Related
Hi, Im having a huge problem with my kindle fire, in an attempt to root my device, i seem to have made a mistake somewhere along the line (I actually just wanted to select one background, but i was lead to all sorts of videos on youtube showing rooting procedures and i had to have it rooted to do so, so alas i rooted). My device upon power up starts up, loads yellow triangle (firefirefire?) and goes to the "Kindle Fire" screen and stops, it cannot load any further . I have tried numerous fixes such as updating but the files cannot be copied and flashed to my device, because i cannot copy them to my device from my pc. the option to do so is just not there.
I appreciate any help I can get, do i need to finish / fix a rooting procedure or unroot or what? thanks in advance.
When you get the fff screen try holding down the power button till it turns orange that will hopefully put you into twrp from there you could do a few things but try selecting reboot see what happens . Could be that it would just send you to the back to the same screen
testing
when I go into twrp, i click reboot, brings me to screen with two options (im sure you all know this). When pressing option one, system, it closes out of twrp, loads fff, loads the "Kindle Fire" screen, and is froze...
I then powered off by holding the power button for 1 mississippi, 2 mississippi... all the way to 11 mississippi
Turned back on, fff loads, held pwr for twrp, hit reboot, chose option two, power off, and this did just as it said it would, powered off...
Sorry I sound retarded while writing this, im just trying to be thorough
P.S. i have toyed around with twrp, totally reset all data and caches, done just about everything...
Go here
...and download FFF1.4
Mount your sdcard in recovery and transfer the FFF1.4.zip from your computer. Install FFF1.4 in recovery (no wipe) and reboot.
As soon as you see the Blue kindle fire logo, hold the power button until you see options show up on the bottom. Use the power button to scroll through the options and select "Normal Boot"
that would work but...
Hard to explain my situation... anyway, when i plug in my kindle, it does not play auto play, no way to put files from computer to kindle. I have gone into my devices and cant seem to find a way to open and veiw and edit the files on my device.
NeedHelp!!! said:
Hard to explain my situation... anyway, when i plug in my kindle, it does not play auto play, no way to put files from computer to kindle. I have gone into my devices and cant seem to find a way to open and veiw and edit the files on my device.
Click to expand...
Click to collapse
You have to access TWRP and select mount > mount sdcard and mount to USB
Are you saying that you tried this and it doesn't work?
Ok so i just did what you said, loaded up twrp, went to mount sd mounted, its plugged into a working usb, and i still cannot access files from my computer i was just messing with kindle fire utility 0.9.5 i beleive, and i chose the option that said install latest version of fff, it gave me a "kindle fire" screen with the android robot above it, but when kfu gets to the end it says dont touch kindle if its frozen, but on the kindle it prompts to reboot, should i reboot, wait, or forget that and try to fix the file veiwing problem... ive tried reboot and i loose the android over the kindle fire screen which origionally replaced the yellow triangle.
EDIT: Just toyed around with KFU more and got the yellow triangle screen to be replaced by android robot over "kindle Fire" text, still no luck on installing that file
NeedHelp!!! said:
Ok so i just did what you said, loaded up twrp, went to mount sd mounted, its plugged into a working usb, and i still cannot access files from my computer i was just messing with kindle fire utility 0.9.5 i beleive, and i chose the option that said install latest version of fff, it gave me a "kindle fire" screen with the android robot above it, but when kfu gets to the end it says dont touch kindle if its frozen, but on the kindle it prompts to reboot, should i reboot, wait, or forget that and try to fix the file veiwing problem... ive tried reboot and i loose the android over the kindle fire screen which origionally replaced the yellow triangle.
EDIT: Just toyed around with KFU more and got the yellow triangle screen to be replaced by android robot over "kindle Fire" text, still no luck on installing that file
Click to expand...
Click to collapse
That might be that you had your kindle plugged in when you ran the bat file for the drivers and it wiped out your USB mass storage drivers in the process my suggestion is to restore your computer back to a time before you messed with the drivers and see if you can't get mass storage mounted via USB before.without your kindle plugged in run the driver install to regain adb then plug the kindle in you should have working adb and mass storage driver then
---------- Post added at 10:25 PM ---------- Previous post was at 10:20 PM ----------
Hopefully I won't muddy up your situation but I did the same thing myself once on the driver thing that's why I believe you can't access SD on your kindle
---------- Post added at 10:30 PM ---------- Previous post was at 10:25 PM ----------
And soupmagnet is right he's trying to get you out of fast boot with his suggestion the bootloader he pointed you to has that option. As long as you can access twrp and mass storage you have a lot of options on what to do next mess that up and you'll brick your kindle so take your time relax do it right. Also if you can still access twrp check your battery level there don't let it die you can still charge while in twrp I believe so if it gets low plug it in give it a rest and see if your battery level doesn't come up this will save you a bunch of heartache.
NeedHelp!!! said:
Ok so i just did what you said, loaded up twrp, went to mount sd mounted, its plugged into a working usb, and i still cannot access files from my computer i was just messing with kindle fire utility 0.9.5 i beleive, and i chose the option that said install latest version of fff, it gave me a "kindle fire" screen with the android robot above it, but when kfu gets to the end it says dont touch kindle if its frozen, but on the kindle it prompts to reboot, should i reboot, wait, or forget that and try to fix the file veiwing problem... ive tried reboot and i loose the android over the kindle fire screen which origionally replaced the yellow triangle.
