Related
Hello Guys...
This is my first work on Symphony W90. It's TWRP 2.5.0.0 For Symphony W90.
Disclaimer:
Installing Custom Recovery For your Phone Voids warranty. I am not be Responsible For any
Damage or in any matter
Requirements:
Root and MOBILE UNCLE TOOLS APP
Instructions:
1.Download Mobileuncle Tools from attachment and install
2.Download the twrp2.5.0.0.zip extract it and Put it in root of your SDCARD
3.Open Mobile uncle tools and select Recovery Update
4.Flash my recovery.img file
5.Done
6. To boot into recovery, power off the phone then hold VOLUME UP+POWER Button until the TeamWin logo is showed
Credits:
Bruno Martins & Yuweng
TeamWin for their amazing Recovery
Good news, I have also ported cwm for the device. Follow the instructions,
Instructions:
1.Download Mobileuncle Tools from 1st posts attachment and install
2.Download the cwm5.5.0.4.zip from this attachment extract it and Put it in root of your SDCARD
3.Open Mobile uncle tools and select Recovery Update
4.Flash the recovery.img file
5.Done
6.To boot into recovery, Power off the phone then hold VOLUME UP+POWER Button until the recovery comes up
Creadits:
Koushik Dutta for his ClockworkMod recovery:
This post is Intentionally left blank
any jb rom available
i am using w90 for almost 8 months and now want a JB rom for it, can you please provide one and give the instruction to flash it,
zamilhn said:
Good news, I have also ported cwm for the device. Follow the instructions,
Instructions:
1.Download Mobileuncle Tools from 1st posts attachment and install
2.Download the cwm5.5.0.4.zip from this attachment extract it and Put it in root of your SDCARD
3.Open Mobile uncle tools and select Recovery Update
4.Flash the recovery.img file
5.Done
6.To boot into recovery, Power off the phone then hold VOLUME UP+POWER Button until the recovery comes up
Creadits:
Koushik Dutta for his ClockworkMod recovery:
Click to expand...
Click to collapse
shamim0318 said:
i am using w90 for almost 8 months and now want a JB rom for it, can you please provide one and give the instruction to flash it,
Click to expand...
Click to collapse
I have one problem with your installation steps. My W90 has no volume buttons, so how to get into recovery mode?
1. Experia Rom by Jarey (2.3.5/2.3.6)
2. Gingerblaze v1.2 by Sir Bazte (2.3.5)
3. Bravia_Experia (2.3.5 / 2.3.6)
NOTE:
-- your device should have CWM RECOVERY installed and already ROOTED
-- to be able to flash/install the roms below SUCESSFULLY and to avoid BOOTLOOPS, your CWM RECOVERY should be ver. 5.0.2.8..
-- if your CMW recovery's not yet 5.0.2.8, download cwm recovery of mark then flash it..
>> https://www.dropbox.com/s/dfvth3ep9o8bu1u/CMW_recovery_by_mark.zip
how to flash CWM recovery:
1.place the zip file(CMW_recovery_by_mark.zip) to sd card
2.shutdown your device and go to recovery mode (press vol up+ power)
3.select "install zip from sdcard" then select "chose zip from sdcard"
4.locate the CMW_recovery_by_mark.zip then after selecting it press the menu key.
5.wait until installing process done "!"
6.turn off or shutdown for the next steps on flashing/installing ROM on your device
************** 1 ******************
EXPERIA ROM BY JAREY
xperia rom
>>>2.3.5 ----->> https://www.dropbox.com/s/6dz7b4vlwjmcbip/XPERIA_rom_JAREY_for_235.zip
>>> 2.3.6 ------>>>> http://www.mediafire.com/download/50kaxa914ci1yxz/2013-07-13.13.46.07.rar
how to:
1.AFTER DOWNLOADING EXTRACT THE FILES
note: it should look like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2.ON YOUR SDCARD FIND THE FOLDER NAMED CLOCKWORKMOD (THEN YOU WILL SEE THERE BACKUP FOLDER)
3.PUT THE EXTRACTED FILES ON THE BACKUP FOLDER
4.SHUT DOWN UR DEVICE AND PUT IT ON CWM RECOVERY MODE ( press vol up+ power together)
5.WIPE ALL DATA/FACTORY RESET AND WIPE CACHE PARTITION
6.GO TO BACK UP AND RESTORE
7.CHOOSE RESTORE THEN CLICK YES
8.WAIT FOR IT TILL IT SAY RESTORATION COMPLETE
9. REBOOT YOUR DEVICE
thanks to the creator of rom SHINJAREY
and SERGEY for porting the rom
one more thing in order to use the WIFI on thisROM you need to put some commands using TERMINAL EMULATOR
>>> https://www.dropbox.com/s/34y7d372k5oavpy/Terminal Emulator_1.0.52.apk
su
busybox mount /system -oremount,rw
chown 1002.1002 /system/etc/dbus.conf
chown 1014.2000 /system/etc/dhcpcd/dhcpcd-run-hooks
busybox mount /system -oremount,ro
************** 2 *****************
GINGERBLAZE V1.2 by SIR BAZTE (2.3.5)
https://www.dropbox.com/s/101vpno0wkfk94e/GingerBlaze 1.2.zip?m
>>> superuser zip
https://www.dropbox.com/s/7cvriixu7ylp4ya/Superuser-3.1.2_-efghi-signed.zip
how to flash:
- Download the rom transfer it to the root of your SD Card
- Reboot the phone in Recovery Mode (power + volume up)
-Perform a Nandroid Backup of your current Rom (Optional but highly recommended)
- wipe ALL
* wipe data/factory reset
*wipe cache partition
*wipe Dalvik-cache
- Flash zip from sdcard
- choose zip from sdcard
- After flashing this ROM,flash SuperUser
- Install zip from sdcard
- Choose zip from sdcard.
- locate superuser zip
- Then choose YES
-wait till its done then reboot..
credit to sir BAZTE
dont forget to say THANKS
*****************************************************************
BRAVIA_EXPERIA
REQUIREMENTS
*Device should have CWM recovery Installed(ver.5.0.2.8) and Rooted
>>> if not yet rooted and no cwm recovery follow this link >>>> http://forum.xda-developers.com/show....php?t=2433162
*ROM
2.3.5 >>> https://disk.yandex.com/public/?hash...Q%3D&locale=en
2.3.6 >>> www.mediafire.com/download/teb8w0l6fd6pvkt/Bravia_Xperia.2.3.6.zip
HOW TO:
1. After downloading the zip rom, put it on your SDCARD
2. turn off your device and put it into recovery mode ( volup + power)
3. Wipe Data/factory reset
4. Wipe Cache Partition
5. Install zip from Sdcard
6. choose zip from sdcard
7. Locate the rom(zip file)
8. Confirm install
9. wait till installation COMPLETE
10.. Done
MORE CUSTOM ROMS
for 2.3.5
http://forum.xda-developers.com/showthread.php?p=48511583#post48511583
for 2.3.6
http://forum.xda-developers.com/showthread.php?p=49016464#post49016464
thanks to the developer en porter..
SHINJAREY
MARK RANUDA
BANJO
MANUEL CABALLERO
BAZTE
SERGEY
BHAVIK
DONT FORGET press THANKS METER ^_^..
Thnx for the ROMs :good: .....
But i have a problem rooting my phone OT-918(without any thing) when i flash the recovery.img this error pops up
"Eboot error 16008
android partition size changed..... etc"
and the flashing progres doesnt start
i have rooted before with the same pc and the same drivers installed but after boot fail i reinstall stock rom with alcatel upgrade tool and after that cant root it cuz of the error 16008.... can any one help me plz ......thnx in advance
Bassem.Outlandish said:
Thnx for the ROMs :good: .....
