Related
Hi,
when I connect it to the PC me appears the window of "chosen connect" but any options use, start always the option selectionated in preselesction SETTING-> USB to PC also if I check option " you ask type of logon when me connection"
sorry for my english
tahnk you
Are you trying to say that your phone always connects to your computer as a USB device even if you select something different?
Sounds like it.
I've got a similar issue, my screen is dead so I can't select anything and it comes up as a disk drive. Kinda need to get it to active sync so I can back the phone up to restore to my new one.
Without being able to see or use the screen I can't, unless there is a keyboard method to choose activesync.
when I connect htc (with USB) to PC, appears this option selection:
(whatch the image to the link)
farm3.static.flickr.com/2007/4514994648_92afa7bd15.jpg
now, if I select the option disk-drive,
don't start option disk-drive but activesync because is preselect in menu "SETTING-> USB to PC"
(whatch the image to the link)
farm5.static.flickr.com/4060/4496803689_c5ace06880.jpg
the same think if I select the option activesync but the preselect in menu "SETTING-> USB to PC" is diskdrive, start option activesync...
the same think if I select the option activesync but the preselect in menu "SETTING-> USB to PC" is diskdrive, start option activesync...
Click to expand...
Click to collapse
This is the proper behavior
siusky said:
when I connect htc (with USB) to PC, appears this option selection:
(whatch the image to the link)
farm3.static.flickr.com/2007/4514994648_92afa7bd15.jpg
now, if I select the option disk-drive,
don't start option disk-drive but activesync because is preselect in menu "SETTING-> USB to PC"
(whatch the image to the link)
farm5.static.flickr.com/4060/4496803689_c5ace06880.jpg
Click to expand...
Click to collapse
This is not the correct behavior.
So it seems like it works properly if you have the preselection set as "diskdrive" One option could be to just leave it set there.
A common problem though, and is probably what is giving you trouble, is the checkbox "enable faster data syncronization". Frequently, this just doesn't work out (not sure why) and the computer can not establish an active sync connection. The ppc or activesync self corrects by defaulting to a diskdrive connection.
uncheck the "enable faste data syncronization" box in settings, restart your phone and pc (verify the box is still unchecked after restart) and try the active sync again. Let us know how it goes... good luck.
cbeck said:
This is the proper behavior
This is not the correct behavior.
So it seems like it works properly if you have the preselection set as "diskdrive" One option could be to just leave it set there.
A common problem though, and is probably what is giving you trouble, is the checkbox "enable faster data syncronization". Frequently, this just doesn't work out (not sure why) and the computer can not establish an active sync connection. The ppc or activesync self corrects by defaulting to a diskdrive connection.
uncheck the "enable faste data syncronization" box in settings, restart your phone and pc (verify the box is still unchecked after restart) and try the active sync again. Let us know how it goes... good luck.
Click to expand...
Click to collapse
Tried with the faster data box and without, mine starts active sync...which I want and need, it lasts for about one minute, then it disconnects and can no longer recognize the device unless I shut down the computer and do it again....but it just repeats this same things every time.
siusky said:
Hi,
when I connect it to the PC me appears the window of "chosen connect" but any options use, start always the option selectionated in preselesction SETTING-> USB to PC also if I check option " you ask type of logon when me connection"
sorry for my english
tahnk you
Click to expand...
Click to collapse
Hello!
Please insert this into registry:
Code:
[HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers]
"DefaultClientDriver"="RNDIS"
[HKEY_CURRENT_USER\Software\HTC\BootLauncher\Services\HTCUSBToPCPopUp]
"Module"="\\Windows\\HTCUSBToPCSrv.dll"
"Prefix"="UTP"
"Index"=dword:00000000
"Info"=dword:00000000
"Order"=dword:0000000a
"Flags"=dword:00000000
"Keep"=dword:00000001
"Context"=dword:00000000
"DisplayName"="HTCUSBToPC Service"
"Description"="USB To PC PopUp Service"
[HKEY_LOCAL_MACHINE\Software\OEM\USBtoPC]
"AskConnect"=dword:00000001
[HKEY_LOCAL_MACHINE\Software\HTC\USBToPCPopUP]
"OnlyTwoChoice"=dword:00000000
"ItemFlags"=dword:0000001f
"DeviceCompanion"=dword:00000000
"ShowTime"=dword:00000005
[HKEY_LOCAL_MACHINE\Software\OEM\USBtoPC]
"SyncMode"=dword:00000000
"EnableAdvanceChecked"=dword:00000001
"DisablePopUpUI"=dword:00000000
This should reset USB_To_PC to default settings and also ensure that you're running the proper driver.
