[Q] Problem activating re-built phone - Samsung Epic 4G Touch

I broke both the screen and the USB port on my D710, so I got on eBay and ordered another phone. The replacement one I found has a broken camera and SD card reader, which is no problem since mine work fine. The ESN is advertised as being clean.
Upon receiving the phone, everything looked great and I replaced the broken parts with my own working ones to make a fully functional D710. I got on Sprint's webpage and activated the phone using the MEID and Sprint's page says the phone is activated. However, the phone won't acknowledge that it has been activated, and always says it's roaming and on 1xRTT. PRL and profile won't update. I did a one-click wipe and reinstall of GB27 and that didn't fix it either. Lastly, a Sprint tech took his swing at it and couldn't get it to activate either after a couple hours of trying.
Does anyone know any tricks for getting a stubborn phone to activate? Or, does anyone know what is happening that is preventing it from updating?
Thanks!

It turns out that whoever had the phone before me had loaded an unusual PRL. I realized this when I discovered that I had to enable international roaming in order to get a connection, then checked the PRL version to find a really weird (custom?) PRL had been loaded.
I used this link to upload a Sprint PRL: http://forum.xda-developers.com/showthread.php?t=1267893
Note that the MSL on the phone is 000000 since it was a clean ESN and unattached to any account (that it knew of, at least.) After loading a Sprint PRL and activating the phone online, I was able to get voice and 4G but not 3G and the phone still showed an MSL of 000000. I took it to Sprint, and they did a hands-free activation which fixed it right up.

Related

[Q] What will I need to get EVo working on my CDMA netowork.

Hi, I am currently in bermuda and I am stuck using my iphone... I would rather use my EVO. The CDMA network in bermuda is called Cellularone Bermuda.
www(dot)cellularone(dot)bm
I am asking what do i need to get my EVO working on that network.
it's 800mhz.
What other information what I have to find out and how could can i put it on their network.
Thanks.
bump? halp
Call them up and ask them to change your ESN. You'll need to get that from inside the phone under the battery (IIRC). There's a chance they won't do it because it's not their phone, but that usually is only between Verizon and Sprint. Smaller CDMA markets will sometimes do it.
ok, thanks! and what do i do with the ESN?
anymore help?
sonikot said:
ok, thanks! and what do i do with the ESN?
Click to expand...
Click to collapse
You give your local carrier the ESN and ask them to activate it. They may not be able to.
if they add your esn, thats all youll need (that and a reboot) theyll activate, youll reboot, and you should be all set.
ok, so i just went there and the phone seemed like it accepted my ESN and it made a "conversion" of it or something so it SEEMED like it was on the network but it stayed roaming.. i reread and she didnt restart is that imperative to it switching networks?
Also is the EVO locked to sprint? or is just as simple as an ESN? IF so do i just put a new rom to unlock it? which rom?
still looking for answer
After they get your ESN swapped over, you should do a factory reset ( you need your MSL for that, lookup those procedures).
THEN. update your Profile and PRL. You may get by without the factory reset if you just go do the Profile and PRL updates.
lafrad said:
After they get your ESN swapped over, you should do a factory reset ( you need your MSL for that, lookup those procedures).
THEN. update your Profile and PRL. You may get by without the factory reset if you just go do the Profile and PRL updates.
Click to expand...
Click to collapse
Ok So I call sprint and get my MSL.
How exactly do i do a profile and PRL updates?
hey thanks for reply. So i went back to the company got my esn switched over again and tried the prl and profile update that didnt work. So i did a factory reset and tried again it didnt work for some reason it keeps trying to connect to sprint network. the customer rep said the phone moved over to the network sucessfully. any clue? i got error 67 and error 1012 the second time. it's just keeping the sprint information in

Default Verizon PRL needed

Hey gang,
I bought a used Droid Inc. It has a good ESN with Verizon, but the previous owner had it flashed to Cricket to save money on his monthly bill. I confirmed the ESN is good with Verizon.
These are my attempts thus far to return the phone to the Verizon network:
I reloaded the stock 2.2 software, but it was still on Crickets towers.
Next, I placed a Verizon PRL file (found online, but not sure if it is the right one for this phone) on my SD card, dialed ##775# then 000000 and installed the new PRL.
The phone is now on Verizon's network, but It doesn't turn on 3G data at all.
I tried *228, *22890, *22891, *22899, etc.to update the PRL... but each time it tried the "Programming" part would always end the call after about 10 seconds with a voice message stating my phone could not be programmed.
NOTE: I have not activated the phone yet, so it is without service. Local Wifi only. That shouldn't matter... but thought I would supply all available info =)
Can anyone supply me with a good PRL file for the Droid Incredible?
... or just point me in the right direction
Thnx,
Syn
This happened with my moms phone, you have to manually activate it, I don't quite remember how but give Verizon a call about it.
Sent from God, who uses OMGB-6.
LOL, if you have activated the phone yet....... no 3G... haha
Had the exact problem. I activated on my line and had no 3g and took to verizon store and nobody there could figure it out so the manager overnighted new a brand new one!! Just do that!!
Sent from HTC Droid Incredible
one time on my eris I downloaded a 3g toggle and left it off when deleted it and couldnt get 3g back til i re-downlaoded the app left it to on and deleted it. FWIW
updating to verizon's PRL OTA is *228, opt 2.
PRL update wont pass if the phone isnt activated on the network.. you must activate the ESN with VZW and do an OTA *228 opt 1. If that fails, a manual program is required, and VZW can help you with that over the phone..
(...i kinda work for verizon? but this isn't private info or anything..)
Try this - should be able to d/l a prl & install before activation.
http://forum.xda-developers.com/showthread.php?t=723829

