I brought the Moto G 3 days ago (Rooted, Bootloader Unlocked), a while ago, I dropped and chipped/broke a part of the plastic surronding the glass. Now, I am intrested in buying this case -->amazon.ca/gp/product/B00GY6XFAQ/ref=noref?ie=UTF8&psc=1&s=electronics<--
Is it strong enough to hold another drop? I like slim thin light cases. Thanks
jackydroid68 said:
Is it strong enough to hold another drop? I like slim thin light cases. Thanks
Click to expand...
Click to collapse
It's probably better than nothing, but I would not have too much faith in it.
I think cases like that are designed to prevent scratches and scuffs mostly. I don't see them offering much drop protection.
I bought a similar one too this from amazon uk ,it wont offer much protection as it doesn't even protect the top and bottom edges of the phone at all,its more to prevent scratches really,i also found the buttons hard too reach comfortably.
If you want protection without to much bulk i suggest a TPU case which i now use as this covers the edges of the phone.
I bought this from amazon:
Custodia in silicone per Motorola Moto G - trasparente turchese - Case Cover PhoneNatic di PhoneNatic http://www.amazon.it/dp/B00GXFRTI2/ref=cm_sw_r_udp_awd_berqtb1YG7PP7
Nice fit and feel. Good grip and thin, and comes with two screen protectors (I didn't try yet). Wanted it to get better grip, and to be more confident with my home marble surfaces. Till now, mission accomplished
Inviato dal mio XT1032 utilizzando Tapatalk
Related
Hi guys,
When I look at the forum, it's like advertisements of new products which doesn't tell me a lot. So can you please recommend me:
A case that:
doesn't require me to open some part to access the screen
protects the phone well against drops
is comfortable to hold and touch (my fingers won't get itchy etc.)
And a screen protector that:
protects without distorting the image quality and responsiveness of the screen
doesn't leave bubbles inside (I hate the bubbles) or fingerprints outside
is a little slippery so it won't be a hard job for me to move fingers on the screen
THANKS IN ADVANCE FELLAS!
There is a hybrid case, just search hybrid case sgs2 in amazon,
I'm perfectly happy with that.
Downsides:
- not so slim anymore
- more weight
But my phone feels safe
And I'd suggest the Mumbi-screen protectors,
but you'll still some have fingerprints.
But once applied right (not easy btw )
they fit perfectly
Muta
you can look at the case-mate tough or the otterbox commuter, they both rock.
i bought the case-mate a few days ago, waiting untill it arrives
I also recommend the cases that other posters have, for a screen protector look no further than this.
http://www.amazon.com/SGP-Samsung-Galaxy-Protector-Oleophobic/dp/B0056C3JT6
Ive just recieved a Zenus Air Jacket looks sleek and smart, they do a range of colours, and it comes with a screen protector too, although i tried to fit mine and some dust came out of nowhere and went onto my screen so i had to bin it , hopefully the gorilla glass will protect instead
http://www.mobilefun.co.uk/zenus-skin-air-jacket-series-for-samsung-galaxy-s2-i9100-white-p29786.htm
I have a transparent Casemate Barely There.
It's a bit rigid but I think is the thinnest case on sale.
The transparent one gives to the phone a nice shiny look.
Suggested
I bought a hardcase, but i had the problem with the echo voice !
i heard my own voice twice !
is the problem fixed now?
In my personal opinion i like otterbox for SGS2, fits well, it has a metal cover for back side and plastic covers for usb port and earphones, i have one.
Enviado desde mi Samsung Galaxy S II
perso
Personally, I bought a pack screen protector + white case on ebay.
You can search on ebay :
LOT 7en1 Housse Etui Coque Rigide/FILMS Protecteur Pour Samsung Galaxy S2 i9100
sold by citephone
I just tried different case.
I prefer hard cover.