Have a nice day,
Jackos
Just tried another cable...and it's working...idk why, but glad it's working again.
I have changed the keys of registry but i have the problem because ther is not some keys....
[HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers]
--> "DefaultClientDriver"="RNDIS" <----> (the value is Mass_Storage_Class) <--
[HKEY_CURRENT_USER\Software\HTC\BootLauncher\Services\HTCUSBToPCPopUp]
"Module"="\\Windows\\HTCUSBToPCSrv.dll"
"Prefix"="UTP"
"Index"=dword:00000000
"Info"=dword:00000000
--> "Order"=dword:0000000a <----> my value is 10(0X00000A) <--
"Flags"=dword:00000000
"Keep"=dword:00000001
"Context"=dword:00000000
"DisplayName"="HTCUSBToPC Service"
"Description"="USB To PC PopUp Service"
[HKEY_LOCAL_MACHINE\Software\OEM\USBtoPC]
"AskConnect"=dword:00000001
[HKEY_LOCAL_MACHINE\Software\HTC\USBToPCPopUP]
"OnlyTwoChoice"=dword:00000000
--> "ItemFlags"=dword:0000001f <----> I have not this key <--
--> "DeviceCompanion"=dword:00000000 <----> I have not this key <--
--> "ShowTime"=dword:00000005 <----> I have not this key <--
I have --> "Option" = 1(0X00001)
[HKEY_LOCAL_MACHINE\Software\OEM\USBtoPC]
"SyncMode"=dword:00000000
"EnableAdvanceChecked"=dword:00000001
"DisablePopUpUI"=dword:00000000
Just create the keys.
I tried to make a cab from those reg entries but couldn't make it install successfully...
There might be typo ("Advance" instead of "Advanced" ?) or is the cab I made not good for my machine (TP2) ?
Could anyone make OR help me make a working cab installer (without confirmation please, my "touch" screen is broken and I need it to put the original rom back before sending my TP2 back) ?
Thanks a lot
I had a problem accessing 3G when installing a new rom. After flashing a few roms and finding out that roms were not the issue, as well as applying a few radio updates and changing radios and a google on the internet, I found out what was the problem. The access point was not set up. Defrost's rom based on cyanogen mod had the massive APN List preloaded, hence I never ran into that problem. However, most roms did not.
Here's how to set it up
Creating a new access point
When you need to add another data connection on your phone, obtain the access point name and settings (including username and password if required) from your mobile operator.
1) From the Home screen, press MENU, and then tap Settings > Wireless & networks.
2) Tap Mobile networks > Access Point Names.
3) On the APNs screen, press MENU and then tap New APN.
4) On the Edit access point screen, enter the APN settings. Tap an APN setting item to edit it.
5) Go to this site and find your mobile network company name
6) Modify the settings as said
7) Press MENU and then tap Save.
You should now have working 3G!
Sources:
http://www.htc.com/www/howto.aspx?id=779&type=1&p_id=312
http://modmyi.com/wiki/index.php/Carrier_APN_Settings
java_saint said:
I had a problem accessing 3G when installing a new rom. After flashing a few roms and finding out that roms were not the issue, as well as applying a few radio updates and changing radios and a google on the internet, I found out what was the problem. The access point was not set up. Defrost's rom based on cyanogen mod had the massive APN List preloaded, hence I never ran into that problem. However, most roms did not.
