Alright, so I tried following a video tutorial on how to load a different Android OS onto my Kindle Fire HD 8.9 but those instructions didn't say that I would need to have the ROM on the kindle before I wiped the thing. Unfortunately, I do not remember for sure if I had enabled ADB on the kindle BEFORE I went through this process. I can get the kindle to the white and blue kindle logo, or I can get it onto the TWRP logo, but after that it just freezes there. I used to be able to get into the actual TWRP recovery screen but this no longer happens for me when I hold the volume-up button when it's on the white and blue KF logo. I'm not sure why this is. I have a factory cable (in fact, I ordered a second one because out of all the micro USB cables I have lying around I couldn't tell which was the one that originally came with my KF. So, I have the factory cable and my computer does not recognize the KF. I cannot get the drivers to install correctly, as it ALWAYS tells me that the drivers did not install correctly, even though the installer says they did. I can only sometimes get the KF to show up under the device manager, but never as the actual Kindle device. At this point I'm wondering if it's just perma-bricked since I've tried everything I could find that MIGHT help me on the XDA forums.
If anyone has any ideas or tips or even could get other information from me that might help diagnose the issue and/or fix it I would greatly appreciate it.
Thank you!
Outofmymindyo said:
Alright, so I tried following a video tutorial on how to load a different Android OS onto my Kindle Fire HD 8.9 but those instructions didn't say that I would need to have the ROM on the kindle before I wiped the thing. Unfortunately, I do not remember for sure if I had enabled ADB on the kindle BEFORE I went through this process. I can get the kindle to the white and blue kindle logo, or I can get it onto the TWRP logo, but after that it just freezes there. I used to be able to get into the actual TWRP recovery screen but this no longer happens for me when I hold the volume-up button when it's on the white and blue KF logo. I'm not sure why this is. I have a factory cable (in fact, I ordered a second one because out of all the micro USB cables I have lying around I couldn't tell which was the one that originally came with my KF. So, I have the factory cable and my computer does not recognize the KF. I cannot get the drivers to install correctly, as it ALWAYS tells me that the drivers did not install correctly, even though the installer says they did. I can only sometimes get the KF to show up under the device manager, but never as the actual Kindle device. At this point I'm wondering if it's just perma-bricked since I've tried everything I could find that MIGHT help me on the XDA forums.
If anyone has any ideas or tips or even could get other information from me that might help diagnose the issue and/or fix it I would greatly appreciate it.
Thank you!
Click to expand...
Click to collapse
fastboot cables don't work on the 8.9" models, also you are supposed to start holding volume up as soon as the orange logo turns on, not after you see the blue one. If it gets into twrp from that small advice you should know that the adb setting in your android os has no effect on whether it is turned on in recovery, its always on in recovery. Also idk what version of twrp you have but the old versions take forever to get into twrp, just thought i'd throw that out there. So if you can get it into recovery still, then you can use "adb push" to put the rom on the internal storage. I have a tutorial that tells how called something like "bootloop after installing twrp", something around those lines, i don't have many threads so it should be easy to find. If you can't get it into twrp then you can probably get into fastboot mode pretty easily. Just open the device manager, plug the device in, it should show up breifly as a jem device with a yellow triangle next to it. download my drivers and extract them somewhere, right click the jem device and hit update drivers and point it to where you extracted my drivers. Now you just need a utility like kindle fire first aid and a command prompt windows open and cd'd into kffa or something else's directory that came with a copy of fastboot and run a simple "fastboot -i 0x1949 getvar product" with the device off and unplugged. Once it says waiting for device, you can plug the device in and it should go into fastboot mode if the drivers are all functioning correctly. From there you can restore it with kindle fire first aid. Tell me how it goes!
23854399
stunts513 said:
fastboot cables don't work on the 8.9" models, also you are supposed to start holding volume up as soon as the orange logo turns on, not after you see the blue one. If it gets into twrp from that small advice you should know that the adb setting in your android os has no effect on whether it is turned on in recovery, its always on in recovery. Also idk what version of twrp you have but the old versions take forever to get into twrp, just thought i'd throw that out there. So if you can get it into recovery still, then you can use "adb push" to put the rom on the internal storage. I have a tutorial that tells how called something like "bootloop after installing twrp", something around those lines, i don't have many threads so it should be easy to find. If you can't get it into twrp then you can probably get into fastboot mode pretty easily. Just open the device manager, plug the device in, it should show up breifly as a jem device with a yellow triangle next to it. download my drivers and extract them somewhere, right click the jem device and hit update drivers and point it to where you extracted my drivers. Now you just need a utility like kindle fire first aid and a command prompt windows open and cd'd into kffa or something else's directory that came with a copy of fastboot and run a simple "fastboot -i 0x1949 getvar product" with the device off and unplugged. Once it says waiting for device, you can plug the device in and it should go into fastboot mode if the drivers are all functioning correctly. From there you can restore it with kindle fire first aid. Tell me how it goes!
Click to expand...
Click to collapse
Hi there, thanks so much for the info. I'm getting to work on this again at the moment and will post results. I am able to get it into the TWRP logo by holding the volume up button when the orange and white logo comes on the screen, but after letting it sit on that screen for an hour yesterday I still had no change on the tablet, so I'm not sure why it's no longer actually finishing loading the TWRP recovery setup. I'll go through your posts and see what I can find that may help, and I'll post back with results. Thanks again!
This is the result I get from plugging the kindle in after following some steps yesterday before I made my post. I've been at this trying to fix the Kindle for well over two months now so this is the first time I've seen it come up in the device manager this way. I DID create a new user account on my computer since I could never get it to register on the device manager at all, so perhaps that was part of the problem. I'm assuming that this means the ADB drivers are now installed and working properly.
The problem I'm having is that when I try to use Kindle Fire First Aid, it gets to the "daemon started successfully" part of restoring it to the 8.2.4 (I believe) and since it's still stuck on the TWRP logo I get no prompt as the command window says I should.
I can't figure out how to link directly to Picasa photos anymore, but basically in the device manager it shows "Kindle Fire" with "Android ADB Interface" underneath it.