EDIT: Just toyed around with KFU more and got the yellow triangle screen to be replaced by android robot over "kindle Fire" text, still no luck on installing that file
Click to expand...
Click to collapse
Reading this has given me a headache so let me make sure I understand it correctly.
You tried to mount your sdcard and you say it mounted but it didn't show up on your computer? With Windows Explorer open, while switching between mounting and unmounting the sdcard, nothing happens? Nothing is being added, like "F:\" or "D:\"?
Also, you said you used the KFU to install FFF and it worked because your boot screen has changed (which by the way isn't the latest version). With that, your drivers are obviously working properly.
So make sure you have FFF1.4 downloaded from HERE, rename it to fff.zip and place it in the "tools" folder of your KFU directory along with adb.exe.
Boot into TWRP
Shift+right click on the KFU "tools" folder and select "Run in Command..."
In the prompt that opens, enter the following command:
Code:
adb push fff.zip /sdcard
Reboot your device and back into recovery. The fff.zip should be there for you to flash. Don't wipe before installing.
If successful, your boot screen will be a blue Kindle Fire logo. Then read the FFF1.4 thread OP to learn how to change your bootmode to normal.
sigh
done! fixed the problem! some of the drivers the computer needed to veiw my F: drive. but i downloaded all the files needed onto a different pc, and it worked just fine! copied amazons latest update to get out of all rooting hooplah, so im unrooted, but im happy my kindle is up and running thanks for the help
NeedHelp!!! said:
done! fixed the problem! some of the drivers the computer needed to veiw my F: drive. but i downloaded all the files needed onto a different pc, and it worked just fine! copied amazons latest update to get out of all rooting hooplah, so im unrooted, but im happy my kindle is up and running thanks for the help
Click to expand...
Click to collapse
Good to know thought it was your drivers
Alright so I used KFU to root my kindle to android market then I used TWRP to install CyanogenMod 7. Everything was fine tell I wanted to restore to stock. I downloaded the Kindle Fire 6.3 installed it then my kindle rebooted. After this happened, everytime it comes on dimly lit then goes to the brightest setting then goes back to dim brightness all while remaining on the standard kindle fire load screen. The letter animation stops shortly after it goes back to dim brightness. On my computer it no longer shows up under my computer but in device manager it is called a Amazon kindle under disk drives with 0 mb of space. On KFU I can get it to show up ADB online but status is Unkown. After I try to change boot mode (normal, fastboot, and recovery) or try and install any of it the kindle turns out comes back on for 4 to 6 seconds then shuts off comes back on and freezes. Also before changing boot mode any one I click it says is no longer on the device. I have also tryed KF unbrick with no help ether.
Does anyone know how to fix this pleas and think you.
mellowboombox said:
Alright so I used KFU to root my kindle to android market then I used TWRP to install CyanogenMod 7. Everything was fine tell I wanted to restore to stock. I downloaded the Kindle Fire 6.3 installed it then my kindle rebooted. After this happened, everytime it comes on dimly lit then goes to the brightest setting then goes back to dim brightness all while remaining on the standard kindle fire load screen. The letter animation stops shortly after it goes back to dim brightness. On my computer it no longer shows up under my computer but in device manager it is called a Amazon kindle under disk drives with 0 mb of space. On KFU I can get it to show up ADB online but status is Unkown. After I try to change boot mode (normal, fastboot, and recovery) or try and install any of it the kindle turns out comes back on for 4 to 6 seconds then shuts off comes back on and freezes. Also before changing boot mode any one I click it says is no longer on the device. I have also tryed KF unbrick with no help ether.
Does anyone know how to fix this pleas and think you.
Click to expand...
Click to collapse
One of two things has probably happened here. Either you did not use the factory reset to delete the /data partition prior to flashing the stock software or the system software is damaged or missing from the /system partition. If at all possible, you will have to try to put your KF into fastboot mode using adb. Unfortunately, the odds are against you and my guess is any "adb shell" command will fail. Temporary fastboot through the bootloader is also a non-starter because you have the stock bootloader installed. That leaves the factory cable or opening the back cover as your last two options. The details are spelled out here...
http://forum.xda-developers.com/showthread.php?t=1668159
I suggest you get the factory cable, reflash TWRP, and try a factory reset. If that doesn't work, wipe the system partition as well, unmount all partitions and try flashing the stock software again.
Hello, sorry for my bad english.
Im a noob and have been looking and trying different things for days now and can't fix my KFHD8.9", I would greatly appreciate any help. Sorry if this have been asked, but ive tried everything and nothing seems to work or match the same problems.
I rooted my kindle fire hd 8.9" (8.4.6) and tried to install the 2nd bootloader + twrp (to eventually install CM10.2) using this guide (http://forum.xda-developers.com/showthread.php?t=2277105), but stupidly, I didn't back up on step 2. I attempted to flash the bootloader using fireflash and, as long as I could make it I did everything that was needed. I rebooted and pushed the volume up while booting, and it went to the blue logo and then into fastboot screen and then stoped there.