Here's how to set it up
Creating a new access point
When you need to add another data connection on your phone, obtain the access point name and settings (including username and password if required) from your mobile operator.
1) From the Home screen, press MENU, and then tap Settings > Wireless & networks.
2) Tap Mobile networks > Access Point Names.
3) On the APNs screen, press MENU and then tap New APN.
4) On the Edit access point screen, enter the APN settings. Tap an APN setting item to edit it.
5) Go to this site and find your network
6) Modify the settings as said
7) Press MENU and then tap Save.
You should now have working 3G!
Sources:
http://www.htc.com/www/howto.aspx?id=779&type=1&p_id=312
http://modmyi.com/wiki/index.php/Carrier_APN_Settings
Click to expand...
Click to collapse
I thought you already had a thread on this and a mod said to post this in general?
If you think its apn problem, install the rom it works on and then download apn backup and restore. Use that to backup apns and then when you install a rom you want, use the same app to reinstall the apns you backed up.
Sent from my HTC Desire using XDA App
Good advice, but this doesn't need to be in development.
Sent from my HTC Desire
Moved to General as not development.
Hello, i am new here, and i will begin with this post
What do you need:
Android phone (obviously)
Windows 7 PC (XP are not tested, testers welcome)
X-Plore File Manager
Home WiFi Network
Steps:
1. Download X-Plore file manager at Play Market. (i cannot post links now)
2. Go to Control Panel > Network and Sharing center > Advanced sharing settings > click all to on. (if you are unsure / have an unsecured network just do this everytime you want to transfer!)
3. Connect your phone to your wifi network
4. Open X-Plore
5. Set up the LAN (if hidden click show > show LAN)
6. Add server. (Scan is not working on me.)
7. fill in the blanks. path and domain do not need to be filled. Username is your windows username and password if you use (blank if not used).
8. fill the IP with 192.168.1.2 (you can try with 192.168.1.3 / 1.4 etc.. 1.2 usually works if you connect the PC first.)
9. click test. (if connection failure go back to step 8!)
10. now you can open your Users directory! (if you want to open the C:/ D:/.. open the settings in X-Plore and switch Show Hidden Files to on)
now you can upload and download files from or to your PC!
if there is any questions you can ask here. I will reply as soon as i can.
i do all the steps correct, i find my server, but when i try to enter in the server i get wrong username password, i enter my windows user id and i dont have any password to my account.
good advice, but i find the SGY screen too small for browsing my PC.
I prefer using Samba Filesharing (https://play.google.com/store/apps/details?id=com.funkyfresh.samba) and access my SD Card from my windows PC
wifi file transfr pro
Sent from my GT-S5360 using xda app-developers app
Just use airdroid )
Sent from my GT-S5360 using xda premium
blackjack1942 said:
Just use airdroid )
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
Yep. Airdroid is the best of all Ive tried!
for me this is the best,full Access and exchange data whenever I want and when tethering.:good:give it a try,its awesome.
http://forum.xda-developers.com/showthread.php?t=1752928
LoL I'm always using bluetooth D:
Airdroid is better.
With airdroid you don't need to install nothing in your computer. And it's better because you can install apps, read your messages, call to somebody and it's all in your web browser.
but with the method from my post u have full acces of all files on the device,you can install apps,full acces of system files,send sms,costomize your phone,you can make all what you want and many more and thats all in tethering mode.with airdroid it doesnt go.for me tha best.and its all in your webbrowser too.
Tested and fully working on vista
thanks
Confirmed working on Win 8.1
however my setting is different
in X-plore windows, the fields need to be filled are Server; Username; Password
[Server]
you can find the IP by opening up cmd and type "ipconfig"
look at IPv4 Address, that's what you have to type in server field
[Username]
this field, type your windows ID (the ID you use with windows store)
[Password]
the password of your windows ID
Hope it helps for Win 8.1 user
revomalik said:
Confirmed working on Win 8.1
however my setting is different
in X-plore windows, the fields need to be filled are Server; Username; Password
[Server]
you can find the IP by opening up cmd and type "ipconfig"
look at IPv4 Address, that's what you have to type in server field
[Username]
this field, type your windows ID (the ID you use with windows store)
[Password]
the password of your windows ID
Hope it helps for Win 8.1 user
Click to expand...
