hello I try to flash my T999 after reboot it does not want to turn on , no combination works , when I plug it to the PC it told me I was unknown device , i take to repair they saying that it will repair with gpgemmc but after he told me that its not going he told me that it my be the EMMC is dead or my micro usb connector is not good and it prevents the gpgemmc pass the flash boot
does the micro usb connector is necessery for the gpgemmc or the jtag i dont think !
boys501 said:
hello I try to flash my T999 after reboot it does not want to turn on , no combination works , when I plug it to the PC it told me I was unknown device , i take to repair they saying that it will repair with gpgemmc but after he told me that its not going he told me that it my be the EMMC is dead or my micro usb connector is not good and it prevents the gpgemmc pass the flash boot
does the micro usb connector is necessery for the gpgemmc or the jtag i dont think !
Click to expand...
Click to collapse
Nothing is dead or not good!
You just screwed the kernel and Only Samsung can fix it because i also had same problem.
Only Samsung or professionals can fix this.
f_u_006 said:
Nothing is dead or not good!
You just screwed the kernel and Only Samsung can fix it because i also had same problem.
Only Samsung or professionals can fix this.
Click to expand...
Click to collapse
i have read that is the sudden death and the motherboard must be remplaced!
Have you tried the unbrick thread?
Sent from my SGH-M919 using Tapatalk
serio22 said:
Have you tried the unbrick thread?
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
can you give me a link !
Its a sticky in android development
Sent from my SGH-M919 using Tapatalk
Related
Hello,
This morning I want to make my own custom rom with kitchen dsixda.
after the first boot has hung at boot animation.
in the horizontal format i could see a part of the home screen and I want to restart the phone.
it will not turn on anymore and if I plug in phone via usb to computer message comes QSUSB_DLOAD driver is not installed.
No download and no recovery mode possible.
I pull out battery about 20 minutes...nothing.
I'll send it to SCS. I have called and said there that phone will not turn on anymore.
There were no further questions on the hotline.
The question:
can thay see that I had custom rom on my phone.
Then my warranty is gone.
Or is there away to repair the phone itself with some tools??
Greetz
Asmir GT
Google JIG
_jis_ said:
Google JIG
Click to expand...
Click to collapse
i have already searched for it.
but i have no jtag riff box to repair a bootload partition.
the phone is dead.i mean only resistor jig can't fix it???
AsmirGT said:
i have already searched for it.
but i have no jtag riff box to repair a bootload partition.
the phone is dead.i mean only resistor jig can't fix it???
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=Rdn5GoRjhn0&feature=youtube_gdata_player
Sent from my GT-I8150 using Tapatalk 2
andynroid said:
http://www.youtube.com/watch?v=Rdn5GoRjhn0&feature=youtube_gdata_player
Sent from my GT-I8150 using Tapatalk 2
Click to expand...
Click to collapse
allready seen on youtube.
but i mean my phome ist fully briked.completly dead.
no charge,no download or recovery mode possible.
odin doesn't recognise my phone anymore
i have send my phone today to SCS.
Let see when my phone is back.
that's probably the solution bei e***y for 30 Euro+Shippcosts but i have already samsung warranty or not???
http://www.youtube.com/user/MobileTechVideos
I tried to install a customized rom for the first time into my Samsung Gio, but something went terribly wrong. I had rooted my device, and I was using CWM, but I think I managed to screw up my recovery partition, and possibly the whole system, using it..
I can't get into downloading mode by the button combo (volume down + home + power). The screen stays blank whatever I do... However, I'm able to get Odin to detect my device when I press all buttons and then insert battery. But still, I can't enter the download mode, and I guess this is the reason why Odin fails when setting up the connection.
Is there some way to access my device using adb without having direct access to my device (which is why I can't set USB debugging mode)? Can I boot Android only from SD card?
I'm running out of ideas...
EDIT: I found out info about USB jigs. I'm trying to build one myself, because I only need 301kohm resistor and microusb connector. I'll let you know if it works.
remove the battery for 1 minute and try it again... this is my only idea
Don't be afraid to hit the thanks button. It doesn't bite. lol
Sorry for my bad englisch
systemdown said:
I tried to install a customized rom for the first time into my Samsung Gio, but something went terribly wrong. I had rooted my device, and I was using CWM, but I think I managed to screw up my recovery partition, and possibly the whole system, using it..