My pc (Windows 8) didn't recognized the device while in the fastboot screen as a kindle but as a portable device called "jem-PVT-prod-04"
I rebooted my KFHD pressing power button, and when starting again, I saw the orange logo, then the blue logo and it just got stuck there.
So now I just can get to the fastboot screen (by pressing volume up while its booting) or get stuck in the blue kindle fire logo if i dont press anything.
I would like to add also that while on the fastboot screen , My PC wont communicate with my device. I have the Android SDK installed and could use ADB before this happened.
I have tried the commands -i 0x1949 getvar product and -i 0x1945 reboot as suggested on many posts, but both of them stays in "waiting for device" for ever.
Then i tried using Kindle Fire First Aide as suggested on other posts but after downloading everything it gave me an error about something not matching with my device and what i was trying to do.
In top of that, somewhere I got the impression that I just got stuck in the middle of the procedure and that I could still install TWRP or flash a rom,
So now I don't know if my device is bricked, or stuck in the middle of the procedure or what, but if anyone could help me get back to the stock firmware or to twrp or something other than this two screens (blue logo or fastboot screen) it would be spectacular
thanx in advance.
I'm having the same exact issue more or less, but I can't pass the orange Kindle logo. My computer will recognize the Kindle for about all of 2 seconds, but only as Jem_.... then disconnects so I can't enter fastboot or move forward at all. I'm hoping that someone can help with this.
You have to install the driver for the jem device with the drivers in my signature before fastboot commands will work. Try holding volume down instead of up, it should go into recovery instead of fastboot if I remember right.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Recd msg alert stunts513 to the error while using wallpaper fix 2.1
I am having a terrible time with this Kindle HD 2nd generation table I tried to root. I was following this guys post on You tube and got it rooted but something when wrong when I tried installing the 2nd bootloader and twrp. I ended up stuck with a blue kindle logo. I tried turning it on with the volume button pushed to the left and it went from orange to blue and then to the twrp recovery menu. That was a few days ago, Its been stuck in that mode ever since, there are no back up folders and I think was making the problem worse, as it seems I could do the adb push and now I cant, well at least i couldnt before running your wallpaper fix 2.1 I ran it once and it wouldnt take I dont remember the error, but my table was at the blue logo screen. I remembered reading about running something while you powered the device on because there was an few seconds of access to something, I cant remember so I tried that and unknown to me It appears from these notes i found that I suscessfully installed it - then tried again -then something about the backup??? I am going to cut and paste it here and not do a thing until I hear from you, as I dont want to mess it up. I didnt know the fix worked cause i was watching the command screen and not the side of the file where i have your tool on my desktop.
Here is everything from that run. in the attached file
OK so lemme get this straight, you are stuck in twrp without adb access? Also I will have to double check on my PC but when I download that file its not a PDF but a text file and its HTML with a 404 error message in it when I view it on my kindle.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
OK so lemme get this straight, you are stuck in twrp without adb access? Also I will have to double check on my PC but when I download that file its not a PDF but a text file and its HTML with a 404 error message in it when I view it on my kindle.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
Yes somehow I have twrp and I think when I first got into the bootloop I had adb access but in fumbling around trying to fix it I lost adb access.
If I turn the kindle off, and then push power and do nothing it powers up with the yellow logo and in 4 seconds that log turns blue and it stays that way until i turn it off. In this state checking device manager it shows the device as an android phone, Android ADB interface. If I unplug the device the device manager no longer shows it - If I power up the device and while the logo is still yellow push the volume button to the left it boots to twrp
I re did the notes in a new pdf file I hope you can access them now. I tried looking at them from my post on my pc and got that same access code error. I cant win on this thing tonight,
Thanks for getting back to me so quickly
John
The tutorial at: http://forum.xda-developers.com/showthread.php?t=2277105 tells you, in step 4, to place a custom ROM on the Kindle before you reboot into twrp. You then install that from from within twrp and then you get past the blue logo. If you didn't put the custom ROM on your kindle and adb isn't working then you need to install the abd drivers from stunts513's forum signature then do the twrp adb sideload.
Relevant sections from the tutorial:
Once you have the .zip files for the ROMs with GApps (Google apps, like Play Store), place them on the sdcard, and turn off the device. Turn it on, hold Volume-Up before the logo turns blue, and enter TWRP. Once there, immediately do two things: make a backup, and after that, wipes: system, factory reset, cache, and Dalvik cache. After these two things are done, go ahead and flash the .zip file, and wait for it to finish. After it finishes, go ahead and again, wipe cache and Dalvik cache, then reboot. After you rebooted, wait 5 minutes, then reboot again, and you're all done!
Click to expand...
Click to collapse
6. Wiped /sdcard, can't reboot from recovery: You thought you had the ROM file on the sdcard, but you didn't, and wiped everything, so without a ROM image, you can't boot into system.
Solution: Put the ROM file where your ADB binary is (usually inside platform-tools folder in Android SDK directory) and rename it rom.zip. On the device, boot into TWRP, select Advanced, then ADB Sideload. Connect device to PC. From here, run "adb" and hit Enter to check for your binary version, if it's anything lower than 1.0.3.0, you need to update the binaries by re-installing the latest Android SDK. Once the device is in sideloading mode and is connected to the PC, type "adb sideload rom.zip" and hit Enter. Now you'll find the ROM on the sdcard, flash, and you're done.