Another edit, I managed to get it to say fastboot mode but I'm not sure what to do after that, will go do some more digging.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Yeah, I'm not sure what's going on, but I can flash the boot and recovery images, I can't boot the system.img file due to an error about not having enough space. I can't push anything to the /sdcard/ because it says device not found, even though it obviously is found since I can issue fastboot and adb commands without a problem. I try to get into the TWRP recovery again but it still just sits at the TWRP logo for over an hour and does nothing else.
ok lemme clarify one thing, adb commands do not work with fastboot, only fastboot commands work with fastboot. Wish they would rename the driver to fastboot so it would be less confusing. Now as for that write fail, i'm guessing the image it tried to flash is bad. I think if you delete the images in kffa's directory it downloaded then it will try again and you might have more luck, also you could try SRT.
Related
I have had a Kindle Fire since they day they came out. I immediately disliked the stock Rom so I ran the kindle fire utility and installed Fire Fire Fire and TWRP, rooted it, and installed CM7 Rom which has been working great. Transferred files and programs between my PC and Kindle with no issue for months. Now with all the ICS roms available and working I decided to try and upgrade to one of those and thats when everything went wrong. Its in a bootloop and the triangle appears, fades, lights up again and immediately boots to TWRP. I have flashed the entire kindle using TWRP trying to get everything off of it. Upon plugging it into my PC BRIEFLY when the triangle logo pops up I get a "USB device not recognized" on my PC. I have tried using KFUtility to reinstall drivers, tried uninstalling n reinstalling drivers but the same thing happens. I cannot use TWRP to mount at all, nothing happens. Kindle Fire UTility keeps saying adb offline, CMD adb devices also results in 0 devices found. I have tried putting it on normal boot using both ADB and KFUtility and it says "wait for device" and nothing ever happens. Any idea? Not even sure if I have a rom installed on my kindle anymore but my PC wontread it so I cannot push another image to it. Got a plane trip on Saturday and would love to have this working to kill the bordom lol. Any advise would be greatly appreciated.
It sounds like your bootmode is set to recovery. An easy way to fix this is download FFF1.4 to your computer and use the mount function in recovery to place it on your sdcard.
Flash it in recovery as you would a rom except don't wipe anything. When you reboot, hold the power button like you're trying to enter recovery and you'll be given the option to reset the bootmode.
Thank you so much for your advice but there in lies the problem. Inside the recovery console i choose to mount it and nothing happens. My PC will not let me access the kindle in anyway at all, either mounting the SD Card or via ADB/KFUtility.
anomiefaunus said:
Thank you so much for your advice but there in lies the problem. Inside the recovery console i choose to mount it and nothing happens. My PC will not let me access the kindle in anyway at all, either mounting the SD Card or via ADB/KFUtility.
Click to expand...
Click to collapse
Generally, the only thing that would prevent adb/kfu from communicating with the device is the drivers. Make sure they're installed properly. You may have to uninstall them (delete if applicable) and reinstall them.
Follow the instructions in this guide to install and verify your drivers.
http://forum.xda-developers.com/showpost.php?p=23747671&postcount=2
K heres the latest (we r making progress!)
I got my device to be detected by my PC and used KFutility to change it to normal boot. Now instead of booting into recovery everytime it boots normally.... to a black screen (guessing my rom is shot or I deleted it while playing with it). The issue is the ONLY time my PC recognizes my kindle is for a .5 second period when i first turn my KF on and the yellow triangle appears. I can use this window to change it to normal bootmode, reinstall TeamWin, stuff like that, but i cannot mount it so I can transfer or adb so I can push. You can watch device manager and it'll pop up ADB android phone or whatever it should but poof, a second later gone.
anomiefaunus said:
K heres the latest (we r making progress!)
I got my device to be detected by my PC and used KFutility to change it to normal boot. Now instead of booting into recovery everytime it boots normally.... to a black screen (guessing my rom is shot or I deleted it while playing with it). The issue is the ONLY time my PC recognizes my kindle is for a .5 second period when i first turn my KF on and the yellow triangle appears. I can use this window to change it to normal bootmode, reinstall TeamWin, stuff like that, but i cannot mount it so I can transfer or adb so I can push. You can watch device manager and it'll pop up ADB android phone or whatever it should but poof, a second later gone.
Click to expand...
Click to collapse
Get your device drivers working so you can use adb. Follow the instructions in the post below...
http://forum.xda-developers.com/showpost.php?p=26144447
That is excellent advice and I wish it would work but I cannot pull up ADB once in TeamWin. Keeps saying no devices. As i said my PC detects it and ADB will detect it for .5 seconds on the orange triangle. Once the orange triangle disappears and it either boots to blackness or boots to TeamWin ADB stops recognizing my device. But I will play around with your suggestions once I get off work and let you know what i find out. Thanks again for everyones support.
Frozen screen during rooting
Hi,
I am new to the forum. I have a kF screen stuck (where it says 'kindle fire') while I was trying to root it. I tried hard reset, charging for half hour, calling AMAZON...nothing works. The screen goes off if I hold it for 20 seconds but when I put it back on same thing. I was trying to root it with 'fastboot (?). Is there anything at all I can do? Thanks.
peredexter said:
Hi,
I am new to the forum. I have a kF screen stuck (where it says 'kindle fire') while I was trying to root it. I tried hard reset, charging for half hour, calling AMAZON...nothing works. The screen goes off if I hold it for 20 seconds but when I put it back on same thing. I was trying to root it with 'fastboot (?). Is there anything at all I can do? Thanks.
Click to expand...
Click to collapse
Don't hijack the threads please. If you have a problem or question, post it in the Q&A section.
