
and look at the output. run this command quickly after reboot
Click to expand...
Click to collapse
Now my phone is under charging and i cannot take it for a bit...I'll this later

Change again to 3.4.33 anzac because I just cant resist >.<
-sent from my awesome phone-

hotheabilly said:
Change again to 3.4.33 anzac because I just cant resist >.<
-sent from my awesome phone-
Click to expand...
Click to collapse
LOL, but what do you mean with anzac? xD

Android without working WiFi is like...
A computer without any input device
Click to expand...
Click to collapse
Try throwing up hadi's branch to activate WiFi :victory:

foid said:
370mb ram?
i already tried it on newest slimbean but only got 346mb
now i revert back to 3.0.x.x
waiting till wifi working
Click to expand...
Click to collapse
Me too, on PA 2.99, only got 346mb
Btw, nice work..
Sent from my GT-I8150 using Tapatalk 2

Thank you
I tried it
There is problem with the screen which (galaxy wonder gt-i8150) appears on (pink color font). And didnt appear correctly
Sent from my GT-I8150 using xda premium

biagio7xD said:
It is the caf kernel 3.4 ???????
Click to expand...
Click to collapse
No, for now is LKA.
Madridii said:
Thank you
I tried it
There is problem with the screen which (galaxy wonder gt-i8150) appears on (pink color font). And didnt appear correctly
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
Already know that.
hadidjapri said:
hi miki please run this command from terminal or adb
Code:
logcat -v time -d|grep 'VSYNC'
and look at the output. run this command quickly after reboot
Click to expand...
Click to collapse
This is it! So is enabled or not?

Hey guys! I'm gald to see that my project is ported to Galaxy W. :good: Great job devs .
But what's wrong about WiFi?
@OP, did you pushed the dhd.ko module compiled during the compilation process into the RAMDISK at /lib/modules? If not, this is the problem... it can be fixed in 3 minutes .
Also, I'll update to CAF maybe next week or so, so you guys can try use those sources too :highfive:
I hope the WiFi problem will get fixed.
Regards,
Erik

[Q] swipe to wake

Recently i've been reading a lot abt. s2w on DHD. I just wanna know how it works. I believe by s2w it means swipe your fingure from home button to search button to wake the device up. I've flashed the HD-Kernel T7 (sense kernel) but it doesnt seem to work or maybe i'm not doing it right. I edited the script as well & "tap to wake" stared working but its not what I needed. Any help would be nice :fingers-crossed:

Try pachaas kernel...
Sent from my DHD using Niks project X Rebirth...

rohithksaj said:
Try pachaas kernel...
Sent from my DHD using Niks project X Rebirth...
Click to expand...
Click to collapse
I flashed that too but it didnt work as well. I mean is it like you just flash the Kernel & s2w starts working? Cuz if thts the case.. then it isnt working for me . What am I doing wrong here.. ??

me.noob said:
I flashed that too but it didnt work as well. I mean is it like you just flash the Kernel & s2w starts working? Cuz if thts the case.. then it isnt working for me . What am I doing wrong here.. ??
Click to expand...
Click to collapse
Oh...u forgot to download kernel tuner from market my friend...
Download kernel tuner , go to misc option and at the bottom check s2w option..
Then its done...
Sent from my DHD using Niks project X Rebirth...

Just be aware that activating S2W will result in a couple of things:
1. You will use more battery
2. If you restart your phone you usually need to reactivate S2W
I just use Sweep2Wake enabler/disabler from Google Play and it needs to reenable S2W after every restart not sure about kernel tuner.