Click to expand...
Click to collapse
Hope this helps... someone.
pitcrawler said:
The tutorial at: http://forum.xda-developers.com/showthread.php?t=2277105 tells you, in step 4, to place a custom ROM on the Kindle before you reboot into twrp. You then install that from from within twrp and then you get past the blue logo. If you didn't put the custom ROM on your kindle and adb isn't working then you need to install the abd drivers from stunts513's forum signature then do the twrp adb sideload.
Relevant sections from the tutorial:
Hope this helps... someone.
Click to expand...
Click to collapse
Your post fixed my bricked tablet, THANK YOU SO MUCH. There is so much info that its confusing for a noob like me - I followed the directions you posted and I am in. thank you, thank you, thank you
Jdoki said:
Your post fixed my bricked tablet, THANK YOU SO MUCH. There is so much info that its confusing for a noob like me - I followed the directions you posted and I am in. thank you, thank you, thank you
Click to expand...
Click to collapse
Yeah, I know there's a lot of information. It took me a long time and a lot of research before I attempted it as a noob myself. An important thing is to follow the tutorials word for word and skip nothing, and cross your fingers.
Got fastboot comunication between PC and KFHD
stunts513 said:
You have to install the driver for the jem device with the drivers in my signature before fastboot commands will work. Try holding volume down instead of up, it should go into recovery instead of fastboot if I remember right.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
Thanx a lot for the quick response! :good: I was finally able to install your great drivers. I had to be quick as you said in some other posts, because the pc only detects it for a little while, when the logo it's still orange on the kindle, I think. After that, and while on fastboot screen, my device manager would detect a Jem-something device, but could not install any drivers on it. So I had to install the drivers really fast while in the orange logo, oh, and had to disable the drivers signature check on windows 8 also.
Now I can use fastboot commands to reboot the kindle, but I can still only get to the blue logo or the fastboot screen.
I guess this means I now can use the kindle first aide to go back to stock and try again for the TWRP and 2nd bootloader. I'll post if I can't make my kindle boot normal again later.
Do you know if this was my kindle being bricked or was it something else?
Thanks a lot again, I was very worried that i wasn't getting anywhere. .:laugh:
Stuck on blue logo!
Hi!
I'm having a similar problem... I recently got a second hand Kindle 2nd Generation already rooted with Cyanogenmod 10.1.3.otter2 on it. Google Play and some other apps where having issues, so I decided to downgrade. After testing a couple of different ROMs, I got stuck on the blue logo, an infinite booting screen. Funny enough, I think the mistake was to install a Fire first generation ROM into a 2nd generation. Anyway, long story short, I've tried everything, Kindle First Aide (won't help because it seems that all the options need me to be in the desktop of the tablet and I can't get there), SDK ADB will see the device but return a device offline... I'm running out of options and don't really know what to do!
Any ideas guys??
EricMitjans said:
Hi!
I'm having a similar problem... I recently got a second hand Kindle 2nd Generation already rooted with Cyanogenmod 10.1.3.otter2 on it. Google Play and some other apps where having issues, so I decided to downgrade. After testing a couple of different ROMs, I got stuck on the blue logo, an infinite booting screen. Funny enough, I think the mistake was to install a Fire first generation ROM into a 2nd generation. Anyway, long story short, I've tried everything, Kindle First Aide (won't help because it seems that all the options need me to be in the desktop of the tablet and I can't get there), SDK ADB will see the device but return a device offline... I'm running out of options and don't really know what to do!
Any ideas guys??
Click to expand...
Click to collapse
You need to push a ROM onto TWRP. You should still be able to access TWRP. http://forum.xda-developers.com/showthread.php?t=2459498 be glad you did not hard brick it.
Hi, i accidentally deleted everything, including my OS while trying to restore my kindle to its original state. Your help would be appreciated!
-its stuck in the KF logo (white and orange, meaning original bootloader)
-I cannot access TWRP
-when i try to use KFU, it says ADB status: online ; boot status : unknown
-when i try to install TWRP via KFU, it gets stuck in " waiting for device" ( i guess i cant go into fastboot mode)
-i'm not accessible to a factory cable because im not from the us
Help me please
Thank you!
I did something very similar.
june726 said:
Hi, i accidentally deleted everything, including my OS while trying to restore my kindle to its original state. Your help would be appreciated!
-its stuck in the KF logo (white and orange, meaning original bootloader)
-I cannot access TWRP
-when i try to use KFU, it says ADB status: online ; boot status : unknown
-when i try to install TWRP via KFU, it gets stuck in " waiting for device" ( i guess i cant go into fastboot mode)
-i'm not accessible to a factory cable because im not from the us
Help me please
Thank you!
Click to expand...
Click to collapse
I am having a similar issue like yours. Yesterday I tried downloading Jellybean onto my Kindle. I did all of the precautions, TWRP, KFU, etc.