Hello,
i got a kindle fire 2 here, but it is stucked on the Bootlogo. it was tried to install a custom rom by a friend of mine, so i cant tell, which method he tried or on what command it failed. a backup isn't available.
anyway, i got a fastboot cable here, which my friend didn't had.
when i plug it, it start into fastboot mode an show me a flashing green traffic light. the windows device manager shows me the "Kindle Fire -> Android Composite ADB Interface" (as seen in the attachment)
the "fastboot devices -i 0x1949" command shows me a "0E6... fastboot" line.
i tried to fix it with commands from this post: http://forum.xda-developers.com/showthread.php?t=2100963
ended up, that the blue kindle logo doesn't show up. instead its now stucked in a bootloop. the logo disappers any few seconds and it seems, the device is restarting every time.
now i have no idea anymore, how to go on. tried to use the kindlefireutility2, but after i run it, it closes immediately or just shows "Initializing..."
also the FirstAide64 will not work. when i select "Completly Restore KF2 - fastboot" it shows up an Error Message "The system can not find the specified path..."
adb commands are not usable during fastboot, right? because the adb devices list is empty every time.
hopefully someone can give me a hint, what else i can try.
regards
arthur
arthur. said:
Hello,
i got a kindle fire 2 here, but it is stucked on the Bootlogo. it was tried to install a custom rom by a friend of mine, so i cant tell, which method he tried or on what command it failed. a backup isn't available.
anyway, i got a fastboot cable here, which my friend didn't had.
when i plug it, it start into fastboot mode an show me a flashing green traffic light. the windows device manager shows me the "Kindle Fire -> Android Composite ADB Interface" (as seen in the attachment)
the "fastboot devices -i 0x1949" command shows me a "0E6... fastboot" line.
i tried to fix it with commands from this post: http://forum.xda-developers.com/showthread.php?t=2100963
ended up, that the blue kindle logo doesn't show up. instead its now stucked in a bootloop. the logo disappers any few seconds and it seems, the device is restarting every time.
now i have no idea anymore, how to go on. tried to use the kindlefireutility2, but after i run it, it closes immediately or just shows "Initializing..."
also the FirstAide64 will not work. when i select "Completly Restore KF2 - fastboot" it shows up an Error Message "The system can not find the specified path..."
adb commands are not usable during fastboot, right? because the adb devices list is empty every time.
hopefully someone can give me a hint, what else i can try.
regards
arthur
Click to expand...
Click to collapse
So you have followed Steps 3 and 4?
Just below that is a method to flash back to stock, have you tried that, as the stock files are there as well?
arthur. said:
Hello,
i got a kindle fire 2 here, but it is stucked on the Bootlogo. it was tried to install a custom rom by a friend of mine, so i cant tell, which method he tried or on what command it failed. a backup isn't available.
anyway, i got a fastboot cable here, which my friend didn't had.
when i plug it, it start into fastboot mode an show me a flashing green traffic light. the windows device manager shows me the "Kindle Fire -> Android Composite ADB Interface" (as seen in the attachment)
the "fastboot devices -i 0x1949" command shows me a "0E6... fastboot" line.
i tried to fix it with commands from this post: http://forum.xda-developers.com/showthread.php?t=2100963
ended up, that the blue kindle logo doesn't show up. instead its now stucked in a bootloop. the logo disappers any few seconds and it seems, the device is restarting every time.
now i have no idea anymore, how to go on. tried to use the kindlefireutility2, but after i run it, it closes immediately or just shows "Initializing..."
also the FirstAide64 will not work. when i select "Completly Restore KF2 - fastboot" it shows up an Error Message "The system can not find the specified path..."
adb commands are not usable during fastboot, right? because the adb devices list is empty every time.
hopefully someone can give me a hint, what else i can try.
regards
arthur
Click to expand...
Click to collapse
I was having the same problem, i just booted and suddenly turned off. It was on the stock rom , so I used a factory cable and installed fff 1.4 then installed the twrp 2.5 from their site but I'm not able to get it into recovery, just an amber light and it turns off!! I'm wondering if is not compatible, I tried the otter and blaze twrp just to make sure...
What do you think? Did you managed to fix it?
Sent from my SPH-D710 using xda premium
chronicfathead said:
So you have followed Steps 3 and 4?
Just below that is a method to flash back to stock, have you tried that, as the stock files are there as well?
Click to expand...
Click to collapse
i wanted to get the restoration tool from here, but the file is not availible anymore. anyway, the device didn't received the adb commands.
i tried to flash the original stock rom back, just by using files from amazon. i don't know what happend, but after "fastboot bootloader" command the Kindle is dead. No more LED light while charging, no reaction on fastboot cable
first i thought, the battery is empty, but after one night on the charger, nothing changed. the device stays complete black.
Any chances left (even at amazon?) or is the garbage the only place this kindle belongs now?
Well Arthur, if you have not opened it should not be dead, it seems like you are on a boot loop and maybe the battery is fully discharged.
Please explain how did you tried to install the Amazon stock ROM
Sent from my SPH-D710 using xda premium
well, my first thoughts were also, that the battery is discharged. but i used next to my computer already an ipad charger and my phone-charger (both over 1A out) over night. but still no lightning of the LED.
last thing i remember, was a (afterwards clearly) stupid hint from a ebay page. [fastboot -i 0x1949 flash bootloader u-boot.bin] i used the u-boot.bin from the amazon homepage.
afterwards the kindle shut down and the lightning LED has never been seen again
Your KF will not charge if bricked, you could try a factory cable to get it into fastboot mode but if it is discharged maybe you must try another method to charge the battery... First try the factory cable!!
Sent from my SPH-D710 using xda premium
i tried with a factory cable, but again, no response from the device. As I mentioned, I tried already several charger.
And what do you mean by another charging method? Is there something i don't know yet ?
Hi, i accidentally deleted everything, including my OS while trying to restore my kindle to its original state. Your help would be appreciated!
-its stuck in the KF logo (white and orange, meaning original bootloader)
-I cannot access TWRP
-when i try to use KFU, it says ADB status: online ; boot status : unknown
-when i try to install TWRP via KFU, it gets stuck in " waiting for device" ( i guess i cant go into fastboot mode)
-i'm not accessible to a factory cable because im not from the us
Help me please
Thank you!
I did something very similar.
june726 said:
Hi, i accidentally deleted everything, including my OS while trying to restore my kindle to its original state. Your help would be appreciated!
-its stuck in the KF logo (white and orange, meaning original bootloader)
-I cannot access TWRP
-when i try to use KFU, it says ADB status: online ; boot status : unknown
-when i try to install TWRP via KFU, it gets stuck in " waiting for device" ( i guess i cant go into fastboot mode)
-i'm not accessible to a factory cable because im not from the us
Help me please
Thank you!
Click to expand...
Click to collapse
I am having a similar issue like yours. Yesterday I tried downloading Jellybean onto my Kindle. I did all of the precautions, TWRP, KFU, etc.