But i have a problem rooting my phone OT-918(without any thing) when i flash the recovery.img this error pops up
"Eboot error 16008
android partition size changed..... etc"
and the flashing progres doesnt start
i have rooted before with the same pc and the same drivers installed but after boot fail i reinstall stock rom with alcatel upgrade tool and after that cant root it cuz of the error 16008.... can any one help me plz ......thnx in advance
Click to expand...
Click to collapse
i think u used the wrong scatter.. if you are 2.3.6,, u also used 2.3.6 scatter
about the tweaks
zatanika said:
1. Experia Rom by Jarey (2.3.5/2.3.6)
2. Gingerblaze v1.2 by Sir Bazte (2.3.5)
3. Bravia_Experia (2.3.5 / 2.3.6)
NOTE:
-- your device should have CWM RECOVERY installed and already ROOTED
-- to be able to flash/install the roms below SUCESSFULLY and to avoid BOOTLOOPS, your CWM RECOVERY should be ver. 5.0.2.8..
-- if your CMW recovery's not yet 5.0.2.8, download cwm recovery of mark then flash it..
>> https://www.dropbox.com/s/dfvth3ep9o8bu1u/CMW_recovery_by_mark.zip
how to flash CWM recovery:
1.place the zip file(CMW_recovery_by_mark.zip) to sd card
2.shutdown your device and go to recovery mode (press vol up+ power)
3.select "install zip from sdcard" then select "chose zip from sdcard"
4.locate the CMW_recovery_by_mark.zip then after selecting it press the menu key.
5.wait until installing process done "!"
6.turn off or shutdown for the next steps on flashing/installing ROM on your device
************** 1 ******************
EXPERIA ROM BY JAREY
xperia rom
>>>2.3.5 ----->> https://www.dropbox.com/s/6dz7b4vlwjmcbip/XPERIA_rom_JAREY_for_235.zip
>>> 2.3.6 ------>>>> http://www.mediafire.com/download/50kaxa914ci1yxz/2013-07-13.13.46.07.rar
how to:
1.AFTER DOWNLOADING EXTRACT THE FILES
note: it should look like this
2.ON YOUR SDCARD FIND THE FOLDER NAMED CLOCKWORKMOD (THEN YOU WILL SEE THERE BACKUP FOLDER)
3.PUT THE EXTRACTED FILES ON THE BACKUP FOLDER
4.SHUT DOWN UR DEVICE AND PUT IT ON CWM RECOVERY MODE ( press vol up+ power together)
5.WIPE ALL DATA/FACTORY RESET AND WIPE CACHE PARTITION
6.GO TO BACK UP AND RESTORE
7.CHOOSE RESTORE THEN CLICK YES
8.WAIT FOR IT TILL IT SAY RESTORATION COMPLETE
9. REBOOT YOUR DEVICE
thanks to the creator of rom SHINJAREY
and SERGEY for porting the rom
one more thing in order to use the WIFI on thisROM you need to put some commands using TERMINAL EMULATOR
>>> https://www.dropbox.com/s/34y7d372k5oavpy/Terminal Emulator_1.0.52.apk
su
busybox mount /system -oremount,rw
chown 1002.1002 /system/etc/dbus.conf
chown 1014.2000 /system/etc/dhcpcd/dhcpcd-run-hooks
busybox mount /system -oremount,ro
************** 2 *****************
GINGERBLAZE V1.2 by SIR BAZTE (2.3.5)
https://www.dropbox.com/s/101vpno0wkfk94e/GingerBlaze 1.2.zip?m
>>> superuser zip
https://www.dropbox.com/s/7cvriixu7ylp4ya/Superuser-3.1.2_-efghi-signed.zip
how to flash:
- Download the rom transfer it to the root of your SD Card
- Reboot the phone in Recovery Mode (power + volume up)
-Perform a Nandroid Backup of your current Rom (Optional but highly recommended)
- wipe ALL
* wipe data/factory reset
*wipe cache partition
*wipe Dalvik-cache
- Flash zip from sdcard
- choose zip from sdcard
- After flashing this ROM,flash SuperUser
- Install zip from sdcard
- Choose zip from sdcard.
- locate superuser zip
- Then choose YES
-wait till its done then reboot..
credit to sir BAZTE
dont forget to say THANKS
*****************************************************************
BRAVIA_EXPERIA
REQUIREMENTS
*Device should have CWM recovery Installed(ver.5.0.2.8) and Rooted
>>> if not yet rooted and no cwm recovery follow this link >>>> http://forum.xda-developers.com/show....php?t=2433162
*ROM
2.3.5 >>> https://disk.yandex.com/public/?hash...Q%3D&locale=en
2.3.6 >>> www.mediafire.com/download/teb8w0l6fd6pvkt/Bravia_Xperia.2.3.6.zip
HOW TO:
1. After downloading the zip rom, put it on your SDCARD
2. turn off your device and put it into recovery mode ( volup + power)
3. Wipe Data/factory reset
4. Wipe Cache Partition
5. Install zip from Sdcard
6. choose zip from sdcard
7. Locate the rom(zip file)
8. Confirm install
9. wait till installation COMPLETE
10.. Done
thanks again to SERGEY( who ported the rom to 2.3.5)
and SHINJAREY for the ROM
DONT FORGET press THANKS METER ^_^..
Click to expand...
Click to collapse
how about the tweaks?
---------- Post added at 12:53 PM ---------- Previous post was at 12:48 PM ----------
how can i flash the tweaks in bravia_xperia? is there's a tutorial?
[/COLOR]how can i flash the tweaks in bravia_xperia? is there's a tutorial?[/QUOTE]
what tweaks u were reffering sir?
Does this Roms work for both 918D and 918N?
harrycaine said:
Does this Roms work for both 918D and 918N?
Click to expand...
Click to collapse
sir it says 2.3.5 and 2.3.6.. so it means yes..
Thanks you
wos82c said:
Thanks you
Click to expand...
Click to collapse
welcome... ^_^
how bout me in my custom recovery no install.zip menu? i had only update.zip so how can i install cwm in my alcatel 918n please help me
zatanika said:
sir it says 2.3.5 and 2.3.6.. so it means yes..
Click to expand...
Click to collapse
918D & 918N have more differences than the android version, i.e. base band
Zip verification failed
WHEN TRYING TO FLASH "CMW_recovery_by_mark"
IT SAYS
E :WRONG DIGEST
META-INF/COM/GOOGLE/ANDROID/UPDATER-SCRIPT
E:VERIFICATION FAILED
ZIP VERIFICATION FAILED
ZIP ISN'T SIGNED CORRECTLY
INSTALLATION ABORTED
HOW TO PROCEED ?
im having bootloops with bravia experia rom, i have followed the steps in order. tihs is not my firts time to install custom rom with this phone. can somebody help me thanx
Android
Android
efhra052187 said:
how bout me in my custom recovery no install.zip menu? i had only update.zip so how can i install cwm in my alcatel 918n please help me
Click to expand...
Click to collapse
go to this thread sir before flashing rom
http://forum.xda-developers.com/showthread.php?t=2433162
ambroochizafer said:
WHEN TRYING TO FLASH "CMW_recovery_by_mark"
IT SAYS
E :WRONG DIGEST
META-INF/COM/GOOGLE/ANDROID/UPDATER-SCRIPT
E:VERIFICATION FAILED
ZIP VERIFICATION FAILED
ZIP ISN'T SIGNED CORRECTLY
INSTALLATION ABORTED
HOW TO PROCEED ?
Click to expand...
Click to collapse
dowload again sir mark cwm i updated it,, reflashed it again.. ^_^
jheb0y said:
im having bootloops with bravia experia rom, i have followed the steps in order. tihs is not my firts time to install custom rom with this phone. can somebody help me thanx
Click to expand...