And right as I thought I was done, boom, I get stuck in an infinite re boot. Every time it finally boots up it says android.process.phone for not even a full second and immediately reboots. I am not the smartest, but if someone could walk us through a way to restore our kindles or fix the problem. I would be most gracious! I am not sure what the ADB is as well. Is that what I am missing?
june726 said:
Hi, i accidentally deleted everything, including my OS while trying to restore my kindle to its original state. Your help would be appreciated!
-its stuck in the KF logo (white and orange, meaning original bootloader)
-I cannot access TWRP
-when i try to use KFU, it says ADB status: online ; boot status : unknown
-when i try to install TWRP via KFU, it gets stuck in " waiting for device" ( i guess i cant go into fastboot mode)
-i'm not accessible to a factory cable because im not from the us
Help me please
Thank you!
Click to expand...
Click to collapse
Have you guys checked this out???
http://forum.xda-developers.com/showthread.php?t=1428428
lj50036 said:
Have you guys checked this out???
http://forum.xda-developers.com/showthread.php?t=1428428
Click to expand...
Click to collapse
Yes, i've tried downloading that. But i can't seem to run it correctly. When i open it, it just opens a command promt and then closes immediately.
SDK
june726 said:
Yes, i've tried downloading that. But i can't seem to run it correctly. When i open it, it just opens a command promt and then closes immediately.
Click to expand...
Click to collapse
OK well go get this for your PC make sure you get the one for your os....make sure you get the zip not the exe.... It will be like a 400 to 500 meg dowload....
http://developer.android.com/sdk/index.html
Controverly areadvia
lj50036 said:
OK well go get this for your PC make sure you get the one for your os....make sure you get the zip not the exe.... It will be like a 400 to 500 meg
I downloaded the sdk and i can now use adb. But, my problem now is that i cannot copy the fbmode to my kindle via adb. When i push it to a location, it says that my kindle is read only. So without the fbmode, i cannot boot into fastboot, cannot install fff and twrp and no os again. what should i do now?
Click to expand...
Click to collapse
june726 said:
I downloaded the sdk and i can now use adb. But, my problem now is that i cannot copy the fbmode to my kindle via adb. When i push it to a location, it says that my kindle is read only. So without the fbmode, i cannot boot into fastboot, cannot install fff and twrp and no os again. what should i do now?
Click to expand...
Click to collapse
Ok.. Well than lets see here.....When can you use adb??? I need as much info as possible... What file are you moving..... Where are you trying to move it to... Copy and paste your commands and outputs this will make it much easier for me and anyone else that would like to help....Thx lj
Phil700 said:
I am having a similar issue like yours. Yesterday I tried downloading Jellybean onto my Kindle. I did all of the precautions, TWRP, KFU, etc.
And right as I thought I was done, boom, I get stuck in an infinite re boot. Every time it finally boots up it says android.process.phone for not even a full second and immediately reboots. I am not the smartest, but if someone could walk us through a way to restore our kindles or fix the problem. I would be most gracious! I am not sure what the ADB is as well. Is that what I am missing?
Click to expand...
Click to collapse
Well your problem is nowhere near the same as June's, but I'll go ahead and try to help your anyway. I've had this happen to me once or twice. My suggestion is to redownload your rom and gapps, and then try flagging them again. Hopefully that should work. There is an option in TWRP to mount your kindle on your computer.
Sent from my Nexus 7 using Tapatalk
So far.
Guys, sorry I might not have explained the issue in enough detail. Although the information is full of things that are helpful. It didn't quite help me.
Sorry about having to deal with a compete noob here...
---I'll list my issues to isolate confusion.---
-I cannot boot ADB, I click on it, a cmd window pops up and then immediately closes each time I proceed to open it. for a start, if someone could perhaps tell me what I am doing wrong, because I know I must not be doing what all of you pros are doing.
-Although I had TWRP installed on both my pc and kindle. Whenever I boot up my kindle, I do not get the blue and gray "Kindle Fire" logo before the Orange and White logo. So that for me was very frustrating.
-The Kindle Fire Utility is not detecting my device at all. Which is worrying me to death, the Kindle Fire Unbrick utlity is not working either which is killing me inside.
-For a detailed description of what my kindle fire does when I press the power button goes as so: I press the power button, the orange and white Kindle Fire logo pops up for a few seconds like normal, then it proceeds to boot or "Attenpt" to boot the Jellybean OS, after waiting 5 minutes, the OS lock screen pops up with "android.phone.com" or "phone.android.com" pops up, for a second, then it proceeds to fully rebooting the OS for another 5 minutes. It does it indefinitely.
So does this mean my kindle is officially done for? Bricked? Or is there still hope for me. This is really depressing, I spent most of my money on this, money is tight for me right now ant I use my kindle for school and research. It is a vital tool to me. I need all the help I can get.
Thanks for all of the help so far. You guys really know what you are doing, thanks!
System deleted Need Help !!!! Please
Recently I tried to install android in my Kindle Fire HDX 7 and I install a thing called FireFireFire I think to my kindle then It messed up everything, so I don't know what to do and I wiped all my data and even the Option called SYSTEM. after that I reboot my Kindle and all I have is KINDLE FIRE on the screen that's it. I can't use my Kindle at all ,and the computer won't let me install the driver all it told me is MTP USB device.and I tired to use all kind of tool to fix my kindle and CMD told me Can't Find Device. I m really not good at android so I really need someone help me !!!