Which touchcreen manufacturer do you have? Synaptics is known to have an issue with Sweep2Wake, you'll have to check which manufacturer you have (instructions are in the T7 thread I believe)

[CLOSED] Beta Android 4.3 US & CAN | Deodex & Odex | Now Rooted

READ THIS ENTIRE POST PLEASE​
PLEASE PROCEED TO USE THE 4.3 VERSION LOCATED Android 4.3 JWR66V
UPDATED ROM IS MUCH MORE STABLE AND BATTERY LIFE IS GREAT.
Thanks to everyone for testing/using this one until now
This ROM comes from I9505 variant.
Luckily the only thing you will need to do is apply Loki patch if you require it for other ROMS.
If you are a CAN variant you can simply install the ROM with no other issues or steps.
IMPORTANT
User reports suggest that battery life is much better as well as working google wallet in the odex version, root should work for both.
Google Play 4.1.10 : Please manually update Google Play to prevent gps/maps battery drain, download apk and install as usual
There are two FactoryKeystring.apk's included and actively used by Android System, one is hidden and one is in System/app, removing one seems to improve battery life (must have root)
Do NOT change Dpi you will loose root and you will loose wifi. You have been warned.
WARNING
As always, i'm not responsible for your phone blowing up or bricking. Hell this is completely pre-release software that Google hasn't even published yet so you better be sure you're ready to take the plunge and accept that anything can happen and i assume no responsibility. this is all your choice.
System Details
Android version: 4.3
Build ID: JWR66N
PDA: I9505GUEUBMFP
CSC: I9505GXARBMFP
Build Date: 26 June 2013
Changelist: 968842
DOWNLOADS
Odexed & DevHost Mirror
Deodexed & DevHost Mirror
--
LokiDoki Only for U/S variants - CAN variants do not download.
Chainfires Root Guide When doing this please flash full rom and let boot then reboot back to recovery and install this zip
HOW TO FOR CAN VARIANTS
1. Copy ROM (Odex or Deodex) to your internal SD Card
2. Enter Recovery (Power + Volume Up + Home)
3. Do a Wipe/Factory Reset (Necessary due to new Android version)
4. Flash ROM
5. Reboot your device!
HOW TO FOR US VARIANTS
1. Copy ROM (Odex or Deodex) to your internal SD Card
2. Enter Recovery (Power + Volume Up + Home)
3. Do a Wipe/Factory Reset (Necessary due to new Android version)
4. Flash ROM
5. Flash LokiDoki don't rely on a recovery with auto loki
5. Reboot your device!
SCREENSHOTS
SAMmobile page linked here has screen shots. Its stock AOSP not TW
BENCHMARKS
Antutu // Quadrant \\ 3DS Max
Moved to bottom in attachments to reduce OP size
APPS THAT HAVE ISSUES
1. Apex will FC - Solution, use Nova Launcher or various other ones.
2. DashClock will not work at all.
3. CNN App, Live TV - lets you sign in but when attempting to play a video it gives "this video is not available" error.
4. Tapatalk has been reported to have issues, works fine for me. Test yourself.
5. Titanium Backup seems to be having issues restoring.
EXTRAS || PROBLEMS || BUGS
1. Root Chainfires Root Guide
2. IR Works, Install WatchON if you want
3. Charging is SLOW at first, please give ROM about a day to settle and it will be fine.
4. Battery may also drain faster then normal at first, again please give ROM time to settle.
5. Stock Camera - If you start the camera for the first time, you may get a black screen. close it and wait a minute. Reopen and it will work.
6. Wallet works on Odex, have had mixed reports with Deodex
7. Continue to post feed back about apps having issues so I can update here
WHATS DIFFERENT IN 4.3 FROM 4.2.2?
- Roboto font has been cleaned up see here
- "android.hardware.bluetooth_le" listed as a feature in the Android System Info app, suggesting Bluetooth Low Energy support is on-board in Android 4.3. This feature isn't listed on the Google edition GS4 review unit running Android 4.2.2
- Bluetooth tethering is present in the 4.3 ROM, while it's absent (bizarrely) in the 4.2.2-based GS4 GE unit.
- A new checkbox under Advanced Wifi settings allows Google's location service to scan for Wifi networks even when Wifi is turned off and not being used for wireless networking (likely part of Google's new approach to battery-friendly location services)
- Multiple options under "Monitoring > Profile GPU Rendering," as seen in this Google I/O video.
This lets you view a graphical representation of the time taken to generate a frame, and see whether you're hitting the 60 frames per second target or not. This should help devs create more buttery apps.
- New debug options for the new non-rectangular clipping feature. This is a new graphical capability for devs in Android API level 18.
- New option to "Use experimental WebView" (this likely changes the browsing engine used to handle websites within apps, but has yet to be confirmed.
- There is now a button that lets you "Revoke USB debugging authorization." This deletes the RSA key generated for USB debugging authorization from the phone itself, previously you had to do this from the computer side.
- Pressing menu in the phone app, lets you now add two-second pauses in your dialing string (denoted by a comma) or longer waits (denoted by a semicolon.)
- In the Settings of the phone app, you can now enable dial-pad autocomplete and change DTMF (dual-tone, multi-frequency) tone lengths.
- Of course there's the new camera app.
- Long, multi-word SSID names now wrap properly down to a second line in the quick-settings pulldown.
- When you take a screenshot and share it via email, the Subject field is automatically populated with the date and time of the shot.
Thanks to :
SAMmobile for posting Jelly Bean 4.3
A$$h4t for providing the LokiDoki link
mr_blanket fo providing a link to updated Google Play apk to fix some battery drain.
AndroidPolice : their article showing the Roboto font changes/clean up - Found here
AndroidCentral : For their hands on article describing some changes - found here
Chainfire for getting Root!