And right as I thought I was done, boom, I get stuck in an infinite re boot. Every time it finally boots up it says android.process.phone for not even a full second and immediately reboots. I am not the smartest, but if someone could walk us through a way to restore our kindles or fix the problem. I would be most gracious! I am not sure what the ADB is as well. Is that what I am missing?
june726 said:
Hi, i accidentally deleted everything, including my OS while trying to restore my kindle to its original state. Your help would be appreciated!
-its stuck in the KF logo (white and orange, meaning original bootloader)
-I cannot access TWRP
-when i try to use KFU, it says ADB status: online ; boot status : unknown
-when i try to install TWRP via KFU, it gets stuck in " waiting for device" ( i guess i cant go into fastboot mode)
-i'm not accessible to a factory cable because im not from the us
Help me please
Thank you!
Click to expand...
Click to collapse
Have you guys checked this out???
http://forum.xda-developers.com/showthread.php?t=1428428
lj50036 said:
Have you guys checked this out???
http://forum.xda-developers.com/showthread.php?t=1428428
Click to expand...
Click to collapse
Yes, i've tried downloading that. But i can't seem to run it correctly. When i open it, it just opens a command promt and then closes immediately.
SDK
june726 said:
Yes, i've tried downloading that. But i can't seem to run it correctly. When i open it, it just opens a command promt and then closes immediately.
Click to expand...
Click to collapse
OK well go get this for your PC make sure you get the one for your os....make sure you get the zip not the exe.... It will be like a 400 to 500 meg dowload....
http://developer.android.com/sdk/index.html
Controverly areadvia
lj50036 said:
OK well go get this for your PC make sure you get the one for your os....make sure you get the zip not the exe.... It will be like a 400 to 500 meg
I downloaded the sdk and i can now use adb. But, my problem now is that i cannot copy the fbmode to my kindle via adb. When i push it to a location, it says that my kindle is read only. So without the fbmode, i cannot boot into fastboot, cannot install fff and twrp and no os again. what should i do now?
Click to expand...
Click to collapse
june726 said:
I downloaded the sdk and i can now use adb. But, my problem now is that i cannot copy the fbmode to my kindle via adb. When i push it to a location, it says that my kindle is read only. So without the fbmode, i cannot boot into fastboot, cannot install fff and twrp and no os again. what should i do now?
Click to expand...
Click to collapse
Ok.. Well than lets see here.....When can you use adb??? I need as much info as possible... What file are you moving..... Where are you trying to move it to... Copy and paste your commands and outputs this will make it much easier for me and anyone else that would like to help....Thx lj
Phil700 said:
I am having a similar issue like yours. Yesterday I tried downloading Jellybean onto my Kindle. I did all of the precautions, TWRP, KFU, etc.
And right as I thought I was done, boom, I get stuck in an infinite re boot. Every time it finally boots up it says android.process.phone for not even a full second and immediately reboots. I am not the smartest, but if someone could walk us through a way to restore our kindles or fix the problem. I would be most gracious! I am not sure what the ADB is as well. Is that what I am missing?
Click to expand...
Click to collapse
Well your problem is nowhere near the same as June's, but I'll go ahead and try to help your anyway. I've had this happen to me once or twice. My suggestion is to redownload your rom and gapps, and then try flagging them again. Hopefully that should work. There is an option in TWRP to mount your kindle on your computer.
Sent from my Nexus 7 using Tapatalk
So far.
Guys, sorry I might not have explained the issue in enough detail. Although the information is full of things that are helpful. It didn't quite help me.
Sorry about having to deal with a compete noob here...
---I'll list my issues to isolate confusion.---
-I cannot boot ADB, I click on it, a cmd window pops up and then immediately closes each time I proceed to open it. for a start, if someone could perhaps tell me what I am doing wrong, because I know I must not be doing what all of you pros are doing.
-Although I had TWRP installed on both my pc and kindle. Whenever I boot up my kindle, I do not get the blue and gray "Kindle Fire" logo before the Orange and White logo. So that for me was very frustrating.
-The Kindle Fire Utility is not detecting my device at all. Which is worrying me to death, the Kindle Fire Unbrick utlity is not working either which is killing me inside.
-For a detailed description of what my kindle fire does when I press the power button goes as so: I press the power button, the orange and white Kindle Fire logo pops up for a few seconds like normal, then it proceeds to boot or "Attenpt" to boot the Jellybean OS, after waiting 5 minutes, the OS lock screen pops up with "android.phone.com" or "phone.android.com" pops up, for a second, then it proceeds to fully rebooting the OS for another 5 minutes. It does it indefinitely.
So does this mean my kindle is officially done for? Bricked? Or is there still hope for me. This is really depressing, I spent most of my money on this, money is tight for me right now ant I use my kindle for school and research. It is a vital tool to me. I need all the help I can get.
Thanks for all of the help so far. You guys really know what you are doing, thanks!
System deleted Need Help !!!! Please
Recently I tried to install android in my Kindle Fire HDX 7 and I install a thing called FireFireFire I think to my kindle then It messed up everything, so I don't know what to do and I wiped all my data and even the Option called SYSTEM. after that I reboot my Kindle and all I have is KINDLE FIRE on the screen that's it. I can't use my Kindle at all ,and the computer won't let me install the driver all it told me is MTP USB device.and I tired to use all kind of tool to fix my kindle and CMD told me Can't Find Device. I m really not good at android so I really need someone help me !!!
Happyy said:
Recently I tried to install android in my Kindle Fire HDX 7 and I install a thing called FireFireFire I think to my kindle then It messed up everything, so I don't know what to do and I wiped all my data and even the Option called SYSTEM. after that I reboot my Kindle and all I have is KINDLE FIRE on the screen that's it. I can't use my Kindle at all ,and the computer won't let me install the driver all it told me is MTP USB device.and I tired to use all kind of tool to fix my kindle and CMD told me Can't Find Device. I m really not good at android so I really need someone help me !!!
Click to expand...
Click to collapse
Nothing here works for the HDX result=permabrick. All support for HDX is here http://forum.xda-developers.com/kindle-fire-hdx .