Happyy said:
Recently I tried to install android in my Kindle Fire HDX 7 and I install a thing called FireFireFire I think to my kindle then It messed up everything, so I don't know what to do and I wiped all my data and even the Option called SYSTEM. after that I reboot my Kindle and all I have is KINDLE FIRE on the screen that's it. I can't use my Kindle at all ,and the computer won't let me install the driver all it told me is MTP USB device.and I tired to use all kind of tool to fix my kindle and CMD told me Can't Find Device. I m really not good at android so I really need someone help me !!!
Click to expand...
Click to collapse
Nothing here works for the HDX result=permabrick. All support for HDX is here http://forum.xda-developers.com/kindle-fire-hdx .
Phil700 said:
Guys, sorry I might not have explained the issue in enough detail. Although the information is full of things that are helpful. It didn't quite help me.
Sorry about having to deal with a compete noob here...
---I'll list my issues to isolate confusion.---
-I cannot boot ADB, I click on it, a cmd window pops up and then immediately closes each time I proceed to open it. for a start, if someone could perhaps tell me what I am doing wrong, because I know I must not be doing what all of you pros are doing.
-Although I had TWRP installed on both my pc and kindle. Whenever I boot up my kindle, I do not get the blue and gray "Kindle Fire" logo before the Orange and White logo. So that for me was very frustrating.
-The Kindle Fire Utility is not detecting my device at all. Which is worrying me to death, the Kindle Fire Unbrick utlity is not working either which is killing me inside.
-For a detailed description of what my kindle fire does when I press the power button goes as so: I press the power button, the orange and white Kindle Fire logo pops up for a few seconds like normal, then it proceeds to boot or "Attenpt" to boot the Jellybean OS, after waiting 5 minutes, the OS lock screen pops up with "android.phone.com" or "phone.android.com" pops up, for a second, then it proceeds to fully rebooting the OS for another 5 minutes. It does it indefinitely.
So does this mean my kindle is officially done for? Bricked? Or is there still hope for me. This is really depressing, I spent most of my money on this, money is tight for me right now ant I use my kindle for school and research. It is a vital tool to me. I need all the help I can get.
Thanks for all of the help so far. You guys really know what you are doing, thanks!
Click to expand...
Click to collapse
Hey Phil. Doesn't look like you've posted anything else, so you probably won't see this. But oh well... Sorry your problem got left in the dust. I didn't mean for that to happen. You need to shift + right click in the folder with adb.exe and click "open command window here" and then you can do your things. As far as everything else: does your computer do anything when you plug your kindle into it?
I accidentally did this once (at least I think it's the same) and what I did was I went into ADB and side loaded a custom ROM I used CM
Hi there!
I think I may have bricked my Fire TV Stick 1 (bought at launch in Germany)...
Current situation:
- stick turns on, shows white amazon logo on black background
- continuously rebooting; ~5s black screen, ~5s amazon logo
After months not having it used, I found out I may be able to root it by now. So I did research over the vast amount of threads and posts and was overwhelmed by the information... So I tried to get started but struggled to find the right steps and therefore maybe failed.
I updated it to 5.0.5 (stock) and tried King Root, then Kingo Root, which was a success.
I tried to use the TWRP 3.0.0-7 v2 zip and used the sh command from the respective thread (I thought that was it, since all my devices before used either TWRP or CWM).
To this point, all went through and I wanted to reboot into recovery, but there was only this generic (stock?) red text recovery screen. I waited to be sure, nothing happened and I unplugged it to reboot.
It booted fine and I reflashed the TWRP zip, in case I didn't do it properly. Again it did as expected.
I then pushed the latest prerooted 5.2.0.1 zip and rebooted to recovery, but again this generic screen, so I unplugged it early, I think.
From there on, I got stuck at the white amazon logo, see above.
I did not unlock the bootloader, adb shell confirmed it not being unlocked before.
During bootloops, I did not manage to get any control via adb or fastboot.
So, is it bricked once and for all? If not, how can I save it?
I don't care about anything stored on it.
I also have a Y-USB-OTG cable and connected a keyboard before, but could not interfere yet.
(If bricked, would a Teensy be of any use? I have one from CCast rooting days)
Thanks for reading and in advance.
I had same problem with my fire stick when used the USB power of my TV.
Did you try to power the fire stick TV with the power point and USB adapter?
l_aios said:
Hi there!
I think I may have bricked my Fire TV Stick 1 (bought at launch in Germany)...
Current situation:
- stick turns on, shows white amazon logo on black background
- continuously rebooting; ~5s black screen, ~5s amazon logo
After months not having it used, I found out I may be able to root it by now. So I did research over the vast amount of threads and posts and was overwhelmed by the information... So I tried to get started but struggled to find the right steps and therefore maybe failed.
I updated it to 5.0.5 (stock) and tried King Root, then Kingo Root, which was a success.
I tried to use the TWRP 3.0.0-7 v2 zip and used the sh command from the respective thread (I thought that was it, since all my devices before used either TWRP or CWM).