But you cant root this?

SysAdmNj said:
But you cant root this?
Click to expand...
Click to collapse
Not sure, haven't tried.
Make a NANDROID then download and install and try to root like you would anything, if it doesn't work then reboot in to recovery and restore your NANDROID.

Downloading now......

kylecore said:
Not sure, haven't tried.
Make a NANDROID then download and install and try to root like you would anything, if it doesn't work then reboot in to recovery and restore your NANDROID.
Click to expand...
Click to collapse
I already had the leak but havent tried it yet as I tried GE yesterday and it didnt go too well. Went back to Omega7, will try this as soon as I hear you can root.

Do we need the AOSP kernel or the Touchwiz kernel for the AT&T I-337?

oldblue910 said:
Do we need the AOSP kernel or the Touchwiz kernel for the AT&T I-337?
Click to expand...
Click to collapse
I was wrong.
Sent from my GT-I9505G using xda premium

oldblue910 said:
Do we need the AOSP kernel or the Touchwiz kernel for the AT&T I-337?
Click to expand...
Click to collapse
Please see the op where it says in the second sentence NOT to use a TW kernel, since this is stock AOSP you need an AOSP kernel.
clyon3 said:
TW..... Some say it won't boot and you will lose root.
Click to expand...
Click to collapse
Wrong, completely wrong. It will just need to be a pre-loki'd kernel (i've posted a link to one in the OP)
kylecore said:
Please find the correct kernel for your phone that is NOT a TW kernel in the various threads before attempting to flash.
Click to expand...
Click to collapse

kylecore said:
Please see the op where it says in the second sentence NOT to use a TW kernel, since this is stock AOSP you need an AOSP kernel.
Wrong, completely wrong. It will just need to be a pre-loki'd kernel (i've posted a link to one in the OP)
Click to expand...
Click to collapse
So an aosp att kernel would work?
Sent from my SGH-I337 using Tapatalk 2

Gonna attempt to port this to ATT S4
Sent from my SGH-I337 using Tapatalk 2

mrakifa said:
So an aosp att kernel would work?
Click to expand...
Click to collapse
Yes in fact try the one in the OP it links to a thread where the AOSP one is.
Anthony04x said:
Gonna attempt to port this to ATT S4
Click to expand...
Click to collapse
Theres nothing to port, just flash an ATT kernel of choice immediately after the rom and its fine.