I can't get into downloading mode by the button combo (volume down + home + power). The screen stays blank whatever I do... However, I'm able to get Odin to detect my device when I press all buttons and then insert battery. But still, I can't enter the download mode, and I guess this is the reason why Odin fails when setting up the connection.
Is there some way to access my device using adb without having direct access to my device (which is why I can't set USB debugging mode)? Can I boot Android only from SD card?
I'm running out of ideas...
EDIT: I found out info about USB jigs. I'm trying to build one myself, because I only need 301kohm resistor and microusb connector. I'll let you know if it works.
Click to expand...
Click to collapse
If still it doesn't, then there's another way & that is:- Riff Jtag box. It'll definitely unbrick your GIO.
Hope this helps...
Sent Via XDA™ Premium
You can get a usb jig for less than 2 dollar or something if making your own doesnt work
Sent from my GT-S5660 using xda app-developers app
voetbalremco said:
You can get a usb jig for less than 2 dollar or something if making your own doesnt work
Sent from my GT-S5660 using xda app-developers app
Click to expand...
Click to collapse
Today I tried makying an own usb jig, but it doesn't seem to work... Now I'm getting a bit desperate here :S
On ebay are lots of them...
Sent from my GT-S5660 using xda app-developers app
Galaxy_Rohit said:
If still it doesn't, then there's another way & that is:- Riff Jtag box. It'll definitely unbrick your GIO.
Hope this helps...
Sent Via XDA™ Premium
Click to expand...
Click to collapse
What's Riff Jtag box, where can I get one and how much does it cost? Gio is not that expensive phone, so I don't want to spend too much money trying to repair it. I wonder how much it would cost if I sent this to Samsung..
systemdown said:
What's Riff Jtag box, where can I get one and how much does it cost? Gio is not that expensive phone, so I don't want to spend too much money trying to repair it. I wonder how much it would cost if I sent this to Samsung..
Click to expand...
Click to collapse
Well...I've not bricked my phone... So I don't know about cost.
But Here's the official Riff Jtag webpage for "RIFF JTAG – Samsung Galaxy GIO (S5660) Unbrick – Boot repair supported"
http://www.jtagbox.com/jtag-news/riff-jtag-samsung-galaxy-gio-s5660-unbrick-boot-repair-supported/
Complete info. is there i.e. Dealers, Downloads, Features, ..... , Support, Unbrick Your Phone Here...etc
Click "Dealers" tab for buying or click "Unbrick ur phone here" tab for list of the dealers where U can unbrick ur phone.
Don't worry bro!! Many users have benefited!! & So will be you!!
BEST OF LUCK!!:thumbup::thumbup:
Sent Via XDA Premium
I think I bricked my phone
I turned it off to boot into download mode but it doesn't boot anymore, not even in recovery, and it doesn't charge when I plug it in.
You could try to go into download mode with a jig. I bought one for about €3, which unfortunately didn't work because it was hardbricked.
but it was worth the shot.
Also you could try hooking it up to your computer and try to fix it with the program Odin. Try this before you buy a jig.
Search for both options on this forum or Google.
Sent from my GT-S5660 using xda premium
WastedWes said:
You could try to go into download mode with a jig. I bought one for about €3, which unfortunately didn't work because it was hardbricked.
but it was worth the shot.
Also you could try hooking it up to your computer and try to fix it with the program Odin. Try this before you buy a jig.
Search for both options on this forum or Google.
Sent from my GT-S5660 using xda premium
Click to expand...
Click to collapse
I tried Odin, it doesn't recognize, I bought my phone 5 days ago, I'll try to get it replaced or get my money back.
odin with reinstall
if your phone cant be charged,it means bootloader have lost.
you have two choices,go to service center or jtag
The Chinese are improving themselves!
czkwg8 said:
if your phone cant be charged,it means bootloader have lost.
you have two choices,go to service center or jtag
The Chinese are improving themselves!
Click to expand...
Click to collapse
I just got my phone replaced hehehe
RafayelG said:
I just got my phone replaced hehehe
Click to expand...