[Q] Just got service, already have MMS and internet issues - EVO Cricket

Hi everyone, I bought an Sprint HTC Evo 4g that had been flashed to cricket wireless. When it had no service the cricket "welcome to cricket" voice would answer, then one day it reverted to sprint. Anyways, I just got it hooked up with the $55 dollar android plan, only to discover that MMS (picture messaging?) and the mobile internet aren't working.
So my questions are:
1) Is there a solution to this problem? (I've searched for and tried a few things alerady)
2) Is it possible to simply re-flash the phone even though I have activated service. (also, my usb port is broken so I'd have to do it through a micro sd adapter if possible)
3) any other solutions I don't know about?
I have no idea what rom (or whaterver it's called) I'm currently running, but I can do the ##3283# (DATA) thing, and the menu and all those settings will pop up, if that helps at all. If needed, I can provide all of my current ##DATA# settings.
So please let me know if you can help, and thanks in advance!
are you sure data is actually activated on your plan? I know it took me about 10 phone calls before a tech finally realized that the android data service was not active on my account.
Also, you say the phone was already flashed to cricket? Did the person you bought it from preprogram it for your account? The phone has to be programmed via QPST with your phone number in various places in order for data to work properly.
If you don't have a functioning usb port then it is going to be impossible to program the phone via QPST and get it working correctly.
In addition, without data MMS is not going to work. You need to get data working first.
First of all, thanks for the reply! And yeah, I just called and they said it's on the $55 plan.
Yes, it was already flashed when I bought it. We actually just added it to our current account and the cricket rep. changed it to a new number. And in the ##DATA# settings, I put in my own number. Also, I have no idea what QPST is, sorry, I'm new to this whole phone flashing.
Its not possible through the sd card? because the usb port broke off... How could I get data to work?

[Q] phone always in roaming

I just bought a used DINC2 with the intentions of using it on Page Plus. I've factory reset the phone and it's running stock Gingerbread 2.3.4. I've noticed that the phone is always showing the roaming indicator. (I currently use an LG VX5500 flip phone on Verizon and it is never in roaming.) So, I've tried dialing *228, option 2 to update the PRL as I've seen mentioned but it's always unsuccessful (it dials but then comes back with a message that it was unsuccessful - probably because the phone isn't currently activated). I'm afraid to activate service on the phone if it has a problem and I can't call Verizon support to help because it's not activated with Verizon. Will activating the phone likely fix the problem? Any suggestions?
So the phone isn't activated but you see the roaming symbol because possibly it's trying to find an active Vetizon signal. Once activated n it knows the signal I'm 94.6% sure it won't be roaming anymore.
Sent from my forgotten by HTC Droid Incredible 2. Kept alivw by great minds at XDA that haven't forget this phone.
I went ahead and activated the phone with Page Plus and roaming is gone now. The phone must have lost it's programming because when I activated it, there was a list of things that got programmed (including the PRL). I activated another phone and it didn't do any of that on activation. Anyway, long story short, activated the phone and roaming is gone!

Network Connection Issue

I've been using an S4 for about 2 weeks now, no problem. Last night I realized a text I sent never went through, and today my lock screen says "No Service" or "Searching" (despite the device showing full signal). I can't send/receive calls or texts, and I don't use a data connection. This SIM is also new (~2 weeks), and the device is neither rooted nor running a custom ROM. I've tried everything I could think of, like:
reboot
pull battery and SIM
confirmed APN settings on t-mobile site
tried alternate, non-"LTE" APN (epc tmobile com)
tried every network mode setting (GSM, GSM/WCDMA, etc.)
reset APN to default
turned on mobile data connection
manually scanned for networks (wouldn't connect to AT&T or T-mo)
select network automatically (wouldn't connect)
complete factory reset
I tried my SIM in another T-mo phone and it works; tried a different SIM in my S4 and it doesn't work. All other T-mo phones in my household are working fine. My S4 is definitely the problem here, but I don't see how the radio would just stop working after 2 weeks.
Has anyone else experienced/seen this? I never have, and it's driving me up a wall. I'm going to try my local T-mo store tomorrow, but I was hoping to fix it before then. Any help is greatly appreciated.
EDIT: I purchased the phone new on ebay. For a minute I thought the seller might have reported the phone stolen, but I checked the IMEI and it's clean.
Ive experience this but my service came back in about 25 minutes I did reset reboot battery pull sim pull it just came back on its own
Unrooted Samsung Galaxy S4 Up and Running
Rooted Mytouch 4G Slide retired
Rooted T-Mobile Sidekick Touch Obliterated
Rooted Mytouch 3G Slide Lost
Rooted T-Mobile G1 Dead
So I finally got to T-mobile today. Unfortunately, my hunch was right: the IMEI is blacklisted. Their in-house system must be more up to date than their web IMEI checker.
Time to solve this issue elsewhere.

Categories

Resources