kylecore said:
Yes in fact try the one in the OP it links to a thread where the AOSP one is.
Theres nothing to port, just flash an ATT kernel of choice immediately after the rom and its fine.
Click to expand...
Click to collapse
All you need is loki doki the stock kernel works wifi, camera, bluetooth and lte no need to flash any other kernels
Sent from my GT-I9505G using Tapatalk 2

mastergrillo said:
All you need is loki doki the stock kernel works wifi, camera, bluetooth and lte no need to flash any other kernels
Sent from my GT-I9505G using Tapatalk 2
Click to expand...
Click to collapse
I can also verify this. LokiDoki makes the stock kernel work just fine.

Right then, downloaded ROM and AOSP kernel provided in OP. Wiped, flashed, wifi is a no go for me and same as camera, totally borked (black screen). LTE works...everything else seems to work.

mastergrillo said:
All you need is loki doki the stock kernel works wifi, camera, bluetooth and lte no need to flash any other kernels
Click to expand...
Click to collapse
oldblue910 said:
I can also verify this. LokiDoki makes the stock kernel work just fine.
Click to expand...
Click to collapse
Thanks, anyone have a link to the thread for that? I can update the OP for people.
I'm a CAN variant so i've never touched anything that even mentions Loki
TheSmokingAndroid said:
Right then, downloaded ROM and AOSP kernel provided in OP. Wiped, flashed, wifi is a no go for me and same as camera, totally borked (black screen). LTE works...everything else seems to work.
Click to expand...
Click to collapse
If you're on ATT see the above and use stock kernel

Those that installed it can you confirm that root works?
Sent from my SGH-I337 using xda premium

sabre31 said:
Those that installed it can you confirm that root works?
Sent from my SGH-I337 using xda premium
Click to expand...
Click to collapse
No root for this yet
Sent from my GT-I9505G using Tapatalk 2

sabre31 said:
Those that installed it can you confirm that root works?
Sent from my SGH-I337 using xda premium
Click to expand...
Click to collapse
I don't believe anyone has figured out root yet.
+1 on loki doki for ATT I337
Download loki-doki zip here: http://tau.shadowchild.nl/attn1/?p=483

A$$h4t said:
I don't believe anyone has figured out root yet.
+1 on loki doki for ATT I337
Download here: http://tau.shadowchild.nl/attn1/?p=483
Click to expand...
Click to collapse
does flashing it from the OUDHS Recovery work too? (it auto-lokis kernels)
and another question
for the google edition 4.2 I had to flash the Ktoon TW Kernel. Why AOSP for this one?
thanks!

jhong91 said:
does flashing it from the OUDHS Recovery work too? (it auto-lokis kernels)
and another question
for the google edition 4.2 I had to flash the Ktoon TW Kernel. Why AOSP for this one?
thanks!
Click to expand...
Click to collapse
Thats the recovery im using and it didnt do for me i had to use loki doki
Sent from my GT-I9505G using Tapatalk 2

