Related
I used to be with AT&T with my 8525 and then switch to Sprint which of course doesnt work with Sprint. So i ended up getting a Samsung Rant and dont exactly like the web browser so i was wondering exactly how i would go about sharing my data connection with the 8525 via blutetooth. I tried it once and this is what i did:
1. I went to settings and clicked on connection settings under the connections tab.
2. clicked on Add a new modem connection under "My ISP"
3. When i do that it asks to enter a name for the connection and to select a modem, so i select bluetooth as modem and click next.
4. Then it asks for the device the connection is on and i select my rant and hit next
5. then it asks exactly this and has a text box under it: "Enter the number exactly as it should be dialed. include extra numbers, such as an ouside line or credit card" didnt exactly know what to put here so i just put a few randon numbers in to see what next step would be
6. then it asks for user name password and domain....dont know what to put here so i just clicked finish
7. when i try to connect to it. it says connecting and a message on my rant says entering into bluetooth data mode, and the 8525 tries to connect for a minute and says connection failed and goes back to today screen.
So if anybody could tell me in detail what info it is that i need it would be great. and also under select modem drop-down box there is a selection called "cellular line(GPRS, 3G)" is it possible i could just put the info for the data plan in there and it connect to the sprint data plan if that is possible..if it is can you tell me in detail the information u need and how to do it......THANKS
Hi there,
So I just purchased a Galaxy Note 10.1 2014 Edition and I am setting it up for first time use. When I try to log into my Google account it just takes me to the Google Account Setting page and I can't complete the process. I've tried searching the forums but I haven't been able to find any information. The steps I take are as follows:
1) Go to Settings > General > Accounts
2) Click "Add Account" > Google
3) Sign in using my Username and Password (Same one I've had for years)
4) Asks me to verify by signing in on the website. Takes me to the verification screen.
5) Get verification text on my phone. Enter the 6 digit number > Check "Don't ask me again on this device" > Click "Verify"
6) Takes me to Google Account settings page.
I have reviewed all of the information on that page and I've even gone through and verified all of my log in's and linked apps. If I back out or hit the home button I have to start all over again. I've owned many google/android products and devices and this is the first time I've had this sort of issue. Maybe someone here that's smarter than me can help?
Thanks
**EDIT**
So I actually managed to figure this out by myself. Turns out you need to add the new device to your account. It's really lame since there is nothing to inform you of this during the setup process. Anyway to help anyone else with this issue here are the steps:
1) On a computer go to "myaccount.google.com" and sign in as you would normally.
2) Click on "sign-in & Security"
3) Scroll down and click on "App Passwords"
4) Click the "Select App" drop down and choose "Other"
5) Enter a name for the device and click "Generate"
6) Write down or save this one-time password
7) On the device go to settings > Add Account and click "Google"
8) When it asks you to sign in enter your gmail address but instead of your regular password use the one-time password you just generated (without spaces) and click sign in. It should verify and create the account properly.
Hopefully this helps someone else who had trouble figuring this out.
Cheers,
I had the same problem. I solved it by turning off the 2-step verification, adding the account and then re-enabling 2-step verification.
I'm trying to find information about a multimedia system i have installed in my Skoda, the sticker on the device says CNT100, which is manufactured by CarNeTek (device page - https://www.carnetek.com.tw/products_detail/15.htm, not sure if they are the manufactures or just a reseller).
The company which sell and install it locally are not willing to share any information about the device, and of course are not willing to unlock it (to install applications from the play store, tweak configuration, etc.).
On the device there are 6 dip switches (which i couldn't figure out what they control), and no visible button (to get into recovery), i can get to the play store, and install applications - but as soon the installation is completed - they get uninstalled (there is a list of application that are not automatically uninstalled).
The launcher looks like a custom local version, there is no way to get into the settings page and the notification bar cannot be clicked (or dragged down), if i click multiple times on the menu - i get a dialog for some configuration, where i'm prompt for password (the dialog has a random number on it - which i suspect is used to generate correct password).
is anyone familiar with this device? or can suggest a way to unlock it?
(attached images of the device and the boot screen)
Hey mrtowel!