I try
1) Phoenix tough case: i broke upper corner, rubber come out after a bit of time
Vote: 3/10
Price around 15€
2) Samsung Original Mesh Vent case: Too sensitive and since have hole the dust come in and leave and put it many times to clean i broke the upper corner. In any case it offer a very low protection
Vote 5.5/10
Price around 18€
3)Tpu soft cover gel from ebay: it is not so soft but offer a better protection than other but for it's material attire too many dust on the border. It offer a good grip
Price 5€
Vote 6.5/10 (for now)
At end i buy also Case-Mate Tough that have 2 layer protection but it has not arrived.
Arrived
Perfect case optimal protection and grip. 2 thing. Inside silicon collect dust and dont put while phone is on because it press power button to reboot
Incipio NGP case. Martin Fields screen protector.
A lot of people are recommending products that does not stand out. I prefer to make my phone special so it stands out when I take it out. I like sleek , high tech looking things and thats what this setup is about:
I am currently using metal black battery cover:
http://forum.xda-developers.com/showthread.php?t=1263780
with real aluminum black phone case: (see akiba slider or SZLF slider)
http://forum.xda-developers.com/showthread.php?t=1263780
(SZLF or china made version on ebay for $30, search i9100 metal case)
with ultra optics
http://forum.xda-developers.com/showthread.php?t=1263780
result is a Sleek phone with a premium metal feel to it. The ultra optics cancels out fingerprints while maintaining good optical clarity. (you may need to clean it still every 1 week or so like any protector)
If you are daring, remove the case and just replace the housing for 15$ on ebay every time it gets too scratched.
1xinfusion said:
If you are daring, remove the case and just replace the housing for 15$ on ebay every time it gets too scratched.
Click to expand...
Click to collapse
I got the Incipio NGP case as well and it is pretty sweet--has a great feel and is thin, although the back is a little bit too smooth but I still like it.
That is a good idea on the housing. I might try a white housing.
What is your opinion on a screen protector? I don't like how it adds a layer and changes the feel--and besides, the SGS2 has gorilla glass.
Hello Everyone I been reading a lot of forums on cases and right now I can't decide on the Spigen, ACase, or the UAG cases. I am looking for a case that protects decently, doesn't add so much bulk, good button access for the home/side buttons. I am extremely careful with my phone and work a corporate job, meaning I don't foresee it needing to be all out tough.
So what you do?
Thanks in Advance
Hi, I was in the same position you were, and wanted a case with not too much bulk, but good protection (just in case by some awful chance I DO drop my phone).
So I went with the Acase Superleggera Pro.
I personally love it. It adds a certain amount of bulk I feel the phone needed, the silicon does not attract dust in my pocket, the polycarbonate back doesn't show smudges or fingerprints much, and the buttons require no extra force to push either.
I have a Zagg Invisible Shield HD on the screen, but am considering removing it because I never scratch my screen (my Droid X STILL doesn't have a scratch on it after two years) and the lip from the case that goes around the phone, PREVENTS the screen from touching the surface when layed face down.
The cut outs for all the ports are perfect, and look great as well. Overall, I suggest the case if these features appeal to you.
However, I'm also buying a Spigen Neo Hybrid to see what all the fuss is about
Thanks for the reply and the info, I am just like you as I really take care of my device. But I just read the review on the ACase the paint is rubbing off? Have you had that happen to you yet?
Blutonic said:
Hi, I was in the same position you were, and wanted a case with not too much bulk, but good protection (just in case by some awful chance I DO drop my phone).
So I went with the Acase Superleggera Pro.
I personally love it. It adds a certain amount of bulk I feel the phone needed, the silicon does not attract dust in my pocket, the polycarbonate back doesn't show smudges or fingerprints much, and the buttons require no extra force to push either.
I have a Zagg Invisible Shield HD on the screen, but am considering removing it because I never scratch my screen (my Droid X STILL doesn't have a scratch on it after two years) and the lip from the case that goes around the phone, PREVENTS the screen from touching the surface when layed face down.
The cut outs for all the ports are perfect, and look great as well. Overall, I suggest the case if these features appeal to you.
However, I'm also buying a Spigen Neo Hybrid to see what all the fuss is about
Click to expand...
Click to collapse
I can't speak for two of the cases you mentioned, but I do have a black UAG case and I really like it. It's actually thinner than I thought it would be and is unique looking, if you like the look of it.