Click to collapse
lucky man you are
dead boot n bricked no problem with me...because i have RIFF box Jtag
my phone can't be on..
i already try many way such as remove the ext card, remove the battery for 30 minute..
but, it is still the same..
the phone is shown nothing..
can someone help me..
my phone was rooted..
for sure there is no warranty if im sent it to samsung centre..
Why you so confused?
Just go to SSC and said "I don't know why after I update this phone using Samsung Kies (of course I follow the steps) but my phone suddenly dead! *for more reason make it by your self*
Sent from my GT-I8150 using xda premium
tomCAD77 said:
my phone can't be on..
i already try many way such as remove the ext card, remove the battery for 30 minute..
but, it is still the same..
the phone is shown nothing..
can someone help me..
my phone was rooted..
for sure there is no warranty if im sent it to samsung centre..
Click to expand...
Click to collapse
You need usb jig for flash maybe you can search from youtube for unbrick
gwonder said:
You need usb jig for flash maybe you can search from youtube for unbrick
Click to expand...
Click to collapse
I think USB jig just for clear counter *I'm forget it*.
Best solution is RIFF Jtag :banghead:
Sent from my GT-I8150 using xda premium
hard brick?means cant enter into download or recovery mode?
using riff jtag.
because the boot loader dies,,
I received an SGH-T989 that wouldn't boot. It had TWRP on it, so I was able to flash latest stable CWM. Upon reboot, it apparently became hard-bricked.
Currently, I'm unable to enter download or recovery modes. USB Jig does not work. There is no output on the screen, even when charging the battery. When connected in Windows (32 or 64), I get a usb error message: "This device is disabled because the firmware of the device did not give it the required resources. (Code 29)"
My question: Is the motherboard dead, or could a jtag repair fix it?
What I've tried:
multiple micro usb cables
usb jig
odin
keis
heimdall
Thanks xda!
Dostoevsky said:
I received an SGH-T989 that wouldn't boot. It had TWRP on it, so I was able to flash latest stable CWM. Upon reboot, it apparently became hard-bricked.
Currently, I'm unable to enter download or recovery modes. USB Jig does not work. There is no output on the screen, even when charging the battery. When connected in Windows (32 or 64), I get a usb error message: "This device is disabled because the firmware of the device did not give it the required resources. (Code 29)"
My question: Is the motherboard dead, or could a jtag repair fix it?
What I've tried:
multiple micro usb cables
usb jig
odin
keis
heimdall
Thanks xda!
Click to expand...
Click to collapse
so the qhsusb_dload does not apear when your device is plugged into the computer? if so please hold on a little longer, somebody found a method of unhard bricking S3's and eventually Note 3's and the galaxy megas and im getting closer to being able to do this aswell im going to try to fix mine when i get home so hold on
Trozzul said:
so the qhsusb_dload does not apear when your device is plugged into the computer? if so please hold on a little longer, somebody found a method of unhard bricking S3's and eventually Note 3's and the galaxy megas and im getting closer to being able to do this aswell im going to try to fix mine when i get home so hold on
Click to expand...
Click to collapse
That would be great! I did see the S3 fix that loads a debrick.img from sdcard - would that work with hardbricked? Windows wouldn't load the usb drive for my phone, complaining that the firmware didn't give the "required resources". So if the firmware is borked, I'm not sure it would be able to load an external img.
I couldn't wait, though. Sent it out for jtag repair :fingers-crossed:
Dostoevsky said:
That would be great! I did see the S3 fix that loads a debrick.img from sdcard - would that work with hardbricked? Windows wouldn't load the usb drive for my phone, complaining that the firmware didn't give the "required resources". So if the firmware is borked, I'm not sure it would be able to load an external img.
I couldn't wait, though. Sent it out for jtag repair :fingers-crossed:
Click to expand...
Click to collapse
Hello I was wondering if the Jtag did its job?
sirsmokey said:
Hello I was wondering if the Jtag did its job?
Click to expand...
Click to collapse
Jtag should always do the job, unless there was physical damage done to the motherboard.
Dostoevsky said:
That would be great! I did see the S3 fix that loads a debrick.img from sdcard - would that work with hardbricked? Windows wouldn't load the usb drive for my phone, complaining that the firmware didn't give the "required resources". So if the firmware is borked, I'm not sure it would be able to load an external img.
