Hey,
My One's microusb port will only charge my phone.
I'm not sure what happened but it started acting weird and the battery is draining faster than usual.
I've tried a couple different cables and computers and nothing is working.
My problem is my bootloader is unlocked and I can't relock it to take to verizon to get a replacement.
Will verizon care? Any suggestions?
csmcdem said:
Hey,
My One's microusb port will only charge my phone.
I'm not sure what happened but it started acting weird and the battery is draining faster than usual.
I've tried a couple different cables and computers and nothing is working.
My problem is my bootloader is unlocked and I can't relock it to take to verizon to get a replacement.
Will verizon care? Any suggestions?
Click to expand...
Click to collapse
It doesn't recognize it in fastboot ?
Chilidog said:
It doesn't recognize it in fastboot ?
Click to expand...
Click to collapse
nope
Is it a usb 3 port? Needs to be a 2 if it is.
Sent from my Lunar Ecliptic One.
brymaster5000 said:
Is it a usb 3 port? Needs to be a 2 if it is.
Sent from my Lunar Ecliptic One.
Click to expand...
Click to collapse
Nope. It's worked before
Have you went into developer settings and made sure usb debugging is checked?
---------- Post added at 03:29 PM ---------- Previous post was at 03:28 PM ----------
There's also always adb wireless apps, where you don't need a cable
sk842018 said:
Have you went into developer settings and made sure usb debugging is checked?
---------- Post added at 03:29 PM ---------- Previous post was at 03:28 PM ----------
There's also always adb wireless apps, where you don't need a cable
Click to expand...
Click to collapse
yep, usb debugging is checked
my main problem is not being able to get into fastboot, so that I can relock and s-on it. or, at the very least, flash an hboot without the developer warning.
Download adb wireless and "adb reboot fastboot"
sk842018 said:
Download adb wireless and "adb reboot fastboot"
Click to expand...
Click to collapse
that'll get me into fastboot, but my computer still won't recognize it in fastboot
Have you tried a different cable?
sk842018 said:
Have you tried a different cable?
Click to expand...
Click to collapse
yes, multiple ones
Related
Hey guys, just a few days ago I messed up my screen and can't even see anything on it. However, the phone itself works, especially since the USB detects it. However, I cannot access the files because of the "locked screen" issue. I am on a Mac running Lion with no access to a PC at this point.
I was wondering if there was anyway to get into the phone's file system without the stupid locked screen issue, since of course I can't do anything on it because it's broken haha.
It was rooted, had clockwork, and ran mmuzzy's jellybean rom.
You can get adb access while booted into a custom recovery. Is your screen totally screwed or can you see when you boot into fastoot / recovery.
3rdstring said:
You can get adb access while booted into a custom recovery. Is your screen totally screwed or can you see when you boot into fastoot / recovery.
Click to expand...
Click to collapse
I can't see anything on it, nor does the touch actually work.
USB debugging on? Do you have adb setup?
3rdstring said:
USB debugging on? Do you have adb setup?
Click to expand...
Click to collapse
USB debugging is in. I have never actually done with ADB so I'm not really sure how to work it. Any insight on that?
http://forum.xda-developers.com/showthread.php?t=1869380
Sent from my Galaxy Nexus using Tapatalk 2
---------- Post added at 11:14 PM ---------- Previous post was at 11:12 PM ----------
http://forum.xda-developers.com/showpost.php?p=25804454&postcount=59
Sent from my Galaxy Nexus using Tapatalk 2
So my phone won't connect to the computer, I have tried everything Kies on Mac, Kies Air, and Kies on PC and none of it is working.I'm running LiquidSmooth rom if that makes a difference. Please help.
I had the same problem on CM10. I fixed it by doing the following, i had to pull the battery and wait 30 seconds. Then reboot into recovery, then reboot into the ROM. Then by plugging it in, the USB storage icon should appear
Let me know how it goes.
