hey guy ...
i had the cyanogen 9.0 mod on my Sony Arc and i wanted to flash it back to 2.3 so that i could update my mobile to the officially released ICS for my model from sony... while flashing back the process failed due to some reason which was not even mentioned!
Later i started the process entirely again and the device successfully flashed ... but my mobile is not getting switched on at all... nothing is displayed... the device just vibrates wen i try to swtch t on ... PLease help me out ...
i even tried flashing it again :crying:
mankz1130 said:
hey guy ...
i had the cyanogen 9.0 mod on my Sony Arc and i wanted to flash it back to 2.3 so that i could update my mobile to the officially released ICS for my model from sony... while flashing back the process failed due to some reason which was not even mentioned!
Later i started the process entirely again and the device successfully flashed ... but my mobile is not getting switched on at all... nothing is displayed... the device just vibrates wen i try to swtch t on ... PLease help me out ...
i even tried flashing it again :crying:
Click to expand...
Click to collapse
nothing there ..on screen Sony/Android logo
can you enter download mode to flash again Cyanogenmod ?
Get flashtool and your rom and flash your phone. It should work now. happened to me many times, but flashtool saved the phone.
Hey, I just flashed Emotion Note II onto my phone and now it keeps saying apps are crashing and it restarts my phone, It also doesn't read my sim card anymore. It doesn't show the IMEI number and for baseband it says unknown
Can anyone help!?!?! I have tried flashing on different ROMs, odin flashing and unrooting my phone, when I tried putting on the stock rom it got stuck in a bootloop Please help!!!
firstly, plz forgive my poor english, my phone xperia acro s has stuck at the SONY logo while i switch on the phone, bcoz i try to flash the latest firmware to my phone b4, and always stuck at the flashtool with " reading mobile information ", after that, i flash the stock rom by using the flashtool, it failed to flash, it appear the words reading information (something like that) ....then , i tried to use the SEUS ,it said contains modified software....plz HELP.....can u help me to solve tis problem...?
Dear friends,
My canvas 4 mobile is stuck at booting image. rezone I rooted it and it works good for 2 days later I installed 3D Chainefire. and run it goes to reboot and stuck at boot logo.
I removed battery and and power on again its stuck at boot logo, I did it fo r 2 time doest work any.
then I go to recover mode as our forum suggested me and wipe the data/restore program and try to update custom ram speed Rebirth but its come ABORTED and I try it for 2 times, doesn't works.
then I tried even to flash the ROM. with Sp flash tool and MT6589_Android_scatter_emmc, But my phone not recognizes at all.
please help me to find out solution.
chejetikoti said:
Dear friends,
My canvas 4 mobile is stuck at booting image. rezone I rooted it and it works good for 2 days later I installed 3D Chainefire. and run it goes to reboot and stuck at boot logo.
I removed battery and and power on again its stuck at boot logo, I did it fo r 2 time doest work any.
then I go to recover mode as our forum suggested me and wipe the data/restore program and try to update custom ram speed Rebirth but its come ABORTED and I try it for 2 times, doesn't works.
then I tried even to flash the ROM. with Sp flash tool and MT6589_Android_scatter_emmc, But my phone not recognizes at all.
please help me to find out solution.
Click to expand...
Click to collapse
first full charge your phone,downlaod orignal stock rom, make you sure your mobile driver correctly installed in your pc,and then flash with sp flash tool. more for information try this procedure :
http://forum.xda-developers.com/canvas-4/general/guide-flashing-guide-sp-flash-tool-t2745892
---------- Post added at 09:31 AM ---------- Previous post was at 09:24 AM ----------
chejetikoti said:
Dear friends,
My canvas 4 mobile is stuck at booting image. rezone I rooted it and it works good for 2 days later I installed 3D Chainefire. and run it goes to reboot and stuck at boot logo.
I removed battery and and power on again its stuck at boot logo, I did it fo r 2 time doest work any.
then I go to recover mode as our forum suggested me and wipe the data/restore program and try to update custom ram speed Rebirth but its come ABORTED and I try it for 2 times, doesn't works.
then I tried even to flash the ROM. with Sp flash tool and MT6589_Android_scatter_emmc, But my phone not recognizes at all.
please help me to find out solution.