I couldn't wait, though. Sent it out for jtag repair :fingers-crossed:
Click to expand...
Click to collapse
Trozzul said:
Jtag should always do the job, unless there was physical damage done to the motherboard.
Click to expand...
Click to collapse
Thanks for the quick reply , i guess the next question i should ask , is it really worth the 100 bux for the j tag service or to put the money towards a newer phone ?,hmmm rhetorical i guess
sirsmokey said:
Thanks for the quick reply , i guess the next question i should ask , is it really worth the 100 bux for the j tag service or to put the money towards a newer phone ?,hmmm rhetorical i guess
Click to expand...
Click to collapse
The t989 has great specs, only downside is its PPI (really low) if you still love it, I would wait if you want to send it into JTAG repairs, we are on the verge of unbricking our t989 without JTAG! Looks like we need someone with a working t989D though
I have been studying the other 'unbrick' methods, its definatly mind expanding, the amount of knowledge absorbed can seriously make you forget time n space.
If there is anything I can do / contribute holler at me.
Now ill tell you something weird so I flashed a rom not meant for T989D plus I did it all without being rooted. (if it matters) since Since the flash the phone doesn't boot into recovery or show a bootanimation, just darkness.Yet it felt operational in hand.
Once I plugged it back into the PC all I got was a constant notification of drivers that cannot be identified Also it keeps connecting and disconnecting the device.
None of this is weird until I installed OMAP flash and the T.I. drivers for which was used to fix my friends nexus. After he left I plugged my s2 to the PC still nothing. I looked away for a brief moment . Then i noticed MobileGo for Android popped on screen. Visually showing my s2 as an Alcatel rom.
just bizzare.....
The unbrick method on the S2 is a little different, but in General, at http://forum.xda-developers.com/showthread.php?t=2646310 after a little work, I resurrected a QHSUSB_DLOAD 9025 T989D to the point of ODIN and fully working Android OS working, just missing recovery.. Soon to follow in a day or so.
Lord Zog said:
The unbrick method on the S2 is a little different, but in General, at http://forum.xda-developers.com/showthread.php?t=2646310 after a little work, I resurrected a QHSUSB_DLOAD 9025 T989D to the point of ODIN and fully working Android OS working, just missing recovery.. Soon to follow in a day or so.
Click to expand...
Click to collapse
:goodude I could kiss you, thank you so much!!!! that is exactly where my phone was (QHSUSB_DLOAD):good:
Thanks to the devs behind the unbrick , all of your hard work is deeply appreciated, One Luv :laugh:
Now my 989 is working again, ive had it stuck for the past half year. Life saver you are sir
sirsmokey said:
:goodude I could kiss you, thank you so much!!!! that is exactly where my phone was (QHSUSB_DLOAD):good:
Thanks to the devs behind the unbrick , all of your hard work is deeply appreciated, One Luv :laugh:
Now my 989 is working again, ive had it stuck for the past half year. Life saver you are sir
Click to expand...
Click to collapse
glad to hear its working again! might i ask how you went about this?
sirsmokey said:
:goodude I could kiss you, thank you so much!!!! that is exactly where my phone was (QHSUSB_DLOAD):good:
Thanks to the devs behind the unbrick , all of your hard work is deeply appreciated, One Luv :laugh:
Now my 989 is working again, ive had it stuck for the past half year. Life saver you are sir
Click to expand...
Click to collapse
Lord Zog said:
The unbrick method on the S2 is a little different, but in General, at http://forum.xda-developers.com/showthread.php?t=2646310 after a little work, I resurrected a QHSUSB_DLOAD 9025 T989D to the point of ODIN and fully working Android OS working, just missing recovery.. Soon to follow in a day or so.
Click to expand...
Click to collapse
Hi, so I also have a hard bricked t989 galaxy s2 (tmobile variant) and I'm attempting to understand the instructions. However my phone has another issue...usb connection to the computer does not work, it hasn't worked since the micro usb port on the phone was replaced because the old one broke. So really the phone could charge but never connect to my pc as it cant be detected...so what are my options? If i create the sd card with the image, will i still need to connect it to a pc in order to force the phone into download mode? Please help...