Phil700 said:
Guys, sorry I might not have explained the issue in enough detail. Although the information is full of things that are helpful. It didn't quite help me.
Sorry about having to deal with a compete noob here...
---I'll list my issues to isolate confusion.---
-I cannot boot ADB, I click on it, a cmd window pops up and then immediately closes each time I proceed to open it. for a start, if someone could perhaps tell me what I am doing wrong, because I know I must not be doing what all of you pros are doing.
-Although I had TWRP installed on both my pc and kindle. Whenever I boot up my kindle, I do not get the blue and gray "Kindle Fire" logo before the Orange and White logo. So that for me was very frustrating.
-The Kindle Fire Utility is not detecting my device at all. Which is worrying me to death, the Kindle Fire Unbrick utlity is not working either which is killing me inside.
-For a detailed description of what my kindle fire does when I press the power button goes as so: I press the power button, the orange and white Kindle Fire logo pops up for a few seconds like normal, then it proceeds to boot or "Attenpt" to boot the Jellybean OS, after waiting 5 minutes, the OS lock screen pops up with "android.phone.com" or "phone.android.com" pops up, for a second, then it proceeds to fully rebooting the OS for another 5 minutes. It does it indefinitely.
So does this mean my kindle is officially done for? Bricked? Or is there still hope for me. This is really depressing, I spent most of my money on this, money is tight for me right now ant I use my kindle for school and research. It is a vital tool to me. I need all the help I can get.
Thanks for all of the help so far. You guys really know what you are doing, thanks!
Click to expand...
Click to collapse
Hey Phil. Doesn't look like you've posted anything else, so you probably won't see this. But oh well... Sorry your problem got left in the dust. I didn't mean for that to happen. You need to shift + right click in the folder with adb.exe and click "open command window here" and then you can do your things. As far as everything else: does your computer do anything when you plug your kindle into it?
I accidentally did this once (at least I think it's the same) and what I did was I went into ADB and side loaded a custom ROM I used CM
Background: Kindle Fire 1st generation. Stuck on "kindle fire" logo screen. This is a stock KF -- never any previous attempts to root it.
KFU is unable to connect to the device -- or get it into fastboot. I purchased a factory cable, and that also was not successful. (BTW, I have a different KF 1st gen that works fine, and KFU recognizes it and can fastboot perfectly fine with that one).
I also attempted using the Firekit utility on a Debian Linux system. The tool seems to have the same issue -- gives me a "error: device not found" message when trying to set bootmode.
The "Post #1" HOW-TO by kinfauns talks about the bad bootloader scenario, and it mentions opening the case to short a circuit in order to enable USB boot. Can someone please point me to a link regarding this shorting technique? I think that is my next step.
Thanks,
lob455
lob455 said:
Background: Kindle Fire 1st generation. Stuck on "kindle fire" logo screen. This is a stock KF -- never any previous attempts to root it.
KFU is unable to connect to the device -- or get it into fastboot. I purchased a factory cable, and that also was not successful. (BTW, I have a different KF 1st gen that works fine, and KFU recognizes it and can fastboot perfectly fine with that one).
I also attempted using the Firekit utility on a Debian Linux system. The tool seems to have the same issue -- gives me a "error: device not found" message when trying to set bootmode.
The "Post #1" HOW-TO by kinfauns talks about the bad bootloader scenario, and it mentions opening the case to short a circuit in order to enable USB boot. Can someone please point me to a link regarding this shorting technique? I think that is my next step.
Thanks,
lob455
Click to expand...
Click to collapse
Does it show up in Device manager? as kindle, android phone, or something else...?
sd_shadow said:
Does it show up in Device manager? as kindle, android phone, or something else...?
Click to expand...
Click to collapse
No. When connected to the Windows7 machine, the bootloop-stuck KF is not recognized at all (regardless of whether using the standard USB cable or the factory cable).
On the working KF which was purchased from Amazon at the same time, Device Manager shows this working KF as "Android phone".
lob455 said:
No. When connected to the Windows7 machine, the bootloop-stuck KF is not recognized at all (regardless of whether using the standard USB cable or the factory cable).
On the working KF which was purchased from Amazon at the same time, Device Manager shows this working KF as "Android phone".
Click to expand...
Click to collapse
Fairly certain your battery is dead http://forum.xda-developers.com/showthread.php?t=1623244 . If so you can shock it`s inards and hook up fastboot cable all day long and it wont make a bit of difference till you get a new battery.
Thepooch said:
Fairly certain your battery is dead http://forum.xda-developers.com/showthread.php?t=1623244 . If so you can shock it`s inards and hook up fastboot cable all day long and it wont make a bit of difference till you get a new battery.
Click to expand...
Click to collapse
Thanks to Thepooch. Progress has been made. I was admittedly very skeptical about the dead battery theory. This Kindle Fire had been connected to a charger for literally days if not weeks. But I grabbed my wife's 2A charger and connected it.
Okay. Here is where the weird part starts.....
After several hours on the 2A charger, I hit the power button and got a TWRP Recovery screen! I was astounded. When using KFU, I have always gotten "ADB Status: Offline" and "Boot Status: Unknown" with this unit. I still do. But I have certainly tried the KFU selections of "Install Latest TWRP Recovery" and "Install Latest FireFireFire". Even though the utility returns messages that imply it was not successful (typically "< waiting for device >"), the only thing I can figure is that it was successful at least once. Even today when I run KFU, it still behaves as though it does not recognize the unit. Also, Device Manager still does not see the Kindle Fire.
So, now I have a Kindle Fire that seems to have good TWRP Recovery and FFF (I get the white & blue Kindle Fire logo now when booting). And this is a good thing, and a major step past the infinine white and orange Kindle Fire logo boot screen.
However, since I can't apparently connect to the unit via USB, I can't put a ROM on it to install. This is where I am stuck now.
Please let me know if you have any recommendations.
Thanks again.
lob455 said:
Thanks to Thepooch. Progress has been made. I was admittedly very skeptical about the dead battery theory. This Kindle Fire had been connected to a charger for literally days if not weeks. But I grabbed my wife's 2A charger and connected it.
Okay. Here is where the weird part starts.....