Sent from my SAMSUNG-SGH-T989 using xda premium
You could also try uninstalling and reinstalling the Samsung driver for your PC.
SolMinor said:
So my phone won't connect to the computer, I have tried everything Kies on Mac, Kies Air, and Kies on PC and none of it is working.I'm running LiquidSmooth rom if that makes a difference. Please help.
Click to expand...
Click to collapse
UmarZahid said:
I had the same problem on CM10. I fixed it by doing the following, i had to pull the battery and wait 30 seconds. Then reboot into recovery, then reboot into the ROM. Then by plugging it in, the USB storage icon should appear
Let me know how it goes.
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
i had the same problem.. i searched for a bit and came across your reply, and doing the battery pull worked, for whatever reason..excellent..
---------- Post added at 01:18 AM ---------- Previous post was at 01:12 AM ----------
20twins10 said:
i had the same problem.. i searched for a bit and came across your reply, and doing the battery pull worked, for whatever reason..excellent..
Click to expand...
Click to collapse
so if i stop the usb storage it becomes unavailable and im guessing another battery pull would be nexessary..
---------- Post added at 01:57 AM ---------- Previous post was at 01:18 AM ----------
20twins10 said:
i had the same problem.. i searched for a bit and came across your reply, and doing the battery pull worked, for whatever reason..excellent..
---------- Post added at 01:18 AM ---------- Previous post was at 01:12 AM ----------
so if i stop the usb storage it becomes unavailable and im guessing another battery pull would be nexessary..
Click to expand...
Click to collapse
so i did a pull, got into recovery, booted back to the system, plugged in and usb did in fact work.. however.. once i disconnected and tried to reconnect, it would not.. even more battery pulls wouldnt let it reconnect..
Try reinstalling/flashing the ROM again, along with GAPPS and the wipe (if you're in CM10 by installing the wipe, then CM10, then GAPPS) or if you're in something else, try reflashing if the USB connection bothers you
Sent from my SAMSUNG-SGH-T989 using xda premium
Settings<storage<menu<USB computer connection < enable mass storage.
UmarZahid said:
I had the same problem on CM10. I fixed it by doing the following, i had to pull the battery and wait 30 seconds. Then reboot into recovery, then reboot into the ROM. Then by plugging it in, the USB storage icon should appear
Let me know how it goes.
Click to expand...
Click to collapse
Thank you so much for this Umar, it was so simple that I have never thinked about this solution.
After trying on several different computers, with different cables, cleaned my phone mUSB mother connector with alcohol and put in some compressed air, changed 4 different ROMs, your solution solved my issue and now it works like a charm.
Thanks again!
:good: :victory:
LE: I didn't boot into Recovery, just Powered OFF my phone, pulled out the battery, waited about a minute and turned ON the phone.
How do I unlock my Xperia S? I've tried many ways, none to which have worked.
Could someone offer some assistance?
fuQt said:
How do I unlock my Xperia S? I've tried many ways, none to which have worked.
Could someone offer some assistance?
Click to expand...
Click to collapse
Go here : http://unlockbootloader.sonymobile.com/
I've tried but it didn't work.
fuQt said:
I've tried but it didn't work.
Click to expand...
Click to collapse
Try again. Here you go : http://www.xda-developers.com/andro...or-unlockingrelocking-the-bootloader-rooting/
fuQt said:
I've tried but it didn't work.
Click to expand...
Click to collapse
Yeah...try again. It worked for most of the people. And if you are still not able to do, kindly mention the step where you are getting stuck. People will be able to help better if they understand the problem...
Best of luck...!!!
Is ur phone even unlockable? If yes,then put the code that Sony send u in a software called Sony Relocking Bootloader,it will definitely unlock it
Sent from my LT26i using xda premium
---------- Post added at 03:09 AM ---------- Previous post was at 03:08 AM ----------
I'll post the link later
Sent from my LT26i using xda premium
@rka said:
Yeah...try again. It worked for most of the people. And if you are still not able to do, kindly mention the step where you are getting stuck. People will be able to help better if they understand the problem...