To this point, all went through and I wanted to reboot into recovery, but there was only this generic (stock?) red text recovery screen. I waited to be sure, nothing happened and I unplugged it to reboot.
It booted fine and I reflashed the TWRP zip, in case I didn't do it properly. Again it did as expected.
I then pushed the latest prerooted 5.2.0.1 zip and rebooted to recovery, but again this generic screen, so I unplugged it early, I think.
From there on, I got stuck at the white amazon logo, see above.
I did not unlock the bootloader, adb shell confirmed it not being unlocked before.
During bootloops, I did not manage to get any control via adb or fastboot.
So, is it bricked once and for all? If not, how can I save it?
I don't care about anything stored on it.
I also have a Y-USB-OTG cable and connected a keyboard before, but could not interfere yet.
(If bricked, would a Teensy be of any use? I have one from CCast rooting days)
Thanks for reading and in advance.
Click to expand...
Click to collapse
I guess you did not read enough.
At this point in time you can only root (kingoroot or kingroot) and replace root with SuperSu on a Firestick. TWRP (recovery) can not be installed because it was not released by rbox as of yet, that particular recovery\pre-rooted image is for firetv1 upgraded to OS5 and not for firestick.
Sorry man.
Have you tried to connect to a computer via USB and run kingoroot or kingroot for windows (whatever you used)? It is a small chance that will recover but it is a slim one....
mjnman said:
I had same problem with my fire stick when used the USB power of my TV.
Did you try to power the fire stick TV with the power point and USB adapter?
Click to expand...
Click to collapse
I could not remember, so I just retried it with two different chargers and two different cables (both used to power my Nexus 5).
Unfortunately resulting in the very same loop... But thanks nonetheless.
bula1ca said:
I guess you did not read enough.
At this point in time you can only root (kingoroot or kingroot) and replace root with SuperSu on a Firestick. TWRP (recovery) can not be installed because it was not released by rbox as of yet, that particular recovery\pre-rooted image is for firetv1 upgraded to OS5 and not for firestick.
Sorry man.
Have you tried to connect to a computer via USB and run kingoroot or kingroot for windows (whatever you used)? It is a small chance that will recover but it is a slim one....
Click to expand...
Click to collapse
Dang... Usually I don't make mistakes this dumb. Guess I learned my first lesson. I'll try to trace my mistake though, for future attempts.
I rooted it with the Kingo app, I think, and got that typical "stuck at 90%" and rebooted it like others did. It rebooted fine and Kingo verified it rooted.
I did not use Windows, I use Ubuntu, occasionally with Wine, yet I had no luck passing USB devices to it. (And always these missing libs...)
Normally, adb and fastboot (console) work fine (i.e. with my phone).
Now I have no chance to interfere with the bootloop, I think.
IIRC, sometimes I could spam commands and at one point adb was stuck at "waiting for device".
I tried to reproduce it just now, but could not get it again.
So, should I try adb or fastboot on another computer to be sure?
Would King(o) for Windows be of any help at this point? If so, what would be my best bet to catch it at some point I can recover it?
Is there any other way I could try? From my nooby perspective, could the bootsplash be an entrance for fastboot? Could it be just stuck trying to access erroneous partitions?
At this point I would try the most crazy and risky idea, since it is unusable anyway.
Thanks both of you for your answers.
l_aios said:
I could not remember, so I just retried it with two different chargers and two different cables (both used to power my Nexus 5).
Unfortunately resulting in the very same loop... But thanks nonetheless.
Dang... Usually I don't make mistakes this dumb. Guess I learned my first lesson. I'll try to trace my mistake though, for future attempts.
I rooted it with the Kingo app, I think, and got that typical "stuck at 90%" and rebooted it like others did. It rebooted fine and Kingo verified it rooted.
I did not use Windows, I use Ubuntu, occasionally with Wine, yet I had no luck passing USB devices to it. (And always these missing libs...)
Normally, adb and fastboot (console) work fine (i.e. with my phone).
Now I have no chance to interfere with the bootloop, I think.
IIRC, sometimes I could spam commands and at one point adb was stuck at "waiting for device".
I tried to reproduce it just now, but could not get it again.
So, should I try adb or fastboot on another computer to be sure?
Would King(o) for Windows be of any help at this point? If so, what would be my best bet to catch it at some point I can recover it?
Is there any other way I could try? From my nooby perspective, could the bootsplash be an entrance for fastboot? Could it be just stuck trying to access erroneous partitions?
At this point I would try the most crazy and risky idea, since it is unusable anyway.
Thanks both of you for your answers.
Click to expand...
Click to collapse
Do you still have root? Is your stick responding to the su command?
If so read this post: http://forum.xda-developers.com/fire-tv/help/guidance-recovering-bootloop-firetv-t3446902
If not:
Try kingoroot for windows however it is a slim change in my opinion as you wrote a FireTv image to your FireStick.