Trying to figure out that as well.
You said "if i click multiple times on the menu"
Where is this menu? possible to send a photo of that?
I'm talking about an Israeli version
Seems to be customized by [email protected]
sorry but i was wrong describing the way to get to the password dialog, on the home screen - there is a weather widget, showing the weather on the left side and the clock on the right side, multiple taps on the weather allows you to reboot the device, while multiple taps on the clock gets you to the password dialog.
I made some progress with the device - still working on getting it unlocked completely, let me know if you want more details.
mrtowel said:
Seems to be customized by [email protected]
sorry but i was wrong describing the way to get to the password dialog, on the home screen - there is a weather widget, showing the weather on the left side and the clock on the right side, multiple taps on the weather allows you to reboot the device, while multiple taps on the clock gets you to the password dialog.
I made some progress with the device - still working on getting it unlocked completely, let me know if you want more details.
Click to expand...
Click to collapse
Hey!
Just found that new to me. Pushed 6 times on the clock of the weather widget and got a prompt for the password. I receive a 9 digit number with that.
Also found that if you do the same on the temperature indication, you'll be prompt for device restart.
So that's a progress.
Anyways, I will be happy to hear from you, what progress you have made on this.
Will send you a PM.
Did someone have any success?
Hello, i have a Toyota corolla 2016 with "android multimedia" that have only 2 apps without google play or any apps, the startup screen is like yours.
i wan to unlock the system, someone know how to do that?
gtrs36 said:
Hello, i have a Toyota corolla 2016 with "android multimedia" that have only 2 apps without google play or any apps, the startup screen is like yours.
i wan to unlock the system, someone know how to do that?
Click to expand...
Click to collapse
try to get to app store (in case it is installed) through one of the installed apps using the 'rate us' option, you can also try and push a play store link through bluetooth, if it works - the android system will launch the play store app, and you'll be able to setup your account.
Once you get to the play store - download and install Googel app (https://play.google.com/store/apps/details?id=com.google.android.googlequicksearchbox&hl=en) this will let you ask google assistant to 'Open Display Settings' (in my case this option let me enable the drag down menu, where i could easily access the settings and other stuff).
hope that helps
?
Hey did you succeed?
please help
Hi
did any one of you had any success with getting into setting menu ?
i can get to google play...but as was posted before, everything i try to install immediately erase itself.....
does any one have the approved app list from ituran ?
i do believe that together we can crack this....
thanks
Thanks for the tips I've made it to download youtube! But how I can bypass the limit to install all apps from play store?
Also how can I cancel the restrictions of using apps during drive?
Thanks
Allon
Hey @mrtowel any change you can share some more details?
I tried connecting to the USB with my laptop to try doing some adb commands but it did not detect anything
I'm also wondering about the dip switch
and how to get the password bypass
Would really like to hear some more details if you can share please?
Just came here to see if can recall my steps from last time i played with the device (i kind of gave up, as it worked well with what there is, but recent update made it work really slow).
turns out there is a post on facebook (https://facebook.com/groups/gilcar/permalink/729881061134680/?comment_id=729883497801103), i'm going to try and build some utility to generate unlock codes (last time, i managed to get to an adb terminal, but i wasn't aware of the `pm hide` option to disable the installation blocker ****).
will post updates here if i get some progress
For anyone interested, attached the list of whitelisted apps. a jar to generate the code to enable tech mode and how i disabled the installation blocker
For the jar - you would need to get your device Wifi MAC address (see old post from 2019 on how to enable the navigation bar), which can be retrieved from the 'אודות' section. (run the jar by running 'java -jar codeGen_jar.jar 00:11:22:33:44:55' - replace the numbers with your device mac address)
Wifi must be enabled - before the next step
To get to the code, hit few clicks on the clock widget in the home screen would prompt you with a password (if the code generator matches your version of connect-it (if it isn't - see bypass admin mode workaround below), the codes would match), enter the unlock code (admin mode result from the codeGen output) and move to the apps section - you would see 'tech mode' application.
Wifi must be connected before the next step
On the tech mode application - you would have another code (tech mode result from the codeGen) enter it - and it would open a page to enable adb remote server (you must be connected to a wifi network to get it to work).
