Hello,
This morning I want to make my own custom rom with kitchen dsixda.
after the first boot has hung at boot animation.
in the horizontal format i could see a part of the home screen and I want to restart the phone.
it will not turn on anymore and if I plug in phone via usb to computer message comes QSUSB_DLOAD driver is not installed.
No download and no recovery mode possible.
I pull out battery about 20 minutes...nothing.
I'll send it to SCS. I have called and said there that phone will not turn on anymore.
There were no further questions on the hotline.
The question:
can thay see that I had custom rom on my phone.
Then my warranty is gone.
Or is there away to repair the phone itself with some tools??
Greetz
Asmir GT
Google JIG
_jis_ said:
Google JIG
Click to expand...
Click to collapse
i have already searched for it.
but i have no jtag riff box to repair a bootload partition.
the phone is dead.i mean only resistor jig can't fix it???
AsmirGT said:
i have already searched for it.
but i have no jtag riff box to repair a bootload partition.
the phone is dead.i mean only resistor jig can't fix it???
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=Rdn5GoRjhn0&feature=youtube_gdata_player
Sent from my GT-I8150 using Tapatalk 2
andynroid said:
http://www.youtube.com/watch?v=Rdn5GoRjhn0&feature=youtube_gdata_player
Sent from my GT-I8150 using Tapatalk 2
Click to expand...
Click to collapse
allready seen on youtube.
but i mean my phome ist fully briked.completly dead.
no charge,no download or recovery mode possible.
odin doesn't recognise my phone anymore
i have send my phone today to SCS.
Let see when my phone is back.
that's probably the solution bei e***y for 30 Euro+Shippcosts but i have already samsung warranty or not???
http://www.youtube.com/user/MobileTechVideos
Related
I tried to install a customized rom for the first time into my Samsung Gio, but something went terribly wrong. I had rooted my device, and I was using CWM, but I think I managed to screw up my recovery partition, and possibly the whole system, using it..
I can't get into downloading mode by the button combo (volume down + home + power). The screen stays blank whatever I do... However, I'm able to get Odin to detect my device when I press all buttons and then insert battery. But still, I can't enter the download mode, and I guess this is the reason why Odin fails when setting up the connection.
Is there some way to access my device using adb without having direct access to my device (which is why I can't set USB debugging mode)? Can I boot Android only from SD card?
I'm running out of ideas...
EDIT: I found out info about USB jigs. I'm trying to build one myself, because I only need 301kohm resistor and microusb connector. I'll let you know if it works.
remove the battery for 1 minute and try it again... this is my only idea
Don't be afraid to hit the thanks button. It doesn't bite. lol
Sorry for my bad englisch
systemdown said:
I tried to install a customized rom for the first time into my Samsung Gio, but something went terribly wrong. I had rooted my device, and I was using CWM, but I think I managed to screw up my recovery partition, and possibly the whole system, using it..
I can't get into downloading mode by the button combo (volume down + home + power). The screen stays blank whatever I do... However, I'm able to get Odin to detect my device when I press all buttons and then insert battery. But still, I can't enter the download mode, and I guess this is the reason why Odin fails when setting up the connection.
Is there some way to access my device using adb without having direct access to my device (which is why I can't set USB debugging mode)? Can I boot Android only from SD card?
I'm running out of ideas...
EDIT: I found out info about USB jigs. I'm trying to build one myself, because I only need 301kohm resistor and microusb connector. I'll let you know if it works.
Click to expand...
Click to collapse
If still it doesn't, then there's another way & that is:- Riff Jtag box. It'll definitely unbrick your GIO.
Hope this helps...
Sent Via XDA™ Premium
You can get a usb jig for less than 2 dollar or something if making your own doesnt work
Sent from my GT-S5660 using xda app-developers app
voetbalremco said:
You can get a usb jig for less than 2 dollar or something if making your own doesnt work
Sent from my GT-S5660 using xda app-developers app
Click to expand...
Click to collapse
Today I tried makying an own usb jig, but it doesn't seem to work... Now I'm getting a bit desperate here :S
On ebay are lots of them...
Sent from my GT-S5660 using xda app-developers app
Galaxy_Rohit said:
If still it doesn't, then there's another way & that is:- Riff Jtag box. It'll definitely unbrick your GIO.
Hope this helps...
Sent Via XDA™ Premium
Click to expand...
Click to collapse
What's Riff Jtag box, where can I get one and how much does it cost? Gio is not that expensive phone, so I don't want to spend too much money trying to repair it. I wonder how much it would cost if I sent this to Samsung..
systemdown said:
What's Riff Jtag box, where can I get one and how much does it cost? Gio is not that expensive phone, so I don't want to spend too much money trying to repair it. I wonder how much it would cost if I sent this to Samsung..
Click to expand...
Click to collapse
Well...I've not bricked my phone... So I don't know about cost.