Click to collapse
sir are you sure the rom you used is same as your device version? ( 2.3.6 custom roms for 2.3.6 device)
is your cwm recovery version is 5.0.2.8
make sure that you meet the requirements above then try to reflash again the rom.. ^_^
Custom Roms for 2.3.5 ONLY
FOR 2.3.5 ONLY
REQUIREMENTS:
your device should have
--> UPDATED cwm recovery installed / ver 5.0.2.8 (mark ranudas recovery or sergey recovery )
--> rooted device
failed to accomplished requirements above might bricked your device
MARK RANUDA
* ICS 2.3.5v1
http://www.mediafire.com/download/kst140gyoglh2nn/ICS2.3.5v1.zip
requirements:
1.Rooted
2.Custom Recovery Installed
3.SD card Partitioned ( Fat32 & Ext2 )
how to:
1.Copy ICS2.3.5v1.zip to sd card
2.Reboot to Custom recovery
3.Wipe data,dalvik cache and sd ext
4.Then Flash it.
5.wait fo the installation complete ..REBOOT.. done
Flashable Background
--}BG1 -- http://www.mediafire.com/download/g23tke21zerjvqp/BG1.zip
--}BG2 -- http://www.mediafire.com/download/mr8o9dl5mxzd9gf/BG2.zip
--}BG3 -- http://www.mediafire.com/download/ih2lnfgmhbegbh8/BG3.zip
how to:
go to cwm recovery
install zip from sdcard
choose the bg you wanted
flash it
wait till complete...done
FC Issue
MTK CPU control license verification removal
-use lucky patcher
-run it then click CPU control
-Open menu of patches
-Remove license verification
-Auto modesnext
put checks on Auto mode andt other patches(Extreme mode)
Click Aplly..done
* ICS 2.3.5v2
http://www.symbianize.com/showthread.php?t=889483
how to:
1.after downloading place the Copy of ICS2.3.5v2.zip to sd card
2.Reboot to Custom recovery
3.Wipe data,dalvik cache and sd ext
4.Flash it..
5.wait fo the installation complete ..REBOOT.. done
LINK TO ENABLE INT2EXT:
http://www.mediafire.com/download/0608ou5xb6unexy/Enable-INT2EXT+.zip
* JD_V3_odex_rom
http://www.mediafire.com/download/ctot5bnh8nayjta/Jellydroid_V3_odex_rom_by_mark-2.3.5.zip
how to:
1. Download & Place Jellydroid_v3_odex_by_mark.zip rom in your SD Card
2. TURN OFF ur DEVICE & Go to Recovery Mode.
3.Install Zip From SD > choose "Jellydroid_v3_odex_by_mark.zip" & Yes.
4. Wait for the installation process finished...DONE
SHINJAREY
* BRAVIA_EXPERIA V4
http://www.mediafire.com/download/rmvdka0vmbvuamr/Bravia_Xperia..v4-2.3.5-signed.zip
how to:
1.DownLoad bravia xperia v4 en put it on your SDcard
2.TURN OF YOUR DEVICE GO TO CWM RECOVERY (press together vol up+power)
3.WIPE DATA FACTORY RESET
4.WIPE ALL CACHE PARTITION
5.GO TO ADVANCE & WIPE DALVIK CACHE/BATTERY STATS
6.INSTALL ZIP SD CARD
7.CHOOSE.ZIP
8.CHOOSE BRAVIA_XPERIA BY-JAREY.ZIP
9.OK (installation)
10 wait for installation complete.. REBOOT...done
* GINGERBEAN V2
http://www.mediafire.com/download/6djqobsxphlwbf1/GingerbeanV2+by-jarey-2.3.5-signed.zip
how to:
1.DL gingerbean
2.PUT IT IN YOUR ROOT OF SD CARD...
3.GO TO CWM RECOVERY
4.WIPE DATA FACTORY RESET..
5.WIPE ALL CACHE PARTITION AND DALVIK CACHE/BATTERY STATS
6.INSTALL ZIP SD CARD
7.CHOOSE.ZIP
8.CHOOSE GINGERBEAN BY-JAREY.ZIP
9.OK (installation)
10 wait for installation complete....11.REBOOT....done
*ZHYDROIDv1
http://www.symbianize.com/showthread.php?t=854024
how to:
1.Alcatel OT 918M/N/D 2.3.5
2.Must be Rooted
3.Custom Recovery installed
4.Download the zip put it on your sd card
5.Already have an SD ext or Double Partition Fat32/Ext2
6.Do a full wipe,dalvic cache,data,sd ext
7.Then flash it..^^
8.after installation complete.. REBOOT
ported roms by SIR BAZTE
https://www.facebook.com/groups/237333346380882/permalink/466966280084253
or
*Lenovo Fujian
http://www.mediafire.com/download.php?m3phbyo7317bock
note: to change chinese language to default english here how..
Before you flash the zip file edit the build prop inside Look for the line(see below)
ro.product.locale.language=zh
change "zh" to "en"
save and apply the changes
put it back inside the zip file
flash it
*Lenovo P70
http://www.mediafire.com/?ljphuxa2n5hbuzx
*Micromax A75
http://www.mediafire.com/download.php?12dwlyh4o2irci5 HOW TO:
how to flash lenovo fujijan / lenovo p7o / micromax a75
*Wipe data/factory reset
*Wipe dalvik cache
*Install zip from sd
*Choose zip
*Locate the zip file ,flash it
*wait till installation complete...Reboot
BANJO
YONIP CYANOGEN MOD
https://www.facebook.com/notes/alca...alcatel-918n-235-by-banjo0917/475287262585488
YONIP ROM
https://www.facebook.com/groups/237333346380882/permalink/468154073298807
HOW TO INSTALL:
1. Install YONIP Alcatel 918N CM-ROM via recovery;
2. Reboot to System and let system initialized;
3. Reboot to Recovery;
4. Install Market Download FIX;
5. Reboot...ENJOY
SERGEY MELNIKOV
*2.3.6 over 2.3.5
http://yadi.sk/d/p2vnN_4X10x21
*2.3.6 over 2.3.5 tiny
http://yadi.sk/d/cB5bW0wl12BKR
how to:
put it on ur sdcard
then flash it
wait till intallationcomplete...
REBOOT
ANDREAD 3.2 (2.3.5)
https://www.facebook.com/notes/alcatel-ot-918n-users/andread-32-for-alcatel-918n-235/396630220451193
or
http://www.4shared.com/zip/8hLXUjQb/Andread_32_i2e.html
howto install:
1) microsd must be partition before installation (first partition primary FAT32, second partition primary EXT2)
2) I suggest to do a cleaning install. after installation of this rom you must install all into your device.
DO NOT USE BACKUP
3) wait until phone is on than reboot again phone
LEWA 2.3.5
http://turbobit.net/1wtsokyk0tuq.html
how to:
1. Download ROM & extract it using WinRar in PC.
2. copy that folder to your Memory Crad in below Location.
Memory Card > clockworkmod > backup > ***Copy Here***
3. Reboot your Phone in Clockworkmod Recovery.
4. Wipe Data... Wipe Cache ... Wipe Dalvik Cache.
5. Go to Backup & Restore > Restore.
6. Select "LeWa_ROM_2.3.6_Bhavik_Barai" & Restore It.
7. Reboot your Device & Enjoy
>>> md5 MISMATCH????????????
go to root explorer "clockworkmod/backup/file"
look for nandroid.md5
longpress then "open in text editor"
erase it content then save it..
go to cwm recovery then restore it..
reboot
or
.......If the above steps failed, do the procedure below
go to root explorer "clockworkmod/backup/file"
look for nandroid.md5
longpress then "open in text editor"
deleted the file and create a new file with the same name
save it then restore tru cwm recovery
reboot
credits to all DEVELOPER and PORTER
Alcatel 4030X
it work with Alcatel onetouch spop 4030x??:fingers-crossed:
Dominik940 said:
it work with Alcatel onetouch spop 4030x??:fingers-crossed:
Click to expand...