After several hours on the 2A charger, I hit the power button and got a TWRP Recovery screen! I was astounded. When using KFU, I have always gotten "ADB Status: Offline" and "Boot Status: Unknown" with this unit. I still do. But I have certainly tried the KFU selections of "Install Latest TWRP Recovery" and "Install Latest FireFireFire". Even though the utility returns messages that imply it was not successful (typically "< waiting for device >"), the only thing I can figure is that it was successful at least once. Even today when I run KFU, it still behaves as though it does not recognize the unit. Also, Device Manager still does not see the Kindle Fire.
So, now I have a Kindle Fire that seems to have good TWRP Recovery and FFF (I get the white & blue Kindle Fire logo now when booting). And this is a good thing, and a major step past the infinine white and orange Kindle Fire logo boot screen.
However, since I can't apparently connect to the unit via USB, I can't put a ROM on it to install. This is where I am stuck now.
Please let me know if you have any recommendations.
Thanks again.
Click to expand...
Click to collapse
First you must fix your driver. Unless it shows up in device manager as android composite adb interface. I still have question of it's proper installation since mounting sdcard is connected to a proper install.
Code:
adb push rom.zip/sdcard/
shift plus right click on kfu's tool folder select open command window here. Type
Code:
adb devices
you should get a number string code 1234××××××××× device if it says offline then driver is not proper. If it says 1234×××××××××× device then your good.
Type adb push <---leave one space here drag and drop the file you wish to push into terminal , then one more space , /sdcard/ it takes some time depending on file size. When it's done it will show records in and records out along with the time that the push took. If successful make a backup and then wipe cache, dalvik, and system. Flash rom.zip/gapps.zip reboot system. There is a catch 22 is the recovery packaged with KFU new enough to flash newer ROMs with full s-Linux support follow the steps in my guide highlighted in my signature to at least flash rooted stock before proceeding. @sd_shadow 's Rom would be perfect for first flash.
Edit: Side note modifications need to be made to driver to keep adb working on custom ROMs as some have been added prior this helps but the device ID changes with each new build ics, kit kat and so forth.
Thepooch said:
First you must fix your driver. Unless it shows up in device manager as android composite adb interface. I still have question of it's proper installation since mounting sdcard is connected to a proper install.
Code:
adb push rom.zip/sdcard/
shift plus right click on kfu's tool folder select open command window here. Type
Code:
adb devices
you should get a number string code 1234××××××××× device if it says offline then driver is not proper. If it says 1234×××××××××× device then your good.
Type adb push <---leave one space here drag and drop the file you wish to push into terminal , then one more space , /sdcard/ it takes some time depending on file size. When it's done it will show records in and records out along with the time that the push took. If successful make a backup and then wipe cache, dalvik, and system. Flash rom.zip/gapps.zip reboot system. There is a catch 22 is the recovery packaged with KFU new enough to flash newer ROMs with full s-Linux support follow the steps in my guide highlighted in my signature to at least flash rooted stock before proceeding. @sd_shadow 's Rom would be perfect for first flash.
Edit: Side note modifications need to be made to driver to keep adb working on custom ROMs as some have been added prior this helps but the device ID changes with each new build ics, kit kat and so forth.
Click to expand...
Click to collapse
Thanks @Thepooch for the detailed reply.
I spent several hours playing with this Kindle Fire, a different Kindle Fire (stock unit that works), regular USB and factory cables, kfu, and adb. Here are my observations that may or may not be significant:
1) With the working stock Kindle Fire: this shows up in Device Manager as Android Phone > Android Composite ADB Interface. In KFU, this working Kindle Fire shows ADB Status: Online and Boot Status: Unknown. If I run the "adb devices" comand, it happily gives me a 17BExxxxxxxxxxxx response.
2) With the non-working Kindle Fire that I am working with: This does not show up in Device Manager UNLESS I am in the FFF (white & blue logo screen) with the 3 boot choices listed at the bottom of the screen (Normal Boot, Recovery, Reset Boot Mode). If those 3 choices are shown, then Device Manager recognizes this as Android Phone > Android ADB Interface (it does not say "Composite" -- no matter how hard I try to delete that Android ADB Interface driver). This non-working Kindle Fire then disappears from Device Manager completely if in any TWRP screen or any FFF screen other than the one with the 3 boot choices at the bottom. When I run the "adb devices" command, I get a message "List of devices attached" with nothing below (no numbers or anything).
I suspect that you are correct -- that I am fighting a driver issue -- but I don't know how to get the Windows 7 computer to recognize the non-working Kindle Fire as a Android Composite ADB Interface. It happily recognizes the working Kindle Fire as Composite, so I know the driver is on the PC.
Any ideas of how to go forward are appreciated. I think that I have tried everything that I know to try on that Windows 7 PC, so at this point, my next plan is to play with this Kindle Fire using the FireKit tools and a Debian Linux PC. Maybe that will help -- or at least I will learn something.
lob455 said:
Thanks @Thepooch for the detailed reply.
I spent several hours playing with this Kindle Fire, a different Kindle Fire (stock unit that works), regular USB and factory cables, kfu, and adb. Here are my observations that may or may not be significant:
1) With the working stock Kindle Fire: this shows up in Device Manager as Android Phone > Android Composite ADB Interface. In KFU, this working Kindle Fire shows ADB Status: Online and Boot Status: Unknown. If I run the "adb devices" comand, it happily gives me a 17BExxxxxxxxxxxx response.
2) With the non-working Kindle Fire that I am working with: This does not show up in Device Manager UNLESS I am in the FFF (white & blue logo screen) with the 3 boot choices listed at the bottom of the screen (Normal Boot, Recovery, Reset Boot Mode). If those 3 choices are shown, then Device Manager recognizes this as Android Phone > Android ADB Interface (it does not say "Composite" -- no matter how hard I try to delete that Android ADB Interface driver). This non-working Kindle Fire then disappears from Device Manager completely if in any TWRP screen or any FFF screen other than the one with the 3 boot choices at the bottom. When I run the "adb devices" command, I get a message "List of devices attached" with nothing below (no numbers or anything).
I suspect that you are correct -- that I am fighting a driver issue -- but I don't know how to get the Windows 7 computer to recognize the non-working Kindle Fire as a Android Composite ADB Interface. It happily recognizes the working Kindle Fire as Composite, so I know the driver is on the PC.