Connect to the adb using a remote shell from another device (or a laptop), to the specified IP on port 1917 (note that most mobile tethering options won't work due to networking limitations). If you don't have an accessible wifi network - see Wifi Workaround below
From adb, run the following:
to disable the application which blocks installations: pm hide com.ituran.installationblocker
Disable updates: pm hide com.ituran.systemupdateservice
Disable blocking applications while driving: pm hide com.ituran.driveusagemonitor
Tips:
While in admin mode, you can see all installed applications, and pin them to the start page of the home screen, recommend to pin Play Store app (as it is usually hidden)
Don't try to enable or enter 'Guest mode' (i tried it, and the device went into boot loop)
The codes generated are date sensitive, so either generate new ones if you won't use them in the same day, or change the device date.
Wifi Workaround : a workaround can be to install modified version of 'Remote ADB Shell' (attached) on the device, save it to your mobile phone, and push it to the device through bluetooth, this version is the same version as 'Remote ADB Shell' from the play store - only names 'Spotify' which will keep it installed on the device, after installation, run it and connect to 127.0.0.1 on port 1917 instead.
Bypass admin mode workaround : while Admin Mode enables you to view the hidden applications, in the above process, it mainly gives you the option to run the tech mode app. if the code for the admin mode isn't working for you, install 'Amaze file explorer' (attached - it was renamed to bypass the installation blocker) by pushing it through bluetooth.
You can find more details on this facebook post (not mine - but i used details from this thread to figure out how to disable the application from ADB)
Enjoy and drive safely.
mrtowel said:
For anyone interested, attached the list of whitelisted apps. a jar to generate the code to enable tech mode and how i disabled the installation blocker
For the jar - you would need to get your device Wifi MAC address (see old post from 2019 on how to enable the navigation bar), which can be retrieved from the 'אודות' section. (run the jar by running 'java -jar codeGen_jar.jar 00:11:22:33:44:55' - replace the numbers with your device mac address)
Wifi must be enabled - before the next step
To get to the code, hit few clicks on the clock widget in the home screen would prompt you with a password (if the code generator matches your version of connect-it (if it isn't - see bypass admin mode workaround below), the codes would match), enter the unlock code (admin mode result from the codeGen output) and move to the apps section - you would see 'tech mode' application.
Wifi must be connected before the next step
On the tech mode application - you would have another code (tech mode result from the codeGen) enter it - and it would open a page to enable adb remote server (you must be connected to a wifi network to get it to work).
Connect to the adb using a remote shell from another device (or a laptop), to the specified IP on port 1917 (note that most mobile tethering options won't work due to networking limitations). If you don't have an accessible wifi network - see Wifi Workaround below
From adb, run the following:
to disable the application which blocks installations: pm hide com.ituran.installationblocker
Disable updates: pm hide com.ituran.systemupdateservice
Disable blocking applications while driving: pm hide com.ituran.driveusagemonitor
Tips:
While in admin mode, you can see all installed applications, and pin them to the start page of the home screen, recommend to pin Play Store app (as it is usually hidden)
Don't try to enable or enter 'Guest mode' (i tried it, and the device went into boot loop)
The codes generated are date sensitive, so either generate new ones if you won't use them in the same day, or change the device date.
Wifi Workaround : a workaround can be to install modified version of 'Remote ADB Shell' (attached) on the device, save it to your mobile phone, and push it to the device through bluetooth, this version is the same version as 'Remote ADB Shell' from the play store - only names 'Spotify' which will keep it installed on the device, after installation, run it and connect to 127.0.0.1 on port 1917 instead.
Bypass admin mode workaround : while Admin Mode enables you to view the hidden applications, in the above process, it mainly gives you the option to run the tech mode app. if the code for the admin mode isn't working for you, install 'Amaze file explorer' (attached - it was renamed to bypass the installation blocker) by pushing it through bluetooth.
You can find more details on this facebook post (not mine - but i used details from this thread to figure out how to disable the application from ADB)
Enjoy and drive safely.
Click to expand...