Best of luck...!!!
Click to expand...
Click to collapse
It just gets stuck on here
Waited long and it didn't do anything.
fuQt said:
It just gets stuck on here
Waited long and it didn't do anything.
Click to expand...
Click to collapse
Looks like your device is not connected to the PC in fastboot.
Are you properly connected with the blue LED on?? If you have flashtool, open that. It shows if your device is connected in fastboot or not.
fuQt said:
It just gets stuck on here
Waited long and it didn't do anything.
Click to expand...
Click to collapse
Besides, make sure you have installed correct drivers.
If you have flashtool, go to C:/Flashtool/drivers and run the .exe file in it.
@rka said:
Looks like your device is not connected to the PC in fastboot.
Are you properly connected with the blue LED on?? If you have flashtool, open that. It shows if your device is connected in fastboot or not.
Click to expand...
Click to collapse
My LED is green when connected to the PC.
I power off the device, wait 30 seconds. Then hold the volume button as I connect the USB
It should be blue in fastboot mode
Sent from my LT26i using xda premium
So Bootloader unlocked but still don't have signal. Does bootloader sim unlock the phone?
fuQt said:
My LED is green when connected to the PC.
I power off the device, wait 30 seconds. Then hold the volume button as I connect the USB
Click to expand...
Click to collapse
Yes...you are not connected in fastboot. Like @cities516 said, apparently, you don't have the proper driver installed.Install the driver as suggested.
I was having issues with fastboot(it used to go in fastboot and then get disconnected and entered normal charging mode) as I am using windows 8(64Bit)...If you are having for that, this thread helped me...update your android_winusb.inf file accordingly and install it.
If things go right, device should get connected in fastboot and blue LED should remain on.
---------- Post added at 06:28 PM ---------- Previous post was at 06:23 PM ----------
ohh...you unlocked BL...cool
@rka said:
Yes...you are not connected in fastboot. Like @cities516 said, apparently, you don't have the proper driver installed.Install the driver as suggested.
I was having issues with fastboot(it used to go in fastboot and then get disconnected and entered normal charging mode) as I am using windows 8(64Bit)...If you are having for that, this thread helped me...update your android_winusb.inf file accordingly and install it.
If things go right, device should get connected in fastboot and blue LED should remain on.
---------- Post added at 06:28 PM ---------- Previous post was at 06:23 PM ----------
ohh...you unlocked BL...cool
Click to expand...
Click to collapse
See my post above.
"So Bootloader unlocked but still don't have signal. Does bootloader sim unlock the phone?"
fuQt said:
See my post above.
"So Bootloader unlocked but still don't have signal. Does bootloader sim unlock the phone?"
Click to expand...
Click to collapse
Do you mean your network signal is down since you unlocked your bootloader?? That should not have hapened.
can you dial *#*#7378423#*#* and check in service info > configuration and check the bootloader unlock status??