The screen protector it came with is pretty crap and not full coverage. I'm using a Zagg and so far (fingers crossed) it hasn't caused it to bubble up anyplace beyond the few spots I screwed up myself removing my metal bumper case I had picked up when I first got the phone.
How is the Button Issue that you have to hard press on the UAG case?
UlaTek said:
I can't speak for two of the cases you mentioned, but I do have a black UAG case and I really like it. It's actually thinner than I thought it would be and is unique looking, if you like the look of it.
The screen protector it came with is pretty crap and not full coverage. I'm using a Zagg and so far (fingers crossed) it hasn't caused it to bubble up anyplace beyond the few spots I screwed up myself removing my metal bumper case I had picked up when I first got the phone.
Click to expand...
Click to collapse
BEERINAT0R said:
How is the Button Issue that you have to hard press on the UAG case?
Click to expand...
Click to collapse
A little firm to push but nothing to worry about, on mine at least. I have a TPU case that is way harder to push. I saw somewhere (maybe this site) that someone cut one of the long sides of the power button and said it worked great after that. I never had to so YMMV
I had the spigen neo hybrid and sent it back the day after receiving it. I had the same button problem as everyone else although in fairness I don't think I had the revised edition.
I have had my Acase superlegerra pro now for about 5 days and I love it! plenty of grip and not too much bulk. buttons press perfectly and cutouts line up exactly.
I can't comment on the paint coming off issue as I haven't had it for long enough yet.
I am going to send my Spigen Neo back I got last week, buttons are bad on it, must be the non revised version. Seller has no clue and says its the latest stock they have.
twe69 said:
I am going to send my Spigen Neo back I got last week, buttons are bad on it, must be the non revised version. Seller has no clue and says its the latest stock they have.
Click to expand...
Click to collapse
they are pretty poor. I was disappointed cos the case looks good.
Hi guys, I need a new case but have a couple questions about the causes I've narrowed it down to. I'm a student so I want to eliminate the need for having to buy another case if I dislike my purchase.
I have 2 tpu cases currently that were cheap at local cell shops.
The first one flexes too much where the volume rocker is so it causes my screen protector to bubble every time I press it. SUPER annoying.
The second seems to be somehow scratching the edges of glass that arent protected by my screen pro.
I'm guessing this case is a bit looser and has minimal movement and allows small particles to find their way in between the glass and the case.
I'm torn between two cases and I need some info on them that I havent been able to find reading the forums or from watching youtube reviews.
1) Incipio frequency: My main concern with this case is the sides flexing and causing my screen protector to bubble. Is there anyone that owns this case and can comment on this?
2) Seidio Surface: I've always wondered about just how snug these 2 piece cases are. Does the phone have enough space in the case that it is allowed to rattle at all? or is it just snug enough to keep the phone stable without scratching it?
COLES NOTES
-Need new case
-Incipio frequency or Seidio surface
-Will incipio case cause screen pro to bubble when volume rocker pressed
-Will seidio surface slowly scratch away at the aluminum finish/curved glass edges
All input is appreciated:cyclops:
So I'm writing this because of the "All input is appreciated"
Will you consider a third case? If so, take a look at the Trident Aegis case. You can find it brand new on eBay for $20 with shipping. I've used their cases before and they look extremely nice and on top of that, they do a good job with protecting the phones. I bought one brand new from eBay and I just got it today. It looks really top-notch. I'm waiting for my phone to come in. Hopefully I'll have it tomorrow so I can play around with it and give you some more feedback on Friday.
I've had the Seidio surface for over a month and so far no scratches on the glass or aluminum body. The inside of the case is soft with a carbon fiber sticker covering the inside. The phone fits snuggly but I can see a problem if you use a thick screen protector because of the tight fit.
All the cutouts are perfect with a nice beveled edge for the camera.
The case doesn't add a lot of extra bulk, which is the reason I got, I hate giant bulky cases.
Thanks for the replies guys!
I checked out the Triden Aegis but there's something about it I just didn't like.