Click to collapse
Thank you for the ipconfig info; I couldn't get it to work because I didn't know what the server address was. X-plore should include this information in their wiki page.
I constantly get 0xC00000BB error from X-Plore eventhough i properly configured my Windows 7 to be logged in.
Is there anyone having problems related to X-Plore's LAN feature that is not working properly?
kimiraikkonen85 said:
I constantly get 0xC00000BB error from X-Plore eventhough i properly configured my Windows 7 to be logged in.
Is there anyone having problems related to X-Plore's LAN feature that is not working properly?
Click to expand...
Click to collapse
I was using X-plore on my Xiaomi mi Box 4s without any issues but after reset my router X-plore doesn't find my pc on Lan network....
I didn't find a solution yet....
OK password forgotten you still can use the device, but you'll need a smartphone with mobile data and turn on the "Mobile hotspot". on the checking for software updates a.s.a.p. turn off the mobile hotspot it will say could not connect
UPDATE 1. for those who do not have access to hotspot. be prepared to disable your wifi at your modem.
agree to the next prompts it will ask you if you want to set up security create a 4-digit PIN i suggest 1234. After you create the 4-digit PIN, you turn off the tablet and turn it on again.
When the tablet is on again and "Enter PIN" appears, don't worry if you don't see the camera icon on the display. What you need is the USER icon (what I mean is that "human face" icon which is located on the TOP RIGHT CORNER). Click that "human face" icon, then you'll see "Add user" so click on that "Add user". Follow through as a new user, you'll need to create a Samsung account or if you have one already you'll need to log into your Samsung account. UPDATE 2. I SKIPPED THIS ACCOUNT SETUP.
UPDATE 3. You'll have 2 users, you will not be able to erase the first one.
now you have access to storage place the this https://dl.dropboxusercontent.com/u/...FRP_REMOVE.apk
to downloads run the app on install.
full tool here https://dl.dropboxusercontent.com/u/...pps Full.zip
go back to users first user owner tap it you will log in to that account it will say set up tablet drag the notification bar down software update smart switch ignore it enable WiFi connect to any one you can then tap setup tablet follow i will ask for a password i skipped it and got in and went to settings now i had access to backup and reset full wipe done smile
Thanks to everyone who has worked on this i have updated these instructions Originally Posted by dama0002
and it is working on all mm devices i have come across so far phones included.
FYI again for those who done have access to hotspot be prepared to disable your wifi at your modem timing is important.
i hope it helps
I'm trying to find information about a multimedia system i have installed in my Skoda, the sticker on the device says CNT100, which is manufactured by CarNeTek (device page - https://www.carnetek.com.tw/products_detail/15.htm, not sure if they are the manufactures or just a reseller).
The company which sell and install it locally are not willing to share any information about the device, and of course are not willing to unlock it (to install applications from the play store, tweak configuration, etc.).
On the device there are 6 dip switches (which i couldn't figure out what they control), and no visible button (to get into recovery), i can get to the play store, and install applications - but as soon the installation is completed - they get uninstalled (there is a list of application that are not automatically uninstalled).
The launcher looks like a custom local version, there is no way to get into the settings page and the notification bar cannot be clicked (or dragged down), if i click multiple times on the menu - i get a dialog for some configuration, where i'm prompt for password (the dialog has a random number on it - which i suspect is used to generate correct password).
is anyone familiar with this device? or can suggest a way to unlock it?
(attached images of the device and the boot screen)
Hey mrtowel!
Trying to figure out that as well.
You said "if i click multiple times on the menu"
Where is this menu? possible to send a photo of that?
I'm talking about an Israeli version
Seems to be customized by [email protected]
sorry but i was wrong describing the way to get to the password dialog, on the home screen - there is a weather widget, showing the weather on the left side and the clock on the right side, multiple taps on the weather allows you to reboot the device, while multiple taps on the clock gets you to the password dialog.