January 28: New Version Slim ION Honami Cyanogen Way UB/LB

New version added, only 197 mb in zip. See download section...
_________________________________________________________________________________________________
Here is my tribute to Cyanogenmode team and their great success in creating lightning speed roms.
This rom is based on my Aoba Pure Black, but instead of the original size of 390 mb, this version has only 240 197 mb in zip. This is as close to CM roms (190 mb) as possible. I believe this is the first stock based rom of this size. In addition to removing usual Google/Social/Sony bloat, I took great care to get rid of literally hundreds of unnecessary files in framework and lib directories. As a result, the rom is (in my view, of course) as fast, fluid and ram available, as CM roms, but with the added benefit of good battery life. Your Android OS won't take more than 4-6% of battery life. At the same time, the rom has all the usual and latest Xperia Z1 features: honami framework/icons/animation.
The idea was to improve on something that is hard rock stable, as opposed to doing Kitkat, which is ages away from stability on the part of Google and the development community without negating the latter's great work.
DESCRIPTION:
1. Fully deodexed, rooted, busyboxed, debloated (3rd party GAPPS still work), black themed version.
2. Based on JB 4.1.2/.96 version ported by me
3. Honami Framework with fully black UI including Phone, Contacts, Calendar, Clock, Calculator, Home (7 icons), Quick Settings, Volume Panel et al
4. CPU Control, Led Control, SMS Counter and OEM Dock in Settings
5. Apollo player and CM file manager
6. AOSP lock screen with new vertical animation
7. Nexus Camera with all resolutions (no stock camera)
8. Only 240 197 mb in size (zipped)
9. On first start about 375-385 mb of ram available
10. Regular boot is under 30 seconds
11. Blue themed dynamic boot animation
12. Ready to go APN settings for many countries
CREDITS: Niabok and JJwrongJJ for Honami Framework, Hitfan for 7 icon Home, Avik6123 for latest Z1 apps, CM team for Apollo, CM File manager and APN settings. PM me if I forgot you.
INSTALL INSTRUCTION
1. Have 211 JB stock kernel, Roger Baseband (if your have LT28i or AT&T versions) and CWM
2. Enter recovery, go to Mounts and Storage, mount System/Cache/Data and format each. Remember, factory reset is not enough!
3. Install the rom, reboot and let it settle
4. Go to Settings/Display/Quick Settings and choose Quick Settings for black, as opposed to SystemUI for white
5. Enable Wifi/Data, then go to Settings/Wifi/Advanced and tick stay on when screen is off, if you use VOIP services
6. Install CWM and you are all set
7. Enjoy the rom and hit Thank you/Donate or both
P.S. Rom and GAPPS are in Download Section
XDA:DevDB Information
Slim ION Honami Cyanogen Way, a ROM for the AT&T Sony Xperia ion
Contributors
optimumpro
ROM OS Version: 4.1.x Jelly Bean
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Stock JB 211 Kernel
Based On: Stock
Version Information
Status: Stable
Stable Release Date: 2014-01-17
Created 2014-01-17
Last Updated 2014-01-28

Wish I still had my Ion to test this rom(had to sell it, it's still running your rom though), great work and thanks for not abandoning Ion users.

Where is the rom? Download section? Thanks. I was about to go back to your aoba ultimate privacy rom
Edit- Found it... downloading now. Will report back

at the top of this page, just above the first post there is a line with black background which is currently on "DIscussion" . Next to it is "Download"... thats where you will find link to the rom and the gapps... i am downloading as we speak.
Najuto9tail said:
Where is the rom? Download section? Thanks. I was about to go back to your aoba ultimate privacy rom
Click to expand...
Click to collapse

Soo... Is it possible to have twrp recovery from mrgezz's cm rom on your rom? I'm guessing the answer is no but, thought I'd ask.
Sent from my Xperia ion using xda app-developers app

No problems to report. Spent a few minutes testing everything and loving it so far. Thanks so much for this awesome rom.
the T-9 functionality is missing in the dialer. Is it possible to enable it or do you recommend another app?

Perfect rommm

imm1304 said:
No problems to report. Spent a few minutes testing everything and loving it so far. Thanks so much for this awesome rom.
the T-9 functionality is missing in the dialer. Is it possible to enable it or do you recommend another app?
Click to expand...
Click to collapse
Try the attached...
Unzip (don't flash), manually move to system/apps with right permissions and reboot.