I ended up ordering an incipio dual pro. I like the fact that the silicon insert seems to be more rigid than normal silicon inserts
I have a surface and uag. Had the surface first and like the feel but it doesn't really offer much protection. I saw the write-up on the uag and gave it a try. My surface stays on the ready but I haven't used it since receiving the uag.
Sent from my M7 using Tapatalk 4 Beta
Testingchip said:
I have a surface and uag. Had the surface first and like the feel but it doesn't really offer much protection. I saw the write-up on the uag and gave it a try. My surface stays on the ready but I haven't used it since receiving the uag.
Sent from my M7 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Thanks for all the suggestions guys!
My incipio dualpro finally came in and I have to say I'm pleasantly surprised. I had my doubts after ordering that it would be too bulky or the silicon insert would be too flimsy.
I'm pleased to say that this case exceeded my expectations. There is some bulk added, however it isnt bad. It gives the phone some heft and just feels a little more solid. Fitment is perfect.
The only negative so far is that the volume rocker is a little harder to press
Case name/model: Rearth Ringke Slim for Moto G (in white)
Case type: Slim, hard plastic 1 piece snap on
Needs/Niche for case: I wanted a temporary non-bulky case for my new Moto G before I decide between the official moto g bumper shell covers (out ~mid jan?) or a more robust solution like Otterbox.
Cost: G~$10 with free shipping + a decent (dry apply) screen protector included (1 count) from Amazon.
Pros:
- Case fits the Moto G like a second skin, very lightweight you barely notice it there.
- Well-made, I noticed some molding seams on the outside (faint) but none on the inside of the case - all smooth.
- All the ports (see photos below) and buttons are exposed clearly and I was able to charge and use headphones without any obstruction.
- There's 1-2? mm of clearance off the surface because of the lip of the case, so your screen isn't touching whatever surface you've put your phone face-down on.
Cons:
- While the case is easy to slide on, it was very difficult for me to take it off when I was a) worried about scratching the phone while doing it and b) worried about snapping some of the plastic off. There's no instructions included as to the proper way to slide it off, there's a video for the same model showing how to take it off from Rearth (must be a common issue) but it's for a different phone with different cutouts in the case.
- 50% of the corners are exposed (probably to allow you to uncase the phone more easily). This is the biggest con for me because in phone drops it's usually corner drops that cause screen shatter.
- It's entirely made out of hard plastic, no softer material or rubberization coating on the inside. However the case is a very snug fit so I doubt the phone would get scratched up from any sliding within the case.
Conclusion: For $10 it's a very well-made, high quality case. It feels durable (plastic doesn't feel like it's going to snap when I'm trying to pry it off) and it looks great. If all you want is scratch protection for the sides and back this will do the job and feel like next to nothing and look beautiful. If you're like me and drop your phone on occasion, you'll probably want to invest in a case that covers the corners more completely.
angomy said:
Case name/model:
Conclusion: For $10 it's a very well-made, high quality case. It feels durable (plastic doesn't feel like it's going to snap when I'm trying to pry it off) and it looks great. If all you want is scratch protection for the sides and back this will do the job and feel like next to nothing and look beautiful. If you're like me and drop your phone on occasion, you'll probably want to invest in a case that covers the corners more completely.
Click to expand...
Click to collapse
Thanks for your review, I should hopefully be getting mine soon from the US (dispatched on boxing day to the UK). Its a black one so ill add some pics and a lil review too.
Thanks for the post, i have one being shipped to me too (also in UK)
I went for black, but the white does look cool :good:
After having used it for a few days, I have to say that I really like it, and if I wasn't so accident-prone it would probably be the case I would be using on a daily basis. As it is, it's the case I'll be using until the Moto G official bumper shells come out.
I think you'll be pleased with it, it really is a very nice premium-feeling case.
I got the black version and its basically the same material as the back of the new nexus 5. Its a soft touch plastic that has a real premium feel. Its obviously a premium price at 9.99£ but well worth it IMO. I'll report back with durability testa
Sent from my XT1032 using XDA Premium 4 mobile app
Thanks for the review! I have the black one also, but I just ordered a white one because of its colour. After using it, does any colours rub on to the white? i.e does it get dirty quicky?