Any ideas of how to go forward are appreciated. I think that I have tried everything that I know to try on that Windows 7 PC, so at this point, my next plan is to play with this Kindle Fire using the FireKit tools and a Debian Linux PC. Maybe that will help -- or at least I will learn something.
Click to expand...
Click to collapse
Android adb interface alone is a detection of fastboot composite is normal boot. This could be due to a partially broken shell try while the device is in recovery not at the bootloader your bootmode is iffy.
What is current Twrp versiom? 2.7.1.0?
If the problem is Kindle software, a could try a couple of things
adb commands should not work in bootloader mode
fastboot commands should work in bootloader mode
try
fastboot devices
if that works could try flashing twrp, I would Flash a different version so you know it worked, like 2.6.x.x http://techerrata.com/browse/twrp2/blaze
sd_shadow said:
What is current Twrp versiom? 2.7.1.0?
If the problem is Kindle software, a could try a couple of things
adb commands should not work in bootloader mode
fastboot commands should work in bootloader mode
try
fastboot devices
if that works could try flashing twrp, I would Flash a different version so you know it worked, like 2.6.x.x ..................
Click to expand...
Click to collapse
Thanks @sd_shadow for the reply.
In recovery mode, TWRP reports that it is version 2.6.3.1
I did try the "fastboot devices" command. When I am in the initial FFF screen (blue & white kindle fire logo with "Press power button for boot menu") or I am in the FFF menu with the 3 boot choices at the bottom (Normal Boot, Recovery, Reset Boot Mode), the "fastboot devices" command returns "0123456789ABCDEF fastboot". I didn't make up that number. It reports the hexadecimal digits in order from 0 through F, followed by the word "fastboot". It is pretty apparent that this is not a valid device ID number, but it is reporting something. I just don't know what it means.
If I am in any screen other than those, the "fastboot devices" command returns nothing, and it goes back at the command prompt.
lob455 said:
Thanks @sd_shadow for the reply.
In recovery mode, TWRP reports that it is version 2.6.3.1
I did try the "fastboot devices" command. When I am in the initial FFF screen (blue & white kindle fire logo with "Press power button for boot menu") or I am in the FFF menu with the 3 boot choices at the bottom (Normal Boot, Recovery, Reset Boot Mode), the "fastboot devices" command returns "0123456789ABCDEF fastboot". I didn't make up that number. It reports the hexadecimal digits in order from 0 through F, followed by the word "fastboot". It is pretty apparent that this is not a valid device ID number, but it is reporting something. I just don't know what it means.
If I am in any screen other than those, the "fastboot devices" command returns nothing, and it goes back at the command prompt.
Click to expand...
Click to collapse
I press the power button, to show boot menu (Normal Boot, Recovery, Reset Boot Mode) so it will pause the boot process for 2 mins or so.
the "0123456789ABCDEF fastboot" could be good, I believe that is what i usually get, and would go ahead and flash twrp.
fastboot flash recovery openrecovery-twrp-2.6.3.1-otter.img (or whatever version you are trying)
or try the reboot command
fastboot reboot
When in recovery if there is no adb my first thought is driver. Two other things are possible missing or broken shell or broken recovery. I myself lean to the side of it being a driver issue. Attach your working Kindle to pc while in recovery. Type adb devices it should say 12345678 blah blah recovery. If it does not then it's your driver.
sd_shadow said:
I press the power button, to show boot menu (Normal Boot, Recovery, Reset Boot Mode) so it will pause the boot process for 2 mins or so.
the "0123456789ABCDEF fastboot" could be good, I believe that is what i usually get, and would go ahead and flash twrp.
fastboot flash recovery openrecovery-twrp-2.6.3.1-otter.img (or whatever version you are trying)
or try the reboot command
fastboot reboot
Click to expand...
Click to collapse
@sd_shadow -- the "fastboot flash recovery openrecovery-twrp-...." command worked, and TWRP now reports that it is running version 2.7.1.0 (it was 2.6.3.1). It was immensely satisfying to find a command that this Kindle seems to like. Seriously. Thank you.
My next stupid question is, can I use another fastboot command to program the ROM, or can I use some fastboot command to load the ROM on sdcard via USB and then install it with TWRP? If I can do either of those things, then I think this problem is licked.
lob455 said:
@sd_shadow -- the "fastboot flash recovery openrecovery-twrp-...." command worked, and TWRP now reports that it is running version 2.7.1.0 (it was 2.6.3.1). It was immensely satisfying to find a command that this Kindle seems to like. Seriously. Thank you.
My next stupid question is, can I use another fastboot command to program the ROM, or can I use some fastboot command to load the ROM on sdcard via USB and then install it with TWRP? If I can do either of those things, then I think this problem is licked.
Click to expand...
Click to collapse
Just place a Rom on your Sdcard and flash it.
lob455 said:
@sd_shadow -- the "fastboot flash recovery openrecovery-twrp-...." command worked, and TWRP now reports that it is running version 2.7.1.0 (it was 2.6.3.1). It was immensely satisfying to find a command that this Kindle seems to like. Seriously. Thank you.
My next stupid question is, can I use another fastboot command to program the ROM, or can I use some fastboot command to load the ROM on sdcard via USB and then install it with TWRP? If I can do either of those things, then I think this problem is licked.
Click to expand...
Click to collapse
Try the mount option in twrp again
sd_shadow said:
Try the mount option in twrp again
Click to expand...
Click to collapse
@sd_shadow @Thepooch
Thanks both of you for your help. But not all stories have a happy ending.
Over the past couple of days, I have been fighting a battle with the battery. The battery charge level indicated in the main TWRP menu would decrease even when connected to the 2A charger. I found that I could temporarily add a few percent charge by disconnecting the USB cable, reconnecting to the 2A charger. However, that trick would only last for a few minutes and a few percent charge, and then the power button light would go out and discharge would start again.
I think that the battery is now pretty dead. Power button light stays off event with the charger connected. If I disconnect the USB cable and reconnect, then I can *occasionally* get the power light to go green then orange, and it will fire up into a FFF blue&white logo screen, but then it shuts off again.