But Here's the official Riff Jtag webpage for "RIFF JTAG – Samsung Galaxy GIO (S5660) Unbrick – Boot repair supported"
http://www.jtagbox.com/jtag-news/riff-jtag-samsung-galaxy-gio-s5660-unbrick-boot-repair-supported/
Complete info. is there i.e. Dealers, Downloads, Features, ..... , Support, Unbrick Your Phone Here...etc
Click "Dealers" tab for buying or click "Unbrick ur phone here" tab for list of the dealers where U can unbrick ur phone.
Don't worry bro!! Many users have benefited!! & So will be you!!
BEST OF LUCK!!:thumbup::thumbup:
Sent Via XDA Premium
hi, i was reading about bootloader that it has to be unlocked in order to flash custom roms
i did download ez unlock from play store and did unlocked the boot loader but it was not recognizing at status even after the operation (status unknown)
i have i747M rooted
now i powered off the phone wanting to save the rom(again) thru CWM but it wont boot for nothing even pluged charger is not recognized
i have saved once the image so i have it on my sd
what can i do to get my phone back to life?
thanks for your help
Well, if you would have read anything, ez unlock is for verizon only. So, unless your phone shows any sign of life, you need to jtag.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
i realized after read some more but never thought it will die after reboot
anywaw phone is totally dead no sign at all
were do i find some step by step to debrick
i found some info but not for i747m
i wanna do it right this time
thanks
JTAG is best left to the pros unless you are familar with it. I believe user AdamOutler does it as well as mobiletechvideos.com
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
my friends anybody can tell me i can flash the bootloader with odin ?
i have a copy of the bootloader i guess i did before installing CWM only thing is on the phone internal storage that i cant acces
is there a way of accesing the internal storage of my phone as bricked?
if i plug the phone thru usb it gives me the qhusb dload driver missing
can i use odin to flash the bootloader if i can retreive it from my internal storage?
or is there a file i can download for i747m?
or if the only way is jtag i can do it myself just cant find my way to info
thanks for any info
adika9 said:
my friends anybody can tell me i can flash the bootloader with odin ?
i have a copy of the bootloader i guess i did before installing CWM only thing is on the phone internal storage that i cant acces
is there a way of accesing the internal storage of my phone as bricked?
if i plug the phone thru usb it gives me the qhusb dload driver missing
can i use odin to flash the bootloader if i can retreive it from my internal storage?
or is there a file i can download for i747m?
or if the only way is jtag i can do it myself just cant find my way to info
thanks for any info
Click to expand...
Click to collapse
If you can't boot into download or restore, and if odin doesn't recognize, I can almost guarantee you that you have hard-bricked your s3. Your bootloader is messed up, and can only be restored through JTAG. For you to de-brick it yourself, you'll need to shell out a couple hundred dollars to buy the equipment, or you can send it to someone who offers the service for a smaller fee. If you need some suggestions, pm me.
i found driver for the phone so i guess it communicates with odin 1.85
i would like to try flashing a boot image for my phone I747MVLALH1 i think this is for virgin(bell)
anybody have one ?or know were i can download one?
i really have to try anything to get my phone back to life as i have some important data that i need asap
thanks
seriossly nobody have a solution for my problem other than buyng a riff box or sending it for repair?
im really interested to try things
thanks
adika9 said:
i found driver for the phone so i guess it communicates with odin 1.85
i would like to try flashing a boot image for my phone I747MVLALH1 i think this is for virgin(bell)
anybody have one ?or know were i can download one?
i really have to try anything to get my phone back to life as i have some important data that i need asap
thanks
Click to expand...
Click to collapse
So your phone shows up in odin?
adika9 said:
seriossly nobody have a solution for my problem other than buyng a riff box or sending it for repair?
im really interested to try things
thanks
Click to expand...
Click to collapse
Can you put your phone in download mode or in Clockwork mode? If yes you can download firmware HERE. Good luck
adika9 said:
seriossly nobody have a solution for my problem other than buyng a riff box or sending it for repair?
im really interested to try things
thanks
Click to expand...
Click to collapse
I don't see how you don't understand after all the replies... If your phone shows NO sign of life, (I.e. no download mode) You MUST either JTAG or wait for the SD/Hardware hack one of the Devs is working on.
That's it. End of story.
Sent from my SGH-I747 using xda app-developers app
im not sure if having the qualcomm driver installed will communicate with odin
only odin that recognizez the phone is version 1.85 and the port is with yellow but it wont go past msg "setup connection" when trying to flash
so i know that jtag is the sollution but im wondering if there is other solution than jtag
i found a post in the i9300 section that it could be unbricked with a procedure but im not sure its aplicable to i747m
anybody tryed to unbrick a hardbrick i747m other than jtag with riffbox ?
thanks
RPelham said:
I don't see how you don't understand after all the replies... If your phone shows NO sign of life, (I.e. no download mode) You MUST either JTAG or wait for the SD/Hardware hack one of the Devs is working on.