I agree with the cons of your review. I also have a Rearth Ringke Slim for my Moto G, except mines is black. Although, I find it hard to remove the case and it feels like I have to break the case and/or the back cover to get it off. I find the back cover's lip actually seems to be the reason why it is so hard to remove the case.
n3ik said:
Thanks for the review! I have the black one also, but I just ordered a white one because of its colour. After using it, does any colours rub on to the white? i.e does it get dirty quicky?
Click to expand...
Click to collapse
I usually carry it in a bag or in my inside coat pocket (the wallet? pocket inside the actual front of a coat), so I haven't seen if anything like denim would transfer. From regular use though it's still pristine, I haven't wiped it down because I don't see fingerprints on it or any visible dirt.
Thanks for your review. I ordered black one today.
Ordered the white version today, will post a review when it comes in.
looks like a case with good drop protection
http://www.ebay.com/itm/AMZER-BLACK...L-/121649568822?ssPageName=ADME:B:BOC:US:1123
This one is great!!! http://m.ebay.com/itm/281684193800?varId=580689263837&txnId=1374093401018
bloodomen2 said:
looks like a case with good drop protection
http://www.ebay.com/itm/AMZER-BLACK...L-/121649568822?ssPageName=ADME:B:BOC:US:1123
Click to expand...
Click to collapse
I just got this case yesterday, I ordered on May 5th and I received it on May 13th. Very fast shipping from US to Canada. Case looks and fits nicely, the edges are glossy but the back of the case has a nice matte finish with that "Amzer" logo. As for drop protection, It would probably survive, but keep in mind that the case is very thin (about 1 mm thick on all sides). It's not like an Otterbox case, but I prefer these types of thinner cases.
These are one of the nicest ones available right now besides the generic unbranded tpu cases, and I'm also waiting for this one to come in the mail: http://www.ebay.ca/itm/C1-NILLKIN-N...t=LH_DefaultDomain_0&var=&hash=item35e86b1904
I ordered this case a couple of days ago and will be making a quick review on it as soon as I get it via YouTube. I feel like there's a lack of cases or information on this phone and I want to contribute.
Sent from my ASUS_Z00AD using XDA Free mobile app
lordpipa said:
This one is great!!! http://m.ebay.com/itm/281684193800?varId=580689263837&txnId=1374093401018
Click to expand...
Click to collapse
i dont like the generic rugged cases their materials feels too cheap and flimsy
i usually buy UAG cases for my devices
KevOne said:
I just got this case yesterday, I ordered on May 5th and I received it on May 13th. Very fast shipping from US to Canada. Case looks and fits nicely, the edges are glossy but the back of the case has a nice matte finish with that "Amzer" logo. As for drop protection, It would probably survive, but keep in mind that the case is very thin (about 1 mm thick on all sides). It's not like an Otterbox case, but I prefer these types of thinner cases.
These are one of the nicest ones available right now besides the generic unbranded tpu cases, and I'm also waiting for this one to come in the mail: http://www.ebay.ca/itm/C1-NILLKIN-N...t=LH_DefaultDomain_0&var=&hash=item35e86b1904
Click to expand...
Click to collapse
dose it at least have a lip to protect the screen ?
i ordered a nillkin glass screen protector but i usually also match it with a case that have a decent lip
the bigger they are the harder they fall :laugh:
i might also order that nillkin tpu from the link for a try... dust plugs are a nice addition
bloodomen2 said:
dose it at least have a lip to protect the screen ?
i ordered a nillkin glass screen protector but i usually also match it with a case that have a decent lip
the bigger they are the harder they fall :laugh:
i might also order that nillkin tpu from the link for a try... dust plugs are a nice addition
Click to expand...
Click to collapse
Yes, it does have a lip that covers that entire phone, it keeps the screen at least 1 mm off the ground when you put it face it down. And yeah, I can't wait for that Nillkin case, it covers everything on the phone from the headphone jack, volume buttons and charging port. Everything except the camera
bloodomen2 said:
dose it at least have a lip to protect the screen ?
i ordered a nillkin glass screen protector but i usually also match it with a case that have a decent lip
the bigger they are the harder they fall :laugh:
i might also order that nillkin tpu from the link for a try... dust plugs are a nice addition
Click to expand...