This Problem is solved and worked successfully
wouldn't fix or unbrick my phone without the help of these guys , all my respect goes to ::
@willcracker
@os_man
@setul34
@l33tlinuxh4x0r
@sd_shadow
if this thread was useful to you please donate to them with a cup of coffee
Hi XDA
i didn't want to make it a long thread but i have to , bare with me here :
first i followed that topic on XDA : http://forum.xda-developers.com/lg-g3/general/guide-update-to-lollipop-root-bumpd-twrp-t3048845
i tried to install twrp with imageprep but after rebooting it says secure booting error or something like that
i also tried this after that but with the same error https://www.youtube.com/watch?v=2we1YDc5JGU
but always the mobile was rebooting and opened like nothing happened
so i searched the internet for a solution i tried this one : https://www.youtube.com/watch?v=4YZ0i6aFsfM
but i guess the file attached weren't compatible so it ends up with an error before doing anything so there was no option except this : http://forum.xda-developers.com/lg-g3/help/help-secure-boot-error-trying-to-boot-t3054977
and here comes the misery , cuz i just got my phone and after the step while you write the commands in the android terminal emulator
and BOOM everything went black
NO BOOT , NO RECOVERY , NO DOWNLOAD MODE , absolutely NOTHING :crying: i freaked out a lot , but after searching for 3 days i've found this xda thread : http://forum.xda-developers.com/lg-g3/general/unbrick-lg-g3-qhsusbbulk-qualcomm-9008-t3072091
sadly i'm now on LGE AndroidNet USB port (com 11)
and what i'm getting from this thread that i've to short circuit two pins in my LG G3 Motherboard so i can switch LGE AndriodNet USB Port to Qualcomm 9008
Before anything else i want to make sure that i'm on the right track so just want to approve these steps :
1- open the phone
2- to make the device read as "Qualcomm 9008" not as "LGE AndriodNet USB Modem" i have to :
a- short cut the pins in the photo you provided "without the battery" for 3 minutes
b- connect the phone with the USB cable in the computer "without the battery"
c- my PC will detect the device as "Qualcomm"
3- after that i'm good to use your LG G3 unbrick method
are these steps right ?
just need to know when to plug in my battery and when i connect the phone with the cable , the pins must be connected or i can just connect the pins for 3 minutes and then remove the connection between them ?
Please anyone answers me with the exact steps or give me a short video on how to do it alone because i'm still rookie at these stuff
thanks xda members :fingers-crossed:
Am i posting in the wrong section or what ?
Evilix said:
Am i posting in the wrong section or what ?
Click to expand...
Click to collapse
If you have asked for help in the threads you have linked, without receiving a response, you can try quoting someone that may know or use @ before their user name like @sd_shadow
This is a very technical and likely very few people have even attempted it, so it may be awhile before the right people log in to XDA and see your post.
This thread will be moved to G3 Q&A, Help & Troubleshooting
I too am having issues with my LG G3 trying this method but the thread linked has been closed.
Hi, i just solved this problem like just an hour before. And yes all your steps are right but make sure you select same port in the tool too,
And do not remove the connection between pins until your device recognize as Qualcomm
---------- Post added at 09:13 PM ---------- Previous post was at 09:11 PM ----------
You can use my thread for more help. os_man help me a lot with this problem
http://forum.xda-developers.com/lg-g3/help/enter-download-mod-boot-recovery-t3127547
setul34 said:
Hi, i just solved this problem like just an hour before. And yes all your steps are right but make sure you select same port in the tool too,
And do not remove the connection between pins until your device recognize as Qualcomm
---------- Post added at 09:13 PM ---------- Previous post was at 09:11 PM ----------
You can use my thread for more help. os_man help me a lot with this problem
http://forum.xda-developers.com/lg-g3/help/enter-download-mod-boot-recovery-t3127547
Click to expand...
Click to collapse
How long did it take for your computer to recognize the phone? I'm having trouble shorting the pins... Very small points that you have to hit. Also does the screen turn on or stay off when you do it correctly?
l33tlinuxh4x0r said:
How long did it take for your computer to recognize the phone? I'm having trouble shorting the pins... Very small points that you have to hit. Also does the screen turn on or stay off when you do it correctly?
Click to expand...
Click to collapse
it took me like 1-2 minute after i connect it to proper point. and get recognizing it in pc. and phone will still off.
setul34 said:
it took me like 1-2 minute after i connect it to proper point. and get recognizing it in pc. and phone will still off.
Click to expand...
Click to collapse
Ok thanks for the heads up... I was thinking that it was supposed to be about 3 seconds but 2 minutes I will try again.
l33tlinuxh4x0r said:
Ok thanks for the heads up... I was thinking that it was supposed to be about 3 seconds but 2 minutes I will try again.
Click to expand...