Click to collapse
no sir .. for alcatel 918 only
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Specifications:
Xiaomi Hongmi 1S Red Rice MSM8228 Quad Core 1.6GHz 1G Ram 8G Rom 4.7 Inch HD Screen 3G WCDMA
- Qualcomm Snapdragon MSM8228 Quad Core 1.6GHz
- 4.7 inch 1280 * 720 Pixel HD IPS Screen
- 1GB RAM + 8GB ROM
- 8.0MP Rear Camera + 1.6MP Front Camera
- Support 3G WCDMA Network, GPS, WIFI, Bluetooth, etc
Tested With Windows 7
1. Restore Stock Rom with MiFlash
2. Root
3. Update Ota Stable (JHCCNBD24) Rom And Ota Stable (JHCCNBF31 Rom
4. install Touch TWRP Recovery 2.7.1 And Touch CWM Recovery v6.0.3.6
5. WSM Manager and XExtStorage
6. Extra
7. Cyanogenmod 11 Rom
8. Xposed installer and modules
9. Full Backup TWRP Recovery / Backup and Restore only apps +data/ Backup and Restore only IMEI
10. Anti -Theft
Tread updated 16/11/2014
--------------------------------------------------------------------------------------------------------------------------------------------------------
I am not responsible for any damage on your phone !
---------------------------------------------------------------------------------------------------------------------------------------------------------
1. Restore Stock Multi Lang Miui v5 Rom (JHCCNBD23) 531 Mb With MiFlash
Link: http://www.mediafire.com/download/ex1ggyxmrctr99x/armani_images_JHCCNBD23.0_4.3_340628b41f.tgz
MiFlash
Link: http://www.mediafire.com/?v8k67vsb9a62xks
Unzip JHCCNBD23 Rom
Install Miflash ,Connect phone in Fastboot to pc
Run as Administrator MiFlash klik Refresh you will see your phone is connected (See picture) and Navigate to armani_images_JHCCNBD23.0_4.3 Folder and Flash Phone.
Takes about 2 to 3 min.
----------------------------------------------------------------------------------------------------------------------------------------------------------
2. Root
Download the RootHM1SW.zip and install with update app.
Link: http://www.mediafire.com/download/bxei26g0645v6ru/Root+HM1SW.zip
----------------------------------------------------------------------------------------------------------------------------------------------------------
3. Update OTA
Update Ota Multi Lang stable (JHCCNBD24)365 Mb
Update Ota Multi Lang Stable (JHCCNBF31) 410 Mb
backup your phone before installing the update
Download and install Rom with update app or Fresh install
(JHCCNBD24) Link: http://www.mediafire.com/download/b...ani_mam_JHCCNBD24.0_24.0.0_41880f3302_4.3.zip
(JHCCNBF31) Link: https://www.mediafire.com/?60p28a8g6678jw9
On (JHCCNBF31) Backup app is Missing.
Delete With Root Explorer in System/app The ( Backup.app only) And and copy the downloaded Backup app in System/app and Reboot Phone.
Backup app Link: http://www.mediafire.com/download/jpuylktd11azdy5/Backup.apk
it is best not to remove the SDCard from the phone
----------------------------------------------------------------------------------------------------------------------------------------------------------
4. TWRP Recovery 2.7.1 ( See Picture )
Thanks to juliusssss !!
Download Tool For Fasboot on (Thread)
Go in Fastboot with phone connect to pc
unzip Cambio_Recovery_Redmi1S_TWRP_juliusssss_MiRecovery_20140705.7z
Run (administator) the Cambiar_Recoverys_Redmi1S.bat and select
Number 1. = (TWRP Touch Recovery) Press enter.
Number 2. = (TWRP Stock Recovey)
After flashing Recovery discconect and Reboot phone.
Translated Note of Thread:
If you are an official rom, we can certainly be installed / system / etc / install-recovery.sh file that cause us to re-install the official Mirecovery the RM restart. For this we need to install first to prevent root delete the file with root explorer.
Thread: http://foro.miui.es/index.php?topic=8614.0
----------------------------------------------------------------------------------------------------------------------------------------------------------
CWM Recovery v6.0.3.6 ( See Picture )
Thanks to brainfog !!
if you have already flashed TWRP Recovery and want to flash CWM Recovery
Download signed_cwm_update.zip to SDCard
Install with update app or
in Recovery install signed_cwm_update.zip
With stock Recovery:
download signed_cwm_update.zip to pc Rename signed_cwm_update.zip to update.zip
Connect phone to pc and copy update.zip to root of Internal storage go with phone in recovery and select Install update.zip to System.
Source Thread:https://techpunked.wordpress.com/2014/07/08/cwm-touch-recovery-v6-0-3-6-for-redmi-1s-wcdma/
CWM Recovery Link: https://mega.co.nz/#!RQkVAIDB!OWecFNTcKm9vufDhk0vGX9K3vsL10Djf9YuCFKS7Wg0
Restore Stock Recovery Link: https://mega.co.nz/#!EElW0QIZ!3frRQB8iEvjTpuf6XTBtbA5SxCo0FEBvLVSqiWZQaXY
Boot into recovery is faster with CWM Recovery v6.0.3.6
----------------------------------------------------------------------------------------------------------------------------------------------------------
5. WSM Manager
Reboot,EXxtStorage options and much more....
Download on thread
Install WSM manager
Root Permission
install Xposed
The Phone will Restart.
Thread: http://forum.xda-developers.com/showthread.php?t=2481178
----------------------------------------------------------------------------------------------------------------------------------------------------------
XExtStorage
install XextStorage
open XExtStorage and set
Primary SDCard 1
Secondary SDCard 0
(see picture)
Enable XExtStorage in WSM manager
Copy Android Folder from internal storage to SDCard !
Reboot Phone.
Link: http://www.mediafire.com/download/jlj4c48t1c4c2ay/XExtStorage.apk
----------------------------------------------------------------------------------------------------------------------------------------------------------
6. Google Camera
From Thread: http://forum.xda-developers.com/showthread.php?t=2341080
Link : https://www.dropbox.com/s/l2at3wzy8t5st3m/Gallery.apk
----------------------------------------------------------------------------------------------------------------------------------------------------------
Android L Keyboard
Just install
Link: http://www.apkmirror.com/apk/google-inc/google-keyboard/google-keyboard-4-0-21173-1568296-apk/
-----------------------------------------------------------------------------------------------------------------------------------------------------------
YouTube 4.4.11
Tread: http://forum.xda-developers.com/showthread.php?t=1529715
----------------------------------------------------------------------------------------------------------------------------------------------------------
Lenovo Calendar
Link : https://www.mediafire.com/?2btogoz6dhrgl1z
----------------------------------------------------------------------------------------------------------------------------------------------------------
YouTube Downloader v4.3
Tread: http://forum.xda-developers.com/showthread.php?t=2137743
-----------------------------------------------------------------------------------------------------------------------------------------------------------
7. Stable Multi Lang Cyanogenmod 11 R3 Rom 230Mb ******
Thanks to , Kra1o5,fefifofum,Tarun93, MAITREYA
Rom Pictures
Link: https://mega.co.nz/#F!AItk3C4J!ED70gSDJG38YOMEAzxjE3A
Install in TWRP Or CWM Recovery
Wipe data,cache and dalvik cache.