I made some progress with the device - still working on getting it unlocked completely, let me know if you want more details.
mrtowel said:
Seems to be customized by [email protected]
sorry but i was wrong describing the way to get to the password dialog, on the home screen - there is a weather widget, showing the weather on the left side and the clock on the right side, multiple taps on the weather allows you to reboot the device, while multiple taps on the clock gets you to the password dialog.
I made some progress with the device - still working on getting it unlocked completely, let me know if you want more details.
Click to expand...
Click to collapse
Hey!
Just found that new to me. Pushed 6 times on the clock of the weather widget and got a prompt for the password. I receive a 9 digit number with that.
Also found that if you do the same on the temperature indication, you'll be prompt for device restart.
So that's a progress.
Anyways, I will be happy to hear from you, what progress you have made on this.
Will send you a PM.
Did someone have any success?
Hello, i have a Toyota corolla 2016 with "android multimedia" that have only 2 apps without google play or any apps, the startup screen is like yours.
i wan to unlock the system, someone know how to do that?
gtrs36 said:
Hello, i have a Toyota corolla 2016 with "android multimedia" that have only 2 apps without google play or any apps, the startup screen is like yours.
i wan to unlock the system, someone know how to do that?
Click to expand...
Click to collapse
try to get to app store (in case it is installed) through one of the installed apps using the 'rate us' option, you can also try and push a play store link through bluetooth, if it works - the android system will launch the play store app, and you'll be able to setup your account.
Once you get to the play store - download and install Googel app (https://play.google.com/store/apps/details?id=com.google.android.googlequicksearchbox&hl=en) this will let you ask google assistant to 'Open Display Settings' (in my case this option let me enable the drag down menu, where i could easily access the settings and other stuff).
hope that helps
?
Hey did you succeed?
please help
Hi
did any one of you had any success with getting into setting menu ?
i can get to google play...but as was posted before, everything i try to install immediately erase itself.....
does any one have the approved app list from ituran ?
i do believe that together we can crack this....
thanks
Thanks for the tips I've made it to download youtube! But how I can bypass the limit to install all apps from play store?
Also how can I cancel the restrictions of using apps during drive?
Thanks
Allon
Hey @mrtowel any change you can share some more details?
I tried connecting to the USB with my laptop to try doing some adb commands but it did not detect anything
I'm also wondering about the dip switch
and how to get the password bypass
Would really like to hear some more details if you can share please?
Just came here to see if can recall my steps from last time i played with the device (i kind of gave up, as it worked well with what there is, but recent update made it work really slow).
turns out there is a post on facebook (https://facebook.com/groups/gilcar/permalink/729881061134680/?comment_id=729883497801103), i'm going to try and build some utility to generate unlock codes (last time, i managed to get to an adb terminal, but i wasn't aware of the `pm hide` option to disable the installation blocker ****).
will post updates here if i get some progress
For anyone interested, attached the list of whitelisted apps. a jar to generate the code to enable tech mode and how i disabled the installation blocker
For the jar - you would need to get your device Wifi MAC address (see old post from 2019 on how to enable the navigation bar), which can be retrieved from the 'אודות' section. (run the jar by running 'java -jar codeGen_jar.jar 00:11:22:33:44:55' - replace the numbers with your device mac address)
Wifi must be enabled - before the next step
To get to the code, hit few clicks on the clock widget in the home screen would prompt you with a password (if the code generator matches your version of connect-it (if it isn't - see bypass admin mode workaround below), the codes would match), enter the unlock code (admin mode result from the codeGen output) and move to the apps section - you would see 'tech mode' application.
Wifi must be connected before the next step
On the tech mode application - you would have another code (tech mode result from the codeGen) enter it - and it would open a page to enable adb remote server (you must be connected to a wifi network to get it to work).