Click to collapse
try this one http://forum.xda-developers.com/attachment.php?attachmentid=3334601&d=1432746694
i tried others to but nothing happened ... and then i got recognize when i connect this two points
and also make sure you have correct drivers installed.
l33tlinuxh4x0r said:
How long did it take for your computer to recognize the phone? I'm having trouble shorting the pins... Very small points that you have to hit. Also does the screen turn on or stay off when you do it correctly?
Click to expand...
Click to collapse
THANKS ALL for replying and i will try again 2 mins this time
setul34 said:
try this one http://forum.xda-developers.com/attachment.php?attachmentid=3334601&d=1432746694
i tried others to but nothing happened ... and then i got recognize when i connect this two points
and also make sure you have correct drivers installed.
Click to expand...
Click to collapse
thanks that was an instant com port when I plugged in the USB cable.
Now when I try to flash it says "device not found in dload trying flash programmer." when using boarddiag and error 64 in lgflashtool
l33tlinuxh4x0r said:
thanks that was an instant com port when I plugged in the USB cable.
Now when I try to flash it says "device not found in dload trying flash programmer." when using boarddiag and error 64 in lgflashtool
Click to expand...
Click to collapse
so are you done with BoardDiag tool? and can you go in download mode ?
setul34 said:
so are you done with BoardDiag tool? and can you go in download mode ?
Click to expand...
Click to collapse
No I get an error with BoardDiag tool mentioned above.
"device not found in dload trying flash programmer."
l33tlinuxh4x0r said:
No I get an error with BoardDiag tool mentioned above.
"device not found in dload trying flash programmer."
Click to expand...
Click to collapse
have you checked your port# in device manager ? and in BoardDiag tool ? are those same ?
---------- Post added at 10:41 PM ---------- Previous post was at 10:37 PM ----------
l33tlinuxh4x0r said:
No I get an error with BoardDiag tool mentioned above.
"device not found in dload trying flash programmer."
Click to expand...
Click to collapse
Maybe @os_man can help you with this error. i'm exactly not sure about this error.
is someone stuck at unknown USB device (something something) ??
I got past the error... Now I flashed the partitions. How do I get into download mode? Do I unplug the device? Do I need to plug in the battery for download mode?
l33tlinuxh4x0r said:
I got past the error... Now I flashed the partitions. How do I get into download mode? Do I unplug the device? Do I need to plug in the battery for download mode?
Click to expand...
Click to collapse
okay now u can put your battery in. and push powerbutton + volume up button at the same time
and at the LG LOGO u can release power button but continue pressing volume up button.
---------- Post added at 11:01 PM ---------- Previous post was at 10:58 PM ----------
Evilix said:
is someone stuck at unknown USB device (something something) ??
Click to expand...
Click to collapse
thats because you need to connect two point. and also make sure u have installed qualcomm drivers.
setul34 said:
okay now u can put your battery in. and push powerbutton + volume up button at the same time
and at the LG LOGO u can release power button but continue pressing volume up button.
---------- Post added at 11:01 PM ---------- Previous post was at 10:58 PM ----------
thats because you need to connect two point. and also make sure u have installed qualcomm drivers.
Click to expand...
Click to collapse
please give me the right working link for the qualcomm drivers , thanks in advance
setul34 said:
okay now u can put your battery in. and push powerbutton + volume up button at the same time
and at the LG LOGO u can release power button but continue pressing volume up button.
---------- Post added at 11:01 PM ---------- Previous post was at 10:58 PM ----------
thats because you need to connect two point. and also make sure u have installed qualcomm drivers.
Click to expand...
Click to collapse
here are the drivers http://www.androidbrick.com/?wpdmdl=3173 both 32 bit and 64 bit but remember that you have to turn off driver signing if using a 64 bit OS.
I'm back to the same thing that I had before just the lg logo and it keeps rebooting.
l33tlinuxh4x0r said:
I'm back to the same thing that I had before just the lg logo and it keeps rebooting.
Click to expand...
Click to collapse
try to go back in downloading mod. if you cant then can u tell me what step u did in BoardDiag tool
---------- Post added at 11:15 PM ---------- Previous post was at 11:11 PM ----------
Evilix said:
please give me the right working link for the qualcomm drivers , thanks in advance
Click to expand...