Click to collapse
Does this method work with Hyundai, Mitsubishi, etc...?
Hi Mr.
mrtoweldo you have any videos explain the steps in post #13 I will be thankful if you provide me with for urgent case.
thank you dear for great job
I just got one of these from a friend of mine who did a factory reset on it before he gave it to me, and now it asks me to login to a previously used account. Unfortunately, he's terrible at remembering his login information, and he doesn't remember his password for the account he had on this anymore. He doesn't need it because he bought an IPad and doesn't use his google account anymore. So now it's stuck on the login screen. I've looked around and I couldn't find a way to bypass the FRP that I felt I could trust, or that seemed to apply to my device. I was wondering if anyone knew how I could do this?
Well, I didn't figure out how to get rid of the reset protection. But, I did get into the settings and was able to set up and use a guest account.
First get a SD card with an apk on it. I downloaded one from apkpure. Then when the device asks you to connect to a wireless network, check the Show advanced options box. Then in the Proxy settings drop down box, select Manual. And click on the Proxy hostname box to bring up the keyboard, and press the settings button on the keyboard that looks like a gear. From the keyboard settings menu you can click the mulit-window button on the bottom taskbar and can open two windows. Open the file manager in one of the windows. In the file manager click on your SD card and try to install the apk you put on it. When it prompts you that you need to allow Unknown sources in the settings, click on the settings button to open the settings window. (Do not check the allow Unknown sources box, if you check it, and the device resets or runs out of battery you'll have to go through this again, but when you click on the apk it won't prompt you to go to settings to allow unknown sources because they're already allowed.) Now just click on Users and switch to guest. There are some limitations to this mode, like not being able modify the wifi network (you'll have to switch back to the Owner account to change this).
I don't know if there's any way from the guest account to reset the account lock, but at least it's something.
I tried this and got as far as to the part where you said to "click the mulit-window button on the bottom taskbar."
That multi-window button is greyed out for me so I cannot click on it. LG must of patched it up or I am doing something incorrect.
Any other advise will be greatly appreciated!
It's possible it was patched out. They've been fixing little exploits with patches. This is the only way I was able to get any access to the device. All I can really recommend is to try everything. Check every menu, every option, and see if there is opening you can find to get access to the device.
Phanman0506 said:
I tried this and got as far as to the part where you said to "click the mulit-window button on the bottom taskbar."
That multi-window button is greyed out for me so I cannot click on it. LG must of patched it up or I am doing something incorrect.
Any other advise will be greatly appreciated!
Click to expand...
Click to collapse
Try this
I found a FRP bypass workaround if you are running 5.1.1 on a LG G Pad X 10.1 V930 AT&T model, not sure if all models are the same. It was FRP locked and all of the other bypass methods must have been patched. I was at the setup screen after a factory reset. I hope this helps.
1. Connect to wifi, then go back to start screen
2. Go to Accessibility > Vision > Enable Talkback
3. Go through the talkback training then draw an L to bring up the quick settings select Text to speech Settings (bottom right corner), afterwards you can disable Talkback by holding the power button and holding 2 fingers on the screen until it disables.
4. You will be in the settings app. Go to Users > Add user > User > Add user > Set up
5. You will be brought to a User setup screen select Next > It will pop up the wifi connection screen select next > You will be asked to sign into a Google account, sign into your Google account and proceed with the Google setup.
6. You will be brought to the homescreen. Go to settings > Users > And sign in as Owner.
7. Go to Settings > Factory data reset > Reset tablet. You can now factory reset and you will not be prompted to sign into a Google account.
CannGramps said:
It's possible it was patched out. They've been fixing little exploits with patches. This is the only way I was able to get any access to the device. All I can really recommend is to try everything. Check every menu, every option, and see if there is opening you can find to get access to the device.
Click to expand...
Click to collapse
Try this
I found a FRP bypass workaround if you are running 5.1.1 on a LG G Pad X 10.1 V930 AT&T model, not sure if all models are the same. It was FRP locked and all of the other bypass methods must have been patched. I was at the setup screen after a factory reset. I hope this helps.