Click to collapse
I have this case, which I feel matches the nillkin tempered glass screen protector very well. (looks like they may be OOS for the ZF2)
I received the Amzer case two days back. I'm not too happy with the case and wouldn't recommend it to anyone.
The pros are...
1. It covers all the sides and has a lip the protects the screen.
2. The buttons have neat cutouts.
3. The back is a nice Matt finish.
The cons are...
1. The case is slightly loose on the lower side near the USB port.
2. The sides have an unfinished sharp edge running across all 4 sides. This spoils the feel of the case when you hold it in your fingers.
3. Glossy sides spoil the look and make it look cheap.
4. On two sides there's a small extrusion that looks like an unfinished factory flaw from the moulding process.
In the past I have used TPU cases from vendors like Diztronic and I have to say the quality of those cases was way better. For the price Amzer is charging for this case they should have delivered a quality product.
I got this case from eBay UK:
http://www.ebay.co.uk/itm/301580146391?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
And I can recommend it. Cutouts are good, it's slim but still just overhangs the screen to protect it. In fact, you hardly notice it when it's on.
bloodomen2 said:
dose it at least have a lip to protect the screen ?
i ordered a nillkin glass screen protector but i usually also match it with a case that have a decent lip
the bigger they are the harder they fall :laugh:
i might also order that nillkin tpu from the link for a try... dust plugs are a nice addition
Click to expand...
Click to collapse
I have the Nillkin TPU Nature case. I really like the feel and keeps the device feeling slim. The dust plugs are nice, and the power button is easier to use with the case on.
alose said:
I have the Nillkin TPU Nature case. I really like the feel and keeps the device feeling slim. The dust plugs are nice, and the power button is easier to use with the case on.
Click to expand...
Click to collapse
I received mine today. It has already become my favorite of four cases I have received thus far (Nilkin, Amzer, Sparin, Einzige).
alose said:
I have the Nillkin TPU Nature case. I really like the feel and keeps the device feeling slim. The dust plugs are nice, and the power button is easier to use with the case on.
Click to expand...
Click to collapse
So this case covers the buttons on the phone? All the other cases just leave a cutout, which i imagine would make them hard to press.
cmendonc2 said:
So this case covers the buttons on the phone? All the other cases just leave a cutout, which i imagine would make them hard to press.
Click to expand...
Click to collapse
Yes the case covers the buttons, and are easy to press. The power button is actually easier then without a case.
I have another TPU case and has cutouts. The volume buttons are still accessible with that one, but the power button is a real pain to press.
just received the nillkin tpu case
very nice case for the price its well built barely adds any bulk and provide decent protection
The original Asus case seems good, with textured finish that should give good grip:
http://www.bhphotovideo.com/c/product/1147172-REG/asus_90xb00ra_bsl2n0_bumper_case_for_zenfone.html
I haven't ordered it yet, but so far is my first consideration. It seems better than other cheap TPU cases I've looked at. as most of them seem to have a smooth finish and seem slippery. I also don't like the "shiny" look most of these TPU cases have.
I ordered this one grey
For ASUS ZenFone 2 ZE551ML ZE550ML Dual Layer Plastic And Silicone Case For ZenFone2 5.5INCH Armor Hybrid Combo Phone Case
http://www.aliexpress.com/item/For-...ne-Case-For-ZenFone2-5-5INCH/32362634172.html
(from AliExpress Android)
onesky said:
I ordered this one grey
For ASUS ZenFone 2 ZE551ML ZE550ML Dual Layer Plastic And Silicone Case For ZenFone2 5.5INCH Armor Hybrid Combo Phone Case
http://www.aliexpress.com/item/For-...ne-Case-For-ZenFone2-5-5INCH/32362634172.html
(from AliExpress Android)
Click to expand...
Click to collapse
Sweet....looks like a non-spigen made slim armor....just might be what i need!