Flash Rom
Flash GApps.zip
Thread http://thebroodle.com/xiaomi/redmi-1s/cm11-stable-xiaomi-redmi-1s-android-4-4-4-kitkat-bugless-rom/
Link Rom https://s.basketbuild.com/filedl/de...i/armani/cm-11-20140920-UNOFFICIAL-armani.zip
Download GApps.zip from link on Thread
How to enable Developer settings
1. Select settings
2. Select about phone
3. tab 7 times on build-Number
----------------------------------------------------------------------------------------------------------------------------------------------------------
8. Xposed Installer
Install Xposed Installer
And you can install Modules to Customize your phone
Link: http://repo.xposed.info
Modules ( Tweaks )
-Download2SD Download location on Sdcard ( Tested )
http://dl-count.xposed.info/modules/..._v9_acf08f.apk
-NoSafeVolumeWarning No Warning Volume( Not Tested )
http://dl.xposed.info/modules/com.py...6_485a40_0.apk
-SMS Xposed Wake on sms and Flash Flashlight ( Not Tested )
http://dl-xda.xposed.info/modules/co...v11_85cb23.apk
-AlternateAppPicker Select Default app ( Not Tested )
http://dl-xda.xposed.info/modules/pk..._v3_6c8c0f.apk
Extra
-Smart Network Network options ( Not Tested )
http://dl-xda.xposed.info/modules/ma...123_4c575d.apk
-Gravitybox customize phone: Physical Go to sleep button, quickunlock,Torch and much More settings ( Tested )
http://dl.xposed.info/modules/com.ce...111_70a4b6.apk
-XCoolDroid v1.0 Resize of your Google keyboard ( Not Tested )
http://forum.xda-developers.com/atta...0&d=1410005819
-Chromepie Fast settings module for Google Chrome( Not Tested )
http://dl.xposed.info/modules/com.jt..._v2_2c7b0d.apk
-Advanced Power Menu Soft Reboot option and more ( Tested )
http://dl-xda.xposed.info/modules/hk...v33_2b5ca5.apk
-Battery Thermeing HDPI Statusbar Battery ( Not Tested )
http://forum.xda-developers.com/xpos...meing-t2407727
--------------------------------------------------------------------------------------------------------------------------------------------------------
9. Full Backup Rom
1. With CWM Recovery
Boot in Recovery With a Rebooter app
Select in CWM Recovery backup and restore
Select Backup
The Easyt Way
This step only once
Install Rom Manager
Select Recovery Setup
Select Below (Clockworkmode Recovery)
Select below ( Device Not Listed Above)
Select 3.x+
Select OK
Then
Select Backup Current Rom
Location Backup Folder
sdcard1/clockworkmod
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Backup only apps+data to restore in a different Rom
Download Helium Premium
select apps (not system apps)
Disable (Small Backup)
select backup
select Save on sdcard
Location Backup Folder sdcard/carbon Folderr
Link : http://www33.zippyshare.com/d/122513...PK4Fun.com.apk
Helium Tool Pc/Mac/Linux
Link: https://www.clockworkmod.com/carbon
Resore only apps+data
Install and open Helium Premium
Select Restore backup
Select apps
Select Restore
----------------------------------------------------------------------------------------------------------------------------------------------------------
Backup IMEI
Install Mobileuncle MTK Tool
Select IMEI Backup Restore (MTK)
Select Backup IMEI to SDCARD2(MTK)
Location - SDCARD/IMEI.bak
Restore IMEI in a different Rom
Copy the IMEI.bak to SDCARD
Select IMEI Backup Restore (MTK)
Select Restore IMEI to SDCARD2(MTK)
Select Ok
Reboot Phone Ok
Link: https://play.google.com/store/apps/d...euncle.toolbox
---------------------------------------------------------------------------------------------------------------
Easy Phone Tunes
Synchronize music from Itunes to Internal /Sdcard on phone
Install Easy phone Tunes from Playstore
Install SetupEasyPhoneTunes Windows
or
Install SetupEasyPhoneTunes Mac
Connect PC/MAC - Phone (MTP)
Select Settings
Select Storage
Select
App: https://play.google.com/store/apps/d...es.android.app
Windows
http://f0da7f376559b2016640-1cc6f615...E]oneTunes.exe
----------------------------------------------------------------------------------------------------------------------------------------------------------
10. Anti -Theft
Thanks to leducbao
Theftie Find My Phone
As Root System app
Download Theftie to phone
Go with Root Explorer To system/app
Mount R/W
Copy Theftie.apk to The folder
Set root premision to "0644"
Mount R/W
Reboot Phone
Enable Theftie in Xposed
If you install Theftie as system app can then secured to restore Settings -factory Reset - lock, wipe, sdcard remotely.
Link: http://forum.xda-developers.com/andr...phone-t2802092
Instuctions: http://www.theftie.net/manual
Find your phone: http://www.theftie.net
----------------------------------------------------------------------------------------------------------------------------------------------------------
Easy Phone Tunes
Synchronize music from Itunes to Internal /Sdcard on phone
Install Easy phone Tunes from Playstore
Install SetupEasyPhoneTunes Windows
or
Install SetupEasyPhoneTunes Mac
Connect PC/MAC - Phone (MTP)
Select Settings
Select Storage
Select
App: https://play.google.com/store/apps/details?id=com.easyphonetunes.android.app
Windows
http://f0da7f376559b2016640-1cc6f61...a.r34.cf3.rackcdn.com/SetupEasyPhoneTunes.exe
@77777777777777
You have done amazing job here Thank!!
I'm using stock Rom Stable 24.0.0 Rom + Rooted running beautiful!!..
Now I can't wait for custom Rom for our Redmi 1S:good:
Thanks !
Sent from my HM 1SW using XDA Premium 4 mobile app
On miui.su available version 31.0 (JHCCNBF31.0)
---------- Post added at 12:25 AM ---------- Previous post was at 12:07 AM ----------
In title error: right name "Redmi 1S", not "Redmi S1"
Thanks overlooked !
Sent from my HM 1SW using XDA Premium 4 mobile app
Official TWRP recovery 2.7.1.0
77777777777777 said:
4. TWRP Recovery 2.7.1 ( See Picture )
Thanks to juliusssss !!
Go in Fastboot with phone connect to pc
unzip Cambio_Recovery_Redmi1S_TWRP_juliusssss_MiRecovery _20140705.7z
Run (administator) the Cambiar_Recoverys_Redmi1S.bat and select
Number 1. = (TWRP Touch Recovery) Press enter.
Number 2. = (TWRP Stock Recovey)
After flashing Recovery discconect and Reboot phone.
Tread: http://foro.miui.es/index.php?topic=8614.0
Link https://www.copy.com/s/0n8u9amfhdG4/...ry_20140705.7z
Click to expand...
Click to collapse
Also TWRP recovery 2.7.1.0 Official by Dev (Dees_Troy) and ( DarkNightmare)
http://en.miui.com/thread-29291-1-1.html
Anybody successfully install it?
Redmi 1S Fastboot Stock Rom / Unbrick
Hi every one following link contains all stock version of redmi 1s Rom choose the latest rom AND use MiFlash tool.