At this point, I think I have to decide if I want to spend the $ for a replacement battery and then try to fight the rooting battle again. I was never able to get the PC to recognize the device in normal mode so no adb -- only fastboot would work.
lob455 said:
@sd_shadow @Thepooch
Thanks both of you for your help. But not all stories have a happy ending.
Over the past couple of days, I have been fighting a battle with the battery. The battery charge level indicated in the main TWRP menu would decrease even when connected to the 2A charger. I found that I could temporarily add a few percent charge by disconnecting the USB cable, reconnecting to the 2A charger. However, that trick would only last for a few minutes and a few percent charge, and then the power button light would go out and discharge would start again.
I think that the battery is now pretty dead. Power button light stays off event with the charger connected. If I disconnect the USB cable and reconnect, then I can *occasionally* get the power light to go green then orange, and it will fire up into a FFF blue&white logo screen, but then it shuts off again.
At this point, I think I have to decide if I want to spend the $ for a replacement battery and then try to fight the rooting battle again. I was never able to get the PC to recognize the device in normal mode so no adb -- only fastboot would work.
Click to expand...
Click to collapse
The battery will always charge in recovery. When it goes flat you end in a 5 second boot loop. Try 2 things since your bootloader is equipped to hand such things as a failsafe attach to pc via USB right when it powers on long press power button till it powers off and let sit for 24 hours. The low level charge might even kick in and indicate charging on the screen if so let it sit and it will eventually boot properly on its own. Good luck
lob455 said:
@sd_shadow @Thepooch
Thanks both of you for your help. But not all stories have a happy ending.
Over the past couple of days, I have been fighting a battle with the battery. The battery charge level indicated in the main TWRP menu would decrease even when connected to the 2A charger. I found that I could temporarily add a few percent charge by disconnecting the USB cable, reconnecting to the 2A charger. However, that trick would only last for a few minutes and a few percent charge, and then the power button light would go out and discharge would start again.
I think that the battery is now pretty dead. Power button light stays off event with the charger connected. If I disconnect the USB cable and reconnect, then I can *occasionally* get the power light to go green then orange, and it will fire up into a FFF blue&white logo screen, but then it shuts off again.
At this point, I think I have to decide if I want to spend the $ for a replacement battery and then try to fight the rooting battle again. I was never able to get the PC to recognize the device in normal mode so no adb -- only fastboot would work.
Click to expand...
Click to collapse
I suspect it's the usb port that is bad, not the battery. The Kindle's usb port is weak and has a high failure rate, it can be repaired but likely not worth it, unless you know how to solder connections.
So here's what happened.
About a year ago, I rooted my Kindle and flashed CM 10.1. Everything worked out great.
Fast forward to a few days ago, I thought it'd be cool to give the KF an update. Total mistake. I wanted to flash CM 11, but figured it'd be important to install the latest version of TWRP as well. Before I knew it, my Kindle Fire was bricked. In the process of updating TWRP, I downloaded and flashed the most recent img file (using Flashify), and after the device rebooted automatically, it wouldn't move past the silver/orange "Kindle Fire" screen. I've since tried a number of things, including powering the device on and off, and holding the volume up button to boot into TWRP, but nothing seems to work. I always end up getting stuck at the same screen.
I've also tried using Kindle Fire Unbrick Utility, but I get a "device not found" message. My computer makes a noise, as if to recognize the KF when it powers on, but within seconds, loses communication.
Am I screwed?
arthurk62 said:
So here's what happened.
About a year ago, I rooted my Kindle and flashed CM 10.1. Everything worked out great.
Fast forward to a few days ago, I thought it'd be cool to give the KF an update. Total mistake. I wanted to flash CM 11, but figured it'd be important to install the latest version of TWRP as well. Before I knew it, my Kindle Fire was bricked. In the process of updating TWRP, I downloaded and flashed the most recent img file (using Flashify), and after the device rebooted automatically, it wouldn't move past the silver/orange "Kindle Fire" screen. I've since tried a number of things, including powering the device on and off, and holding the volume up button to boot into TWRP, but nothing seems to work. I always end up getting stuck at the same screen.
I've also tried using Kindle Fire Unbrick Utility, but I get a "device not found" message. My computer makes a noise, as if to recognize the KF when it powers on, but within seconds, loses communication.
Am I screwed?
Click to expand...
Click to collapse
Can you get into fastboot? Did you restore your backup?
Don't worry you must have flashed TWRP for the wrong kindle generation.
Connect your kindle to your pc with the normal cable that is provided with your kindle. Now turn your kindle off and type the following in your cmd
fastboot -i 0x1949 getvar product
now it should show
< waiting for device >
then turn on your device
you should be in fastboot now.
From here follow this thread from step 2
forum.xda-developers.com/showthread.php?t=2128175
skullarc said:
Don't worry you must have flashed TWRP for the wrong kindle generation.
Connect your kindle to your pc with the normal cable that is provided with your kindle. Now turn your kindle off and type the following in your cmd
fastboot -i 0x1949 getvar product
now it should show
< waiting for device >
then turn on your device
you should be in fastboot now.
From here follow this thread from step 2
forum.xda-developers.com/showthread.php?t=2128175
Click to expand...
Click to collapse
I had a feeling that must've been the case.
I followed your directions, but can't get past the "<waiting for device> message in CMD. Turning the kindle on or off doesn't seem to make a difference. Am I doing something wrong? Are there other alternatives?
Did you follow the steps in the right order
Turn of Kindle
connect the wire
type command
when waiting for device is shown then only turn on your kindle
Similar Problem
skullarc said:
Don't worry you must have flashed TWRP for the wrong kindle generation.
Connect your kindle to your pc with the normal cable that is provided with your kindle. Now turn your kindle off and type the following in your cmd
fastboot -i 0x1949 getvar product
now it should show
< waiting for device >
then turn on your device
you should be in fastboot now.
From here follow this thread from step 2
forum.xda-developers.com/showthread.php?t=2128175
Click to expand...
Click to collapse
I have a similar problem. I try to give the "fastboot -i 0x1949 getvar product" in windows cmd but it just gves an error. Do I need to install something to fix this
My guess is you don't have the right drivers installed. You have to install the driver while the device is attempting fastboot. If you have the device manager up you'll see it flash for a second when it boots. Right click when it flashes and install the driver.