That's it. End of story.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
well i do understand a lot of things but if the replyes were :"u cannot solve it without JTAG or there is a fix in the works but not done yet" it would be better understood
the fact is i really wanted to try things that maybe other members dont even wanna touch
I'm assuming you have but doesn't get explicitly stated. But you have tried pulling batter. Putting back in then hold down the volume down key, home button and power but then after 2 seconds phone should vibrate so u let go of power button but continue holding the other 2.
Or the same method but holding power up.
To get you into either download or recovery mode.
Sent from my SGH-I747 using xda app-developers app
zerogood said:
I'm assuming you have but doesn't get explicitly stated. But you have tried pulling batter. Putting back in then hold down the volume down key, home button and power but then after 2 seconds phone should vibrate so u let go of power button but continue holding the other 2.
Or the same method but holding power up.
To get you into either download or recovery mode.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
thanks for this info but my phone got hardbricked because i unlocked the bootloader by mistake and it got corrupt i guess, and none of those actions work
try this http://forum.xda-developers.com/showthread.php?t=2549068
I think I bricked my phone
I turned it off to boot into download mode but it doesn't boot anymore, not even in recovery, and it doesn't charge when I plug it in.
You could try to go into download mode with a jig. I bought one for about €3, which unfortunately didn't work because it was hardbricked.
but it was worth the shot.
Also you could try hooking it up to your computer and try to fix it with the program Odin. Try this before you buy a jig.
Search for both options on this forum or Google.
Sent from my GT-S5660 using xda premium
WastedWes said:
You could try to go into download mode with a jig. I bought one for about €3, which unfortunately didn't work because it was hardbricked.
but it was worth the shot.
Also you could try hooking it up to your computer and try to fix it with the program Odin. Try this before you buy a jig.
Search for both options on this forum or Google.
Sent from my GT-S5660 using xda premium
Click to expand...
Click to collapse
I tried Odin, it doesn't recognize, I bought my phone 5 days ago, I'll try to get it replaced or get my money back.
odin with reinstall
if your phone cant be charged,it means bootloader have lost.
you have two choices,go to service center or jtag
The Chinese are improving themselves!
czkwg8 said:
if your phone cant be charged,it means bootloader have lost.
you have two choices,go to service center or jtag
The Chinese are improving themselves!
Click to expand...
Click to collapse
I just got my phone replaced hehehe
RafayelG said:
I just got my phone replaced hehehe
Click to expand...
Click to collapse
lucky man you are
dead boot n bricked no problem with me...because i have RIFF box Jtag
my phone can't be on..
i already try many way such as remove the ext card, remove the battery for 30 minute..
but, it is still the same..
the phone is shown nothing..
can someone help me..
my phone was rooted..
for sure there is no warranty if im sent it to samsung centre..
Why you so confused?
Just go to SSC and said "I don't know why after I update this phone using Samsung Kies (of course I follow the steps) but my phone suddenly dead! *for more reason make it by your self*
Sent from my GT-I8150 using xda premium
tomCAD77 said:
my phone can't be on..
i already try many way such as remove the ext card, remove the battery for 30 minute..
but, it is still the same..
the phone is shown nothing..
can someone help me..
my phone was rooted..
for sure there is no warranty if im sent it to samsung centre..
Click to expand...
Click to collapse
You need usb jig for flash maybe you can search from youtube for unbrick
gwonder said:
You need usb jig for flash maybe you can search from youtube for unbrick
Click to expand...
Click to collapse
I think USB jig just for clear counter *I'm forget it*.
Best solution is RIFF Jtag :banghead:
Sent from my GT-I8150 using xda premium
hard brick?means cant enter into download or recovery mode?
using riff jtag.
because the boot loader dies,,
hello I try to flash my T999 after reboot it does not want to turn on , no combination works , when I plug it to the PC it told me I was unknown device , i take to repair they saying that it will repair with gpgemmc but after he told me that its not going he told me that it my be the EMMC is dead or my micro usb connector is not good and it prevents the gpgemmc pass the flash boot
does the micro usb connector is necessery for the gpgemmc or the jtag i dont think !
boys501 said:
hello I try to flash my T999 after reboot it does not want to turn on , no combination works , when I plug it to the PC it told me I was unknown device , i take to repair they saying that it will repair with gpgemmc but after he told me that its not going he told me that it my be the EMMC is dead or my micro usb connector is not good and it prevents the gpgemmc pass the flash boot
does the micro usb connector is necessery for the gpgemmc or the jtag i dont think !
Click to expand...
Click to collapse
Nothing is dead or not good!
You just screwed the kernel and Only Samsung can fix it because i also had same problem.
Only Samsung or professionals can fix this.
f_u_006 said:
Nothing is dead or not good!
You just screwed the kernel and Only Samsung can fix it because i also had same problem.
Only Samsung or professionals can fix this.
Click to expand...
Click to collapse
i have read that is the sudden death and the motherboard must be remplaced!
Have you tried the unbrick thread?
Sent from my SGH-M919 using Tapatalk
serio22 said:
Have you tried the unbrick thread?
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
can you give me a link !
Its a sticky in android development
Sent from my SGH-M919 using Tapatalk