Connect to the adb using a remote shell from another device (or a laptop), to the specified IP on port 1917 (note that most mobile tethering options won't work due to networking limitations). If you don't have an accessible wifi network - see Wifi Workaround below
From adb, run the following:
to disable the application which blocks installations: pm hide com.ituran.installationblocker
Disable updates: pm hide com.ituran.systemupdateservice
Disable blocking applications while driving: pm hide com.ituran.driveusagemonitor
Tips:
While in admin mode, you can see all installed applications, and pin them to the start page of the home screen, recommend to pin Play Store app (as it is usually hidden)
Don't try to enable or enter 'Guest mode' (i tried it, and the device went into boot loop)
The codes generated are date sensitive, so either generate new ones if you won't use them in the same day, or change the device date.
Wifi Workaround : a workaround can be to install modified version of 'Remote ADB Shell' (attached) on the device, save it to your mobile phone, and push it to the device through bluetooth, this version is the same version as 'Remote ADB Shell' from the play store - only names 'Spotify' which will keep it installed on the device, after installation, run it and connect to 127.0.0.1 on port 1917 instead.
Bypass admin mode workaround : while Admin Mode enables you to view the hidden applications, in the above process, it mainly gives you the option to run the tech mode app. if the code for the admin mode isn't working for you, install 'Amaze file explorer' (attached - it was renamed to bypass the installation blocker) by pushing it through bluetooth.
You can find more details on this facebook post (not mine - but i used details from this thread to figure out how to disable the application from ADB)
Enjoy and drive safely.
mrtowel said:
For anyone interested, attached the list of whitelisted apps. a jar to generate the code to enable tech mode and how i disabled the installation blocker
For the jar - you would need to get your device Wifi MAC address (see old post from 2019 on how to enable the navigation bar), which can be retrieved from the 'אודות' section. (run the jar by running 'java -jar codeGen_jar.jar 00:11:22:33:44:55' - replace the numbers with your device mac address)
Wifi must be enabled - before the next step
To get to the code, hit few clicks on the clock widget in the home screen would prompt you with a password (if the code generator matches your version of connect-it (if it isn't - see bypass admin mode workaround below), the codes would match), enter the unlock code (admin mode result from the codeGen output) and move to the apps section - you would see 'tech mode' application.
Wifi must be connected before the next step
On the tech mode application - you would have another code (tech mode result from the codeGen) enter it - and it would open a page to enable adb remote server (you must be connected to a wifi network to get it to work).
Connect to the adb using a remote shell from another device (or a laptop), to the specified IP on port 1917 (note that most mobile tethering options won't work due to networking limitations). If you don't have an accessible wifi network - see Wifi Workaround below
From adb, run the following:
to disable the application which blocks installations: pm hide com.ituran.installationblocker
Disable updates: pm hide com.ituran.systemupdateservice
Disable blocking applications while driving: pm hide com.ituran.driveusagemonitor
Tips:
While in admin mode, you can see all installed applications, and pin them to the start page of the home screen, recommend to pin Play Store app (as it is usually hidden)
Don't try to enable or enter 'Guest mode' (i tried it, and the device went into boot loop)
The codes generated are date sensitive, so either generate new ones if you won't use them in the same day, or change the device date.
Wifi Workaround : a workaround can be to install modified version of 'Remote ADB Shell' (attached) on the device, save it to your mobile phone, and push it to the device through bluetooth, this version is the same version as 'Remote ADB Shell' from the play store - only names 'Spotify' which will keep it installed on the device, after installation, run it and connect to 127.0.0.1 on port 1917 instead.
Bypass admin mode workaround : while Admin Mode enables you to view the hidden applications, in the above process, it mainly gives you the option to run the tech mode app. if the code for the admin mode isn't working for you, install 'Amaze file explorer' (attached - it was renamed to bypass the installation blocker) by pushing it through bluetooth.
You can find more details on this facebook post (not mine - but i used details from this thread to figure out how to disable the application from ADB)
Enjoy and drive safely.
Click to expand...
Click to collapse
Does this method work with Hyundai, Mitsubishi, etc...?
Hi Mr.
mrtoweldo you have any videos explain the steps in post #13 I will be thankful if you provide me with for urgent case.
thank you dear for great job