Phone dead due to improper update process - Upgrading, Modifying and Unlocking

hey guy ...
i had the cyanogen 9.0 mod on my Sony Arc and i wanted to flash it back to 2.3 so that i could update my mobile to the officially released ICS for my model from sony... while flashing back the process failed due to some reason which was not even mentioned!
Later i started the process entirely again and the device successfully flashed ... but my mobile is not getting switched on at all... nothing is displayed... the device just vibrates wen i try to swtch t on ... PLease help me out ...
i even tried flashing it again :crying:

mankz1130 said:
hey guy ...
i had the cyanogen 9.0 mod on my Sony Arc and i wanted to flash it back to 2.3 so that i could update my mobile to the officially released ICS for my model from sony... while flashing back the process failed due to some reason which was not even mentioned!
Later i started the process entirely again and the device successfully flashed ... but my mobile is not getting switched on at all... nothing is displayed... the device just vibrates wen i try to swtch t on ... PLease help me out ...
i even tried flashing it again :crying:
Click to expand...
Click to collapse
nothing there ..on screen Sony/Android logo
can you enter download mode to flash again Cyanogenmod ?

Get flashtool and your rom and flash your phone. It should work now. happened to me many times, but flashtool saved the phone.

Related

[SOLVED][Q] Phone not booting

Hi Guys,
I am new to the Xperia Arc LT15i.
I was trying to root it using one of the methods i say on youtube by downloading lt15i_4.1.B.0.431_ready to root.ftf and flash it thru the flashtool.
but it got stuck in flashing data. and nothing happened for a long time.. so i tried to restart it but now the phone wont boot.
any help plz
i was on buildno. 4.1.B.0.587
Did flashing ended succesfully? What happens when you discconect phone and try to turn it on?
DjDexter5GHz said:
Did flashing ended succesfully? What happens when you discconect phone and try to turn it on?
Click to expand...
Click to collapse
no its just stays at 2% flashing data.
i just gives a vbration then black sceen.. not even boot logo
finally solved by flashing the generic global firmware

Xperia Arc Boot Loop

I own a Sony Xperia Arc (purchased on June, 2011) and it doesn't work anymore without any explanation.
When I turn on the phone, it appears Sony Ericcson brand and then, mobile network carrier brand, but then, instead of appearing home, it appears again Sony brand and an infinite loop goes on.
At first,I tried to solve the problem with the Sony tools like PC Companion and Sony Update Service.
Then, I tried to do a hard reset (back + menu and power), but nothing changed (the same bootloop).
What would you do now? Would be useful trying to flash some firmware? I have been reading posts about flashing firmware, bootloader unlocking and rooting Xperia Arc, but I don't now really what would be the best move now.
For your information, I haven't applied any kind of official upgrade before, neither I have tried to root the phone or flash any custom firmware, so I had my phone as it came from factory (with Android 2.3.2). Moreover, I haven't installed any suspicious application, just typical apps like whatsapp and so on. By the way, the phone haven't suffered any crash neither wet.
I have attached the log I have taken when I try to turn on the phone (I get the same log again and again, at the end of the log it reports some problem with memory, I hope it's not a hardware problem):
Try using the Flashtool and report back. http://forum.xda-developers.com/showthread.php?t=1304634
XperienceD said:
Try using the Flashtool and report back. http://forum.xda-developers.com/showthread.php?t=1304634
Click to expand...
Click to collapse
Hi,
also have the same problem.
I have the same problem.
İ have lt15i firmware. Try to install lt18i via flashtool and something broken and aborted. I tried to install LT15i_4.0.2.A.0.42_(1247-1041).ftf via flashtool. It said flashed but said power on turn on unknown sources and devices. When i try to power on it boot loop in Sony Logo.
I try to use CWM mode. Wipe and flash some data. Couldn't find user data files. Installed a Custom ROM when a boot animation appear its boot again to SONY logo. what should i do?
Any ideas?
In the end, I could fix the problem flashing the latest firmware with Sony Update.
Anyways, thank you very much for the advice
Xperia arc problem
Hello, i have a problem since i tried to update my xperia arc to the last kit kat build, i flashed the kernel before installing the new rom, and now it simply reboot after legacyxperia logo, and when i tried to go to recovery menu it enters but doesn't show any options, only show the hat with the refresh symbol. If you can please help me.
Thank you, have a great day

[Q] How to Revive a Huawei Y300-0100?

Hi, i didn't know where to post so i just posted this here since i saw other huawei posts in here. (Moderators pls move if misplaced).
I've got a big problem!
I have got a Rooted Huawei Y300 and i've unofficially unlocked the bootloader with DC-Unlocker successfully, and have CWM Recovery installed!
Now here's the deal, i've downloaded Cyanogenmod 11 (4.4) but after i tried to install it, it stopped halfway with "set_metadata_recursive: some changes failed E:Error in /sdcard/name_of_rom_here" (Status 7).
I tried other CM's getting the same error.
Than i tried to reflash to original firmware (V100R001C00B175) from the huawei website, but since i bricked my phone i cannot move the "dload" folder to internal storage so i tried to place it on my sd-card and booting up using Vol- & Power, the upgrade stops at step 2/2 saying it failed.
I'm very sorry not having a backup of the original firmware before i tried CM out (a very stupid and hasty move).
Does anyone have a solution? The phone is just a week old and i've never bricked a phone before (all my old handsets from samsung's to sony's / htc's) and never failed installing a rom or anything related.
Frankly i never suspected CM to fail flashing since everybody else is succesfull ;-/
kind regards,
Ok here's a update. I managed to install AOKP (4.3.1) so i atleast revived my phone. I'm guessing it was something with CM11.
Anyway moderators you can delete this thread, since i found the solution myself..
Thanks
bricked huawei y300
JMailuhu said:
Ok here's a update. I managed to install AOKP (4.3.1) so i atleast revived my phone. I'm guessing it was something with CM11.
Anyway moderators you can delete this thread, since i found the solution myself..
Thanks
Click to expand...
Click to collapse
can you provide instructions on how revive? mine bricked it got stuck on boot logo after succesfully rooting then i installed chainfire 3d but after that when it reboots it got stuck on boot logo plsss help me on this..