ROM Link en.miui.com/thread-21812-1-1.html
MiFlash Tool link bigota.d.miui.com/tools/MiPhone20140509.exe
please use http:\\ before the above links as xda not allowing to post outside links and roms are not surely indian edition. but english language option comes in boot
Nice share...
just subscribe this thread
Redmi 1S Fastboot Stock Rom / Unbrick
Use Latest redmi 1s Rom link is http://bigota.d.miui.com/JHCCNBF36.0/armani_images_JHCCNBF36.0_4.3_cn_5360473a1c.tgz
No Need of Using OTA Roms in between till the latest one arrives
and the following link contains many Recovery and Fastboot rom
http://en.miui.com/forum.php?mod=viewthread&tid=21812&highlight=fastboot+redmi+1s
77777777777777 said:
1. Restore Stock Rom with MiFlash
2. Root
3. Update Ota Stable (JHCCNBD24) Rom And Ota Stable (JHCCNBF31 Rom
4. install Touch TWRP Recovery 2.7.1 And Touch CWM Recovery v6.0.3.6
5. WSM Manager and XExtStorage
6. Extra
7. How to Manual flash Recovery.img (ADB-Fastboot for Windows) [/B]
Tread updated 04/09/2014
1. Restore Stock Multi Lang Miui v5 Rom (JHCCNBD23) 531 Mb With MiFlash
Link: http://www.mediafire.com/download/ex1ggyxmrctr99x/armani_images_JHCCNBD23.0_4.3_340628b41f.tgz
MiFlash
Link: http://www.mediafire.com/?v8k67vsb9a62xks
Unzip JHCCNBD23 Rom
Install Miflash ,Connect phone in Fastboot to pc
Run as Administrator MiFlash klik Refresh you will see your phone is connected (See picture) and Navigate to armani_images_JHCCNBD23.0_4.3 Folder and Flash Phone.
Takes about 2 to 3 min.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
2. Root
Download the RootHM1SW.zip and install with update app.
Link: http://www.mediafire.com/download/bxei26g0645v6ru/Root+HM1SW.zip
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
3. Update Ota Multi Lang stable (JHCCNBD24) 365 Mb
Update Ota Multi Lang Stable (JHCCNBF31) 410 Mb
backup your phone before installing the update
Download and install Rom with update app or Fresh install
(JHCCNBD24) Link: http://www.mediafire.com/download/b...ani_mam_JHCCNBD24.0_24.0.0_41880f3302_4.3.zip
(JHCCNBF31) Link: https://www.mediafire.com/?60p28a8g6678jw9
On (JHCCNBF31) Backup app is Missing.
Delete With Root Explorer in System/app The ( Backup.app only) And and copy the downloaded Backup app in System/app and Reboot Phone.
Backup app Link: http://www.mediafire.com/download/jpuylktd11azdy5/Backup.apk
it is best not to remove the SDCard from the phone
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
4. TWRP Recovery 2.7.1 ( See Picture )
Thanks to juliusssss !!
Download Tool For Fasboot on (Thread)
Go in Fastboot with phone connect to pc
unzip Cambio_Recovery_Redmi1S_TWRP_juliusssss_MiRecovery_20140705.7z
Run (administator) the Cambiar_Recoverys_Redmi1S.bat and select
Number 1. = (TWRP Touch Recovery) Press enter.
Number 2. = (TWRP Stock Recovey)
After flashing Recovery discconect and Reboot phone.
Translated Note of Thread:
If you are an official rom, we can certainly be installed / system / etc / install-recovery.sh file that cause us to re-install the official Mirecovery the RM restart. For this we need to install first to prevent root delete the file with root explorer.
Thread: http://foro.miui.es/index.php?topic=8614.0
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
CWM Recovery v6.0.3.6 ( See Picture )
Thanks to brainfog !!
if you have already flashed TWRP Recovery and want to flash CWM Recovery
Download signed_cwm_update.zip to SDCard
Install with update app or
in Recovery install signed_cwm_update.zip
With stock Recovery:
download signed_cwm_update.zip to pc Rename signed_cwm_update.zip to update.zip
Connect phone to pc and copy update.zip to root of Internal storage go with phone in recovery and select Install update.zip to System.
Source Thread:https://techpunked.wordpress.com/2014/07/08/cwm-touch-recovery-v6-0-3-6-for-redmi-1s-wcdma/
CWM Recovery Link: https://mega.co.nz/#!RQkVAIDB!OWecFNTcKm9vufDhk0vGX9K3vsL10Djf9YuCFKS7Wg0
Restore Stock Recovery Link: https://mega.co.nz/#!EElW0QIZ!3frRQB8iEvjTpuf6XTBtbA5SxCo0FEBvLVSqiWZQaXY
Boot into recovery is faster with CWM Recovery v6.0.3.6
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
5. WSM Manager
Reboot,EXxtStorage options and much more....
Download on thread
Install WSM manager
Root Permission
install Xposed
The Phone will Restart.
Thread: http://forum.xda-developers.com/showthread.php?t=2481178
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
XExtStorage
install XextStorage
open XExtStorage and set
Primary SDCard1
Secondary SDCard0
(see picture)
Enable XExtStorage in WSM manager
Copy Android Folder from internal storage to SDCard !
Reboot Phone.
Link: http://www.mediafire.com/download/jlj4c48t1c4c2ay/XExtStorage.apk
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-----------------
6. Google Camera
From Thread: http://forum.xda-developers.com/showthread.php?t=2341080
Link : https://www.dropbox.com/s/l2at3wzy8t5st3m/Gallery.apk
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Google Keyboard (AOSP) 4.4
All language settings
Just install
Do NOT copy it in system/app !
if you want you can remove the stock keyboard !
backup app always recommended !
Link: http://www.mediafire.com/?2qer4ys05hfpnyu
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
YouTube 4.4.11
Tread: http://forum.xda-developers.com/showthread.php?t=1529715
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
YouTube Downloader v4.3
Tread: http://forum.xda-developers.com/showthread.php?t=2137743
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
7. How to Manual flash Recovery.img (ADB-Fastboot for Windows)
Create a folder in
Hard-drive C: (folder-name)
----Android-----
Copy the recovery.img file in C: Android folder
Connect Phone in Fastboot to pc
Option 1.
Open as Administrator Command promp :
(Windows 7 ,Open the Start Menu, type cmd in the search box and press Enter)
Option 2.
Run as an Administrator the START.cmd file
Type:
cd \Android
Thrust Enter
c:\Android>fastboot flash recovery recovery.img
Thrust Enter
Manual reboot phone
Link: http://www.mediafire.com/?8c5r3xmh71i6k62
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Click to expand...
Click to collapse
All about Redmi 1s rooting, custom rom installation, upgrading to kitkat
Mokee ROM For Xiaomi Redmi 1S - Android
4.4.4 Indian version
http://forum.xda-developers.com/android/general/mokee-rom-xiaomi-redmi-1s-android-4-4-4-t2886275
custom cyanogenmod android 4.4 ROM for
redmi 1S with preinstalled xposed framework
http://forum.xda-developers.com/android/general/custom-cyanogenmod-android-4-4-rom-t2888971
Custom rom xiaomi redmi 1s indian
version
http://forum.xda-developers.com/android/general/custom-rom-xiaomi-redmi-1s-indian-t2882604
Unbrick Redmi 1s unbrick (indian version)
rooting, installing CWM & custom ROM guide
http://forum.xda-developers.com/android/general/redmi-1sindian-version-unbricking-t2882369
Root redmi 1S (Indian version) with
SuperSU installed (No native root method)
http://forum.xda-developers.com/android/general/root-redmi-1s-indian-version-supersu-t2881416
Handy topic. But i would advice people not to install TWRP or CWM but instead just load it once needed with fastboot.
Because it might still have some problems and once it goes wrong, your device will be bricked.
I am not sure how far the development is for armani regarding TWRP and CWM, I've been using the beta version of CWM without problems howsoever.
NiTrOwow said:
Handy topic. But i would advice people not to install TWRP or CWM but instead just load it once needed with fastboot.
Because it might still have some problems and once it goes wrong, your device will be bricked.
I am not sure how far the development is for armani regarding TWRP and CWM, I've been using the beta version of CWM without problems howsoever.
Click to expand...
Click to collapse
i agreed. I almost bricked my armani, using twrp trying to update mokee n then it failed. reverting back to stock I got my touchscreen not working:silly: now im happy with stock rooted armani with all chinese bloatware removed
Introduction :
Hey Guys so we successfully extracted the 4.4.2 stock ROM, Rooted it and Uploaded!