Click to expand...
Click to collapse
if you face connection problem with SP flash tools...then try this driver (install in your pc)
http://d-h.st/xkW
thank you.
007jigar said:
first full charge your phone,downlaod orignal stock rom, make you sure your mobile driver correctly installed in your pc,and then flash with sp flash tool. more for information try this procedure :
http://forum.xda-developers.com/canvas-4/general/guide-flashing-guide-sp-flash-tool-t2745892
---------- Post added at 09:31 AM ---------- Previous post was at 09:24 AM ----------
if you face connection problem with SP flash tools...then try this driver (install in your pc)
http://d-h.st/xkW
Click to expand...
Click to collapse
thank you so much, now its working I tried with new driver, so its done
Now I am facing new problem, with my WCDMA only mode,.. after flashing if I select WCDMA only mode network getting disconnected and showing Cross mork on indicater, previously I used WCDMA only mode on same mobile with same sim, I am using aircel Karnataka , and I am staying in Bangalore.. ANY Solutions for it,..
chejetikoti said:
Now I am facing new problem, with my WCDMA only mode,.. after flashing if I select WCDMA only mode network getting disconnected and showing Cross mork on indicater, previously I used WCDMA only mode on same mobile with same sim, I am using aircel Karnataka , and I am staying in Bangalore.. ANY Solutions for it,..
Click to expand...
Click to collapse
if you using stock rom...then take hard reset your phone...reinsert your sim.
I did hard reset and removed and inserted sim again, but still I am facing same problem. every time when I do hard Reset My mobile IMEI Numbers are Going to INVALID... why?
ok so the main issue is the IMEI number....are you backup your IMEI number ? try this i think it's help you
http://forum.xda-developers.com/showthread.php?t=2380700
yeh i am doing this always when do hard reset
007jigar said:
ok so the main issue is the IMEI number....are you backup your IMEI number ? try this i think it's help you
http://forum.xda-developers.com/showthread.php?t=2380700
Click to expand...
Click to collapse
I am doing this every time,, but after that only I am getting the WCDMA only not working problem, if I select network ball will crossed, no network for it, I checked the same sim in other mobile its working properly
IMEI number successfully installed or not? check the stock rom properly downloaded on your pc or not? again flash the stock rom...Actually i am alos NEWBIE..and i faced some soft-break problem in canvas...but the problem successfully solved with to flash the stock rom...so try it
007jigar said:
IMEI number successfully installed or not? check the stock rom properly downloaded on your pc or not? again flash the stock rom...Actually i am alos NEWBIE..and i faced some soft-break problem in canvas...but the problem successfully solved with to flash the stock rom...so try it
Click to expand...
Click to collapse
IMEI NUMBERS installing is successful I will try again to flash my phone again may ne it will work properly
installation aborted status 7
Plzz help me out guyzzz I tried to install this rom but it was showing error as installation aborted status 7
Now my phone is stuck on the logo plzz help me wat to do
Micromax q334
I face same problem on my micromax q334 please send driver link for my phone urgent.
Hi -
I installed the Stock GB in my device and after that Whenever I insert the SIM card the device gets hanged up, the device works fine without SIM very well. What could be the problem ?
xperianeov2014 said:
Hi -
I installed the Stock GB in my device and after that Whenever I insert the SIM card the device gets hanged up, the device works fine without SIM very well. What could be the problem ?
Click to expand...
Click to collapse
Check is the stock frimwere is for single sim varient or dual sim..and ..are you downloaded the rom..and also it may be due to unlocked bootloader..
xperianeov2014 said:
Hi -
I installed the Stock GB in my device and after that Whenever I insert the SIM card the device gets hanged up, the device works fine without SIM very well. What could be the problem ?
Click to expand...
Click to collapse
This was an error from my side. I did not flash the Modem and csc file. I flashed only the pda file.
After flashing all the 3 files I don't see the issue.