[Q] gt-s7560m Bootloader

so i recently got this phone (gt-s7560m) in canada but now im in germany and rooted the phone but then a samsung update downloaded and now when it boots it starts with the trend logo then for a second the original. also my wifi on cyanogen doesnt work nor on the stock rogers rom it gets stuck on "Turning on..." i have to use another stock rom from australia ive tried flashing with odin new firmware. also the newest TWRP V2.7.1.0 doesnt show any kind of storage i have to use V2.6.5.0. I think the bootloader was replaced with the trend bootloader but i have no clue of what to do. Any help?
Yo90bosses said:
so i recently got this phone (gt-s7560m) in canada but now im in germany and rooted the phone but then a samsung update downloaded and now when it boots it starts with the trend logo then for a second the original. also my wifi on cyanogen doesnt work nor on the stock rogers rom it gets stuck on "Turning on..." i have to use another stock rom from australia ive tried flashing with odin new firmware. also the newest TWRP V2.7.1.0 doesnt show any kind of storage i have to use V2.6.5.0. I think the bootloader was replaced with the trend bootloader but i have no clue of what to do. Any help?
Click to expand...
Click to collapse
Ok ; ill try to help you but give me a few days to find the thinks that i need
rubend447 said:
Ok ; ill try to help you but give me a few days to find the thinks that i need
Click to expand...
Click to collapse
did you find any fixes or did you give up?
Yo90bosses said:
did you find any fixes or did you give up?
Click to expand...
Click to collapse
more or kess i know something ti try ; you cand do the same byt with something for your phone ; like a rom i think that if you use a temporal recovery and flas a rom for your phone you could change the boot again to your phone
or use odin volume down + home + power an full reinstal your phone fireware (i think that you should try this first)
also; did you tryed to flas clockworkmod recovery based?
if you need something or more help contact me (sorry for the time that i need to this response ;I just started my studyes and i havn't got ennought time for all )

Canvas A1 - Sprout 4 Hardbricked.SP Flashtool won't work.

My Canvas A1 isn't booting at all (nothing happens when power button is pressed),My phone has been unstable for quite some time now.Initially, I installed MIUI 8 and it crashed after one month or so.Then I installed Stock MM optimized version from XDA and it went well for sometime.Then after a month's period even stock OS crashed.Rebooted and stuck at bootloop.
After that I tried reinstalling the same OS but it always stuck at bootloop.
Hence,I went with SP Flashtool.Tried flashing (Download Only option) Official Lollipop FlashFile available here on XDA,it did flash successfully but phone wouldn't boot.
Next,tried All Format+Download option and again it flashed successfully but now nothing happens not even micromax logo shows up.Hence,I believe I have hard bricked my phone have tried every option that I could think of but to no avail.
I need expert advice on this hence posting it now.
Please Help.
Thanking in advance.
Sarvesh1 said:
My Canvas A1 isn't booting at all (nothing happens when power button is pressed),My phone has been unstable for quite some time now.Initially, I installed MIUI 8 and it crashed after one month or so.Then I installed Stock MM optimized version from XDA and it went well for sometime.Then after a month's period even stock OS crashed.Rebooted and stuck at bootloop.
After that I tried reinstalling the same OS but it always stuck at bootloop.
Hence,I went with SP Flashtool.Tried flashing (Download Only option) Official Lollipop FlashFile available here on XDA,it did flash successfully but phone wouldn't boot.
Next,tried All Format+Download option and again it flashed successfully but now nothing happens not even micromax logo shows up.Hence,I believe I have hard bricked my phone have tried every option that I could think of but to no avail.
I need expert advice on this hence posting it now.
Please Help.
Thanking in advance.
Click to expand...
Click to collapse
Can anyone please help.
same thing happened to me but no solution
bunny374 said:
same thing happened to me but no solution
Click to expand...
Click to collapse
Now I suspect it is a hardware problem.Probably motherboard has failed.
Same problem here. SP Flash tool flashing successfully but phone won't even boot up
Sarvesh1 said:
My Canvas A1 isn't booting at all (nothing happens when power button is pressed),My phone has been unstable for quite some time now.Initially, I installed MIUI 8 and it crashed after one month or so.Then I installed Stock MM optimized version from XDA and it went well for sometime.Then after a month's period even stock OS crashed.Rebooted and stuck at bootloop.
After that I tried reinstalling the same OS but it always stuck at bootloop.
Hence,I went with SP Flashtool.Tried flashing (Download Only option) Official Lollipop FlashFile available here on XDA,it did flash successfully but phone wouldn't boot.
Next,tried All Format+Download option and again it flashed successfully but now nothing happens not even micromax logo shows up.Hence,I believe I have hard bricked my phone have tried every option that I could think of but to no avail.
I need expert advice on this hence posting it now.
Please Help.
Thanking in advance.
Click to expand...
Click to collapse
Must be problem with your charger use frog charger that worked for me after using different usb cables it happens..

Categories

Resources