1st Let's Begin with How To ROOT and Flash Recovery on your XOLO Q1010i (works on both JB & KK)
Downloads:
-MTK USB Drivers (HERE)
- MT6582 Scatter File (HERE)
-NEW CTR Recovery by Chirag Jain for Q1010i Only (HERE)
-SP Flash Tools v3.1352.01 (5.1352.01) (HERE)
-SuperSu Zip (Download and Move it to your SD Card) (HERE)
Instructions:
PS - Place all Downloaded Files in the same Place for Easy Access (See Attachment For Screenshots)
Step 1: Install The MTK USB Drivers on Your PC by Clicking on Install.bat
If it Doesn't work See THIS
Step 2: Open SP Flash Tools folder and click on flash_tool.exe (See Attachment For Screenshots)
Step 3: In The Flash Tool window Click on Scatter-Loading, Select MT6582_Android_Scatter.txt and Press Open (See Attachment For Screenshots)
Step 4: In Flash Tool Window Check (Tick) RECOVERY and Click on the Blank Green Space Beside It and select Recovery.img (See Attachment For Screenshots)
Step 5: Press on Download Button at Top, Switch Off Your Device and Connect it to your PC (See Attachment For Screenshots)
Step 6: The Below Bar will Change it's Color Red Then Yellow and Finally show a Download OK Dialog Box (See Attachment For Screenshots)
Step 7: Now Disconnect Your Phone, Close Flash tools, Press and Hold Volume UP and Power Button Together till it powers UP
Step 8: It'll take you to Recovery Mode, In it Press Install Zip ---> Choose Zip SDCard ---> Select the SuperSu.zip You Placed Earlier in Your SDCard and Press YES Install
Step 9: On Complete Installation, Reboot Your Device, CONGRATULATIONS !!!! You've Successfully ROOTED and Flashed Recovery on Your Device !!!
Note:
If SP Flash Tools Shows You PMT Error Just Download the Preloader.bin From (HERE) and Flash it along with the Recovery through Sp Tools
Procedure is same You'll Just have to tick Preloader option and Load Preloader.bin also
Credits:
Chirag Jain For Porting CTR v2.2 Recovery for XOLO Q1010i
Nishan Goswami For Testing
Chainfire For Making SuperSu
Mediatek For SP Flash Tools
Here's How ROOT and Flash Recovery on Your Phone Without Touching Your PC
Instructions:
-Download and Install Framaroot( v1.9.1 Tested to be Working !!!) HERE
-Open The App and Select SuperSu from Dropdown Menu and press Bahahir,It'll be ROOTED!!!
-Download and Install Mobile Uncle tools From Play Store (HERE)
-Download CTR v2.2 Recovery.img (HERE) and place it in your SDCard Directly (Don't place it inside any Folder)
-Open Mobile Uncle Tools, Select Recovery update, Select Recovery.img From there, Press OK And Then Reboot into Recovery Mode !!!
DONE!!! You've Successfully Flashed Recovery on Your Device!!!
KK users follow this for Rooting without PC
Step 1: Root Your Device
Android 4.4.x
Download Rooting Package (HERE)
The Package contains KingRoot, SuperSu and ES File Explorer
PS- Make sure to turn off data/WiFi while Rooting
Steps:
1. Download the Package and Install Kingroot App from there
2. Open the App and Press on the Green Button on It
3. When A Tick Mark Shows , It means you’re Rooted!!!
STEP 2: Flash Recovery on your device
-Find Custom Recovery (HERE) for your Device
-Download Rashr from Play Store
-Place downloaded recovery.img on your SDCARD
-Open Rashr and Select Recovery from Storage
-In that menu select the .img file and Select Yes, please
--Now Reboot to Recovery
-And You’re done!!!
Flashing Q1010i (4.4.2-KitKat Stock ROM through Recovery
Here's HOW To Flash 4.4.2 Stock ROM Through Recovery (JB n KK)
Instructions
-Make Sure You've Flashed CTR Recovery on Your Device (See Post 1 & 2 for More Details)
-Download Flashable Zip of Stock 4.4.2 ROM from (HERE)
-Download SuperSu Zip from (Here)
-Place Both the Files in Your SD Card, Goto Recovery Mode
-In Recovery Mode Go To Install ---> Install from SD ----> Select the ROM File and press YES to Flash it and Do the Same for the SuperSu Zip after Flashing completes
-Reboot and Enjoy !!!
Credits:
Ritesh Nair for the Stock 4.4.2 Zip
Download links
hi,
i have updated mine to kitkat and can not gain root access
can you upload the recovery and rom pls
HOW To Flash Stock ROM on Your Device Through SP TOOLS
Here's HOW To Flash Stock ROM on Your Device Through SP TOOLS
Requirements:
-SP TOOLS v5.1352.01 (DOWNLOAD HERE)
-STOCK ROM For Your Device (4.4.2 KitKat ROM HERE) (4.2.2 Jelly BeanROM HERE)
-MTK USB Drivers (HERE)
-A PC with Windows 7 or Later
Instructions:
-Download and Extract the Stock ROM you Downloaded Above
-Download and Install the MTK USB Drivers from Above
-Extract SP TOOLs and Run Flash_tool.exe
-In the SP TOOLs Window Select Scatter Loading and Select MT6582_Android_scatter.txt Found in the Stock ROM folder you Just Extracted
-Press Download Button on the Top, Switch OFF and Connect Your Device to the PC
-The Flashing Will Start and You'll see Thew Bottom Status bar changing Color from Red, Purple to Yellow, Once Flaching is Complete You'll see a Download OK Dialog Box
-Now Disconnect your Phone and Power it Up!!!!
Thread Updated
Sent from my C2305 using Tapatalk
Thread Updated !!!!
Not working
bgos10 said:
Introduction :
Hey Guys so we successfully extracted the 4.4.2 stock ROM, Rooted it and Uploaded!
1st Let's Begin with How To ROOT and Flash Recovery on your XOLO Q1010i (works on both JB & KK)
Downloads:
-MTK USB Drivers (HERE)
-MT6582 Scatter File (HERE)
-CTR Recovery by Chirag Jain for Q1010i Only (HERE)
-SP Flash Tools v3.1352.01 (5.1352.01) (HERE)
-SuperSu Zip (Download and Move it to your SD Card) (HERE)
Instructions:
PS - Place all Downloaded Files in the same Place for Easy Access (See Attachment For Screenshots)
Step 1: Install The MTK USB Drivers on Your PC by Clicking on Install.bat
If it Doesn't work See THIS
Step 2: Open SP Flash Tools folder and click on flash_tool.exe (See Attachment For Screenshots)
Step 3: In The Flash Tool window Click on Scatter-Loading, Select MT6582_Android_Scatter.txt and Press Open (See Attachment For Screenshots)
Step 4: In Flash Tool Window Check (Tick) RECOVERY and Click on the Blank Green Space Beside It and select Recovery.img (See Attachment For Screenshots)
Step 5: Press on Download Button at Top, Switch Off Your Device and Connect it to your PC (See Attachment For Screenshots)
Step 6: The Below Bar will Change it's Color Red Then Yellow and Finally show a Download OK Dialog Box (See Attachment For Screenshots)
Step 7: Now Disconnect Your Phone, Close Flash tools, Press and Hold Volume UP and Power Button Together till it powers UP
Step 8: It'll take you to Recovery Mode, In it Press Install Zip ---> Choose Zip SDCard ---> Select the SuperSu.zip You Placed Earlier in Your SDCard and Press YES Install
Step 9: On Complete Installation, Reboot Your Device, CONGRATULATIONS !!!! You've Successfully ROOTED and Flashed Recovery on Your Device !!!