I will give it a try. I have feeling that this rom will be amazing.
Sent from my LT28h using Tapatalk 2

Some screenshots? :laugh:

Thanks for this... works perfectly. :good:
optimumpro said:
Try the attached...
Unzip (don't flash), manually move to system/apps with right permissions and reboot.
Click to expand...
Click to collapse

This rom is fast and smooth..
Good job.
Can someone help me.. Why my lockscreen is not fullscreen?
Sent from my LT28i using XDA Premium 4 mobile app

Thanks man your rom is bleezing fast. No more lagging. Amazing home screen. Everything till now is perfect. Iwill give it a good charge to see who battery will stand. One more thing stamina mode and
Could you. Please. Activate. Small apps its not. Working..
Sent from my LT28i using Tapatalk 2

Another thing. The led light in charging mode while screen is turned off Going strange like Sos sign.
Any solution for it.
Sent from my LT28i using Tapatalk 2

anoevo said:
Thanks man your rom is bleezing fast. No more lagging. Amazing home screen. Everything till now is perfect. Iwill give it a good charge to see who battery will stand. One more thing stamina mode and
Could you. Please. Activate. Small apps its not. Working..
Sent from my LT28i using Tapatalk 2
Click to expand...
Click to collapse
Stamina causes more problems than benefits. That's why I removed it.

anoevo said:
Another thing. The led light in charging mode while screen is turned off Going strange like Sos sign.
Any solution for it.
Sent from my LT28i using Tapatalk 2
Click to expand...
Click to collapse
That's because "Led Control" enabled in Settings. You can disable it

Small apps please @-}-- @optimumpro
Sent from my LT28i using Tapatalk 2

anoevo said:
Another thing. The led light in charging mode while screen is turned off Going strange like Sos sign.
Any solution for it.
Sent from my LT28i using Tapatalk 2
Click to expand...
Click to collapse
You don't have to turn off led control. Just go there and configure it the way you want...

anoevo said:
Small apps please @-}-- @optimumpro
Sent from my LT28i using Tapatalk 2
Click to expand...
Click to collapse
Small Apps: try the attached. Unzip (don't flash) and manually transfer to system/apps with correct permissions. There is no guarantee they will work, as I might have removed support for them. If they don't work, just delete them...

credo92 said:
Some screenshots? :laugh:
Click to expand...
Click to collapse
I am running CM10 right now. Perhaps someone else could post a few pictures?

enable dt2w in cm11

I have a problem enabling the "double tap to wake" feature in cyanogenmod 11 snapshot m5, the code provided on the forums thread (post 2 i think) throws an error and i also can't find the file s2w_allow_double_tap in /sys/android_touch/ whereas other files e.g. those needed for swipe2wake are there. I also can't create a file there, the filemanager says it can't find the file/folder (??)
Does someone have a solution/ any ideas?

Simpo151 said:
I have a problem enabling the "double tap to wake" feature in cyanogenmod 11 snapshot m5, the code provided on the forums thread (post 2 i think) throws an error and i also can't find the file s2w_allow_double_tap in /sys/android_touch/ whereas other files e.g. those needed for swipe2wake are there. I also can't create a file there, the filemanager says it can't find the file/folder (??)
Does someone have a solution/ any ideas?
Click to expand...
Click to collapse
There no doubletap2wake feature in stock cm kernel. Use custom kernel if u want that. And no..u can't create that file just like that.
Sent from my One X using Tapatalk

audahadi said:
There no doubletap2wake feature in stock cm kernel. Use custom kernel if u want that. And no..u can't create that file just like that.
Sent from my One X using Tapatalk
Click to expand...
Click to collapse
Okay i thought it would be as they are providing the code in the official post... But anyways, du you have any kernel suggestions that will give me decent performance, good battery life (i'm barely getting to 2hrs screen time right now) and dt2w?
Sent from my One X using xda app-developers app

Simpo151 said:
Okay i thought it would be as they are providing the code in the official post... But anyways, du you have any kernel suggestions that will give me decent performance, good battery life (i'm barely getting to 2hrs screen time right now) and dt2w?
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
Try all available...[emoji12] choose which suit best. Most custom kernel have dt2w. For cm rom...only lyapota,next,faux @ xmister compatible. Ask in kernel thread if encounter any issue.
Sent from my One X using Tapatalk