Click to collapse
here you go.
http://www.androidbrick.com/download/qdloader-hs-usb-driver/
Hi guys,
I know there are plenty of posts about bricked phones and I've read most of them. Just want to do a sanity check here. If my phone has a LOCKED bootloader and USB debugging is NOT enabled, there is nothing I can do in terms of flashing an image right? I can enter bootloader and stock recovery, but when I boot to OS it bootloops.
Just want to confirm my only option is warranty claim with Google and there's no way to enable USB debugging other than from the OS?
Thanks in advance!
piotrus22 said:
Hi guys,
I know there are plenty of posts about bricked phones and I've read most of them. Just want to do a sanity check here. If my phone has a LOCKED bootloader and USB debugging is NOT enabled, there is nothing I can do in terms of flashing an image right? I can enter bootloader and stock recovery, but when I boot to OS it bootloops.
Just want to confirm my only option is warranty claim with Google and there's no way to enable USB debugging other than from the OS?
Thanks in advance!
Click to expand...
Click to collapse
Go into the bootloader and on a PC with adb run "fastboot flashing unlock" and see what happens. I don't think you need adb enabled to do it but I could be wrong so just try
---------- Post added at 11:14 PM ---------- Previous post was at 11:10 PM ----------
@piotrus22 another option would be to go into recovery and adb sideload the latest ota package from google.
Can you side load with debugging off?
Also have you factory reset from recovery?
DR3W5K1 said:
Can you side load with debugging off?
Also have you factory reset from recovery?
Click to expand...
Click to collapse
Not sure if you can but it wouldn't hurt to try. That night work too
Try to sideload the latest ota image.
Sent from my Pixel C using Tapatalk
piotrus22 said:
Hi guys,
I know there are plenty of posts about bricked phones and I've read most of them. Just want to do a sanity check here. If my phone has a LOCKED bootloader and USB debugging is NOT enabled, there is nothing I can do in terms of flashing an image right? I can enter bootloader and stock recovery, but when I boot to OS it bootloops.
Just want to confirm my only option is warranty claim with Google and there's no way to enable USB debugging other than from the OS?
Thanks in advance!
Click to expand...
Click to collapse
im having a similar issue. my phone just started to bootloop randomly yesterday, i tried to flash stock and once i get to the setup screen it shuts down and reboots...
thanks guys. i actually tried to sideload and was successful, but still no booting up. still get the boot loop. interestingly enough when i try to sideload again, i get an error message: device '(null)' not found
piotrus22 said:
thanks guys. i actually tried to sideload and was successful, but still no booting up. still get the boot loop. interestingly enough when i try to sideload again, i get an error message: device '(null)' not found
Click to expand...
Click to collapse
What were you trying to do to get it like that?
Veid71 said:
What were you trying to do to get it like that?
Click to expand...
Click to collapse
ok i was able to try to sideload it twice. side load finishes successfully but still doesn't boot to OS....
piotrus22 said:
ok i was able to try to sideload it twice. side load finishes successfully but still doesn't boot to OS....
Click to expand...
Click to collapse
Have you tried a factory reset?
DR3W5K1 said:
Have you tried a factory reset?
Click to expand...
Click to collapse
yes of course -
piotrus22 said:
yes of course -
Click to expand...
Click to collapse
Well unfortunately you're out of things to try.
If your phone happens to be a 128gb model this is actually quite common.
---------- Post added at 12:25 PM ---------- Previous post was at 12:11 PM ----------
Further confirmation of problems with some 128 units.
https://support.google.com/pixelphone/forum/AAAAb4-OgUsZ1zs71de3Io/?hl=by
I hope your phone is under warranty because Google won't do crap if it isn't. I'm a proud owner of a POS 128GB brick thanks to their junk they sell.
Sent from my [device_name] using XDA-Developers Legacy app