Credits:
Chirag Jain For Porting CTR v2.2 Recovery for XOLO Q1010i
Nishan Goswami For Testing
Chainfire For Making SuperSu
Mediatek For SP Flash Tools
Click to expand...
Click to collapse
I tested it and it is not working for me when I try to download it gives me an error that PMT is changed for this ROM and must be downloaded. Any fix for this?
---------- Post added at 06:32 AM ---------- Previous post was at 06:30 AM ----------
bgos10 said:
Here's HOW To Flash Stock ROM on Your Device Through SP TOOLS
Requirements:
-SP TOOLS v5.1352.01 (DOWNLOAD HERE)
-STOCK ROM For Your Device (4.4.2 KitKat ROM HERE) (4.2.2 Jelly BeanROM HERE)
-MTK USB Drivers (HERE)
-A PC with Windows 7 or Later
Instructions:
-Download and Extract the Stock ROM you Downloaded Above
-Download and Install the MTK USB Drivers from Above
-Extract SP TOOLs and Run Flash_tool.exe
-In the SP TOOLs Window Select Scatter Loading and Select MT6582_Android_scatter.txt Found in the Stock ROM folder you Just Extracted
-Press Download Button on the Top, Switch OFF and Connect Your Device to the PC
-The Flashing Will Start and You'll see Thew Bottom Status bar changing Color from Red, Purple to Yellow, Once Flaching is Complete You'll see a Download OK Dialog Box
-Now Disconnect your Phone and Power it Up!!!!
Click to expand...
Click to collapse
So is this Stock ROM is pre-rooted? or just pure stock ROM? because above rooting method is not working for me so I can try this one.
XenonTNT said:
I tested it and it is not working for me when I try to download it gives me an error that PMT is changed for this ROM and must be downloaded. Any fix for this?
---------- Post added at 06:32 AM ---------- Previous post was at 06:30 AM ----------
So is this Stock ROM is pre-rooted? or just pure stock ROM? because above rooting method is not working for me so I can try this one.
Click to expand...
Click to collapse
4.4.2 is rooted, 4.2.2 is not
Sent from my C2305 using Tapatalk
I got the fix while mobile is switch off we need to press volume up + power button after download button is pressed in sp tool to start downloading in mobile. Also to root on KitKat we need preloader file of kitkat also. So kindly upload it for other users I am downloading whole KitKat stock ROM.
The recovery does not seem to get flashed on JB stock rom. I tried with mobileuncletools...
it says reboot into recovery mode but simply restarts. may be working on kitkat but i have not tried. actually i did not really like the kitkat update. It takes away backup and restore app. and in exchange you get printing support and news widget which never gets the location. also messes up with Mifileexplorer and apex launcher. i have flashed TWRP and after taking backup of stock rom i can play with the kitkat update maybe...
thanks for the effort.
Thread Updated, now tested multiple times and new ctr recovery link added
please root xolo q1000 opus kitkat
q1000 opus is different from q1000.
q1000 opus has broadcom processor.
please root the kitkat build as the jb is rooted but kitkat has not been rooted by any dev
Help.. I'm still geting PMT error.. I also load prelaoder bin along with recovery.. But getting error.. Help .
My phone is rooted kitkat(4.4.2) ..i also pressed volume up and power button.. [emoji37][emoji24]
Sent from my Q1010i using Tapatalk
which is the most reliable method of rooting
framaroot or this method????
Root
Reconfigured said:
which is the most reliable method of rooting
framaroot or this method????
Click to expand...
Click to collapse
Farmaroot will not work after Kit Kat upadate. If you have stock Jelly Bean then use farmaroot method.
If you want rooted kitkat use this method.
Does not work on Xolo Q1010i with Android 4.4.2
bgos10 said:
Introduction :
Hey Guys so we successfully extracted the 4.4.2 stock ROM, Rooted it and Uploaded!
1st Let's Begin with How To ROOT and Flash Recovery on your XOLO Q1010i (works on both JB & KK)
Downloads:
-MTK USB Drivers (HERE)
- MT6582 Scatter File (HERE)
-NEW CTR Recovery by Chirag Jain for Q1010i Only (HERE)
-SP Flash Tools v3.1352.01 (5.1352.01) (HERE)
-SuperSu Zip (Download and Move it to your SD Card) (HERE)
Instructions:
PS - Place all Downloaded Files in the same Place for Easy Access (See Attachment For Screenshots)
Step 1: Install The MTK USB Drivers on Your PC by Clicking on Install.bat
If it Doesn't work See THIS
Step 2: Open SP Flash Tools folder and click on flash_tool.exe (See Attachment For Screenshots)
Step 3: In The Flash Tool window Click on Scatter-Loading, Select MT6582_Android_Scatter.txt and Press Open (See Attachment For Screenshots)
Step 4: In Flash Tool Window Check (Tick) RECOVERY and Click on the Blank Green Space Beside It and select Recovery.img (See Attachment For Screenshots)
Step 5: Press on Download Button at Top, Switch Off Your Device and Connect it to your PC (See Attachment For Screenshots)
Step 6: The Below Bar will Change it's Color Red Then Yellow and Finally show a Download OK Dialog Box (See Attachment For Screenshots)
Step 7: Now Disconnect Your Phone, Close Flash tools, Press and Hold Volume UP and Power Button Together till it powers UP
Step 8: It'll take you to Recovery Mode, In it Press Install Zip ---> Choose Zip SDCard ---> Select the SuperSu.zip You Placed Earlier in Your SDCard and Press YES Install
Step 9: On Complete Installation, Reboot Your Device, CONGRATULATIONS !!!! You've Successfully ROOTED and Flashed Recovery on Your Device !!!
Note:
If SP Flash Tools Shows You PMT Error Just Download the Preloader.bin From (HERE) and Flash it along with the Recovery through Sp Tools
Procedure is same You'll Just have to tick Preloader option and Load Preloader.bin also
Credits:
Chirag Jain For Porting CTR v2.2 Recovery for XOLO Q1010i
Nishan Goswami For Testing
Chainfire For Making SuperSu
Mediatek For SP Flash Tools
Click to expand...
Click to collapse
I tried the step mentioned above more than couple of times but it does not work
just a stupid question,,,does all mt6582 chopset device have the same scatter file,,,even in different phone brands?
kimerika said:
just a stupid question,,,does all mt6582 chopset device have the same scatter file,,,even in different phone brands?
Click to expand...
Click to collapse
Ya unless the scatter is modified manually
I successfully rooted my phone. Thanks a lot. I wanted to change my phone's font cause I got bored of same old font.
Sent from my Q1010i using Tapatalk
Hello everyone, today i will show you how to flash any rom via TWRP with alioth / aliothin
1- Download this version of TWRP (vasi version): https://drive.google.com/uc?id=1oY5WxfXYPRLumCcaPPFGuq9OhtB3CM_X&export=download
2- Install SDK: https://developer.android.com/studio/releases/platform-tools
3- Install MiFlash (only for drivers): https://xiaomiflashtool.com/download/xiaomi-flash-tool-20210226
3- Download the rom you want to install.
4- Extract Mi Flash tool and launching the executable, it will offer to install the drivers click on install then wait for a pop'up in chinese and close the software
5- Extract SDK then put the twrp in the folder (platform-tools-windows)
6- Launch cmd from the folder
7- Write "fastboot boot twrp-aliothin.img" in the cmd
8- Your phone is on the twrp, drag and drop your rom into the internal storage of your smartphone
9- go to install then select your rom
10- Swipe to install (check that inject twrp is checked)
11- reboot in the recovery in the reboot section
12- Click on wipe then format data, write yes then restart in the system
ENJOY!
Go to my benchmark post if u would like to see some bench : https://forum.xda-developers.com/t/send-youre-antutu-benchmark-geekbench-score.4291519/