Copy and paste from: http://forum.xda-developers.com/fire-tv/development/guide-fire-stick-replace-king-o-root-t3440923
"IF YOU RUN INTO SOFTBRICK ISSUE (stuck at fire tv logo)
Make sure you have ADB drivers properly installed in your windows pc/laptop.
connect a genuine usb lead to the firestick/pc.
download the windows version of KINGO ROOT and install it.
open KINGO ROOT on the pc with Fire Stick connected up to pc and tv.
wait for the button to pop up and click root.
if you dont see AFTV or get enable debugging in the KINGO ROOT program on pc/laptop please unplug the stick from usb and replug it back in.
if this still wont work restart the pc/laptop or try another pc/laptop.
you should after clicking root boot back up into your homescreen, if it doesnt boot back into your homescreen automatically, wait around 5 minutes and unplug usb and re-plug it again. "
bula1ca said:
Do you still have root? Is your stick responding to the su command?
If so read this post: http://forum.xda-developers.com/fire-tv/help/guidance-recovering-bootloop-firetv-t3446902
If not:
Try kingoroot for windows however it is a slim change in my opinion as you wrote a FireTv image to your FireStick.
Copy and paste from: http://forum.xda-developers.com/fire-tv/development/guide-fire-stick-replace-king-o-root-t3440923
"[...]"
Click to expand...
Click to collapse
Thanks for the links, but from what I see, I need to get past the bootloader splash for adb to work. I'm stuck at the white "amazon" splash, not the colored "FireTV Stick" splash after the amazon one.
Sorry for not making it clear (and for that amount of text that maybe hid it)...
From what I understand and recall, I did only flash the recovery, right? Or does it automatically flash the zip I pushed to internal storage?
And what confuses me, the first attempt booting into recovery AFTER flashing the wrong one I got the former mentioned screen with red text. Reboot worked and the Stick was running. So I did retry and got the same red text after rebooting to recovery. I assumed it did not flash again and unplugged it earlier than the first attempt. Since then it got stuck at the white bootsplash.
Since I am still a noob, it seems to me the system wasn't touched, maybe a faulty recovery integrity forcing the bootloader to loop.
l_aios said:
Thanks for the links, but from what I see, I need to get past the bootloader splash for adb to work. I'm stuck at the white "amazon" splash, not the colored "FireTV Stick" splash after the amazon one.
Sorry for not making it clear (and for that amount of text that maybe hid it)...
From what I understand and recall, I did only flash the recovery, right? Or does it automatically flash the zip I pushed to internal storage?
And what confuses me, the first attempt booting into recovery AFTER flashing the wrong one I got the former mentioned screen with red text. Reboot worked and the Stick was running. So I did retry and got the same red text after rebooting to recovery. I assumed it did not flash again and unplugged it earlier than the first attempt. Since then it got stuck at the white bootsplash.
Since I am still a noob, it seems to me the system wasn't touched, maybe a faulty recovery integrity forcing the bootloader to loop.
Click to expand...
Click to collapse
I have no idea what you did however it will not automatically flash your zip, problem is you installed TRWP that was not meant for Firestick and overwrote its booting sequence. You most probably would had recover from your first attempt by re-installing a new image but once you tried to install it again it most probably finished writing the whole thing and damaged booting sequence.
bula1ca said:
I have no idea what you did however it will not automatically flash your zip, problem is you installed TRWP that was not meant for Firestick and overwrote its booting sequence. You most probably would had recover from your first attempt by re-installing a new image but once you tried to install it again it most probably finished writing the whole thing and damaged booting sequence.
Click to expand...
Click to collapse
Yeah, sad thing I got the wrong device, should have taken my time even more...
I googled the screen I got to two times before getting stuck:
http://forum.xda-developers.com/showpost.php?p=65968901&postcount=60
First time I waited approx. 15 minutes before pulling the plug to reboot. Since I noticed no difference I tried again and got the same screen. But this time I pulled the plug earlier, <1 minute.
I'd like to add that my bootloader was locked. Can I damage the booting sequence by corrupting the recovery or was my mistake that major to be able to do that?
I googled some key combinations to get into recovery or to bypass it, but I don't know if I get the right keys.
With my remote control I don't think I have enough time to hold the keys. Additionally I have a USB keyboard (Cherry KC1000; if possible, which keys btw?) and may be able to connect it via powered Y OTG cable.
So if anyone got any further input or ideas for me to rescue my FTVS, I'd be glad to receive it.
Thanks to all.
Anyone else maybe an idea?
The thing is, I cannot believe it is unsavable.
To summarize the current state (please see full details above):
- stuck in bootloop, white amazon logo
- flashed wrong recovery, after first flash the system booted, after second flash it got stuck (characteristics above)
- never flashed anything other than recovery
Strange thing it booted in first place, but now it refuses. Also I got the screen I mentioned above and unplugged as described above.
Can I possibly bypass the recovery check and try to boot directly to system? Or maybe interrupt for fastboot access?
If connected to PC, can you see it thru 'lsusb'? Or 'dmesg | tail'?
Kramar111 said:
If connected to PC, can you see it thru 'lsusb'? Or 'dmesg | tail'?
Click to expand...
Click to collapse
I tried both
watch -n 0.5 'dmesg | tail'
and
watch -n 0.5 'lsusb'
but with no identification whatsoever.
I double-checked with my Nexus 5 on the same port with the same cable, it identified fine.
One last bump for ideas before putting it into the trash.