1. Connect to wifi, then go back to start screen
2. Go to Accessibility > Vision > Enable Talkback
3. Go through the talkback training then draw an L to bring up the quick settings select Text to speech Settings (bottom right corner), afterwards you can disable Talkback by holding the power button and holding 2 fingers on the screen until it disables.
4. You will be in the settings app. Go to Users > Add user > User > Add user > Set up
5. You will be brought to a User setup screen select Next > It will pop up the wifi connection screen select next > You will be asked to sign into a Google account, sign into your Google account and proceed with the Google setup.
6. You will be brought to the homescreen. Go to settings > Users > And sign in as Owner.
7. Go to Settings > Factory data reset > Reset tablet. You can now factory reset and you will not be prompted to sign into a Google account.
i've been trying to do this thing for like 4 hours idk what to do anymore pls help
do you have a working data connection? sms too? try changing sim slot
rickymanx said:
do you have a working data connection? sms too? try changing sim slot
Click to expand...
Click to collapse
ye I do I'll try later
rickymanx said:
do you have a working data connection? sms too? try changing sim slot
Click to expand...
Click to collapse
didn't work
I have the same result, but assuming the device is already verified and secure (as stated by the closed lock picture) I think it's impossible to add a second account - or the same phone two times - to the verification request by pressing "add account and device" button.
So probably it's just a matter of bad translation in the popup, where it says check network and try again
bozinsky73 said:
I have the same result, but assuming the device is already verified and secure (as stated by the closed lock picture) I think it's impossible to add a second account - or the same phone two times - to the verification request by pressing "add account and device" button.
So probably it's just a matter of bad translation in the popup, where it says check network and try again
Click to expand...
Click to collapse
i never got to add this phone to the mi account like bind it or something idk
Akash1338 said:
i never got to add this phone to the mi account like bind it or something idk
Click to expand...
Click to collapse
Your account is already logged and you already have secure locked device.
I'm telling we both have this message because of this.
You logged to your MIUI account when you run first installation and you had to connect to MIUI server for security check
bozinsky73 said:
Your account is already logged and you already have secure locked device.
I'm telling we both have this message because of this.
You logged to your MIUI account when you run first installation and you had to connect to MIUI server for security check
Click to expand...
Click to collapse
no i didnt have to connect it
i'm having the same issue too on a redmi 9, everything is fine mi accoint and i have mobile data on but still cant add my account
Same issue here
found the fix from some guy on xiaomi.eu forum
use this vpn https://play.google.com/store/apps/details?id=com.shuttlevpn.free.proxy.gaming
Steps to fix:
1. Change Region Settings to Singapore (Settings App -> Additional Settings -> Region -> Singapore)
2. Use a Singapore VPN (Don't disconnect the VPN till the end.)
3. Log out from your Mi Account
4. Click on create an account, make sure your VPN is still connected and choose Country/Region to Singapore and create a new mi account
5. Go to Mi Unlock Status and it should work now
So it's most likely a case of incorrect translation in the popup where it reads "check network and try again."
Akash1338 said:
found the fix from some guy on xiaomi.eu forum
use this vpn https://play.google.com/store/apps/details?id=com.shuttlevpn.free.proxy.gaming
Steps to fix:
1. Change Region Settings to Singapore (Settings App -> Additional Settings -> Region -> Singapore)
2. Use a Singapore VPN (Don't disconnect the VPN till the end.)
3. Log out from your Mi Account
4. Click on create an account, make sure your VPN is still connected and choose Country/Region to Singapore and create a new mi account
5. Go to Mi Unlock Status and it should work now
Click to expand...
Click to collapse
Wait.. point n.3 means you have to log out from your account, so you can log in again but on a VPN ???
u don't log in into the same account, u create a new one using the VPN (don't turn it off during the process) on the Singapore region
So I did not get the original request.... my fault.
But the OP pictures shows that the phone is locked and secured, being logged to the account that owns the phone. So, what's the reason to add another account?
I get the same message. But did find a forum where someone said it will still work, just press the button and connect it with your PC in Fastboot with mi unlock tool.
Tried it, "you have to wait 168h..."
Seems to work, tho.