Don't know if this was posted already but these are the apn settings that finally made MMS work, I'm on at&t.
NAME: ATT Phone
APN: phone
Proxy: (not set)
Port: (not set)
Username:*(not set)
Password: (not set)
Server: (not set)
MMSC:http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
Authentication Type: none
APN type: default,mms,supl,hipri,fota
APN protocol: IPv4
Bearer: Unspecified
Sent from my SGH-T999 using Tapatalk
Related
For my friends on att what are your apn settings?
Sent from my GT-N7100 using Tapatalk 2
try these
http://forum.jakar.co/android-hack/1344973587/
Thank you thank you thank you.
It amazes me how people just leave and never press thank button or at least say thank you to a useful post. Discouraging behavior.
Thanks my CA friend
---------- Post added 11th November 2012 at 12:02 AM ---------- Previous post was 10th November 2012 at 11:57 PM ----------
Just in case that outside link become invalid in the future, i'm RE-POSTING the settings in this thread. I believe xda will hold as a server more stably so we can come back and check. The traditional "phone" + "wap.cingular" worked for me.
ALL CREDITS GOES TO Jakar from Jakar.co
Thanks
AT&T 2G / 3G:
Name: AT&T
APN: wap.cingular
Proxy: leave blank
Port: leave blank
Username:[email protected]
Password:CINGULAR1
Server: leave blank
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410
APN Type: leave blank
AT&T LTE:
Name: ATT PTA
APN: pta
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
Auth: none
APN type: default,mms,supl,hipri
AT&T HSPA+ (requires PHONE and MMS):
Name: ATT MMS
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username: -
Password: -
Server: -
MMSC: http://mmsc.cingular.com/
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC: 310
MNC: 410
Authentication Type: -
APN Type: mms,supl
APN Protocol: ipv4
Name: ATT PHONE
APN: phone
Proxy: -
Port: -
Username: -
Password: -
Server: -
MMSC: -
MMS Proxy: -
MMS Port: -
MCC: 310
MNC: 410
Authentication Type: -
APN Type: default,internet
APN Protocol: ipv4
Never mind. Dont post when your tired lol
Sent from my SGH-I717 using Tapatalk 2
I made the mistake of not checking those before flashing a new rom and it seems my performance is not as good now as it was. But then again, I am not testing on the same place.
I just entered this from another post:
AT&T APN Settings
Enter exactly as shown
Name: ATT LTE
APN: pta
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: none
APN type:default,admin,fota,mms,supl,hipri,internet
APN protocol :IPv4/IPv6
BEARER: LTE (default is unspecified) play with this one..
is that how the phone came by default?
Thanks!
APN settings:
Name: ATT Phone
APN: Phone
MMSC: HTTP://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
APN type: default,mms,supl
APN protocol: IPv4
Enable/disable APN: APN enabled
Bearer: Unspecified
these are mine
Thanks. Maybe is my current location then.
kanged from mobicity.com.au
Telstra Internet and MMS combined APN
Name: Telstra Internet
APN: telstra.internet
Proxy:
Port:
Username:
Password:
Server: wap.telstra.com/wap
MMSC: http://mmsc.telstra.com:8002
MMS Proxy: 10.1.1.180
MMS Port: 80
MCC: 505
MNC: 01
Authentication Type: CHAP
APN Type: default,mms (if you have an option in a drop down list for interenet + mms then select this option)
If the above APN settings do not work (they should for 90% of 4G devices, then please try the below separate APNs, for Internet and MMS)
Telstra Internet APN
Name: Telstra Internet
APN: telstra.internet
MCC: 505
MNC: 01
Authentication type: CHAP
APN type: default
Telstra MMS APN
Name: Telstra MMS
APN: telstra.mms
MMSC: http://mmsc.telstra.com:8002
MMS proxy: 10.1.1.180
MMS Port: 80
MCC: 505
MNC: 01
Authentication type: CHAP
APN type: mms
or this one seems to work for me.
Telstra
Name: Telstra Internet
APN: telstra.iph
Proxy:
Port:
Username:
Password:
Server:
MMSC: http://mmsc.telstra.com:8002
MMS Proxy: 10.1.1.180
MMS Port: 80
MCC: 505
MNC: 01
Authentication Type: none
APN Type: default,supl,mms
Should be in general section.
Sent from my GT-N7100 using xda app-developers app
Q&A section for Questions and Answers?
anyway at least I didnt put it in the dev section 8)
Here are the AT&T 3G APN network settings for our phone.
Name: Cingular 410
APN: wap.cingular
Proxy: Blank
Port: Blank
Username: [email protected]
Password: CINGULAR1
Server: cingulargprs.com
MMSC: http://mms.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: Blank
MCC: 310
MNC: 410
Authentication type: Blank
APN Type: default,supl,mms
APN protocol: leave as is
Bearer: leave as is
If you need another networks APN settings just let me know and I'll add it!
I got the native Hotspot working on gsm-unlocked RAZR M with Straighttalk/ATT sim!
(Not sure if this has already been posted, but I struggled with this for awhile, so I wanted to share).
It would always fail, and tell me to activate this feature call ATT.
All I had to do was edit the APN settings to include "dun"...and boom, it worked!
My APN settings:
Name: straight talk
APN: tfdata
Proxy: not set
Port: not set
Username: not set
Password: not set
Server: not set
MMSC: http://mms-tf.net
MMS proxy: mm3.tracfone.com
MMS port: 80
MCC: 310
MNC: 410
Authentication type: None
APN type: default,admin,fota,mms,hipri,dun (and no spaces after commas)
APN protocal: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
MVNO type: none